Mega System Tech iCV-01b manuel d'utilisation

i CAMV iew User Manual Version 2.2 For models: iCV-01a / iCV-01b / iCV-02 / iCV-03 Copyright Information Copyright © 20 04, Mega System Technologie s, Inc. All rights reserved. Reproduction wit ho ut permission is prohibite d. Technical Support and Contact Information Mega Syste m Technol ogies, Inc. Tel: +886-2-879220 60 Fax: +886-2-8792206 6 Web[...]

i CONTENTS Chapter 1: Introduction _____________ ______________ _____________ 1 Section 1. Features ___________ ________________ _____________ ___ 1 Section 2. iCAMV iew as a Remote Surveillance System ___ ___________ 1 Section 3. Package Content s ___________________ _____________ ___ 2 Chapter 2: Inst allation Procedure ___________ ______________[...]

ii 2.4.4 E-mail / FTP _______________ _____________ _____________ __ 39 2.4.5 System Settings ____ _____________ _____________ __________ 42 2.4.6 Image Server ___________ _____________ ______________ ____ 45 2.4.7 Language ______ _____________ ________________ __________ 46 2.4.8 About ______ ________________ ______________ ____________ 47 2.5 V i[...]

i C A M V i e w u s e r m a n u a l - 1 - Chapter 1: Intr oduction Chapter 1: Introduction Section 1. Features iCAMView is a compact stand-alone web-server capable of re mote video surveillance. It can be accessed from anywhere in the world via a standard browser by entering the IP, account and password. Each system can simultaneously support any t[...]

i C A M V i e w u s e r m a n u a l - 2 - Chapter 1: Intr oduction monitor his factory production in China, and if he likes, check on his branch of fice located in Singapore, all simultaneously. Fig.1. iCAMView Network Diagram Section 3. Package Contents Your iCAMView package should contain the following items; 1. iCAMView, 2. Quick Installati on G[...]

i C A M V i e w u s e r m a n u a l - 3 - Chapter 1: Intr oduction Fig. 2. iC A MView F ront V iew Fig.3. iCAMView Back View LED Status Indicators on iCAMView Light color Signal definition Condition desc ription Green Power state On: Normal power Red Error Cond ition On: Error condition occurred Orange Logon s tate O n: When there is user logon and[...]

i C A M V i e w u s e r m a n u a l - 4 - Chapter 2: Installation Procedure Chapter 2: Installation Procedure Before you start using iCAMView, you will need to set-u p both the hardware and software. The following is a flow chart on the installation procedure: Fig.6. iCAMView installation flowchart Connect iCAMView , USB Camera and the Network cabl[...]

i C A M V i e w u s e r m a n u a l - 5 - Chapter 3: iCAMView, USB Camera and the Network Chapter 3: iCAMView, USB Camera and the Network The following details the installation procedure for iCAMView. Section 1. Installation Procedure Step 1: Connect the PC camera into the USB port of iCAMV iew . Step 2: Connect the iCAMView to LA N by usi ng the E[...]

i C A M V i e w u s e r m a n u a l - 6 - Chapter 3: iCAMView, USB Camera and the Network Step 4: The LCD will display the IP, Subnet Mask and Gateway IP. Use a WEB browser to login into the iCAMView IP address. The icon on the LCD shows that a USB camera is connected. The LCD display shows that two USB cameras are attached to the iCAMV iew . Warni[...]

i C A M V i e w u s e r m a n u a l - 7 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware C h a p t e r 4 : Using iCAMView Ut ility to Setup IP & Upd a te Firmware Section 1. Installing iCAMView Utility 1. Insert the enclosed iCAMView CD into the CD-ROM drive. iCAMView setup will auto run. The following menu will s ho[...]

i C A M V i e w u s e r m a n u a l - 8 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware Section 2. Using iC AMView Utility The iCAMView Utility main menu is shown below. The selection menu is located on the left. The Serial Number, current Firmware and IP Address of every iCAMView connected to the LAN will be displayed [...]

i C A M V i e w u s e r m a n u a l - 9 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware 2.1 Setup Wizard Use “Setup Wizard” to take you through the basic configurations neces sary to start using iCAMView. 1. Click to highlight the iCAMView on the right that you want to configure. 2. Click on “Setup Wizard”. 3. i[...]

i C A M V i e w u s e r m a n u a l - 1 0 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware Enter an appropriate internal IP Address, Subnet Mask and Gateway for iCAMView (Refer to Appendix C for an ex planation of IP Addresses) “Obtain an IP address by Bootp” Allow iCAMView to obtain an IP address using Bootp protoco[...]

i C A M V i e w u s e r m a n u a l - 1 1 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware 7. Click “Next >” to proceed with DDNS setup or registration You will need to setup this section if you are using a Dynamic IP If you do not already have a Domain Name regis tered with your ISP, select fro m one of the 4 Fre[...]

i C A M V i e w u s e r m a n u a l - 1 2 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware 8. Click “Next >” to create an administrator account and password. An administrator account is necessary to ensure privacy. If you do not set one, iCAMView can be viewed by anyone on the web. WARNING: Do not lose the adminis[...]

i C A M V i e w u s e r m a n u a l - 1 3 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware 10. Click “Next >” to save and restart iCAMView with the new configurations. 2.2 Launch iCAMView Once you have finished with the above Setup Wizard, either click “Launch iCAMView” or double click on the iCAMView listed o[...]

i C A M V i e w u s e r m a n u a l - 1 4 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware The iCAMView webpage will appear. Click Act iveX for Camera A to view the video images. 2.3 IP Configuration This section allows you to determine IP address configuration for iCAMView. Select the iCAMView on the right display sc re[...]

i C A M V i e w u s e r m a n u a l - 1 5 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware Use this section to set the IP Address of iCAMView. When using iCAMView for the first time, it is advisable to choose the “Using Static IP Address” option. For this option, the user will have to enter an IP Address, Subnet Mask[...]

i C A M V i e w u s e r m a n u a l - 1 6 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware Fig.10. IP Configuration: iCAMView Advanced settings i. Device Password Use this to set an access password to the individual device. Once set, the user must enter the password to acc ess the device. In addition, the IP Address will[...]

i C A M V i e w u s e r m a n u a l - 1 7 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware WARNING : Do not lose this password. If the password is l ost, you can not access the device to make changes. To remove the password, you must first enter a valid “Input De vice Password”, go to “Device Password” and delete[...]

i C A M V i e w u s e r m a n u a l - 1 8 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware Fig.11. Upgrade Firmware: Updates iCAMView firmware If you have downloaded the latest firmware to your local hard drive, check “Upgrade the iCAMView firmware with fi le saved on the local hard drive” and browse to the file loca[...]

i C A M V i e w u s e r m a n u a l - 1 9 - C h a p t e r 4 : Using iCAMView Utility to Setup IP & Update Firmware 2.5 About Click on this button to show software and versi on details. Fig.12. About iCAMView Utility 2.6 R efre sh iCAMView Utility automatically searches for any iCAMView connected to the LAN. However, the user can do a manual sea[...]

i C A M V i e w u s e r m a n u a l - 2 0 - Chapter 5: iCAMView Web Manager Chapter 5: iCAMView Web Manager Section 1. Introduction After you have setup the hardware and set an IP address for iCAMView, you will then be able to go to iCAMView web site to monitor and control the PC cameras. All you have to do is enter the new IP address into any web [...]

i C A M V i e w u s e r m a n u a l - 2 1 - Chapter 5: iCAMView Web Manager 2.2 Information 2.3 Basic Settings 2.4 Advanced Settings 2.5 Viewing images using a PDA / Web Enabled Phone Fig.15. iCAMV iew Main Menu When using iCAMView for the first time, you must set the following to ensure that iCAMView works smoothly; a. Set the necessary parameters[...]

i C A M V i e w u s e r m a n u a l - 2 2 - Chapter 5: iCAMView Web Manager 2.1 Web-Camera Selection Click on either “ActiveX” or “Sun Java” from Camera A or B to view the camera images. By default the first USB camera connected to iCAMView will be denote as “Camera A” Click “Camera B” to view camera B. Note: ActiveX can only functi[...]

i C A M V i e w u s e r m a n u a l - 2 3 - Chapter 5: iCAMView Web Manager To change Video Codec, click Note: The availability of Codec depends on weather the individual user has it installed on the PC or not. Download and install Windows Media Player 10 to enable MPEG4 codec. Digital Zoom In, Digital Zoom Out Rotate Left, Rotate Right Flip the im[...]

i C A M V i e w u s e r m a n u a l - 2 4 - Chapter 5: iCAMView Web Manager Fig.16. iCAMView System Status ii. System Information This section shows iCAMView Network settings. The MAC Address is unique to every iCAMView. All the other values are set by the user in Setup Wizard. 2.2.2 Current Connections This section will show all the users currentl[...]

i C A M V i e w u s e r m a n u a l - 2 5 - Chapter 5: iCAMView Web Manager Fig. 17. i C AMV i ew C urre nt Co nnect ions 2.2.3 Event Log This section will keep a record of all events that occurred in i CAMView. The user can Refresh, Clear or Save the log file. There is also an option to sort the logs according to “Level” or “Type” iCAMView[...]

i C A M V i e w u s e r m a n u a l - 2 6 - Chapter 5: iCAMView Web Manager Fig.19. Individual Camera Configuration “Anti Flicker” Choose between 50Hz, 60Hz or Outdoors. Note : If you do not choose the right frequency, the image will flicker or lines will appear on the images. “Maximum Number of Connections (1-30)” Use this to limit the num[...]

i C A M V i e w u s e r m a n u a l - 2 7 - Chapter 5: iCAMView Web Manager This option determines the iCAMView Network settings. i. IP Address These items were all setup earlier in Setup Wizard. Enter new addresses and click “Apply” to change. Fig.20. iCAMV iew IP Address Settings “IP Address” This item determines iCAMView IP Address. “S[...]

i C A M V i e w u s e r m a n u a l - 2 8 - Chapter 5: iCAMView Web Manager “Communication to Camera Port Number” By default the port number is 9001. iv. Ethernet Fig. 23. iC AMView E thernet Sett ings “Connection Type” This item sets the communication speed between iCAMView and the Network. iCAMView will reboot after “Connection Type” [...]

i C A M V i e w u s e r m a n u a l - 2 9 - Chapter 5: iCAMView Web Manager Choose “Yes” or “No”. iCAMView will automatically send the WAN IP to the DDNS server. This ensure s that DDN S is notified of your current Dynamic IP. vi. PPPoE Use this option to allow iCAMView to di rectly dial-up using your xDSL modem and connect to the Internet.[...]

i C A M V i e w u s e r m a n u a l - 3 0 - Chapter 5: iCAMView Web Manager Operator: This permission level allows the user access to iCAMView menus, but without the permission to amend them. Viewer: This permission level allows the user to access iCAMView at specific time as set in “Permit Hours” for seeing camera. The user does not have write[...]

i C A M V i e w u s e r m a n u a l - 3 1 - Chapter 5: iCAMView Web Manager Fig.27. iCAMV i ew Permit Hours Configuration 2.4 Advanced Settings Please ensure that each of the following option is set correctly. Otherwise, iCAMView may not work properly. 2.4.1 Event Notification 2.4.2 Motion Detection 2.4.3 Image Recording 2.4.4 Email / FTP 2.4.5 Sys[...]

i C A M V i e w u s e r m a n u a l - 3 2 - Chapter 5: iCAMView Web Manager Fig.28. iCAMView Event No tification Pag e i. Event Notificati on “Send Email” To activate Event Notification, you will need to set “Send Email” to “Yes”. Select “No” if you do not wish to send out any notification. “Email Server” A valid “Email Server[...]

i C A M V i e w u s e r m a n u a l - 3 3 - Chapter 5: iCAMView Web Manager Fig.29. iCAMV iew Event Selection List By default, all the events are selected; you must click “Apply” to activ ate them. Close the window to return to the Event Notification Page. Click “Apply” to save your settings . iCAMView will send you the following email noti[...]

i C A M V i e w u s e r m a n u a l - 3 4 - Chapter 5: iCAMView Web Manager Fig.30. iCAMView Even t : Sta rt Up Fig.31. iCAMView Event : User Login Details (Date, Time , Camera & IP) Fig.32. iCAMView Event : PPPoE Connect Successful[...]

i C A M V i e w u s e r m a n u a l - 3 5 - Chapter 5: iCAMView Web Manager Fig.33. iCAMView Event : Ca mera A or B Motion De tected 2.4.2 Motion Detection This page allows the administrator to set motion detection functions for the cameras. i. Camera A (or Camera B) “Enable” To activate motion detect, the administrator has two options; a. “A[...]

i C A M V i e w u s e r m a n u a l - 3 6 - Chapter 5: iCAMView Web Manager Fig. 34. i C AMVi ew Motio n Det ecti on Page “Send to FTP Server” This option allows the administrator to send and store the motion detected images on a FTP site. This is useful for future reference and recording purpose. Click “Yes” to activate. “ftp://<empty[...]

i C A M V i e w u s e r m a n u a l - 3 7 - Chapter 5: iCAMView Web Manager “Loop from ## to ##” This will determine the number of suffixes prec eding the above filena me. Once the last number is reached, the first file will be replaced by the most current image. “Digits” This will determine the number of digits assignable for the above num[...]

i C A M V i e w u s e r m a n u a l - 3 8 - Chapter 5: iCAMView Web Manager . To add all the email addres s at once, click . To remove an entry click , or to remove all entries from the recipient list. Click to confirm and save the abo ve settings. 2.4.3 Image Recording Image recording allows the user to receive an image to either their email accou[...]

i C A M V i e w u s e r m a n u a l - 3 9 - Chapter 5: iCAMView Web Manager This is similar to the function available in Motion Detection Page. Please refer to section 2.4.2 for details. Fig.37. iCAMView Email of Image Re corded 2.4.4 E-mail / FTP This section sets up the necessary Email and FTP server information. The administrator will have to en[...]

i C A M V i e w u s e r m a n u a l - 4 0 - Chapter 5: iCAMView Web Manager Fig.38. iCA MView Email / FTP Page i. FTP Settings “FTP Server” The administrator will have to enter the FTP server address here. “Account Name” Enter the FTP account name here. “Password” Enter the corresponding password. Click “Apply” to save the above set[...]

i C A M V i e w u s e r m a n u a l - 4 1 - Chapter 5: iCAMView Web Manager “Account Name” Enter the account name or login name to the Email server. “Password” Enter the password for the abov e account name. Click “Apply” to save the above changes. iii. Sending Test Mail Fig.39. iCAMView test mai l function You must have the “Email Se[...]

i C A M V i e w u s e r m a n u a l - 4 2 - Chapter 5: iCAMView Web Manager iv. Email Address Book Fig.40. iCAMView E-mail Addr ess Book Entry Enter an Email address in the box provided and click “Add Email Address”. The new email address will be adde d to the li st. The administrator can store up to 20 email addresses here. To delete an Email [...]

i C A M V i e w u s e r m a n u a l - 4 3 - Chapter 5: iCAMView Web Manager i. System Time Fig. 41. Sys tem Ti me “Time Between Automatic Updates ” The administrator can set an interval for time synchronization. Select ei ther 1, 3, 12 hours or 1, 10 & 30 days. “Time Serv er” Choose the nearest Time S erver to your iCAMView location. Th[...]

i C A M V i e w u s e r m a n u a l - 4 4 - Chapter 5: iCAMView Web Manager This section is to manual ly set iCAMView System Time. The format is pre-determined to: yyyy/mm/dd hh:mm:ss. Click “Manual Adju st” to save any manual changes. ii. System Restart Fig.42. Auto Restart setting “Auto Restart System Every” The administrator can choose t[...]

i C A M V i e w u s e r m a n u a l - 4 5 - Chapter 5: iCAMView Web Manager “Manager IP Address” This set the IP address where the admin istrator can manage iCAMView from. It is valid for up to 8 IP addresses. To manage iCAMView from any IP addresses leave it as *.*.*.*. “Community” This is to set a Community name for NMS. The community nam[...]

i C A M V i e w u s e r m a n u a l - 4 6 - Chapter 5: iCAMView Web Manager This is the default port for image stream. User can change this UDP Port to their desired or desi gnated port number. If you i ntend to change, it must be done prior to logging onto the Image Server. “Login Name” Enter your login name for your image server account. You [...]

i C A M V i e w u s e r m a n u a l - 4 7 - Chapter 5: iCAMView Web Manager 2.4.8 About The administrator can use this section to check firmware information, save/restore settings, upgrade firmware and see manufacturer’s details. i. About This section gives crucial information about iCAMVi ew’s Firmware Version, Hardware Version and Serial Numb[...]

i C A M V i e w u s e r m a n u a l - 4 8 - Chapter 5: iCAMView Web Manager Click to check for the la test firmware . iCAMView will automatically download and install the latest firmware Fig.44. iCAMView checking for latest firmware to upgrade 2.5 Viewing images using PDA / Web enabled mobile phone You can view images from your PDA or mobile phone [...]

i C A M V i e w u s e r m a n u a l - 4 9 - Chapter 5: iCAMView Web Manager Fig.46. iCAMView image The images are being displayed one at a time. To send the next picture, simp ly click “Refresh”.[...]

i C A M V i e w u s e r m a n u a l - 5 0 - Chapter 6: iMultiView Chapter 6: iMu ltiView iMultiView is a program to manage multiple iCA MViews in a network. It is able to detect the IP’s of all the iCAMViews installed, and display them in a list form for easy management. Section 1. Installing iMultiView n Click on setup.exe and follow the install[...]

i C A M V i e w u s e r m a n u a l - 5 1 - Chapter 6: iMultiView 2.1 Device : Start iMultiView and press the “E numerate” butt on, iMultiView will start a search for all the iCAMView on the network and list them in the main window. Once detected, the following will show in the main window: This shows that the camera is online and active. This [...]

i C A M V i e w u s e r m a n u a l - 5 2 - Chapter 6: iMultiView : Manually adds the iCAMView to be monitored. “Access by iCAMView Address” Enter either the WEB, without the www (Example : megateccn.myddns.com) or LAN IP of iCAMView (example : 192.168.0.30) “Remote Port” This i s iCAM View UD P port. “Access by Image Server”. Enter the[...]

i C A M V i e w u s e r m a n u a l - 5 3 - Chapter 6: iMultiView : Use this function to change iCAMView Address & Port Number. Display the current Camera settings . Camera Select: Select either camera A or B Account: If you have setup user account, the information must be entered here. Otherwise access will be denied. Password: Enter the above[...]

i C A M V i e w u s e r m a n u a l - 5 4 - Chapter 6: iMultiView 200% Camera Rotation: Use this function to keep the camera up-right. Mirror the Image: To mirror the image. Maximum frame per second: Select from 0.01 fps to a maximum of 30.00 fps. Display the Motion Detect ion Settings . Enable Motion Detect: Click the checkbox to enable Motion Det[...]

i C A M V i e w u s e r m a n u a l - 5 5 - Chapter 6: iMultiView Image Compression: Choose from the list of available compressions. Note: This list is dependent on the Codec that is available or already installed on the local PC. To record in MPEC-4, make sure you install or upgrade to Windows Media Player v10. Recording A VI File Path Location wh[...]

i C A M V i e w u s e r m a n u a l - 5 6 - Chapter 6: iMultiView change the display view or add a new folder here. Stop after idle for: Set the value between 1 to 100 seconds Send AVI file Notification by Email: Send an AVI file via email in the event any motion is detected. Configure Settings for Email Notification You will need to enter the corr[...]

i C A M V i e w u s e r m a n u a l - 5 7 - Chapter 6: iMultiView SNMP Settings Host Name: Provide a Name to identify this device. HTTP Port: Enter the HTTP port assigned for iCAMView. Location: Provide a location for SNMP manager to track device. Manager: Enter a manager’s name for identification. “ Using SNMP to upda te network ports ” Chec[...]

i C A M V i e w u s e r m a n u a l - 5 8 - Chapter 6: iMultiView Move the curser over the edges of the pi cture and it will turn into an arrow. Click and hold to pan / tilt the camera (if the camera supports this function) Click this button to record the current image on screen. A window will come up, click “Start” to start recording to the de[...]

i C A M V i e w u s e r m a n u a l - 5 9 - Chapter 6: iMultiView Click the left side of the viewi ng window to bring out more control features. Clicking once wil l cause the camera to pan left by 1 deg. Click and hold and the camera will pan increasingly faster to the left. Clicking once wil l cause the camera to pan right by 1 deg. Click and hold[...]

i C A M V i e w u s e r m a n u a l - 6 0 - Chapter 6: iMultiView 2.2 V ie w : Switch between Large or Small icon view Large icon display Small icon display 2.3 Sy stem : Display the Event Log (IP address, Port, date, Time, description of event) of the selected iCAMView. : Set the SNMP P arameter.[...]

i C A M V i e w u s e r m a n u a l - 6 1 - Chapter 6: iMultiView 2.4 User Change Password : “Change Password…” Use this feature to change the current User login password to iMultiView. Both “Admin istrator” or “User” can change their own Account passwords. “Account Management…” Use this section to Add, Delete or Change the Pass[...]

i C A M V i e w u s e r m a n u a l - 6 2 - Chapter 6: iMultiView Account: Enter the preferred account name (max of 10 characters). The Acc ount name cannot be edited. Password: Enter a password (max of 10 characters). The password is case sens itive and can be left blank. Permission: Choose “Administrator” or “User”. An “Administrator”[...]

i C A M V i e w u s e r m a n u a l - 6 3 - Chapter 6: iMultiView Step 3: Release the mouse button anywhere on the desktop and a new desktop icon is created there. Step 4: Double click on the icon on the desktop, to view the images.[...]

i C A M V i e w u s e r m a n u a l - 6 4 - Appendix A: Router Configuration Appendix A: Router Configuration The following section describes the initial configuration of the router and port forwarding for your router. If your router is not listed here, please refer to the manufacturer’s website for assistance with configuring your router to work[...]

i C A M V i e w u s e r m a n u a l - 6 5 - Appendix A: Router Configuration MN-500 Wireless Base Station NETGEAR RP614 Web Safe Router MR814 Wireless Router MR314 Cable/DSL Wirel ess Router FVS318 ProSafe VPN Firewall Proxim ORiNOCO BG-2000 Broadband Gateway - Siemens SpeedStream 2602 2-Port DSL/Cable Router SpeedStream 2623 Wireless DSL/Cable Rou[...]

i C A M V i e w u s e r m a n u a l - 6 6 - Appendix A: Router Configuration 3Com (http://www.3com.com) 3C857-US – OfficeConnect Cable/DSL Gateway 3CRWE52196 – OfficeConnect Wireless Cable/DSL Gateway 1. Log into your router using your router IP. 2. On the main page, select Firewalls on the left side of the page. 3. Select the Virtual Servers t[...]

i C A M V i e w u s e r m a n u a l - 6 7 - Appendix A: Router Configuration Belkin (http://www.belkin.com) F5D6230-3 – Wireless Cable/DSL Gateway Router 1. Log into your router using your router IP. 2. On the main page, select Virtual Server on the left side of the page under the Securit section. 3. Enter the following information on the page: L[...]

i C A M V i e w u s e r m a n u a l - 6 8 - Appendix A: Router Configuration Private Port 80 to 80 Line #2 Enable: Checked in Descr iptio n: iCAM View – Ca mera Internet Port: 9001 to 9001 Type: UDP Private IP address: Type in the camera’s IP address . (Look on the iCAMView Address LCD display for the last 3 digits of the camera’s IP address)[...]

i C A M V i e w u s e r m a n u a l - 6 9 - Appendix A: Router Configuration D-Link (http://www.dlink.com) DI-604/DI – 614+/DI-624 1. Log into your router using your router IP. 2. On the main page, clic k on Advanced at the top of the page. 3. On the left side of the page, click on Virtual Server . Note: Make sure DMZ host is disabled. If DMZ is [...]

i C A M V i e w u s e r m a n u a l - 7 0 - Appendix A: Router Configuration Enabled/Disabled: Enabled For ID#2 Service Port: 9001 Service IP: Type in the camera’s IP address , for example: 192.168.0.5 Enabled/Disabled: Enabled 4. Save your settings. iCAMView should now be c onfigured to work with your router and be accessible from the internet. [...]

i C A M V i e w u s e r m a n u a l - 7 1 - Appendix A: Router Configuration Dell (http://www.dell.com) TrueMobile 2300 Wirel ess Broadband Ro uter 1. Log into your router using your router IP. 2. On the main page, clic k on Advanced Settings at the top of the page. 3. Go to the Port Forwarding section and select Custom Port Forwarding Settings. 4.[...]

i C A M V i e w u s e r m a n u a l - 7 2 - Appendix A: Router Configuration Linksys (http://www.linksys.com) BEFSR41 – EtherFast Cable/DSL Router BEFSX41 – Instant Broadband EtherFast Cable/DSL Firewall Router with 4-Port Switch/VPN EndPoint BEFW11S4 – Wireless Access Point Router with 4-Port Switch – Version 2 1. Log into your router usin[...]

i C A M V i e w u s e r m a n u a l - 7 3 - Appendix A: Router Configuration Microsoft (http://www.microsoft. com/hardware/broadbandnetworking) MN-100 – Wired Base Station MN-500 – Wireless Base Station 1. Log into your router using your router IP. 2. Open the Bass Station Management Tool, and then click Security . 3. On the Security menu, clic[...]

i C A M V i e w u s e r m a n u a l - 7 4 - Appendix A: Router Configuration NETGEAR (http://www.netgear.com) RP614 – Web Safe Router MR814 – Wireless Router 1. Log into your router using your router IP. 2. Click Advanced -> Port Forw arding on the left s ide of the page. 3. Click Add Customer Service. 4. Enter the following information on t[...]

i C A M V i e w u s e r m a n u a l - 7 5 - Appendix A: Router Configuration Line #2: Starting Port: 9001 Ending Port: 9001 Server IP Address: Type in the camera’s IP address , for example: 192.168.0.5 5. Click Apply to save the settings. iCAMView should now be configured to work with your router and be accessible from the internet. FVS318 – Pr[...]

i C A M V i e w u s e r m a n u a l - 7 6 - Appendix A: Router Configuration D. Local Server Address: Enter the IP address of the camera E. WAN Users Address: Any F. Click Apply . 12. Click Add again. A. For Service name select: iCAMView Cam B. Action: ALLOW always C. Local Server Address: Enter the IP address of the camera D. WAN Users Address: An[...]

i C A M V i e w u s e r m a n u a l - 7 7 - Appendix A: Router Configuration Proxim (http://www.proxim.com) ORiNOCO BG-2000 Broadband Gateway 1. Log into your router using your router IP. 2. On the router’s main page, click on Setup at the top of the page. 3. On the left side of the page, click on Advanced settings -> Port Forwarding . 4. Chec[...]

i C A M V i e w u s e r m a n u a l - 7 8 - Appendix A: Router Configuration Siemens (http://www.speedstream.com) SpeedStream 2602 – 2-Port DSL/Cable Router SpeedStream 2623 – Wireless DS L/Cable Router SpeedStream 2624 – Wireless DS L/Cable Router 1. Log into your router using your router IP. 2. After you are logged in, click on Advanced Set[...]

i C A M V i e w u s e r m a n u a l - 7 9 - Appendix A: Router Configuration 7. Under Internal Port No type in: 80 8. Under External Port No type in: 80 9. Click on Add to save these settings. 10. Under the first box, next to the Enable checkbox , type in: iCAMView Cam . 11. Under PC (Server), select your camera or the camera’s IP address from th[...]

i C A M V i e w u s e r m a n u a l - 8 0 - Appendix A: Router Configuration SMC (http://www.sm c.com) SMC2404WBR – Barricada Turbo 11/22 Mbps Wireless Cable/DSL Broadband Router SMC7004VBR – Barricada Cable/DSL Broadband Router SMC7004CWBR – Barricada Wirele ss Cable/DSL Broadband Router 1. Log into your router using your router IP. 2. After[...]

i C A M V i e w u s e r m a n u a l - 8 1 - Appendix A: Router Configuration For ID #2: Service Port: 9001 Private IP: Type in the camera’s IP address , for example: 192.168.0.5 (Look at iCAMView’s IP Address LCD display for the last 3 digits of the camera’s IP address) Enable: Checked in 4. Click Save to save the settings. iCAMView shou ld n[...]

i C A M V i e w u s e r m a n u a l - 8 2 - Appendix C: IP Address, Subnet and Gateway Appendix B: Methods to Up date iCAMView Firmware Y ou can update iCAMV iew’s firmware using any of the following methods. Method 1: Using iCAMView Utility (1) Use “Do wnload Firmware” function under iCAMView Utility to update it Method 2: Through iCAMView W[...]

i C A M V i e w u s e r m a n u a l - 8 3 - Appendix C: IP Address, Subnet and Gateway Appendix C: IP Address, Subnet and Gateway This section discusses Communities, Gateways, IP Addresses and Subnet masking Communities A community is a string of printable ASCII characters that identifies a user group with the same access privileges. For example, a[...]

i C A M V i e w u s e r m a n u a l - 8 4 - Appendix C: IP Address, Subnet and Gateway Subnetting and Subnet Masks Subnetting divides a network address into sub-network addresses to accommodate more than one physical network on a logical network . For ex ampl e: A Class B company has 100 LANs (Local Area Networks) with 100 to 200 nodes on each LAN.[...]

i C A M V i e w u s e r m a n u a l - 8 5 - Append ix D: Glossary Appendix D: Glossary The Glossary section defines the terms used in this User Manual Term Definition Ethernet Local Area Network technology, originally developed by Xerox Corporation, can link up to 1,024 nodes in a bus network. Ethernet provides raw data transfer in a rate of 10 meg[...]