Miele 07 923 420 manuel d'utilisation

Operating and installation instructions Refrigerator K 9212 i K 9214 iF K 9412 i K 9414 iF To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 923 420 e n-G B[...]

Guide to the appliance .............................................4 Optional accessories ................................................6 Bottle rack ......................................................6 Caring for the environment ..........................................7 Warning and Safety instructions .....................................8[...]

Ice cubes ........................................................2 6 Cooling drinks ....................................................2 6 Defrosting .......................................................2 7 Refrigerator section ................................................2 7 Freezer compartment ..............................................[...]

a Refrigerator section temperature display b Super cool button and indicator light c On/Off and temperature selector dial Guide to the appliance 4[...]

a Freezer compartment* b Adjustable shelves c Condensate channel and drain hole d Fruit and vegetable containers e Butter and cheese compartment f Egg tray g Door shelf h Interior lighting i Bottle shelf * Depending on model Guide to the appliance 5[...]

Optional accessories Bottle rack (depending on model) This bottle rack is available from the Miele Spare Parts Department or your dealer. Guide to the appliance 6[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal of your old applia[...]

This appliance complies with all relevant legal safety requirements. Improper use can, however, present a risk of both personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes o[...]

Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. It could be dangerous. ~ If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger. ~ This appliance contains the coolant [...]

~ The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt, the household wiring system[...]

Correct use ~ Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Thermostats switching on may produce sparks which could present a fire hazard. Flammable compounds could explode. ~ Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the appliance. Danger of spark[...]

~ Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time. ~ If storing food which contains a lot of fat or oil, make sure that it does not come into contact with plastic components as this could cause stress cracks. ~ Do not block the ventilation gaps in the plinth or the top of the[...]

Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high amb[...]

Before using for the first time Important: To ensure the correct functioning of the appliance, let it stand for between 1½ and 2 hours after transporting it to its final location before connecting it to the mains. Protective foil The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent damage [...]

Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.g. whilst on holiday: ^ switch the appliance off, ^ disconnect it from the mains. ^ defrost the freezer compartment (depending on model), ^ clean the appliance out and ^ leave the door ajar to air the appliance. If, during a long absence[...]

It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. The temperature in the appliance will rise:[...]

Temperature display The temperature display on the control panel always shows the required temperature. If you want the temperature in the refrigerator section to be 5 °C, ^ turn the temperature selector clockwise from 0 until the 5 lights up in the temperature display. The average temperature in the freezer section will then be approx. -18 °C . [...]

Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink. ^ Press the Super cool button. The Super cool indicator li[...]

Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. Warmest area The warmest area is in the top section of the door. Use this for[...]

When shopping for food The freshness of food when first placed in the appliance is an important factor in determining how long it stays fresh. Time out of the refrigerator e.g. during transportation should be kept to a minimum. For example, do not allow food to stay in a hot car for too long. Once food has started to deteriorate, this process canno[...]

Unpacked meats and vegetables Unpackaged meat and vegetables should be stored separately. To avoid any microbiological cross-contamination, these foods may only be stored together if they are wrapped. Protein rich foods Please note that foods rich in protein deteriorate faster than others. Shellfish, for example, deteriorates faster than fish, and [...]

Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level. The raised edge at the back must face upwards to prevent food from touching the back of the applia[...]

Using the freezer compartment Use the freezer compartment to: – store frozen food, – make ice cubes, – freeze small quantities of fresh food. Up to 2 kg of food can be frozen in 24 hours. Freezing fresh food Fresh food should be frozen as quickly as possible. This way the nutritional value of the food, its vitamin content, appearance and tast[...]

Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals. – The following types of food are not suitab[...]

Before placing food in the freezer compartment ^ Turn the temperature selector to a middle to low temperature for approx. 4 hours before placing fresh food in the freezer compartment. This helps food that is already in the freezer to stay frozen. Placing food in the freezer section ^ Place the food flat on the bottom of the freezer compartment so t[...]

Ice cubes ^ Fill the ice tray three quarters full with water and place it on the bottom of the freezer compartment. ^ Once frozen, use a blunt instrument, for example a spoon handle, to remove the ice tray from the freezer. ^ Ice cubes can be removed easily from the tray by twisting the tray gently or by holding it under cold running water for a sh[...]

Refrigerator section The refrigerator defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator section whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the refrigerator. The condensate is drained away via a channel and drain hole in[...]

To defrost Carry out the defrosting procedure as quickly as possible if food has not been placed in another freezer. The longer the food is left out at room temperature, the faster it defrosts. ^ Switch the appliance off. ^ Disconnect it from the mains. Switch off at the wall and withdraw the plug from the socket, or disconnect the mains fuse or re[...]

A range of Miele branded cleaning and conditioning products is available to order from Miele or www.miele-shop.com. Do not let water get into the temperature selector or into the light. Do not let water get into the drainage channel and drain hole when cleaning. Do not use steam cleaning apparatus to clean the appliance. Steam could reach the elect[...]

^ Clean the interior shelves and drawers by hand. These are not suitable for cleaning in a dishwasher. ^ Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered. Use a straw or similar to clear the drain if necessary. ^ After cleaning, wipe the interior and accessories with a damp cloth and dry with a so[...]

Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure that current is not supplied to the a[...]

Operating in a room which is too cold will cause the cooling system to switch off for too long causing the freezer compartment to become too warm. . . . food has frozen together. Use a blunt instrument, e.g. a spoon handle or plastic scraper, to prise it apart carefully. . . . there is a thick layer of ice in the freezer compartment. ^ Check whethe[...]

. . . the floor of the refrigerator section is wet. The drain hole is blocked. ^ Clean the condensate channel and drain hole. If you still cannot remedy the fault having followed these suggestions, please contact the Miele Service Department. To prevent unnecessary loss of temperature it is advisable not to open the doors while waiting for the appl[...]

Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr[...]

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc[...]

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensur[...]

This appliance must be built in, otherwise it could tip up. Location This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The room temperature should not go above or below the climate rang[...]

Before installing the appliance ^ Before installation remove the cover strip, sealing strip and other accessories from inside the appliance and from the external rear wall of the appliance. ^ Do not remove the spacers from the back of the appliance. These ensure the gap required between the back of the appliance and the wall is maintained. ^ Remove[...]

Niche height [mm] A K 9212 i, K 9214 iF 874 - 890 K 9412 i, K 9414 iF 1220 - 1236 Building-in dimensions 39 ³ 200 cm 2 A £ 2100 ³ 200 cm 2 ³ 38 560-568 ³ 550 [mm][...]

Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging, you will need various sizes of Torx screwdrivers and a slotted screwdriver. Appliance door ^ Open the appliance door. ^ Pull off covers a and b . ^ Unscre[...]

Freezer compartment door ^ Lower the cover on hinge plate a . ^ Unscrew hinge plate b , and remove freezer compartment door c together with the hinge plate. ^ Unscrew door catch d . ^ Screw door catch d into place on the opposite side, having turned it by 180 °. ^ Fit the freezer compartment door c in position at the top e , then tighten the hinge[...]

All building-in instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. Building into a peninsular run When built into a peninsular run, the rear of the building in niche must be fitted with a kitchen furniture panel. Aligning the housi[...]

Building in the appliance ^ Remove panel a . ^ Secure bracket b with screws c (4.8 x 16 mm). ^ Attach sealing strip d to the door opening side so that it sits flush at the front with the side of the appliance. If necessary the sealing strip can be trimmed to size along the lower edge of bracket b . ^ Push the appliance into its housing unit. When d[...]

Securing the appliance and fitting the furniture door ^ Push the appliance against the housing wall on the side on which the door opens so that the sealing strip is pressed into the housing wall h . ^ Secure the appliance at the top with screw i (4 x 19 mm) into bracket b , pushing the appliance against the furniture wall as you do so. Then secure [...]

45[...]

46[...]

47[...]

Alteration rights reserved / 4710 K 9212 i, K 9214 iF, K 9412 i, K 9414 iF M.-Nr. 07 923 420 / 00[...]