Miele W 3514 WPS manuel d'utilisation

Operating instructions f or W ashing machine W 3514 WPS T o avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. G M.-Nr . 06 622 900[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are envir onmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suf focation! Rather than just thr[...]

Caring for our en vironment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance or machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W arning and safe[...]

Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Interrupting a programme [...]

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Optiona[...]

T o avoid the risk of accidents and damage to the machine please read these instructions carefully befor e using it for the first time. They contain important infor mation on its safety , use and maintenance. Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner o[...]

The Miele "W ater protection system" protects fr om water damage provided the following conditions have been met: – the machine is correctly plumbed in and connected to the electricity supply . – if a fault has been identified, the machine must be examined by a competent person before further use, and repair ed if necessary . Faulty c[...]

If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however , you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. If in doubt, contact the Miele Customer Ser - vice Dept. or your Miele Dealer . T extiles which have[...]

Control panel a Programme b uttons e- For selecting a washing programme. b Soiling button For specifying the degree of soiling of the laundry . W ater plus button For increasing the water level. c T emperature button For selecting a temperature. d Spin speed button For selecting a final spin speed. e PC / Optical interface This is used by service t[...]

Display The display shows: – the programme duration (Time left display) – delay start – the programmable functions Programme duration After the start of a programme, the estimated programme duration will appear in the display in hours and minutes. When delay start is being used, the programme duration will appear after the delay start time ha[...]

Before using the machine for the first time ensure that it is corr ectly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of water leaks during use. For safety reasons, spinning is not possible until the machine has been prepar ed for using for the first[...]

Energy and water consumption – W ater consumption and energy usage are determined by the size of the load. T o make the most out of your machine, load the maximum dry load for the programme you ar e using. – Use the Automatic and Express programmes for small loads. – When smaller amounts of laundry are washed using the Cottons programme, the [...]

Brief instructions The headings numbered A , B , C , . . . show the operating sequence and can be used as brief instructions. A Sort the laundr y ^ Empty all pockets. , Foreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and components in the machine. ^ Badly soiled areas, stains etc. should be cleaned as soon as pos[...]

B Switch on the washing machine C Load the drum ^ Press the Door button to open the drum door . ^ Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. The most efficient use of energy and water is achieved when a full load is washed. H[...]

Specify the degree of soiling of the laundry Press the top button to select the degree of soiling. Normal is the default setting. Use the lower button to select the W ater plus option. ^ Press the top button r epeatedly until the degree of soiling you want lights up. ^ Press the W ater plus button if you want to activate this function. Y ou cannot [...]

E Add deter gent It is important to dispense the correct amount, because . . . . . . too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch. – Greasy particles clinging to the laundry . – Limescale deposits on the heater elements. . . . too much detergent results in: – Ex[...]

F Select Delay Start, if wished Delay start allows you to delay the star t of a programme fr om 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example. ^ Press the Delay start button. Each press on the button incr eases the delay start time: – by 30 minutes up to 10 hours, – by 1 ho[...]

The washing machine will adjust the programme to suit the degr ee of soiling selected. Light No visible dirt or stains. The duration of the main wash is reduced. Normal Visibly dirty and/or just a few slight stains. The standard wash pr ogramme will be carried out. Heavy Visible dirt and stains and/or dried on soiling. A fifteen minute pre-wash wil[...]

Final spin speed Programme rpm Automatic 1200 Cottons 1400 Minimum iron/Delicates 1200 Woollens 1200 Silks 400 Express 1400 Dark garments 1200 Shirts 600 Denim 900 Drain/Spin 1400 Y ou can reduce the final spin speed. However , you cannot select a final spin speed higher than that shown in the chart above. Rinse and interim spin There is a spin aft[...]

A utomatic cold to 40°C 76e21f Max. load 3.5 kg Fabric Mixed loads of garments suitable for the Cottons and Minimum iron/Delicates programmes. Sort according to colour . Cottons 30°C to 95°C 9ö8E76 Max. load 6.0 kg Fabric Cotton and linen fabrics, e.g. bed linen, table linen, towelling, jeans, underwear , T -shirts, nappies. Notes – Only use [...]

W oollens cold to 40°C /ac Max. load 3.0 kg Fabric Machine-washable or hand-washable wool or wool blend fabrics. If the care label does not specify a temperatur e wash using the cold setting. Silks cold to 30°C /c Max. load 2.0 kg Fabric Hand-washable fabrics with no wool content, e.g. satin, lace and silk. Note Place socks, tights, bras etc. in [...]

Main wash Rinses Spinning W ater level W ash rhythm W ater level Rinses Interim spin Final spin Automatic ( a e 2-3 2) LL Cottons d a ( 2-4 1) LL Minimum iron/ Delicates ( b e 2-3 2) LL Woollens ( c ( 2 LL Silks e d e 2 – L Express d a ( 2-3 2) LL Dark garments ( a ( 3 LL Shirts ( a ( 2 LL Jeans ( a ( 3 – L Drain/Spin –– – – – L d = L[...]

This machine has fully electronic controls with automatic load recognition. It takes in the right amount of water requir ed for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary . The programme sequences outlined in the chart are based on the basic programme with a full[...]

/ Hand wash (If no temperature is specified use the lowest temperature or cold) h Do not wash apf Dry clean D Do not dry clean w Clean professionally x Suitable for chlorine bleaching z Do not use chlorine bleach T umble dry q At normal temperature r At low temperature s Do not tumble dry Ironing I Hot iron H Medium hot iron G Cool iron J Do not ir[...]

Cancelling a programme Y ou can cancel a programme at any time after it has started. ^ Press the Start/Stop button briefly . The suds will be pumped away and the programme is cancelled. If you want to remove the laundry: ^ Press the Door button. If you want to select a differ ent programme: ^ Switch the washing machine off with I-On/0-Off button. ^[...]

Adding or remo ving laundry after a programme has started ^ Press the Door button to open the drum door . ^ Add or remove items. ^ Close the drum door . The programme will continue automatically . Please note: Once a programme has started the machine cannot recognise any adjustment to the load. For this reason, if laundry is added or removed after [...]

System lock The system lock prevents your machine being used without your knowledge. If the system lock has been activated it is not possible to start a programme. T o activ ate the system lock Before you begin, first ensur e that: – The washing machine is switched off. – The drum door is closed A Press the W ater plus and T emperature buttons [...]

All modern detergents produced for automatic washing machines are suitable, including liquid, compact (concentrated), tablets, liquid tablets and special application detergents. Use dispensing aids, e.g. balls, if these are supplied with the detergent. T ablets are suitable for full loads but note that it may be impractical to reduce tablets for sm[...]

Fabric conditioner s and liquid starc h Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying. Starch stif fens and gives body to items of laundry , e.g. shirts, tablecloths and bed linen. A utomatic dispensing of fabric conditioner or liquid starc h to laundry at the end of a programme ^ Add the fabric c[...]

, Disconnect the machine from the mains electricity supply and withdraw the plug from the socket prior to cleaning the machine. ^ Clean the casing with a mild non-abrasive detergent or soap and water . Wipe dr y with a soft cloth. ^ Clean the fascia panel with a damp cloth and wipe dry with a soft cloth. ^ The drum can be cleaned using a suitable p[...]

Cleaning the detergent dispenser drawer Remove detergent residues r egularly . ^ Pull out the detergent dispenser drawer until a resistance is felt. Pr ess down the release catch and at the same time pull the drawer right out of the machine. ^ Clean the detergent drawer with warm water . ^ Clean the siphon. 1. Remove the siphon from compartment § [...]

Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there ar e frequent interruptions to the external water supply . ^ First turn off the stopcock. ^ Unscrew the thr eaded un[...]

What to do, if . . . With the help of the following notes, minor faults in the perfor mance of the appliance, some of which may result fr om incorrect operation, can be put right without contacting the Service Department. , Repair work to electrical equipment should only be carried out by a suitably qualified person in accordance with local and nat[...]

The wash programme stops and a fault indicator light comes on. Prob lem P ossible cause Remedy A The buzzer sounds and the Drain chec k light flashes. "– – –" appears in the display . The water outlet is blocked or restricted. Clean the drain filter and the drain pump as described in "Problem solving guide – Opening the drum [...]

General prob lems Prob lem P ossible cause Remedy The Excess detergent chec k light comes on. Excessive foam has built up during washing. Use less detergent next time and follow the manu - facturer's instructions on dosage given on the pack - aging. The Rinses Sequence indicator light flashes. There is a fault. Start the programme again. If th[...]

An unsatisfactory wash result Prob lem P ossible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. – Use a general purpose detergent containing a bleaching agent. – Pour stain removers into compartment j of the dispenser drawer[...]

The drum door does not open when y ou press the Door button P ossible cause Remedy The machine is not connected to the electricity supply . Insert the plug in the socket and switch on. The machine is not switc hed on. Switch the machine on with the I-On/0-Off button. The safety lock has been activated. Deactivate the safety lock as described in &qu[...]

Opening the drum door in the event of a b locked drain outlet and/or power failure ^ Switch the washing machine off. There is a lever behind the detergent drawer fascia panel. ^ Remove the lever . ^ Use it to open the access flap. Blocked drain outlet If the drain outlet is blocked, up to 25 litres of water will be r etained in the machine. , Cauti[...]

Once the flow of water ceases: ^ Remove the drain filter completely . ^ Clean it thoroughly . ^ Remove any foreign objects (e.g. buttons, coins, etc.) and fluff fr om the filter housing. T ur n the impeller by hand to check that it rotates fr eely . Any foreign object causing an obstruction should be removed. ^ Put the drain filter back in place an[...]

In the event of any faults which you cannot remedy yourself, please contact: – your Miele dealer or – the Miele Service Department (see back cover for contact details). When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance, both of which are shown on the data plate visible above the po[...]

Front vie w a Inlet hose with "W aterproof" system b Electricity supply cable c - f Flexible drain hose (with detachable swivel elbow) g Fascia panel with controls h Detergent dispenser drawer i Drum door j Access to drain filter , drain pump and emergency release k Handle recesses for moving the machine l Four height adjustable feet Inst[...]

Rear view a Protruding lid for holding when moving the machine b Electricity supply cable c Inlet hose with "W aterproof" system d Drain hose e T ransit bar covers f Restraining clip for inlet hose and drain hose g Restraining clips for transit bars when removed Installation and connection 42[...]

Installation surface A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note the following points: ^ The machine must be level and securely positioned. ^ T o avoid vibrations during spinning, the machine shoul[...]

^ Using the spanner supplied turn the left-hand transit bar 90°, then ^ withdraw the transit bar . ^ T ur n the right-hand transit bar 90°, then ^ withdraw the transit bar . Installation and connection 44[...]

^ Fit the covers on to the two holes. Then plug the holes as shown with the caps. ^ Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over r etainers a . , The washing machine must not be moved without the transit bars in place. Store the transit bars as shown or keep them in a safe place for future use. [...]

Levelling the mac hine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may incr ease electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet ar e used to level the machine. All four feet are screw[...]

The fitting of building under kits and stacking kits must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit. Building under a continuous worktop/in a kitc hen run If you wish to push your machine under a worktop and there is space to do this without removing the lid , the conversion kit[...]

The Miele W aterproof system The Miele W aterproof system pr otects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose – The inlet hose is fitted with an additional electrical safety valve which works like an [...]

Connection to the water supply , The plastic casing of the safety valve contains electrical components. The W aterproof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas wher e there is the risk of water or other liquids reaching it. Do not get wet. The protective sl[...]

Maintenance and care If you intend to unscrew the Miele W aterproof system hose fr om the stopcock it is essential to disconnect the machine from the electricity supply first. Only use a Miele W aterproof system hose should you need a replacement. In order to pr otect the water inlet valve, the dirt filter in the water inlet valve connection must n[...]

Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if requir ed, with a sharp twist and pull. If requir ed, the drain hose can be extended to[...]

Electrical connection U .K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations. Ensure power is not supplied to the appliance until after installation work has been carried out. The appliance is supplied with a mains cable with moulded plug ready fo[...]

Max. load Consumption data Energy W ater Degree of soiling in kWh in litres Normal Light Automatic 40°C 3.5 kg 0.35 - 0.50 40 - 55 1 h 18 min 1 h 09 min Cottons 95°C 6.0 kg 1.99 49 2 h 09 min 60°C 1) 6.0 kg 1.02 49 1 h 49 min 60°C 3.0 kg 0.73 39 1 h 03 min 40°C 1) 6.0 kg 0.65 55 1 h 59 min 40°C 2) 3.0 kg 0.36 39 59 min Minimum ir on/ Delicate[...]

Height 85.0 cm Width 59.5 cm Depth 58.0 cm Depth with door open 97.5 cm Weight 94 kg Maximum floor load 1600 Newton (approx. 160 kg) Capacity 5 kg dry laundr y V oltage see data plate Rated load see data plate Fuse rating see plug Consumption data see "Consumption data" W ater flow pressur e minimum 100 kPa (1 bar) W ater flow pressur e m[...]

Progr ammable functions f or changing standard settings The programmable functions can be used to tailor washing pr ogrammes to suit your individual requir ements.[...]

W ater plus system This is used to select the water intake setting for the W ater plus button. There ar e three dif ferent options: Setting 1 (the machine is delivered with this option selected) The water intake is increased in the wash and rinse stages. Setting 2: An extra rinse is carried out. Setting 3: The water intake is increased in the wash [...]

Gentle action Activating gentle action reduces the drum action and is suitable for washing slightly soiled articles more gently . Gentle action can be activated for the Cottons programme. If Gentle action is programmed into the machine, every wash cycle in this programme will be carried out with gentle action rhythm. The washing machine is delivere[...]

Suds cooling in the Cottons programme When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. Suds cooling takes place when temperatures of 95°C and 75°C ar e selected. Suds cooling should be activated: – to prevent the danger of scalding if the [...]

Increase the duration of the main wash This setting is used to select the length of time (15, 30 or 60 minutes) by which the main wash is increased when the Heavy Degree of soiling option is selected. The washing machine is delivered with the increase for the duration of the main wash set at 15 minutes. Follow steps A to G to pr ogramme and store i[...]

Buzzer When the buzzer function has been activated, an audible tone sounds at the end of a programme or when Rinse hold is reached. There ar e three dif ferent options: Setting 1 = off The Buzzer button is deactivated. Setting 2 = nor mal The buzzer sounds at the end of a programme or when Rinse hold is reached (default setting) Setting 3 = loud Th[...]

Ke ypad tones An audible tone sounds each time a button is pressed. The washing machine is delivered with the keypad tone switched off. Follow steps A to G to pr ogramme and store in memory . Before you begin, first ensur e that : – The washing machine is switched off. – The drum door is properly closed. A Press the Start/Stop button and keep i[...]

Memory function If an Extra(s) is selected for a programme, and / or the spin speed is altered, the machine stor es these changes in memory at the star t of a programme. When that particular programme is chosen again, the display will show the Extra(s) and / or spin speed which have been stored for that pr ogramme in the memory . The washing machin[...]

Pre-wash with the Heavy Degree of soiling option This setting is used to activate or deactivate an automatic pre-wash whenever the Heavy Degree of soiling option is selected. The machine is delivered with the auto - matic pre-wash activated. Follow steps A to G to pr ogramme and store in memory . Before you begin, first ensur e that : – The washi[...]

Alteration rights reserved/3205/W 3514 WPS M.-Nr . 06 622 900 / 00 e n-G B[...]