New World NW701G manuel d'utilisation

Leading the way in the production of energy saving appliances these built in electric pr oduct have passed the Engery Saving T rust Recommended testing. They have been judged to be amongst some of the most ener gy efcient built in products on the market, with reduced carbon emissions and reduced running costs. New W orld Built-in Gas Users Guide[...]

contents & IntRoDUctIon CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALLA TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new cooker , from installation to use. Please rea[...]

Safety 5.1 BEFORE USING THE PRODUCT Make sure that you ha ve removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. GENERAL WARNING! - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be ke[...]

Safety 5.1 and performance, particularly in relation to surf ace temperatur es becoming hot and gas oper ated parts not working efciently . The cooling fan (if tted) is designed to run on after the control knob has been switched off . • Do not spr ay aerosols in the vicinity of this appliance while it is in oper ation. • Do not store or u[...]

Safety 5.1 or cover the o ven base with foil, as this can cause the base element to overheat. WARNING! - The top element gets extremely hot when in use, so take extr a care to avoid touching it. WARNING! - Do not modify the outer panels of this appliance in any w ay . WARNING! - This appliance must be earthed. WARNING! - There is a risk of electric[...]

Safety 5.1 stable and can lead to spillage or injury . • Always use the Minute Minder (if tted) if you are leaving the o ven unattended - this reduces the risk of food burning. Do Not • Never place items on the door while it is open. • Never wrap f oil around the oven shelves or allow foil to block the ue. • Never drape tea towels nea[...]

7 .000 USING THE GRILL - GAS (IF FITTED) Caution: Accessible parts may be hot when the grill is used - young children should be kept away. a grill pan handle can be purchased as an optional extra from our spar es department quoting the numbers below . Handle - 082283705 Handle grip - 082469100 Complete grillpan pack - 012635666 Contact details can [...]

USING THE GRILL - ELECTRIC (If fITTEd) 7 .130 Caution: Accessible parts may be hot when the grill is used - young children should be kept away. a grill pan handle can be purchased as an optional extra from our spar es department quoting the numbers below . Handle - 082283705 Handle grip - 082469100 Complete grillpan pack - 012635666 Contact details[...]

USING THE MAIN OVEN - GAS USING THE MAIN OVEN Ignition Push in and turn the main oven control knob to the ‘FULL ON’ position. Hold the control knob in, and press the ignition switch (if tted) or hold a lighted match or taper to the burner , until the burner lights. If after 15 seconds, the burner has not lit, turn off the oven and lea ve the[...]

USING THE MAIN OVEN - GAS For roasting joints of meat or poul try , and for pot roasts preheat the ov en to gas mark 6 and cook for 30 minutes, then adjust the oven control to the “S” slow setting for the remainder of the cooking time. Slow cooking times will be about three times as long as conventional cooking times. MAIN OVEN BAKING GUIDE Dis[...]

USING THE MAIN OVEN - GAS Traditional fruit cakes It should be remembered that ovens can vary ov er time, therefore cooking times can vary , making it difcult to be precise when baking fruit cakes. It is necessary therefore, to test the cake before remov al from the oven. Use a ne warmed skewer inserted into the centre of the cake. If the ske[...]

USING THE MAIN OVEN - GAS Roasting guide The times given in the roasting guide are only approximate, because the size and age of the bird will inuence cooking times as will the shape of a joint and the proportion of the bone. Frozen meat should be thoroughly thawed before cooking. F or large joints it is advis - able to thaw over night. Frozen p[...]

USING THE MINUTE MINDER (IF FITTED) ELECTRONIC MINUTE MINDER The digital timer enables you to set the time of day (24 hour clock) and the min- ute minder alarm. Setting the “Time of Day” • Switch on the electricity supply to the appliance. • Thedisplaywillash. • Press and release the time of day button. • Set the[...]

cleaning General • It is important to clean the product regularly as a build up of fat can af - fect its performance or damage it and may inv alidate your guar antee. • Always switch off y our appliance and allow it to cool down before you clean any part of it. • Do not use undiluted bleaches, products containing chlorides, wire wool or abras[...]

Cleaning REMOVING OVEN PARTS FOR CLEANING Inner Door Glass (glass doors only) • The inner door glass panel can be removed f or cleaning but it must be replaced the right way up . If there is any writing on the glass, you must be able to read it clearly when the cavity doors are open. • Always make sur e that the glass is pushed fully into the S[...]

installation Before you start: Please read the instruc - tions. Planning your installation will save you time and effort. Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible. The adjust- ment conditions are stated on the data badge. This applian[...]

INSTALLATION - 60CM STEP 1 : PREPARE INSTALLATION Do not lift the appliance by the door handle. Whilst every care is taken to elimi - nate burrs and raw edges f rom this product,please take care when handling - we recommend the use of protective gloves during installation. Please note that the weight of this appliance is approximately 31kg (unpacke[...]

INSTALLATION - 60CM i) When installed in a typical 600mm deep built in housing unit, the false back should be removed fr om the housing unit to provide the necessary depth for installation. ii) When the false back is remov ed, it is normally the case that the support shelf for the appliance leaves a gap between the back edge and the wall of approxi[...]

INSTALLATION - 70CM Before you start Please read the instructions carefully - planning your installation will save y ou time and effort. Look at the different w ays the appliance can be installed - as shown on the following pages - and plan the installation to suit your situation. Leave the appliance in the base tr ay packaging until you are ready [...]

INSTALLATION - 70CM METHOD 1: WITHOUT HOUSING UNIT(BETWEEN 2 BASE UNITS) Before installing the appliance, check the internal dimensions as shown. The space for the appliance must be clear of obstruction. Y ou may have to cut into or remove any r ear cross members to obtain the 550mm minimum depth. The Fixing Kit Should you need a replacement xin[...]

INSTALLATION - 70CM METHOD 2: HOUSING UNIT WITH internal height less than 710mm. Note: Y ou will not need the 2 side trims (687mm long) or the appliance runners for this installation. Y ou will need the 2 runners to x to the adjacent cabinets. Before you start; Before removing the bot tom shelf or modifying the housing unit, make sur e that it w[...]

INSTALLATION - 70CM METHOD 3: HOUSING UNIT WITH INTERNAL HEIGHT 710MM OR MORE Note: Y ou will not need the 4 runners and 2 trims that are packed with the oven f or this installation. 1. When installed in a typical 600mm deep built in housing unit, the false back should be removed fr om the housing unit to provide the necessary depth for installatio[...]

INSTALLATION - 90CM STEP 1 : PREPARE INSTALLATION Do not lift the appliance by the door handle. Remov e the xing screws from the polythene bag on the top of the appli- ance, but leave the appliance in the base tr ay packaging until you are ready to install it. Whilst every care is taken to eliminate burrs and raw edges f rom this appliance, plea[...]

INSTALLATION - 90CM Dimensions The appliance is designed to t into a standard 600mm wide housing unit, with minimum internal dimensions as shown. Note: All sizes are nominal, some v ariation is to be expected. Step 2 : Connect to gas supply 1. The inlet to the appliance is ISO 7 - Rp ½” internal thread situated towards the top right hand rear[...]

installation Make sure that the exible connector does not block the cooling fan inlet. 4. Flexible connections should comply with BS 669. Parts of the appliance lik ely to come into contact with a exible connector have a temperature rise of less than 70°C. 5. Rigid connections must be accessible to disconnect for servicing. Cut a 150mm squar[...]

installation For products without a plug This appliance must be connected by a competent person, using xed wiring via a double pole switched fused spur outlet, with a contact separation of 3mm at all poles. Use a 13 amp fuse. W e recommend that the appliance is connected by a qualied electrician, who will comply with the I.E.E. and local regu[...]

installation Step 4: Secure appliance into hous- ing unit Note : The unit housing the appliance must be appropriately xed. Ensure that the appliance is centrally located. T ake care not to damage the appliance or cabinetry . 70cm only Method 1 : Care must be taken to ensure the appliance runners are sufciently engaged over the top of the runn[...]

installation Anti-stain trim (if tted) The anti-stain trim is factory tted to the edges of the appliance front fr ame. This trim provides the cabinetry with extra protection fr om any escape of heat. - When Installing the product, ensure the anti-stain trim is correctly located on the edges of the front fr ame, before positioning and securing[...]

installation Commissioning Pressure test point Use the oven burner . From inside the oven remov e the burner cowl. Remo ve the small screw at the LHS of the burner cradle. Slide the burner to the left to ac- cess the injector . Connect suitable T -piece (incorporating a 115 injector) to the injector . Connect manometer to the T -piece, and turn ove[...]

TECHNICAL DATA Data badge Lower part of front fr ame and rear of appliance Gas category I 2H (20) Pressure setting G20 Natural Gas @ 20 mbar GAS DATA 60cm 70/90cm - Oven & Grill 70/90cm - Double Oven Appliance class Class 3, built-in ov en and grill Countries of destination GB - Great Britain, IE - Ireland Electrical supply 220 - 240V ~ 50Hz 26[...]

customer care FAQs What parts of the appliance can be washed in a dishwasher? • Any enamelled parts such as the grill pan can be cleaned in a dishwasher , as can oven shelves and shelf guides. What parts must NOT be cleaned in a dishwasher? • Parts such as burner skirts and caps, control knobs and any cast iron items must not be cleaned in a di[...]

CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensiv e range of accesso- ries, components and cleaning products which, will instantly give your cooker a good as new look. [...]

customer care 15.040 CUSTOMER CARE CHANGING LIGHT BULBS (where tted) Warning: There is a risk of electric shock, so alwa ys make sure you hav e turned off and unplugged y our appliance before starting. Always allow the product to cool down bef ore you change a bulb. Not all appliances have the same number and type of bulbs. Bef ore replacing you[...]

Please keep this handbook for f uture reference, or f or anyone else who may use the appliance.[...]

Please keep this handbook for f uture reference, or f or anyone else who may use the appliance.[...]

CUSTOMER CARE T o contact New W orld about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3747 in case of difculty within the UK Alternatively general, spar es and service information is av ailable from our website at www.newworldappliances.co.uk Please ensure that you h[...]