Nokia 1500S manuel d'utilisation

User Guide[...]

[...]

GB 3 Connecting a TV and a VCR Quick guide Preparing the Remote Control See pages 13 and 14 if you want to connect to an analogue satellite receiver or connect in any other way . •P lug in your Mediamaster . • The ”First time installation” menu is shown. •P r e ss the select button on the remote control to start the installation proce- du[...]

GB 4 Ti me adjustment The time is adjusted using the cursor up / cursor down buttons, ± half an hour at a time. Y ou can also change the minutes using the cursor left / cursor right buttons. •P r e ss select to finish the first-time installation and to open the Navi Bars. Channel search in progress This menu will be shown while the Mediamaster i[...]

GB 5 Contents Quick guide 3 Software end-user license 6 General information 8 Remote control 9 Front and rear panel 10 Installation of the Mediamaster 11 Preparing the remote control 11 Connecting the Mediamaster to the dish 11 General 11 Connecting to the TV 12 Connecting a TV and VCR 12 Connecting an analogue satellite receiver and a VCR 12 Nokia[...]

GB 6 Nokia Mediamaster software end-user license IMPORT ANT : READ CAREFULL Y BEFORE OR USING THE SOFTWARE NOKIA CORPORA TION, NOKIA HOME COMMUNICA TIONS END-USER SOFTWARE AGREEMENT This Software Agreement (“Agreement”) is between Y ou (either an individual or an entity), the End User , and Nokia Corporation, Nokia Home Communications (“Nokia[...]

GB 7 BUSINESS INFORMA TION, OR FOR ANY SPECIAL, DIRECT , INDIRECT , INCIDENT AL, ECONOMIC, COVER, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER ARISING UNDER CONTRACT , TORT , NEGLIGENCE, OR OTHER THEORY OF LIABILITY ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFT - W ARE, EVEN IF NOKIA OR ITS LICENSORS OR AF- FILIA[...]

GB 8 General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your Mediamaster , guiding you through installation, channel selection, viewing and many other functions[...]

GB 9 Remote control Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of standby mode. 0 - 9 Change the channel and select individual menu options. Note: If 0 is entered as the first digit, the TV Release func- tionality is activated (see below). 0 To toggle between the Mediamaster and[...]

GB 10 Front panel FRONT AND REAR P ANEL Function ON Standby Locked to channel Remote control feedback SW download Error LED indicator 1 Green Red - - Continous green flashing Continous red flashing LED indicator 2 - - Green (locked) / Red (not locked) Single flash Continous green flashing Continous red flashing to put the Mediamaster in and out of [...]

GB 11 Installation of the Mediamaster SCART socket SCART cable Owner’ s manual Remote control 8 mm 15 mm 3 mm F-connector Mains cable x The Mediamaster box should contain the following items: •t he Mediamaster •a remote control with 2 AAA batteries •a SCART cable (fully connected 1.0 metre) •a m ains cable •a n owner’ s manual with th[...]

GB 12 Nokia smart switch 1 2 SCART Connecting a TV and VCR Refer to your VCR’ s manual for full instructions. • Connect one SCART cable from the main SCAR T socket on the TV to the TV SCART socket on the Mediamaster . • Connect another SCART cable from the VCR to the AUX SCAR T socket on the Mediamaster . • Connect the RF cable from the RF [...]

GB 13 Connecting a HiFi system • Connect an RCA stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system. • If available, you can connect a single RCA cable from the DIGIT AL AUDIO socket on the Mediamaster to a HiFi system that is equipped with digital audio input. This outp[...]

GB 14 First time installation Language • Select the desired menu language using the cursor up / cursor down button. This will also become the main language for audio and subtitling. •P r e ss select to continue. General information Once you have correctly connected the Mediamaster , you will also have to perform a “First-time installation.”[...]

GB 15 One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •P r e ss opt to view the predefined channel. LNB type Select the correct LNB for your configuration. The most common values, includ- ing Universal LNB, can be selected using the cursor left / cursor right button. LNB offset voltage If [...]

GB 16 T ypical connection of a two-way DiSEqC switch: • Connect the cable from the LNB that is intended for channels from the ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the switch. • Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connec- tor marked LNB 2 (B). • Then, connect the antenna cable to the connec[...]

GB 17 Motor antenna configuration If you have an antenna motor to control your satellite antenna you must configure the following settings. •F rom the “Antenna/Satellite selection” menu select option 3 “Motor Antenna Configuration” and press select . T ype of motor • Select SA TSCAN (ASTRA) if you have a Nokia SatScan motor . •S elect[...]

GB 18 Channel search The Channel search procedure can be carried out in five different ways. The menu will look different depending on what option you selected in the “Antenna/satellite selection” menu. If you selected “One antenna/one LNB configuration”, select “Automatic”, “Manual” or “Advanced Manual” search, or “Use predef[...]

GB 19 Channel search in progress This menu will be shown while the Mediamaster is searching for TV and radio chan- nels. All channels that are found will be listed on the screen. Please note that the search procedure may take a few minutes. Y ou can cancel the search at any time by pressing select . When the search procedure has ended, a message wi[...]

GB 20 Navi Bars General information •P r e ss select to open the Navi Bars. The Navi Bars is used for selecting TV/Radio channels and changing system set- tings. The horizontal row contains folders , for example, Astra, Settings and so on. Their names are shown in black text at the bottom of each folder . Each folder contains bookmarks . The Cont[...]

GB 21 Visi ble Invisible Control folder ☛ User preferences Banner time-out When you switch channels, an information banner will be shown for a few sec- onds. Y ou can select the length of time that the banner will be shown. Vo lume bar Select whether or not you want the volume bar to appear on the screen when you change the volume. Vo lume bar ti[...]

GB 22 Important information about editing channels Before you start, you must select the list you want to edit. If you are watching TV and press select and then choose Edit channels, you can only edit TV channels. If you are listening to radio channels you can only edit radio channels. After selecting the satellite specific TV or radio, use the cur[...]

GB 23 Delete list If you want to delete a Favourite list, select the list using the cursor left / cursor right button and press select . Rename list Y ou can give an existing list a new name by following the instructions in the “ How to give a specific name ” section on page 19. Rearrange lists If you have created several Favourite lists, you c[...]

GB 24 Control folder ☛ Edit satellites Y ou can add a new satellite to the system. Y ou can also edit or delete existing sat- ellites. To add a new satellite • Select “Add Satellite”. • Enter the name of the new satellite. (Entering a name is described on page 23.) • Enter the orbital position (in degrees) using the numeric buttons. •[...]

GB 25 •Y ou can adjust the dish using channel preview if PID information has been en- tered. •P r e ss select to start the channel search. •W hen you get the message on the screen that ”you have found X new TV -chan- nels and X new radio channels”, press select to save the new channels. The new channels will be saved and added to the TV a[...]

GB 26 Control folder ☛ System info If you need to contact your service provider or a service centre, they may ask for information that is available from this menu. This gives general information about the hardware and software version on which your Mediamaster is running. Ti mer set-up •F irst, select Channel List using the cursor left / cursor[...]

GB 27 Settings folder ☛ T V To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory . Y ou can adjust the audio/video settings for your receiver . •P ress opt to view the TV picture on the screen. TV screen format Select your TV screen format. The 4:3 format is the standard format for most T[...]

GB 28 Navi Bars Settings folder ☛ T im e To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory . The time is adjusted using the cursor up / cursor down button, half an hour at a time. Y ou can also adjust the minutes using the cursor left / cursor right button. Settings folder ☛ Access To [...]

GB 29 Settings folder ☛ Reinstall To open this menu you will be asked to enter your access code. The access code is set to 1234 at the factory . Use this option only if you have to start the complete installation procedure from scratch. If you continue, all your previous settings, access code, favourite chan- nels, etc, will be erased! If you do [...]

GB 30 V iewing Mode General information The following describes the basic functions of your Mediamaster that can be used while watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme in- formation. Please [...]

GB 31 Extended programme information The Mediamaster can display information about programmes that are currently be- ing broadcasted as well as those that will be broadcast next. This procedure is the same for both TV and radio mode. By pressing info while watching TV the “Programme information” banner will appear . Press info again to display [...]

GB 32 External equipment Use the 0 (zero) button to toggle between the Mediamaster and any external equipment connected to the AUX Scart, e.g. a video recorder or a satellite receiver . T eletext Pressing txt will open a teletext page (if teletext is transmitted on that channel.) Select teletext pages using the numeric buttons on the remote control[...]

GB 33 Glossary of terms AC-3 A multichannel digital audio encoding system. Access control A feature that allows parents to ”lock” programmes that they consider to be unsuitable for children. A ”locked” channel or programme can only be ”unlocked” using the special access code. Access code A four -digit code stored in the Mediamaster . It[...]

GB 34 Tr oubleshooting Problem The LED on the front panel does not light up/is not lit. The left-hand LED is red No sound or picture. No sound or picture on the horizon- tal modulated transponder . Bad picture/blocking error . There is no Welcome menu on the screen after you have switched the Mediamaster on for the first time. Y ou made a video r e[...]

GB 35 T ransmission standards DVB, MPEG 2 LNB / T uner input Connector 1x F-type (LNB) RF input frequency 950-2150 MHz RF input power level -20 to -65 dBm Supply voltage 13 /18 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0.65 V pp DiSEqC T one burst A/B or Level 1.2 RF impedance 75 Ω TV SCART Vi deo output 1 V pp ( ± [...]

GB 36 Motor antenna Antenna/satellite Antenna User pref User preferenses Switch/antenna Channel search Channel Edit channels Edit channels TV settings TV Timer Timer list Timer setup Advanced manual search Access control Access ctrl System info System information Manual search Time adjustment Time Reinstall Banner T ime-out Vo lu me bar Vo lume bar[...]

[...]

Nokia is a registered trademark of Nokia Corporation www .nokia.com 00000935.00[...]