NordicTrack NTL24820 manuel d'utilisation

USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL24820 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Visit our website at www .nordictrack.co[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that bl[...]

22. When using iFIT.com CD’s and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in- cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the chang[...]

Thank you for selecting the revolutionary NordicTrack ® E 4400 treadmill. The E 4400 treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in the conve- nience of yo ur ho me. And when you’re not exercising, the unique E 4400 treadmill can be folded up, requiring less than half the fl[...]

ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver , wire cutters , and rubber mallet . Note: The underside of the treadmill walking belt is coa[...]

7 5. Insert two Handrail Bolts (78) with Handrail Washers (77) into the right Upright (69) and the right Handrail (66). Be careful not to damage the Upright Wire Harness (not shown). Next, lift the right Handrail (66) slightly and align the Bolts with the holes in the Handrail. Thread the Bolts into the Handrail. Do not tighten the Bolts yet. Attac[...]

OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW T[...]

9 FEATURES OF THE CONSOLE The advanced console offers a selection of features designed to help you get the most from your exercise. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even me[...]

10 GETTING STARTED Attach the clip to the waistband of your clothes. Stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Next, in- sert the key into the console. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key i[...]

11 HOW TO USE THE MANUAL MODE Insert the key fully into the console. See GETTING STARTED on page 10. Select the manual mode. When the key is inserted, the manual mode will automatically be selected. If a program has been selected, press the Select Goal button repeatedly until the words “MANUAL MODE” appear in the main display. Press the Start b[...]

12 Distance/Laps —The center section of the main display shows the distance that you have walked and the number of 1/4-mile laps you have completed. The display will change from one number to the other every few seconds; the Laps indicator will light when the number of laps is shown. Calories/Pulse — When you are not using the handgrip pulse se[...]

13 HOW TO USE PRESET PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select the desired preset program. The console offers sixteen preset programs— four programs that focus on weight loss, seven pro- grams designed for aerobic exercise, and five pro- grams for high-performance conditioning. When the key is inserted[...]

14 If the speed or incline setting is too high or too low during the program, you can manually override the setting by pressing the Speed or Incline but- tons on the console. Every few times one of the Speed buttons is pressed, an additional indicator will light or darken in the Current Segment column. (If any of the columns to the right of the Cur[...]

15 HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal button repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- play. Next, pres[...]

16 HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal button repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- play. N ext, press [...]

17 HOW TO USE HEART RATE PROGRAMS Heart rate programs automatically adjust the speed and incline of the treadmill to keep your heart rate near a target level while you exercise. Note: You must wear the optional chest pulse sensor (see page 24) to use the heart rate programs. Follow the steps below to use a heart rate program. Put on the optional ch[...]

18 Press the Start button or the Speed + button to start the program. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking. Each heart rate program is divided into several time segments of different lengths. ( The main display sho[...]

19 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFit.com CD’s , the treadmill must be connected to your portable CD player, portable stereo, home stereo, or computer with CD player. See this page and page 20 for connecting instructions. To use iFIT.com videocassettes , the treadmill must be connected to your VCR. See pa[...]

20 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the [...]

21 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20. A. Plug one end of the audio cable into the[...]

22 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the St[...]

23 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details. To use programs from our Web site, the treadmill must be connected to your home computer. See HO[...]

24 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the informati[...]

25 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- come damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1.[...]

26 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the treadmill down until the frame is past the lock pin. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. CAUTION: To decrease the poss[...]

27 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The powe[...]

28 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench,[...]

29 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

P ART LIST—Model No. NTL24820 R0103A To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail Insert 2 1 Left Foot Rail 3 2 2” Hood Screw 4 1 Front Left Endcap 5 2 Frame Pivot Bolt 6 2 Frame Pivot Spacer 7 1 Magnet 8 1 Front Roller/Pull[...]

Key No. Qty. Description Key No. Qty. Description 103 2 Extension Cap 104 2 Incline Warning Decal 105 1 Idler Arm Bolt 106* 1 Extension Leg Assembly 107 2 Fan 108 1 Book Holder 109 1 Power Cord Grommet 110 1 Frame 111* 1 Idler Arm Assembly 112 2 Roller Star Washer 113 2 Spring Plate 114* 2 Cushion Assembly 115 1 Left Cup Holder 116 1 Right Cup Hold[...]

45 46 11 3 11 3 128 128 27 57 27 64 144 27 27 27 2 1 4 5 6 7 8 20 10 27 12 13 9 21 64 32 20 6 5 37 36 9 24 38 33 40 131 42 41 33 100 100 3 145 51 1 53 52 14 60 61 54 11 0 54 62 109 63 100 3 31 39 53 75 96 34 59 19 11 2 58 100 1 14* 124 121 122 123 120 122 121 11 7 26 26 120 125 30 55 56 50 44 49 67 44 50 49 56 67 11 9 26 11 8 55 125 129 125 129 45 [...]

85 86 99 100 103 102 89 100 91 92 94 93 99 100 147 104 99 100 97 98 104 9 94 93 23 147 68 66 87 76 76 90 87 69 84 87 87 11 11 80* 77 78 81 40 107 65 107 130 90 90 33 33 90 90 33 90 33 90 90 11 90 90 90 90 90 90 90 90 77 78 11 6 90 90 11 5 88 90 99 100 103 102 106* 106* 70 71 74 73 72 95 101 79 79 83 83 82 108 100 100 95 9 101 142 EXPLODED DRA WING?[...]

Part No. 193008 R0103A Printed in USA © 2003 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack ® E 4400 treadmill (“Product”) is warranted to be free of all defects in ma- terial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original pur[...]