Français dropdown-ico

OmniTek 839-1340 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation OmniTek 839-1340. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel OmniTek 839-1340 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation OmniTek 839-1340 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation OmniTek 839-1340 devrait contenir:
- informations sur les caractéristiques techniques du dispositif OmniTek 839-1340
- nom du fabricant et année de fabrication OmniTek 839-1340
- instructions d'utilisation, de réglage et d’entretien de l'équipement OmniTek 839-1340
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage OmniTek 839-1340 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles OmniTek 839-1340 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service OmniTek en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées OmniTek 839-1340, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif OmniTek 839-1340, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation OmniTek 839-1340. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Quartet Front Solitaire Front TO P A Z DIRECT VENT ROOM HEA TER Owner ’ s Manual Installation and Operation Model: 839-1290 839-1320 839-1340 TOP AZ-D-CSB R O-T O - T L T ested and Listed by Portland Oregon USA OMNI-T est Laboratories, Inc. C US DO NOT DISCARD THIS MANUAL CAUTION • Important operating and maintenance instructions included. • [...]

  • Page 2

    2 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 and Welcome to the Quadra-Fire Family ! Hearth & Home T echnologies welcomes you to our tradition of excellence! In choosing a Quadra-Fire appliance, you have our assurance of commitment to quality , durability , and performance. This commitment begins with our research of the market, in[...]

  • Page 3

    3 - T ABLE OF CONTENTS - Section 1: Listing and Code Approvals A. Appliance Certi fi cations ...................... 4 B. Glass Speci fi cations ............................ 4 C. BTU Speci fi cations .............................. 4 D. High Altitude Installations .................... 4 E. Non-Combustible Materials ................. 4 F. Combustib[...]

  • Page 4

    4 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 1 Listing and Code Approvals The product is listed to ANSI standards for “V ented Gas Appliance Heaters” and applicable sections of “Gas Burning Heating Appliances for Manufactured Homes and Recre- ational V ehicles” and "Gas Fired Appliances for use at High Altitudes". A. [...]

  • Page 5

    5 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 NOTE: The following requirements reference various Massachusetts and national codes not contained in this document. For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those[...]

  • Page 6

    6 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 2 Getting Started Check building codes prior to installation. • Installation MUST comply with local, regional, state and national codes and regulations. • Consult local building, fi re of fi cials or authorities having jurisdiction about restrictions, installation inspection, and permi[...]

  • Page 7

    7 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 3 Appliance Location and Clearances A. Selecting Appliance Location NOTE: · Illustrations re fl ect typical installations and are FOR DESIGN PURPOSES ONL Y . · Illustrations/diagrams are not drawn to scale. · Actual installation may vary due to individual design preference. When selectin[...]

  • Page 8

    8 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 4 T ermination Locations A. V ent T ermination Minimum Clearances Figure 4.2 Multiple V ertical T ermination Figure 4.1 T ermination Clearances Figure 4.3 speci fi es minimum vent heights for various pitched roofs. Figure 4.3 Minimum Height from Roof to Lowest Discharge Fire Risk. Explosion[...]

  • Page 9

    9 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Figure 4.4 V = VENT TERMINAL X = AIR SUPPL Y INLET = AREA WHERE TERMINAL IS NOT PERMITTED A = 12 inche s ............. clearances above grade, veran- da, porch, deck or balcony B = 12 i n ch es ............ c l ea r an c es t o w in d ow o r d o or that may be opened, or to per- manently clo[...]

  • Page 10

    10 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 5 V ent Information A. V enting Components B. Use of Elbows In order to comply with applicable codes and product warranties, use only following venting components: • Hearth & Home T echnologies (HHT) • Simpson Dura-V ent • Selkirk Direct-T emp • Amerivent Direct • Security Sec[...]

  • Page 11

    11 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 D. How to Use the V ent Graph E. V enting Guidelines 1. Measure the vertical distance from the center line of the flue pipe to the center of the 90° elbow . On the graph below , draw a horizontal line from that measurement on the vertical axis across until it intersects with the slanted li[...]

  • Page 12

    12 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Female Locking Lugs Male Locking Lugs Step 1. Determine the desired location of the appliance. Check to ensure that wall studs or roof rafters are not in the way when the venting system is attached. If this is the case, you may want to adjust the location of the appliance. F . Horizontal T [...]

  • Page 13

    13 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Figure 5.5 When installing in a rear vent configuration with no vertical rise: a Snorkel Kit must be used, and a derating orifice must be installed. The appropriate orifice is supplied with the Rear V ent Kit . 45° Elbow in Corner Installation Center Line Wall Thimble Center Line Center of[...]

  • Page 14

    14 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Step 5. Place the wall thimble cover over the pipe assembly and slide the appliance and vent assembly towards the wall, carefully inserting the vent pipe into the vent termination cap assembly . It is important that the vent pipe extend into the vent termination cap a sufficient distance so[...]

  • Page 15

    15 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Step 1. Check the installation instructions for required 1 in. (25mm) clearances (air space) to combustibles when passing through ceilings, walls, roofs, enclosures, attic rafters, or other nearby combustible surfaces. See page 16, Figure 5.16. Check the instructions below for maximum verti[...]

  • Page 16

    16 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Step 4. Assemble the desired lengths of pipe and elbows necessary to reach from the appliance up through the round support box. Ensure that all pipe and elbow connections are in their fully twist-locked position. Assemble as instructed. Step 5. Cut a hole in the roof centered on the small d[...]

  • Page 17

    17 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Ceiling Firestop Nails Minimum 1 in. (25mm) Clearance Minimum 1 in. (25mm) Clearance Minimum 1 in. (25mm) Clearance Minimum 1 in. (25mm) Clearance Figure 5.16 Fire Risk. Explosion Risk. W ARNING • Any occupied areas above the first floor , including closets and storage spaces, which the v[...]

  • Page 18

    18 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 2. Cathedral Ceiling Level Cathedral Ceiling Support Box 2 in. (51mm) Min. below finished ceiling Cut hole 1/8 in. (3mm) greater in size than pattern of support box as it is projected onto roof line Figure 5.17 Figure 5.18 Step 1. Follow installation Steps 1 and 2 under vertical installatio[...]

  • Page 19

    19 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 3. Class A Metal Chimney Figure 5.20 High Wind T ermination Cap Sheet Metal Screws Drill Four 1/8 in. (3mm) Diamater Holes Figure 5.22 Figure 5.23 Step 4. Pass the flex pipe down through the center of the chimney system, and center the top adapter on the top of the chimney pipe. Drill four [...]

  • Page 20

    20 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 4. Existing Masonry Chimney T ype A - Up & Out Installations for T op V ent Configurations Figure 5.24 T ype B - Hearth Rear V ent Installations for Use With Rear V ent Kit (see Section 12 for conversion kit and venting components.) Chimney Liner T ermination Cap Co-Axial to Co-Linear C[...]

  • Page 21

    21 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 10 in. x 10 in. (254mm x 254mm) framed opening in wall Studwall Masonry Chimney Retro Connector (4) Masonry Bolts (Not Included) Wall Thimble Cover Cut and bend flashing as needed to fit Sealant adhesive Figure 5.25 Figure 5.26 Step 1. Before cutting any holes, assemble the desired sections[...]

  • Page 22

    22 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 High Wind T ermination Cap T op Adaptor (3) Sheet Metal Screws Flashing Step 9. Attach the flex to the retro connector. Use three sheet metal screws to attach the flex liner to the connector ( Figure 5.29 ). Mount the retro connector to the masonry wall using masonry bolts. Redrill larger h[...]

  • Page 23

    23 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 6 Gas Information A. Fuel Conversions Before making gas connections ensure that the appliance being installed is compatible with the available gas type. Any natural or propane gas conversions necessary to meet the appliance and locality needs must be made by a quali- fi ed technician using[...]

  • Page 24

    24 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 A B C Mounting Screws Pressure Regulator T ower Diaphragm Figure 6.8 T urn control knob to the OFF position, ensure that gas supply to the valve has been turned off. Using a T orx TH20, or slotted screwdriver , remove the three pressure reg- ulator mounting screws (A) , pressure regulator t[...]

  • Page 25

    25 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Fire Risk. Explosion Risk. • If the information in these instructions is not followed exactly , a fi re, explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. • The quali fi ed service agency is responsible for the proper insta[...]

  • Page 26

    26 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 • A small amount of air will be in the gas supply lines. When fi rst lighting appliance it will take a short time for air to purge from lines. When purging is complete the appliance will light and operate normally . Air only needs to be purged again if gas valve has been turned to the OF[...]

  • Page 27

    27 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 7 Electrical Information A. Recommendation for Wire C. Standing Pilot Ignition System Wiring See B5 below for recommended maximum lead length (two wire) when using wall thermostat/switch. B. Connecting to the Appliance This appliance DOES NOT require 1 10 V AC supply for operation. A wiring[...]

  • Page 28

    28 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Figure 7.1 CAUTION Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. V erify proper operation after servicing. Shock hazard. • Replace damaged wire with type 105 O C rated wire. • Wire must have high temperature ins[...]

  • Page 29

    29 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 8 Appliance Setup A. Remove Shipping Materials Remove shipping materials from inside or underneath the fi rebox. B. T op to Rear V ent Conversion Figure 8.1 Remove top trivet, if installed. Remove vent pipe adapter and gasket. If gasket breaks, apply high-temperature silicone to the bottom[...]

  • Page 30

    30 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 D. Accessories Install approved accessories per instructions included with accessories. Refer to Section 12 for appropriate accesso- ries. Shock or fi re risk. Use ONL Y optional accessories approved for this appliance. • Using non-listed accessories voids warranty . • Using non-listed[...]

  • Page 31

    31 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 E. Front Installation Fronts shipped attached to face Figure 8.12 T o remove the face, loosen the thumb bolt beneath the ashlip. Figure 8.13 Lift up on the top of the Front, gently pulling out on the bottom. Set aside in a safe location. For BOTH Quartet and Solitaire Fronts: INST ALLA TION[...]

  • Page 32

    32 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 NOTE: Side brick panels will fit only if installed at an angle. Do not attempt to push the brick flat against the outer wall of the firebox. Brick should rest against spacer on inside of firebox. Figure 8.16 Install left or right side panel. Place in lower chan- nel and rotate into place. F[...]

  • Page 33

    33 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Figure 8.20 Insert locator pin into right front log. Insert rear log onto log pan over stud. Figure 8.22 Insert locator pin into right front log. Place right front log on burner in the grooves provided on the burner surface. Locater Pins Figure 8.23 Place right twig over the locator pins on[...]

  • Page 34

    34 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 NOTE: This blower utilizes a snap disc to control ON and OFF operation. When the correct temperature is reached, the blower will automatically turn ON. Use the rheostat knob to adjust the fan to High or Low to suit your preferences. Figure 8.29 Install speed control to switch panel. Attach [...]

  • Page 35

    35 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Figure 8.31 Blower Wiring Diagram Fan Speed Control Thermal Disc (1 10 V AC) Power Cord BLACK Bushing Strain Relief GREEN BLACK Ground Fan Assembly BLACK BLACK WHITE WHITE WHITE[...]

  • Page 36

    36 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 See Vent Graph for Recommendations on page 1 1 before you begin your adjustment. If your installation falls within the range of the gray shaded area of graph, it may be necessary to make an adjustment to the vertical damper to improve the flame appearance in your appliance. Figure 8.34 The [...]

  • Page 37

    37 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 9 Operating Instructions A. Before Lighting Appliance Read this entire manual prior to using the appliance. Failure to follow the instructions may result in property damage, bodily injury, or even death. Glass door must be in place when appliance is operating. Risk of: • Combustion Fumes [...]

  • Page 38

    38 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 C. Lighting Appliance 1. Set the thermostat to lowest setting. 2. T urn off all electric power to the appliance if service is to be performed. 3. Push in gas control knob slightly and turn clockwise to "OFF" position. FOR YOUR SAFETY READ BEFORE LIGHTING FOR YOUR SAFETY READ BEFOR[...]

  • Page 39

    39 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 D. After Appliance is Lit When you light your appliance, you may notice that it pro- duces heat which does have an associated odor or smell. If you feel this odor is excessive it may require the initial three to four hour continuous burn on high followed by a second burn up to 12 hours to f[...]

  • Page 40

    40 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 10 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service person in the diagnosis of a problem and the corrective actio[...]

  • Page 41

    41 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Symptom Possible Cause Corrective Action 3. (Continued) c. Defective valve. T urn the valve knob to the ON position. Place the ON/OFF switch in the ON position. Check the millivolt meter at the thermopile terminals. The millivolt meter should read greater than 125mV . If the reading is acce[...]

  • Page 42

    42 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 11 Maintaining and Servicing Y our Appliance Although the frequency of your appliance servicing and maintenance will depend on use and the type of installation, a quali fi ed service technician should perform an appliance check-up at the beginning of each heating season. Risk of injury or [...]

  • Page 43

    43 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 Inspect Maintenance T asks Doors 1. Inspect for scratches, dents or other damage and repair as necessary . 2. V erify no obstructions to air fl ow . 3. V erify maintenance of proper clearance to combustible household objects. Gasket Seal, Glass Assembly and Glass 1. Inspect gasket seal and[...]

  • Page 44

    44 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 12 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only . For clearances refer to Section 3. Figure 12.1 Appliance Dimensions B C A K L M N O D E F G H I J Location Inches Millimeter Location Inches Millimeter A 27-3/8 695 I 1[...]

  • Page 45

    45 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 B. V ent Components Diagram Figure 12.2 SL-D Series V ent Components 4 in. (102 mm) inner pipe 6-5/8 in. (168 mm) outer pipe 9-1/4 in. (235mm) 6-1/2 in. (165mm) 6-5/8 in. (168mm) 17-24 in. (432-610mm) 1 1-3/4 in. (298mm) 5-3/4 in. (146mm) 6-5/8 in. (168mm) 6-3/8 in. (162mm) 6-1/2 in. (165mm[...]

  • Page 46

    46 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 C. V ent Components List Description HHT SLP M= Multi Pack (6) Simpson Dura-V ent DirectV ent Pro 4” Pipe Length, Galvanized SLP4M - 4” Pipe Length, Black SLP4-BK - 6” Pipe Length, Galvanized SLP6M 46-DV A-06 6” Pipe Length, Black SLP6-BK 46-DV A-06B 9” Pipe Length, Galvanized - 4[...]

  • Page 47

    47 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 C. V ent Components List (continued) * Stove Adaptor Kit (V ertical Cap Kit) Includes 30’-4” À ex, adapters, wall thimble, masonry , ZC À ashing, 991DA vertical cap. NOTES: 1 Before cutting any holes check pipe manufacturers current instructions. 2 Each pipe manufacturer has their own[...]

  • Page 48

    48 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 D. Service Parts List R TOP A Z Direct V ent Gas Stove Part number list on following page. Log Set Assembly 1 2 3 4 5 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 7 8 6 Color SKU No. Mfg. Dates Solitaire Matte Black 839-1340 4/02-Active Solitiare Porcelian Creme 839-1350 5/[...]

  • Page 49

    49 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 TOP A Z IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBE[...]

  • Page 50

    50 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 TOP A Z D. Service Parts List IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTIO[...]

  • Page 51

    51 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 TOP A Z D. Service Parts List IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTIO[...]

  • Page 52

    52 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 TOP A Z IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBE[...]

  • Page 53

    53 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBER ACCESS[...]

  • Page 54

    54 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 E. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth a[...]

  • Page 55

    55 Quadra-Fire • T opaz • 7009-1 13 Rev . J • 12/1 1 E. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU  $ OLVWRI ++7DXWKRUL]HGGHDOH[...]

  • Page 56

    56 DEALERSHIP WHERE PURCHASED: ______________________________________ ______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ DEALER TELEPHONE: __________________ __________________ Y our Records for Model: [...]