Oricom SLIM-9000 manuel d'utilisation

USER MANUAL Keep this user guide for future reference. Slim-9000 Digital Cordless Telephone with Answering System TM[...]

TM[...]

1 Contents Contents Getting started 4 Important 4 Location 5 Handset range 5 Signal strength 5 Installation and Charger 5 Battery low warning 5 Battery performance 6 Pack contents 7 Purchasing additional handsets 7 Getting to know your phone 8 Handset Overview 8 Base Station Overview 10 Handset LCD Display 11 Using the phone 12 Power on the Handset[...]

2 Contents Store a Call List Number into the Phonebook 19 Dial a Call List Number 19 Delete an Entry in the Call List 20 Delete the Entire Call List 20 Clock & Alarm 21 Date & T ime 21 Change date format 21 Change time format 21 Set the date 21 Set the time 21 Alarm 22 T urn off the alarm 22 Set and turn on the alarm 22 Set the alarm melody[...]

3 Contents Set the Outgoing Message Language (Country Dependent) 30 Record Y our Own Outgoing Message (OGM) 30 Playback the Outgoing Message (OGM) 31 Set the Answer Delay 31 Set the Recording T ime of Incoming Message 31 Activate Remote Access 31 Call Screening 33 DEF AUL T SETTINGS 34 Appendix 35 T roubleshooting 35 Warranty Information (Australia[...]

4 GettinG st ar ted Important • Avoidexposureofthistelephonetomoistureorliquid. • T o pre ve nt el ec tri c sh ock , do no to pe n the h an dse t or ba se ca bi ne t. • Avoidmetalliccontact(e.g. metalclips, keys)betweenthe battery contacts and chargin[...]

5 GettinG st ar ted Location Y ou need to place your Slim base within 2 metres of the mains power socket and telephone socket so that the cables will reach. Mak e s ur e it is at l eas t 1 met re aw ay fr om o the r el ect ri cal a ppl ia nc es to av oid i nt erf er en ce. Y ou r u ni t wor ks b y s en di ng ra di o s ig nal s be twe en th e h an d[...]

6 GettinG st ar ted Batter y performance In ideal conditions, fully charged batteries should give about 10 hours talk time or 100 hours standby time on a single charge. Note that new batteries do not reach full capacity until they ha ve been in normal use for several days. The charge capacity of rechargeable batteries will reduce with time as they [...]

7 GettinG st ar ted P ack contents Depending on the model you have purchased this pack should contain the following items: If any of these are missing, please contact Oricom directly . Base units 1 Cordless handsets 2 Charging cradle and power adaptor 2 Power adaptors 1 Line cord 1 User guide 1 Handset Rechargeable Ni-MH Battery Pack 2.4V 500mAh 1 [...]

8 GettinG to know your phone 1 3 2 4 1 7 8 9 10 12 5 6 11 3 Handset Overview[...]

9 1 EARPIECE 2 UP In menu mode: Press to scroll up the menu list In Phonebook list / Redial list / Call List: Press to scroll up the list During a call: Press to increase the volume 3 LEFT SOFT KEY In idle mode: Press to access the main menu In sub-menu mode: Press to select the option During a call: Press to mute/unmute the microphone During call [...]

10 10 DOWN / REDIAL LIST In idle mode: Press to access the redial list In menu mode: Press to scroll down the menu list In Phonebook list / Redial list / Call List: Press to scroll down the list During a call: Press to decrease the volume 11 INTERCOM In idle mode: Press to make internal call During an external call connection: Long press to initiat[...]

11 GettinG to know your phone Handset LCD Display Following icons will be displayed according to the current status of the phone operation. Icons Description Steady when the handset is in range of the base. More bars will show when the signal strength is strong. Flashes when the handset is searching for , or is out of range of the base. Indicates t[...]

12 usinG the phone Using the phone Power on the Handset If your handset is powered off before, press and hold <T ALK OFF> to turn on the handset. Y ou can press and hold <TALK OFF> again to power off the handset. Make an External Call Preparatory dialling Enter the phone number and press <T ALK ON> or <SPEAKERPHONE> to dial [...]

13 usinG the phone End a Call During a call , press <T ALK OFF> to end the call. OR Put the handset on the base station or charger pod to end the call. Adjust Earpiece and Handsfree Volume 5 volume levels (Level 1 to Level 5) can be set for each of earpiece and handsfree volume. During a call: Press <UP> or <DOWN> to increase or d[...]

14 usinG the phone Delete a redial number 1. Follow steps 1 and 2 section “Save a redial number into the phonebook”. 2. Press <Menu> and <UP/DOWN> to scroll to Delete . 3. Press <SELECT> and then <OK> to conrm the Delete. Delete the entire r edial list 1. Follow steps 1 and 2 section “Save a redial number into the p[...]

15 usinG the phone T ransfer an external call to another handset During a call: 1. Follow steps 1 to 3 in section “Intercom another handset”. 2. The external call is put on hold automatically and the called handset rings. 3. Press <T ALK ON> / <SPEAKERPHONE> / <Accept> on the called handset to establish an internal call. 4. Pr[...]

16 phonebook Phonebook Y our phone can store up to 100 private phonebook entries with names and numbers. Each phonebook entry can ha ve a maximum of 24 digits for the phone number and 12 characters for the name. Add a New Entry In idle mode: 1. Press <Menu> and <UP/DOWN> to scroll to Phonebook. 2. Press <Select> to access the phon[...]

17 phonebook OR 1. Press <Menu> and <UP/DOWN> to scroll to Phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> and <Select> to select View . 4. Press <UP/DOWN> to highlight your desired phonebook entry . 5. Press <Select> to view the details ofthe selected phonebook entry . Delete [...]

18 phonebook 5. The receiving handset will beep and prompt to ask whether to accept the phonebook transfer from the sending handset. 6. Press <OK> to start the phonebook transferring process. 7. When the transfer is completed, “ Finished ” will be displayed on both sending and receiving handsets. Note If<Back>ispressedin[...]

19 Caller LIST This feature is available if you have subscribed to the Caller ID service with your network ser vice provider . Y our phone can store up to 30 answered calls or unanswered with date/time informa tion in the call list. The number will be shown on the display when the phone is ringing. If the number matches with one of the entries in y[...]

20 Delete an Entry in the Call List 1. Follow steps 1 to 3 in Section “View the Call List”. 2. Press <Menu> and <UP/DOWN> to scroll to Delete . 3. Press <Select> to conrm. 4. Press <OK> to reconrm. Delete the Entire Call List 1. Follow steps 1 to 3 in Section “View the Call List”. 2. Press <Menu> and <[...]

21 Clock & Alarm Y ou can set date and time to be displayed in different forma ts, and set an alarm time. Date & Time Change date format In Idle: 1. Press <Menu> and <UP/DOWN> to scroll to Clock/Alarm . 2. Press <Select> and <UP/DOWN> to scroll to Date & Time . 3. Press <Select> and <UP/DOWN> to scrol[...]

22 Alarm Y ou can use the handset as an alarm clock. When an alarm is set, the <ALARM Icon> is shown on the handset display . When the alarm time is reached, the <ALARM icon> and “ Alarm On ” ash on the display , and the alarm melody is played for 45 seconds or until a any handset key is pressed. Ifsnoozefunctionisact[...]

23 Settings Y our phone comes with a selection of settings that you can change to personalise your phone operation. Handset Settings Set the internal ringer melody In Idle mode: 1. Press <MENU> and <UP/DOWN> to sc roll to HS Settings . 2. Press <Select> and <UP/DOWN> to scroll to Ring Setup . 3. Press <Select> and <[...]

24 4. Press <Select> and <UP/DOWN> to scroll to On or Off. 5. Press <Select> to conrm your alert tone setting. Rename the handset 1. Press <Menu> and <UP/DOWN> to scroll to HS Settings . 2. Press <Select> and <UP/DOWN> to scroll to Rename HS . 3. Press <Select> and then enter your new name for the [...]

25 5. Press <Select> and enter the number for the selected Bar Number . Note Each barring number can include up to 4 digits including “*” and “#”. Press <Clear> to delete a digit or press and hold <Clear> to delete the whole barring number . 6. Press <OK> to conrm the number to be barred. Note If Barring Mode is s[...]

26 3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000) 4. Press <OK> to conrm the PIN. 5. Press <OK> to conrm the handset default. Note IfthePINcodeisenteredcorrectlyandisconrmedtorestoretheHSsettings to default settings, “ Reset ” will dis[...]

27 5. Press <OK> and enter your new 4-digit system PIN. 6. Press <OK> and enter your new 4-digit system PIN again. Note If the ne w PIN enter ed in Step 6 is not matc hed with th e new syste m PIN entered in Step 5, “New PIN Invalid” is displayed and you are returned to step 5. 7. Press <OK> to conrm the new PIN. Reset base[...]

28 ANSWERING MACHINE Y our phone includes a telephone answering machine(T AM) that records unanswered calls when it is on. The ans wering machine can store up to 59 messages within a maximum recording time of approximately 15 minutes. As well as recording incoming messages, you can record memos for other users of your phone. If the answering machin[...]

29 answerinG maChine 5. Press <Option> and <UP/DOWN> to scroll to Stop , Next , Previous or Delete . 6. Press <Select> to perform the following functions during message playback. Stop : Stop the current messa ge playback and return to the Answer Machine menu. Next : Skip to play the next message. The da te and time information of [...]

30 Answering Machine Settings Y ou can use the TAM Settings menu through the handset to change the settings of your answering machine. Set the Answer Mode By default, the answer machine is set in Answer & Record mode which allows callers to leave a message. This mode can be changed to Answer Only which does not allow callers to leave a message.[...]

31 Playback the Outgoing Message (OGM) Y ou can playback your own personalised OGM or the pre-set OGM for Answer & Record mode or Answer Only mode. Playback the OGM 1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine . 2. Press <Select> and <UP/DOWN> to scroll to T AM Settings . 3. Press <Select> and <UP/D[...]

32 Change the 4-Digit Remote Access PIN 1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine . 2. Press <Select> and <UP/DOWN> to scroll to T AM Settings . 3. Press <OK> and <UP/DOWN> to scroll to Chg Remote PIN . 4. Press <Select> to enter the Old remote access PIN (Default Remote Access PIN is 0000).[...]

33 Keys Functions While message is not playing While message is playing 2 Delete the current message playback 4 Repeat playing the current message from the beginning. Press twice to skip backward to play the previous message. 5 Play the message Stop the current message playback 6 Skip to play the next message 7 T urn on the ans wering machine Stop [...]

34 deF aul t settinGs Items Default Values External Ring Melody 6 Internal Ring Melody 1 Handset Ring V olume Volume 4 Earpiece V olume Volume 3 Speaker V olume Volume 4 Handset Name Oricom Key T one On Battery T one On Out of Range On Ringer on/Off On Con trast (Level 1 to 5) Level 3 Keypad Locked Off Auto Answer Off Date Format DD-MM-YYYY Time Fo[...]

35 T roubleshooting Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected. 2. T oo far from the base unit. 3. Battery charge is lo w . 4. Incorrect battery polarity. 5. Re-register handset. 1. Check CONNECTION to power and telephone line. 2. Move handset CLOSER to base unit. 3. CHARGE[...]

36 appendix Problem Possible cause(s) Solution(s) Bad audio quality (crackles,echo, etc.). 1. Interference from nearby electrical appliance. 2. Base unit is installed in a room with thick walls. 3. The handset is too far from the base unit. 4. If you have Broadband/ADSL you need an in line lter (not supplied) connected where this product connect[...]

37 appendix Problem Possible cause(s) Solution(s) The battery icon is not scrolling when the handset is placed on the base. 1. Bad batter y contact. 2. Dirty contact. 3. Batter y is fully charged 1. Move the handset slightly . 2. Clean the battery contact with a dr y cloth. 3. Its ne to leave on the base when fully charged. A phonebook entry can[...]

38 appendix Oricom makes no other warranties or conditions, express or implied, including as to merchantability and tness for a particular purpose, except as stated in this Warranty . An y implied warranties that may be imposed by law are limited in duration to the Warranty Period. Oricom warrants that the product is free from defects in materia[...]

39 uninterrupted or error free. Oricom is not responsible for damage that occurs as a result of your failure to follow the instructions that came with the product. These terms and conditions together with any specic terms and conditions contained in the user guide to the product purchased constitute the complete and exclusive agreement between y[...]

40 (v) modication to the product or services carried out to the product by anyone other than Oricom or on Oricom’ s behalf. Or ico m wi ll no t be li abl e fo r c on se que nt ia l l os se s i nc ludi ng lo ss o f pr ot s ar isi ng f rom a ca us e of ac ti on in c ont ra ct , t ort o r any ot he r st atu tor y o r co mmo n law ( exc ep t wh[...]

41 appendix The grant of a T elepermit for an y item of terminal equipment indicates only that T elecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by T elecom, nor does it provide any sort of warranty . Above all, it provides no assurance that any item wi[...]

Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Customer Support Email: support@oricom.com.au Web: www.oricom.com.au Phone: 1300 889 785 Fax: (02) 4574 8898 TM Customer Support If you suspect your product is not functioning to specication, before making a warranty c laim please use the following resources. - T roubl[...]