Panasonic DP-C406 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 112 pages
- 5.5 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Printer
Panasonic DP-1810F
155 pages 4.52 mb -
Printer
Panasonic KX-P6100
44 pages 1.59 mb -
Printer
Panasonic NV-MPD1EN
118 pages 5.78 mb -
Printer
Panasonic KX-MC6040
124 pages 4.13 mb -
Printer
Panasonic KX-PX10M
112 pages 4.07 mb -
Printer
Panasonic KX-P7100 series
2 pages 0.78 mb -
Printer
Panasonic KX-MC6040CX
24 pages 1.28 mb -
Printer
Panasonic KX-P1150
52 pages 2.12 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Panasonic DP-C406. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Panasonic DP-C406 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Panasonic DP-C406 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Panasonic DP-C406 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Panasonic DP-C406
- nom du fabricant et année de fabrication Panasonic DP-C406
- instructions d'utilisation, de réglage et d’entretien de l'équipement Panasonic DP-C406
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Panasonic DP-C406 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Panasonic DP-C406 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Panasonic en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Panasonic DP-C406, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Panasonic DP-C406, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Panasonic DP-C406. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Digital Color Imaging Systems Operating Instructions Before operating this machine, please carefully read this manual and keep this documentation in a safe place for future reference. (Illustration shows optional accessories that may not be installed on your machine.) English (For Copier) Model No. DP -C40 6 / C306 / C266[...]
-
Page 2
2 Oper ating Inst r u ctio ns The foll owing Operating I nstruction manuals ar e included with thi s machine. Please ref er to the appropr iate manual and keep all manuals for future ref erence. If you lose the manual, c ontact the authori zed Panas onic deal er . Acces sories Quick Referen ce Guide Descri bes the basi c proc edures fo r each funct[...]
-
Page 3
3 Con v en tion s Icons The follow ing icons ar e use d in this m a nual. Notation Th e f ol l owi n g no tat ions ar e us ed i n thi s man ual. Ico n Descrip tion Indi cates impor tant in formation t hat must be read in det ail . Indi cates ref erence i nfo rmatio n. Not ation Descr ipti on For Keys and But tons Hard butt ons on the Contr ol Panel[...]
-
Page 4
4 T a b le of Co nte n ts Cha pter 1 Ba sic M enu Feat ure s Placing Or iginals...... .................. ............................ ................... ................... ......... ......... .. .... 6 How to Place Origina ls .......... ................... ................... ......... ......... .......... .................. ...... 6 Basic Oper a[...]
-
Page 5
5 Copying Facing P age Ori ginal o nto Two S eparate S heet s ............... .......... ...... “ 2 Pag e ”4 6 Copying Facing P age Ori ginal o nto a 2-S ided Shee t ............... ................... .. “ Bo ok -> 2 ”4 7 Copying Multip le Pa ges onto a S ingl e Sheet (N in 1 Copy) .............. .......... ........ “ N in 1 ”4 9 Co[...]
-
Page 6
6 Chap te r 1 Basic Me nu Feat ures Chapter 1 B as i c M e nu F e atu r es Placin g Orig in als How to P lace Originals z On t he ADF Ac ceptabl e Pap er T ype Or ig in a l Siz e : A3, B4, A4, A4-R, A5, A5-R, FLS (8" x 13", 8.5" x 13" ) , 5.5" x 8.5" (Invoice), 5.5" x 8.5" (Invoice-R), 8.5" x 1 1" ([...]
-
Page 7
7 Chap te r 1 Basic Me nu Feat ures Not ice fo r Plat en Gl ass Align the original to the top left corner mark ( ). z If t he origina l is not positioned properly , a po r tion of the original may not be copied. z For originals smaller than 5.5" x 8.5" (Invoice) size, pos it ion the original within the 5.5" x 8.5" area and selec[...]
-
Page 8
8 Chap te r 1 Basic Me nu Feat ures Basic Op er a tion Procedu re Th e mac hin e aut o mat ical l y de te ct s ori gi n al( s) an d d ec id es on the Cop y Si ze an d Co l or mod e t o u se. If the detection fa il s, manuall y set the setti ngs. 1 Place or igi nal(s) . z Refer to Placing Or iginals (s ee p age 6). 2 Press th e Copy key if the m ach[...]
-
Page 9
9 Chap te r 1 Basic Me nu Feat ures 4 Enter the de sired number of copies. (Up to 999) z W hen inputting a number (4 t o 8 digits) wi th the optiona l Fax Co mmunication Board in stalled , th e m ach ine au tom at ically inte r p rets it as a t elephone number , swi tches to the Fax mode , and displays the N umber Pad screen. z The num ber of digit[...]
-
Page 10
10 Chap te r 1 Basic Me nu Feat ures Copyin g w ith Pr ese t R a tio s (Reduct ion / Enl argement ) Y ou can easil y enlarge or r educe the copy size by selectin g the preset si ze with the Copy S ize buttons. z T o c hange th e assign ed paper size of Cop y Size bu ttons, select “ Paper/ O utp ut T ray ” and modify the sett ings. For set ting [...]
-
Page 11
11 Chap te r 1 Basic Me nu Feat ures Sele ct in g th e Col or M od e Y ou can copy in t he Color mode selected by the machine, or select the Color mode m anually . z The default Co lor mode settings can be changed . Refe r to Copi er Settings (Key Operator Mode) in the Operat ing Instructions (F or Func tion Paramet ers) of p rovided CD-ROM . z The[...]
-
Page 12
12 Chap te r 1 Basic Me nu Feat ures Blac k Mode Col or and m ono c hrom e orig ina ls c an b e c opie d in blac k an d whi te . 1 Select “ Bl ack ”, and t hen select “ OK ”. z T o display this screen, refer t o steps 1 to 3 of Selecting th e Color Mode (see page 1 1). z For the following procedure, refer to steps 5 to 6 of Selecting the Co[...]
-
Page 13
13 Chap te r 1 Basic Me nu Feat ures 2 Co lor Mo de Col or or iginal can be co pied in 2 colo rs , whic h can be ach ieve d by us in g blac k an d an othe r spe cifie d color . The specifi ed color can be selected fro m the basic colo rs (red, g reen, blue , yellow , magent a, and cyan) and th e regist ered col ors. z W hen the 2 Col o r mode is se[...]
-
Page 14
14 Chap te r 1 Basic Me nu Feat ures 4 Select “ OK ”. Ex : “ Green ” is select ed. z For the following procedure, refer to steps 5 to 6 of Selecting the Color M ode (see page 11 ) .[...]
-
Page 15
15 Chap te r 1 Basic Me nu Feat ures 1 Co lor Mo de Col or an d mo noch ro me or iginals can be copie d in o ne sp ecified c olor . The c olor can b e selec ted fro m the basi c color s (red , green, blue, yello w , magent a, and cyan) a nd the regis ter ed co lors. z W hen the 1 Col o r mode is selected, the Original T y pe setting selection is no[...]
-
Page 16
16 Chap te r 1 Basic Me nu Feat ures 4 Select “ OK ”. Ex : “ Green ” is select ed. z For the following procedure, refer to steps 5 to 6 of Selecting the Color M ode (see page 11 ) .[...]
-
Page 17
17 Chap te r 1 Basic Me nu Feat ures New Colo r Registratio n 1 Select “ Ad d Cu st o m ”. z T o displ ay this screen, r e fer t o steps 1 to 2 of 2 Co l or Mod e (see page 13). 2 Select an y butto n without a color name re gistere d, an d then select “ OK ”. Wh en ch an ging t he re giste red color Select t he regist ered color n ame b[...]
-
Page 18
18 Chap te r 1 Basic Me nu Feat ures 5 Enter the or iginal col or nam e wi th t he Keyboar d, and the n select “ OK ”. z Up to 20 c harac ters c an be entered. z For inst ructions on how to enter characters, re fer to Using the Ke yboard in the Operating Instructions (F or Funct ion Parameters) of provided CD-ROM. 6 Confir m the regist ered col[...]
-
Page 19
19 Chap te r 1 Basic Me nu Feat ures Me mo[...]
-
Page 20
20 Chap te r 1 Basic Me nu Feat ures Sele c tin g Ori g ina l Type and A dj ust in g th e Densit y Sel ect t h e or igin al t ype co rres p ondi ng t o you r doc u ment s. Adjus t the copy d ensity accor ding to y our req uirement s. z The Original T ype setting selection is not available when the 2 Color or 1 Color m ode is selected. z T o c hange[...]
-
Page 21
21 Chap te r 1 Basic Me nu Feat ures 5 Adjus t the d ensity using “ Lig ht er ” or “ Dar ker ”, and then select “ OK ”. 6 Ente r the desired num ber of cop ies. 7 Pr ess the St art key . z After f inishing copying, press the Reset ke y t o return to t he ini ti a l screen of the currently ac tive mode. T ext Select when copying tex t wi[...]
-
Page 22
22 Chap te r 1 Basic Me nu Feat ures R e gisterin g Q uality Pr eset Save yo ur favorit e quali ty adju stment setting b y regi sterin g up to 5 Quality Pre sets. The f ollowing quality adj ustment se ttings c an be re gister ed: • Auto, Black, Full Color , 2 Color , or 1 Colo r • Or igi na l T ype • Density More Set tings • Ba ckgr o un d [...]
-
Page 23
23 Chap te r 1 Basic Me nu Feat ures 6 Select a Quality P reset butto n, and then select “ OK ”. Wh en r egis terin g a ne w Qu ality Pres et Select a n em pty Q uality Pres et bu tton. Wh en u pdat ing a re gist ere d Qua lity Pre set Select the registered Qual ity Pr e set button. 7 Ente r the Quality Pre set name, a n d then se l ect[...]
-
Page 24
24 Chap te r 1 Basic Me nu Feat ures Using Qua lity Pr eset Y o u ca n recall t h e regi stered quality adjust ment setti ngs by the f ollowin g proced ures. z For details on how t o register image quality adjustment se ttings into Quality Preset, refer to Registering Qual ity Prese t (see page 22) . 1 Place or igi nal(s) . z Refer to Placing Or ig[...]
-
Page 25
25 Chap te r 1 Basic Me nu Feat ures Quality Adju sting Imag e qu ali ty item s can be e asily set by sele ctin g fro m 4 imag e qu ali ty types (L ively , Bright , Warmer , and C o oler). Addit ionally , i n the Cu stom Settin g sele ction, t he fol lowin g 7 image quality adjust ments can be set . • Background Removal • B le edTh ro ugh Prev [...]
-
Page 26
26 Chap te r 1 Basic Me nu Feat ures z If “ T racingPap er ” is selecte d in “ Origin al Ty p e ”, the B leedThroug h Prevent ion is set to 3 regardless of t he sele cted image qual ity type. z The def ault values are set up on shi pment. Key operations can change the se values. Refer to Copie r S ett ings i n the Operating Instruct ions (F[...]
-
Page 27
27 Chap te r 1 Basic Me nu Feat ures Backgr ound Removal The orig inal c an be c op ied w ith the ba c kgro und c olo r rem oved . Th is func tion is us eful when copy ing new spape rs or a n or igin al with back gr ound c olor. z The setting of Background Rem oval becomes invalid i f “ Photo ” is select ed i n “ Or ig in al T y p e ”. 1 Se[...]
-
Page 28
28 Chap te r 1 Basic Me nu Feat ures Ble edThr ough Pr ev enti on Thi n she ets of orig in al can be cop ied wit hout blee ding t hroug h. z The setting of Blee dThrough P revention becom es invalid if “ Ph ot o ” is sele cte d in “ O rig in a l T y pe ”. z W hen setting the T int adjustm ent to More Blue or More Red, the copies may come ou[...]
-
Page 29
29 Chap te r 1 Basic Me nu Feat ures Tint Th e o ri ginal can be co pi ed w i t h r edd ish or blu ish col o r ac cen tu at ed. 1 Select “ Tint ”. z T o displ ay this s creen , ref er to step 1 of B ackground Remo val ( se e p a ge 27 ) . 2 Adjus t the co lor ton e with “ Mor e Red ” or “ More Blu e ”, and then select “ OK ”. z The [...]
-
Page 30
30 Chap te r 1 Basic Me nu Feat ures Contras t The or iginal ca n be co pied with the adj usted co ntrast. 1 Select “ Contrast ”. z T o display this screen, refer to step 1 of Backgrou nd Removal (see page 2 7). 2 Adjust the contrast with “ Lo wer ” or “ Higher ”, and then select “ OK ”. z The screen will return to st ep 1. Sel ect [...]
-
Page 31
31 Chap te r 1 Basic Me nu Feat ures Sharpne ss Th e o ri ginal can be co pi ed b y sof te nin g or sh ar pen ing th e out li ne o f th e i mag e. 1 Select “ Sh arp ne ss ”. z T o displ ay this s creen , ref er to step 1 of B ackground Remo val ( se e p a ge 27 ) . 2 Adjus t the sh arpn ess with “ Low er ” or “ Higher ”, an d then selec[...]
-
Page 32
32 Chap te r 1 Basic Me nu Feat ures Saturatio n The or iginal ca n be co pied with the adj usted sa turati on. 1 Select “ Satu rat ion ”. z T o display this screen, refer to step 1 of Backgrou nd Removal (see page 2 7). 2 Adjust the saturat i on with “ Low er ” or “ Higher ”, and then select “ OK ”. z The screen will return to st e[...]
-
Page 33
33 Chap te r 1 Basic Me nu Feat ures Color B alance Th e o ri ginal can be co pi e d wi t h t he a dj us ted d en si ty l eve l (Da r ker , Me dium , an d Lig ht er) of Y ell ow , Ma gen ta, Cyan , a nd Blac k. z The density of each color c an be fine tuned f or eac h of the three density level s. This function is useful for the fine adjustment of [...]
-
Page 34
34 Chap te r 1 Basic Me nu Feat ures Proof C op ying Wh en ma king more th an one copy , the fir st cop y ca n be prin ted as a proof copy . Aft er conf irmin g its q uality , the r emaining co pies ca n be prin ted. 1 Place or igi nal(s) . z Refer to Placing Or iginals (s ee p age 6). 2 Press th e Copy key if the m achine is set to othe r function[...]
-
Page 35
35 Chap te r 1 Basic Me nu Feat ures Con fir mi ng/E di ti ng th e Sel ect ed Co py F e a t ures Befor e copying, t h e setti ngs of “ More Me nus ” c an be c hec ked, cha nged, an d delet ed. 1 Select “ Co nfirm S etting s ”. 2 Check t he settin gs, and then select “ Close ”. z If “ C onfi rm S ettin gs ” is selected, the setting s[...]
-
Page 36
36 Chap te r 1 Basic Me nu Feat ures Stor i ng a J ob i n Memor y A co py job can be reg ist ered as a p rese t job. It is usef ul to regi ster th e freq ue ntly us e d sett ings a s Pre set J o bs. z Re fe r to Recalling a Preset Job Stored in Mem ory (see page 37). z Onc e r e gistered, t h e copy job settings are kept in the job memory until the[...]
-
Page 37
37 Chap te r 1 Basic Me nu Feat ures R ecallin g a Preset J o b Stored in Me mor y The spec ific c opy job will be do ne by reca llin g the re gister ed pre set jobs . z Re fe r to Stor ing a J ob in Mem ory (see page 36). 1 Place or iginal (s). z R efe r to Placing Orig inals (see page 6). 2 Press th e Copy key if the m achine is set t o other fun[...]
-
Page 38
38 Chap te r 1 Basic Me nu Feat ures Chec king the W a itin g to Cop y J ob A lis t o f job s c ur rent ly be in g prin te d or wait in g to print can be di sp laye d. Th e follo wing t ype s of j ob s c an be dis p laye d. • A ll jo bs •C o p y j o b s Waiting to prin t jobs c an be d ele ted. Displaying a List of All Jobs A list of all the jo[...]
-
Page 39
39 Chap te r 1 Basic Me nu Feat ures Deleting Copy Jobs Th e j obs in t he Re ad y st atus ca n be de l ete d . 1 Select “ Co py ” in th e Outp ut Queue screen. z T o displ ay the Output Queue screen, refer to C hecking the W ai ting to Co py Job (see page 38). 2 Select a job, and then select “ Delete ”. z W hen dele ting all j obs, select [...]
-
Page 40
40 Chap te r 1 Basic Me nu Feat ures Completion Notice If th e Completi on Noti ce i s set, y ou wil l be n otified on your co mputer when copyi ng is c ompleted. z Before us ing t h is function, install the Panasonic Documen t Mana gement System and Printer Driver , and then conf igure each soft wa re. z T o register t he IP Addres s of you r com [...]
-
Page 41
41 Chap te r 1 Basic Me nu Feat ures Me mo[...]
-
Page 42
42 Chap te r 2 More M en us Fe at ures Chapter 2 Mor e Me n u s F e atu r es 2- Side d C op y Mod e z The s tandard set ting of “ 2-Sid ed / Orig inal- >Co py ” can be chang ed. Refer t o Copi er Set ti ngs in the Operat ing Instructions (F or Func tion Pa rameters) of provided CD-ROM . z S pecial papers such as cardboard cannot be used for [...]
-
Page 43
43 Chap te r 2 More M en us Fe at ures Copying 1 -Sided Or iginals onto 2-Sided Sheets T wo 1- side d or igin als ca n b e cop ied on to on e 2-s ide d sh ee t. The 1st or igin al ’s imag e is co pie d o nto the front side a nd the 2nd ori ginal’ s image is co pied onto t he back side o f the sheet. 1 Select “ 2-S ided / Or iginal ->Copy ?[...]
-
Page 44
44 Chap te r 2 More M en us Fe at ures Copying 2 -Sided Or iginal(s) o nto Two Separate Sheets 2-s ide d origin al( s) ca n be c opi ed as separa ted in to two 1-s ided pages. 1 Select “ 2-S ided / Orig inal->Copy ”, and then select “ 2 - > 1 ”. z T o display this screen, refer t o steps 1 to 3 of Basic Operation for the 2-Sided Copy [...]
-
Page 45
45 Chap te r 2 More M en us Fe at ures Copying 2 -Sided Or iginal onto 2 -Sided She et 2-s ide d origin al c an be c opie d on to 2-s ided shee t (sa me as the orig inal). 1 Select “ 2-S ided / Or iginal ->Copy ”, and then select “ 2 -> 2 ”. z T o displ ay this screen, r e fer t o steps 1 to 3 of B asic Operation for the 2-Sided Cop y[...]
-
Page 46
46 Chap te r 2 More M en us Fe at ures Copying Fac ing Page Or iginal onto Two Se parate S heets Faci ng pag es or a 1 1” x 17” si ze orig inal c an b e cop ied as separ ated into t wo 1-s ided s heets. 1 Select “ 2-S ided / Orig inal->Copy ”, and then select “ 2 P ag e ”. z T o display this screen, refer t o steps 1 to 3 of Basic Op[...]
-
Page 47
47 Chap te r 2 More M en us Fe at ures Copying Fac ing Page Or iginal onto a 2 -Sided Sheet Faci ng pag es or an 1 1" x 17" s ize or igin al ca n be co pie d as sepa rate d int o one 2-sid ed s heet . 1 Select “ 2-S ided / Or iginal ->Copy ”, and then select “ Book -> 2 ”. z T o displ ay this screen, r e fer t o steps 1 to 3[...]
-
Page 48
48 Chap te r 2 More M en us Fe at ures 5 Select the Copy F ormat, an d then select “ OK ”. z For the following procedure, refer to steps 5 to 6 of Basic Ope ration for th e 2-Sided Copy M ode ( see page 42). The fir st through la st p age are copied. The fir st page and bey ond are copied, but the la st page is not copied. The fi rst p age is n[...]
-
Page 49
49 Chap te r 2 More M en us Fe at ures Copying Multiple Pages o n to a Single Sheet (N in 1 Copy) Mu ltiple page s (2, 4 or 6 s he ets) ca n be co pie d ont o a sing le sh ee t. The imag es of o rigina ls are reduc ed to fit into the si ze of th e copy p aper . 1 Select “ 2-S ided / Or iginal ->Copy ”, and then select “ N in 1 ”. z T o d[...]
-
Page 50
50 Chap te r 2 More M en us Fe at ures 3 Select the Orien ta tion of the or iginal. 4 Select the desire d copy mode . Whe n 1 -> 2, 2 -> 1 or 2 -> 2 is s elec ted Select the bind position of the o riginal, and then sele ct “ OK ”. Ex: Whe n 1 -> 2 is selected for “ 2 in 1 ” When 2 -> 2 i s selected, select the bind positi[...]
-
Page 51
51 Chap te r 2 More M en us Fe at ures 5 Select th e Layou t format, and th en select “ OK ”. Wh en 2 in 1 is sele cte d Wh en 4 in 1 is sele cte d Wh en 6 in 1 is sele cte d z For the following proc edure, refer to steps 5 to 6 of Basic Ope ration for th e 2-Sided C opy Mod e (see page 42).[...]
-
Page 52
52 Chap te r 2 More M en us Fe at ures Copying Or iginals with Saddl e-Stitc h Binding (Booklet) z Origina ls shou ld be p laced on the ADF . (5.5 " x 8 .5" or 8. 5" x 1 1" si ze is only availab le, up to 6 0 originals) z Sad dle-stitch binding is po ssible only when the opt ional 1 Bin Sadd le-S t itch Finisher (DA-FS 405W) i s[...]
-
Page 53
53 Chap te r 2 More M en us Fe at ures When “ 2 Si ded ” is se le cted Select t he bind position of the original, an d then select “ OK ”. 3 Select th e bind p osition fo r the copy . 4 Selec t the co ver p age type if necessar y . Sel ec t “ Cover ”. Se lect t he co ver typ e. z When “ Blank ” is select ed for the co ver type, [...]
-
Page 54
54 Chap te r 2 More M en us Fe at ures 5 Select “ OK ” to exit the co ver se ttings. 6 Select “ OK ”. z For the following procedure, refer to steps 5 to 6 of Basic Ope ration for th e 2-Sided Copy M ode ( see page 42). z When th e fold position doe s not matc h w it h the center position of the copi es, s e t t he binding margin . Refer to [...]
-
Page 55
55 Chap te r 2 More M en us Fe at ures Copying Mix ed Size Originals from the ADF Use th is funct ion when copyin g mixed siz e ori ginals ( 8.5" x 1 1" and 1 1" x 17", o r 5 .5" x 8. 5", 8.5 " x 1 1"-R , an d 8.5" x 14 " (L egal) ). Using the A DF , orig ina l siz e c an be d etec ted au toma tica [...]
-
Page 56
56 Chap te r 2 More M en us Fe at ures 3 Select the desire d copy mode, and then select “ OK ”. Whe n 1 -> 2, 2 -> 1 or 2 -> 2 is s elec ted Select the Orientation of the original. Select the bind position of the o riginal, and then sele ct “ OK ”. Ex: When 1 ->2 is selected When all o rigi nals are ver tica lly lo ng Ex: Wh[...]
-
Page 57
57 Chap te r 2 More M en us Fe at ures When 2 ->2 is selected , select “ Change ” and select the bind position for the copy , and t hen sele ct “ OK ”. 4 When copying t he same p aper size, select “ Basic Menu ” , and then se lect a desi red cop y size with t he Copy Size buttons. z For the following proc edure, refer to steps 5 to 6[...]
-
Page 58
58 Chap te r 2 More M en us Fe at ures Copying S pecial Originals (Thin Paper, etc .) fr om the ADF SAD F Thi s mo de add s a 5-s e cond delay to allo w an othe r orig in al to be place d on the AD F . S p ecia l origina ls (thi n pape r , e tc.) c an be f ed fro m th e AD F and copie d con ti nuous ly u sing the SA D F mode . 1 Plac e one ori [...]
-
Page 59
59 Chap te r 2 More M en us Fe at ures Job Build Thi s is use ful fo r cop ying mult ipl e sets of ori gin als t hat exc eed th e maxim um capac ity of the A DF o f 100 s he ets (20 lb/ Let ter). (See the ex am ple below .) Ex : T o make 5 set s of sorted copies of 1 15-sheet of orig inal s. (a) Plac e the fir st 10 0 she et s of or i gin als o[...]
-
Page 60
60 Chap te r 2 More M en us Fe at ures Sor t Mo de Th e o ri ginal can be co pi ed, pri nted , a nd so r ted i n a s pe ci fi e d n umb er of set s. Th e f ol l owi n g F in is h ing modes are av a il able w h en t he op ti o na l Fi nis h er a nd P unc h Uni t ar e ins t a lle d. z Only 8.5" x 1 1" (Letter/Let ter-R) s ize is applicable [...]
-
Page 61
61 Chap te r 2 More M en us Fe at ures 1 Place or iginal (s). z R efe r to Placing Orig inals (see page 6). 2 Press th e Copy key if the m achine is set t o other fun ction m ode. 3 Select “ Mor e M enu s ”. 4 Select “ Sort / Fi n ish ”, and then sele ct a sort mo de. Wh en o ptio nal Fi nishe r is no t ins talled When the o ption a[...]
-
Page 62
62 Chap te r 2 More M en us Fe at ures Wh en th e op tiona l 1B in Fin ishe r is ins talled z When “ Stapl e- S ort ” is selected, ref er to th e fol lo wi ng . Select the Orientation of the original, and then the S tap le position. 5 Ente r the desired num ber of cop ies. 6 Pre ss the Sta rt key . z When c opying f rom t he P laten Glass ,[...]
-
Page 63
63 Chap te r 2 More M en us Fe at ures Me mo[...]
-
Page 64
64 Chap te r 2 More M en us Fe at ures Zoom M ode Variable Ratio s The or iginal ca n be co pied by se tting the Enla rgement/Re ductio n Ratio. 1 Place or igi nal(s) . z Refer to Placing Or iginals (s ee p age 6). 2 Press th e Copy key if the m achine is set to othe r function mo de. 3 Select “ More Me nus ”. 4 Select “ Zoom / E ff e cts ”[...]
-
Page 65
65 Chap te r 2 More M en us Fe at ures 6 Enter the zoo m ratio with “ S ” and “ T ”, or the K eypad , and then sele ct “ OK ”. z The ratio can be set in 1% increments fr om 25% to 400%. z W hen changing the paper size af ter setting the zoom rat io, sel ect “ Basic Men u ”, and select “ Pa pe r/Ou tput T r ay ”, and then select [...]
-
Page 66
66 Chap te r 2 More M en us Fe at ures Auto Zo om By setti ng Aut o Zoom, ori gina ls can be automatica lly enlarged/r educed to fit the size of th e l oaded paper. z This fun ction can be s electe d when the original is placed on the Platen Glass. z As the original is placed on the Platen Glass, the position of the original may be erroneously dete[...]
-
Page 67
67 Chap te r 2 More M en us Fe at ures 5 Select th e desir ed zoo m type ratio, and then select “ OK ”. 6 Select th e desir ed size o f p aper , and then select “ OK ”. 7 Enter the de sired number of copies. 8 Press th e St art ke y . z W hen copying from the Platen Gl ass, plac e the next original, and follow the instructions des cribed on[...]
-
Page 68
68 Chap te r 2 More M en us Fe at ures Ef fect Mo de s Setting a Blank Edge Unn ece ss ary ed ge ca n be eras ed b y settin g a bl an k edg e. z W hen “ Zoom ” is selected, the erasing widt h varies depending on the zoom ratio. 1 Place or igi nal(s) . z Refer to Placing Or iginals (s ee p age 6). 2 Press th e Copy key if the m achine is set to [...]
-
Page 69
69 Chap te r 2 More M en us Fe at ures 6 Enter the erasi ng wid th with “ S ” and “ T ”, or the Keyp ad , and t hen sele ct “ OK ”. z The erasing width can be set in 1 m m incr ements from 5 mm to 99 mm. 7 Enter the de sired number of copies. 8 Press th e St art ke y . z W hen copying from the Platen Gl ass, plac e the next original, an[...]
-
Page 70
70 Chap te r 2 More M en us Fe at ures Eliminating Dark Inner Binding Shadows Wh en co pyin g ori gin al such as th e cen ter of fold ing p ositio n may be shad ed, the sh ade c an be e as ily elim in ated . z W hen “ Zoom ” is selected, the erasing widt h varies depending on the zoom ratio. z W hen “ Overlay ” or “ Fo r m O ver la y ” [...]
-
Page 71
71 Chap te r 2 More M en us Fe at ures Shif ting I mage to R ight, L eft, Up, or Do wn The mar gin can be added on a ny 4 sid es of the image wi th th e i m age sh if ted t o the r ight, lef t, up, or dow n ac cor d in gly . z If a p art of the copied image is missing, change the Margin Reduction setting to “ Ye s ” . Re fe r to Co pier Setting[...]
-
Page 72
72 Chap te r 2 More M en us Fe at ures 5 Select the desire d positio n of th e bindin g mar gin. 6 Enter the wid th of the b inding m arg in with “ S ” and “ T ”, or t he Keypad, and then select “ OK ”. z The widt h of the binding margin can be set in 1 mm increments from 5 mm to 99 mm. 7 Ente r the desired num ber of cop ies. 8 Pre ss [...]
-
Page 73
73 Chap te r 2 More M en us Fe at ures Copying Mir ror Im age The later ally re vers e d ima ge of or igi nal ca n be co pie d. 1 Place or iginal (s). z R efe r to Placing Orig inals (see page 6). 2 Press th e Copy key if the m achine is set t o other fun ction m ode. 3 Select “ Mor e M enu s ”. 4 Select “ Zoo m / Effe c ts ”, and then sele[...]
-
Page 74
74 Chap te r 2 More M en us Fe at ures Copying with S tamping Page N umb er o r Date, etc . can be stam ped on ea ch sh eet . z This fun ction can be s electe d wh en the original is placed on the ADF . z Only one kind of stamp can be selected from Pag e Number , Is sue Numbe r , Da te, and T ex t / Number f or each scan job . z S tamped only in bl[...]
-
Page 75
75 Chap te r 2 More M en us Fe at ures Pag e Numbe r The orig inal c an be c op ied w ith page num ber s prin ted. z The def ault is -n- (number) format. T o change to n/m (number/ma ximum) format, refer to C opier Sett ings in the Ope rating Instructions (For Function Param eters) of provided CD-ROM. z Make sure to select “ So rt ”. 1 Sele[...]
-
Page 76
76 Chap te r 2 More M en us Fe at ures 5 If “ Change ” was select ed in step 4, select t he S tar ting Page. 6 If “ Change ” was select ed in step 4, enter the S t arting Numbe r with “ S ” and “ T ”, or th e Keyp ad, a nd th en select “ OK ”. z S tarting page number can be set from 1 to 999. 7 Select “ OK ”. z For t he foll[...]
-
Page 77
77 Chap te r 2 More M en us Fe at ures Issue Nu mber Th e o ri ginal can be co pi ed w i t h co n sec ut i ve nu mbe rs fr o m 00 1 to 99 9 pri nted . z The Issue Num bers can be set fr om 001 to 999. After 999, the num ber returns t o 001. 1 Select “ Issu e Num ber ”. z T o displ ay this screen, r e fer t o steps 1 to 4 of B asic O peratio[...]
-
Page 78
78 Chap te r 2 More M en us Fe at ures 4 Enter the S tar ting Number with “ S ” and “ T ”, or th e Keyp ad, a nd th en select “ OK ”. z For the foll owing steps, refer to steps 5 to 6 in the Basic Operation for St amping (s ee page 74). Each ti me it is selec ted, the number inc rement s by 1 . Each ti me it is selec ted, the number de [...]
-
Page 79
79 Chap te r 2 More M en us Fe at ures Date Th e o ri ginal can be co pi e d wi t h a d at e p rin ted. The d at e is pr i nt ed i n t h e MM/ DD/ YYYY fo rm at . 1 Select “ Da te ”. z T o displ ay this screen, r e fer t o steps 1 to 4 of B asic O peration fo r St amp ing (see p age 74) . 2 Select th e Orien ta tion of the or iginal. 3 Sele[...]
-
Page 80
80 Chap te r 2 More M en us Fe at ures Move t he c ursor to the desired posi tion using and . Change the date with the Keypad. 5 Select “ OK ”. z For the foll owing steps, refer to steps 5 to 6 in the Basic Operation for St amping (s ee page 74).[...]
-
Page 81
81 Chap te r 2 More M en us Fe at ures T ext / Number The orig inal c an be c op ied w ith te xt and page/is su e nu mbe rs prin ted. z Page numbers are printed in -n- (number) f ormat. z Page and i ssue num bers can be entered from 001 to 999. Afte r 999, the number returns to 001. z Up to 32 charact ers, in cluding A to Z, a to z, 0 to 9, sym[...]
-
Page 82
82 Chap te r 2 More M en us Fe at ures 5 Enter text, an d then select “ OK ”. z Up to 32 c harac ters c an be entered. z For inst ructions on how to enter characters, re fer to Using the Ke yboard in the Operating Instructions (F or Funct ion Parameters) of provided CD-ROM. 6 Select “ Page ” or “ Issue ”. 7 Enter the S tar ting N umber [...]
-
Page 83
83 Chap te r 2 More M en us Fe at ures Center ing The copy ing im a ge ca n be ce nte red a utom atic all y on a sel ec ted pa per . z This function can be se lected when the original is placed on the Platen Glass. z As the original is placed on the Platen Glass, the position of the original may be erroneously detec ted if influenc ed by ambient li[...]
-
Page 84
84 Chap te r 2 More M en us Fe at ures Image R epeat Cre ate m ult iple imag es on a shee t fro m a si ngle o rigi nal . z Dotted lines can be printed betwee n each of the copied images. Refer to Copi er Se ttin gs in the Operating Instructions (For Function Parameters) of provi ded CD - ROM . z This fun ction can be s electe d when the original is[...]
-
Page 85
85 Chap te r 2 More M en us Fe at ures Copying I nverse Im age Th e ton al in ve rsi o n of i mag e can be copi e d in bl ack an d w hit e . z This function is only avai lable whe n “ Black ” is selected in the Color mode. If the “ Inverse ” is selected when the other Color m ode has been set, a mes sage appears prompting you to chan ge the[...]
-
Page 86
86 Chap te r 2 More M en us Fe at ures In ser t ion M od es Adding a Cov er Page to Copi es The orig inal c an be c op ied us ing ot he r types of pap er for a cov er page. On ly the F ront cov er , o r Fron t and Back c overs ca n be sele cted. 1 Place or igi nal(s) on th e ADF . z Refer to Placing Or iginals (s ee p age 6). 2 Press th e Copy key [...]
-
Page 87
87 Chap te r 2 More M en us Fe at ures 5 Select th e Front, o r Front and Back covers. 6 Select “ Cover ” unt il the desi red P aper T r ay is displaye d. z W hen changing paper for copies other than the cover page, select “ Copy ”, and change the Paper Tr ay . z W hen using color or S pecial paper for the cover page, place the p ap er in t[...]
-
Page 88
88 Chap te r 2 More M en us Fe at ures Insert ing Blank/Copied Pages Between Copies The orig inal c an be c op ied by inse rting other typ es of pape r be twe en sp ecif ied page s. Y o u can copy s pe cified pages (in c luding the c ove r page ) on pape r su ch as c olore d pap er set in a Pape r Tray or on the Sh ee t By p a ss. 1 Place or igi na[...]
-
Page 89
89 Chap te r 2 More M en us Fe at ures 7 Select “ OK ”. 8 Enter the pag e num bers w ith Keyp ad wher e the i nsertio n pages are placed. z T o eras e an entered number , press the C lear ke y . 9 Select to ente r the following page numbers whe re the i nsertion page s are placed. z By se lecting and , move the cursor to enter t he insertion pa[...]
-
Page 90
90 Chap te r 2 More M en us Fe at ures Inserting Blank Page s Between Transparency Films 1 Place or igi nal(s) on th e ADF . z Refer to Placing Or iginals (s ee p age 6). 2 Press th e Copy key if the m achine is set to othe r function mo de. 3 Select “ More Me nus ”. 4 Place the T ransparen cy Films on the Sheet Byp a ss. z How to use the Sheet[...]
-
Page 91
91 Chap te r 2 More M en us Fe at ures Me mo[...]
-
Page 92
92 Chap te r 2 More M en us Fe at ures Ov er lay Modes Over laying an Im age onto the Co pies The orig inal c an be ov e rlaid w ith the fir st page of the o rigi nal. The firs t page is c alle d the o verl ay ori gin al, an d the s eco nd page onw ards are c all ed the scann ed origin al , res pectiv e ly . z The size a vailable for b oth of the o[...]
-
Page 93
93 Chap te r 2 More M en us Fe at ures 5 Select colors for the overlay original from the basic col ors or reg istered custom color s, and then select “ OK ”. When sele cting f rom the basic co lors When sele cting f rom the regist ered custo m colors z If “ Add Custom ” is selected, the Add C ustom screen is displayed, and colors ca[...]
-
Page 94
94 Chap te r 2 More M en us Fe at ures 11 If “ Ye s ” was selected in step 10, select a desi red button wi th no n ames regi stered, and then select “ OK ”. 12 Enter the button name with Keyboar d, and then select “ OK ”. z Up to 20 c harac ters c an be entered. z For inst ructions on how to enter characters, re fer to Using the Ke yboa[...]
-
Page 95
95 Chap te r 2 More M en us Fe at ures Over lay Copying with Registe red Image Overlay an image stored in memory onto the copy . z T o use th is function, overlay fo rms must be registered in adv ance. F or instructions on registering overlay forms, refer to File E di t (see page 97). z Available size is 8.5" x 1 1". z “ Auto ” can no[...]
-
Page 96
96 Chap te r 2 More M en us Fe at ures 5 Select the reg istered form , and then select “ OK ”. z For the details about how t o register the form, refer t o Save (see page 9 7). 6 Select the over lay position , and then select “ OK ”. 7 Enter the de sired n umber of copies. 8 Pre ss the Sta rt key . z When c opying f rom t he P laten Glass ,[...]
-
Page 97
97 Chap te r 2 More M en us Fe at ures File Ed it Up to 12 sett ings can b e reg istered f or t he overl ay form. z Re fe r to Ov erlay C opyin g with R egi stered Im age (s ee page 9 5). Save z The size of the orig inal, w hich can be regi stered in the form , is 8 .5" x 1 1". z After the registration, the form transparency level and[...]
-
Page 98
98 Chap te r 2 More M en us Fe at ures 6 Select “ Save ”, and then select “ OK ”. 7 Select color s for the fo rm from the basic co lors or regi stered custom colors , and then se lect “ OK ”. When sele cting f rom the basic co lors When sele cting f rom the regist ered custom colors z If “ Add Custom ” is selected, the Add C[...]
-
Page 99
99 Chap te r 2 More M en us Fe at ures 11 Enter the file name , and t hen sele ct “ OK ”. z U p to 20 cha r a cters can be entered. z For instructions on how to enter characters, refer to Using the Ke yboard in th e Operat ing Instructions (For F unction Paramet ers) of p r o v ided CD-ROM. z After com pleting the editing of the file nam e, pre[...]
-
Page 100
100 Chap te r 2 More M en us Fe at ures Era se 1 Select the file nam e to be de leted. z T o display th e File Edit screen, refer to steps 2 to 4 in S ave (s ee page 97 ). 2 Select “ Er ase ”, and then select “ OK ”. 3 Select “ Ye s ”. z After comple ting the deletion of the file, pre ss the Reset k e y to r et ur n to th e in iti a[...]
-
Page 101
101 Chap te r 2 More M en us Fe at ures Dou bl e Exp osu re Bot h side s (fr on t and ba ck) of a 2-si ded orig inal c an be c op ied on to one si de of a shee t. Fron t sid e of the orig inal is copie d at t he top of th e page, and th e ba ck sid e at t he bot tom. z This function is only availab le when c opy ing a 2-sided origina l that is smal[...]
-
Page 102
102 Chap te r 2 More M en us Fe at ures 7 Select “ Ye s ” to cop y the b ack side of the origina l. z The m essage i s different accordi ng to the Sort mode . For No n S ort : “Anot her Original?” is displayed. Sele ct “ Ye s ”. For Sor t : “Last O riginal?” i s displayed. Sel ect “ No ”. 8 Place the back side of the origin al o[...]
-
Page 103
103 Chap te r 2 More M en us Fe at ures Me mo[...]
-
Page 104
104 Chapte r 3 Other Fea ture s Chapter 3 Other Fea tures Maki ng Cop ie s wi th t h e AD F Op ened Th e o ri ginal can be co pi e d wi th o ut ge ne rat in g da rk bo rde r s ev en i f t he ADF i s ope ned. Digital Skyshot Mode The Dig it al Skysh ot mode can be select ed in the st andard se ttin gs. z W hen “ 2 Pag e ” or “ N in 1 ” is se[...]
-
Page 105
105 Chapte r 3 Other Fea ture s Manual Skyshot Mode The or iginal ca n be co pied wit h the pre-regist e red sc an size in memory . z Before using the Manual Skyshot mode, set M1 or M2 in t he preset jobs. Refer t o Copier Settings i n the Operat ing Instructions (F or Func tion Paramet ers) of p rovided CD-ROM . z Origina ls with black borders m a[...]
-
Page 106
106 Chapte r 3 Other Fea ture s R ese r vin g th e Next Copy J o b w h i le the Cur r en t Co p y J ob is Prog ressing The next cop y job can be re serv ed w hi le the curre nt co py jo b is und er wa y . z The previous copy jo b sett ings can be s aved if the Function P arameter “ 41 Reserve a Job Setting s ” (Copier Sett ings > Key Op erat[...]
-
Page 107
107 Chapte r 3 Other Fea ture s Inter r upting the Cur r ent Copy J obs to Mak e an U r gent Cop y Y o u can interr up t the cu rre nt copy jobs an d make an u rge nt copy . z W hen s canning t he current copy jo b, other copy jobs cannot be i nterrupted. 1 Press th e Inter rupt key while copying. z The machine doe s not accept a job whi le the Int[...]
-
Page 108
108 Chap te r 4 Appen dix Chapter 4 Appendi x Comb ined Cop y Functi ons 1 - > 2 2 - > 1 2 - > 2 2 P ag e Book -> 2 N in 1 Bookle t Mul ti-Size Fee d Job Build & S ADF Sor t Non Sort S hi ft- So r t S hi ft- Gr ou p Rot ate-S ort Rot ate -Grou p Staple- S ort Pun ch Zoom Auto Z oom 1 - > 2 / AAAA * 4 A 2 - > 1 A / AAA * 4 A x [...]
-
Page 109
109 Chap te r 4 Appen dix Edge Book Margin Mirror St a mping Centering Image Rep eat Inverse Cover Page Inse rtion T ran sparen cy I nt erl eav in g Ov erl ay For m Ove r la y Digit al Skyshot Manual S kyshot Completion Notice Interrupt Pr oof Cop y Double Expo sure 1 - > 2 x A AAA 2 - > 1 x x x AAA 2 - > 2 x x A x AAA 2 P ag e xxx A A A x[...]
-
Page 110
110 Chap te r 4 Appen dix Index Sym bol s “M 1:”/ “M2 : ” .... ... .. .. ..... ... .. ..... .. ... ..... .. ... ..... .. .. ..... ... .. ..... .. .. 3 6 Numer ics 1 - > 1 . .. ..... ... .. ..... .. ... ..... .. ... .... ... .. ..... ... .. ..... .. ... ..... .. ... .... .. 42 1 - > 2 . .. ..... ... .. ..... .. ... ..... .. ... .... ..[...]
-
Page 111
111 Chap te r 4 Appen dix O Or igin al G ui des ... ... .. ..... .. ... ..... .. .. ..... ... .. ..... ... .. ..... .. ... ..... .. . 6 Or igin al O r ien tat ion . ..... .. ... ..... .. .. ..... ... .. ..... ... .. ..... .. ... ..... .. . 7 Or igin al S i ze .. ..... ... .. ..... .. ... ..... .. .. ..... ... .. ..... ... .. ..... .. ... ..... .. .[...]
-
Page 112
Fo r Ser vice, Call: USA Only W ARRANT Y P ANA SONI C COMMUNI CA TIONS COMP ANY OF NOR TH AMERI CA MAKES NO W ARRAN TIE S, GUAR ANTEES OR REP RESENT A TIO NS, EXPRE SSED OR IMP LIED , TO CUSTOME R WITH RESP ECT TO THIS P ANA SONIC MACHINE, I NCLUD ING BUT NOT LIMITED T O, ANY I MPLIED W ARRANTY OF MERCHANT ABI LITY OR FITN ESS FOR A P ARTICULAR[...]