Panasonic PT-EZ580 PT-EW640 PT-EX610 PT-EW540 PT-EX510 manuel d'utilisation

Thank you for purchasing this Panasonic product. ■ This manual is intended for products manufactured from Jun. 2014 and beyond. ■ This manual is common to all the models regardless of sufxes of the Model No. z Without L : The standard zoom lens supplied With L : The lens sold separately ■ Before operating this product, please read the inst[...]

2 - ENGLISH Read this rst! Read this rst! W ARNING: THIS APP ARA TUS MUST BE EARTHED. W ARNING: T o prevent damage which may result in re or shock hazard, do not expose this appliance to rain or moisture. This device is not intended for use in the direct eld of view at visual display workplaces. T o avoid incommoding reexions at visu[...]

ENGLISH - 3 Read this rst! CAUTION (North/Middle/South America) Power Supply: This Projector is designed to operate on 100 V - 240 V , 50 Hz/60 Hz AC, house current only . CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V . If you need to use higher voltages than this,[...]

4 - ENGLISH Read this rst! FCC Notice (USA) V erication Model Number: PT -EZ580 / PT -EZ580L / PT -EW640 / PT -EW640L / PT -EX610 / PT -EX610L PT -EW540 / PT -EW540L / PT -EX510 / PT -EX510L T rade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: T wo Riverfront Plaza, Newark, NJ 07102-5490 General Contact: h[...]

ENGLISH - 5 Read this rst! IMPORT ANT : THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY , PLEASE READ THE FOLLOWING TEXT CAREFULL Y . This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has [...]

6 - ENGLISH Read this rst! W ARNING: r PO WER The wall outlet or the circuit breaker shall b e installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately . Continued use of the projector in these conditions will result in re or electric shock. f If f[...]

ENGLISH - 7 Read this rst! W ARNING: Do not cover the air intake/exhaust ports. Doing so will cause the projector to overheat, which can cause re or damage to the projector . f Do not place the projector in narrow , badly ventilated places. f Do not place the projector on cloth or papers, as these materials could be drawn into the air intake [...]

8 - ENGLISH Read this rst! W ARNING: r ACCESSORI ES Do not use or handle the batteries improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re. f Do not use unspecied batteries. f Do not use chargeable batteries. f Do not disassemble dry cell batteries. f Do not he[...]

ENGLISH - 9 Read this rst! CAUTION: r PO WER When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result. When not using the projector for an extended period of time, disconnect the power [...]

10 - ENGLISH Read this rst! CAUTION: r MA INTENANCE Do not attach the air lter unit while it is wet. Doing so may result in electric shock or malfunctions. f After you clean the air lter units, dry them thoroughly before reattaching them. Ask your dealer about cleaning inside the projector once a year . Continuous use while dust is accumul[...]

ENGLISH - 1 1 Read this rst! Brazil Only Brasil Apenas r Manuseio de ba teria s usada s BRASIL Após o uso, as pilhas e/ou baterias deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa destinad[...]

12 - ENGLISH r T rademarks f Windows, Windows Vista, and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. f Mac, Mac OS, OS X, and Safari are trademarks of Apple Inc., registered in the United States and other countries. f PJLink TM is a registered trademark or pending trad[...]

ENGLISH - 13 Features of the Projector High luminance and high contrast ▶ A high luminance *1 and a high contrast *2 (Except for PT -EW540, PT -EX510) are achieved by means of a unique optical system and lamp drive system. *1 6 200 lm for PT -EX610, 5 800 lm for PT -EW640, 5 400 lm for PT -EZ580, 5 300 lm for PT -EX510 and 5 000 lm for the PT -EW[...]

14 - ENGLISH Contents Contents Read this rst! 2 Chapter 1 Preparation Precautions for use 17 Cautions when transporting 17 Cautions when installing 17 Security 1 9 DIGIT AL LINK 1 9 Cautions on use 1 9 Disposal 20 Accessories 21 Optional accessories 22 About your projector 2 3 Remote control 23 Projector body 24 Using the remote control 2 7 Inse[...]

ENGLISH - 15 Contents [ADV ANCED MENU] menu 7 2 [DIGIT AL CINEMA REALITY] 72 [BLANKING] 72 [INPUT RESOLUTION] 73 [CLAMP POSITION] 73 [RASTER POSITION] 73 [DISPLA Y LANGUAGE] menu 74 Changing the display language 74 [DISPLA Y OPTION] menu 7 5 [COLOR ADJUSTMENT] 7 5 [COLOR CORRECTION] 7 5 [SCREEN SETTING] 76 [AUTO SIGNAL] 76 [AUTO SETUP] 76 [RGB IN] [...]

16 - ENGLISH Chapter 1 Preparation This chapter describes things you need to know or check before using the projector .[...]

Chapter 1   Preparation — Precautions for use ENGLISH - 17 Precautions for use Cautions when transporting f If you purchased the projector with the standard zoom lens, remove the lens cushion before use, and store it for the future use. When transporting the projector , move the lens to the home position and attach the lens cushion and the lens[...]

Chapter 1   Preparation — Precautions for use 18 - ENGLISH r Projection Lens Be sure to use the standard zoom lens (for high brightness) supplied with the projector or the specied Projection Lens (optional). The standard zoom lens supplied with PT -EZ570 series, PT -EW630 series, PT -EW530 series, PT -EX600 series, PT -EX500 series is dif fe[...]

Chapter 1   Preparation — Precautions for use ENGLISH - 19 f Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the projector . +15° - 15° 100 mm (4") or longer 500 mm (20") or longer 1 000 mm (40") or longer 1 000 mm (40") or longer f Do not install [...]

Chapter 1   Preparation — Precautions for use 20 - ENGLISH r LCD panel f The LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residual image may remain on the LCD panel. Note that t[...]

Chapter 1   Preparation — Precautions for use ENGLISH - 21 Accessories Make sure that the following accessories are provided with your projector . Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit <1> Power cord (TXFSX01RXQZ) (TXFSX01RWDZ) (TXFSX01RXRZ) Lens hole cover <1> (Only lens op[...]

Chapter 1   Preparation — Precautions for use 22 - ENGLISH Software Multi Projector Monitoring & Control Software (Windows) This software allows you to monitor and control multiple projectors connected to the LAN. Logo T ransfer Software (Windows) This software allows you to transfer original images, such as company logos to be displayed wh[...]

Chapter 1   Preparation — About your projector ENGLISH - 23 About your projector Remote control 1 3 2 4 5 8 7 6 6 9 10 16 17 18 19 15 11 13 20 22 21 24 23 12 14 25 26 Front To p Bottom 12 1 Power standby < v > button Sets the projector to the state where the projector is switched off (standby mode) when the <MAIN POWER> switch on th[...]

Chapter 1   Preparation — About your projector 24 - ENGLISH Attention f Do not drop the remote control. f Avoid contact with liquids or moisture. f Do not attempt to modify or disassemble the remote control. f Please observe the following contents that are described on the back of the remote control unit (see the right picture). 1. Do not use a[...]

Chapter 1   Preparation — About your projector ENGLISH - 25 13 Connecting terminals ( x page 26) 14 Security slot This security slot is compatible with the Kensington security cables. 15 Air intake port 16 Air lter cover The air lter unit is inside. 17 Control panel ( x page 25) 20 21 18 19 Projection direction Bottom To p 18 Burglar hook[...]

Chapter 1   Preparation — About your projector 26 - ENGLISH r Connecting terminals 1 2 3 4 5 6 7 8 9 11 10 12 13 1 <DIGIT AL LINK/LAN> terminal/<LAN> terminal (For PT -EZ580, PT -EW640 and PT -EX610) This is the LAN terminal to connect to the network. This is also used when connecting a device for transmitting video and audio signal[...]

Chapter 1   Preparation — Using the remote control ENGLISH - 27 Using the remote control Inserting and removing the batteries (ii) (i) Fig. 1 Fig. 2 1) Open the cover . (Fig. 1) 2) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order . Setting the ID numbe[...]

Chapter 1   Preparation — Using the remote control 28 - ENGLISH Connecting to the projector with a cable When controlling the projector by wired remote control, connect the <REMOTE 1 IN> terminal on the projector to the remote control wired terminal on the remote control by a commercial M3 stereo mini plug cable. The remote control is eff[...]

ENGLISH - 29 Chapter 2 Getting Started This chapter describes things you need to do before using the projector such as the setup and connections.[...]

Chapter 2   Getting Started — Setting up 30 - ENGLISH Setting up Installation mode There are four ways to set up the projector . Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] ( x page 86) depending on the installation method. Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear (Using the tra[...]

Chapter 2   Getting Started — Setting up ENGLISH - 31 Projected image size and throw distance Refer to the projected image size and projection distance shown below to install the projector . The image size and image position can be adjusted in accordance with the screen size and screen position. SD L (L W/L T) L1 L1 L (L W/L T) SW SH H SH SW Pr[...]

Chapter 2   Getting Started — Setting up 32 - ENGLISH Projection distance by Projection Lens A ±5 % error in listed projection distances may occur . In addition, when [KEYSTONE] is used, distance is corrected to become smaller than the specied screen size. For PT -EZ580 r When the screen aspect ratio is 16:10 (Unit: m) Lens type Standard zo[...]

Chapter 2   Getting Started — Setting up ENGLISH - 33 r When the screen aspect ratio is 4:3 (Unit: m) Lens type Standard zoom lens Optional lens Height position (H) *2 Fixed- focus lens Short focus zoom lens Long focus zoom lens Ultra long focus zoom lens Projection Lens Model No. — ET -EL W21 ET -EL W20 ET -EL T20 ET -EL T21 Standard zoom le[...]

Chapter 2   Getting Started — Setting up 34 - ENGLISH r When the screen aspect ratio is 16:9 (Unit: m) Lens type Standard zoom lens Optional lens Height position (H) *2 Fixed- focus lens Short focus zoom lens Long focus zoom lens Ultra long focus zoom lens Projection Lens Model No. — ET -EL W21 ET -EL W20 ET -EL T20 ET -EL T21 Standard zoom l[...]

Chapter 2   Getting Started — Setting up ENGLISH - 35 For PT -EX610 and PT -EX510 r When the screen aspect ratio is 4:3 (Unit: m) Lens type Standard zoom lens Optional lens Height position (H) *2 Fixed- focus lens Short focus zoom lens Long focus zoom lens Ultra long focus zoom lens Projection Lens Model No. — ET -EL W21 ET -EL W20 ET -EL T20[...]

Chapter 2   Getting Started — Setting up 36 - ENGLISH Formula to calculate projection distance per Projection Lens T o use a screen size not listed in this manual, check the screen size SD (m) and use the respective formula to calculate projection distance. The unit of all the formulae is m. (V alues obtained by the following calculation formul[...]

Chapter 2   Getting Started — Setting up ENGLISH - 37 Lens type Projection Lens Model No. Aspect ratio Projection distance (L) formula Long focus zoom lens ET -EL T20 16:10 Min. (L W) L = 2.3952 x SD - 0.1 139 Max. (L T) L = 3.9041 x SD - 0.1 128 16:9 Min. (L W) L = 2.4617 x SD - 0.1 139 Max. (L T) L = 4.0126 x SD - 0.1 128 4:3 Min. (L W) L = 2[...]

Chapter 2   Getting Started — Removing/attaching the Projection Lens 38 - ENGLISH Removing/attaching the Projection Lens Removing and attaching procedures of the Projection Lens are same for both standard zoom lens and optional lens. Move the lens to the home position before replacing or removing the Projection Lens. ( x page 50) Attention f Re[...]

Chapter 2   Getting Started — Connecting ENGLISH - 39 Connecting Before connecting f Before connecting, carefully read the operating instructions for the external device to be connected. f T urn off the power of all devices before connecting cables. f T ake note of the following points before connecting the cables. Failure to do so may result i[...]

Chapter 2   Getting Started — Connecting 40 - ENGLISH <DisplayPort IN> terminal pin assignments and signal names (Only for PT -EZ580, PT -EW640 and PT -EX610) Outside view Pin No. Signal name Pin No. Signal name Even-numbered pins of (2) to (20) (1) (19) (2) (20) Odd-numbered pins of (1) to (19) (1) MainLane - 3 (1 1) GND (2) GND (12) Mai[...]

Chapter 2   Getting Started — Connecting ENGLISH - 41 Note f When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLA Y OPTION] menu → [DVI-D IN] → [EDID]. f The <DVI-D IN> terminal can be connected to HDMI- or DVI-D-compliant devices. However , images may not appear or may not be [...]

Chapter 2   Getting Started — Connecting 42 - ENGLISH Connecting example: T wisted-pair-cable transmitter (Only for PT -EZ580, PT -EW640 and PT -EX610) T wisted-pair-cable transmitters such as the optional Digital Interface Box (Model No.: ET -YFB100G) use twisted-pair-cables to transmit input images, audio, Ethernet, and serial control signals[...]

ENGLISH - 43 Chapter 3 Basic Operations This chapter describes basic operations to start with.[...]

Chapter 3   Basic Operations — Switching on/off the projector 44 - ENGLISH Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely xed to the projector body to prevent it from being removed easily . Conrm that the <MAIN POWER> switch is on the <OFF> side before connecting the[...]

Chapter 3   Basic Operations — Switching on/off the projector ENGLISH - 45 Note f While the power indicator <ON (G)/ST ANDBY (R)> is lit in orange, the fan is running to cool the projector . f For about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators do not light up even if the [...]

Chapter 3   Basic Operations — Switching on/off the projector 46 - ENGLISH Initial setting (display language) Select the language to show on the screen. After completed the initial setting, you can change the display language from the [DISPLA Y LANGUAGE] menu. 1) Press as to select the display language. ENTER 1/4 Please select DISPLA Y LANGUAGE[...]

Chapter 3   Basic Operations — Switching on/off the projector ENGLISH - 47 Note f The above initial setting screen is the one displayed when the projector is switched on for the rst time after purchase. When [ALL USER DA T A] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [ST ANDBY MODE] before execution is displa[...]

Chapter 3   Basic Operations — Switching on/off the projector 48 - ENGLISH 6) If the input signal is an RGB signal, press the <AUT O SETUP> button. 7) Press the <ZOOM> button to adjust the size of the image to match the screen. 8) Press the <FOCUS> button again to adjust the focus. 9) Press the <ZOOM> button again to adj[...]

Chapter 3   Basic Operations — Projecting ENGLISH - 49 Projecting Check the attachment of the Projection Lens ( x page 38) , external device connection ( x page 39) , power cord connection ( x page 44), and switch on the projector ( x page 45) to start projecting. Select the image for projection, and adjust appearance of the projected image. Se[...]

Chapter 3   Basic Operations — Projecting 50 - ENGLISH Moving the lens to the home position T o move the lens to the home position, perform the following procedure. 1) While the [SHIFT] adjustment screen is displayed, press the <DEF AUL T> button on the remote control. f The [HOME POSITION] screen is displayed. LENS HOME POSITION EXECUTE [...]

Chapter 3   Basic Operations — Operating with the remote control ENGLISH - 51 Operating with the remote control For PT -EZ580, PT -EW640 and PT -EX610 For PT -EW540 and PT -EX510 Switching the input The input for projection can be switched. button 1) Press the input selection (<RGB1/2>, <DIGIT AL LINK>, <DVI-D>, <VIDEO>,[...]

Chapter 3   Basic Operations — Operating with the remote control 52 - ENGLISH 2) Press the <SHUTTER> button again. f The image and audio reappear . *<A V MUTE> button (Only for PT -EW540 and PT -EX510) button 1) Press the <A V MUTE> button. f The image and audio disappear . f This operation can be also performed using the <[...]

Chapter 3   Basic Operations — Operating with the remote control ENGLISH - 53 Note f [FREEZE] is displayed on the screen when video is paused. Using the on-screen display function T urn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display , such as the menu or the input terminal name. but[...]

Chapter 3   Basic Operations — Operating with the remote control 54 - ENGLISH f Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction. f Adjustment is required for each input signal. f Automatic adjustment can be canceled by pressing the <MENU> button during the automatic adjustment operation. [...]

Chapter 3   Basic Operations — Operating with the remote control ENGLISH - 55 Using the P IN P function Locate a separate, small sub screen in the main screen to project two images simultaneously . button 1) Press the <P IN P> button. f The setting will change each time you press the button. Note f Refer to the menu [P IN P] menu ( x page[...]

56 - ENGLISH Chapter 4 Settings This chapter describes the settings and adjustments you can make using the on-screen menu.[...]

Chapter 4   Settings — Menu navigation ENGLISH - 57 Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector . Navigating through the menu Operating procedure button 1) Press the <MENU> button on the remote control or control panel. f The [MAIN MENU] screen is displayed. MAIN MENU PICT[...]

Chapter 4   Settings — Menu navigation 58 - ENGLISH 4) Press as to select a sub-menu, and press qw or the <ENTER> button to change or adjust settings. f Some items will switch in order as follows each time you press qw . ABC f For some items, press qw to display an individual adjustment screen with a bar scale as shown below . 0 CONTRAST [...]

Chapter 4   Settings — Menu navigation ENGLISH - 59 Main menu item Page [TEST P A TTERN] 100 [SIGNAL LIST] 101 [SECURITY] 104 [NETWORK] 107 Sub-menu The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu. [PICTURE] Sub-menu item Factory default Page [PICTURE MODE] [ST ANDARD] 62 [CONTRAST] [0][...]

Chapter 4   Settings — Menu navigation 60 - ENGLISH [DISPLA Y LANGUAGE] Details ( x page 74) [DISPLA Y OPTION] Sub-menu item Factory default Page [COLOR ADJUSTMENT] [OFF] 75 [COLOR CORRECTION] [OFF] 75 [SCREEN SETTING] ― 76 [AUTO SIGNAL] [OFF] 76 [AUTO SETUP] ― 76 [RGB IN] ― 77 [DVI-D IN] ― 78 [HDMI IN] ― 78 [DIGIT AL LINK IN] *1 ― [...]

Chapter 4   Settings — Menu navigation ENGLISH - 61 [SIGNAL LIST] Details ( x page 101) [SECURITY] Sub-menu item Factory default Page [SECURITY P ASSWORD] [OFF] 104 [SECURITY P ASSWORD CHANGE] ― 104 [DISPLA Y SETTING] [OFF] 105 [TEXT CHANGE] ― 105 [MENU LOCK] [OFF] 105 [MENU LOCK P ASSWORD] ― 105 [CONTROL DEVICE SETUP] ― 106 [NETWORK] S[...]

Chapter 4   Settings — [PICTURE] menu 62 - ENGLISH [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to adjust. [PICTURE MODE] Y ou can switch to the de[...]

Chapter 4   Settings — [PICTURE] menu ENGLISH - 63 [BRIGHTNESS] Y ou can adjust the dark (black) part of the projected image. 1) Press as to select [BRIGHTNESS]. 2) Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed. 3) Press qw to adjust the level. Operation Adjustment Range of adjustment Press t[...]

Chapter 4   Settings — [PICTURE] menu 64 - ENGLISH Note f When [COLOR ADJUSTMENT] ( x page 75) is set to other than [OFF], [COLOR TEMPERA TURE] is xed to [USER]. Adjusting desired white balance 1) Press as to select [COLOR TEMPERA TURE]. 2) Press qw or the <ENTER> button. f The [COLOR TEMPERA TURE] individual adjustment screen is displ[...]

Chapter 4   Settings — [PICTURE] menu ENGLISH - 65 Note f When a name is changed, display of [USER] is also changed. [GAMMA] Y ou can adjust contrast balance. 1) Press as to select [GAMMA]. 2) Press qw or the <ENTER> button. f The [GAMMA] individual adjustment screen is displayed. 3) Press qw to adjust the level. Operation Adjustment Rang[...]

Chapter 4   Settings — [PICTURE] menu 66 - ENGLISH 3) Press qw to switch the item. f The items will switch each time you press the button. [OFF] No correction. [ON] Automatically corrects the aperture. [DA YLIGHT VIEW] Y ou can correct the image to the optimal vividness even if it is projected under a bright light. 1) Press as to select [DA YLI[...]

Chapter 4   Settings — [PICTURE] menu ENGLISH - 67 sRGB-compliant video sRGB is an international standard (IEC61966-2-1) for color reproduction dened by IEC (International Electrotechnical Commission). Set according to the following steps to reproduce more faithful, sRGB compliant colors. 1) Set [COLOR ADJUSTMENT] to [OFF]. f Refer to [COLOR[...]

Chapter 4   Settings — [POSITION] menu 68 - ENGLISH [POSITION] menu On the menu screen, select [POSITION] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to adjust. [SHIFT] Move the image position verti[...]

Chapter 4   Settings — [POSITION] menu ENGLISH - 69 [VID AUTO] *1 The projector identies the video ID (VID) embedded in the video signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is ef fective for NTSC signals. [AUTO] *2 The projector identies the video ID (VID) embedded in the[...]

Chapter 4   Settings — [POSITION] menu 70 - ENGLISH When [ASPECT] is set to [NORMAL] 1) Press as to select [ZOOM]. 2) Press the <ENTER> button. f The [ZOOM] screen is displayed. 3) Press as to select [MODE]. 4) Press qw to switch the item. [INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T]. [FULL] Enlarges or r[...]

Chapter 4   Settings — [POSITION] menu ENGLISH - 71 [KEYSTONE] [VERTICAL] [HORIZONT AL] Setting [CORNER CORRECTION] 1) Press as to select [KEYSTONE]. 2) Press the <ENTER> button. 3) Press as to select [CORNER CORRECTION]. 4) Press the <ENTER> button. f The [CORNER CORRECTION] screen is displayed. 5) Press as to select the item to ad[...]

Chapter 4   Settings — [ADV ANCED MENU] menu 72 - ENGLISH [ADV ANCED MENU] menu On the menu screen, select [ADV ANCED MENU] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to adjust. [DIGIT AL CINEMA REA[...]

Chapter 4   Settings — [ADV ANCED MENU] menu ENGLISH - 73 Blanking correction Item Operation Adjustment Range of adjustment Left side of the screen [LEFT] Press the w button. The blanking zone moves to the right. PT -EZ580: Left to right 0 - 959 PT -EW640 PT -EW540: Left to right 0 - 639 PT -EX610 PT -EX510: Left to right 0 - 51 1 Press the q b[...]

Chapter 4   Settings — [DISPLA Y LANGUAGE] menu 74 - ENGLISH [DISPLA Y LANGUAGE] menu On the menu screen, select [DISPLA Y LANGUAGE] from the main menu, and display the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f Press as to select a language, and press the <ENTER> button to s[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu ENGLISH - 75 [DISPLA Y OPTION] menu On the menu screen, select [DISPLA Y OPTION] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to set. [COLOR ADJUSTMENT] C[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu 76 - ENGLISH [OFF] Standard setting [USER] For each of the following four signal formats: VIDEO, Y/C, RGB, and YP B P R /YC B C R , six colors of red, green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button to set the details. Adjustment is possible with[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu ENGLISH - 77 [WIDE] Select when an image aspect ratio is a wide-screen signal, which does not meet the [DEF AUL T] settings. [USER] Select when receiving a signal with a special horizontal resolution (number of display dots). f When [DEF AUL T] or [WIDE] is selected, proceed to Step 7) . f When [USE[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu 78 - ENGLISH Setting [RGB2 INPUT SETTING] 1) Press as to select [RGB IN]. 2) Press the <ENTER> button. f The [RGB IN] screen is displayed. 3) Press as to select [RGB2 INPUT SETTING]. 4) Press qw to switch the item. f The items will switch each time you press the button. [RGB/YP B P R ] Select [...]

Chapter 4   Settings — [DISPLA Y OPTION] menu ENGLISH - 79 [64-940] Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is connected to the <HDMI IN> terminal. [0-1023] Select when the DVI-D terminal output of an external device (such as a computer) is connected to the <HDMI IN> terminal via a [...]

Chapter 4   Settings — [DISPLA Y OPTION] menu 80 - ENGLISH 2) Press the <ENTER> button. f The [ON-SCREEN DISPLA Y] screen is displayed. 3) Press as to select [OSD POSITION]. 4) Press qw to switch the item. f The items will switch each time you press the button. [2] Sets to the center left of the screen. [3] Sets to the bottom left of the [...]

Chapter 4   Settings — [DISPLA Y OPTION] menu ENGLISH - 81 2) Press the <ENTER> button. f The [ON-SCREEN DISPLA Y] screen is displayed. 3) Press as to select [INPUT GUIDE]. 4) Press qw to switch the item. f The items will switch each time you press the button. [ON] Displays the input guide. [OFF] Hides the input guide. Setting [W ARNING M[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu 82 - ENGLISH Note f Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed depending on the connected devices or contents being played back. f [CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YC B C R sign[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu ENGLISH - 83 2) Press the <ENTER> button. f The [SHUTTER SETTING] screen is displayed. 3) Press as to select [SHUT -OFF]. 4) Press qw to switch the item. [KEEP CURRENT ST A TE] When the projector is switched off, the projector turns into standby with the shutter status as is. [OPEN] When the p[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu 84 - ENGLISH 4) Press the <MENU> button three times to clear . f The start time is displayed at the bottom right of the projected image. Note f Presentation timer operations are also possible by the <P-TIMER> button on the remote control. ( x page 53) f The security message set in the [S[...]

Chapter 4   Settings — [DISPLA Y OPTION] menu ENGLISH - 85 Note f The magnication can be adjusted in increments of 0.1 between 1.0x and 2.0x. For some computer signals, the magnication can be adjusted up to 3.0x. f The digital zoom function is canceled if the <MENU> button is pressed during a digital zoom. f The digital zoom functio[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu 86 - ENGLISH [PROJECT OR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to set. [PROJECTOR ID] The [...]

Chapter 4   Settings — [PROJECTOR SETUP] menu ENGLISH - 87 [ECO MANAGEMENT] This function optimizes lamp power according to the operating status to reduce power consumption. Setting [LAMP POWER] Switch the brightness of the lamp according to the operating environment of the projector or the purpose. 1) Press as to select [ECO MANAGEMENT]. 2) Pr[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu 88 - ENGLISH Setting [NO SIGNAL SHUT -OFF] A function that automatically switches the power of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set. 1) Press as to select [ECO MANAGEMENT]. 2) Press the <ENTER> button[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu ENGLISH - 89 2) Press qw to select [ON], and press the <ENTER> button. f The [SCHEDULE] screen is displayed. 3) Select and assign program to each day of week. f Press as to select the day of week, and press qw to select a program number . f Y ou can set the program from No.1 to No.7. “- - -?[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu 90 - ENGLISH *3 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET -YFB100G)) is connected to the projector , its input name is reected from [INPUT1] to [INPUT10] automatically . If an item where the input name is not reected is selecte[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu ENGLISH - 91 [PROJECTOR] Use the <SERIAL IN> terminal of the projector to execute RS-232C communication. [DIGIT AL INTERF ACE BOX] Executes RS-232C communication via the optional Digital Interface Box (Model No.: ET -YFB100G) and the <DIGIT AL LINK/LAN> terminal. 5) Press as to select [B[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu 92 - ENGLISH Note (Only for PT -EZ580, PT -EW640 and PT -EX610) f When [INPUT SELECT] is set to [DIGIT AL INTERF ACE BOX], communication using that serial terminal is available only when the corresponding device (such as the optional Digital Interface Box (Model No.: ET -YFB100G)) is connected to th[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu ENGLISH - 93 Adjusting the left to right audio balance 1) Press as to select [AUDIO SETTING]. 2) Press the <ENTER> button. f The [AUDIO SETTING] screen is displayed. 3) Press as to select [BALANCE]. 4) Press qw to adjust the level. Operation Adjustment Range of adjustment Press w . Increases t[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu 94 - ENGLISH [OFF] Audio is not output. [ON] Audio is output. Setting audio input from a connected device 1) Press as to select [AUDIO SETTING]. 2) Press the <ENTER> button. f The [AUDIO SETTING] screen is displayed. 3) Press as to select the audio input. 4) Press qw to switch the item. f The [...]

Chapter 4   Settings — [PROJECTOR SETUP] menu ENGLISH - 95 [NUMBER OF REGISTERED SIGNAL] Displays the number of registered signals. [REMOTE2 ST A TUS] Displays the control status of the REMOTE2. [SIGNAL INFORMA TION] [MEMOR Y NO.] Displays the memory number of the input signal. [INPUT] Displays the input terminal currently selected. [SIGNAL NAM[...]

Chapter 4   Settings — [PROJECTOR SETUP] menu 96 - ENGLISH 2) Press the <ENTER> button. f The [DA TE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK]. 4) Press the <ENTER> button. f The [ADJUST CLOCK] screen is displayed. 5) Press as to select [NTP SYNCHRONIZA TION], and press qw to change the setting to [ON]. 6) [...]

Chapter 4   Settings — [PROJECTOR SETUP] menu ENGLISH - 97 [REGISTERED SIGNAL] Deletes all the setting values saved for each input signal. T o delete only a part of a registered signal, perform the procedure described in “Deleting the registered signal” ( x page 102). [NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory d[...]

Chapter 4   Settings — [P IN P] menu 98 - ENGLISH [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to set. Using P IN P function Locate a separate, small[...]

Chapter 4   Settings — [P IN P] menu ENGLISH - 99 14) If [CLOCK PHASE] is selected in Step 8) , press qw to make adjustment. 15) Press as to select [FRAME LOCK]. 16) Press qw to switch the item. [MAIN WINDOW] Set frame lock to the input signal set in the main window . [SUB WINDOW] Set frame lock to the input signal set in the sub window . 17) P[...]

Chapter 4   Settings — [TEST P A TTERN] menu 100 - ENGLISH [TEST P A TTERN] menu On the menu screen, select [TEST P A TTERN] from the main menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f Press qw to switch. [TEST P A TTERN] Display the test pattern built-in to the projector . Settings of pos[...]

Chapter 4   Settings — [SIGNAL LIST] menu ENGLISH - 101 [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. r Registered signal details A1 (1-2) When the address number (A1, A2, ... L7, L8) signal is registered Sub memory nu[...]

Chapter 4   Settings — [SIGNAL LIST] menu 102 - ENGLISH 3) Press the <ENTER> button. f The [REGISTERED SIGNAL SETUP] screen is displayed. 4) Press as to select [LOCK-IN RANGE]. 5) Press qw to switch the item. f The items will switch each time you press the button. [NARROW] Select in most cases. [WIDE] Widens the lock-in range. Note f Swit[...]

Chapter 4   Settings — [SIGNAL LIST] menu ENGLISH - 103 Sub memory The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source. Use this function when you need to adjust the picture quality such as switch[...]

Chapter 4   Settings — [SECURITY] menu 104 - ENGLISH [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f When the projector is used for the rst time Initial password: Press awsqawsq in o[...]

Chapter 4   Settings — [SECURITY] menu ENGLISH - 105 6) Press the <ENTER> button. Note f The entered password is displayed with*marks on the screen. f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. Consult your dealer for the initialization method[...]

Chapter 4   Settings — [SECURITY] menu 106 - ENGLISH Attention f The initial password is “AAAA” by the factory default or when [ALL USER DA T A] in [INITIALIZE] ( x page 96) is executed. f Change the password periodically that is hard to guess. [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote c[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 107 [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. f After selecting the item, press asqw to set. [DIGIT AL LINK MODE] (Only for PT -EZ580, [...]

Chapter 4   Settings — [NETWORK] menu 108 - ENGLISH 6) Press the <ENTER> button. 7) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button. Note f The projector does not support 10BaseT Full/Half. When the projector is connected to a twisted-pair-cable transmitter 1) Press as to select [DIGI[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 109 [SUBNET MASK] Enter the subnet mask when not using a DHCP server . [DEF AUL T GA TEW A Y] Enter the default gateway address when not using a DHCP server . [STORE] Save the current network settings. 4) Press as to select [STORE], and press the <ENTER> button. 5) When the confirmation scre[...]

Chapter 4   Settings — [NETWORK] menu 1 10 - ENGLISH Network connections The projector has a network function, and the following operations are available from the computer using the web control. f Setting and adjustment of the projector f Display of the projector status f Sending of E-mail messages when there is a problem with the projector The[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 1 1 1 f For the LAN cable between a twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria: g Compatible with CA T5e or higher g Shielded type (including connectors) g Straight-through g Single wire f The maximum transmission distance between the twisted-p[...]

Chapter 4   Settings — [NETWORK] menu 1 12 - ENGLISH f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers. f Change the password rst. ( x page 121) f The administrator rights allow use of all functions. The user rights allow use of only the follow[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 1 13 13 [AROUND LAMP TEMPERA TURE] Displays the status of the temperature around the lamp of the projector . 14 [LAMP RUNTIME] Displays the runtime of the lamps (converted value). 15 [SELF TEST] Displays the self-diagnosis information. 16 [PROJECTOR RUNTIME] Displays the runtime of the projector .[...]

Chapter 4   Settings — [NETWORK] menu 1 14 - ENGLISH [Network status] page Click [Status] → [Network status]. The current network setting status is displayed. [Access error] page Click [Status] → [Access error]. The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names [...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 1 15 [Basic control] page Click [Projector control] → [Basic control]. 1 2 4 5 3 6 1 [INPUT] *1 Switches the input signal. 2 [VOLUME] Adjusts the volume. 3 [PICTURE MODE] Switches the picture mode. 4 [SHUTTER] *2 Switches the setting whether to use the shutter function (closing/opening of the sh[...]

Chapter 4   Settings — [NETWORK] menu 1 16 - ENGLISH [Network cong] page Click [Detailed set up] → [Network cong]. f Click [Network cong] to display the [CAUTION!] screen. f Click the [Next] button to display the current settings. f Click the [Change] button to display the setting change screen. 1 2 3 4 5 6 7 8 1 [PROJECTOR NAME] Ent[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 1 17 [Adjust clock] page Click [Detailed set up] → [Adjust clock]. 1 2 3 4 5 6 7 1 [Timezone] Selects the time zone. 2 [Set time zone] Updates the time zone setting. 3 [NTP SYNCHRONIZA TION] Sets to [ON] to adjust the date and time automatically . 4 [NTP SER VER NAME] Enter the IP address or ser[...]

Chapter 4   Settings — [NETWORK] menu 1 18 - ENGLISH [E-mail set up] page When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. 1 2 3 4 5 6 1 [ENABLE] Select [Enable] to use the E-mail function. 2 [SMTP SER VER NA[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 1 19 [Authentication set up] page Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail. Click [Detailed set up] → [Authentication set up]. 1 2 3 4 5 6 7 8 1 [Auth] Selects the authentication method specied by your Internet service provider[...]

Chapter 4   Settings — [NETWORK] menu 120 - ENGLISH Contents of E-mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. == = Panas onic projec t or r eport ( CO NF I G URE ) == = P rojec t or T y pe : E Z 580 S erial No : S N9250024 ----- E-mai l se t u p d ata ----- T E[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 121 Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. == = Panas onic projec t or r eport ( E RRO R ) === P rojec t or T y pe : E Z 580 S erial No : S N9250024 ----- ch eck syst e m ----- M AI N CP U B US [ O K ] FA N [ OK ] I N T AKE AIR TEMPERA T U [...]

Chapter 4   Settings — [NETWORK] menu 122 - ENGLISH [Administrator] account 1 2 3 4 1 [Account] Displays the account to change. 2 [Current] [User name]: Enter the user name before the change. [Password]: Enter the current password. 3 [New] [User name]: Enter the desired new user name. (Up to 16 characters in single byte) [Password]: Enter the d[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 123 [Change password] (For user rights) Only the change of password is enabled under the user rights. 1 2 4 3 1 [Old Password] Enter the current password. 2 [New Password] Enter the desired new password. (Up to 16 characters in single byte) 3 [Retype] Enter the desired new password again. 4 [OK] D[...]

Chapter 4   Settings — [NETWORK] menu 124 - ENGLISH [T ools] page Click [T ools] on the control page. 1 2 3 4 5 1 [Control System] Set the information required for communicating with the controller to be connected with the projector . 2 [User Password] Set the user rights password for the Crestron Connected TM control page. 3 [Admin Password] S[...]

Chapter 4   Settings — [NETWORK] menu ENGLISH - 125 [Help] page Click [Help] on the control page. The [Help Desk] window is displayed. 1 1 [Help Desk] Send/receive messages to/from an administrator who uses Crestron Connected TM .[...]

126 - ENGLISH Chapter 5 Maintenance This chapter describes methods of inspection when there are problems, maintenance, and replacement of the units.[...]

Chapter 5   Maintenance — Lamp/temperature/lter indicators ENGLISH - 127 Lamp/temperature/lter indicators When an indicator lights up If a problem should occur inside the projector , the lamp indicator <LAMP>, the temperature indicator <TEMP>, and the lter indicator <FIL TER> will inform you by lighting or ashing. [...]

Chapter 5   Maintenance — Lamp/temperature/lter indicators 128 - ENGLISH T emperature indicator <TEMP> Indicator status Lighting in red Flashing in red (2 times) Flashing in red (3 times) Status Internal temperature is high (warning). Internal temperature is high (standby status). The cooling fan has stopped. Cause f Is the air intake/[...]

Chapter 5   Maintenance — Maintenance/replacement ENGLISH - 129 Maintenance/replacement Before performing maintenance/replacement f Make sure to turn off the power before maintaining the projector or replacing the unit. ( x pages 44, 48) f When switching off the projector , make sure to follow the procedures in “Switching of f the projector?[...]

Chapter 5   Maintenance — Maintenance/replacement 130 - ENGLISH Cleaning the air lter unit Remove the air lter unit beforehand according to the previously described procedure in “Removing the air lter unit” . Fig. 1 Fig. 2 1) W ash the air filter unit. (Fig. 1) i) Soak the air filter unit in cold or warm water and then lightly rins[...]

Chapter 5   Maintenance — Maintenance/replacement ENGLISH - 131 Replacing the unit Lamp unit The lamp unit is a consumable component. Refer to “When to replace the lamp unit” ( x page 131) for details about the replacement cycle. When purchasing the optional Replacement Lamp Unit (Model No.: ET -LAE300), consult your dealer . It is recommen[...]

Chapter 5   Maintenance — Maintenance/replacement 132 - ENGLISH f If the lamp unit is not installed properly , remove it and then push it in slowly . Pushing it in quickly or forcibly may break the connector . Fig. 1 Fig. 2 Lamp unit fixing screws Lamp cover fixing screw Lamp unit Handles Lamp cover 1) Set the <MAIN POWER> switch to <O[...]

Chapter 5   Maintenance — Maintenance/replacement ENGLISH - 133 Note f If you use the projector without attaching the air lter unit, the lter indicator <FIL TER> ashes in red and the message appears on the projected image for approximately 30 seconds.[...]

Chapter 5   Maintenance — T roubleshooting 134 - ENGLISH T roubleshooting Review the following points. For details, see the corresponding pages. Problems Points to be checked Page Power does not turn on. f Is the power plug rmly inserted into the outlet? ― f Is the <MAIN POWER> switch set to <OFF>? 48 f Is the wall outlet suppl[...]

Chapter 5   Maintenance — T roubleshooting ENGLISH - 135 Problems Points to be checked Page Video from HDMI compatible device does not appear or it appears jumbled. f Is the HDMI cable connected securely? 39 f T urn off and on the power of the projector and the external device. ― f Is a signal which is not compatible with the projector being [...]

136 - ENGLISH Chapter 6 Appendix This chapter describes specications for the projector .[...]

Chapter 6   Appendix — T echnical information ENGLISH - 137 T echnical information PJLink protocol The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer . Control commands The following table lists the PJLink prot[...]

Chapter 6   Appendix — T echnical information 138 - ENGLISH PJLink security authentication The password used for PJLink is the same as that of the password set for web control. When using the projector without security authentication, do not set a password for web control. f For specications related to PJLink, refer to the website of Japan B[...]

Chapter 6   Appendix — T echnical information ENGLISH - 139 r Error response String Details T ermination symbol Message “ERR1” Undened control command (CR) 0x0d “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period “ERR4” T imeout or no-acceptable period “ERR5” Wrong data length “ERRA” Password misma[...]

Chapter 6   Appendix — T echnical information 140 - ENGLISH <SERIAL IN> terminal The <SERIAL IN> terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled from a computer . Connection LAN cable (straight) Communication cable (straight) D-Sub 9p (male) D-Sub 9p (female) DIGIT AL LINK DIG[...]

Chapter 6   Appendix — T echnical information ENGLISH - 141 Basic format T ransmission from the computer starts with STX, then the ID, command, parameter , and ETX are sent in this order . Add parameters according to the details of control. (2 bytes) 2 ID characters (2 bytes) Semi-colon (1 byte) Colon (1 byte) 3 command characters (3 bytes) Par[...]

Chapter 6   Appendix — T echnical information 142 - ENGLISH Cable specication 1 NC NC 1 2 2 3 3 4 NC NC 4 5 5 6 NC NC 6 7 7 8 8 9 NC NC 9 When connected to a computer Projector (<SERIAL IN> terminal) Computer (DTE specifications) Control command The following table lists the commands that can be used to control the projector using a co[...]

Chapter 6   Appendix — T echnical information ENGLISH - 143 r Projector control command (with sub command) Command Sub command Details Remark VXX LPWI1 Lamp power selection +00001=NORMAL,+00000=ECO, +00030=AUTO VXX RYCI2 RGB2 input setting +00000=RGB/YP B P R , +00001=Y/C, +00002=VIDEO r Lens control command Command Sub command Details Remark V[...]

Chapter 6   Appendix — T echnical information 144 - ENGLISH g Power < v / b > button on the control panel or the power on < b > button, power standby < v > button, <RGB1/2> button, <DVI-D> button, <VIDEO> button, <HDMI> button, <DIGIT AL LINK> button, <DisplayPort> button, <SHUTTER> bu[...]

Chapter 6   Appendix — T echnical information ENGLISH - 145 Sub window DVI-D HDMI DIGIT AL LINK *4 DisplayPort *4 Main window Still image *2 Movie *3 Still image *2 Movie *3 Still image *2 Movie *3 Still image *2 Movie *3 DisplayPort input *4 Still image signal *2 ― ― l l l l ― ― Movie-based signal *3 ― ― l a l a ― ― l : P IN P [...]

Chapter 6   Appendix — T echnical information 146 - ENGLISH List of compatible signals The following table species the video signals compatible with the projector . f Symbols that indicate formats are as follows. g V : VIDEO, Y/C g R: RGB g Y : YC B C R /YP B P R g D: DVI-D g H: HDMI g DP: DisplayPort (Only for PT -EZ580, PT -EW640 and PT -E[...]

Chapter 6   Appendix — T echnical information ENGLISH - 147 Mode Resolution (Dots) Scanning freq. Dot clock freq. (MHz) Format Plug and play *1 Horizontal (kHz) V ertical (Hz) RGB1 DVI-D HDMI DP EDID1 EDID2 EDID3 1280 x 720 1 280 x 720 37.1 49.8 60.5 R/D/H/DP ― ― ― ― ― ― 1 280 x 720 44.8 59.9 74.5 R/D/H/DP ― ― ― ― ― ― 1 [...]

Chapter 6   Appendix — T echnical information 148 - ENGLISH f If connecting the projector to a computer that uses an early-type chipset or graphics card compatible with DisplayPort, the projector or computer may not be operated properly when the signal output from DisplayPort on the computer is input to the projector . In such a case, switch of[...]

Chapter 6   Appendix — Specications ENGLISH - 149 Specications The specications of the projector are as follows. Power supply AC 100 V - 240 V , 50 Hz/60 Hz Power consumption PT -EZ580 510 W (5.9 A - 2.3 A) or less PT -EW640, PT -EX610 495 W (5.7 A - 2.2 A) or less PT -EW540, PT -EX510 485 W (5.6 A - 2.1 A) or less PT -EZ580, PT -EW640[...]

Chapter 6   Appendix — Specications 150 - ENGLISH Operating environment Operating environment temperature *1 0 °C (32 °F) - 45 °C (1 13 °F) Operating environment humidity 10 % - 80 % (No condensation) Remote control Power supply DC 3 V (AAA/R03/LR03 battery x 2) Operating range Within approx. 30 m (98'5") (when operated directl[...]

Chapter 6   Appendix — Specications ENGLISH - 151 r T erminal <RGB 1 IN> terminal 1 set, high-density D-Sub 15 p (female) RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible YP B[...]

Chapter 6   Appendix — Dimensions 152 - ENGLISH Dimensions Unit: mm 530 (20-7/8") 451 (17-3/4") 265 (10-7/16") 225.5 (8-7/8") 281.9 (11-3/32") 177 (6-31/32") 160 (6-5/16") 97 (3-13/16") 60 (2-3/8") 385 (15-5/32") * The above dimensions are obtained when the standard zoom lens is attached. * Dime[...]

Chapter 6   Appendix — Precautions for Ceiling Mount Bracket ENGLISH - 153 Precautions for Ceiling Mount Bracket f When installing the projector to a ceiling, be sure to use the specied optional Ceiling Mount Bracket as the following combinations:  ET -PKD120H (for High Ceilings) and ET -PKE300B (Projector Mount Bracket)  ET -PKD120S ([...]

Index 154 - ENGLISH A <AC IN> terminal 24, 44 Accessories 21 Adjusting adjustable feet 37 Adjusting the volume 52 [ADV ANCED MENU] 59 , 72 Air lter unit 129 Air lter unit compartment 132 [ASPECT] 68 <ASPECT> button Remote control 23 [AUDIO SETTING] 92 [AUTO SETUP] 76 <AUTO SETUP> button Remote control 23, 53 [AUTO SIGNAL] 76[...]

Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries[...]