Panasonic TH-65PF20U manuel d'utilisation

TH - 58PF20U TH- 65PF20U Model No. Operating Instructions High De nition Plasma Display English Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference.[...]

2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within [...]

3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8) Do not install near any heat sou[...]

4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit from your set, please r ead these Instructions befor e making any adjustments, and r etain them for future r efer ence. Retain your pur chase recei[...]

5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) CAUTION When using the Plasma Display Do not bring you[...]

7 Safety Precautions W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty , wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times[...]

+ - + - Ferrite core × 2 Use the Ferrite cores to comply with the EMC standard. (see page 61) Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity (+ and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Disposal of batteries [...]

9 1 2 Plug the AC cord into the display unit. Plug the AC cord until it clicks. Note: Make sure that the AC cord is locked on both the left and right sides. Connections When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’s Installation Manual for details on speaker installation. AC cord  xin[...]

10 VIDEO and COMPONENT / RGB IN connection , Y , P B , P R OUT P R P B Y AUDIO OUT R L VIDEO OUT AUDIO OUT R L Notes: • Change the “COMPONENT/RGB-IN select” setting in the “SETUP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 49) • Accepts only RGB signals with “SYNC ON[...]

11 HDMI connection DVI-D IN connection [Pin assignments and signal names] 19 3 1 4 2 18 Note: Additional equipment and HDMI cable shown are not supplied with this set. Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S Data2+ 11 T .M.D.S Clock Shield 2 T .M.D.S Data2 Shield 12 T .M.D.S Clock- 3 T .M.D.S Data2- 13 CEC 4 T .M.D.S Data1+ 14 Reserved ([...]

Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Stereo mini plug (M3) Audio Connect a cable which matches the audio output terminal on the computer . (Male) (Female) COMPUTER 12 PC Input T erminals connection Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 68), a[...]

6 7 8 9 1 3 4 52 COMPUTER RS-232C Straight cable D-sub 9p (Male) (Female) 13 Connections SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL ter[...]

INPUT MENU ENTER/ + / VOL - / 14 Power Indicator Remote Control Sensor Power ON / OFF Connecting the AC cord plug to the Plasma Display . Connecting the plug to the W all Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst. Press the Power switch on the Plasma Display to turn [...]

PC FULL NANODRIFT English (UK) Deutsch Français Italiano Español ENGLISH (US)  OSD LANGUAGE SET SELECT PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 99:99 DA Y MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 10:00 DA Y TUE LANDSCAPE PORTRAIT DISPLA Y ORIENT A TION 15[...]

INPUT MENU ENTER/ + / VOL - / INPUT MENU ENTER/ + / VOL - / 16 Selecting the input signal Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Outputs the sound as set in “Audio input select” in the Options menu.(see page 60) • Select to match the signals from the source connected to the component/RGB input term[...]

17 INPUT MENU ENTER/ + / VOL - / Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 24) INPUT button (Input signal selection) (see page 16) Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume[...]

18 Basic Controls Standby (ON / OFF) button The Plasma Display must  rst be plugged into the wall outlet and turned on at the power switch (see page 14). Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode. ACTION button Press to make selections. ASPECT button Press to[...]

INPUT MENU ENTER/ + / VOL - / 19 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 67). The aspect mode changes each time t[...]

20 Y ou can display two pictures, such as a video image and computer image, in a two-screen display . (Use the remote control for this operation. It cannot be performed with the buttons on the main unit.) MUL TI PIP SETUP Set the functions and mode for two-screen display in “MUL TI PIP SETUP” in the SET UP menu. (see page 46) Selecting the Disp[...]

21 MUL TI PIP Swapping Screens Each time this button is pressed, the main screen and sub screen are swapped. T wo screens (P AND P) Main screen Sub screen T wo screens (P OUT P) T wo screens (P IN P) During Blend PIP (Composite Screen Function) : A composite picture is displayed with the sub screen positioned over the main screen. For example, text[...]

22 MUL TI PIP Selecting the T arget Screen for Operations Each time this button is pressed, the target screen for operations changes. PC VIDEO PC VIDEO Main screen Sub screen Main screen input mode Sub screen input mode Operations on the main screen Operations on the sub screen Notes: • When operations are performed for the sub screen, the sub sc[...]

INPUT MENU ENTER/ + / VOL - / 2 EXIT 2 1 EXIT s 1 s 2 s 3 s 4 23 VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. [...]

24 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press to select. (Example: PICTURE menu) MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing PICTURE SOUND POS. /SIZE SET UP 2 Select the item. Select. Select. Press. 25 0 0 0 5 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTN[...]

Page 26-28 Page 42 Page 35-54 Overview Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. Page 29-33 Page 34 Page 29-30 1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLIS[...]

0 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V -POS 0 H-POS V -SIZE DOT CLOCK H-SIZE CLAMP POSITION CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 26 Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select the menu to adjust. Press to adjust the menu. Press to exit from adjust mode. Notes: • Adjustment details are memorized separately [...]

27 H-POS Adjust the horizontal position. V -POS Adjust the vertical position. H-SIZE Adjust the horizontal size. V -SIZE Adjust the vertical size. DOT CLOCK (During Component, RGB and PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimi[...]

28 While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) Adjusting POS. /SIZE 1:1 PIXEL MODE Adjusts the display size when 1 125i[...]

BLACK EXTENSION AGC GAMMA INPUT LEVEL ADV ANCED SETTINGS NORMAL NORMALIZE W/B LOW B W/B HIGH R W/B LOW R W/B LOW G W/B HIGH G W/B HIGH B 0 0 2.2 0 0 0 0 0 0 OFF 25 0 0 0 5 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENT ADV ANCED SETTINGS COLOR TEMP NORMAL OFF 29 PICTURE Adjustments 1 ADV ANC[...]

30 PICTURE Adjustments ADV ANCED SETTINGS Notes: • “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” input signal. • Y ou can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT , SHARPNESS) for each PICTURE MENU. • The setting details for ST ANDARD, DYNAMIC, CINEMA and MONITOR respectively are memorized [...]

18 0 0 0 3 PICTURE NORMAL NORMALIZE CINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENT ADV ANCED SETTINGS MEMORY SA VE COLOR TEMP NORMAL OFF MEMORY LOAD MEMORY EDIT 25 0 0 0 5 PICTURE NORMAL NORMALIZE CINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENT ADV ANCED SETTINGS COLOR TEMP NORMAL OFF 25 0 [...]

32 Follow these steps to save picture adjustment values as pro les. Note: When the settings are locked in “EXTENDED LIFE SETTINGS”, pro les cannot be saved. Picture Pro les Saving pro les 1 Specify the picture quality in the PICTURE menu and ADV ANCED SETTINGS. (see page 29, 30) 2 In the PICTURE menu, select “MEMORY SA VE”. MEMO[...]

33 Picture Pro les Load pro les and apply the picture adjustment values to the display as follows. Notes: • Loaded pro les are stored in memory according to the selected input interface. (see page 16) • When the settings are locked in “EXTENDED LIFE SETTINGS”, pro les cannot be loaded. 1 In the PICTURE menu, select “MEMORY LOA[...]

0 0 0 1/2 SOUND NORMAL NORMALIZE ST ANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0 MID SURROUND MAIN AUDIO OUT (PIP) 34 SOUND Adjustment 1 Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. 2 Select to adjust each item. While the “SOUND” menu is d[...]

99:99 MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y DA Y 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER ON FUNCTION OFF OFF PRESENT TIME OF DA Y 99:99 POWER OFF TIME POWER ON TIME 2/2 SET UP MUL TI DISPLA Y SETUP MUL TI PIP SETUP PORTRAIT SETUP SET UP TIMER NETWORK SETUP PRESENT TIME SETUP DISPLA Y ORIENT A TION LA[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE SCREENSA VER ST ART FUNCTION SCROLLING BAR ONL Y PRESENT TIME OF DA Y 99:99 MODE OFF 36 Do not display a still picture, esp[...]

SCREENSA VER ST ART FUNCTION MODE FINISH TIME ST ART TIME SCROLLING BAR ONL Y TIME OF DA Y 6:15 12:30 PRESENT TIME OF DA Y 15:00 SCREENSA VER ST ART FUNCTION MODE SA VER DURA TION SHOW DURA TION SCROLLING BAR ONL Y INTERV AL 12:00 3:00 PRESENT TIME OF DA Y 15:00 SCREENSA VER ST ART FUNCTION MODE SCREENSA VER DURA TION SCROLLING BAR ONL Y ST ANDBY A[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNAMIC SIDE BAR [...]

39 Reduces screen image retention EXPRESS SETTINGS Set the “Image Retention Reduction” menu to the recommended settings. All menus will be locked. PICTURE MENU: ST ANDARD PICTURE: Recommended setting for each model SIDE BAR ADJUST : BRIGHT NANODRIFT SA VER: HIGH MID PEAK LIMIT : ON 1 Select “EXPRESS SETTINGS”. EXPRESS SETTINGS CUSTOM SETTIN[...]

40 Reduces screen image retention CUSTOM SETTINGS Set the individual “Image Retention Reduction” menu. 1 Select “CUSTOM SETTINGS”. EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS 1 select 2 access 2 T o set each menu to the recommended setting: Select “RECOMMENDED SETTINGS”. PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNA[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE 41 Reduces power consumption Press to select “POWER SA VE” “ST ANDBY SA VE” “PC POWER MANAGEMENT” “DVI-D POWE[...]

42 1/2 SIGNAL SCREEN SA VER EXTENDED LIFE SETTINGS INPUT LABEL OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB POWER SA VE SET UP DVI-D POWER MANAGEMENT OFF Press to display the SETUP menu. Press to select INPUT LABEL. Press to display the INPUT LABEL screen. Press to select [...]

1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE 43 Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Selectable lang[...]

2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER NETWORK SETUP PRESENT TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE MUL TI PIP SETUP PORTRAIT SETUP × 2 MUL TI DISPLA Y SETUP HORIZONT AL SCALE OFF A1 OFF AI-SYNCHRONIZA TION VERTICAL SCALE LOCA TION OFF SEAM HIDES VIDEO × 2 MUL TI DISPLA Y SETUP 44 By lining up Plasma Displays in groups, for example, a[...]

45 Y ou can set the remote control ID when you want to use this remote control on one of several different displays. Note: T o operate this function, please purchase ID remote controller sold separately . Object model : EUR7636070R SET UP for MUL TI DISPLA Y 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - ,[...]

— MUL TI PIP DISPLA Y MODE BLEND PIP OFF 1 INSERT LEVEL TRANSP ARENCY INSERT 0 % TRANSP ARENCY LEVEL OFF MUL TI PIP SETUP 2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER MUL TI PIP SETUP PORTRAIT SETUP 46 MUL TI PIP SETUP Set the two-screen display function that is activated when is pressed. Press to select the MUL TI PIP SETUP . Press to display t[...]

47 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically . The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP . Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP[...]

48 SET UP for PORTRAIT Press to select VIEWING AREA or LOCA TION. Press to select each function. Notes: • For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed. HD signal: 1 125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF , 750 (720) / 60p • 50p, 1250 (1080) / 50i • When “VIEWING [...]

1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE 1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT [...]

1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE 3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] NOISE REDUCTION OFF 3 : 2 PULLDOWN SIGNAL OF[...]

3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE AUTO 51 3:2 PULLDOWN COLOR SYSTEM Select SIGNAL from the “SET UP” menu during Video (S V ideo) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” . Press to select e[...]

ADV ANCED NR [ VIDEO ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ Digital ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ COMPONENT ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ RGB ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF () NOISE REDUCTION OFF () NOISE REDUCTION ADV ANCED 52 VIDEO NR: Automatically reduces[...]

SYNC SIGNAL [ RGB ] 3 : 2 PULLDOWN XGA MODE AUTO OFF AUTO H-FREQ. V -FREQ. kHz Hz 63.98 60.02 SIGNAL FORMA T 1280×1024/60 V -FREQ. Hz 60.02 DOT CLOCK FREQ. MHz 108.0 SIGNAL FORMA T 1280×1024/60 3 : 2 PULLDOWN SIGNAL OFF SDI THROUGH OFF [ Digital ] NOISE REDUCTION OFF 53 SET UP for Input Signals This function operates only during input from PC IN [...]

MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP NETWORK SETUP DISPLA Y ORIENT A TION Landscape MUL TI PIP SETUP PORTRAIT SETUP 2/2 SETUP --:--:--:--:--:-- DHCP NETWORK SETUP SA VE 0 192.168. 0. 8 255.255.255. 0 192.168. 0. 1 1024 Auto RS-232C Off SUBNET MASK LAN SPEED GA TEWA Y IP ADDRESS PORT CONTROL I/F SELECT NETWORK ID MAC ADDRESS Network[...]

Options Weekly Command T imer Audio input select 1/3 Initial input Onscreen display On Off Off Off 0 0 Maximum VOL level Initial VOL level Off Input lock Off Button lock Off Remocon User level Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 3/3 O[...]

56 Item Adjustments Input lock Locks the input switch operation. Off PC SLOT INPUT* 1 VIDEO COMPONENT* 2 HDMI DVI *1 “SLOT INPUT” is displayed when an optional T erminal Board is installed. When a T erminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed. *2 “COMPONENT” may be displayed [...]

57 Item Adjustments Studio W/B Off: Nullify all the settings adjusted. On: Sets the color temperature for TV studio. Note: V alid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu. Studio Gain Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain”. On: Enables “Studi[...]

Weekly Command T imer 20:00 20:30 57 58 8/8 22:00 59 --:-- 60 --:-- --:-- 61 --:-- 62 --:-- A VL:00 DAM:NORM POF --- --- --- --- --- 63 64 1 Program Weekly Command T imer 8:00 10:30 02 01 1/8 --:-- 03 --:-- 04 --:-- --:-- 05 12:00 06 9:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM A VL:10 07 08 1 Program 58 Options Adjustments W eekly Command T imer Y ou[...]

Weekly Command T imer 02 10:30 Command No Time IMS:SL1 Command 1 Program Weekly Command T imer Command 02 Command No IMS:SL1 10:30 Time 1 Program 59 Options Adjustments Press to select Command No. Press to select a command number . 6 Press to select T ime / Command. Press to set each item. T ime: Set the time to execute a command program. Pressing [...]

60 Options Adjustment Set up the sound when an image input is selected. Image input Audio input [SLOT INPUT]*1 SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO [VIDEO] SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO [COMPONENT]*2 SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO [HDMI] SLOT INPUT / VIDEO / COMPONENT / HDMI / DVI / PC / [...]

61 Using Network Function This unit has a network function to control the network connected display with your computer . Note: T o use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”. (see page 54) When “LAN” is set, the slot power is turned on, and power indicator is lit[...]

62 Using Network Function PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup • Display status query Supported commands Commands to control the unit with PJLink™ protocol are shown in the table below . PJLink?[...]

63 Unit Setup Set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT” to “LAN”. (see page 54) Computer Setup Disable the proxy server settings and enable JavaScript. Y ou can use a Web browser to control the unit and set up a network and password. Access to the T OP screen of the Web browser control using a W eb b[...]

64 Using W eb Browser Control TOP screen structure of the W eb browser control After logging in, the T OP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC CONTROL BASIC CONTROL screen is displayed. (see below) OPTION CONTROL OPTION CON[...]

65 Notes: • T o use a DHCP server , make sure the DHCP server is started. • During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GA TEW A Y values cannot be entered. • When the set values are changed properly , “NETWORK SETTING CHANGED.” message and the changed set items are displayed. Item Details DHCP Set to ON when a DHCP server [...]

66 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

67 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 FULL The display of the pictures  lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspe[...]

68 Applicable Input Signals * Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) DVI-D IN (Dot clock (MHz)) HDMI 1 525 (480) / 60i 15.73 59.94 * (13.5) * (27.0) * 2 525 (480) / 60p 31.47 59.94 * (27.0)  5 * (27.0) * 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 62[...]

69 Applicable Input Signals 1/2 SIGNAL EXTENDED LIFE SETTINGS INPUT LABEL SET UP OFF ST ANDBY SA VE OFF PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER POWER SA VE This function allows you to reset the unit to the factory setting. Shipping condition 1 4 Press[...]

70 Command list of W eekly Command Timer No. Command Control details 1 AAC:MENCLR Audio Menu (CLEAR) 2 AAC:MENDYN Audio Menu (DYNAMIC) 3 AAC:MENSTD Audio Menu (ST ANDARD) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S Audio out when PIP[...]

71 Speci cations TH-58PF20U TH-65PF20U Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Rated Power Consumption 600 W 630 W Stand-by condition Save OFF 1.0 W , Save ON 0.5 W Save OFF 1.0 W , Save ON 0.5 W Power off condition 0.2 W 0.2 W Plasma Display panel Drive method : AC type 58-inch, 16:9 aspect ratio Drive method : AC type 65-inch,[...]

Panasonic Solutions Company Unit of Panasonic Corporation of North America Executive Of ce : Three Panasonic W ay 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial numb[...]