Panasonic UB-T781W manuel d'utilisation

UB-T781 Operating Instructions (For Basic Operations) Electronic Board (elite Panaboard) Model No. UB-T781 UB-T781W UB-T761 Installation Manual Included (for qualified service personnel) • T o assemble this unit, please refer to the Installation Manual on pages 37 through 60. • Before operating this unit, please read these instructions complete[...]

Introduction Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Feature Highlights By connecting the elite Panaboard to a computer and using a projector to display the contents of the computer’s screen on the elite Panaboard, you can do the following. Electronic P[...]

Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Serial number Dealer’s name Dealer’s address Dealer’s tel no. About the Operating Instructions There are 2 separate operating manuals for the elite Panaboard. For Basic Operations (this document) Instructions for connecting and operati[...]

Abbreviations Windows ® refers to the Microsoft ® Windows ® operating system. Windows ® 2000 refers to the Microsoft ® Windows ® 2000 operating system. Windows ® XP refers to the Microsoft ® Windows ® XP operating system. Windows Vista ® refers to the Microsoft ® Windows Vista ® operating system. DirectX ® refers to the Microsoft ® Di[...]

Warning about saving data When the system storage device or any of its optional storage device is adversely effected by operational errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction, repair or inadvertently, the memory contents may be lost or changed. Before operating the system, mak[...]

Exemption of Liability Panasonic Communications Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to, the following: 1. Altering the device or improper installation construction. 2. Using the device for purposes beyond its intended use. 3. Earthquake, fire, flood, tidal wave, hurricane, lightning or other natural phe[...]

Table of Contents For Your Safety .. ...................................................................................... 8 For Your Safety .. ...............................................................................................................8 For Users .. ...............................................................................[...]

For Your Safety To prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe operation of your unit. • This section explains the graphic symbols used in this manual. W ARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes hazards that could result [...]

Plug the power cord firmly into an AC outlet. Otherwise, it can cause fire or electric shock. Do not pull, bend, rest objects on, or chafe the power cord and plug. Damage to the power cord or plug can cause fire or electric shock. Do not attempt to repair the power cord, or plug. If the power cord or plug is damaged or frayed, contact an authorized[...]

Make sure that the battery is installed with the correct polarity as indicated on the battery holder. Incorrectly installed batteries may burst or leak, resulting in injuries. Batteries that seem worn down or damaged should not be used. Using worn down or damaged batteries may result in leaking. Do not charge, short, heat, break or throw in a fire,[...]

After installing or moving the unit, lock the casters and set the fall-prevention extension legs. Locking the casters (Push this side) Push to lock Operating Safeguards If the unit falls down or gets damaged, turn the unit off and unplug the power cord. Otherwise, it may cause fire or electric shock. Do not lean against the screen or on the cover ([...]

As the colours of the wire in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire that is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELL[...]

Warning Label 䄺ਞ ˖ Ўњ䰆ℶ㾺⬉џᬙǃߛ࣓ᠧᓔᴎⲪDŽ ᴎ఼ݙ䚼≵᳝⫼᠋㞾Ꮕৃҹ㓈ׂⱘ䚼ߚDŽ 㓈ׂџᅰࡵ䇋ྨᠬ᳝䌘Ḑⱘ㓈ׂҎਬDŽ PBQAA0582ZA W ARNING: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Operating Instructions (For Basic[...]

Included Accessories Check that all of the following items are included with your elite Panaboard. In the event that an item is missing, please contact your dealer. List of Accessories Power Cord (3 m [9 ft. 10 1 / 8 in.]) 1 USB Cable (5 m [16 ft. 4 7 / 8 in.]) 1 Software CD-ROM 1 AAA Battery (LR03) (Disposable) 1 Electronic Pen 1 Penpoint (Replace[...]

Names and Uses of the Parts Screen Front View Position Sensor Detects the position of the electronic pen. Do not block the sensor while operating the elite Panaboard. Screen Board Project the contents of a computer screen using a projector. Power Switch Pen Tray Push the center of the door to open the pen tray, which can hold up to 2 electronic pen[...]

Rear View AC Inlet Power Cord Notice • The elite Panaboard is designed exclusively for projector images. Do not write on the screen board with a white-board marker. • The operation of external devices connected via the USB hub is not guaranteed. • External devices connected via the USB hub that require a lot of power, such as scanners or CD/ [...]

Notice • Use the electronic pen by holding it at a right angle to the screen board. Holding it at an angle can cause its position to be read incorrectly. • Do not use multiple pens at the same time. This can result in erroneous operation. • Do not push the penpoint while holding the pen close to the elite Panaboard. Doing so can cause erroneo[...]

Connecting External Components 1. Set the power switch to "O" (OFF), connect the power cord (included) to the elite Panaboard, and plug the power cord into an AC outlet. Power Cord Power Switch (ON) (OFF) Rear Power Cord (Included) • Plug the power cord into an outlet that is close to the elite Panaboard and in a location that is easy t[...]

2. Connect the elite Panaboard to a computer using the USB cable (included). • elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port. Computer: Plug the A connector (larger connector) into a USB port on the computer. • Do not connect the elite Panaboard via a USB hub. This could result in erroneous o[...]

Connecting External Devices 1. Connect the external device to the elite Panaboard using a USB cable (sold separately). • elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard’s USB port. External device: Plug the B connector (smaller connector) into a USB port on the external device. USB Cable (Sold Separately) T o U[...]

Volume Control • The volume of the USB speaker on the elite Panaboard can be controlled using the Volume Dial, the volume of Windows, and the volume of the application being used. To adjust the volume, use the Volume Dial, or adjust the volume of the application. Power Switch • After turning the elite Panaboard off, wait more than 2 seconds bef[...]

Installing the elite Panaboard software You need to install the elite Panaboard software on the computer that will be used with the elite Panaboard. To install the elite Panaboard software, follow the procedure below. Notice • Do not connect the USB cable until the installation is completed. • Do not connect more than 1 elite Panaboard to the s[...]

Setting the Projector Set up your projector as instructed below. About Positioning the Image • When you are projecting an image, make sure that the edge of the projected image is at least 5 mm ( 1 / 4 in.) from the screen frame. The electronic pen may not function correctly within 50 mm (2 in.) of the position sensor in the upper-left corner of t[...]

• If the image is projected trapezoidally, the position of the electronic pen may not be read correctly. Adjust the projector so that the projected image is a rectangle. Refer to your projector's documentation for information on adjusting the projected image. Set the Proper Resolution • Set your computer's and projector's resolut[...]

Starting the elite Panaboard software and Performing Calibration 1. Turn on the elite Panaboard. 2. Connect the elite Panaboard to your computer with the USB cable. • The elite Panaboard software starts automatically. • When you start the elite Panaboard software for the first time, the calibration screen is displayed. • Restart your computer[...]

• After calibration has completed, the icon is displayed in the notification area, and the Desktop Drawing Tool is automatically displayed. [Desktop Drawing Tool] • You will be able to use elite Panaboard software. Note • For detailed information about using the elite Panaboard software, refer to the included electronic manual or the help men[...]

Viewing the Electronic Documentation Follow the procedure below to view the electronic documentation "Operating Instructions (For Software)". 1. Turn on your computer and start Windows. 2. Open "Operating Instructions (For Software)" from the Start menu. ([Start] ® [All Programs] ® [Panasonic] ® [elite Panaboard] ® [Operatin[...]

Daily Care When cleaning the elite Panaboard or inside the elite Panaboard, make sure to switch off the power and unplug the power cord from the AC outlet. Cleaning the elite Panaboard Gently wipe the elite Panaboard with a soft, moist cloth. Notice • The elite Panaboard is designed exclusively for projector images. • For spots that are difficu[...]

Replacing the Penpoint of the Electronic Pen As the penpoint of the electronic pen becomes worn, a hole will appear in the penpoint. Continuing to use the electronic pen in this condition can cause damage to the screen or unsatisfactory operation, so replace the penpoint with a new one as soon as possible. Operating Instructions (For Basic Operatio[...]

Troubleshooting When experiencing problems, please refer to the table below for possible solutions. If the problem persists, contact your dealer. Symptom Possible cause and solution See page The LEDs do not light when the power switch is turned on. Check that the power cord is properly plugged in. → If the problem persists, turn off the power, an[...]

Symptom Possible cause and solution See page The message "The pen battery is low. Replace the battery soon." is displayed on the computer screen. The electronic pen’s battery is weak. → Replace the electronic pen’s battery. 17 28 Marks written with a white-board marker cannot be erased. Because the elite Panaboard is designed exclus[...]

Specifications Model Number UB-T781 / UB-T781W / UB-T761 General Power AC 100 V–240 V, 50 Hz/60 Hz Power Consumption: During Operation 0.4 A Operating Environment Temperature: 15 °C to 35 °C (59 °F to 95 °F) Humidity: 30 % to 80 % Storage Environment Temperature: -20 °C to 40 °C (-4 °F to 104 °F) Humidity: 15 % to 80 % Interface USB 2.0 N[...]

Model Number UB-T781 General External Dimensions: Height ´ Width ´ Depth 1,340 mm ´ 1,752 mm ´ 89 mm (4 ft. 4 3 / 4 in. ´ 5 ft. 9 in. ´ 3 1 / 2 in.) Weight 27 k g (59.52 lbs) Input Unit Screen Board Size: Height ´ Width 1,175 mm ´ 1,692 mm (3 ft. 10 1 / 4 in. ´ 5 ft. 6 5 / 8 in.) Interactive Features Effective Area: Height ´ Width 1,165 m[...]

Model Number UB-T781W General External Dimensions: Height ´ Width ´ Depth 1,340 mm ´ 1,899 mm ´ 89 mm (4 ft. 4 3 / 4 in. ´ 6 ft. 2 3 / 4 in. ´ 3 1 / 2 in.) Weight 28 k g (61.73 lbs) Input Unit Screen Board Size: Height ´ Width 1,175 mm ´ 1,839 mm (3 ft. 10 1 / 4 in. ´ 6 ft. 3 / 8 in.) Interactive Features Effective Area: Height ´ Width 95[...]

Model Number UB-T761 General External Dimensions: Height ´ Width ´ Depth 1,142 mm ´ 1,489 mm ´ 89 mm (3 ft. 9 in. ´ 4 ft. 10 5 / 8 in. ´ 3 1 / 2 in.) Weight 21 k g (46.3 lbs) Input Unit Screen Board Size: Height ´ Width 977 mm ´ 1,429 mm (3 ft. 2 1 / 2 in. ´ 4 ft. 8 1 / 4 in.) Interactive Features Effective Area: Height ´ Width 967 mm ´ [...]

Supplies & Accessories Optional Device Electronic Pen UE-608025 Stand KX-B061 *1 Stand UE-608030 Install-Free Kit UE-608050 *1 KX-B061 is not available for the UB-T761. • To purchase separately sold items, contact your dealer. 36 Operating Instructions (For Basic Operations) Appendix[...]

Installation Manual (for qualified service personnel) • Request assembly of the Electronic Board, stand and wall mounting from your dealer. • Before constructing or installing the elite Panaboard, please read "Installation Manual (for qualified service personnel)" carefully. Especially, please read "For Your Safety" carefull[...]

Have the unit installed, removed and disposed of only by qualified service personnel. CAUTION After installing or moving the electronic board, lock the casters and set the fall-prevention extension legs. Locking the casters (Push this side) Push to lock If the unit is hung on a wall, confirm the wall must be capable of supporting at least the follo[...]

Included Accessories Confirm that the following items are included with the elite Panaboard. No. Part Name Illustration Q’ty Remarks Power Cord (3 m [9 ft. 10 1 / 8 in.]) 1 The illustration of the power cord is for the United States. The shape of the plug may vary depending on country/area. USB Cable (5 m [16 ft. 4 7 / 8 in.]) 1 For computer conn[...]

No. Part Name Illustration Q’ty Remarks Warranty 1 May not be included depending on country/ area. Notice • Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6, appropriate for your type of wall (page 45). 40 Operating Instructions (For Basic Operations) Installation Manual[...]

Wall Mounting Construction Checking the Wall When mounting on a wall, consult with your building's owner, caretaker or construction manager to determine if the wall strength is sufficient to install the elite Panaboard. For safety, install the elite Panaboard only after thoroughly understanding the type of walls, the appropriate types of screw[...]

Installing the Wall Mounting Plates 1. Ensure that the wall is strong enough to support the elite Panaboard. Rated strength: greater than 1,373 N (140 k g f) 2. Using the measuring tape and level, mark the 8 locations to insert the screws. UB-T781 813 mm (2 ft. 8 in.) 40 mm (1 9 / 16 in.) 982 mm (3 ft. 2 21 / 32 in.) 30 mm (1 3 / 16 in.) 44 mm (1 2[...]

UB-T761 40 mm (1 9 / 16 in.) 784 mm (2 ft. 6 7 / 8 in.) 30 mm (1 3 / 16 in.) 44 mm (1 23 / 32 in.) (1 ft. 9 21 / 32 in.) 222.5 mm (8 3 / 4 in.) 469.5 mm (1 ft. 6 1 / 2 in.) 462 mm 550 mm (1 ft. 6 3 / 16 in.) Note • The dotted line in the illustration represents the outer edge of the elite Panaboard. 3. Drill 8 holes for the wall mounting plates. [...]

5. Mount the elite Panaboard on the wall. See "Assembling the elite Panaboard" (For Wall Mounting ® page 52). 44 Operating Instructions (For Basic Operations) Installation Manual[...]

Wall Types and Installation Procedures The method for attaching the wall mounting plates to the wall will vary depending on the wall's structure. Three available options are listed below. Other methods may be necessary depending on the wall. Metal or Concrete walls Stud plugs (not included) are needed. Drill bit Metal or concrete wall Stud plu[...]

Plasterboard walls Split-wing toggles (not included) are needed. Plasterboard Split-wing toggle W all mounting plate Bolt Arms Arms Insert the bolt through the hole in the wall mounting plate and into the hole in the wall so that the arms of the split-wing toggle are horizontal. For the correct hole size, refer to the instructions for the particula[...]

Stand Assembly (Sold Separately) Included Parts Check that the following parts are included with the stand (KX-BP061). No. Part Name Illustration Q'ty Stand Base 2 Support Beam 2 Cross Bar (A) 2 Cross Bar (B) 1 Screw (M6 ´ 45 mm [1 3 / 4 in.]) 10 Two-wing Bolt (M5 ´ 12 mm [ 1 / 2 in.]) *1 2 Support Bracket 2 Fall-prevention Extension Leg 4 S[...]

CAUTION Before assembly, be sure to lock the casters. Locking the casters (Push this side) Assembly Instructions 1. Assemble the fall-prevention extension legs. 48 Operating Instructions (For Basic Operations) Installation Manual[...]

2. Assemble the stand. REAR FRONT Assemble with the holes toward the front. Locking caster side (rear) Locking caster side (rear) Notice • Do not over-tighten the screw ( ). (Doing so can warp the support beams.) • Assemble the stand so that the locking casters are on the rear side. Operating Instructions (For Basic Operations) 49 1 Installatio[...]

3. Pull the fall-prevention extension legs down. 2 1 Note • When folding back the fall-prevention extension legs, release the lock as follows ( 1 , 2 ). 1 1 2 4. Mount the elite Panaboard. See "Assembling the elite Panaboard" (For Mounting on a Stand (Sold Separately) ® page 55). 50 Operating Instructions (For Basic Operations) Install[...]

Assembly Instructions Preparing for Removing the elite Panaboard from Its Packaging Open the box, remove the accessory box & packing foam and open the plastic sheet of the elite Panaboard. Shipping Box Shipping Box Electronic Board [ Accessory Box Contents ] • Power Cord 1 • USB Cable 1 • CD-ROM 1 • Cable Holder 1 • W all Mounting Pla[...]

Assembling the elite Panaboard For Wall Mounting 1. Loosely wrap the power cord with the cable tie, and plug the power cord into the AC inlet. • Connect the power cord to the elite Panaboard before installing on a wall. Power Cord 1 2 2. Insert the end of the cable tie into the cable tie fastening hole behind the control-power cover-back. 3. Pull[...]

4. Remove the screw ( A ) of the attachment cover ( B ), which is fixed to the attachment board, and slide the attachment cover down. Ensure that the attachment cover and the screw hole ( C ) of the board attachment are aligned. 2 1 3 After unscrewing the attachment cover screws ( A ), fix them in the holes after sliding the attachment cover down, [...]

8. Disconnect the 2 connectors from the audio board ( D ). 4 9. Fasten to the wall. Fasten the lower portion of the board attachment securely to the wall. 10. Connect the 2 connectors of the USB speaker to the audio board ( D ). 4 11. Attach the front lower frame cover. Attach the front lower frame cover to the elite Panaboard and fix it using 4 sc[...]

12. Wipe the screen board surface. Gently wipe the screen board surface with a soft, moist cloth. Notice • Do not use thinner, benzene, or abrasive chemicals to clean. (Doing so can result in discoloration.) • Do not wipe the screen board with a dry cloth. (Doing so can cause static electricity build-up.) 13. Confirm that the elite Panaboard ca[...]

3. Hang the elite Panaboard on the stand with the screw heads. 4. Secure the elite Panaboard to the stand frame using the two-wing bolts (M5 ´ 12 mm [ 1 / 2 in.] [2 count]) included with the stand. Note • After installation is complete, use the included cable holder to manage the power cord and USB cable. • When installing the elite Panaboard [...]

Confirming the elite Panaboard Operation After assembling the elite Panaboard, confirm that it operates properly by following the procedure below. Action Checkpoints Operation Measure 1 Turn on the power. Green LED lights. (Normal operation) Green LED does not light, or red LED is blinking. Check the power cord. See step 1 of "Assembling the e[...]

Repackaging To repackage the elite Panaboard, perform steps in "Assembling the elite Panaboard" (For Wall Mounting ® page 52, For Mounting on a Stand (Sold Separately) ® page 55) in reverse. Package the unit as depicted in the diagram in "Preparing for Removing the elite Panaboard from Its Packaging" (page 51). Notice • When[...]

Attaching the Install-Free Kit (Sold Separately) Attaching the Install-Free Kit 1. Unscrew the 4 screws from the front lower frame cover. 2. Lift the bottom of the front lower frame cover to remove it. Note • The main unit and the USB speakers on the front lower frame cover are connected with the cable. Be careful not to damage the connectors. 3.[...]

5. Disconnect the black cable and the white cable from the clamper ( B ). 2 6. Unscrew the 7 screws and remove the hub PCB shield plate. 7. Attach the install-free kit to the main unit as shown below. 8. Attach the hub PCB shield plate to the main unit using the 7 screws and fix the black cable and white cable to their previous positions using the [...]

Operating Instructions (For Basic Operations) 61 1 Notes[...]

62 Operating Instructions (For Basic Operations) Notes[...]

Operating Instructions (For Basic Operations) 63 1 Notes[...]

© Panasonic Communications Co., Ltd. 2009 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and r[...]