Panasonic W1014HM0-YI manuel d'utilisation

35 Operating Guide W1014HM0 -YI VQT5K88A(E)[...]

– 2 – f SDXC logo is a trademark of SD-3C, LLC. f MMC (Multi Media Card) is a registered trademark of Inneon T echnologies AG. f Microsoft ® and Windows ® are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. f Screenshots are used according to Microsoft Corporation guidelines. f Appl[...]

Contents – 3 – Contents Chapter 1 Overview 5 Before using the camera 6 Accessories 8 Camera module 8 Recording module 8 Electronic HD color viewnder 8 Shoulder mount module 8 Use of the camera on a system 9 Basic system devices 9 Expansion system devices 9 Accessories 9 Chapter 2 Description of Parts 10 Camera module 11 Left side 11 Right si[...]

Contents – 4 – Setting menu initialization 83 Menu list 84 [SYSTEM SETTINGS] 8 4 [CAMERA SETTINGS] 91 [REC SETTINGS] 9 5 [VF SDI SETTINGS] 9 6 [PERIPHERAL] 98 Menu operations 99 [SYSTEM SETTINGS] 99 [CAMERA SETTINGS] 101 [REC SETTINGS] 103 [VF SDI SETTINGS] 103 [PERIPHERAL] 104 Chapter 1 1 Maintenance and Inspection 105 Inspections before shoot[...]

Before using the camera, read this chapter . Chapter 1 Overview[...]

– 6 – Chapter 1 Overview — Before using the camera Before using the camera r When using this product during rain or snow or when at the beach, be careful that water does not get inside the camera recorder . W ater causes damage to the camera recorder and memory card. (Repair may be impossible) r Keep the camera recorder away from devices (TVs[...]

– 7 – Chapter 1 Overview — Before using the camera r Note the following points. f If you prepare to record important images, always shoot some advance test footage to verify that both pictures and sound are being recorded normally . f Should video or audio recording fail due to a malfunction of the camera or the P2 cards used, we will not ass[...]

– 8 – Chapter 1 Overview — Accessories Accessories Camera module f Mount cap (already attached to the camera module) Recording module f Control panel extension unit f Control panel mounting part Electronic HD color viewnder f Connecting cable f Slider unit f Slider unit mounting screw (2 pcs.) f Eye cup (already attached to the Electronic [...]

– 9 – Chapter 1 Overview — Use of the camera on a system Use of the camera on a system Use the following recommended parts. Basic system devices The following are required devices for shooting. Part name Part No. Remark V ARICAM 35 Camera module* 1 AU-V35C1G “Assembling the camera module and recording module” (page 22) Recording module* 1[...]

This chapter describes the names, functions, and operations of parts on the camera. Chapter 2 Description of Parts[...]

– 1 1 – Chapter 2 Description of Parts — Camera module Camera module Left side 2 3 4 5 6 7 9 8 10 11 1 1 Lens ange back adjustment hole Used when adjusting the lens ange back. 2 USER buttons (<1>/<2>/<3>) User-selected functions can be assigned to each button. Pressing a button performs the assigned function. 3 Focus h[...]

– 12 – Chapter 2 Description of Parts — Camera module - 3/8-16 UNC 2 Fan outlet Fan outlet for dissipating heat. Do not block this when the camera is in use. 3 Recording module release lever Lever for removing the recording module (optional) from the camera module. 4 Accessory mounting holes For attaching accessories. f Mounting hole size - 1[...]

– 13 – Chapter 2 Description of Parts — Camera module Rear 1 2 1 Lock plate Fitting which secures the recording module in place when connected. 2 Recording module connection terminal T erminal for connecting the recording module. To p 1 4 5 1 2 3 1 Viewnder mounting holes For attaching the viewnder . 2 Mounting hole for control panel mo[...]

– 14 – Chapter 2 Description of Parts — Recording module Recording module Left side 1 2 3 4 5 6 8 7 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 <HOME> button Returns to the HOME screen when pressed. 2 <PLA Y> button Shows the PLA Y screen when pressed. 3 <TC> button Shows the TC screen when pressed. 4 <INFO> button Show[...]

– 15 – Chapter 2 Description of Parts — Recording module 22 SD memory card slot Slot for SD memory cards (optional). SD memory cards are used for opening the camera setting menu, recording/opening lens les, or uploading metadata. Right side 1 2 3 4 5 6 8 7 9 1 <SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminal Out[...]

– 16 – Chapter 2 Description of Parts — Recording module Rear 1 2 3 4 5 6 8 7 9 10 1 Battery holder For mounting Anton/Bauer batteries. 2 Battery release lever Pull this battery release lever down to release the battery . 3 Battery contact terminals Contact terminals for the battery . 4 Speaker EE audio can be monitored during recording while[...]

– 17 – Chapter 2 Description of Parts — Recording module Bottom 1 1 Shoulder mount module/tripod mounting holes For attaching the shoulder mount module or a tripod. f Mounting hole size - 1/4-20 UNC (screw length 5.5 mm or shorter) - 3/8-16 UNC (screw length 5.5 mm or shorter)[...]

– 18 – Chapter 2 Description of Parts — Electronic HD color viewnder Electronic HD color viewnder Left side 1 2 3 4 5 6 7 1 <EVF USER 1>/<EVF USER 2> buttons User-selected functions can be assigned to each button. Pressing a button performs the assigned function. Functions are set on the viewnder menu. 2 <CAM MENU> [...]

– 19 – Chapter 2 Description of Parts — Electronic HD color viewnder 4 Stopper Used when removing the viewnder from the slider unit. To p 1 2 1 Lock lever (left/right position) Adjusts the position of the viewnder (left/right). 2 Lock lever (front/back position) Adjusts the position of the viewnder (front/back).[...]

– 20 – Chapter 2 Description of Parts — Shoulder mount module Shoulder mount module Left side 2 3 1 1 Support rod lock knob Secures the rod in place. : Release, : Lock 2 Accessory attachment (rosette) Attach accessories such as hand grip. f Mounting screw size - M6 (screw length 9 mm or shorter) 3 Stopper Pressed when removing the slide rail [...]

Before you use the camera, assemble the unit following the procedures in this chapter . The mounting of accessories is also described in this chapter . Chapter 3 Preparation[...]

– 22 – Chapter 3 Preparation — Assembling modules Assembling modules Assembling the camera module and recording module Fig. 1 Fig. 2 Fig. 3 Fig. 4 1 Align the upper lock angle in front of the recording module with the upper lock plate at the rear of the camera module. (Fig. 1) 2 Firmly push in the recording module and connect the connection t[...]

– 23 – Chapter 3 Preparation — Assembling modules Mounting the Electronic HD color viewnder Fig. 1 Fig. 2 Release Lock 1 Attach the slider unit to the viewfinder mounting holes on top of the camera module using the two supplied screws. (Fig. 1) 2 Slide the viewfinder plate from above into the slider unit. (Fig. 2) Release the viewnder l[...]

– 24 – Chapter 3 Preparation — Assembling modules Mounting the shoulder mount module Mount the shoulder mount module after mounting the camera module and recording module. Fig. 1 Fig. 2 Fig. 3 Slide rail lock knob Lock Release Stopper Slide rail lock knob Stopper opening 1 Release the slide rail lock knob. 2 Remove the slide rail from the sho[...]

– 25 – Chapter 3 Preparation — Attaching and removing accessories Attaching and removing accessories Eye cup/eye piece lter The eye cup and eye piece lter can be removed. Always use the camera with these attached. b a a: Eye cup b: Eye piece lter Attaching a tripod When mounting the camera on a tripod, use the optional tripod adaptor[...]

– 26 – Chapter 3 Preparation — Attaching and removing accessories Attaching the rain cover The gure below shows an example of use of the rain cover SHAN-RC700 (optional). Tighten the cord Secure with the surface fastener[...]

– 27 – Chapter 3 Preparation — Power supply Power supply A battery or an external DC power supply can be used as the power supply . Using batteries Connection of the following batteries to the camera has been veried. r Anton/Bauer batteries HYTRON140 DIONIC HC/DIONIC HCX/DIONIC HD r IDX batteries ENDURA HL9 @ @ NOTE t Other batteries can b[...]

– 28 – Chapter 3 Preparation — Power supply @ @ NOTE t Contact your dealer for information about the V -mount type battery plate. t When the V -mount type battery plate is used, % (percent) is not displayed even if batteries with a battery level indicator function are used. t When removing the plate, remove by sliding the release lever . t Wh[...]

– 29 – Chapter 3 Preparation — Mounting and adjusting the lens Mounting and adjusting the lens Mounting the lens Fig. 1 Fig. 2 Fig. 3 Lens lever Mount cap Fig. 4 Cable clamp <LENS> terminal 1 Raise the lens lever and remove the mount cap. (Fig. 1) 2 Align the convex portion at the upper right of the lens mount with the concave portion a[...]

– 30 – Chapter 3 Preparation — Connecting to the DC output terminal Connecting to the DC output terminal Connecting the <DC OUT/RS> terminal to the external recording start/stop switch It is possible to get a 1.0 A current from the <DC OUT/RS> terminal of the recording module. Recording start/stop can be controlled by connecting a[...]

– 31 – Chapter 3 Preparation — Setting the date/time of the internal clock Setting the date/time of the internal clock The value of the time is recorded to content (clips) and affects the thumbnail playback order . Before recording, be sure to check and set the date and time zone. 1 Press the <MENU> button. f The [MENU] screen is displa[...]

This chapter describes the video combinations that can be recorded and the color grading (in-camera color grading) that can be performed using the camera. Chapter 4 V ideo Recording and Color Grading[...]

– 33 – Chapter 4 Video Recording and Color Grading — Dual-recording Dual-recording The camera has two built-in recorders. Main slot Sub slot r Main recorder Card slot expressP2 memory card slot × 2 Compatible memory cards expressP2 memory card P2 memory card (with some restrictions) f P2 memory cards cannot be used when the 4K format or the [...]

– 34 – Chapter 4 Video Recording and Color Grading — Selecting the resolution, codec, and video format for recording Selecting the resolution, codec, and video format for recording Y ou can select the recording resolution, recording codec, and recording frame rate. f [PIXEL]: Resolution f [MAIN CODEC]: Recording format f [FREQUENCY]: System f[...]

– 35 – Chapter 4 Video Recording and Color Grading — In-camera grading In-camera grading This chapter describes the camera’s grading function. Y ou can record V -Log (master video) in the main recorder and grading video in the sub recorder simultaneously . Grading function [CDL]: f Controlled using [Slope], [Offset], [Power] (RGB stand-alon[...]

– 36 – Chapter 4 Video Recording and Color Grading — P2 card P2 card Inserting a P2 card When using the camera for the rst time, be sure to set the time data beforehand. (page 31) Insert the expressP2 memory card into the main slot and the microP2 memory card into the sub slot. Main slot card access LED Sub slot 4 Main slot 1 Main slot 2 S[...]

– 37 – Chapter 4 Video Recording and Color Grading — P2 card Removing a P2 card Fig. 1 Fig. 2 1 Open the card slot cover . 2 Remove the card. f expressP2 memory cards - Slide the main slot lock switch to the left to release the lock. - Lift the eject button (Fig. 1), and press in. (Fig. 2) f microP2 memory cards - Press in the microP2 card fu[...]

– 38 – Chapter 4 Video Recording and Color Grading — P2 card Card access LED P2 card status Flashing in green slowly Card full There is no free space on the P2 card. Reading only is possible. Write protect The write-protect switch on the P2 card is at the Protect position. Reading only is possible. Unrecordable card Recording is not possible [...]

– 39 – Chapter 4 Video Recording and Color Grading — P2 card @ @ NOTE t From [MENU] → [SYSTEM SETTINGS] → [CARDS/MEDIA] → [CPS P ASSWORD], set or delete the CPS. t Up to 16 characters can be input. t The encrypted memory card is not recognized in the SD card slot in a computer . t If the card is unable to be recognized, authenticate wit[...]

– 40 – Chapter 4 Video Recording and Color Grading — P2 card LASTCLIP.TXT* AUDIO AVCLIP CLIP ICON PROXY VIDEO VOICE CONTENTS Drive: All these folders are required. If even part of this information is modified or deleted, the data may no longer be recognized as P2 data, or the card may no longer be able to be used with P2 devices. This is the[...]

– 41 – Chapter 4 Video Recording and Color Grading — Special recording functions Special recording functions Hot swap recording When P2 cards are inserted into two card slots, recording can be performed continuously across two cards. Also, the card other than the one currently being recorded to can be swapped and recording can be continued on[...]

This chapter describes how to change each setting and check the setting status using the control panel. Chapter 5 Control Panel[...]

– 43 – Chapter 5 Control Panel — Control panel operation Control panel operation Basic camera operations can be performed using the control panel. When the setting is changed in the control panel, the setting in the [MENU] is also changed in conjunction. j j a b c d e g h f i a: <HOME> button b: <PLA Y> button c: <TC> button[...]

– 44 – Chapter 5 Control Panel — Control panel operation f Channel display [1]/[2] or [3]/[4] f Level meter display Displays the level represented by 19 bars. (2 dB increments) f Standard level bar At the − 18 dB position or the − 20 dB position The standard is in [MENU] → [SYSTEM SETTINGS] → [AUDIO LEVEL] → [HEADROOM] 6 W arning/er[...]

– 45 – Chapter 5 Control Panel — Control panel operation Securing the control panel using the control panel mounting part The removed control panel can be secured using the control panel mounting part. Fig. 1 Fig. 3 Fig. 2 1 Mount the control panel mounting part. (Fig. 1) 2 Mount the control panel onto the control panel mounting part. (Fig. 2[...]

– 46 – Chapter 5 Control Panel — HOME screen HOME screen The Home screen displays the basic camera settings and is used to change those settings. [FPS] Sets the frame rate. [VFR] T oggles the variable frame rate. When this is [OFF], the frame rate become 1x the rate set in [MENU] → [SYSTEM SETTING] → [FREQUENCY]. f When this is [ON], audi[...]

– 47 – Chapter 5 Control Panel — HOME screen [MAIN CODEC] Sets the main recorder ’s codec. The camera’s basic system are determined by 3 settings: [FREQUENCY], [PIXEL], and [CODEC MAIN]. Restarting the system may be necessary if basic system settings are changed. After conrming the three settings, restart in accordance with the guide. [...]

– 48 – Chapter 5 Control Panel — PLA Y screen PLA Y screen The Play screen is the screen for playing recorded videos. Y ou can select clips by turning the jog dial button. Play the clip selected in the middle by pressing the jog dial button. At the end of the clip, the display will return to the list display . Playback is paused by pressing t[...]

– 49 – Chapter 5 Control Panel — TC screen TC screen The TC screen is the screen for setting the time code. [TC/UB/Dur .] Switches between the HOME screen and status display . [TC]: T ime code [UB]: User bits [Dur .]: Duration [FREE/REC RUN] Switches between free run and recording run. This is xed to recording run when the variable frame r[...]

– 50 – Chapter 5 Control Panel — INFO screen INFO screen The INFO screen displays information about the camera. [DIAGNOSTICS] Displays camera statuses such as warnings. [FPS] Displays all frequency settings together . [VERSION] Displays the rmware version. [UPDA TE]: Performs an update of the rmware. [PERIPHERAL] Displays information ab[...]

– 51 – Chapter 5 Control Panel — VIEW screen VIEW screen Displays video. For status display contents, congure [MENU].[...]

– 52 – Chapter 5 Control Panel — MENU screen MENU screen Displays the [MENU]. Depending on the [MENU] → [SYSTEM SETTINGS] → [MON OUT] → [MENU DISP] setting, [MENU] is displayed for the output from the <MON OUT1> terminal and <MON OUT2> terminal.[...]

This chapter describes how to prepare and adjust audio recorded at the time of shooting. Chapter 6 Audio recording[...]

– 54 – Chapter 6 Audio recording — Preparing for audio input Preparing for audio input Prepare the camera for connecting audio input devices. Using front microphone Microphones such as the stereo microphone kit AJ-MC900G (optional) can be mounted. a b Fig. 1 Fig. 2 Fig. 3 Fig. 4 1 Remove the screws at the microphone holder mounting position a[...]

– 55 – Chapter 6 Audio recording — Preparing for audio input Using audio devices a c b a: <AUDIO IN 1> terminal b: <AUDIO IN 2> terminal c: <LINE>/<MIC> switch 1 Connect the audio device to the <AUDIO IN 1> or <AUDIO IN 2> terminal of the recording module using the XLR cable. 2 According to the channel to w[...]

– 56 – Chapter 6 Audio recording — Selecting audio input and adjusting recording levels Selecting audio input and adjusting recording levels The camera supports independent 4-channel sound recording in all recording formats. Selecting audio input signals 1 Press the <HOME> button to display the HOME screen. 2 From [SYSTEM] → [AUDIO] ?[...]

– 57 – Chapter 6 Audio recording — Selecting audio input and adjusting recording levels 2 From [SYSTEM] → [AUDIO] → [VR/IN/OUT], set [IN]. For [CH3/4], switch to [CH1/2] in [to CH1/2]. 3 Select [MANUAL] in [FRONT1 LEVEL] or [FRONT2 LEVEL]. If [AUTO] is selected, [A] is displayed on the [VR] screen and manual adjustment is not possible. 4 [...]

This chapter describes the viewnder screen display and how to make adjustments. Chapter 7 V iewnder[...]

– 59 – Chapter 7 Viewnder — Adjusting and setting the viewnder Adjusting and setting the viewnder The camera’s panel is OLED (organic EL). Positioning your eye near the viewnder will trigger the eye sensor to automatically display the image. Adjustment method b c d a a: Lock lever (left/right position) b: Lock lever (front/back [...]

– 60 – Chapter 7 Viewnder — V iewnder status display Viewnder status display In addition to video, the viewnder displays messages, a center marker , safety zone marker , zebra patterns, and other information that indicate the camera settings and operation status. Lamp display 1 2 3 4 1 Green tally lamp Lights up in green when gree[...]

– 61 – Chapter 7 Viewnder — V iewnder status display [MENU] is also displayed on the camera’s operation panel. [EVF MENU] operation 1 Press and hold the <EVF MENU> button for at least two seconds. [EVF MENU] is displayed. [EVF MENU] list r [DISPLA Y SETUP] Item Description of settings [CONTRAST] Adjusts the contrast. [ − 32]?[...]

– 62 – Chapter 7 Viewnder — V iewnder status display False color mode Check the exposure using the false color . Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white. Display patterns Color Level Description T ype 1 T ype 2 (Red) 108.0% - 109.5% 93.6% - 94.7% White-leve[...]

– 63 – Chapter 7 Viewnder — Convenient shooting functions Convenient shooting functions Zebra patterns display The camera can display two types of zebra patterns. The level for zebra pattern display can be set in [MENU] → [VF SDI SETTINGS] → [ZEBRA]. Item Description of settings [ZEBRA MASTER SW] Sets whether to superimpose the zebra s[...]

– 64 – Chapter 7 Viewnder — Convenient shooting functions f In the expanded display , the status display and zebra pattern disappear . f Y ou can set the display mode in [MENU] → [VF SDI SETTINGS] → [ASSIST] → [EXP AND POS]/[EXP AND V ALUE]/[EXP AND MODE]. @ @ NOTE t The output video from the viewnder screen and <VF SDI> ter[...]

This chapter describes video output. Chapter 8 Output and Screen Display[...]

– 66 – Chapter 8 Output and Screen Display — SDI output SDI output Output format is set in [MENU] → [SYSTEM SETTINGS] → [SDI OUT]. One type of image is output from the four BNC terminals: <SDI OUT1> to <SDI OUT4>. If the setting does not require all four terminals, there may be terminals that do not provide output. If the outp[...]

– 67 – Chapter 8 Output and Screen Display — SDI output [SYSTEM MODE] [VFR SW] [SDI OUT] Output Format [FREQUENCY] [PIXEL] [MAIN CODEC] [P to PsF] [4K OUT TYPE] Signal Format [25.00p] [3840 × 2160] [A VC-Intra4K 422] [OFF] — [SQUARE] 3840 × 2160 25.00P 4:2:2 1.5G × 4 — [2 SAMPLE INT] 3840 × 2160 25.00P 4:2:2 3G × 2 [ON] — [SQUARE] [...]

– 68 – Chapter 8 Output and Screen Display — <MON OUT1> output <MON OUT1> output Output format is set in [MENU] → [SYSTEM SETTINGS] → [MON OUT]. Status display is set in [MENU] → [SYSTEM SETTINGS] → [MON OUT INDICA TOR]. Marker display is set in [MENU] → [SYSTEM SETTINGS] → [MON OUT MARKER]. Output format list [SYSTEM [...]

– 69 – Chapter 8 Output and Screen Display — <MON OUT2> output <MON OUT2> output Output format is set in [MENU] → [SYSTEM SETTINGS] → [MON OUT]. The setting details of the status display and marker display are the same as the details for the <MON OUT1> terminal. Each can be set to be displayed or hidden. f Output signal [...]

– 70 – Chapter 8 Output and Screen Display — <VF SDI> output <VF SDI> output This output outputs the same image as the viewnder display . Output format is set in [MENU] → [VF SDI SETTINGS] → [VF SDI DISPLA Y]. Status display is set in [MENU] → [VF SDI SETTINGS] → [INDICA TOR]. Marker display is set in [MENU] → [VF SDI[...]

– 71 – Chapter 8 Output and Screen Display — Screen status display Screen status display Status display (ST A TUS) in the <MON OUT1>, <MON OUT2>, and <VF SDI> outputs. WRN 4096 x 2160 23.98p I-2K422-200M I-2K422-100M M 999 S 999min TC 12:59:59:23 80.5% 120fps 180deg ISO12800 CC-15000K+10 99.9ft 1000.0mm ND 1.8 EX i-SHOT GPS [...]

– 72 – Chapter 8 Output and Screen Display — Screen status display Control panel status display (VIEW screen) 4096 x 2160 23.98p I-2K422-200M I-2K422-100M M 999 S 999min TC 12:59:59:23 120fps 180deg ISO12800 CC-15000K+10 99.9ft 1000.0mm ND 1.8 EX i-SHOT GPS +7STOP T1 1.0 PXY FULL 2 1 14 17 18 15 3 10 5 11 6 7 8 12 13 22 16 20 9 4 19 21 1 Card[...]

This chapter describes other useful features such as function buttons, etc. Chapter 9 Other Useful Functions[...]

– 74 – Chapter 9 Other Useful Functions — Getting position information using the GPS Getting position information using the GPS The camera has a built-in GPS. Positioning information can be recorded through GPS. The GPS antenna is placed on top of the camera module. When using the GPS function, do not cover the top of the camera module with m[...]

– 75 – Chapter 9 Other Useful Functions — Assigning functions to the USER buttons Assigning functions to the USER buttons Selected functions can be assigned to the USER buttons <1> to <4> and the control panel operation buttons. Set each function to be assigned to [USER1] to [USER10] in [MENU] → [SYSTEM SETTINGS] → [USER SWITC[...]

– 76 – Chapter 9 Other Useful Functions — Handling setting data Handling setting data Handling SD memory cards The SD memory card can be removed and inserted, either before or after the power is turned on. Inserting SD memory cards Fig. 1 Fig. 2 1 Open the slot cover . (Fig. 1) 2 Insert the SD memory card into the SD memory card slot with the[...]

– 77 – Chapter 9 Other Useful Functions — Setting the time data Setting the time data The camera provides time codes, user bits, and date and time (real time) data as time data, and they are recorded in the frame in sync with video. They are also recorded as data for clip metadata les. Denition of time data r Time code Y ou can switch t[...]

– 78 – Chapter 9 Other Useful Functions — Setting the time data Retention of user bits in memory User bit settings are automatically recorded and are retained even if the power is turned off. Frame rate information The relationship between frame rates, image pull-down, and time codes/user bits is as follows. ・ 60i ： 600 ・ 60P ： 608 ?[...]

– 79 – Chapter 9 Other Useful Functions — Setting the time data Reference time code <GENLOCK IN> terminal <TC IN/OUT> terminal Reference video signal External lock operation procedure T o externally lock the time code, follow the steps below . 1 Press the <TC> button to display the TC screen. 2 From the time code display , s[...]

– 80 – Chapter 9 Other Useful Functions — Setting the time data Connection example for supplying to external device r When locking external devices to the camera <TC IN/OUT> terminal <SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminal VIDEO IN terminal SDI IN terminal HD SDI IN terminal TC IN terminal VTR, etc. [...]

This chapter describes how to operate the camera menus, the structure, and details of the setting menu. Chapter 10 Menu Operations[...]

– 82 – Chapter 10 Menu Operations — Setting menu structure Setting menu structure Menu conguration The setting menu is congured as follows. [SYSTEM SETTINGS] Sets the system in general. Set the system frequency , the number of lines, recording format, and recording method. [CAMERA SETTINGS] Sets the ne quality adjustment of camera vi[...]

– 83 – Chapter 10 Menu Operations — Setting menu display Setting menu display Setting menu basic operations Y ou can change camera settings using the setting menu according to the shooting scene and recording details. Set data are written and saved in the internal memory of the camera. b a c a: <MENU> button b: <EXIT> button c: Jo[...]

– 84 – Chapter 10 Menu Operations — Menu list Menu list [SYSTEM SETTINGS] Sets the system in general. f is the extended menu. Set [MENU] → [CAMERA SETTINGS] → [Enhanced] → [Enhanced SW] to [ON] to display the extended menu. Item Description of settings [SYSTEM MODE] [FREQUENCY] Sets the system frequency . If the setting of this item is [...]

– 85 – Chapter 10 Menu Operations — Menu list Item Description of settings [MON 2] Sets the output image from the <MON OUT2> terminal. Selectable items vary depending on the [MAIN] setting. When [MAIN] is set to [V -Log] and [GRADING] is set to [ON] [V -Log]/[GRADING] When [MAIN] is set to [V -Log] and [GRADING] is set to [OFF] [V -Log][...]

– 86 – Chapter 10 Menu Operations — Menu list Item Description of settings [REAR2 LEVEL] Sets the level adjustment method of the rear microphone 2 to manual or automatic. [AUTO]: Adjust automatically . [MANUAL]: Enables manual adjustment. f Factory setting: [AUTO] [FRONT1 VR] Performs adjustments in this item when the level adjustment method [...]

– 87 – Chapter 10 Menu Operations — Menu list Item Description of settings [SDI OUT] [P to PsF] Sets the segment frame for the output from terminals <SDI OUT1> to <SDI OUT4>. This is enabled only when both of the following items are set. f When [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [FREQUENCY] is set to [29.97p], [23.[...]

– 88 – Chapter 10 Menu Operations — Menu list Item Description of settings [EXTENDER] Displays/hides the extender . [ON], [OFF] f Factory setting: [ON] [Y GET] Displays/hides brightness of Y GET . [ON], [OFF] f Factory setting: [ON] [TC] Displays/hides the time code, user bits, and duration counter displays. [TCG/TCR], [TCG], [OFF] f Factory [...]

– 89 – Chapter 10 Menu Operations — Menu list Item Description of settings [GENLOCK] [GENLOCK MODE] Switches the synchronization signal of the camera signal. [INT]: Synchronizes to the internal standard signal. [EXT]: Synchronizes to the entered external standard signal. f Factory setting: [INT] [H PHASE COARSE] Roughly adjusts to match horiz[...]

– 90 – Chapter 10 Menu Operations — Menu list Item Description of settings [USER7] Sets the function to be assigned to the control panel operation button. The control panel operation button functions as a USER button. Assign [SIX BUTTONS] to USER buttons <1> to <4>. [INHIBIT], [EXP AND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 C[...]

– 91 – Chapter 10 Menu Operations — Menu list Item Description of settings [CLOCK] [CLOCK SETTING] Sets the built-in calendar (year/month/day) and time. [YEAR]: [2014] - [2037] [MONTH]: [JAN]…[DEC] ([1]…[12]) [DA Y]: [1] - [31] ([28], [29], [30]) [HOUR]: [0] - [23] [MINUTE]: [0] - [59] [TIME ZONE] Set the time zone. After setting the time[...]

– 92 – Chapter 10 Menu Operations — Menu list Item Description of settings [SHOCKLESS WHITE] Sets the transition time when switching preset values. [OFF]: V alues are immediately switched. [1]: Switches in approximately one second. [2]: Switches in approximately two seconds. [3]: Switches in approximately ve seconds. f Factory setting: [OF[...]

– 93 – Chapter 10 Menu Operations — Menu list Item Description of settings [DET AIL] [SW] Enables/disables the detail function. [ON], [OFF] f Factory setting: [ON] [CORING] Sets the coring amount for the detail signal. [0] - [60] f Factory setting: [1] [MASTER LEVEL] Sets the effect level for the detail signal. [ − 31]…[31] f Factory sett[...]

– 94 – Chapter 10 Menu Operations — Menu list Item Description of settings [Mg-B (PHASE)] Corrects the hue between magenta and blue. [ − 63]…[63] f Factory setting: [0] [B (SA T)] Corrects blue color saturation. [ − 63]…[63] f Factory setting: [0] [B (PHASE)] Corrects the blue hue. [ − 63]…[63] f Factory setting: [0] [B-Cy (SA T)][...]

– 95 – Chapter 10 Menu Operations — Menu list Item Description of settings [A.IRIS WINDOW] Selects the auto iris detection window . [NORMAL1]: Window that is near screen center . [NORMAL2]: Window that is near screen bottom. [CENTER]: Window that is a spot in the screen center . f Factory setting: [NORMAL1] [A.IRIS PEAK/A VE] Sets the ratio i[...]

– 96 – Chapter 10 Menu Operations — Menu list Item Description of settings [USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME]. (When [RECORD] is [ON]) [TYPE1]: Records setting values of the loaded data. [TYPE2]: Records the loaded data and counter value. (When [RECORD] is [OFF]) [TYPE1]: Records the same value as [GLOBAL CLIP ID]. [...]

– 97 – Chapter 10 Menu Operations — Menu list Item Description of settings [INDICA TOR] [MASTER SW] Sets whether to display items that will be set by [INDICA TOR] in the output from the <VF> terminal and <VF SDI> terminal. [ON]: Items are individually displayed/hidden. [OFF]: Hides all. f Factory setting: [ON] [SYSTEM PIXEL] Displ[...]

– 98 – Chapter 10 Menu Operations — Menu list Item Description of settings [FOCUS SQUARES SW] Displays/hides the focus square function. [ON], [OFF] f Factory setting: [OFF] [EXP AND POS] Adjusts the source signal position in an enlarged display . [0]…[8] f Factory setting: [4] [EXP AND V ALUE] Adjusts the enlargement factor . [x2], [x3], [x[...]

– 99 – Chapter 10 Menu Operations — Menu operations Menu operations r Operation f UI: Settings can be performed using the control panel f SW: Settings can be performed using switches and buttons f VF: Settings can be performed using viewnder menu and buttons. f l : Items for operation. f —: Non-operation items. [SYSTEM SETTINGS] Item Ope[...]

– 100 – Chapter 10 Menu Operations — Menu operations Item Operation UI SW VF [ST A TUS] ——— [SDI OUT] [P to PsF] ——— [4K OUT TYPE] ——— [3G-SDI OUT] ——— [SDI REC REMOTE] ——— [MON OUT] [1080p to 1080i] ——— [3G-SDI OUT] ——— [MON OUT2 SIGNAL SEL] ——— [MON OUT1 ST A TUS] ——— [MON OUT2 ST A TUS][...]

– 101 – Chapter 10 Menu Operations — Menu operations Item Operation UI SW VF [USER4] — l — [USER5] — l — [USER6] — l — [USER7] — l — [USER8] — l — [USER9] — l — [USER10] — l — [BA TTERY] [BA TTERY SELECT] ——— [EXT DC IN SELECT] ——— [FULL Volt] ——— [NEAR END V olt] ——— [END V olt] ——— [[...]

– 102 – Chapter 10 Menu Operations — Menu operations Item Operation UI SW VF [SYNCHRO sec] lll [PRESET V ALUE deg] lll [PRESET V ALUE sec] lll [TEST SIG] [TEST SIG SEL] ——— [COLOR BARS TYPE] ——— [DET AIL] [SW] ——— [CORING] ——— [MASTER LEVEL] ——— [MA TRIX] [SW] ——— [(R-G)_N] ——— [(R-G)_P] ——— [(R[...]

– 103 – Chapter 10 Menu Operations — Menu operations [REC SETTINGS] Item Operation UI SW VF [FILE SPLIT] ——— [TC] [SET TC] l — — [SET UB] l — — [TC/UB/Dur .] l — — [FREE/REC RUN] l — — [DF/NDF] l — — [UB MODE] l — — [TC IN/OUT SEL] ——— [TC OUT] ——— [TC OUT REF] ——— [REC MET ADA T A] [LOAD] —?[...]

– 104 – Chapter 10 Menu Operations — Menu operations Item Operation UI SW VF [ADV ANCED ASSIST SW] — l l [PEAKING SW] ——— [FOCUS SQUARES SW] ——— [EXP AND POS] ——— [EXP AND V ALUE] ——— [EXP AND MODE] — l — [PEAKING] ——— [COLOR] ——— [MONO SW] ——— [FOCUS BAR SW] ——— [SURROUND VIEW] [VIEW SW] [...]

Inspect the various parts of the camera before shooting. Maintenance of the camera or frequently asked questions are also described in this chapter . Chapter 1 1 Maintenance and Inspection[...]

– 106 – Chapter 1 1 Maintenance and Inspection — Inspections before shooting Inspections before shooting Before shooting, perform the following inspections to ensure that the system operates properly . 1 Confirm that the assembled modules and the handles are fixed securely . 2 Mount the lens and adequately charged battery . 3 Insert an expres[...]

– 107 – Chapter 1 1 Maintenance and Inspection — Maintenance Maintenance Charging the built-in battery The camera uses the built-in battery to remember the date and time. If the camera is not turned on for more than a half year , the built-in battery runs out and when the <POWER> switch is turned <ON>, [BACK UP BA TT EMPTY] may be[...]

– 108 – Chapter 1 1 Maintenance and Inspection — Warning system W arning system If an error is detected immediately after the camera is turned on or during operation, the viewnder and warning lamp indicate the error . Deal with the error by following the indications. Cases indicated by error codes Error code Display Description Behavior an[...]

– 109 – Chapter 1 1 Maintenance and Inspection — Warning system Display Description Behavior and cause [PROXY REC W ARNING] A proxy data recording error occurred. f The current operation will continue. f T urn off the camera and turn on it again to check the recording and playback. If the error continues to occur , please consult your dealer [...]

– 1 10 – Chapter 1 1 Maintenance and Inspection — Warning system Display Description Behavior and cause [NO SD CARD!] No SD memory card. Insert an SD memory card. [NOT SELECTED!] Attempted to delete without selecting clips. Select clips to delete. [SAME CLIP IS SELECTED!] Multiple instances of the same clip (copies) are included in the clips [...]

– 111 – Chapter 1 1 Maintenance and Inspection — Updating the camera rmware Updating the camera rmware The rmware versions of the camera module and the recording module must match to operate this system. If they do not match, update the rmware before using the camera. Firmware of the camera module can be updated only when the reco[...]

– 1 12 – Chapter 1 1 Maintenance and Inspection — Cleaning and storing Cleaning and storing Cleaning the camera recorder f Either remove the battery or disconnect the DC cable from the power outlet before cleaning. f Do not use benzine or thinner to clean the camera. Using benzine or thinner may cause deformation or peeling off of the paint o[...]

This chapter describes the specications of this product. Chapter 12 Specication[...]

– 1 14 – Chapter 12 Specication — Specications Specications Dimensions REC 1 2 3 SHUTTER EI WB Optical Center 179 mm (7-1/16 inches) 61 mm (2-13/32 inches) 127.2 mm (5-1/32 inches) 287.7 mm (11-11/32 inches) 347 mm (13-11/16 inches) 230.5 mm (9-3/32 inches) 143 mm (5-21/32 inches) 88 mm (3-15/32 inches) 94 mm (3-23/32 inches) 111 mm [...]

– 1 15 – Chapter 12 Specication — Specications Camera unit Pickup device Super 35 mm, MOS, 8.9 megapixels Number of pixels f T otal number of pixels Approx. 10.3 million pixels f Number of effective pixels Approx. 8.9 million pixels Lens mount 35 mm, PL mount Optical lter f ND lter <1>: <CLEAR>, <2>: <0.6ND>[...]

– 1 16 – Chapter 12 Specication — Specications Proxy File format MOV Video compression format H.264/A VC High Prole Audio compression format LPCM Approximate recording time (1 GB) Approx. 25 min Reference value for continuous recording. The recording time may differ depending on the scene or the number of clips. Video input/output &l[...]

Index – 1 17 – Index A Assembly Camera module 22 Recording module 22 Shoulder mount module 2 4 Viewnder 23 Audio input Audio devices 5 5 Front microphone 5 4 Recording level adjustment 5 6 Signal selection 5 6 B Battery 27 Mounting 27 Setting 27 Built-in battery 107 C [CAMERA SETTINGS] 91 Center marker 6 3 Clock 31 Control panel 4 3 HOME scr[...]

Index – 1 18 – Z Zebra patterns 6 3[...]

Information for Users on Collection and Disposal of Old Equipment and used Batteries EU Cd EU These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used [...]