Français dropdown-ico

Pelco C1566M-C manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Pelco C1566M-C. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Pelco C1566M-C ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Pelco C1566M-C décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Pelco C1566M-C devrait contenir:
- informations sur les caractéristiques techniques du dispositif Pelco C1566M-C
- nom du fabricant et année de fabrication Pelco C1566M-C
- instructions d'utilisation, de réglage et d’entretien de l'équipement Pelco C1566M-C
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Pelco C1566M-C ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Pelco C1566M-C et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Pelco en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Pelco C1566M-C, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Pelco C1566M-C, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Pelco C1566M-C. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    ADDENDUM Pelco Worldwide Headquarters • 3500 Pelco W ay • Clovis, California 93612 USA • www .pelco.com USA & Canada •T el: 800/289-9100 • Fax: 800/289-9150 International •T el: 1-559/292-1981 • Fax: 1-559/348-1120 Addendum No. C1573M Date February 1, 2006 Manuals Affected C1572M, C1555M-F , C1566M-C Manual Update The front and re[...]

  • Page 2

    System 9760 ® V ideo Matrix Switching Control System INSTALLATION/OPERATION C1572M (9/05)[...]

  • Page 3

    [...]

  • Page 4

    C1572M (9/05) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 5

    4 C1572M (9/05) Setting and Adjusting System Time in a Single-Node System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Setting and Adjusting System Time in a Multi-Node System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 6

    C1572M (9/05) 5 List of Illustrations 1 Basic Components of a 9760 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 Mounting the CM9700-CC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 7

    6 C1572M (9/05) 60 ACD DB9 to CM9700-CC1 DB9 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 61 ACD DB9 to CM9700-CC1 RJ-45 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 8

    C1572M (9/05) 7 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install nea[...]

  • Page 9

    8 C1572M (9/05) Regulatory Notices CM9700-CC1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFE[...]

  • Page 10

    C1572M (9/05) 9 System Overview This section provides an overview of the System 9760 ® video matrix switching control system, hereinafter referred to simply as the 9760 system. The following information is provided: • Description of the basic components of the 9760 system • Summary listing of 9760 system device models and compatible equipment [...]

  • Page 11

    10 C1572M (9/05) Note the following: • To ensure uninterrupted operation, the 9760 system can be equipped with a backup CM9700-CC1 by means of a CM9760-HS hot switch. For detailed information about the CM9760-HS, refer to the CM9760-HS Hot Switch Installation/Operation manual. • The CM9700-NW1, commonly referred to as the network interface unit[...]

  • Page 12

    C1572M (9/05) 11 NETWORK INTERFACE UNIT CM9700-NW1 Network CPU and software necessary for joining two or more independent systems together . Allows multiple systems to share video and control. Commonly referred to as the network interface unit (NIU). OPTIONAL COMPONENTS CM9760-ALM Alarm interface unit. Connects directly to each system. Each unit ca[...]

  • Page 13

    12 C1572M (9/05) System Setup This section provides information about the following: • Overview of tasks necessary to set up a 9760 system • Unpacking the CM9700-CC1 controller and CM9760-MXB matrix bay • Installing the CM9700-CC1 controller • Installing CM9760-MXB matrix bay(s) • V erifying system operation SYSTEM SETUP OVERVIEW The foll[...]

  • Page 14

    C1572M (9/05) 13 UNPACKING V arious items are supplied with the CM9700-CC1 and with the CM9760-MXB. Refer to the Unpacking the CM9700-CC1 and Unpacking the CM9760-MXB sections for a list of items supplied with the units. UNPACKING THE CM9700-CC1 The following items are supplied with the CM9700-CC1: 1 CM9700-CC1 unit, with front rack ears installed [...]

  • Page 15

    14 C1572M (9/05) INSTALLING THE CM9700-CC1 CONTROLLER Installation of the CM9700-CC1 includes the following tasks: • Selecting a location for the CM9700-CC1 in a standard EIA rack • Mounting the CM9700-CC1 • Connecting the CM9700-CC1 • Powering on the CM9700-CC1 To perform each of the above tasks, refer to the sections that follow . SELECTI[...]

  • Page 16

    C1572M (9/05) 15 Figure 2. Mounting the CM9700-CC1 (4) SCREWS, 10-32 X 0.750-INCH PHILLIPS, P AN HEAD WITH W ASHERS CM9700-CC1 T APERED ENDS TOW ARDS REAR OF UNIT (6) SCREWS, 8-32 X 0.250-INCH PA N HEAD (3 EACH SIDE) BRACKET (SIDE VIEW) (4) SCREWS 10-32 X 0.375-INCH FLA T HEAD (6) SCREWS, 8-32 X 0.375-INCH PA N HEAD WITH WA SHERS (8) SCREWS, 10-32 [...]

  • Page 17

    16 C1572M (9/05) CONNECTING THE CM9700-CC1 System 9760 devices and other equipment connect to the rear panel of the CM9700-CC1 (refer to Figure 3). Figure 3. CM9700-CC1 Connections As illustrated in Figure 3, CM9700-CC1 connections include the following: • CM9700-MGR PC (RS-232 serial communication) • VGA monitor • PS/2 keyboard (supplied) ?[...]

  • Page 18

    C1572M (9/05) 17 Figure 4. CM9700-MGR PC to CM9700-CC1 Null Modem Cable Connections Connecting a VGA Monitor to the CM9700-CC1 When connected to the CM9700-CC1, a VGA monitor displays the CM9700-CC1 diagnostic screen (refer to Monitoring CM9700-CC1 Functions in the System Diagnostics section for detailed information about the CM9700-CC1 diagnostic [...]

  • Page 19

    18 C1572M (9/05) Using the System 9760 Port Assignment T able The System 9760 port assignment table, titled “System 9760 Factory Default Port Settings,” lists the CM9700-CC1 port numbers (1-36) and each device that has been assigned to a particular CM9700-CC1 port and configured for your system at the factory . Figure 5 illustrates a sample po[...]

  • Page 20

    C1572M (9/05) 19 In the sample port assignment table shown in Figure 5, note the following: • CM9700-CC1 port 1 (COM 1) is assigned and configured for the System Manager; therefore, the System Manager PC should be connected to COM 1 on the CM9700-CC1. • CM9700-CC1 port 2 (COM 2) is not assigned or configured for any device. • Because CM9700[...]

  • Page 21

    20 C1572M (9/05) NOTE: If you add matrix bays to an existing system, you may need to change existing port connections to be able to connect each additional matrix bay to the lowest sequential port possible. Connecting Power to the CM9700-CC1 To connect power to the CM9700-CC1, connect the supplied 120 VAC or 230 V AC power cord to the power input r[...]

  • Page 22

    C1572M (9/05) 21 POWERING ON THE CM9700-CC1 After all system devices have been connected to the CM9700-CC1 and all system devices have been powered on, power on the CM9700-CC1. To power on the unit, place the power switch in the On (I) position. If, for some reason, you must power off the unit, place the power switch in the Off (0) position. INSTAL[...]

  • Page 23

    22 C1572M (9/05) MOUNTING THE CM9760-MXB To mount a CM9760-MXB into a rack, install the CM9760-MXB into the desired location and secure the unit using the supplied mounting hardware (refer to Figure 6). Figure 6. Mounting the CM9760-MXB If you are mounting multiple matrix bays, note the following: • If you are installing a new system, be sure to [...]

  • Page 24

    C1572M (9/05) 23 Figure 7. Sample Downframe Cable Connections V ERIFYING CM9760-MXB COMPONENT INSTALLATION Up to 16 CM9760-VCC video input cards, one CM9760-VMC video output card, and up to two power supplies are installed in a matrix bay at the factory as ordered. V erify component installation as follows: 1. Remove the front panel of the matrix b[...]

  • Page 25

    24 C1572M (9/05) Removing the CM9760-MXB Front Panel To remove the front panel of the CM9760-MXB, loosen the eight captive panel screws indicated in Figure 8. Figure 8. CM9760-MXB Front Panel V erifying Input Card, Output Card, and Power Supply Installation The CM9760-MXB accepts up to 16 CM9760-VCC video input cards in slots 1-16, one CM9760-VMC c[...]

  • Page 26

    C1572M (9/05) 25 CONNECTING THE CM9760-MXB TO THE CM9700-CC1 Connect a CM9760-MXB to the CM9700-CC1 using the 10-foot (3.05 meters) reversed cable supplied with the CM9760-MXB. If you must create a longer cable, it is recommended that you use a 24-gauge twisted pair cable. As illustrated in Figure 10, connect the female RJ-45 serial communications [...]

  • Page 27

    26 C1572M (9/05) CONNECTING POWER TO THE CM9760-MXB NOTE: A CM9760-MXB operates on 120 V AC, 60 Hz. A CM9760-MXB-X operates on 230 VAC, 50 Hz. To connect power to a CM9760-MXB, plug the supplied power cord into the power input receptacle on the rear of the matrix bay for each power supply installed (refer to Figure 11). Then plug the power cord for[...]

  • Page 28

    C1572M (9/05) 27 2. With the front panel of the CM9760-MXB removed, check the LEDs on the CM9760-VCC video input cards and on the CM9760-VMC video output card as follows (refer to Figure 12): a. V erify that all +10 VDC and –10 VDC power LEDs are lit (green). If a power LED is not lit, remove the card and inspect the fuses (refer Figure 13 for fu[...]

  • Page 29

    28 C1572M (9/05) Figure 13. Fuse Locations on CM9760-VCC and CM9760-VMC Cards .7ASB FUSES .7ASB FUSES CM9760-VCC VIDEO INPUT CARD CM9760-VMC VIDEO OUTPUT CARD[...]

  • Page 30

    C1572M (9/05) 29 CONNECTING VIDEO INPUTS AND V IDEO OUTPUTS Connect all video inputs (up to 256) and all video outputs (up to 16) to the rear panel BNC cards (refer to Figure 14). Figure 14. CM9760-MXB Video Input and Output Connections Note the following: • To provide adequate ground and signal connections, use crimp-on BNCs rather than screw-on[...]

  • Page 31

    30 C1572M (9/05) V ERIFYING SYSTEM OPERATION After installation of the 9760 system is complete, verify system operation. T o do so, perform the following from a CM9760-KBD: 1. V erify that the CM9760-KBD LCD displays the following: SYSTEM 97XX 2. Enter the default operator password on the CM9760-KBD keypad: The default password for operator 1 is 01[...]

  • Page 32

    C1572M (9/05) 31 CM9700-CC1 Component Installation or Replacement REMOVING THE CM9700-CC1 T OP COVER To remove the top cover of the CM9700-CC1, refer to Figure 15 and do the following: 1. Power off the CM9700-CC1. 2. Remove the ten screws that hold the top cover in place. 3. T ilt the top cover up at a slight angle as indicated by the dotted line i[...]

  • Page 33

    32 C1572M (9/05) INSTALLING OR REPLACING A CM9700-SER CARD The CM9700-CC1 is shipped from the factory with a minimum of two CM9700-SER cards installed on the motherboard in ISA slots 1 and 2 (refer to Figure 16). Y ou can install additional CM9700-SER cards into ISA slots 3 and 4, totaling a maximum of four cards. Y ou can also replace an existing [...]

  • Page 34

    C1572M (9/05) 33 Figure 17. Sample CM9700-SER Card Jumper Assignments 5. Install the new CM9700-SER card into the desired slot. 6. Reattach the front cover of the CM9700-CC1. 7. Power on the CM9700-CC1. Note the following: • Y ou can cycle through the IRQ/address settings by toggling the AL T+A key combination on the PC keyboard associated with t[...]

  • Page 35

    34 C1572M (9/05) CM9760-MXB Component Installation or Replacement This section provides information about the following: • Installing or replacing rear panel cards (CM9760-RPC, CM9760-RPL, CM9760-DFC, CM9760-DFL, and CM9760-RPM) • Installing or replacing a CM9760-VCC video input card • Installing or replacing a CM9760-VMC video output card ?[...]

  • Page 36

    C1572M (9/05) 35 4. Slide the new card into the card guides (refer to Figure 19). 5. Push the card into place firmly . 6. T ighten the screw at the top and bottom of the card. 7. Connect BNC and downframe cables as applicable. Figure 18. T ermination Jumpers on CM9760-RPC Rear Panel Input Card Figure 19. CM9760-RPC Rear Panel Input Card Installati[...]

  • Page 37

    36 C1572M (9/05) Replacing a CM9760-RPC Card NOTE: Before replacing a CM9760-RPC card, you must remove the front panel of the matrix bay and disconnect the associated CM9760-VCC video input card from the connectors on the backplane and from the connector on the CM9760-RPC card that is to be replaced. T o disconnect the CM9760-VCC card, grasp the tw[...]

  • Page 38

    C1572M (9/05) 37 INSTALLING OR REPLACING A CM9760-RPL REAR PANEL LOOPING CARD The CM9760-RPL rear panel looping card contains two rows of BNC connectors and therefore occupies two slot positions in the matrix bay . The CM9760-RPL card connects to one CM9760-VCC video input card, which is installed into the front of the matrix bay. Up to eig ht CM97[...]

  • Page 39

    38 C1572M (9/05) 3. Remove the blank cover plate by loosening the screw at the top and bottom of the plate. 4. Slide the new card into the card guides (refer to Figure 21). Figure 21. CM9760-RPL Rear Panel Looping Card Installation 5. Push the card into place firmly . 6. T ighten the two screws at the top and bottom of the card. 7. Connect BNC and[...]

  • Page 40

    C1572M (9/05) 39 INSTALLING OR REPLACING A CM9760-DFC DOWNFRAME CARD The CM9760-DFC card is installed in every bay between the first and last bays in a downframe configuration. The card can also be used in the last bay if looping is not required. Up to 16 CM9760-DFC cards can be installed into 16 possible slot positions that are associated with t[...]

  • Page 41

    40 C1572M (9/05) Figure 23. CM9760-DFC Downframe Card Installation 5. Push the card into place firmly . 6. T ighten the screw at the top and bottom of the card. 7. Connect downframe cables as applicable. Replacing a CM9760-DFC Card NOTE: Before replacing a CM9760-DFC card, you must remove the front panel of the matrix bay and disconnect the associ[...]

  • Page 42

    C1572M (9/05) 41 INSTALLING OR REPLACING A CM9760-DFL DOWNFRAME LOOPING CARD The CM9760-DFL downframe looping card is used in the last bay in a downframe configuration. Note the following: • In a CM9760-MXB(-X), the CM9760-DFL card connects to a CM9760-VCC video input card, which is installed into the front of the matrix bay . Up to 16 CM9760-DF[...]

  • Page 43

    42 C1572M (9/05) 4. Slide the new card into the card guides (refer to Figure 25). Figure 25. CM9760-DFL Downframe Looping Card Installation 5. Push the card into place firmly . 6. T ighten the screw at the top and bottom of the card. 7. Connect BNC and downframe cables as applicable. Replacing a CM9760-DFL Card NOTE: Before replacing a CM9760-DFL [...]

  • Page 44

    C1572M (9/05) 43 INSTALLING OR REPLACING A CM9760-RPM REAR PANEL OUTPUT CARD Only one CM9760-RPM card can be installed into the rear of the matrix bay . The card must always be installed into the leftmost slot. From the rear of the bay , the leftmost slot provides the connection point for the CM9760-VMC video output card, which is always installed [...]

  • Page 45

    44 C1572M (9/05) Figure 27. CM9760-RPM Rear Panel Output Card Installation 5. Push the card into place firmly . 6. T ighten the screw at the top and bottom of the card. 7. Connect BNC cables (or ribbon cable, if applicable). Replacing a CM9760-RPM Card NOTE: Before replacing a CM9760-RPM card, you must remove the front panel of the matrix bay and [...]

  • Page 46

    C1572M (9/05) 45 INSTALLING OR REPLACING A CM9760-VCC VIDEO INPUT CARD CM9760-VCC video input cards are installed into the front of the matrix bay behind the front panel. For an initial system installation, the cards are installed at the factory as ordered. CM9760-VCC cards (and associated rear panel cards) can be added to expand a system or can be[...]

  • Page 47

    46 C1572M (9/05) To install a CM9760-VCC card, do the following: 1. Remove the front panel of the matrix bay . 2. Insert the CM9760-VCC card into the desired slot (slots 1-16) as follows (refer to Figure 28): a. Align the top and bottom edges of the card with the top and bottom card guides of the matrix bay . b. Slide the card toward the rear of th[...]

  • Page 48

    C1572M (9/05) 47 REPLACING A CM9760-VCC CARD To replace a CM9760-VCC card, do the following: 1. Remove the front panel of the matrix bay . 2. Remove the CM9760-VCC card to be replaced by grasping the two card handles and firmly pulling the card out of the connectors on the backplane and associated rear panel card. The card slides out of the slot. [...]

  • Page 49

    48 C1572M (9/05) INSTALLING OR REPLACING A CM9760-VMC VIDEO OUTPUT CARD One CM9760-VMC4, CM9760-VMC8, CM9760-VMC12, or CM9760-VMC16 video output card can be installed in the CM9760-MXB. For an initia l system installation, the CM9760-VMC card is installed at the factory as ordered. If additional matrix bays are ordered to expand an existing system,[...]

  • Page 50

    C1572M (9/05) 49 To install a CM9760-VMC card, do the following: 1. Remove the front panel of the matrix bay . 2. Remove the blank cover plate of slot 17 by loosening the screw at the top and bottom of the plate. 3. Set the S2 DIP switch and the X55 and JP2 jumpers on the new card to be installed: a. Refer to Figure 29 for DIP switch and jumper loc[...]

  • Page 51

    50 C1572M (9/05) T able G. S2 DIP Switch Functions and Settings Function Options Switch Setting Baud Rate 2400 1 Off 2 Off 4800 1 Off 2O n 9600 1O n 2 Off 19200 1O n 2O n Video Standard NTSC* 3 Off P AL* 3 On Video Loss Detection Enabled 4 On Disabled (default) 4 Off *X55 jumper must also be set (refer to T able H). T able H. X55 Video Standards an[...]

  • Page 52

    C1572M (9/05) 51 4. Install the new card into slot 17 of the matrix bay as follows (refer to Figure 30): a. Align the top and bottom edges of the card with the top and bottom card guides of the matrix bay . b. Slide the card toward the rear of the matrix bay until the card is seated firmly with the connectors on the backplane and with the associat[...]

  • Page 53

    52 C1572M (9/05) REPLACING A CM9760-VMC CARD Before replacing a CM9760-VMC card, note the following: • The CM9760-RPM card can be replaced while the matrix bay is powered on. • When installed in the matrix bay at the factory according to your system order , the S2 DIP switch and X55 and JP2 jumper settings on the CM9760-RPM card are set in the [...]

  • Page 54

    C1572M (9/05) 53 INSTALLING OR REPLACING A POWER SUPPLY Unless a backup power supply is ordered with the matrix bay , the unit is shipped from the factory with one power supply installed. A backup power supply can be added to the matrix bay to provide power redundancy to the unit. If necessary , a power supply can be replaced. Note the following: ?[...]

  • Page 55

    54 C1572M (9/05) REPLACING A POWER SUPPLY To replace a power supply , do the following: 1. Remove the power supply to be replaced as follows: a. Place the power switch in the Off (0) position. b. Disconnect the power cord from the power source. c. Remove the power supply from the power supply slot as follows: (1) Loosen the two captive panel screws[...]

  • Page 56

    C1572M (9/05) 55 REPLACING A POWER SUPPLY FUSE The rear of the matrix bay provides a separate power input receptacle for each power supply . Each power input receptacle is equipped with a fuse holder (refer to Figure 33). Each fuse holder provides a spare fuse to be used when replacing a blown fuse. To replace the fuse in a power supply , do the fo[...]

  • Page 57

    56 C1572M (9/05) ENABLING/DISABLING THE POWER SUPPLY ALARM The power supply provides an audible alarm that operates in conjunction with the Fault LEDs located on the front of the power supply . By default, the alarm is enabled. The X5 jumper on the power supply allows you to enable/disable the alarm (refer to Figure 34). To enable/disable the audib[...]

  • Page 58

    C1572M (9/05) 57 System Programming Using DOS The CM9700-CC1 runs under Microsoft ® DOS (Disk Operating System) 6.22, referred to as MS-DOS ® 6.22 and also commonly referred to simply as DOS. This section provides information about the following: • System 9760 programming tasks that are performed using DOS operations • DOS filename conventio[...]

  • Page 59

    58 C1572M (9/05) SETTING AND ADJUSTING SYSTEM T IME IN A SINGLE-NODE SYSTEM Y ou can set system time in a single-node system using the PC keyboard that is connected to the A T -compatible keyboard port of the CM9700-CC1. Using the CM9700-CC1 PC keyboard, you can also adjust system time if the system clock is running fast (system lead time) or slow [...]

  • Page 60

    C1572M (9/05) 59 Adjusting System T ime in a Single-Node System To adjust system time in a single-node system, do the following: 1. Wait 24 hours—or a multiple of 24 hours if necessary—since the system time was set, and then compare the system time displayed on any monitor in the system with the RTC time. Note the difference in time for a 24-ho[...]

  • Page 61

    60 C1572M (9/05) NOTE: The time adjustment that was made to system time as displayed in step 6 above is a temporary time adjustment. If you reboot the CM9700-CC1 by pressing Ctrl+Alt+Del or exit the 9760 system by pressing Ctrl+Q, the time adjustment reverts to 0:0.0. As a result, you must edit the startup.bat file to permanently program the total[...]

  • Page 62

    C1572M (9/05) 61 Editing the Startup.bat File to Permanently Adjust System T ime To permanently adjust system time, you must edit the startup.bat file to include the total time adjustment indicated in the System box after the final adjustment is made to system time. T o edit the startup.bat file to include the total time adjustment, do the follo[...]

  • Page 63

    62 C1572M (9/05) SETTING AND ADJUSTING SYSTEM T IME IN A MULTI-NODE SYSTEM Y ou can set system time in a multi-node system using the PC keyboard that is connected to the A T -compatible keyboard port of the CM9700-NW1. The CM9700-NW1 then provides system timing to the network. Using the CM9700-NW1 PC keyboard, you can also adjust system time if the[...]

  • Page 64

    C1572M (9/05) 63 Adjusting System T ime in a Multi-Node System To adjust system time in a multi-node system, do the following: 1. Wait 24 hours—or a multiple of 24 hours if necessary—since the system time was set, and then compare the system time displayed on any monitor in the system with the RTC time. Note the difference in time for a 24-hour[...]

  • Page 65

    64 C1572M (9/05) 5. Press Enter . The adjustment is displayed. For example, for the adjustment of –02.30.00 that was made in step 4, the following line appears: Last Adj. –2:30.0 T otal –2.30.0 where: Last Adj. displays the last time adjustment that was made in minutes, seconds, and hundredths of a second. In the example, the last adjustment [...]

  • Page 66

    C1572M (9/05) 65 Making Additional Adjustments to System T ime To make an additional adjustment to system time, do the following: 1. Wait 24 hours—or a multiple of 24 hours if necessary—since the last time adjustment was made, and then compare the system time displayed on any monitor in the system with the RTC time. Note the difference in time [...]

  • Page 67

    66 C1572M (9/05) Editing the Net.bat File to Permanently Adjust System T ime To permanently adjust system time, you must edit the net.bat file to include the total time adjustment indicated on the diagnostic screen after the final adjustment is made to system time. T o edit the net.bat file to include the total time adjustment, do the following:[...]

  • Page 68

    C1572M (9/05) 67 DOS FILENAME CONVENTIONS The naming convention for a DOS filename is a root name followed by a period followed by an extension: • The root name is limited to eight characters with no spaces. • The extension is three characters. For example, if the filename is NODE1.CAM, the root name is NODE1 and the extension is CAM. The fol[...]

  • Page 69

    68 C1572M (9/05) Directory Management Commands (Continued) DIR (Continued) /P Displays the contents of a directory one screen at a time. C:>DIR/P Displays the contents of the root directory one screen at a time. /W/P Combines /W and /P switches to display the contents of a directory in wide format one screen at a time. C:>DIR/W/P Displays t[...]

  • Page 70

    C1572M (9/05) 69 File and Disk Management Commands (Continued) DEL Deletes a single file or a group of files from the specified location. NOTE: Y ou can restore deleted files using the UNDELETE command. WARNING: Be careful that you do not delete necessary system or configuration files. C:>DEL C:9700OLDFILE.MON Deletes the OLDFILE.MON ?[...]

  • Page 71

    70 C1572M (9/05) File and Disk Management Commands (Continued) TYPE Displays the contents of the specified text file on the screen. If the loca- tion of the file is in a directory other than the one you are in, you must specify the directory path. C:9700>TYPE NODE1.MON Displays the contents of the NODE1.MON file located in the C:9700 direc[...]

  • Page 72

    C1572M (9/05) 71 Miscellaneous Commands (Continued) FASTHELP command Briefly describes the specified command. Provides less detail than the information provided by HELP command (see below). C:FASTHELP DIR Displays brief information about the DIR command. HELP Starts the MS-DOS command reference, which provides detailed information about MS-DOS c[...]

  • Page 73

    72 C1572M (9/05) System Diagnostics The 9760 system provides diagnostic screens that allow you to monitor single-node and multi-node status. This section provides information about the following: • Monitoring CM9700-CC1 functions using the CM9700-CC1 diagnostic screen and associated PC keyboard commands • Viewing multi-node system status using [...]

  • Page 74

    C1572M (9/05) 73 VIEWING MONITOR BOX DIAGNOSTICS The monitor box on the CM9700-CC1 diagnostic screen provides information about the monitor , camera, auxiliary conditions, and alarms currently being displayed. Refer to Figure 36 for a sample monitor box. Figure 36. Sample Monitor Box on CM9700-CC1 Diagnostic Screen As illustrated in Figure 36, a mo[...]

  • Page 75

    74 C1572M (9/05) ALLOCATING MONITORS TO MONITOR BOXES When the diagnostic screen appears on the VGA monitor after the CM9700-CC1 is initialized, the first eight monitors are displayed in the eight monitor boxes. Using the PC keyboard connected to the A T -compatible keyboard port of the CM9700-CC1, you can allocate a different monitor to a monitor[...]

  • Page 76

    C1572M (9/05) 75 ENTERING CM9700-CC1 PC KEYBOARD COMMANDS Using the PC keyboard connected to the A T -compatible keyboard port of the CM9700-CC1, you can enter commands to perform certain functions or to obtain system status information in the System box on the diagnostic screen. Refer to T able J for a list of CM9700-CC1 functions and associated P[...]

  • Page 77

    76 C1572M (9/05) T oggle system error printing on/off Alt+R System Error Print ON or System Error Print OFF NOTE: Printer port is reserved for future use. T oggle system synchronization diagnostic trap on/off Alt+T Resynch T rap Offline or Resynch T rap Online T oggle system diagnostics on/off. When system diag- nostics is off, the diagnostic scre[...]

  • Page 78

    C1572M (9/05) 77 VIEWING MULTI-NODE SYSTEM STATUS The CM9700-NW1 provides a diagnostic screen that displays multi-node system status during the initialization of the CM9700-NW1 and any changes in system status that occur after the initialization process. Refer to Figure 37 for a sample CM9700-NW1 diagnostic screen. Figure 37. Sample CM9700-NW1 Diag[...]

  • Page 79

    78 C1572M (9/05) ENTERING CM9700-NW1 PC KEYBOARD COMMANDS Using the keyboard connected to the A T -compatible keyboard port of the CM9700-NW1, you can enter commands to perform certain functions. Refer to T able K for a list of CM9700-NW1 functions and associated keyboard commands. T able K. CM9700-NW1 PC Keyboard Command Functions Function Keyboar[...]

  • Page 80

    C1572M (9/05) 79 T roubleshooting This section provides the following troubleshooting information for the 9760 system: • General troubleshooting guidelines • CM9700-CC1 hardware and system error troubleshooting • CM9760-MXB troubleshooting using the CM9760-MXB LEDs For additional troubleshooting information relating to other 9760 system devic[...]

  • Page 81

    80 C1572M (9/05) T able M. CM9700-CC1 System Error T roubleshooting System Error Message Possible Cause Corrective Action Port x ERR Coms Framing Mismatched baud rate settings Correct the baud rate setting in the CM9700-MGR to match the settings in the device connected to the specified port. Port x ERR Coms Fatal Failure of communications line aft[...]

  • Page 82

    C1572M (9/05) 81 T ROUBLESHOOTING THE CM9760-MXB If a problem exists with the matrix bay , reset operation of the unit by pressing the Reset button located on the front of the CM9760-VMC video output card. All information, such as camera and monitor idents, is reloaded from the CM9700-CC1. If the problem still exists, refer to T able N for addition[...]

  • Page 83

    82 C1572M (9/05) CM9700-CC1 Controller This section provides detailed information about the CM9700-CC1. The following information is provided: • Description of the functions of the CM9700-CC1 • Front and rear views of the CM9700-CC1 • Description of the DOS directory structure of the CM9700-CC1 NOTE: For CM9700-CC1 installation information, r[...]

  • Page 84

    C1572M (9/05) 83 FRONT VIEW Figure 38 illustrates the front of the CM9700-CC1. Figure 38. CM9700-CC1 Front View Note the following: • The door of the CM9700-CC1 is secured by a Phillips-head screw on the knob. T o open the door , loosen the screw on the knob. • In addition to the A T -compatible keyboard port on the front of the CM9700-CC1, ano[...]

  • Page 85

    84 C1572M (9/05) REAR VIEW Figure 39 illustrates the rear of the CM9700-CC1. Figure 39. CM9700-CC1 Rear View As illustrated in Figure 39, the rear of the CM9700-CC1 includes the following: • Printer port: Female DB25 connector (reserved for future use) • Physical ports 1-2 and 5-36: – COM 1 (port 1) and COM 2 (port 2): Male DB9 connectors for[...]

  • Page 86

    C1572M (9/05) 85 Figure 40. CM9700-CC1 Rear Connector Pinouts PIN 5 PIN 9 PIN 1 PIN 6 COM 1 (MALE) PIN 1 PIN 8 PIN 15 PIN 5 PIN 10 PIN 11 PIN 1 PIN 6 VGA PORT (FEMALE) PIN 1 TX- PIN 2 TX+ SERCOM PORT D PIN 1 PIN 1 PIN 4 PIN 2 PIN 3 PIN 5 PIN 14 PIN 1 = KEYBOARD CLOCK PIN 2 = KEYBOARD DA T A PIN 3 = NOT USED PIN 4 = GND PIN 5 = +5V PIN 13 PIN 25 NOT[...]

  • Page 87

    86 C1572M (9/05) DIRECTORY STRUCTURE The directory structure of the CM9700-CC1 consists of the C: root directory , which contains several subdirectories and files. Y ou can view the contents of the root directory by entering dir and then pressing Enter at the C: prompt (refer to Figure 41). Figure 41. CM9700-CC1 Root Directory NOTE: The number o[...]

  • Page 88

    C1572M (9/05) 87 9700 DIRECTORY The 9700 directory is the working directory of the CM9700-CC1. From the root directory , you can navigate to the 9700 directory by entering cd 9700 and then pressing Enter . The C:9700 prompt appears. To view the contents of the 9700 directory , enter dir and then press Enter (refer to Figure 41). Figure 42. CM9700-[...]

  • Page 89

    88 C1572M (9/05) TESTPORT DIRECTORY The TESTPORT directory contains files that can be used to test whether the RJ-45 communication ports on the rear of the CM9700-CC1 are functioning. From the root directory , you can change to the TESTPORT directory by entering cd testport and then pressing Enter . The C:TESTPORT prompt appears. To view the cont[...]

  • Page 90

    C1572M (9/05) 89 CM9760-MXB Matrix Bay This section provides detailed information about the CM9760-MXB. The following information is provided: • Description of the functions of the CM9760-MXB • Front and rear views of the CM9760-MXB • Description of the CM9760-VCC video input card and CM9760-VMC video output card, which are installed into the[...]

  • Page 91

    90 C1572M (9/05) Figure 44. Video Signal Flow through the Matrix Bay As illustrated in Figure 44, a video signal enters the matrix bay through the rear panel input card where it is terminated with 75 ohms. The signal then proceeds to the CM9760-VCC video input card via the input buffer and is then directed to the 16 x 16 crosspoint switch. Operatio[...]

  • Page 92

    C1572M (9/05) 91 FRONT VIEW Figure 45 illustrates the CM9760-MXB with the front panel removed. Figure 45. CM9760-MXB Front View (Front Panel Removed) As illustrated in Figure 45, the front of the matrix bay accommodates the following: • Up to 16 CM9760-VCC video input cards in slots 1-16. For detailed information about CM9760-VCC cards, refer to [...]

  • Page 93

    92 C1572M (9/05) As illustrated in Figure 46, the rear of the matrix bay in a single-bay configuration accommodates the following: • Up to 16 CM9760-RPC rear panel input cards, providing connection to up to 256 video inputs. For additional information about CM 9760-RPC cards, refer to the CM9760-RPC Rear Panel Input Card section. Note that CM976[...]

  • Page 94

    C1572M (9/05) 93 VIDEO INPUT AND OUTPUT CARDS The CM9760-MXB accommodates up to 16 CM9760-VCC video input cards and one CM9760-VMC video output card. The cards are installed into the front of the matrix bay (behind the front panel). CM9760-VCC VIDEO INPUT CARD The CM9760-VCC video input card (refer to Figure 48) accepts up to 16 video input signals[...]

  • Page 95

    94 C1572M (9/05) CM9760-VMC VIDEO OUTPUT CARD The CM9760-VMC video output card (refer to Figure 49) routes up to 16 video signals from the video bus, adds idents (if applicable), and routes the signals to video outputs (for example, monitors). The CM9760-VMC card contains up to 16 CM9760-VMM video output modules—each of which provides one video o[...]

  • Page 96

    C1572M (9/05) 95 CM9760-VMC Card Guidelines The following guidelines apply to the CM9760-VMC card: • The CM9760-VMC card must be installed into slot 17 in the front of the matrix bay . The matrix bay is shipped from the factory with the card installed in the unit according to the system order . • The CM9760-VMC card connects to the CM9760-RPM c[...]

  • Page 97

    96 C1572M (9/05) As illustrated in Figure 50, the CM9760-RPC card includes the following: • BNC Connectors (16): Provide the physical connection point for coaxial cable • T ermination Jumpers JP1-JP16: Determine whether video is to be terminated (jumper positions 1 and 2) or unterminated (jumper positions 2 and 3): – In a single-bay configura[...]

  • Page 98

    C1572M (9/05) 97 Figure 51. CM9760-RPL Rear Panel Looping Card As illustrated in Figure 51, the CM9760-RPL card includes the following: • BNC Connectors (16 pairs): Provide the physical connection point for coaxial cable. For each pair of BNC connectors, one connector connects to a video source and the other connector connects to the video output[...]

  • Page 99

    98 C1572M (9/05) CM9760-RPM REAR PANEL OUTPUT CARD The CM9760-RPM rear panel output card (refer to Figure 52) passes up to 16 video signals from the CM9760-VMC video output card to video output devices such as monitors, VCRs, and matrix switchers. The CM9760-RPM card provides 16 BNCs that connect to video output devices. Figure 52. CM9760-RPM Rear [...]

  • Page 100

    C1572M (9/05) 99 CM9760-DFC REAR PANEL DOWNFRAME CARD The CM9760-DFC rear panel card (refer to Figure 53) is used in a downframe configuration. The card is installed in every bay between the first and last bay to connect the associated intermediate bays. The card can also be used in the last bay if looping is not required. NOTE: Unlike the CM9760[...]

  • Page 101

    100 C1572M (9/05) CM9760-DFL REAR PANEL DOWNFRAME LOOPING CARD The CM9760-DFL rear panel card (refer to Figure 54) is used in the last CM9760-MXB(-X) or CM9760-MXBL bay in a downframe configuration. The CM9760-DFL card provides the capability to loop out video—the card provides 16 BNCs that can connect to video output devices such as monitors, V[...]

  • Page 102

    C1572M (9/05) 101 CM9760-DFL Card Guidelines The following guidelines apply to the CM9760-DFL card: • When used in the CM9760-MXB(-X), note the following: – Up to 16 CM9760-DFL cards can be inserted into 16 possible slot positions that are associated with the slot positions of the corresponding CM9760-VCC cards. – The CM9760-DFL card must be [...]

  • Page 103

    102 C1572M (9/05) SIDEFRAMING AND DOWNFRAMING Sideframing, downframing, or a combination of both sideframing and downframing is required for installation of multiple matrix bays in a 9760 system: • When expanding video inputs beyond 256 as provided by a single matrix bay , the expansion of video inputs occurs in a horizontal manner using a sidefr[...]

  • Page 104

    C1572M (9/05) 103 SIDEFRAMING If more than 256 video inputs are required, multiple matrix bays must be installed in a sideframe configuration. Sideframing allows the video outputs of a bay to be connected to the video inputs of another bay to which the video output devices (for example, monitors, VCRs, and so on) are connected. The bay to which th[...]

  • Page 105

    104 C1572M (9/05) Note the following: • In an initial system installation, multiple matrix bays are labeled to identify the location of the sideframed bays in the installation, for example, 2A, 12A, 22A, and so on. Figure 56 illustrates a two-bay configuration in which bay 12A (output bay) is sideframed to bay 2A (bay 1). For additional examples[...]

  • Page 106

    C1572M (9/05) 105 DOWNFRAMING If more than 16 video outputs are required, multiple matrix bays must be installed in a downframe configuration. Downframing allows the video inputs of one bay to be connected to the video inputs of one or more additional bays, providing an additional 16 video outputs for each additional bay that is downframed. The in[...]

  • Page 107

    106 C1572M (9/05) Note the following: • In a new system installation, multiple matrix bays are labeled to identify the location of the downframed bays in the installation, for example, 2A, 2B, 2C, and so on. Figure 57 illustrates a two-bay configuration in which bay 2A (bay 1) is downframed to bay 2B (bay 2). For additional examples of downframe[...]

  • Page 108

    C1572M (9/05) 107 USING A COMBINATION OF SIDEFRAMING AND DOWNFRAMING When expanding video inputs beyond 256 and video outputs beyond 16, a combination of sideframing and downframing must be used. Sideframing allows video inputs to be expanded beyond 256. Downframing allows video outputs to be expanded beyond 16. The maximum capacity of a single-nod[...]

  • Page 109

    108 C1572M (9/05) DOWNFRAMING TO THE CM9760-MXBL When more than 128 video inputs and a maximum of 16 video outputs are required in a system that also requires looping, the CM9760-MXBL must be used to loop out the video. The CM9760-MXBL is a downframed matrix bay that does not require power . The CM9760-MXBL accommodates up to sixteen CM9760-DFL car[...]

  • Page 110

    C1572M (9/05) 109 Specifications CM9700-CC1 SPECIFICATIONS ELECTRICAL Input V oltage 120 V AC, 60 Hz or 230 VAC, 50 Hz, autoranging Power Consumption 57 watts Processor Pentium ® class CPU Clock Speed 733 MHz Memory 64 MB RAM Disk Drive 3.5-inch, 1.44 MB Flash Disk Storage 32 MB solid-state flash memory Diagnostic Monitor Output One VGA I/O Port[...]

  • Page 111

    110 C1572M (9/05) Appendix A. CM9700-CC1 ASCII Protocol Communication The CM9700-CC1 provides support of ASCII communication. ASCII data ports, referred to as IDT ports on the CM9700-CC1, interface to ASCII communication devices (ACDs) such as access control systems. NOTE: When operating in ASCII mode, the KBD200A and KBD300A keyboards can interfac[...]

  • Page 112

    C1572M (9/05) 111 CONNECTING AN ACD DB9 PORT TO A CM9700-CC1 RJ-45 PORT To connect an ACD DB9 port to a CM9700-CC1 RJ-45 port, refer to Figure 61 and do the following: 1. Connect the 9-pin side of the PV140 converter to a DB9 port of the ACD. 2. If necessary , connect the +12 VDC power supply to the PV140 converter; otherwise, proceed to step 3. (T[...]

  • Page 113

    112 C1572M (9/05) ASCII PROTOCOL COMMANDS SUPPORTED BY THE CM9700-CC1 The ASCII protocol consists of a basic ASCII character set used to transmit and receive commands between an ASCII communication device (ACD) and the CM9700-CC1. Each command is identified by an ASCII character . Commands that require a numeric value must transmit the ASCII repre[...]

  • Page 114

    C1572M (9/05) 113 T able O. ASCII Command Summary Action Command* Action Command* Pan and T ilt Commands Pan Left Stop Pan Left [1-64]La ~La T ilt Up Stop T ilt Up [1-63]Ua ~Ua Pan Right Stop Pan Right [1-64]Ra ~Ra T ilt Down Stop T ilt Down [1-63]Da ~Da Stop All PTZ Motion sa Camera Control Commands Focus Near Stop Focus Near Na ~Na Zoom T elephot[...]

  • Page 115

    114 C1572M (9/05) Matrix Control Commands Select Monitor [1-9999]Ma Lock Camera to Monitor Unlock Camera from Monitor Ga ~Ga Select Camera [1-999999]#a Override Camera-to-Monitor Lock oa Next Camera +a Previous Camera –a Multiplexer Commands Digital Zoom ym Scene Movement Using Joystick or Cursor Keys: Left, Stop Left Right, Stop Right Up, Stop U[...]

  • Page 116

    C1572M (9/05) 115 T able P . ASCII Command Descriptions Action Command* Command Description Pan and T ilt Commands Pan Left [1-64]La Moves the currently selected pan and tilt device to the left at the speed indicated. The speed ranges from 1-64: 1 is the slowest speed and 64 activates T urbo mode. Note the following: • If the speed is omitted, so[...]

  • Page 117

    116 C1572M (9/05) Camera Control Commands Focus Near Na Causes the currently selected camera to adjust the focus range nearer to the camera. Stop Focus Near ~Na Stops the focusing of the currently selected camera. Focus Far Fa Causes the currently selected camera to adjust the focus range farther from the camera. Stop Focus Far ~Fa Stops the focusi[...]

  • Page 118

    C1572M (9/05) 117 Advanced Commands (Continued) Start Macro [1-9999]Sa Starts the selected macro. A value ranging from 1 to 9999 equals the logical macro number . Stop Macro [1-9999]Ha Stops the selected macro. Start a Sequence [1-9999]qa Performs the same operation as the Start Macro command, that is, starts the selected macro. A value ranging fro[...]

  • Page 119

    118 C1572M (9/05) Advanced Commands (Continued) GPI Auxiliary ON [9-20008]Aa T urns on the designated auxiliary (relay output) at the General Purpose Interface (GPI). A value ranging from 9-20008 equals the GPI auxiliary number . GPI Auxiliary OFF [9-20008]Ba or [9-20008]~Aa T urns off the GPI auxiliary . Query Device Qa Polls a device to give it a[...]

  • Page 120

    C1572M (9/05) 119 Multiplexer Commands Digital Zoom ym Displays a full-screen view of the selected multiplexer input. Issuing the command again results in a 2X magnification and then again in a 4X magnification. Y ou can toggle through all 16 screens one at a time by issuing the Select Multiplexer Input command ([1-16]#m) followed by the Digital [...]

  • Page 121

    120 C1572M (9/05) T able Q. ASCII Command Examples Action Command Switch camera 3 to monitor 1. 1Ma3#a Go to camera 2, preset 3 on monitor 5. 5Ma2#a3a Pan right at speed 47, tilt down at speed 33. 47Ra33Da Stop tilt down only . ~Da Run macro 10 on monitor 1. 1Ma10Sa Stop macro 10 on monitor 1. 1Ma10Ha T rigger alarm 945. 945Ea Stop alarm 945. 945I[...]

  • Page 122

    C1572M (9/05) 121 Appendix B. CM9760-MXB Sideframe and Downframe Configuration Examples This appendix provides examples of the following types of CM9760-MXB configurations: • Sideframe-only configurations: – 736 x 16 (refer to Figure 62) – 976 x 16 (refer to Figure 63) NOTE: For an illustration of a 496 x 16 sideframe-only configuration, [...]

  • Page 123

    122 C1572M (9/05) SIDEFRAME-ONLY CONFIGURATION EXAMPLES Figure 62 and Figure 63 illustrate sideframe-only configurations. Figure 62. Sideframing: 736 x 16 Configuration Figure 63. Sideframing: 976 x 16 Configuration 257 CM9760-MXB CM9760-MXB 721 497 241 1 513 CM9760-MXB VIDEO TIE LINES X16 16 1 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-42[...]

  • Page 124

    C1572M (9/05) 123 DOWNFRAME-ONLY CONFIGURATION EXAMPLES Figure 64 to Figure 67 illustrate downframe-only configurations. Figure 64. Downframing: 256 x 48 Configuration Alarm 241 1 CM9760-MXB 16 1 CM9760-MXB CM9760-MXB 2C 2C 2C 32 17 48 33 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL Black Out R[...]

  • Page 125

    124 C1572M (9/05) Figure 65. Downframing: 256 x 48 Configuration, Looping 241 1 CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT 2C 32 17 48 33 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SYSTEM LOOPED OUTPUTS ARE NOT TERMINA TED Alarm Black Out RS-422 RS-422 Alarm Black Out[...]

  • Page 126

    C1572M (9/05) 125 Figure 66. Downframing: 256 x 64 Configuration 241 1 CM9760-MXB 16 1 CM9760-MXB 32 17 2A 2A 2A 2B 2B 2B CM9760-MXB 48 33 2C 2C 2C CM9760-MXB 64 49 2D 2D 2D SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL Alarm Black Out RS-422 RS-42[...]

  • Page 127

    126 C1572M (9/05) Figure 67. Downframing: 256 x 64 Configuration, Looping 241 1 Alarm CM9760-MXB 16 1 CM9760-MXB 32 17 2A 2A 2A 2B 2B 2B CM9760-MXB 48 33 2C 2C 2C CM9760-MXB 64 49 2D 2D 2D CAM 1 LOOP-OUT CAM 16 LOOP-OUT SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 1[...]

  • Page 128

    C1572M (9/05) 127 SIDEFRAME AND DOWNFRAME COMBINATION CONFIGURATION EXAMPLES Figure 68 to Figure 84 illustrate configurations using a combination of sideframing and downframing. Figure 68. Sideframing and Downframing: 496 x 32 Configuration, Looping 481 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT 32 1[...]

  • Page 129

    128 C1572M (9/05) Figure 69. Sideframing and Downframing: 496 x 48 Configuration 481 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 1 1 2C 2C 12 C 2 C 2C 2C 32 17 48 33 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL Alarm Black Out RS-422 RS-422 Alarm Black Out RS[...]

  • Page 130

    C1572M (9/05) 129 Figure 70. Sideframing and Downframing: 496 x 48 Configuration, Looping 481 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT 1 1 2C 2C 12 C 2 C 2C 2C 32 17 48 33 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SYSTEM L[...]

  • Page 131

    130 C1572M (9/05) Figure 71. Sideframing and Downframing: 496 x 64 Configuration 481 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 1 1 2C 2C 12 C CM9760-MXB CM9760-MXB 1 1 2D 2D 12 D 2 D 2D 2D 2C 2C 2C 32 17 48 33 64 49 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAX[...]

  • Page 132

    C1572M (9/05) 131 Figure 72. Sideframing and Downframing: 496 x 64 Configuration, Looping 481 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 1 1 2C 2C 12 C CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT 1 1 2D 2D 12 D 2 D 2D 2D 2C 2C 2C 32 17 48 33 64 49 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPL[...]

  • Page 133

    132 C1572M (9/05) Figure 73. Sideframing and Downframing: 736 x 32 Configuration 721 513 497 257 241 1 16 1 32 17 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB VIDEO TIE LINES X16 Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm Black Out RS-422 RS-422 Alarm[...]

  • Page 134

    C1572M (9/05) 133 Figure 74. Sideframing and Downframing: 736 x 32 Configuration, Looping 721 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT CM9760-MXB CM9760-MXB 32 17 VIDEO TIE LINES X16 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SYSTEM LOOPED OUTPUTS ARE NOT TERMINA TED Alarm Black Out RS[...]

  • Page 135

    134 C1572M (9/05) Figure 75. Sideframing and Downframing: 736 x 48 Configuration 721 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB 48 33 VIDEO TIE LINES X16 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL Alarm Black [...]

  • Page 136

    C1572M (9/05) 135 Figure 76. Sideframing and Downframing: 736 x 48 Configuration, Looping 721 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT CM9760-MXB 48 33 VIDEO TIE LINES X16 SYSTEM LOOPED OUTPUTS ARE NOT TERMINA TED SUPPLIED DOWN- FRAMING CABLE[...]

  • Page 137

    136 C1572M (9/05) Figure 77. Sideframing and Downframing: 736 x 64 Configuration 721 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB 48 33 CM9760-MXB CM9760-MXB CM9760-MXB 64 49 2 2 2D 2D 22D 1 1 2D 2D 12 D VIDEO TIE LINES X16 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON C[...]

  • Page 138

    C1572M (9/05) 137 Figure 78. Sideframing and Downframing: 736 x 64 Configuration, Looping 721 513 497 257 t 241 1 t t CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB 48 33 CM9760-MXB CM9760-MXB CAM 1 LOOP-OUT CAM 16 LOOP-OUT CM9760-MXB 64 49 VIDEO TIE LINES X16 SYSTEM LOOPED OUTPUTS ARE[...]

  • Page 139

    138 C1572M (9/05) Figure 79. Sideframing and Downframing: 976 x 32 Configuration Alarm Black Out RS-422 RS-422 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB VIDEO TIE LINES X16 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL Alarm Black Out RS-422 RS-422 CAMS 769-9[...]

  • Page 140

    C1572M (9/05) 139 Figure 80. Sideframing and Downframing: 976 x 32 Configuration, Looping 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CAM 1 LOOP-OUT CAM 16 LOOP-OUT CM9760-MXB CM9760-MXB VIDEO TIE LINES X16 SYSTEM LOOPED OUTPUTS ARE NOT TERMINA TED SUPPLIED DOWN- FRAMING CABLES 16X RIB[...]

  • Page 141

    140 C1572M (9/05) Figure 81. Sideframing and Downframing: 976 x 48 Configuration 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 48 33 CM9760-MXB VIDEO TIE LINES X16 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SUPPLIED DOWN- FRAMI[...]

  • Page 142

    C1572M (9/05) 141 Figure 82. Sideframing and Downframing: 976 x 48 Configuration, Looping 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 48 33 CAM 1 LOOP-OUT CAM 16 LOOP-OUT CM9760-MXB VIDEO TIE LINES X16 SYSTEM LOOPED OUTPUTS ARE NOT[...]

  • Page 143

    142 C1572M (9/05) Figure 83. Sideframing and Downframing: 976 x 64 Configuration 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 48 33 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 64 49 CM9760-MXB VIDEO TIE LINES X16 SUPPLIED DOWN- FRAM[...]

  • Page 144

    C1572M (9/05) 143 Figure 84. Sideframing and Downframing: 976 x 64 Configuration, Looping 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB 16 1 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 32 17 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 48 33 CM9760-MXB CM9760-MXB CM9760-MXB CM9760-MXB 64 49 CAM 1 LOOP-OUT CAM 16 LOOP-OUT CM9760-MXB[...]

  • Page 145

    144 C1572M (9/05) CM9760-MXBL DOWNFRAME CONFIGURATION EXAMPLES Figure 85 to Figure 87 illustrate CM9760-MXBL downframe configurations. Figure 85. Downframing to CM9760-MXBL: 496 x 16 Configuration, Looping 481 257 241 1 CM9760-MXB CM9760-MXB CM9760-MXBL CM9760-MXBL CAM 1 LOOP-OUT CAM 16 LOOP-OUT 16 1 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXI[...]

  • Page 146

    C1572M (9/05) 145 Figure 86. Downframing to CM9760-MXBL: 736 x 16 Configuration, Looping 257 CM9760-MXB CM9760-MXB 721 497 241 1 513 CM9760-MXB CM9760-MXBL CM9760-MXBL CAM 1 LOOP-OUT CAM 16 LOOP-OUT VIDEO TIE LINES X16 16 1 CM9760-MXBL SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SYSTEM LOOPED OUTPUTS ARE NOT TERMINA TED Alarm Black Out RS-422[...]

  • Page 147

    146 C1572M (9/05) Figure 87. Downframing to CM9760-MXBL: 976 x 16 Configuration, Looping 961 769 753 513 497 257 241 1 CM9760-MXB CM9760-MXB CM9760-MXB VIDEO TIE LINES X16 CM9760-MXB CM9760-MXBL CM9760-MXBL CM9760-MXBL CM9760-MXBL CAM 1 LOOP-OUT CAM 16 LOOP-OUT 16 1 SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL SYSTEM LOOPED OUTPUTS ARE NOT TER[...]

  • Page 148

    PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series [...]

  • Page 149

    W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East[...]