Philips 40PFS5709 manuel d'utilisation

Register your product and get support at Smart LED TV www.philips.com/welcome 32PFK5709 32PFS5709 40PFK5709 40PFS5709 48PFK5709 48PFS5709 55PFK5709 55PFS5709 User Manual[...]

Contents 1 My new TV 4 1.1 Smart TV 4 1.2 App gallery 4 1.3 Rental videos 4 1.4 Social networks 4 1.5 Skype 4 1.6 Smartphones and tablets 4 1.7 Pause TV and recordings 5 1.8 EasyLink 5 2 Setting up 6 2.1 Read safety 6 2.2 TV stand and wall mounting 6 2.3 Tips on placement 6 2.4 Power cable 6 2.5 Antenna cable 6 2.6 Satellite dish 7 3 Network 8 3.1 [...]

20 Settings 63 20.1 Setup menu 63 20.2 Picture 64 20.3 Sound 67 20.4 Universal access 70 21 Specifications 72 21.1 Environmental 72 21.2 Reception for non-satellite TVs 72 21.3 Reception for satellite TVs 73 21.4 Display 73 21.5 Power 73 21.6 Dimensions and weights (5709 series) 73 21.7 Connectivity 74 21.8 Multimedia 74 22 Software 75 22.1 Softwar[...]

1 My new TV 1.1 Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV wit[...]

1.6 Smartphones and tablets To use your smartphone or tablet as a TV remote control or as your media controller, download the Philips MyRemote app from your smartphone or tablet app store. Operate your TV from your smartphone or tablet, switch channels or change the volume. With the MyRemote app, you can use your phone or tablet to send photos, mus[...]

2 Setting up 2.1 Read safety Read the safety instructions first before you use the TV. In Help, go to Safety and care > Safety . 2.2 TV stand and wall mounting TV stand You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com . Us[...]

2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. 2.6 Satellite dish Attach the satellite F-type connecto[...]

3 Network 3.1 Wireless network What you need To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet.. Network devices The TV can connect to other devices in your wireless network, like your computer or smartphone. You can use a computer with Microsoft Windows or Apple OS X. [...]

Network problems Wireless network not found or distorted • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try th[...]

For more information on Wi-Fi Miracast, press  Keywords and look up Wi-Fi Miracast™ . • Reset Wi-Fi Miracast group Clear the list of connected and blocked devices that are used with Miracast. • Wi-Fi smart screen For more information on Wi-Fi smart screen, press  Keywords and look up Wi-Fi smart screen . • TV network name If you have [...]

4 Connections 4.1 Tips on connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information o[...]

• Only for TVs with component connectors. CVBS - Audio L R CVBS - Composite Video is a high quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. • Only for TVs with component/composite connectors. Scart SCART is a good qu[...]

Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. Example HDMI CEC branding names are property of their respective owners. Operate devices To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press  SOURCES , select a device[...]

Use the Common Interface slot on the TV to insert the CAM card. With the front of the card facing towards you, gently insert the CAM as far as it will go. Leave the card in the slot permanently. It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV. If a CAM is inserted and subscription [...]

4.6 Home Theatre System - HTS Connect HTS Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection. HDMI ARC If your Home Theatre System has an HDMI ARC connection, you can use any HDMI c[...]

format . 3 - Select Multichannel or Stereo . 4 - Press  , repeatedly if necessary, to close the menu. Audio Out levelling Use the Audio Out levelling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing. To level [...]

Y Pb Pr - Audio L R Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. CVBS - Audio L R / Scart Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV. If your game console on[...]

Installation Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Formatting removes all files from the USB Hard Drive. 1 - Connect the USB [...]

You can use the scroll wheel to scroll pages up and down. For more information on how to connect a keyboard, press  Keywords and look up USB keyboard . Mouse speed You can adjust the speed of the mouse moving on screen. To adjust the speed . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings and press OK . 3 - Select Genera[...]

CVBS - Audio L R Use a Video Audio L/R cable to connect the camcorder to the TV. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. 4.15 Computer Connect You can connect your computer to the TV and use the TV as a PC monitor. With HDMI Use an HDMI cable to connect the computer to the TV. With DVI to HDMI Alternativ[...]

21[...]

5 Switch on 5.1 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press  onon the remote control to switch the[...]

6 Remote control 6.1 Key overview Top 1 -  Standby / On To switch the TV On or back to Standby. 2 - Playback and record keys • Play  , to playback. • Pause  , to pause playback • Stop  , to stop playback • Rewind  , to rewind • Fast forward  , to go fast forward • Record  , to record now 3 -  Settings To open the[...]

4 -  Mute To mute the sound or to restore it. 5 -  Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text or start the next or previous chapter on a disc. 6 - TEXT To open or close Text / Teletext. 6.2 IR sensor for non-RF remote control The TV can receive commands from a remote contro[...]

7 TV channels 7.1 Watching TV channels Switch channels To watch TV channels, press  . The TV tunes to the TV channel you last watched. Alternatively, press  to open the Home menu and select Watch TV and press OK . To switch channels, press  + or  - . If you know the channel number, type in the number with the number keys. Press OK after[...]

Rename channels You can rename channels in the channel list. 1 - Select the channel you want to rename in one of the channel lists. 2 - Select the channel to rename. 3 - Press  . You can enter text with the remote control keyboard or open the on-screen keyboard. With the on-screen keyboard • To open the on-screen keyboard, place the cursor in [...]

Universal access With Universal access switched on, you can set some options for hearing impaired and visually impaired people. For more information, press  Keywords and look up Universal access . Video selection Digital TV channels can offer multi video signals (multi-feed broadcast), different camera viewpoints or angles of the same event or d[...]

3 - Press a colour key to select a colour-coded subject at the bottom of the screen. Text sub-pages A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press  or  . T.O.P. Text pages Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, p[...]

If none of the preferred subtitle languages are available, you can select another subtitle language which is available. To set the primary and secondary subtitle language . . . 1 - Press  and select Setup and press OK . 2 - Select Channel settings and select Languages > Primary subtitles language or Secondary subtitles language and press OK .[...]

 key or OK key to open their interactive programme. Navigate iTV pages You can use the arrow and colour keys, the number keys and the  key to navigate the iTV pages. You can use the  (Play),  (Pause) and  (Stop) keys to watch videos within iTV pages. Digital Text (UK only) To open Digital Text, press TEXT . To close, press  . Clos[...]

Channel list copy Introduction Channel list copy is intended for dealers and expert users. In some countries, Channel list copy is only available for copying satellite channels. With Channel list copy , you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming chann[...]

TV channel you want to install on a channel number with multiple TV channels. DVB-T + DVB-C If you can use a DVB-T antenna input but also a DVB-C input, you can set up your TV for both DVB-T and DVB-C. Install one system followed by the other with the necessary settings. Once each system is installed, you need to switch the antenna input signal on [...]

control digit keys. Alternatively, select the frequency, position the arrows on a number with  and  and change the number with  and  . To check the frequency, select Search and press OK . If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic , unless your cable provider ga[...]

8 Satellite channels 8.1 Watching satellite channels To watch satellite channels . . . Press  and select Satellite and press OK . The TV tunes to the satellite channel you last watched. Change channel To change channels, press  + or   . The TV will tune to the next channel in the selected channel list. If you know the channel number, yo[...]

Favourite channels You can mark channels as favourite channels. Your favourite satellite channels are collected in the Favourites list of the satellite channel list. Watching favourite channels Set up a favourite channel list to easily switch between the channels you want to watch. To only switch between your favourite channels with  + and  -[...]

Child lock code You can set or change the Child lock code. To set the lock code or to change the current code . . . 1 - Press  and select Setup and press OK . 2 - Select Satellite settings > Child lock > Change code and press OK . 3 - If a code is set already, enter the current Child lock code and then enter the new code twice. The new cod[...]

Update channel packages With Update channel package , you can bring back satellite channels that were in the satellite channel list before but are now missing. The missing channels were repositioned on the transponder by the satellite operator. The TV must be updated with the latest version of the channel package. To download the latest version of [...]

Remove a satellite You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. However, some satellite operators do not allow removing a satellite. To remove satellites . . . 1 - Press  and select Setup and press OK . 2 - Select Search for satellite and press OK . 3 - Select Remove s[...]

1 - Press  and select Setup and press OK . 2 - Select Satellite settings and press OK . 3 - Select Languages and press OK . Select the setting you want. 4 - Press  , repeatedly if necessary, to close the menu. Hearing impaired audio Some digital TV channels broadcast special audio and subtitles adapted for hearing impaired people. With Hearin[...]

To install a transponder . . . 1 - Press  and select Setup and press OK . 2 - Select Satellite settings > Channel installation > Manual installation and press OK . 3 - If you have more than 1 satellite installed, select the satellite/LNB for which you want to add channels. 4 - Set the Polarization you need. If you set the Symbol rate mode [...]

9 Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu 1 - To open the Home [...]

10 TV guide 10.1 What you need With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV guide information. The TV can collect TV guide information fo[...]

11 Sources 11.1 Sources list In the list of connections - the Source menu - you can find the devices connected to the TV. From this Source menu, you can switch to a device. Sources menu To open the Sources menu, press  SOURCES . To switch to a connected device, select the device with the arrows  (left) or  (right) and press OK . For some d[...]

12 Timers and clock 12.1 Sleeptimer With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > General settings > Sleep timer . With the slider bar you can set the time to up to 180 minutes in increments of[...]

13 Games 13.1 Play a game With a game console connected to the TV, you can play games on TV. For more information on connecting a game console, press  Keywords and look up Game console, connect . Start a game 1 - Press  SOURCES , select the game console and press OK . 2 - On the game console, start the game and select the multi or two-player [...]

14 Your photos, videos and music 14.1 From a USB connection or network computer What you need You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. If you have a computer in your home network, you can view and play your files from your computer on the TV. From a USB device With the TV switched on[...]

Play music To play music, select  Music in the menu bar, select a song and press OK . If there are more songs in the same folder, press  Play all to play all songs in this folder. To jump to the next or previous song, press  + or  - . To pause the music, press OK . Press OK again to continue. To make a 10-second jump in a song or 10-sec[...]

Share a screen on TV To share the screen of your smartphone, tablet or computer on the TV . . . 1 - Switch on the TV. 2 - On the device, open an application such as Wi-Fi Miracast, Wi-Fi Direct™, Intel®Wireless Display* or similar and start scanning for other Miracast devices. 3 - In the list of found devices, select the TV and connect. 4 - On t[...]

15 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. For more information, press  Keywords and look up USB Hard Drive . Pause or resume a broadcast To pause a broadc[...]

16 Recording 16.1 What you need To record a TV programme you need . . . • a connected USB Hard Drive formatted on this TV • digital TV channels installed on this TV (the channels you watch with Watch TV) • to receive channel information for the built-in TV guide (from the broadcaster or from the Internet) For more information, press  Keywo[...]

16.3 Watch a recording To watch a recording . . . 1 - Press  , select  Recordings and press OK . 2 - In the list, select the recording and press  (Play) to start the playback. You can use the  (Forward),  (Rewind),  (Pause) or  (Stop) keys on the remote control. Expired recording Broadcasters can limit the number of days a reco[...]

17 Skype 17.1 About Skype With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV. 17.2 What you need To make a video call on Skype, you need the separately sold Philips PTA317 TV camera with a built-in microphone [...]

password cannot contain a space. If you don't have a Skype Name and Password yet, you can create a new account on the sign in page on TV. 1 - On the sign-in page, select New account and press OK. 2 - Create your new account. • Full name Enter your full name. • Skype name Enter a name as your Skype name. Your Skype Name will be shown in the[...]

View or change your email address, check the amount of credit you have or view the subscription information, or write a message that reflects your mood. • Profile picture If you did not upload a profile picture with your computer yet, you can select one of the available avatars as Profile picture here. • Online status You can change your online[...]

Remove or rename You can Remove or Rename contacts. To remove a contact… 1 - On the Contacts page, select the contact you want to remove. 2 - Press  OPTIONS and select Remove and press OK . The contact is removed from the list. To rename a contact… 1 - On the Contacts page, select the contact you want to rename. 2 - Press  OPTIONS and sel[...]

Outgoing calls and press OK . To view new contact requests, select Contact requests and press OK . To view and listen to your voicemails, select Voicemails and press OK . For how long your Skype events are kept in this history list depends on the amount of contacts you have and how intensively you use Skype. Voicemail About Voicemail If someone cal[...]

password for confirmation. Video You can set Skype to restrict the use of video in Skype calls. With Automatically receive video from , you can set Skype to automatically receive and show video from Anyone , People in my contact list only or from No one . With Show that I have video to , you can set Skype to send out your video to People in my cont[...]

4 - Press  Done to store the camera viewpoint and to go back to your Skype call. 17.10 Sign out When you sign out of Skype, you are signing out your Skype account. Your Online status will change to Offline . Your contacts will not be able to call you. To sign out… 1 - Press  Back from anywhere within Skype to return to the Skype menu . 2 - [...]

18 Smart TV 18.1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the[...]

The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen. - Some plug-ins (e.g. to view pages or videos) are not available on your TV. - Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range o[...]

Streaming video With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. You can pause or restart a [...]

19 Multi room 19.1 About Multi room With Multi Room you can watch a TV programme that comes from another TV in your home. The programme is streamed from one TV to the other. You can stream a programme to a TV that has no antenna connection or has no Smart card subscription of its own. You can also stream a recorded programme from a TV with a connec[...]

20 Settings 20.1 Setup menu Quick picture and sound settings With Quick picture and sound settings you can set your basic picture preferences in a few easy steps. The settings you made are stored under the Picture style - Personal . You can return to your picture preference if some settings were changed. You can set a preferred picture setting for [...]

Update software Press  Keywords and look up Software, Internet update or Software, USB update . Update software Press  Keywords and look up Software, USB update . Software settings Press  Keywords and look up Software, current version . Watch demo With Demo in  menu, you can watch some demonstration videos of some of the picture quality[...]

Advanced picture settings Colour settings Colour enhancement With Colour enhancement , you can enhance the colour intensity and the details in bright colours. To adjust the level . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > Picture > Advanced > Colour > Colour enhancement . 3 - Press  (right) and selec[...]

4 - Press  , repeatedly if necessary, to close the menu. Gamma With Gamma , you can set a non-linear setting for picture luminance and contrast. Gamma is a setting intended for expert users. To adjust the level . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > Picture > Advanced > Contrast > Gamma . 3 - Pre[...]

Location If the TV is located in a shop, you can set the TV to display an in store promotion banner. The Picture style is set to Vivid automatically. The automatic Switch off timer is switched off. To set the TV to Shop location . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > General settings > Location and press [...]

1 - Press  and select Setup and press OK . 2 - Select TV settings > Sound > Advanced > Auto volume leveling . 3 - Press  (right) and select On or Off . 4 - Press  , repeatedly if necessary, to close the menu. TV speakers You can send the TV sound to a connected audio device - a Home Theatre System or audio system. With TV speakers[...]

To select a wireless speaker to play the TV sound… 1 - Press  and select Setup and press OK . 2 - Select TV settings > Sound > Sound output . 3 - Press  (right) and select Wireless sound . 4 - Select the name of the wireless speaker and press OK . The TV speakers will switch off. If you select a wireless subwoofer the TV speakers stay[...]

4 - Press  , repeatedly if necessary, to close the menu. 20.4 Universal access Switch on With Universal access switched on, the TV is set for use for hearing and visually impaired people. Switch on If you did not switch on Universal access during the installation, you can still switch it on in Setup . To switch on Universal access . . . 1 - Pres[...]

If Universal access does not appear in the Options menu, switch on Universal access in Setup . For more information, press  Keywords and look up Universal access . 71[...]

21 Specifications 21.1 Environmental Saving energy The Eco settings bundle the settings that help the environment. While you are watching TV channels, press  icon, then select Eco settings , press OK . Active settings are marked with a  . You can mark or unmark each setting with the OK key. Press  again to close Eco settings . Energy savin[...]

COFDM 2K/8K; DVB-C (cable) QAM - For model name with PxT: DVB-T2; DVB-C (cable) QAM • Analogue video playback : NTSC; SECAM; PAL • Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2); MPEG4 SD/HD (ISO/IEC 14496-10) • Digital audio playback (ISO/IEC 13818-3) Note: See selected countries on the TV type plate 21.3 Reception for satellite TVs [...]

Width 725.7 mm - Height 429.2 mm - Depth 55.4 mm - Weight ±5.17 kg • with TV stand: Width 725.7 mm - Height 484.6 mm - Depth 179.4 mm - Weight ±6.47 kg 40Pxx5709 • without TV stand: Width 918.2 mm - Height 532.1 mm - Depth 56.3 mm - Weight ±7.88 kg • with TV stand: Width 918.2 mm - Height 592.9 mm - Depth 212.1 mm - Weight ±9.22 kg 48Pxx5[...]

22 Software 22.1 Software update Update from USB It might be necessary to update the TV software. You need a computer with an high-speed Internet connection and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space. Make sure that write protection is switched off. 1 - Start the update on TV Press  , [...]

This is a document describing the distribution of the source code used on the Philips TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain source code for this software can be found in the user manual. PHILIPS MAKES NO WARR[...]

windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications. This piece of software is made available under the terms and conditions of the DirectFB license, which can be found below. Source: http://sourceforge.net/projects/jointspace/files/remote_a pplications_SDK/remote_spplications_SDK_v1.3.1/Di[...]

Source: http://sourceforge.net/projects/linux-ntfs fuse (2.8.4) Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel. This piece of software is made available under the terms and conditions of the fuse license, which can be found below. Source: http://fuse.sourceforge.net/ libiconv (1.11.1) This libra[...]

The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. Source: http://www.gnu.org/software/grep/ gzip (1.3.12) GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project. Mark Adler wrote the decompression part.[...]

ezxml (0.8.6) ezXML is a C library for parsing XML documents. Used inside Philips libraries. Source: http://sourceforge.net/projects/ezxml/ SQLite (3.7.7.1) SQLite is a in-process library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine. Source: http://www.sqlite.org/download.html AES (aes-src-29-0[...]

23 Troubleshooting and support 23.1 Troubleshooting Channels No digital channels found during the installation See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. Make sure that all cables are properly connected and that the correct network is selected. Previously installed channels are not in the cha[...]

Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. Computer picture is not stable Make sure that your PC uses the supported resolution and refresh rate. Connections HDMI • Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to displa[...]

23.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these n[...]

24 Safety and care 24.1 Safety Important Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply. Secure the TV from falling over Always use the supplied wall bracket to secure the TV from falling over. Mount the bracket and secure the TV onto the bracket,[...]

Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures bel[...]

25 Terms of use, copyrights and licenses 25.1 Terms of use 2014 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product. TP Vision is the warrantor in relation to the TV with which this bookl[...]

All Rights Reserved. Skype Skype™ © 2013 Skype and/or Microsoft. The Skype name, associated trade marks and logos and the "S" logo are trade marks of Skype or related entities. Skype is a trademark of Skype or its related companies. Although this product has been tested and met our certification standards for audio and video quality, i[...]

pending applications in other countries throughout the world. Other trademarks All other registered and unregistered trademarks are the property of their respective owners. 88[...]

Index A Active control 64 Activity style 66 Amplifier, audio system 68 Antenna connection 7 Antenna connection, tips 11 App, gallery 60 App, rental videos 60 Apps, feedback 60 Apps, lock 62 Apps, open 64 Apps, recommended 66 Apps, search 68 Audio commentary 70 Audio description 72 Audio language 29 Audio Out - Optical 12 Audio to video sync 15 Auto[...]

Keyboard, connect 18 L Language, audio 31 Language, menus and messages 29 Language, original 33 Location 67 M Manual installation 33 Media servers, supported 76 Menu language 31 Miracast, block/unblock 48 Miracast, share a screen 48 Miracast, stop sharing 48 Miracast™ 47 Motion, Clear LCD 68 Motion, HD Natural Motion 68 Mouse, connect 18 MPEG art[...]

Smart TV, start page 61 Sound style 67 Standby 24 Subtitles 28 Subtitles, pause TV 51 Subtitles, recording 50 Support, online 84 Surround mode 69 Switch off timer 44 Switching on 26 Symbol rate 32 Symbol rate mode 34 Synchronise audio and video 17 T Teletext 29 Text 31 Treble 67 TV clock 46 TV guide 42 TV guide, clock 48 TV network name 13 TV on De[...]

Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 Deutchland 0180 501 [...]