Pioneer AVIC-X930BT manuel d'utilisation

Operation Manual MUL TIMEDIA A V NA VIGA TION RECEIVER A VIC-Z130BT A VIC-X930BT A VIC-X9310BT Notice to all users: This software requires that the navigation system is properly connected to your vehicle ’ s parking brake and depending on your v ehicle, additional installation may be required. F or more information, please contact your Authorized[...]

Thank you for buying this P ioneer product. Please read through these operating instruct ions so you will know how to operate your model properly. A fter you have finished read ing the instructions, k eep this man- ual in a safe place for future refer ence. Important The screens shown in the examples may differ from actual screens. Actual screens m[...]

Sudden start alert 33 Searching for and selecting a location The basic flow of creating your route 34 Searching for a location by address 35 – Searching for a city name first 35 – Finding the location by specifying the house number 36 Setting up a route to your home 37 Searching for P oints of Interest (POI) 37 – Searching for POIs by preset [...]

– P airing from your Bluetooth devices 57 – Searching for a specified Bluetooth device 58 – Deleting a registered device 59 Connecting a registered Bluetooth device manually 59 – Setting for priority connecting 60 Using hands-free phoning Displaying the phone menu 61 Making a phone call 61 – Direct dialing 61 – Making a call home easily[...]

Using advanced functions 84 – Storing the strongest broadcast frequencies 85 – Switching the seek mode 85 – T uning in strong signals 85 – Switching the reception mode 85 Playing audio CDs Starting procedure 87 Reading the screen 87 Using the touch panel keys 88 Operating by hardware buttons 89 Using advanced functions 89 Playing music file[...]

– Starting procedure 122 – Reading the screen 122 – Using the touch panel keys 122 Using advanced functions 122 Using Pandora® Starting procedure 124 Reading the screen 124 Using the touch panel keys 126 Operating by hardware buttons 126 Using Aha Radio Starting procedure 127 Reading the screen 128 Using the touch panel keys 129 F unctions c[...]

Correcting the current location 155 Changing the eco-function setting 155 Displaying the screen for map settings 156 Setting the auto-zoom display 156 Setting the detailed city map 156 Setting the barrier graphic for city map 157 Displaying the traffic notification icon 157 Displaying the Bluetooth connection icon 158 Setting the current street nam[...]

– V oice operation for the iPod 185 – V oice operation for AV source (other than iP od) 186 – V oice commands related to hands-free phoning 187 Tips for the voice operation 188 Other functions Setting the anti-theft function 189 – Setting the password 189 – Entering the password 189 – Deleting the password 189 – Forgotten password 189[...]

Manual overview Before using this product, be sure to read Im- portant Information for the User (a separate manual) which contains warnings, cautions, and other important information that you should note. The screen examples shown in this manual are the ones for AVIC -Z130BT . If you use a dif- ferent model, the screens that appear may dif- fer fro[...]

“ External storage device (USB, SD) ” The SD memor y card, SDHC memor y card, microSD card, microSDHC card and USB memor y device are collectively referred to as the “ external storage device (USB, SD) ” . If it in- dicates the USB memor y only , it is referred to as the “ USB storage device ” . “ SD memory card ” The SD memor y car[...]

Map coverage F or details about the map coverage of this na- vigation system, refer to the information on our website. Protecting the LCD panel and screen p Do not allow direct sunlight to fall on the LCD screen when this product is not being used. Extended exposure to direct sunlight can result in LCD screen malfunction due to the resulting high t[...]

Checking part names and functions This chapter gives information about the names of the parts and the main features using the buttons . 7 6 5 4 3 2 1 A VIC -Z130BT (with the LCD panel closed) 8 9 A VIC -Z130BT (with the LCD panel open) En 12 Chapter 02 Basic operation[...]

6 8 7 9 3 a 4 5 c b A VIC -X930BT , AVIC-X9310BT 1 button ! Press the button to activate voice op- erations. = F or details, refer to Chapter 33. ! Press and hold the button to switch the AV source to mute. T o cancel the muting, press and hold it again. 2 VOL (+/ – ) button Press to adjust the A V (Audio and Video) source volume. 3 HOME button ![...]

a Multi-control (V olume knob/ /MUTE) ! Rotate to adjust the A V (Audio and Video) source volume. ! Press the center of Multi-control to hear the route guidance. ! Press and hold the center of Multi-con- trol to mute the AV (Audio and Video) source. T o cancel the muting, press and hold it again. b Front panel c Detach button Press to remove the fr[...]

Adjusting the LCD panel angle p This function is available for AVIC -Z130BT only . WARNING When opening, closing and adjusting the angle of the LCD panel, be careful not to get your fin- gers caught. CAUTION Do not open or close the LCD panel by force. This may cause malfunction. 1 Press the h button. The “ Monitor Setup ” screen appears. 2 T o[...]

Ejecting a disc (for A VIC-Z130BT) 1 Press the h button. The “ Monitor Setup ” screen appears. 2 T ouch [Disc Eject]. The LCD panel opens, and the disc is ejected. 3 Remove the disc, and press the h but- ton. The LCD panel closes. Inserting a disc (for A VIC- X930BT and A VIC-X9310BT) % Insert a disc into the disc-loading slot. p Do not insert [...]

1 Press the h button. The “ Monitor Setup ” screen appears. 2 T ouch [SD Insert]. The LCD panel opens, and the SD card slot ap- pears. 3 Insert an SD memory card into the SD card slot. Insert it with the label surface facing to the up- side and press the card until it clicks and com- pletely locks. 4 Press the h button. The LCD panel closes. p [...]

If data related to map data, such as custo- mized POI data, is stored on the SD memor y card, operating procedures are slightly differ- ent. 1 Press the h button and then touch [Eject SD]. 2 T ouch [Y es]. The navigation system restarts, and then the LCD panel opens. 3 Eject the SD memory card. 4 Press the h button. The LCD panel closes. Inserting [...]

If data related to map data, such as custo- mized POI data, is stored on the SD memor y card, operating procedures are slightly differ- ent. 1 Press the h button and then touch [Eject SD]. 2 T ouch [Y es]. The navigation system restarts, and a message prompting you to remove the SD memor y card appears. 3 Eject the SD memory card while the message [...]

Connecting your iPod Using the USB inter face cable for iPod en- ables you to connect your iP od to the naviga- tion system. p A USB inter face cable for iP od (CD -IU51V) (sold separately) is required for connection. p F or details about iPod compatibility with this navigation system, refer to the informa- tion on our website. p Connection via a U[...]

4 Read the disclaimer carefully , checking its details, and then touch [OK] if you agree to the conditions. The map screen appears. Regular startup % Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. p The screen shown will differ depending on the previous conditions. p When there is no route[...]

Screen switching overview 2 5 6 1 1 3 4 En 22 Chapter 03 How to use the navigation menu screens[...]

What you can do on each menu 1 T op Menu P ress the HOME button to display the “ To p Menu ” screen. This is the starting menu to access the desired screens and operate the various functions. There are two types of the “ T op Menu ” screen. Classic Menu Shortcut Menu p In this manual, Classic Menu will be re- ferred to as “ T op Menu ” [...]

5 Move the icon to the left side of the screen, and then release it. The selected item is added to shortcut. Removing a shortcut 1 T ouch and hold the icon of the shortcut you want to remove. 2 Move the icon to the right side of the screen, and then release it. Operating list screens (e.g . POI list) 1 5 4 2 3 6 1 Screen title 2 T ouching or on the[...]

Most of the information provided by your navigation system can be seen on the map. Y ou need to be- come familiar with how information appears on the map. How to read the map scr een This example shows an example of a 2D map screen . 1 8 9 a b 2 3 4 c e d 5 7 6 f g p Information with an asterisk (*) appears only when the route is set. p Depending o[...]

8 Street name (or city name) that your vehi- cle is traveling along = F or details, refer to Setting the current street name display on page 158. 9 Extension tab for the AV information bar T ouching this tab opens the A V information bar and enables you to briefly view the current status on the A V source. T ouching it again re- tracts the bar . a [...]

Display during freeway driving In certain locations of the freeway , lane infor- mation is available. The map indicates the re- commended lane to be in to easily maneuver the next guidance. 1 While driving on the freeway , freeway exit numbers and freeway signs may be displayed in the vicinity of interchanges and exits. 2 3 1 Lane information 2 F r[...]

3 T ouch or to change the map scale. p If you do not operate the function for a few seconds, the touch panel keys for map dis- play control disappear . # If you touch the direct scale key , the map is changed to the selected scale directly . Switching the map orientation Y ou can switch how the map shows your vehi- cle ’ s direction between “ H[...]

2 T ouch . The “ Information List ” screen appears. 3 T ouch the item that you want to check the detailed information. Information for a specified location appears. The information shown varies according to the location. (There may be no information for that location.) = For details, refer to Setting the display of icons of favorite locations o[...]

Displays the “ V olume Settings ” screen. = For details, refer to Setting the Volume for Guidance and Phone on page 165. : Contacts Displays the “ Contacts List ” screen. = For details, refer to Calling a number in the phone book on page 62. Close Hides the “ Quick Access ” menu. Switching the view mode V arious types of screen displays[...]

= For details, refer to Checking the eco- friendly driving status on the next page. En 31 Chapter 04 How to use the map How to use the map[...]

This navigation system is equipped with eco- friendly driving functions that can be used to estimate whether you are driving in an envir- onmentally friendly way . This chapter describes these functions. ! The fuel mileage calculated is based on a theoretical value determined from vehicle speed and position information from the navigation system. T[...]

A comparison of the past average fuel mileage and the average fuel mileage for 90 seconds in the past, while the ve- hicle is driving on a freeway. 4 Animal icons The number of displayed animal icons in- creases or decreases according to the value of “ Eco Score ” . p This is not displayed when “ Eco Score ” is set to “ Off ” or when no[...]

CAUTION For safety reasons, these route-setting functions are not available while your vehicle is in motion. T o enable these functions, you must stop in a safe place and put on the parking brake before setting your route. p Some information regarding traffic regula- tions depends on the time when the route calculation is per formed. Thus, the info[...]

Searching for a location by address The most frequently used function is “ Ad- dress ” , in which the address is specified and the destination is searched. Y ou can select the method of searching for a location by address. ! Searching for a city name first ! Finding the location by specifying the house number Searching for a city name first p D[...]

8 Enter the street name and then touch [OK]. The “ Street Selection ” screen appears. 9 T ouch the street you want. 10 Enter the house number and then touch [OK]. The “ House Number Selection ” screen ap- pears. 11 T ouch the desired house number range. The searched location appears on the map screen. = For the subsequent operations, refer [...]

If the house number you have entered is not found, a message appears. In that case, all house number ranges are listed after touching [ Ye s ]. # If you touch , the geographic center of the city appears on the map screen. 8 T ouch the desired house number range. The searched location appears on the map screen. = For the subsequent operations, refer[...]

4 Enter the POI name and then touch [OK]. The “ POI List ” screen appears. # If you change the region to search, touch the state code key and display the “ State List ” screen to change the setting. State code key If the destination is in another countr y, touch [ Country ] to change the country setting when the “ State List ” screen is[...]

p If the search candidates number reaches 20 or less, the screen automatically changes to the search result screen. 1 Display the “ Destination Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22. 2 T ouch [POI]. The “ POI Search ” screen appears. 3 T ouch [Around City]. 4 Enter the city name and t[...]

Searching for POIs by using the data on the SD memory card Creating a customized POI is possible by using the utility program AVIC FEEDS which is available separately , on your PC. (AVIC FEEDS will be available on our website.) Storing the customized POI properly and inserting the SD memor y card enables the system to use the data for searches. 1 S[...]

3 T ouch [East] or [West], and then enter the longitude. T o enter W 50°1 ’ 2.5 ” for example, touch [ West ], [0], [5], [0], [0], [1], [0], [2], and [5]. 4 T ouch [North] or [South], and then enter the latitude. T o enter N 5°1 ’ 2.5 ” for example, touch [ North ], [0], [5], [0], [1], [0], [2], and [5]. 5 T ouch [OK]. The searched locati[...]

Setting a route to your destination 1 Search for a location. = For details, refer to Chapter 6. After searching for the destination, the Loca- tion confirmation screen appears. 2 T ouch [OK]. Location confirmation screen The destination is set, and then route calcula- tion starts. When the route calculation is completed, Route confirmation screen a[...]

Displaying the route overview 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Destination]. The “ Destination Menu ” screen appears. 3 T ouch [Route Overview]. 2 3 1 1 Options = For details, refer to Modifying the r oute calculation conditions on this page. 2 Profile = For details, refer to Checking the current itiner[...]

Calculates a route that may include toll roads (including toll areas). On : Calculates a route that avoids toll roads (in- cluding toll areas). p The system may calculate a route that in- cludes toll roads even if “ On ” is selected. Avoid Ferry This setting controls whether ferr y crossings should be taken into account. Off *: Calculates a rou[...]

Editing waypoints Y ou can edit waypoints (locations you want to visit on the way to your destination) and recal- culate the route so that it passes through these locations. Adding a waypoint Up to 5 waypoints can be set, and waypoints and final destination can be sorted automati- cally or manually . 1 Display the “ Route Overview ” screen. = F[...]

Sorting waypoints Y ou can sort waypoints and recalculate the route. p Y ou cannot sort waypoints that you have al- ready passed. 1 Display the “ Route Overview ” screen. = For details, refer to Displaying the route over view on page 43. 2 T ouch [Waypoints]. The “ W aypoints List ” screen appears. 3 T ouch [Sort]. The “ Sort W aypoints ?[...]

Storing favorite locations Storing your favorite locations as “ Favorites ” provides you with the opportunity to save the time and effort of re-entering this information. Stored items can be made available on “ Fa- vorites ” later . Registering a location by “ Favorites ” “ Favorites ” can store up to 400 locations. Home location is[...]

1 Name Y ou can enter the desired name. p Up to 17 characters can be input for the name. 2 Phone# Y ou can edit the registered phone number . T o dial the number , touch [ Call ]. The maximum digits you can enter for the phone number is 15. 3 Icon Y ou can change the symbol displayed on the map and “ Favorites ” . 4 Modify Location Y ou can cha[...]

Deleting a favorite location from the list 1 Display the “ Destination Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22. 2 T ouch [Favorites]. The “ Favorites ” screen appears. 3 T ouch [Delete]. 4 Select the location you want to delete. A check mark appears next to the selected lo- cation. # If[...]

2 Insert an SD memory card into the SD card slot. = For details of the operation, refer to Insert- ing and ejecting an SD memory card on page 16. 3 Display the “ Destination Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22. 4 T ouch [Favorites]. The “ Favorites ” screen appears. 5 T ouch . The m[...]

p Please note that use of the traffic informa- tion function on AVIC -X930BT or AVIC - X9310BT will require that a separately sold T raffic tuner (ND-TMC10) be connected. Y ou can check real-time traffic information transmitted by the T raffic Management Chan- nel (TMC) of the receive data ser vices (RDS) on the screen. Such traffic information is [...]

When you touch [ T raffic on Route ], the list displayed will be sorted according to the distance from the vehicle position to the traffic information. ! : Y ou can sort the traffic information in alpha- betical order . ! : Y ou can sort the traffic information accord- ing to the incident. The list will be sorted in the order of closed/ blocked roa[...]

4 Select an incident you want to view in detail. The details of the selected incident are dis- played. p T ouching an incident you want to see allows you to view the detailed information of the incident. If the information cannot be dis- played on one screen, touch or to view the remaining information. p T ouching allows you to check the loca- tion[...]

Checking for traffic congestion automatically If there is information about traffic congestion on your current route and if an alternative route can be found, the navigation system will recommend a new alternative route automati- cally . In such a case, the following screen will appear . 12 1 Difference in distance and travel time between the exist[...]

p Notification icon shows the nearest traffic information on the route. However , if you touch [ Diversion ], the route is recalculated by taking into account not only this infor- mation, but also all traffic congestion infor- mation on the route. = For details, refer to Checking for traffic con- gestion automatically on the previous page. # If you[...]

If your devices feature Bluetooth ® technology , this navigation system can be connected to your devices wirelessly . This section describes how to set up a Bluetooth connection. For details about the connectivity with the de- vices featuring Bluetooth wireless technology , refer to the information on our website. Preparing communication devices T[...]

5 Wait until your Bluetooth device ap- pears in the list. p If you cannot find the Bluetooth device that you want to connect, check that the device is waiting for the Bluetooth wireless tech- nology connection. 6 T ouch the Bluetooth device name you want to register . # If you touch [ Search Again ], the system starts searching for Bluetooth device[...]

6 Register the navigation system on your Bluetooth device. If your device asks you to enter a password, enter the password of the navigation system. When the device is successfully registered, the connection settings are made from the de- vice. p If registration fails, repeat the procedure from the beginning. Searching for a specified Bluetooth dev[...]

8 T ouch the Bluetooth device name you want to register . # If you touch [ Search Again ], the system starts searching for Bluetooth devices waiting for con- nection, and displays them in the list format when any devices are detected. 9 Enter the password (the default pass- word is “ 1111 ” ) using the Bluetooth de- vice. Enter the password whi[...]

! Connection cannot be established automa- tically for some reason. If you start connection manually, carry out the following procedure. Y ou can also connect the Bluetooth device by having the navigation sys- tem detect it automatically. 1 Activate the Bluetooth wireless tech- nology on your devices. F or some Bluetooth devices, no specific-action[...]

CAUTION For your safety , avoid talking on the phone as much as possible while driving. If your cellular phone features Bluetooth tech- nology , this navigation system can be con- nected to your cellular phone wirelessly . Using this hands-free function, you can operate the navigation system to make or receive phone calls. Y ou can also transfer th[...]

Making a call home easily Y ou can call home without taking the time to enter the phone number if the phone number has been registered. 1 Display the “ Phone Menu ” screen. = For details, refer to Displaying the phone menu on the previous page. 2 T ouch [Call Home]. Dialing home starts. p If you have not registered your home num- ber , a messag[...]

4 Enter the desired name and then touch [OK]. The “ Contacts Name Search Results ” screen appears. 5 T ouch the desired name on the list. The “ Contacts T ype Selection ” screen ap- pears. 6 T ouch the desired entry on the list to make a call. 7 T ouch to end the call. Dialing from the history The most recent calls made (dialed), received a[...]

2 T ouch [POI]. The “ POI Search ” screen appears. 3 Search for the POI. The “ POI List ” screen appears. = For details of the operation, refer to Search- ing for P oints of Interest (POI) on page 37. 4 T ouch next to the POI that you want to call. The “ POI Information ” screen appears. 5 T ouch [Call] to make a call. p T o cancel the [...]

2 T ouch to end the call. The call ends. p Y ou may hear a noise when you hang up the phone. # If you touch [ Vo l – ]o r[ Vo l + ], you can adjust the volume when talking. # If you touch [ Close Menu ], the operation menu during call is minimized. T o display the menu again, touch . T ransferring the phone book Y ou can transfer the phone book e[...]

4 T ouch [No]. The transferred data is imported to the naviga- tion system. When the data is successfully imported, an import complete message is displayed and the “ Contacts List ” screen appears. p It may take time depending on how many entries will be transferred. Deleting register ed contacts 1 Display the “ Phone Menu ” screen. = For d[...]

4 T ouch to delete the current pass- word, and enter the new password by using the keyboard. 5 T ouch [OK]. The password is changed. Stopping Bluetooth wave transmission Y ou can stop transmission of electric waves by turning off the Bluetooth function. If you do not use the Bluetooth wireless technology, we recommend selecting “ Off ” . 1 Disp[...]

3 T ouch [Refuse All Calls]. Each touch of [ Refuse All Calls ] changes the settings as follows: ! Off (default): Accepts all incoming calls. ! On : Rejects all incoming calls. p If both “ Refuse All Calls ” and “ Auto An- swer Preferen ce ” are activated, “ Refuse All Calls ” takes priority and all incoming calls are automatically reje[...]

7 T ouch [Y es]. Update starts. 8 Wait until the upgrade pro cess is com- plete. A message will appear after the update is complete. 9 T ouch [OK]. The message disappears, and the map screen returns. 10 Eject the SD memory card. Notes for hands-free phoning General notes ! Connection to all cellular phones featuring Bluetooth wireless technology is[...]

This chapter describes the basic operations of the AV source. Y ou can play or use the following sources with your Pioneer navigation system. ! T uner (HD Radio tuner) (*1) ! FM (*2) ! AM (*2) ! CD ! ROM (in MP3, AAC, WMA) ! DVD-V ideo ! DivX ! USB ! SD The following sources can be played back or used by connecting an auxiliar y device. ! HD Radio [...]

1 T ouch the appropriate key to display the list that you want. 2 T ouch the key on the right edge of the screen. The AV operation screen returns. Selecting an item 1 Scroll the list by dragging items up or down to display the item you want to se- lect. p Flicking a list item enables you to quickly scroll through the list. T o stop scrolling, gentl[...]

p This function is available for AVIC -X930BT and AVIC -X9310BT . Y ou can listen to the radio by using the naviga- tion system. This section describes operations for radio (FM). Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 2 T ap [FM] on the left [...]

Using the touch panel keys 6 5 1 3 4 2 1 Perform s manual tuning T o tune manually , touch [ o ]o r[ p ] briefly . The frequencies move up or down one step at a time. Perform s seek tuning T o perform seek tuning, touch and hold [ o ] or [ p ] for about one second and then re- lease. The tuner will scan frequencies until a broadcast strong enough f[...]

1 Select a frequency that you want to store in memory . 2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the pr eset list display on the previous page. 3 Keep touching a preset tuning key [P1] to [P6]. Preset list display Preset tuning keys = For details of the list operations, refer to Op- era[...]

1 T ouch on the “ FM ” screen. The “ Function ” menu appears. 2 T ouch [Local]. 3 T ouch [On] to tur n local seek tuning on. # If you touch [ Off ], local seek tuning is turned off . 4 T ouch [ c Prev] or [Next d ] to set the sen- sitivity . There are four levels of sensitivity for FM. Level: 1 — 2 — 3 — 4 p The level “ 4 ” settin[...]

p This function is available for AVIC -X930BT and AVIC -X9310BT . Y ou can listen to the radio using this naviga- tion system. This section describes operations for radio (AM). Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 2 T ap [AM] on the left ed[...]

Using the touch panel keys 5 1 3 4 2 1 Perform s manual tuning T o tune manually , touch [ o ]o r[ p ] briefly. The frequencies move up or down one step at a time. Perform s seek tuning T o perform seek tuning, touch and hold [ o ] or [ p ] for about one second and then re- lease. The tuner will scan frequencies until a broadcast strong enough for [...]

2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the pr eset list display on the previous page. 3 Keep touching a preset tuning key [P1] to [P6]. Preset list display Preset tuning keys = For details of the list operations, refer to Op- erating list screens (e.g. iP od list screen) on page 70. T[...]

1 T ouch on the “ AM ” screen. The “ Function ” menu appears. 2 T ouch [Local]. 3 T ouch [On] to tur n local seek tuning on. # If you touch [ Off ], local seek tuning is turned off . 4 T ouch [ c Prev] or [Next d ] to set the sen- sitivity . There are two levels of sensitivity for AM. Level: 1 — 2 p The level “ 2 ” setting allows rece[...]

Y ou can listen to the radio by using the naviga- tion system. This section describes operations for HD Radio reception. For A VIC -X930BT and AVIC-X9310BT users This HD Radio Ready ™ receiver (this navigation system) is ready to receive HD R adio broad- casts when connected to the GEX-P20HD, GEX-P10HD, sold separately . p For details concerning [...]

Reading the screen d c 12 6 5 4 78 3 9 a b 1 Band indicator Shows which band the radio is tuned to: FM1, FM2, FM3 or AM. 2 Detailed information = F or details, refer to Switching the display on page 83. 3 Signal level indicator 4 F requency indicator 5 Signal type indicator Shows the type of signal currently being re- ceived. If a digital broadcast[...]

Using the touch panel keys 7 8 1 5 6 2 4 3 1 Perform s manual tuning T o tune manually , touch [ o ]o r[ p ] briefly. The frequencies move up or down one step at a time. Perform s seek tuning T o perform seek tuning, touch and hold [ o ] or [ p ] for about one second and then re- lease. The tuner will scan frequencies until a broadcast strong enoug[...]

T ouch this key when receiving the song infor- mation of the song on air , and you can store the song information on your iP od . = F or details, refer to Storing song informa- tion to an iP od (iT unes T agging) on the next page. 4 Switches the display = F or details, refer to Switching the display on this page. 5 Recalls equalizer curves = F or d[...]

p Only when the tuner has been tuned in to an HD Radio station, can the display be changed. p When the tuner has been tuned in to an HD Radio station, default display is changed into station name instead of frequency. Scrolling the detailed information Y ou can turn the detailed information scroll mode on and off . % T ouch and hold [Disp]. Storing[...]

1 2 3 4 1 Stores the strongest br oadcast frequen- cies 2 Switches the seek mode 3 T unes in strong signals 4 Switches the reception mode = For details of each function, refer to sec- tions below with the relative titles. Storing the strongest broadcast frequencies BSM (best stations memor y) lets you automa- tically store the six strongest broadca[...]

2 T ouch [Blending] to switch the recep- tion mode. ! Analog : Receives analog broadcasting only . ! D/A Auto : Automatically switches to the analog broad- cast of the same frequency level as the digi- tal broadcast. p If you select “ Analog ” on this setting while [ Seek ] is set to “ HD ” , the setting on [ Seek ] turns to “ All ” aut[...]

Y ou can play a normal music CD using the built-in drive of the navigation system. This section describes how . Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 2 Insert the disc you want to play into disc-loading slot. Playback starts from the first t[...]

Using the touch panel keys 9 8 7 12 3 5 6 4 1 Scans tracks of a CD Scan play is per formed by touching only one key . = F or details of the operation, refer to Scans tracks of a CD on the next page. 2 Plays tracks in random order All of the tracks in the disc can be played at random by touching only one key . = F or details of the operation, refer [...]

Operating by hardware buttons Pressing the TRK button Y ou can skip tracks for ward or backward. Pressing and holding the TRK button Y ou can per form fast reverse or fast for- ward. Using advanced functions % T ouch on the “ CD ” screen. The “ Function ” menu appears. 1 2 3 4 1 Changes the repeat range Each touch of [ Repeat ] changes the [...]

Y ou can play a disc that contains compressed audio files using the built-in drive of the navi- gation system. This section describes these operations. p In the following description, the MP3, WMA, AAC files are collectively referred to as “ Compressed audio file ” . Starting procedure 1 Display the A V operation screen. = For details of the op[...]

p “ ------- ” is displayed if there is no corre- sponding information. 4 Current time 5 File information ! File number indicator ! File name indicator ! File type indicator Shows the type of audio files. En 91 Chapter 18 Playing music files on ROM Playing music files on ROM[...]

Using the touch panel keys 9 8 7 12 3 5 6 4 1 Scans folders and files Scan play is per formed by touching only one key . = F or details of the operation, refer to Scans folders and files on the next page. 2 Plays files in random order The files in the current repeat play range can be played at random by touching only one key. p If the disc contains[...]

= F or details, refer to Operating list scr eens (e.g. iP od list screen) on page 70. T ouching displays the content of the upper folder (parent folder). If the uppermost folder is listed, cannot be used. 9 Switches the media file type played When playing a disc containing a mixture of various media file types, you can switch be- tween media file t[...]

Each touch of [ Sound Retriever ] changes the setting as follows: ! MODE 1 : Activates “ Sound Retriever ” function. ! MODE 2 : Activates “ Sound Retriever ” function. ! Off : Deactivates “ Sound Retriever ” function. p “ MODE 2 ” has a stronger effect than “ MODE 1 ” and is more effective when playing back highly compressed aud[...]

Y ou can play a DVD - Video using the built-in drive of the navigation system. This section de- scribes operations for playing a DVD-V ideo. Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 2 Insert the disc you want to play into disc-loading slot. The[...]

Using the touch panel keys Playback screen (page 1) 7 a 9 8 b 6 5 4 3 2 1 Playback screen (page 2) Playback screen (page 3) g f e d c j i h p With some discs, the icon 9 may be dis- played, meaning that the operation is inva- lid. 1 Displays the “ Function ” menu = F or details, refer to Using advanced func- tions on page 99. 2 Recalls equalize[...]

8 Skips forward or backward T ouching [ p ] skips to the start of the next chapter . T ouching [ o ] once skips to the start of the current chapter . T ouching it twice quickly will skip to the previous chapter . 9 Stops playback a Displays the DVD menu Y ou can display the menu by touching [ Menu ] or [ T op Menu ] while a disc is playing. T ouch-[...]

Searching for a specific scene and starting playback from a specified time Y ou can search for the scene you want by spe- cifying a title or a chapter , and the time. p Chapter search and time search are not available when disc playback has been stopped. 1 T ouch [Search] and then touch [Title] (title), [Chapter] (chapter), [Time] (time). 2 T ouch [...]

p If the touch panel keys for DVD menu selec- tion disappear , touching anywhere on the screen, then touch . The touch panel keys are displayed again. 2 T ouch [Enter]. Playback starts from the selected menu item. The way to display the menu differs depending on the disc. # If you touch [ Position ], the display position of touch panel keys is chan[...]

Each touch of [ L/R Select ] changes the set- tings as follows: ! L+R : Left and right ! L : Left ! R : Right ! Mix : Mixing left and right p This function is not available when disc playback has been stopped. 3 DVD setup adjustments = For details, refer to Displaying DVD/ DivX® Setup menu on page 105. En 100 Chapter 19 Playing a DVD-Video[...]

Y ou can play a DivX disc using the built-in drive of the navigation system. This section de- scribes those operations. Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 2 Insert the disc you want to play into disc-loading slot. The source changes and t[...]

Using the touch panel keys Playback screen (page 1) 7 9 a 8 6 5 4 3 2 1 Playback screen (page 2) f e d c b p With some discs, the icon 9 may be dis- played, meaning that the operation is inva- lid. 1 Switches the media file type played When playing a disc containing a mixture of various media file types, you can switch be- tween media file types to[...]

p If you want to display the touch panel keys and information of the current video again, touch anywhere on the LCD screen. 8 Skips forward or backward T ouching [ p ] skips to the start of the next file. T ouching [ o ] once skips to the start of the current file. T ouching it twice quickly will skip to the previous file. 9 Stops playback When [ g[...]

Starting playback from a specified time Y ou can search for a desired scene by specif y- ing the time. p Time search are not possible when disc playback has been stopped. 1 T ouch [Search]. 2 T ouch the keys to input the target num- ber or time and then touch [Enter]. ! T o select 5 minutes 3 seconds, touch [ 5 ], [ min ], [ 3 ], [ sec ] and [ Ente[...]

This chapter describes how to configure the DVD-V ideo/DivX player . Displaying DVD/DivX® Setup menu 1 Play the disc that contains DVD-Video or DivX. 2 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 3 T ouch . The “ Function ” menu appears. 4 T ouch [DVD/DivX® Setu[...]

Setting the aspect ratio There are two kinds of displays. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. If you use a regular rear display with a TV aspect of 4:3, you can set the aspect ratio suitable for your rear display. (W e recommend use of this function only when you wan[...]

p If you forget the registered code number , touch 10 times on the number input screen. The registered code number is can- celed, letting you register a new one. Setting the auto play When a DVD disc with DVD menu is inserted, this unit will cancel the DVD menu automati- cally and start playback from the first chapter of the first title. p This fun[...]

Language code chart for DVDs T wo-letter code, input code Language T wo-letter code, input code Language T wo-letter code, input code Language aa, 0101 Afar ia, 0901 Interlingua rn, 1814 Rundi ab, 0102 Abkhazian ie, 0905 Interlingue ro, 1815 Romanian af , 0106 Afrikaans ik, 0911 Inu piaq ru, 1821 Russian am, 0113 Amharic in, 0914 Indonesian rw , 18[...]

Y ou can play the compressed audio files stored in the external storage device (USB, SD). p In the following description, the SD mem- or y card and USB memory device are col- lectively referred to as the “ external storage device (USB, SD) ” . If it indicates the USB memor y device only , it is referred to as the “ USB storage device ” . St[...]

Setting a repeat play range Indicator Meaning Repeats all compressed audio files in the selected external sto- rage device (USB, SD). Repeats just the current file. Repeats the current folder . 3 Current file infor mation ! : Folder name Shows the folder name currently play- ing. ! : Artist name Shows the artist name currently playing (when availab[...]

Using the touch panel keys ( Music ) 9 8 7 2 5 6 4 13 1 Scans folders and files Scan play is per formed by touching only one key . = F or details of the operation, refer to Scans folders and files on the next page. 2 Plays files in random order The files in the current repeat play range can be played at random by touching only one key. = F or detai[...]

9 Switches the operation screen T apping this key switches between the screen to operate music files and the screen to oper- ate video files. This touch panel key is avail- able only when there are both audio and video files in the external storage device (USB, SD). Operating by hardware buttons Pressing the TRK button Y ou can skip files for ward [...]

Y ou can play the video files stored in the exter- nal storage device (USB, SD). p In the following description, the SD mem- or y card and USB memory device are col- lectively referred to as the “ external storage device (USB, SD) ” . If it indicates the USB memor y device only , it is referred to as the “ USB storage device ” . Starting pr[...]

Using the touch panel keys ( Video ) 1 34 2 9 8 7 56 1 Switches the operation screen T apping this key switches between the screen to operate music files and the screen to oper- ate video files. This touch panel key is avail- able only when there are both audio and video files in the external storage device (USB, SD). 2 Displays the “ Function ?[...]

9 Stops playback Searching for a specific scene and starting playback from a specified time Y ou can search for a desired scene by specif y- ing the time. 1 T ouch [Search]. 2 T ouch the keys to input the target num- ber or time and then touch [Enter]. ! T o select 5 minutes 3 seconds, touch [ 5 ], [ min ], [ 3 ], [ sec ] and [ Enter ] in order . ![...]

Using the USB inter face cable for iPod en- ables you to connect your iP od to the naviga- tion system. p A USB inter face cable for iP od (CD -IU51V) (sold separately) is required for connection. Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 2 Conn[...]

Shows the title of the current song. When a podcast is played, the episode is displayed (when available). ! : Chapter number Shows the current chapter number and total number of chapters when the file with chapters played (when available). ! Play time Shows the elapsed playing time within the current song (episode). p “ ------- ” is displayed i[...]

Using the touch panel keys Music f e c d b a 2 8 9 4 1 3 7 6 5 Video f e 8 9 g i 6 ah 1 Sets the shuffle play for music The shuffle play setting can be changed by touching only one key . = F or details, refer to Sets the shuffle play for music on page 123. 2 Sets a repeat play range The repeat play range can be changed by touching only one key . = [...]

T ouching the key displays the MusicSphere screen, and a playlist created with the PC ap- plication ( MusicSphere ) can be played. = F or details, refer to Playing Music- Sphere on page 122. 4 Selects a song to play Scrolling the keys up or down displays songs, and tapping a song starts playback. T apping the lower key during shuffle playback skips[...]

p If you want to display the touch panel keys and information of the current video again, touch anywhere on the LCD screen. i Displays the top category menu for video T ouching the key displays the top categor y for video playback. Displays the previously selected list If you select the video from the list to play after touching , touching the key [...]

2 Scroll by dragging tabs up or down to display the character that you want to re- fine. Character tabs 3 T ap the tab to select the character and display the page which includes applicable options. p An article listed below and space at the be- ginning of the artist name will be ignored and the next character will be taken into ac- count for searc[...]

Playing MusicSphere Y ou can play playlists created with the PC ap- plication ( MusicSphere ) using an exciting gra- phic inter face. p PC application ( MusicSphere ) will be avail- able on our website. Starting procedur e 1 Display the music operation screen of the iPod. = For details of the operation, refer to Starting procedure on page 127. 2 T [...]

! All : Repeats all songs or videos in the selected list. ! One : Repeats just the current song or video. 2 Sets the shuffle play for music This function shuffles songs or albums and plays them in random order . Each touch of [ Shuffle ] changes the setting as follows: ! Off : Does not shuffle. ! Songs : Plays back songs or videos in random order w[...]

Y ou can experience P andora by connecting an iP od that has the P andora application in- stalled. p Be sure to read Using App-based Connected Contents before you per form this opera- tion. = F or details, refer to Using App-based Connected Contents on page 217. Note: ! Certain functionality of the P andora service is not available when accessing t[...]

Shows the elapsed playing time within the current song. p “ ------- ” is displayed if there is no corre- sponding information. 2 Current time 3 Album artwork Album art of the current song is displayed if it is available. 4 Source icon Shows which source has been selected. En 125 Chapter 25 Using Pandora ® Using Pandora ®[...]

Using the touch panel keys 1 6 5 4 2 3 1 Selects a Pandora station fr om the list T ouching the key displays the list of your P andora stations to select one of them to play . = F or details, refer to Operating list scr eens (e.g. iP od list screen) on page 70. Scroll the list by dragging items up or down to display the item you want to select. p T[...]

When connecting iP od with the Aha Radio in- stalled, you can control, view , and/or hear Aha Radio content from this navigation system. Y ou can also display POI information from the Aha Radio application on the map screen and route to these POIs. p F or details concerning operations, refer to the Help and Tips section within the Aha Radio applica[...]

Reading the screen 4 1 2 3 1 Current station infor mation Shows which source has been selected. ! Station name Shows the name of the Aha Radio sta- tion that the navigation system is cur- rently tuned to. ! Detailed information Shows the information on the content currently being played. p “ ------- ” is displayed if there is no corresponding i[...]

Using the touch panel keys 12 5 6 3 4 1 Selects an Aha Radio station from the list T ouching this key displays the list of your avail- able Aha Radio stations. T ouch the desired Aha Radio station to change Aha sources. = F or details of the list operations, refer to Operating list screens (e.g. iP od list screen) on page 70. Scroll the list by dra[...]

Indicator Meaning T ouching the key unsubscribes the selected content. The unsub- scribed content will be deleted from the My Feeds station. T ouching the key follows the cur- rent content. The followed con- tent will be added to the My F eeds station. 5 Recalls equalizer curves = F or details, refer to Using the equalizer on page 175. 6 Pauses the[...]

Y ou can control the Bluetooth audio player . p Before using the Bluetooth audio player , you need to register and connect the device to this navigation system. = F or details, refer to Registering your Bluetooth devices on page 56. p Operations may var y depending on the kind of a Bluetooth audio player . p Depending on the Bluetooth audio player [...]

Setting a repeat play range Indicator Meaning Does not repeat. Repeats just the current file. Repeats all audio files in the Bluetooth audio player . 2 Current file infor mation If the connected Bluetooth audio player fea- tures AVRCP 1.3, the following file information will be displayed. ! : Artist name Shows the artist name currently playing (whe[...]

Using the touch panel keys 12 54 6 3 1 Plays files in random order All of the files within the repeat play range can be played at random by touching only one key . p This function is available only when the connected Bluetooth audio player fea- tures AVRCP 1.3. = F or details, refer to Plays files in ran- dom order on the next page. 2 Sets a repeat[...]

Using advanced functions p This menu is available only when the con- nected Bluetooth audio player features AVRCP 1.3. % T ouch on the “ Audio ” screen. The “ Function ” menu appears. 1 2 1 Changes the repeat range Each touch of [ Repeat ] changes the setting as follows: ! All : Repeats all audio files in the Bluetooth audio player . ! T ra[...]

Y ou can use the navigation system to control an XM satellite digital tuner , which is sold se- parately . F or details concerning operation, refer to the XM tuner ’ s operation manuals. This section provides information on XM operations with the navigation system which differs from that described in the XM tuner ’ s operation man- ual. The fol[...]

Shows the title of the current song (pro- gram). p “ ------- ” is displayed if there is no corre- sponding information. 3 Current time 4 XM station information ! XM station name logo ! XM channel number ! Preset number Shows what preset item has been se- lected. 5 XM channel category Shows the categor y of broadcast channel. 6 XM channel select[...]

Using the touch panel keys All CH Mode c a b 9 8 6 7 4 5 3 2 11 Category Mode c a b 9 8 6 7 4 e 5 3 2 dd 1 Perform s manual tuning The channels move up or down one at a time. p If you keep touching [ o ]o r[ p ] you can skip the broadcasting channels. 2 Switches between the A V operation screen and the pr eset list display Y ou can switch the scree[...]

= F or details of the operation, refer to Switching between the AV operation screen and the list screen on page 70. 3 Memorizes the current song = F or details, refer to Memorizing the song on the next page. 4 Recalls channels from the pr eset Once you have stored broadcast channels, you can easily recall preset channels from memory with a tap of a[...]

Storing and recalling br oadcast stations With a tap of any of the preset tuning keys ( “ P1 ” to “ P6 ” ), you can easily store up to six broadcast channels for later recall (also with the tap of a key). 1 Select the channel that you want to store in memory . 2 Display the preset channel list. = For details, refer to Switches between the A[...]

p The memorized title may not be displayed correctly depending on the conditions. p Y ou can customize the setting for the mem- orized songs later . = For details concerning operations, refer to Setting the memorized songs on this page. When the memorized song is broadcast A beep sounds, and a message is displayed. T ouch [ Ye s ] to switch to that[...]

Y ou can use the navigation system to control a Pioneer Sirius Satellite Radio tuner , which is sold separately . F or details concerning operation, refer to the SIRIUS tuner ’ s operation manuals. This sec- tion provides information on SIRIUS opera- tions with navigation system which differs from that described in the SIRIUS tuner ’ s op- erat[...]

Using the touch panel keys All CH Mode b a 9 7 8 5 6 4 2 3 1 Category Mode b a 9 7 8 5 c 6 4 2 3 1 1 Switches the SIRIUS Instant replay mode = F or details, refer to Using the “ Instant Replay ” function on page 144. 2 Perform s manual tuning The channels move up or down one at a time. p If you keep touching [ o ]o r[ p ] you can skip the broad[...]

4 Memorizes the current song = F or details, refer to Memorizing the song on the next page. 5 Recalls channels from the pr eset T ap to recall the preset channel. = F or details, refer to Storing and recalling broadcast stations on this page. 6 Switches the SIRIUS display Each touch of [ Disp ] changes the display in- formation. Channel number — [...]

3 Keep touching a preset tuning key [Preset 1] to [Preset 6]. The selected station has been stored in mem- or y . The next time you tap the same preset tuning key “ Preset 1 ” to “ Preset 6 ” the station is re- called from memor y . p Up to 18 stations, six for each of three SIR- IUS bands can be stored in memor y . Using the song alert fun[...]

Operating by hardware buttons Pressing the TRK button Y ou can move the channel up or down. During “ Instant Replay ” mode, you can skip the song or program forward or backward. Pressing and holding the TRK button Y ou can move channels up or down by holding down the button. During “ Instant Replay ” mode, you can per- form fast reverse or [...]

1 T ouch [Game Alert]. 2 T ouch [ c Prev] or [Next d ] to select the league. 3 T ouch [ c Prev] or [Next d ] to select the team. 4 T ouch [On/Off]. The team displayed as [ On ] is the alert target. p When the selected team is excluded from the alert target, the team is displayed as [ Off ]. Up to 12 teams can be selected. If you have already select[...]

Y ou can display the video image output by the equipment connected to the navigation sys- tem. For details of the connection method, refer to Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. T o view video images, you must stop in a safe place and apply the parking brake. Reading the sc[...]

The term “ external unit ” refers to future Pioneer devices that are not currently planned for , or to devices that allow control of basic functions although they are not fully con- trolled by the navigation system. T wo external units can be controlled by this navigation sys- tem. When two external units are connected, the navigation system al[...]

Using the touch panel keys 13 4 5 6 2 1 Recalls equalizer curves = F or details, refer to Using the equalizer on page 175. 2 Sends a band command T ouch to send a band command to the exter- nal unit. p Operation varies depending on the ex- ternal unit connected. (In some cases, the external unit may not respond.) 3 Uses [ F1 ] through [ F4 ] to ope[...]

Displaying the screen for navigation settings 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Settings]. The “ Settings Menu ” screen appears. p This can also be operated using the “ Short- cut Menu ” screen. 3 T ouch [Navi Settings]. The “ Navi Settings ” menu appears. 4 T ouch the item that you want to chang[...]

When the gear lever is shif ted to “ R ” , the signal switches to “ High ” or “ Low ” . (One of these is displayed depending on the vehicle.) Checking sensor learning status and driving status p The navigation system can automatically use its sensor memor y based on the outer dimensions of the tires. 1 Display the “ Navi Settings ” [...]

4 T ouch [All]. Clears all leaning results. p T ouch [ All ] for the following cases: ! After changing the installation position of the navigation system ! After changing the installation angle of the navigation system ! After moving the navigation system to another vehicle # If you touch [ Distance ], all learned results stored in “ Distance ”[...]

If the entries reach the maximum number , a new entr y will overwrite the oldest one. These calculations are based only on the infor- mation that you provide and not on any data from the vehicle. The fuel mileage displayed is only a reference value, and does not guarantee the fuel mileage displayed can be obtained. 1 Display the “ Navi Settings ?[...]

4 T ouch [Export]. After a message confirming whether to export the data appeared, exporting the data to the SD memor y card starts. The “ Gas Mileage Setting ” screen appears when it is done. Recording your travel history Activating the track logger enables you to re- cord your driving histor y (called “ track log ” below). Y ou can review[...]

1 Display the “ Navi Settings ” screen. = For details, refer to Displaying the screen for navigation settings on page 150. 2 T ouch [Set Home]. The “ Set Home ” screen appears. 3 T ouch [Home]. The “ Select Search method ” screen appears. # If you touch [ Phone# ], you can edit your home phone number . p [ Phone# ] is only available whe[...]

! Off (default): No message appears and no sound beeps when the vehicle experiences a sudden start. ! On : A message appears and a sound beeps when the vehicle experiences a sudden start. = For details, refer to Sudden start alert on page 33. Clear Eco Record F uel consumption data are cleared. 4 T ouch [OK]. The settings are complete. Displaying t[...]

1 Display the “ Map Settings ” screen. = For details, refer to Displaying the screen for map settings on the previous page. 2 T ouch [Displayed Info]. The “ Displayed Information ” screen appears. 3 T ouch [City Map]. Each time you touch the key changes the set- ting. ! On (default): Automatically switches to the city map when in a city map[...]

Displaying the Bluetooth connection icon Selects whether to display or hide the icon for current status of the phone connection via Bluetooth wireless technology. Bluetooth connection icon 1 Display the “ Map Settings ” screen. = For details, refer to Displaying the screen for map settings on page 156. 2 T ouch [Displayed Info]. The “ Display[...]

1 Display the “ Map Settings ” screen. = For details, refer to Displaying the screen for map settings on page 156. 2 T ouch [Displayed Info]. The “ Displayed Information ” screen appears. 3 T ouch [3D Land Mark]. Each time you touch the key changes the set- ting. ! On (default): Displays the 3D landmark on the map. ! Off : Hides the 3D land[...]

3 T ouch [Display] to change the setting to “ On ” . p If you do not want to display the POI icon on the map, touch [ Display ] to turn it “ Off ” . (Even if “ Display ” is turned “ Off ” , the POI selection setting is retained.) 4 T ouch [POI]. The “ Overlay POI (Main Category) ” screen appears. 5 T ouch the main category you w[...]

4 T ouch [Display] to change the setting to “ On ” . p If you do not want to display the POI icon on the map, touch [ Display ] to turn it “ Off ” . (Even if “ Display ” is turned “ Off ” , the POI selection setting is retained.) 5 T ouch [Custom POI]. The list of POI categories appears. 6 T ouch the items you want to display . 7 T [...]

2 T ouch [AV Guide Mode]. Each time you touch the key changes the set- ting. ! On (default): Switches from the AV operation screen to the map screen. ! Off : Does not switch the screen. p This setting is effective only when “ Close Up View ” is set to “ On ” . Selecting the “ Quick Access ” menu Select items to display on the map screen[...]

2 T ouch [Settings]. The “ Settings Menu ” screen appears. p This can also be operated using the “ Short- cut Menu ” screen. 3 T ouch [System Settings]. The “ System Settings ” screen appears. 4 T ouch the item that you want to change the setting. # If you touch , the previous screen returns. Customizing the regional settings 1 Display [...]

4 T o set the time difference, touch [+] or [ – ]. The time difference between the time origin- ally set in the navigation system (P acific Stan- dard Time) and the current location of your vehicle is shown. If necessary, adjust the time difference. T ouching [ + ]o r[ – ] changes the time difference display in half-hour incre- ments. The time [...]

Setting the V olume for Guidance and Phone The sound volume for the navigation can be set. Y ou can separately set the volume of the route guidance and the beep sound. 1 Display the “ System Settings ” screen. = For details, refer to Displaying the screen for system settings on page 162. 2 T ouch [V olume]. The “ V olume Settings ” screen a[...]

p Proper compatibility with allowable files is not guaranteed. p Imported original images will be stored in the built-in memor y , but the ability to save these images cannot be guaranteed com- pletely . If your original image data is de- leted, insert the SD memor y card again and re-import the original image. p The maximum number of images, inclu[...]

3 T ouch [Camera]. This changes the setting to “ On ” . p Y ou can only switch to “ Rear View ” if this setting is “ On ” . 4 T ouch [Polarity] to select an appropriate setting for polarity . Each time you touch [ Polarity ] switches be- tween the following polarity: ! Battery : When the polarity of the con- nected lead is positive whil[...]

Creating a user -defined color and storing it to memory Y ou can create a user-defined color and set it as the illumination color . 1 Display the “ System Settings ” screen. = For details, refer to Displaying the screen for system settings on page 162. 2 T ouch [Illumi Color]. The “ Illumination Color ” screen appears. 3 T ouch [Custom]. Th[...]

— All sounds cannot be output for rear dis- play . — When playing back video files on the ex- ternal storage device (USB, SD), the video image is not output. p When “ DISC ” is selected, the following re- striction is applied to rear display. — When a CD or MP3/WMA/AAC disc is set in the built-in DVD drive, only the sound is output. p Whe[...]

— AM / FM / CD / ROM / iPod (Music)/ SD (audio)/ USB (audio)/ Bluetooth audio / XM / SIRIUS / HD Radio / EXT1 (audio), EXT2 (audio)/source off screen/menu screens/others ! Video sour ce — AV 1 and iPod (Video) — DVD-V and DivX — SD (Video) and USB (Vid eo) — AV 2 (Video) and EXT1 (Video ), EXT2 (Video) — Rear view camera image ! Map scr[...]

! iPod : iP od connected with the USB Inter- face cable for iP od (CD-IU51V) (sold sepa- rately) ! Video : External video component ! Off : No video component is connected. p Use “ A V1 Input ” when connecting CD- RM10 (sold separately) through the external video component. Setting video input 2 ( AV 2 ) Y ou can switch this setting according t[...]

p Both rear speaker leads output and RCA rear output are switched simultaneously in this setting. (When you use the product without RCA rear output, this setting only applies to the rear speaker leads.) p “ Rear SP ” can be set only when the source is selected to “ Off ” . 1 Display the “ A V System Settings ” screen. = For details, ref[...]

! 20dB : The volume becomes 1/10. ! 10dB : The volume becomes 1/3. ! All : The volume becomes 0. p When you select “ All ” , no audio adjust- ments are possible during the sound is turned off . p When you select “ 20dB ” or “ 10dB ” ,n o audio adjustments are possible during the sound is attenuated. p AV source volume returns to normal [...]

1 Display the “ A V System Settings ” screen. = For details, refer to Displaying the screen for A V system settings on page 170. 2 T ouch [VR Catalog Menu]. 3 T ouch [On] or [Off] to activate or deacti- vate “ VR Catalog Mode ” . # If you touch [ Pause ], the cataloging of iPod stops. If you want to restart the cataloging of iP od, touch [ [...]

3 T ouch [AV Sound]. The “ A V Sound Settings ” screen appears. p Y ou cannot make adjustments in the follow- ing situations: ! AV source is “ Off ” . ! During muting/attenuation 4 T ouch the item that you want to change the setting. # If you touch , the previous screen returns. Using balance adjustment Y ou can select a fader/balance setti[...]

Equalizer curve V ocal is a cur ve in which the midrange, which is the human vocal range, is boosted. Flat is a flat curve in which nothing is boosted. Custom1 is an adjusted equalizer curve that you cre- ate. A separate custom curve can be created for each source. Custom2 is an adjusted equalizer curve that you cre- ate. If you select this curve, [...]

1 Display the “ A V Sound Settings ” screen. = For details, refer to Displaying the screen for A V sound settings on page 174. 2 T ouch [EQ]. 3 T ouch one of the keys to select a curve that you want to use as the basis of custo- mizing. 4 T ouch [Customize]. 5 T ouch the frequency that you want to adjust the level. 6 T ouch [ a ]o r[ b ] to adj[...]

Before operating the Auto EQ function ! Perform Auto EQ in as quiet a place as pos- sible, with the vehicle engine and air condi- tioning switched off . Also, cut power to car phones or cellular phones in the vehicle, or remove them from the vehicle before per- forming Auto EQ. Sounds other than the measurement tone (surrounding sounds, engine soun[...]

3 T urn the ignition switch to ON or ACC. If the vehicle ’ s air conditioner or heater is turned on, turn it off . Noise from the fan in the air conditioner or heater may prevent correct Auto EQ. 4 T urn off the A V source. = For details of the operations, refer to Dis- playing the A V operation screen on page 70. 5 Set the video setting for the [...]

p When “ Left ” is set, the left speaker output is delayed. When “ Right ” is set, the right speaker output is delayed. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Display the “ A V Sound Settings ” screen. = For details, refer to Displaying the screen for A V sound setting[...]

1 Compare the FM tuner volume level with the level of the source you wish to ad- just. 2 Display the “ A V Sound Settings ” screen. = For details, refer to Displaying the screen for A V sound settings on page 174. 3 T ouch [SLA]. 4 T ouch [+] or [ – ] to adjust the source vo- lume. “ +8dB ” to “ – 8dB ” is displayed as the source vo[...]

p This function is available for AVIC -Z130BT only . T o Ensure Safe Driving CAUTION For your safety , avoid viewing the screen in the voice operation as much as possible while driving. If you use voice operation, select “ US English ” or “ US English (Samantha):TTS ” in “ V oice Language ” of “ Regional Settings ” . If you se- lect[...]

1 V oice help menu: Displays a list of commands for the voice operation. 2 V oice operation condition indicator: When is indicated, the navigation sys- tem can recognize your voice commands. 3 : T ouch to listen to the brief operating in- struction. 4 : T ouch to cancel the voice operation . Y ou can cancel the voice operation feature at any time b[...]

4 Say “ Point of interest ” . The list of POI categories appears. 5 Say the category that you want to set to your destination. The list of candidates with number appears. 6 Say the number that you want to select. Y our navigation system sets the route to your destination, and the map of your surroundings appears. Calling the entry on the phone [...]

A vailable basic voice commands The navigation system can also recognize the words in the following list. p T erms written in italics are voice commands. Basic commands V oice commands and operations Back d The previous screen returns. Cancel d Cancels the voice operation. Help d Outputs the brief operating instruction by voice. Next page , P revio[...]

V oice commands and operations Browse playlists d Displays the playli st together with sub-scree n to continue the voice operation. d Say the desired voice commands. Browse the playlist <Playlist name> d Displays the song list of the selected playlist together with sub-screen to continue the voice operation. d Say desired voice commands. Brow[...]

V oice commands related to hands-free phoning p Y ou can make a phone call by voice dialing if the cellular phone featurin g Bluetooth wireless technology is being paired with the navigation system. p For <entry ’ s name> shown on the following chart, say the name of the entr y stored in “ Contacts ” . p For <phone number> shown o[...]

Tips for the voice operation F or your voice commands to be correctly re- cognized and interpreted, ensure that condi- tions are suitable for recognition. Close the vehicle windows Please note that wind through the vehicle win- dow or miscellaneous noise from outside the vehicle can inter fere with voice operation. Position the microphone carefully[...]

Setting the anti-theft function Y ou can set a password for the navigation sys- tem. If the back-up lead is cut after the pass- word is set, the navigation system prompts for the password at the time of next boot up. Setting the password 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Settings]. The “ Settings Menu ” [...]

Returning the navigation system to the default or factory settings Y ou can return settings or recorded content to the default or factor y settings. There are some methods to clear user data, and the situations and the cleared content are different for each method. F or information regarding the content that is cleared by each method, see the list [...]

Setting items to be deleted The items to be deleted vary depending on the reset method. The items listed in the following table re- turn to the default or factor y settings. Any items not listed below will be retained. — : The setting will be retained. 1 : The setting will be cleared and returned to the default or factor y settings. p Bold indica[...]

Navigation functions Method 1 Method 2 Method 3 Method 4 Bluetooth Set- tings All settings (*1) — 111 Phone Menu All settings (*1) — 111 Other functio ns Anti-theft password ———— (*1) All stored data of 5 users is deleted. AV functions Method 1 Method 2 Method 3 Method 4 V olume 1 ——— AV Settings Wide Mode , Mute , VR Cata- log Me[...]

T roubleshooting If you have problems operating your navigation system, refer to this section. The most common problems are listed below , along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized P ioneer ser vice facility . Problems with the navigation screen Symptom [...]

Symptom Cause Action (Reference) Y ou cannot position your vehicl e on the map without a significant positioning error . Something covers the GPS antenna. Do not cover the GPS antenna with spray paint or vehicle wax, because this may block the reception of GPS signa ls. Snow buildup can also degrade the signals. Signals from the vehicle ’ s speed[...]

Symptom Cause Action (Reference) There ’ s no picture. The parking brake cord is not con- nected. Connect the parking brake cord, and apply the parking brake. The parking brake is not applied. Connect the parking brake cord, and apply the parking brake. The backlight of the LCD panel is turned off . T urn on the backlight. (Page 181) Rear display[...]

Symptom Cause Action (Reference) No video output from connected equipment. No video output from connected iP od. “ A V1 Input ” or “ AV2 Input ” setting is incorrect. Correct the settings. (Page 147) The connection of the USB inter face cable for iP od is incorrect. Connect both the USB plug and the RCA cable side. (If only one of these con[...]

Problems with the phone screen Symptom Cause Action (Reference) Dialing is not pos sible because the touch panel keys for dialing are inactive. Y our phone is out of range for ser- vice. Retry after re-ent ering the range for service. The connection between the cellular phone and the navigation system cannot be established now. Perform the connecti[...]

Messages and how to react to them The following messages may be displayed by your navigation system. Refer to the table below to identify the problem, then take the suggested corrective action. There are occasions when you may see error messages other than those shown here. In such a case, follow the instructions given on the display. Messages for [...]

Message Cause Action (Reference) Connection failed. The cellular phone ’ s Bluetooth wire- less technology is turned off. Activate the target phone ’ s Bluetooth wire- less technology. The cellular phone is paired (con- nected) with another device. Cancel the pairing (connectio n) and retry. Rejection has been received from the cellular phone. [...]

Messages for audio functions When problems occur with AV source playback, an error message appears on the display . Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center . The messages in “ () ” w[...]

Message Cause Action (Reference) Cannot play back all tracks All the files on the inserted external storage device are secured by DRM. Store playable files. All of the files cannot be playe d by this unit. Replace it with the playable file. (P age 211, P age 228) USB flash drive was discon- nected for device protection. Do not connect this USB flas[...]

Positioning technology Positioning by GPS The Global P ositioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 68 900 000 feet (21 000 km), continually broad- casts radio signals giving time and position in- formation. This ensures that signals from at least three can be picked up [...]

Map matching As mentioned, the positioning systems used by this navigation system are susceptible to certain errors. Their calculations may , on occa- sion, place you in a location on the map where no road exists. In this situation, the processing system understands that vehicles travel only on roads, and can correct your position by ad- justing it[...]

Conditions likely to cause noticeable positioning errors F or various reasons, such as the state of the road you are traveling on and the reception status of the GPS signal, the actual position of your vehicle may differ from the position dis- played on the map screen. ! If you make a slight turn. ! If there is a parallel road. ! If there is anothe[...]

! If you are on a steep mountain road with many height changes. ! If you enter or exit a multi-storey parking lot or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si- milar structure. ! If your vehicle ’ s wheels spin, such as on a gravel road or in snow . ! If you put on chains, or change your tires for one[...]

Route setting information Route search specifications Y our navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some use- ful information about how a route is set. CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for d[...]

Built-in drive and care ! Use only conventional, fully circular discs. Do not use shaped discs. ! Do not use cracked, chipped, warped, or otherwise damaged discs as they may da- mage the built-in drive. ! When using discs that can be printed on label sur faces, check the instructions and the warnings of the discs. Depending on the discs, inserting [...]

p is a trademark of DVD F ormat/Logo Licensing Corporation. p It is not possible to play DVD-Audio discs. This DVD drive may not be able to play all discs bearing the marks shown above. A VCHD recorded discs This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Defi- nition) format. Do not insert A VCHD discs. If inser[...]

CD-R/CD-RW discs ! Unfinalized discs cannot be played back. ! It may not be possible to playback CD-R/ CD-RW discs recorded on a music CD re- corder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, scratches or condensation on the lens of the built-in drive. ! Playback of discs recorded on a personal c[...]

Notes specific to DivX files ! Only DivX files downloaded from DivX part- ner sites are guaranteed for proper opera- tion. Unauthorized DivX files may not operate properly . ! DRM rental files cannot be operated until playing back is started. ! The navigation system corresponds to a DivX file display of up to 1 590 minutes 43 seconds. Search operat[...]

Media compatibility chart General Media CD-R/-RW DVD -R/-RW/-R DL USB storage de- vice SD memory card File system ISO9660 level 1, ISO9660 level 2, Romeo and Joliet ISO9660 level 1, ISO9660 level 2, Romeo, Joliet and UDF 1.02 FA T16/FA T32 Maximum number of folders 700 300 Maximum number of files 999 3 500 2 500 Playable file types MP3, WMA, AAC, D[...]

WMA compatibility Media CD-R/-RW DVD -R/-RW/-R DL USB storage de- vice SD memory card File extension .wma Bit rate 5 kbps to 320 kbps (CBR), VBR Sampling frequency 8 kHz to 48 kHz Note: The navigation system is not compat ible with the following: Windows Media ™ Audio 9 Professional, Lossless, Voice WA V compatibility Media CD-R/-RW DVD -R/-RW/-R[...]

DivX compatibility Media CD-R/-RW DVD -R/-RW/-R DL USB storage de- vice SD memory card File extension .avi/.divx DivX files on the external storage device (USB, SD) cannot be played. Profile (DivX version) Home Theater Ver . 3.11/Ver . 4.x/Ver . 5.x/ V er . 6.x Compatible audio codec MP3, Dolby Digital Bit rate (MP3) 8 kbps to 320 kbps (CBR), VBR S[...]

Video files compatibility (USB, SD) File extension .avi .mp4, .m4v .wmv Format MPEG-4 MPEG -4 H.264 WMV Compatible video codec MPEG-4 MPEG -4 H.264 WMV Compatible audio codec Linear PCM (LPCM), IMA- ADPCM MP3 AAC AAC WMA Recommended video specifica- tions Image size: QVGA (320 pixels x 240 pixels) Bit rate: 768 kbps F rame rate: 30 fps Bit rate: 76[...]

Example of a hierarchy The following figure is an example of the tier structure in the disc. The numbers in the fig- ure indicate the order in which folder numbers are assigned and the order to be played back. : Folder :F i l e 1 2 3 4 5 6 L e v e l 1 L e v e l 2 L e v e l 3 L e v e l 4 Notes ! This product assigns folder numbers. The user cannot a[...]

HD Radio ™ T echnology ! AVIC -Z130BT HD Radio T echnology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign P atents. HD Radio ™ and the HD, HD Radio, and “ Arc ” logos are pro- prietar y trademarks of iBiquity Digital Corp. ! AVIC -X930BT , AVIC -X9310BT HD Radio ™ , HD Radio Ready ™ and HD Radio Ready log[...]

AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG -2 and MPEG-4. Sev- eral applications can be used to encode AAC files, but file formats and extensions differ de- pending on the application which is used to encode. This unit plays back AAC files en- coded by iT unes. Detailed informati[...]

Limitations: ! Access to app-based connected contents will depend on the availability of cellular and/or WiFi network coverage for the purpose of al- lowing your iPhone to connect to the Internet. ! Service availability may be geographically lim- ited to the U.S. Consult the connected content service provider for additional information. ! Ability o[...]

LED (light-emitting diode) backlight A light emitting diode is used inside the dis- play to illuminate the LCD screen. ! At low temperatures, using the LED back- light may increase image lag and degrade the image quality because of the character- istics of the LCD screen. Image quality will improve with an increase in temperature. ! The product lif[...]

Display information Destination Menu Page Address 35 Return Home 37 POI Gas Station 37 Bank Coffee Hotel Spell Name 37 Near Me 38 Near Destination 38 Around City 38 AVIC FEEDS 40 Favorites 39, 47 History 40, 50 Cancel Route 46 T raffic 51 Coordinates 40 Route Overview 43 Phone Menu Page Dial Pad 61 Call Home 62 Contacts 62 Contacts T ransfer 65 Rec[...]

Settings Menu Page Navi Settings 150 System Settings 162 AV Settings 170 AV Sound 174 Map Settings 156 Bluetooth Settings 66 Setting Replicator 181 Navi Settings menu Page Connection Status 150 3D Calibration Status 151 Gas Mileage 152 Drive Log Settings 154 Demo Mode 154 Set Home 154 Modify Current Location 155 Eco Settings 155 En 221 Appendix App[...]

System Settings menu Page Regional Settings Program Language , V oice Lan- guage 163 Time 163 km / mile 164 Average Speed 164 V olume 165 Splash Screen 165 Back Camera 166 Screen Calibration 167 Illumi Color 167 Service Information 168 Restore Factory Settings 190 Map Settings menu Page Displayed Info Close Up View 156 City Map 156 City Map Barrier[...]

Bluetooth Settings menu Page Connection 59 Registration 56 Device Name 66 Password 66 Bluetooth On/Off 67 Echo Cancel 67 Page Auto Answer Preference 67 Refuse All Calls 67 Clear Memory 68 Firmware update 68 A V System Settings menu Page AV1 Input 170 AV2 Input 171 Wide Mode 171 Auto EQ Meas. 177 Mute 172 Mute Level 172 Rear SP 171 DivX® VOD 174 VR[...]

A V Sound Settings menu Page FAD/BAL ( Balance ) 175 EQ 175 Loudness 180 Sub Woofer 180 HPF 180 SLA 180 Bass Booster 181 Sonic Center Control 179 En 224 Appendix Appendix[...]

Glossary AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Aspect ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence an[...]

ISO 9660 format This is the international standard for the for- mat logic of DVD/CD-ROM folders and files. F or the ISO9660 format, there are regulations for the following two levels: ! Level 1: The file name is in 8.3 format (the name consists of up to eight characters, half-byte English capital letters, half-byte numerals and the “ _ ” sign, [...]

Region number DVD players and DVD discs feature region numbers indicating the area in which they were purchased. Playback of a DVD is not pos- sible unless it features the same region num- ber as the DVD player . Route setting The process of determining the ideal route to a specific location; route setting is done auto- matically by the system when[...]

Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 10.8 V to 15.1 V DC) Grounding system ................... Negative type Maximum current consumption ........................................... 10.0 A Dimensions (W × H × D): AVIC -Z130BT Chassis ..................... 178 mm × 100 mm × 165 mm (7 – 3/[...]

Subwoofer: F requency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/ 125 Hz Slope .................................... – 18 dB/oct Gain ...................................... – 24/+6 dB Phase .................................. Normal/Reverse Bass boost: Gain ...................................... 0 dB to +12 dB DVD Drive System ..........[...]

Signal-to-noise ratio ..... 80 dB (digital broadcasting) (IEC -A network) 62 dB (analog broadcasting) (IEC -A network) AVIC -X930BT , AVIC -X9310BT F requency ran ge ............ 530 kHz to 1 710 kHz (10 kHz) Usable sensitivity ........... 25 µV (S/N: 20 dB) Signal-to-noise ratio ..... 62 dB (IEC -A ne twork) T raffic tuner (AVIC-Z130BT) Rated pow[...]

En 231[...]

PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanagaw a 212-0031, JAP AN PIONEER ELECTRONICS (USA) INC. P .O. Bo x 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-91 20 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. L TD. 253 A[...]