PLUS Vision KG-PS100S manuel d'utilisation

IMPORT ANT * DLP ® (Digital Light Processing) and DLP ® chip are registered trademarks of T exas Instru-ments Incor porated (U .S.A.). * V GA and XGA are trademarks or registered trademarks of Inter national Business Machines Cor poration (U .S.A.). * S-V GA is a registered trademark of Video Electronics Standards Association. * Microsoft, Window[...]

DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Address: Tel. No.: PLUS [...]

E-2 IMPORT ANT SAFETY INFORMA TION Hg: Lamp in This Pr oduct Contains Mercury . Dispose of Lamp Accor ding to Local, State or Federal Law . Precautions Please read this manual carefully bef ore using your KA GA COMPONENTS Data Projector and keep the manual handy for future ref erence. This user's manual co vers models KG-PS100S, KG-PS120X, and[...]

E-3 IMPORT ANT SAFETY INFORMA TION W ARNING This is a class A product. In a domestic environment this product ma y cause radio interference in which case the user ma y be required to take adequate measures. RF Interference W ARNING The F ederal Communications Commission does not allow an y modifications or changes to the unit EXCEPT those specified[...]

E-4 Important Safeguards These saf ety instr uctions are to ensure the long lif e of the unit and to prev ent fire and shock. Please read them carefully and heed all warnings. Installation • For best results , use the unit in a darkened room. • Place the unit on a flat, le vel surface in a dry area aw ay from dust and moisture . • Do not plac[...]

E-5 Major Featur es 䡵 High-brightness, lightweight pr ojector with wireless network presentation and PC-less presentation functions The synergy of DLP ® technology and the unique optical design raises the efficiency of light usage . One DLP ® chip reproduces the three primary colors (red, green, and blue) required in the expression of color . T[...]

E-6 T able of Contents IMPORT ANT SAFETY INFORMA TION ................................................................................... E-2 Major Features ................................................................................................................. ...... E-5 T able of Contents .................................................[...]

E-7 T able of Contents View ........................................................................................................................... ............ E-46 Aspect Ratio .............................................................................................................. E-46 Filter ............................................[...]

E-8 Checking the Supplied Accessories Remov e the main unit and the accessor ies from the bo x and check that the f ollowing items are included. “W ARNING” Handling the cables supplied with this pr oduct, will ex- pose y ou to lead, a chemical known to the State of Cali- f ornia to cause bir th defects or other repr oductive harm. W ash hands a[...]

E-9 Checking the Supplied Accessories Storage case (for pr ojector and accessories) [1] This case is designed to hold the projector itself and its acces- sories. Use it when storing the projector . User’ s Manual (CD-R OM edition) [1] User’ s Manual (Simplified Edition) [1] Security Sheet [1] Security Label [1] S O U R C E K E Y S T O N E A U T[...]

E-10 Names of the Main Unit Parts S O U R C E K E Y S T O N E A U T O K E Y S T O N E P O W E R S T A N D B Y ST A TU S M E N U Q U IC K M E N U Adjuster button [E-25] Focus ring [E-25] Exhaust vents F ront adjuster [E-25] Lamp cover [E-59] Remote control sensor [E-13] Lens V entilation slots Rear adjusters [E-25] Speaker Lens cov er Zoom ring [E-2[...]

E-11 Names of the Main Unit P ar ts S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY STA TUS MENU QUICK MENU S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY ST ATUS MENU QUICK MENU SD CARD S-VIDEO VIDEO AUDIO COMPUTER IN USB slot See Page 15 (“Image Viewer / Wireless Network” section) A UDIO connector [E-20] C[...]

E-12 Names of the Remote Contr ol Parts Precautions Handling of the Remote Control * Do not drop the r emote control or handle it inappropriately . * Do not expose the remote contr ol to water or other liquids. Should the remote contr ol become wet, wipe it dry immediately . * T ry to avoid use in hot and/or humid locations. * Please keep button ba[...]

E-13 Using the remote contr ol for the first time The battery compar tment is fitted with a transpor tation insulation sheet at the time of shipping. Pull out the sheet and remov e it. The remote control is now ready for use . Replacement Method 1 (A) With the knob pressed to the right side, (B) draw out the battery case. 2 Remove the old battery a[...]

E-14 The Pr ocedure Up to Pr ojecting to the Screen P erform setup adjustments in the f ollowing order . 1 Position the pr ojector Determine the locations to set up the screen and the projector. See “ Placement Guide ” on P age E-15. 2 Connect the video equipment and personal computer Connect your equipment to the pr ojector . When making conne[...]

E-15 Placement Guide • Use this information as a guide to find out about the screen size when the pr ojector is placed at a cer tain location, or to find out the appro ximate siz e of a screen that will be required. • The projection distance over whic h focussing is adjustable is 1.20 m (3.9 feet) to 11.78 m (38.65 feet). The projector should b[...]

E-16 Connecting Personal Computers and V ideo Equipment Connecting this unit with a personal computer permits presentation data to be pr ojected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a D VD player or other video equip- ment source in combination with an audio/video amplifier[...]

E-17 Connecting P ersonal Computers and Video Equipment T o Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer startup procedure as well as the operation that follo ws notebook star tup. Please consult the ins[...]

E-18 VIDEO S-VIDEO Connecting P ersonal Computers and Video Equipment Connections with Composite Signals Video Equipment with VIDEO Connectors • Connect to the projector ’ s VIDEO connector using a commercially a vailable video cab le. • The input setting of the VIDEO connector has been set to “ Auto ” at the factory; ho wev er , if the p[...]

E-19 Cr Cb Y Pr Pb Y COMPONENT COMPONENT Connecting P ersonal Computers and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector • The projector has been set to “ Auto ” at the factory; howe ver , if it does not project, please change the input setting to “ Compo- nent ” usin[...]

E-20 R L AUDIO OUT Connecting P ersonal Computers and Video Equipment Connections with the AUDIO Jack * Connect to the projector ’ s A UDIO jack using a commercially av ailable audio cable . When the audio jac k of the equipment that is to be connected is of the RCA phono type, mak e connection via the supplied audio conv ersion adapter. * The b [...]

E-21 Power Cable Connections and Switching the Power On/Of f There is an order in whic h the power cable is connected and the power is s witched on/off. S O U R C E K E Y S T O N E A U T O K E Y S T O N E P O W E R S T A N D B Y S T A T U S M EN U Q U I C K M E N U Firmly plug in all the wa y . T o wall outlet Operating 1 Connect the A C IN connect[...]

E-22 When [Menu Language Select] is Displayed Upon Switching On the Power The first time the power is s witched on after purchase, [Menu Lan- guage Select] will be displa yed. Follo w the procedure descr ibed be- low and select the displa y language of the projector . If the image is blurred, turn the f ocus r ing counterclockwise or cloc k- wise t[...]

E-23 P ower Cable Connections and Switching the P ower On/Off Finishing 1 Switch off the power of the connected equip- ment 2 Switch off the power of the pr ojector Press the POWER/ST ANDBY button. The message display appears . One more press of the PO WER/ST ANDBY button as described in the message will switch off the projection screen and cause t[...]

E-24 Adjustment of the Pr ojection Screen Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector . 2 Adjust the projection image to the screen. Check that the screen is set le vel and v er tically . Adjustment of the Pr ojection Screen T urn the zoom ring to adjust the screen size [...]

E-25 Adjustment of the Projection Screen S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY STA TUS MENU QUICK MENU ( 2 ) ( 1 ) Note: When the projector has a rear installation is used, the orientation of the projection will need to be changed. Please see “ Vertical Flip / Horizontal Flip ” on Page E-47. Adjuster button Making Ad[...]

E-26 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the men u, see “Menu Operation Method” on P age E-34 and the various items on P ages E-41 to E-54. Input Selection VIDEO FREEZE MUTE ECO VOL KSTN ZOOM CANCEL QUICK MENU ENTER COMPUTER QUI[...]

E-27 General Operation Selection of Aspect Ratio This function selects horizontal and vertical picture proportions of the input signal. Press the ASPECT button while vie wing the projected image and select the aspect ratio. P ersonal Computer Signal Each press of the ASPECT button adv ances the selection one step in the se- quence of Auto → Direc[...]

E-28 Fr eezing a Moving Picture This function is used to stop and view a mo ving picture. Note that the input image continues to adv ance even though the picture there is a still picture condition. A press of the FREEZE button c hanges the screen to a still picture . A further press returns the screen to a moving picture. General Operation FREEZE M[...]

E-29 Keystone Manual Adjustment Use this to adjust f or trapezoidal (keystone) distor tion of the pro- jected image. The projector has both an automatic and a manual ke y- stone adjustment function. The manual adjustment will be described here. Adjustment Method (1) Press the (  ) b uttons of the projector , or the (  ) KSTN b ut- tons [...]

E-30 General Operation Enlargement of the Image and V ideo Movement Note: * Zoom and image movement functions are cancelled when the input is switched. * The greater the zoom enlargement, the less distinct the image will appear . The reason for this is that the dots are being digi tally corrected so that they are not conspicuous. * Movement of the [...]

E-31 General Operation Pr otecting the Projector with the Security Lock A passw ord can be registered and the security lock set in or der to protect the pr ojector from unauthorized use . Registering the passw ord The pass word is registered using the menus. For instructions on operating the menus , see “ Menu Oper ation Method ” on E-34. (1) S[...]

E-32 General Operation If the passw ord input display appear s when the power is turned on When a pass word has been registered, the “ P assword ” input window appears on the projected image when the power is turned on. The projector continues projecting this image until the correct pass word is input. At this time, only the PO WER/ST ANDBY but[...]

E-33 General Operation Using the Quick Menu This function permits frequently used adjustments to be per formed quickly . Note that the Quick Menu will not be displa yed unless the signal of the con- nected equipment is input. Please select the input that you wish to adjust. Main unit operation (1) Press the Q UICK MENU button to display the quic k [...]

E-34 Menu Operation Method • This section describes only the menu operation method. Please see this item should you need inf ormation while performing menu operations. • For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip- tions. • Adjustments and settings are made by pr ojecting [...]

E-35 Menu Operation Method Menu Screen Names and Functions Menu Name This is the title of the menu. There is a change to the title screen when the menu is selected. The cursor mov es to the selected menu name. Cursor (Deep Blue) This permits setting/adjustment of the item located at the cursor position. Item Name This is the name of the adjustment [...]

E-36 Menu Operation Method Performing Menu Operations • Only “Setup”, “Options” and “Info. ” can be selected when no signal is being input. • The menu display will c lose if, after pressing a b utton, the ne xt button operation is not made within 30 seconds. • The adjustment and the setting values are stored even when the po wer i[...]

E-37 3 Press the SELECT  button to display the item name selection cursor . Displaying the Cursor This condition al- lows selection of the item name. VIDEO FREEZE MUTE ECO VOL KSTN ZOOM CANCEL QUICK MENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY Menu Operation Method 4 Press the SELECT (  ) button to align the cursor with t[...]

E-38 Menu Operation Method 6 Press the MENU button and close the menu display Closing the Menu VIDEO FREEZE MUTE ECO VOL KSTN ZOOM CANCEL QUICK MENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY Selecting Another Menu Name with Remote Contr ol Operation When a sub menu is displa yed, press the CANCEL but- ton or the MENU button to close[...]

E-39 List of Item Names Of fering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal. * “ Tint ” can be adjusted only in the NTSC system composite/S signal input mode, or in the component signal input mode. Menu Operation Method [Example of Menu Displa y Items at the Time o[...]

E-40 Menu name Setup Info. Auto Source E-48 嘷嘷 Item Name Reference Page Sub Menu Item Name Auto Power Off E-48 嘷嘷 嘷嘷 Menu Position E-48 Input Format 嘷嘷 嘷嘷 Video S-Video E-49 Presentation Timer E-49 E-50 嘷嘷 Language On Screen Background Startup Screen Option E-51 嘷嘷 E-51 嘷嘷 E-51 嘷嘷 E-52 嘷嘷 Security Lock E-52 ?[...]

E-41 Image • Perf orm this operation while projecting the picture for which the adjustment/setting will be made. • Select the menu name “Image”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offer[...]

E-42 Fine Picture Adjust this when the picture shows a lac k of color fidelity or flickering. Select the “ Fine Picture ” item name and adjust with the SELECT (  ) b ut- tons so that the lack of color fidelity or the flic kering disappears. Image H Position Adjust this when the picture is shifted to the left or right. Select the “ H P o[...]

E-43 Color • Do the following operation while displa ying the image you want to adjust or set. • Select the menu name “Color”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selectio[...]

E-44 Color Color T emp. The screen color is affected b y the color of the illumination and other extraneous light. This function adjusts the white, which is the reference color for video equipment, and improves the quality of color repr oduction. Adjustment can also be used to enhance skin colors. Select the item name “ Color T emp . ” and sele[...]

E-45 White Balance Color This function automatically adjusts the b lack level and the white level of the Computer input signal to suit the personal computer . 1 Select the item name [White Balance] and press the ENTER button. The display will change to [Input Blac k Signal]. 2 The screen backgr ound color of the connected personal computer will be [...]

E-46 V iew • Perf orm this operation while projecting the picture for which the adjustment/setting will be made. • Select the menu name “View”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offeri[...]

E-47 V ertical Flip / Horizontal Flip In selecting the method of pr ojecting to the screen, these functions are set when the pr ojector is in a rear screen installation. Select the item name “ V er tical Flip ” or “ Horizontal Flip ” and select the setting contents with the SELECT (  ) buttons . View “V ertical Flip” Off “Horizo[...]

E-48 Setup • Select menu name “Setup”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on Page E-39. The A uto Source function automatically detec[...]

E-49 Setup Eco Mode Use this if the picture is projected on a small screen and the picture is too bright or when projecting ima ges in dark rooms. Select the item name “ Eco Mode ” and select the setting contents with the SELECT (  ) buttons . On ............... The lamp ’ s brightness is reduced to approximately 80%, extending the lamp[...]

E-50 Setup Pr esentation Timer The presentation is given while chec king the timer displayed on the screen. The gauge display allo ws the remaining time to be known at a glance. Select the item name “ Presentation Timer ” and select the setting contents with the SELECT (  ) buttons . Setting contents: Off, 10 min. , 20 min. , 30 min. , 40[...]

E-51 Option • Select menu name “Option”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on Page E-39. Language This function sets the language th[...]

E-52 Startup Screen Option This is the selection of whether or not to displa y the logo screen at startup time . Select item name “ Star tup Screen ” and select the setting contents with the SELECT (  ) buttons . Logo ........... Displays the logo. Blank .......... Does not display the logo. Note: When “ Logo ” is selected at the star[...]

E-53 Info. • Select menu name “Info. ”. See “ Menu Operation Method ” on Page E-34 f or information about perf or ming menu operations. The item name display will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on Page E-39. Status This displa ys information about the [...]

E-54 Resolution / Frequency Info. This function displays the resolution and frequency of the detected in- put signal. Lamp Timer This displays the lamp timer . This projector has an Eco mode function. The lamp lif e will differ between Normal mode and Eco mode. Lamp Life Use only in Normal mode: appro x. 2000 hours Use only in Eco mode: approx. 300[...]

E-55 When an Indicator is Lit or Flashing S O U R C E K E Y S T O A U T K E Y S T O N E POWER UIC K MENU STANDBY STATU S MENU The indicators on the pr ojector’ s control panel light or flash to notify of pr oblems, as described below . An indicator is also used to notify y ou of the currently set power mode. See “P ower Cable Connections and Sw[...]

E-56 T roubleshooting Check the following matters before r equesting servicing. • Is the power cord plugged into a po wer outlet? • Is the lamp cov er proper ly mounted? • Is the projector ’ s temperature high? T o protect the projector, the po wer can- not be tur ned on when the projector ’ s temperature is abnormally high. • Has the l[...]

E-57 Cleaning • Be cer tain to disconnect the power plug from the po wer outlet before cleaning. • Do not spra y or otherwise expose the projector , lens, or screen to volatile substances such as insecticides. Do not leav e r ubber or vinyl products in contact with the projector f or long periods. Doing so could cause them to undergo qualitativ[...]

E-58 Replacing the Lamp Cartridge • The lamp that is used as a light source in the pr ojector has a limited ser vice life. The rated service life of the lamp is about 2000 hours (when used in normal mode onl y). This could be shor tened depending on conditions of use and other factors. Note that lamp life will be e xtended when the projector is o[...]

E-59 Replacing the Lamp Cartridge Preparations: T urning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched mak es it easier to replace the lamp car tridge. T urn the projector r ight-side up after replacing the lamp cartr idge. 1 Unplug the power cor d. 2 T urn the projector upside-down. 3 Remove the lamp co [...]

E-60 Replacing the Lamp Cartridge 5 Mount the new lamp cartridge . (1) Slowly push in the lamp car tridge. (Align it with the screw holes of the main unit.) 6 Mount the lamp cover . (1) Inser t the edge of the lamp cover into the main unit, then close the lamp cov er. 7 Reset the Lamp Timer . Connect the power cable , switch on the pow er , and the[...]

E-61 Specifications Model KG-PS100S Optical Method of projection : DLP ® (single DLP ® chip) DLP ® chip 0.55 inches 800 ⳯ 600 dots Lamp 230 W high pressure mercur y lamp Projection lens : Man ual zoom ( ⳯ 1.15), Manual f ocus F = 2.45 – 2.62, f = 18.7 – 21.5 mm Image size Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 f eet te[...]

E-62 Specifications Model KG-PS120X Optical Method of projection : DLP ® (single DLP ® chip) DLP ® chip 0.55 inches 1024 ⳯ 768 dots Lamp 230 W high pressure mercur y lamp Projection lens : Man ual zoom ( ⳯ 1.15), Manual f ocus F = 2.45 – 2.62, f = 18.7 – 21.5 mm Image size Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 f eet t[...]

E-63 Specifications Model KG-PS125X Optical Method of projection : DLP ® (single DLP ® chip) DLP ® chip 0.55 inches 1024 ⳯ 768 dots Lamp 230 W high pressure mercur y lamp Projection lens : Man ual zoom ( ⳯ 1.15), Manual f ocus F = 2.45 – 2.62, f = 18.7 – 21.5 mm Image size Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 f eet t[...]

E-64 T able of Supported Fr equency The projector automatically identifies the signal input from the computer and selects the optimum resolution as sho wn on the ta ble below . Manual adjustments ma y be required for some input signals . See “ Picture Adj. / Fine Picture / H Position / V P osition ” on page E-41, 42. VIDEO(NTSC) VIDEO(P AL/SECA[...]

E-65 Cabinet Dimensions S O U R C E K E Y S T O N E A U T O K E Y S T O N E POWER STANDBY ST ATUS MENU QUICK MENU Unit: mm (inch) 195 (7.7) 58 (2.3) 262 (10.3)[...]

2007, KAGA COMPONENTS CO., LTD.[...]