RAD Data comm Vmux-2100 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 118 pages
- 2.52 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Network Router
RAD Data comm MBE10-8D
58 pages 1.98 mb -
Network Card
RAD Data comm IPmux-1
143 pages 3.95 mb -
Network Card
RAD Data comm ARC-101
46 pages 0.75 mb -
Network Router
RAD Data comm BR-ASI01
39 pages 0.11 mb -
Network Router
RAD Data comm MBE10-1D
58 pages 1.98 mb -
Modem
RAD Data comm ASMI-450
117 pages 0.6 mb -
Network Router
RAD Data comm 100
9 pages 0.46 mb -
Network Card
RAD Data comm RIC-155
90 pages 2.87 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation RAD Data comm Vmux-2100. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel RAD Data comm Vmux-2100 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation RAD Data comm Vmux-2100 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation RAD Data comm Vmux-2100 devrait contenir:
- informations sur les caractéristiques techniques du dispositif RAD Data comm Vmux-2100
- nom du fabricant et année de fabrication RAD Data comm Vmux-2100
- instructions d'utilisation, de réglage et d’entretien de l'équipement RAD Data comm Vmux-2100
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage RAD Data comm Vmux-2100 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles RAD Data comm Vmux-2100 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service RAD Data comm en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées RAD Data comm Vmux-2100, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif RAD Data comm Vmux-2100, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation RAD Data comm Vmux-2100. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Vmux-2100 Installation and Operation Manual Voice Trunking Gateway[...]
-
Page 2
[...]
-
Page 3
Vmux-2100 Voice Trunking Gateway Installation and Operation Manual Notice T h i s m a n u a l c o n t a i n s i n f o r m a t i o n t h a t i s p r o p r i e t a r y t o R A D D a t a C o m m u n i c a t i o n s L t d . ( " R A D " ) . N o part of this publication may be reproduced in any form whatsoever without prior written approval by [...]
-
Page 4
Limited Warranty RAD w arr ant s to D IST RIB UTOR that the hard war e in the Vmux-2100 to be deli ver ed he reu nde r sha ll be free of defects i n material and workmanship unde r normal use and service for a period of twelve (12) months following the date of shipment to DISTRIBUTOR. If, during the warranty period, any component part of the equipm[...]
-
Page 5
General Safety Instructions The following in structions ser ve as a general guid e for the safe installation and operation of telecommunications products. Addition al i nstructions, if appl icable, are included ins ide the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding [...]
-
Page 6
Handling Energized Products General Safety Practices Do not touch or tamper with the power supply when the power cord is connected. Line voltages may be present inside certain products even when the powe r switch (if installed) is in the OFF position or a fuse is blown. For DC-powered products, although the vo ltages levels are usually not hazardou[...]
-
Page 7
Connection of Data and Telecommunications Cables Data and telecommunicatio n interfaces ar e classified accor ding to their safety status. The following table list s the status of several standard in terfaces. If the st atus of a given port differs from the standard one, a no tice will be given i n the manual. Ports Safety Status V.11, V.28, V.35, [...]
-
Page 8
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cords. Pour réduire les risques s’incendie, utiliser seulement des conducteurs de télécommunications 26 AWG ou de section supérieure. Some ports are suitable for connection to intra-buildin g or non-exposed wiring or cabling only. In such cases, a notice will be [...]
-
Page 9
FCC-15 User Information This equipment has been tested and found to comply with the limits of the Class A digital device, pursuant to Part 15 of the FCC rules. These limi ts are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can ra[...]
-
Page 10
Declaration of Conformity Manufacturer’s Name: RAD Data Communications Ltd. Manufacturer’s Address: 24 Raoul Wallenberg St. Tel Aviv 69719 Israel Declares that the prod uct: Product Name: VMUX-2100 Conforms to the following standard(s ) or other normative document(s): EMC: EN 55022:1994 Limits and methods of measurement of radio disturbance cha[...]
-
Page 11
Vmux-2100 Installation and Operation Manual i Contents Chapter 1. Introduction 1.1 Overview .......................................................................................................... 1-1 Versio ns ................................................................................................................... 1-1 Voice Module ....[...]
-
Page 12
Table of Contents ii Vmux-2100 Installation and Operation Manual Turning Off Vmux-2100........................................................................................... 3- 2 3.3 Default Settings ................................................................................................. 3-3 Chapter 4. Manage ment from a Termina l 4.1 [...]
-
Page 13
Table of Contents Vmux-2100 Installation and Operation Manual iii Configuring Voice Card Parameters .......................................................................... 5-3 Transferring Database to the Remote Vmux-2100 ..................................................... 5-5 Completing Remote Vmux -2100 Configuration ........................[...]
-
Page 14
Table of Contents iv Vmux-2100 Installation and Operation Manual List of Figures 1-1. Transmitting Comp ressed Voic e and Signaling over IP Network ................................. 1-2 1-2. Transmitting 480/384 Voice Channels ov er a Single E1/T1 Link (16:1 Compression) .. 1-2 1-3. Transmitting Compr essed Voice in Point-to-M ultipoint Application[...]
-
Page 15
Table of Contents Vmux-2100 Installation and Operation Manual v 4-33. Edit Bundle Men u ................................................................................................. 4-26 4-34. Connectivity Parameters Menu .............................................................................. 4-27 4-35. Voice Parameters Menu ............[...]
-
Page 16
Table of Contents vi Vmux-2100 Installation and Operation Manual List of Tables 1-1. Ethernet Frame Fiel ds ................................................................................................ 1-8 1-2. UDP Source Port as Destinat ion Voice Port ............................................................... 1-9 2-1. E1 Main Link Jumper [...]
-
Page 17
Overview 1-1 Chapter 1 Introduction 1.1 Overview Vmux-2100 is a modular voice trun king gate way that enables up to 16 E1 or T1 circuits to be extended over a single E1, T1 or IP link. Vmux-2100 implements G.723.1, G.729 A, G.711 compression and TDMoIP mult iplexing algorithms to send up to 480/384 voice channels ov er a single E1/T1 or IP link wit[...]
-
Page 18
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-2 Overview Applications Figure 1-1 sh ows a Vmux-2100 application, where the gateway transmits compres sed voice over a n IP netw ork, includ ing transparent tran smissio n of CCS and CAS signaling. ISDN, SS 7 PBX ISDN, SS 7 PBX PBX PBX Vm ux -21 00 Vmux -2100 Vm ux -21 00 Vmux -2[...]
-
Page 19
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Overview 1-3 Features E1 Main Link Balanced redundant E1 main links port s use HDB3 coding and c omply with G.703, G.704, G.706, G. 732 and G.823 standards. The E1 fra mers support pass-through, G.732S an d G.732N framing with or without CRC-4. Integral LTU/DSU can be enabled for li[...]
-
Page 20
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-4 Overview Bundling Bundle is a logical internal port of Vmux- 2100, containing up to 60 timeslots. Each E1/T1 group handles up to five bundles. A bundle is route d to a defined remo te IP address (remote group address). Each time slot can be included in any bund le belonging to i[...]
-
Page 21
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Physical Description 1-5 Vmux-2100 supports a four-level secu rity and user-authenticatio n system: • Administrator – Allowed to configure all the parameters of Vmux-2100. • Operator – Allowed to perform all operations in the system except for user administration (a dding/de[...]
-
Page 22
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-6 Functional Description 1.3 Functional Description Figure 1-5 illustrates the block diagra m of Vmux-2100. Et herne t Swit ch 10/ 100Bas eT M ain Li nk E1 /T1 Ma i n Li nk Contr ol Por t Host Main M o dule E1/T1 E1/T1 E1/T1 E1/T1 E1/T1 E1/T1 E1/T1 E1/T1 Grou p 1 Grou p 1 Grou p 1[...]
-
Page 23
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Functional Description 1-7 In addition to the translation of individu al bits, the signaling profiles can also be used to define the signaling bit patterns that indicate the idle and OOS states. • CCS – The signaling information is transferred transparently to the host, wh ich e[...]
-
Page 24
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-8 Functional Description Ethernet Frame At a later stage, the TDMoIP frame becomes a part of the standard Ethernet frame, which also includes a UDP header, IP he ader and MAC. The Ethernet frames are forwarded to the Ethernet switch, wh ich sends them to one of t he main links: 10[...]
-
Page 25
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Functional Description 1-9 VLAN Support Vmux-2100 supports VLA N, according to IEEE 802.1p&q. When VLAN support is enabled Vmux-2100 ad ds four bytes t o th e MAC layer of the Ethernet frame. The content of these bytes, MAC layer priority and VL AN ID, can be set by the user. In[...]
-
Page 26
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-10 Functional Description Bandwidth Utilization By using TDMoIP multipl exing and the voice activity detection, Vmux-2100 supports a higher number of voice channe ls over TDM than it is poss ible by utilizin g conventio nal compres sion meth ods alone. TDMoIP multi plexing and gro[...]
-
Page 27
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Technical Specifications 1-11 1.4 Technical Specifications Ethernet Main Link Standards IEEE 802.3, 802.3u , Ethernet 802.1p/q Data Rate 10 or 100 Mbps, half duplex or full duplex, autonegotiation support Statistics According to RFC 1643 or RFC 2665: • Received frames – Correct [...]
-
Page 28
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-12 Technical Specifications T1 Main Link Number of Links Two (one re dundant) Data Rate 1.544 Mbps Standards ANSI T1.403, AT&T TR-62411, ITU-T Rec. G.703 Line Code AMI Zero Suppression B8ZS Framing SF, ESF, transparent Timing Internal or loopback Statistics Full statistical di[...]
-
Page 29
Vmux-2100 Installation and Operation Manual Chapter 1 Introduction Technical Specifications 1-13 Line Code AMI Zero Suppression B8ZS Framing D4, ESF Receive Signal Level 0 to -36 dB with CSU 0 to -30 dB without CSU Transmit Signal Level 0, -7.5, -15, or -22.5 dB with CSU ± 2.7V ( ± 10%) at 0–655 ft without CSU Jitter Performance Per AT&T TR[...]
-
Page 30
Chapter 1 Introduction Vmux-2100 Installation and Operation Manual 1-14 Technical Specifications Indicators Ethernet Main Link ACT (yellow), blinks according to the Ethernet traffic LINK (green), ON – Good link integrity E1 Main Link and Voice Port LOC (red), ON – Local sync loss occurred REM (red), ON – Remote sync loss occurred T1 Main Link[...]
-
Page 31
Site Requirements and Prerequisites 2-1 Chapter 2 Installation and Setup This chapter describes installation an d setup procedures for the Vmux-2100 device. After installing the unit: • Refer to Chapter 3 for the operating instructions. • Refer to Chapter 4 for the detailed system conf igura tion procedures using an ASCII terminal connected to [...]
-
Page 32
Chapter 2 Installation and Setup Vmux-2100 Installation and Operation Manual 2-2 Installation and Setup 2.2 Package Contents The Vmux-2100 package includes the following items: • One Vmux-2100 unit • Vmux-2100 installation and operation manual • CBL-RJ45/2BNC, RJ-45 to BNC inte r face adapter (if ordered) • CBL-VMUX-MM-MODE M cross cable (i[...]
-
Page 33
Vmux-2100 Installation and Operation Manual Chapter 2 Installation and Setup AM Installation and Setup 2-3 JP1 6 JP1 4 JP11 JP1 3 JP8 JP1 2 JP5 JP7 FGND 3 , 6 FGND 3 , 6 NO NO YES JP10 JP1 JP9 UNBA L UNBA L UNBA L UNBA L UNBA L UNBA L UNB UNB JP6 BAL BAL BAL BAL BAL BAL BAL BAL YES Figure 2-1. E1 Main Link J umper Locations Table 2-1. E1 Main Link [...]
-
Page 34
Chapter 2 Installation and Setup Vmux-2100 Installation and Operation Manual 2-4 Installation and Setup Connecting the Main Link The Vmux-2100 Ethernet main link interface termi nates in an 8-pin R J-45 connector. Appendix A specifies the pinout of the Ethernet connector. The Ethernet main link port supports conne ction via straight and cross cable[...]
-
Page 35
Vmux-2100 Installation and Operation Manual Chapter 2 Installation and Setup AM Installation and Setup 2-5 Connecting the Power Vmux-2100 includes two hot-swappable AC or DC power supplies, supporting load sharing. To connect Vmux-2100 t o the power source, refer to the appropriate section below, depending on your ver sion of the unit (AC or D C). [...]
-
Page 36
Chapter 2 Installation and Setup Vmux-2100 Installation and Operation Manual 2-6 Installation and Setup[...]
-
Page 37
Front Panel Indicators 3-1 Chapter 3 Operation This chapter provides the following information for Vmux-2100: • Vmux-2100 front-panel indicators • Operating procedures (turn-on, fron t-panel indications, performance monitoring and turn-off). Installation procedures given in Chapte r 2 must be completed an d checked before attempting to operate [...]
-
Page 38
Chapter 3 Operation Vmux-2100 Installation and Operation Manual 3-2 Operating Vmux-2100 Table 3-1. Vmux-2100 L EDs (Cont.) Name Function Location LINK (green) ON – Good link integrity Ethernet main link connector ACT (yellow) Blinks according to the Ethernet traffic Ethernet main link connector LOC (red) ON – Local sync loss occurred E1 main li[...]
-
Page 39
Vmux-2100 Installation and Operation Manual Chapter 3 Operation Default Settings 3-3 3.3 Default Settings Vmux-2100 is managed by an ASCII te rminal or PC running a terminal emulat ion program via menu-driven embe dded software. Table 3-3 lists the default settings of the Vmux-2100 configurat ion parameters. Table 3-3. Vmux-210 0 Default Settings P[...]
-
Page 40
Chapter 3 Operation Vmux-2100 Installation and Operation Manual 3-4 Default Settings Table 3-3. Vmux-2100 D efault Settings (Cont.) Parameter Default Value Main Link (T1 Parameters) Connect No Clock Source Lbt Frame Esf Interface Type Dsu Line Code B8ZS Rx Sensitivity (CSU mode only) LOW (-30 dB) Tx Gain Level (CSU mode only) 0 dBm Line Length (DSU[...]
-
Page 41
Vmux-2100 Installation and Operation Manual Chapter 3 Operation Default Settings 3-5 Table 3-3. Vmux-2100 D efault Settings (Cont.) Parameter Default Value External E1 Connect No Frame 732S Restoration Time 1 second Clock Source Lbt Interface Type Ltu Idle Code ff Signaling CAS Profile 1 External T1 Connect No Clock Source Lbt Frame Esf Interface T[...]
-
Page 42
Chapter 3 Operation Vmux-2100 Installation and Operation Manual 3-6 Default Settings[...]
-
Page 43
Preparing for the Control Session 4-1 Chapter 4 Management from a Terminal The configuration of Vmux-2100 is per formed via menu-dr iven embedded software, using a standard ASCII terminal or a PC running a terminal emulat ion application connected to the rear panel CONTROL port. Alternatively, you can configure Vmux-2100 vi a Telnet connectio n, wh[...]
-
Page 44
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-2 Preparing for t he Control Session Initiating a Control Session Vmux-2100 supports two de fault terminal rates: • 115.2 kbps, for 2 0–30 seconds after the power-u p, until the boot sequence is completed. Supervisory terminal connectio n may be required at this [...]
-
Page 45
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Navigat ing the Management Menus 4-3 4.2 Navigating the Management Menus This section provides a ge neral description of the software men u operation and conventions for navigating the menus. Appendix C lists all menu s of the Vmux-2100 management soft ware. Selecting [...]
-
Page 46
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-4 Starting the Control Session 4.3 Starting the Control Session Once you have installed Vmux-210 0, and completed the installa tion and operation procedures described in Chapter 2 and Chapter 3 , you can start the control session. You have to enter a user name and pa[...]
-
Page 47
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-5 4.4 Displaying the Vmux-2100 Inventory Vmux-2100 inventory displays information on the types of the voice modules detected in the unit, together with their hardware and software versions. To display the Vmux-2100 inventory : •[...]
-
Page 48
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-6 Configuring the Vmux-2100 System Configuration 1. System 2. Hub 3. Card @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-4. Configuration Men u 2. From the Configuration menu, choose System . The System menu appears (see Fi gure 4-5 ). Sys[...]
-
Page 49
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-7 Management 1. Host IP 2. Manager List 3. Host Mux Name ... 4. User Administration 5. Signaling Configuration 6. Telnet (Enable) @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-6. Managemen t Menu 2. From t[...]
-
Page 50
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-8 Configuring the Vmux-2100 System Defining the Manager List You can define the network ma nagement stations to which the SNMP agent of Vmux-2100 will send traps. Up to ten managers can be defined. To define the manager li st: 1. From the Management menu, choose [...]
-
Page 51
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-9 User Administration 1. Add New User 2. Delete User 3. Change User Details 4. Show All Users > @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-9. User Administration Menu 2. From the User Administration [...]
-
Page 52
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-10 Configuring the Vmux-2100 System Deleting an Existing Us er from the Database To delete an existing user: 1. From the User Administration menu, choose Delete User . The Delete User menu appears (see Figure 4- 11 ). Delete User 1. Enter UserName (to delete) ...[...]
-
Page 53
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-11 4. Choose Confirm and save password and then re-enter the new password to confirm the change. 5. To change the user access level, choose Change access level and then enter a new value (Monitor, Technician, Operator or Administrator[...]
-
Page 54
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-12 Configuring the Vmux-2100 System Configuring the Control Port Vmux-2100 allows you to config ure the baud rate, timeout period, and connection of a dial-in modem to the rear panel CONTROL port. Configuring the Data Rate The Vmux-2100 control data port supports bau[...]
-
Page 55
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-13 3. From the Dial-In Modem menu, choose: Disable to disable connection of a dial-in modem to the control port Enable to enable connection of a dial-in mo dem to the control port. If an ASCII terminal or PC is connected di re[...]
-
Page 56
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-14 Configuring the Vmux-2100 System Signaling Configuration 1. Signaling Profile Configuration 2. SS7 Keep-Alive Suppression Rate (0% - No Suppression / Not SS7) @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-15. Signaling Configuration Me[...]
-
Page 57
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring the Vmux-2100 System 4-15 6. In the signaling table, select a signaling bit that you want to configure by pressing <Tab> . 7. Configure the signaling bit by typing a number corresponding to the desired value (see Table 4-1 ), and pressing <Enter>[...]
-
Page 58
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-16 Configuring the Vmux-2100 System To configure the keep-alive suppression rate: 1. From the Signaling Configuration menu (see Figure 4-15 ), choose SS7 Keep-Alive Suppression Rate . The SS7 Keep-Alive Suppressi on Rate menu appear s (see Fi gure 4-18 ). SS7 Kee[...]
-
Page 59
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Entering Main Link and Voice Modules into the Database 4-17 Date & Time Update 1. Set Time (hh:mm)... (13:23) 2. Set Date (dd/mm/yyyy)... (4/2/2002) @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-19. Date & Time Update Menu 2. From t[...]
-
Page 60
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-18 Configuring Main Link and Voice E1/T1 Ports 3. From the Main Board menu, select one of the following module types: M-IP – 10/100BaseT port only M-IPE1 – 10/100BaseT port and E1 port M-IPT1 – 10/100BaseT port and T1 por t. 4. From the Hub menu, ch[...]
-
Page 61
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-19 Configure the timeslots of each E1/T1 port (voice or data, mapping to specific bundles, routing to remote ports an d timeslots). Configuring the Main Link The main link modu le of Vmux-2100 may i nclude 10/100BaseT p[...]
-
Page 62
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-20 Configuring Main Link and Voice E1/T1 Ports Lan Parameters 1. Set Auto Negotiation (Disable) 2. Set Capability > (100baseT Full Duplex) @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-23. Lan Parameters Menu 4. From the Lan Para meter[...]
-
Page 63
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-21 Main Link 1 or Main Link 2 1. Connect > (Yes) 2. Frame > (G.732S) 3. Restoration Time> (CCITT) 4. Clock Source> (Lbt (Local)) 5. Interface Type> (Ltu) 6. Idle Code [0 - ff]... (ff) @ - Db Update; # - Db Un[...]
-
Page 64
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-22 Configuring Main Link and Voice E1/T1 Ports Idle Code (code transmitt e d to fill unused timeslots in the E1 frames): 00 to ff . 4. From the E1 Parameters menu, choose Time Slot Table to assign the E1 main link to carry the user data (and idle code). The Time [...]
-
Page 65
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-23 Main Link 1 or Main Link 2 1. Connect > (Yes) 2. Clock Source> (Lbt (Local)) 3. Frame > (Esf) 4. Interface Type> (Csu)) 5. Line Code> (B8ZS) 6. Rx Sensitivity> (LOW (-30dB)) 7. Tx Gain Level> (0 dBm)[...]
-
Page 66
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-24 Configuring Main Link and Voice E1/T1 Ports 266–399 Fee t 399–533 Fee t 533–655 Feet . Next, the timeslots that are to carry user data are assigned by choosing Time Slot Table From the T1 Para meters menu (as described for the E1 links) Time Slot[...]
-
Page 67
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-25 Slot 1 1. Group 1 2. Group 2 @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-29. Slot Menu 2. From the Slot menu, select a group to configure. The Group menu appears (see Figure 4-30 ). Group 1[...]
-
Page 68
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-26 Configuring Main Link and Voice E1/T1 Ports Bundle Configuration 1. Add Bundle 2. Delete Bundle 3. Edit Bundle @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 4-32. Bundle Configuration Menu 3. From the Bundle Configuration men u, choose A[...]
-
Page 69
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-27 Function: TDMoIP Max Bytes In Multiplexed Frame (size of a multiplexed TDMoIP frame in bytes): 100 to 1461 bytes Destination IP (IP address of the destination group) Destination Bundle (number of [...]
-
Page 70
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-28 Configuring Main Link and Voice E1/T1 Ports When operating Vmux-2100 in a TDM networ k (for example, leased line), where delays are minimal, you can configure Vmux-2 100 to genera te the keep-alive packets more frequently to ensure the early notification of a main[...]
-
Page 71
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-29 If you intend to change the voice parame ters, it is recommended to disconnect a bundle before configuring it. The bundle must be disconnected at the local and remote sites. If you do no t disconnect the bundle, you must[...]
-
Page 72
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-30 Configuring Main Link and Voice E1/T1 Ports 2. From the Card menu, select a slot to configure. The Slot menu appears (see Figur e 4-29 ). 3. From the Slot menu, select an E1/T1 group to configure. The Group menu appears (see Figure 4-30 ). 4. From the Group menu, [...]
-
Page 73
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal Configuring Main Link and Voice E1/T1 Ports 4-31 7. From the Time Slot Configuration me nu, configure the following parameters : Define timeslot(s) to configure by choo sing Update from Time Slot to select the first timeslot and then choosing To Time Slot to select[...]
-
Page 74
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual 4-32 Resetting Vmux-2100 4.8 Restoring Default Settings You can restore default settings of the ex ternal E1/T1 ports. Restoring the E1/T1 defaults erases the E1/T1 port identification in the database, us er’s configuration of the group IP addresses, defined bundles [...]
-
Page 75
Application Requirements 5-1 Chapter 5 Configuring Vmux-2100 for a Typical Application This chapter gives detailed instructions for co nfiguring Vmux-2100 for a typical application in which two Vm ux-2100 units operate point-to-point over a TDM network. 5.1 Application Requirements Figure 5-1 illustrates a typ ical TDM application, in which t wo Vm[...]
-
Page 76
Chapter 5 Configuring Vmux-2100 for a Typical Application Vmux-2100 Installation and Operation Manual 5-2 Configuring Vmux-2100 for Operation with CAS Signaling AM 5.2 Outline of Configuration Procedure The recommended configurat ion procedure of the loca l and remote Vmux-2100 units include the following steps: • Configuring of the IP host para [...]
-
Page 77
Vmux-2100 Installation and Operation Manual Chapter 5 Co nfiguring Vmux-2100 for a Typical Application AM Configuring Vmux-2100 for Operation with CAS Signaling 5-3 7. Display the Signal Profile Configuratio n menu, enter a desired signaling sys tem profile number (1) an d configure it according to the system used by the PBX connected to the V-4E1 [...]
-
Page 78
Chapter 5 Configuring Vmux-2100 for a Typical Application Vmux-2100 Installation and Operation Manual 5-4 Configuring Vmux-2100 for Operation with CAS Signaling AM 4. Display the E1 Parameters menu, and se t the E1 port of group 1 to the following values ( Main Menu > Confi guration > Card > Slot 1 > Group 1 > External 1 > E1 Para[...]
-
Page 79
Vmux-2100 Installation and Operation Manual Chapter 5 Co nfiguring Vmux-2100 for a Typical Application AM Configuring Vmux-2100 for Op eration with CCS Signaling 5-5 1 1 30 voice tim es lots rou ted to bund le 1, dest ination p ort 1 30 voice tim es lots rou ted to bund le 1, dest ination p ort 1 30 voice tim es lots rou ted to bund le 1, dest inat[...]
-
Page 80
Chapter 5 Configuring Vmux-2100 for a Typical Application Vmux-2100 Installation and Operation Manual 5-6 Configuring Vmux-2100 for Operation with CCS Signaling AM 5.4 Configuring Vmux-2100 for Operation with CCS Signaling Configuration of the Vmux-21 00 units operating with the CCS signaling is similar to the configuration for operation with th e [...]
-
Page 81
Tone Injection 6-1 Chapter 6 Diagnostics This chapter describes the Vmux-2100 di agno stic functions, which include: • Tone injection • Loopbacks (local and remote) • Ping utility. 6.1 Tone Injection The test tone is a data sequence at a rate of 1 kH z. This data sequence is identical to the data sequence that would have been generated if a 1[...]
-
Page 82
Chapter 6 Diagnostics Vmux-2100 Installation and Operation Manual 6-2 Tone Injection Diagnostics 1. Inject Tone Test 2. Local Loop Test 3. Remote Loop Test 4. Display Active test 5. Ping @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 6-2. Diagnostics Menu 2. From the Diagnostic menu, choose Inject Tone Test . The Inject To[...]
-
Page 83
Vmux-2100 Installation and Operation Manual Chapter 6 Diagnostics Loopback Tests 6-3 6.2 Loopback Tests Vmux-2100 supports activation of the loca l and remote loopbacks. The purpose of these tests is to determine the source of a break in the data flow. The loopbacks are activated per E1/T1 port. Local Loopback Vmux-2100 can activate a local loopbac[...]
-
Page 84
Chapter 6 Diagnostics Vmux-2100 Installation and Operation Manual 6-4 Pinging Remote Devices Remote Loopback Vmux-2100 can activate a remote loopback to test internal connection between the E1/T1 voice port and the main link. In th is mode, data comin g from the network (E1/T1 or IP) is looped back to the network (to the remote side). See Figure 6-[...]
-
Page 85
Vmux-2100 Installation and Operation Manual Chapter 6 Diagnostics Displaying the Active Tests 6-5 Ping 1. Ip Address ... (0.0.0.0) 2. Number Of Pings [1 - 16]... (1) 3. Activate @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 6-7. Ping Menu 2. F rom the Pi ng menu, choo se Ip Address , and enter the desired host IP address.[...]
-
Page 86
Chapter 6 Diagnostics Vmux-2100 Installation and Operation Manual 6-6 Displaying the Active Tests[...]
-
Page 87
Alarms 7-1 Chapter 7 Monitoring and Statistics Collection This chapter describes the alarms, sani t y checks (configuration errors and warnings), main link and voice modul e statistics supported by Vmux-2100. 7.1 Alarms Vmux-2100 detects fault condit ions and in itiates alarms and events to alert the user: • Alarms (major and minor ) have two sta[...]
-
Page 88
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-2 Alarms Status 1. Display 2. Clear 3. Display Sanity @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 7-1. S tatus Menu 3. From the Status menu, choose Display . The Display menu appears (see Figure 7-2 ). Display 1. Display All Ala[...]
-
Page 89
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Alarms 7-3 Working with Permanent Buffer The permanent buffer is represen ted by the Alarm Status screen. To access the Alarm St atus screen: • From the Display menu (see Figure 7-2 ), choose Display Alarm Status . Vmux-2100 di splays the pe rmanent ala[...]
-
Page 90
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-4 Alarms Table 7-1. Vmux-210 0 Alarms (Cont.) ID Code Terminal Message Description Severity 43 POWER SUP PLY NO. 2 WAS REMOVED Power supply 2 has been removed from its slot Major 44 FAN No.1 FAILURE Fan 1 failure has been detected Major 45 FAN No.2 FAILURE [...]
-
Page 91
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Sanity Checks 7-5 7.2 Sanity Checks Configuration errors and mismatches are rendered by the Vmux-2100 management software as sanity checks. Their main purpose is to maintain the database validity. Vm ux-2100 supports tw o types of the sanity check messages: ?[...]
-
Page 92
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-6 Sanity Checks Sanity Error and Warning List Table 7-2 lists in alphabetical order all sanity errors and warnings generated by Vmux-2100. Table 7-2. Sanity Errors and Warnings Display Type Description BUNDLE IS NOT CONNECTED Warning A timeslot is assigned [...]
-
Page 93
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-7 Table 7-2. Sanity Er ro rs and Warnin gs (Cont.) Display Type Description ILLEGAL DESTINATION IP ADDRESS Error Destination IP address for a bundle is not defined ILLEGAL SOURCE IP ADR ESS Error A group IP a ddress is illegal or not d[...]
-
Page 94
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-8 Collecting Statistics Main Module Statistics 1. Cpu Utilization 2. Ethernet statistics 3. Hdlc statistics* @ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit Figure 7-7. Main Module Statistics Menu 4. From the Main Module Statistics men u, [...]
-
Page 95
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-9 Table 7-3. Main Link Ethernet Statistics Values (Co nt.) Field Description Tx Bytes Number of data octets of good packets transmitted Tx Brdcst Frames Number of g ood broadcast packets transmitted Tx Multcst Frames Number of g ood mu[...]
-
Page 96
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-10 Collecting Statistics To clear the main port Ethernet statistics: • From the Ethernet Statistics menu, choose Clear to reset the Ethernet performance registers. Collecting the Main Li nk HDLC Statistics If the Vmux-210 0 unit is equi pped with an E[...]
-
Page 97
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-11 Table 7-4. Main Link HDLC Statistics Values Field Description Rx Total Frames Total number of HDLC packets received Rx Total Bytes Total number of data octets of all packets received Rx BSY Error Number of received HDLC packets disc[...]
-
Page 98
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-12 Collecting Statistics Calculating the Main Card CPU Utilization When calculating the CPU utilization, Vm ux-2100 display s th e following values: • Current CPU utilization • Maximum utilizat ion of the CPU resource s ever registered by the management[...]
-
Page 99
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-13 Displaying E1/T1 Group Ethernet Statistics Each E1/T1 group and main link card o f Vmux-2100 is connected to an internal Ethernet bus used for the data transm ission between the modules. Vmux- 2100 evaluates the Ethernet traffic tak[...]
-
Page 100
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-14 Collecting Statistics Ethernet Statistics of Slot 2, Group 1 Rx statistics Total Frames :[ 919545] Total Bytes :[ 96236506] 60 sec Frames :[ 837] 60 sec Bytes :[ 139349] LG Error :[ 0] NO Error :[ 0] SH Error :[ 0] OV Error :[ 0] Nlb Error :[ 0] CR Error[...]
-
Page 101
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-15 Table 7-5. E1/T1 Gr oup Ethernet Statistics Values Field Description Rx Total Frames Total number of packets received Rx Total Bytes Total number of data octets of all packets received Rx 60 sec Frames Number of packets received dur[...]
-
Page 102
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-16 Collecting Statistics 3. From the HDLC Statistics menu, choose Group Number> and then enter the desired group num ber from the displayed list to sel ect the group. 4. From the HDLC Statistics menu, choose Mode . The Mode menu appears (see Figure 7-13 [...]
-
Page 103
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-17 Displaying the E1/T1 Group Memory Statistics Vmux-2100 estimates the num ber of free memory blocks (2000 b ytes each) left in the E1/T1 group RAM (see Figur e 7-16 ): • Start Blocks – Number of free memory blocks after the start[...]
-
Page 104
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-18 Collecting Statistics To display the bundle st atistics: 1. From the Cards Statistics menu, choose Bundles statistics . 2. F rom the B undle Stat istics menu, ch oose Slot> and then enter the desired slot number from the displayed list to select t[...]
-
Page 105
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-19 Table 7-7. E1/T1 Gr oup Bundle Statistics Value s (Cont.) Field Description Tx Max Size Number of packets transmitt ed as a result of reaching the maximum frame size 60 sec Timeout N umber of packets transmitted as a result of reach[...]
-
Page 106
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-20 Collecting Statistics 5. From the Voice Statistics menu, choose Mode . The Mode menu appears (see Figure 7-13 ). 6. From the Mode menu, menu, choose Display to display the selected timeslot voice statistics (see Figure 7-18 ) or Clear to clear the statis[...]
-
Page 107
Vmux-2100 Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection Collecting Statistics 7-21 Displaying the Voice Signaling Statistics When operating with the CAS signal ing, Vmux-210 0 transmits signaling information in one of the timeslots. Yo u can display the mapping of the ABCD bits used by the each timeslot inside the[...]
-
Page 108
Chapter 7 Monitoring and Statistics Collection Vmux-2100 Installation and Operation Manual 7-22 Collecting Statistics Calculating the E1/T1 Group CPU Utilization Statistics When calculating the CPU utilization, Vm ux-2100 display s th e following values: • Current CPU utilization • Maximum utilizat ion of the CPU resource s ever registered by t[...]
-
Page 109
Ethernet Interface Connector A-1 Appendix A Interface Connector Specifications A.1 E1/T1 Ports Balanced E1/T1 Interface Connector The balanced E1/T1 interfaces of the ma in link and voice modules terminate in RJ-45 connectors. Figure A-1 illustrates location of the pins in t he E1/T1 balanced connector. Table A-1 lists the E1/T1 connector pin assig[...]
-
Page 110
Appendix A Interface Connector Specifications Vmux-2100 Installation and Operation Manual A-2 CBL-VMUX-MM-MODEM Cross Cable A.3 CONTROL Connector The control terminal interface terminates in a V. 24/RS-232 9-pin D-ty pe female DCE connector. Table A-3 lists the CO NTROL connector pin assignments. Table A-3. CONTROL Connector Pinout Pin Function Dir[...]
-
Page 111
Vmux-2100 Installation and Operation Manual Appendix A Interface Connector Specifications CBL-VMUX-MM-MODEM Cross Cable A-3 Table A-4. CBL-VMUX-MM-MODE M Cross Cable Wiring MODEM Connector Pin VMUX Connector Pin 2 3 3 2 1 7 7 1 4 6 9 4 5 5[...]
-
Page 112
Appendix A Interface Connector Specifications Vmux-2100 Installation and Operation Manual A-4 CBL-VMUX-MM-MODEM Cross Cable[...]
-
Page 113
Booting Vmux-2100 B-1 Appendix B Boot Manager and Software Downloading B.1 Introduction This chapter describes the Vmux-2100 boot so ftware and provi des instructions for software downloading via XMODEM or TFTP appl ications. The Vmux-2100 softw are is stored in the Flash memory in two sections: boo t and file system. The boot sector holds a boot p[...]
-
Page 114
Appendix B Boot Manager and Software Downloading Vmux-2100 Installation and Operation Manual B-2 Booting Vmux-2100 Accessing the File System The file system menu is an option that allows the user to perform basic file transfer operations. These operations are all optional. When working with the File System menu , configure the ASCII terminal rate t[...]
-
Page 115
Vmux-2100 Installation and Operation Manual Appendix B Boot Manager and Software Downloading Downloading the Application and Configuration Software B-3 B.3 Downloading the Application and Configuration Software New application software releases are dist ributed as *.img files, which are downloaded to Vmux-2 100 using the XMODEM pro tocol from the F[...]
-
Page 116
Appendix B Boot Manager and Software Downloading Vmux-2100 Installation and Operation Ma nual B-4 Downloading the Application and Configuration Software Downloading Application Files via TFTP The application software is download ed when Vmux-2100 has been already completed the boot-up procedure and th e management soft ware is running. To downl[...]
-
Page 117
C-1 Appendix C Configuration Menus This appendix lists all menus of the Vmux -2100 management software. 2. Conf igurati on Main me nu 1. Inventory 1. System 1. Man agement 1. Main Boa rd 1. Main Board 2. Slot 1 3. Slot 2 4. Slot 3 5. Slot 4 2. Slot 1 1. Host IP 1. LAN Parameters 1. Group 1 1. IP Address 2. Bun dl es P aram et ers 1. D ispl ay Bu nd[...]
-
Page 118
Appendix C Configuration Menus Vmux-2100 Installation and Operation Manual C-2 Ma in menu 3. M onit oring 4. Digno sti cs 1. Status 1. Inject T one T est 2. Local L oop T est 3. Remot e Loop T es t 4. 5. Di spl ay Act i ve T es t Pin g 2. Statistic s 1. Display 1. Cards Statistics 2. Main Modul e Statistics 1. D ispl ay All Alar ms 2. Displ ay and [...]