Radio Shack MX-500TM manuel d'utilisation

MX-500™ Oper a ting Manual Home Theater Master LCD Scr een Pr epr ogrammed and Lear ning Remote Contr ol R[...]

1 1. Introduction 2. Batteries A. Battery Installation B. Battery Life 3. Summary of Operations A. Description of Devices B. Preprogrammed Codes C. Learning From Other Remote Controls D. Macro Operations E. Favorite Channel Buttons F . Punch Through Operations G. Editing LCD T ext H. Cloning The MX-500 TM I. All Other Operations J. LCD Screen And B[...]

2 C. Erasing Macro Functions 1. Erase M1, M2, M3, POWER and SYSTEM OFF Buttons 2. Erase Macro Functions In The T en Device Buttons D. Erasing Punch Through Functions 9. LCD Button Editing A . T o Create or Edit T ext on Function and Device Buttons B. T o Create or Edit T ext for Favorite Channel Buttons 10. Recalling the Prepr ogrammed Three-Digit [...]

Congratulations! Y ou have purchased one of the most sophisticated remote controls on the market. The MX-500 TM has been designed to provide a new standard in remote control technology offering a very powerful and flexible preprogrammed and learning product. Setting up your MX-500 TM to operate your components is easy . Please follow the instructio[...]

1. Introduction There is also a list of Frequently Asked Questions (F AQ) for the MX-500 TM on the website that may prove to be helpful. V isit www .hometheatermaster .com for F AQs. For any questions or comments about the MX-500 TM , please visit our website, www .hometheatermaster .com or contact us at: Universal Remote Control, Inc. 500 Mamarone[...]

2. Batteries A. Battery Installation Before the remote control can be used, the batteries need to be installed. First, remove the battery cover on the back of the unit and install the four AAA batteries inside the battery compartment as shown. Make sure the batteries line up with the ( + ) and (-) markings. Improper installation could damage the re[...]

3. Summary of Operations A. Description of Devices The MX-500 TM is designed to operate up to ten components including Audio Receivers, Cable and Satellite Boxes, TV , DVD (LD), VCR, DVR, CD, T ape and AUX. However , each of the device buttons and corresponding functions can be changed to meet your individual requirements. Almost any device that us[...]

3. Summary of Operations C. Learning From Other Remote Contr ols The MX-500 TM can learn codes from your original remote controls. There are 26 LCD screens in the MX-500 TM . Each screen (page) has ten function buttons, including the ten device buttons on the main menu screen that can be taught. In addition, there are 31 buttons and a joystick (thu[...]

8 3. Summary of Operations SYSTEM OFF buttons can be made “system-wide” if they are programmed with macros. ( Note: Pr ogramming the POWER or SYSTEM OFF buttons with a macr o overrides the pr epr ogrammed or learned code on the button. ) See page 26 of this manual for further information. Each of these five buttons is designed to be able to sen[...]

9 MUTE) while all the other buttons control other equipment. Y ou can also set up the remote to operate channel control and transport functions (PLA Y , ST OP , REWIND, F AST FOR W ARD, SKIP-, SKIP+, P AUSE and RECORD buttons) from VCR, DVD, DVR, LD, CD or any other mode while all other buttons in the remote control are controlling other components[...]

10 3. Summary of Operations J. LCD Screen And Button Layout Displays the name of the device selected. System off (Power of f) Displays page number . Displays the device and function names. LIGHT button. MACRO buttons. MAIN DEVICE menu button. LCD Page change button. POWER MUTE VOLUME CHANNEL Previous channel button. TRANSPOR T functions(PLA Y , STO[...]

11 K. System Settings All programming is done by first entering the SETUP mode in the remote control. Press both the MAIN and ENTER buttons simultaneously for three seconds to enter the SETUP mode. SETUP will be shown at the top of the LCD screen. Y ou exit the SETUP mode by simply pressing the MAIN button. Important: When using the Preprogramming [...]

WHERE DO I ST AR T? First of all, get all of your original remote controls together . Find out what brands of components you have. Y ou may have one or more components that do not have original remote controls, but can still be controlled by the MX-500 TM . Y ou must use the preprogrammed method for those devices. For the rest, you can program the [...]

sound, you may want to start by setting up the DVD Device using the preprogrammed method described below , and then add functions from the other devices you will be using while watching your DVD video to the DVD device. For example, while playing a DVD, you will want to adjust the volume of your receiver . So, you would use the “Punch Through” [...]

14 1. Manually turn on the device you wish to operate. 2. Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds until SETUP appears at the top of the LCD screen. 3. Press the P-PRO button next to the LCD screen. 4. The remote will be flashing “SELECT BUTTON”. Press the button for the device you wish t[...]

4. Programming the MX-500 TM to Control Your Components first three-digit code number you selected for your device. There is no way of knowing which code is the one that will have the functions that more closely match your device than the others, so it is wise to try them all. See step #9 below . (Please enter the code number within 20 seconds of b[...]

4. Programming the MX-500 TM to Control Your Components 12. When you are finished programming your remote, exit from the preprogramming mode by pressing the MAIN button and then exit from the SETUP mode by pressing the MAIN button once again. Ti p : Y ou can change the pr eprogrammed code for each device at any time by following the steps above. Th[...]

17 4. Programming the MX-500 TM to Control Your Components 4. The remote will be flashing “SELECT BUTTON”. Press the device you wish to program. (For example, to program TV , press the TV button.) 5. The remote will be flashing “FROM T ABLE”. Select the device from which the scanned code will be selected. ( Important: If you have already re[...]

18 7. Confirm that it is the right code by pressing the Power button. After you have confirmed that the right code is entered, save the code by pressing the SA VE button on the LCD. 8. Confirm that you entered the right code number that matches your component by pressing other functional buttons. If any of the buttons do not operate, as they should[...]

19 4. Programming the MX-500 TM to Control Your Components B. Learning Method Y ou can program the MX-500 TM to operate a device by “teaching” the correct commands to device buttons on the main screen menu, the two sub-pages within each device button, 31 buttons and the joystick located in the middle of the remote control. The MX-500 TM learns [...]

20 remote’ s button until “Good” flashes twice on the LCD screen. ● T ry varying the distance between the remotes until you find an optimal distance where the codes are learned on the first or second try . 1. Programming The Function Buttons 1. Go to the SETUP mode by pressing both the MAIN and ENT buttons simultaneously for three seconds .[...]

4. Programming the MX-500 TM to Control Your Components 6. Press the button on the MX-500 TM you wish to program. Only the three MAIN, P AGE and F A V buttons cannot be programmed. 7. Press the button on your original remote control that you wish to program onto the MX-500 TM . Once the MX-500 TM has received the signal, the MX-500 TM will flash ?[...]

22 2. Programming The T en Device Buttons This will program ONE learned code onto the Device button, so that when you select that Device, it will send out the learned signal as it changes to that Device's function pages. 1. Go to the SETUP mode by pressing both the MAIN and ENT buttons simultaneously for three seconds . 2. Press the LEARN butt[...]

7. Once you complete the programming and wish to exit the Learning mode, press the MAIN button. Exit from the SETUP mode by pressing the MAIN button once again. Ti p : Only follow these instructions if you actually want a code sent when changing devices. Some users do not want a Device to send out a code when changing to that device. For example: Y[...]

5. Programming Favorite Channels Y ou can create and program up to 50 Favorite Channel buttons. Each favorite channel button can send out up to 10 commands with one button press. 1. Go to the SETUP mode by pressing both the MAIN and ENT buttons simultaneously for three seconds . 2. Press the F A V button next to the LCD screen. 3. Press the device [...]

25 5. Programming Favorite Channels Ti p : If you pr ess a wr ong channel number , move the cursor by using the left or right button of the joystick and then r eassign the corr ect channel number . 6. Return to Step #3 until you have programmed all of the F A V channel buttons that you require. 7. Once you have completed the programming and wish to[...]

26 6. Programming Macro Buttons A “macro” is a series of commands that you choose to be sent out with the push of one button. There are two types of macro functions you can program with the MX-500 TM : The M1, M2, M3, POWER and SYSTEM OFF buttons are designed to send out up to twenty commands from each of the five hard buttons. The ten device b[...]

27 3. Press one of the macro buttons, M1-M3, Power or System Off you wish to store your macro on. 4. Press the functional buttons you wish to store in the device macro button you selected, in the order you want them stored. Y ou can store up to 20 commands. Important: Do not press the MAIN button at the beginning of your macro, or it will not work.[...]

B. Programming Macr o Functions T o The T en Device Buttons 1. Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the MACRO button next to the LCD screen. 3. Important: Press the P AGE button. 4. Press one of the ten device buttons you wish to store your macro on. 5. Press the functional buttons [...]

29 6. Programming Macro Buttons Ti p : Remember that a single push of a Device Button that has a macr o connected to it will take you to that device's function pages. Y ou will need to hold the Device Button down for 1 second in or der to send out the macr o that you have cr eated for that Device Button. Ti p : Pr essing the P AUSE button (the[...]

In this case we are going to use the M1 button to turn on the TV , the receiver, the Cable box, choose the appropriate inputs, and tune in the channel where we normally watch the morning news. 1. Press MAIN and ENTER simultaneously for three seconds . 2. Press MACRO. 3. Press M1. 4. Press AUDIO. ( T akes you to the Audio device page. ) 5. Press POW[...]

31 6. Programming Macro Buttons 15. Press MAIN. 16. Press CABLE. ( Back to the this device to enter the appr opriate channel. ) 17. Press 1, then 3, then 5. ( Then pr ess the ENT button if your cable device r equir es it. ) 18. Press CH UP to save the macro. 19. Press MAIN twice. Press M1 to test your macro. It should turn on your Audio device (rec[...]

Y ou can use the audio receiver volume control in a different mode (for example, Audio receiver V olume Up and V olume Down and Mute in Satellite mode) using the volume punch through feature. Y ou can also have channel punch through (Channel Up, Channel Down) as well as eight VCR (or DVD) transport buttons (Play , Stop, Fast Forward and Rewind, Ski[...]

For example, for VOL you are punching through the controls of the Audio receiver's VOL to the TV or Cable box, enabling you to control the Audio receiver's VOL when in the TV or Cable box screen. 6. Punch Through is saved when the second device is pressed. 7. Repeat from Step #2 to program Punch Through for other devices. 8. Once you comp[...]

A. Erasing Learned Buttons 1. Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the ERASE button next to the LCD screen. 3. Press the LEARN button. 4. If you wish to erase all the learned functions in the MX-500 TM , press the ALL button and then press the SURE? button at the next LCD scree[...]

8. Press a single button if you wish to erase individual buttons one at a time. This will show all the functions in the device. Press the button you wish to erase. 9. Repeat from Step #5 to erase any other devices or learned buttons you require. 10. Press the MAIN button to exit to main Erase mode. Press the MAIN button once again to exit the SETUP[...]

7. Press the MAIN button to exit to main Erase mode. 8. Press the MAIN button once again to exit the SETUP mode. C. Erasing Macro Functions 1. Erase M1, M2, M3, POWER and SYSTEM OFF Buttons 1. Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the ERASE button next to the LCD screen. 3. Pres[...]

2. Erase Macro Functions In The T en Device Buttons 1. Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the ERASE button next to the LCD screen. 3. Press the MACRO button. 4. Press the KEY button. 5. Press one of the ten DEVICE buttons from which you wish to erase the macro function and then pr[...]

3. Press the VOL button on the LCD for V olume Punch Through, the PLA Y for T ransport Punch Through or the CH for Channel Punch Through depending upon which Punch Through you want to erase. 4. Press the DEVICE button from which you wish to erase punch through. 5. Press the same DEVICE button once again. 6. Punch through is erased when the same dev[...]

A. T o Create or Edit T ext on Function and Device Buttons 1. Enter the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the EDIT button next to the LCD screen. 3. Press the DEVICE button to display the function buttons for that device. 4. Press the function button on which you wish to write or edit text[...]

1. A B C 2. D E F 3. G H I 4. J K L 5. M N O 6. P Q R 7. S T U 8. V W X 9. Y Z Blank 0. + - <> etc 7. Save the text you completed by pressing the button you were writing on (the same function button you selected in step 3 or device button in step 4.) 8. Exit from Edit mode by pressing the MAIN button and then exit from the SETUP mode by press[...]

1. A B C 2. D E F 3. G H I 4. J K L 5. M N O 6. P Q R 7. S T U 8. V W X 9. Y Z Blank 0. + - <> etc 5. Save the text you completed by pressing the same function button you selected in step 4. 6. Exit from Edit mode by pressing the MAIN button and then exit from the SETUP mode by pressing the MAIN button once again. 1. Go to the SETUP mode by p[...]

The Backlight can be toggled On and Off just by pushing the LIGHT button on the top right side of the remote. It can also be set to go off at a predetermined time, as shown below . 1. Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the LIGHT button next to the LCD screen. 3. Using the number p[...]

1. Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds . 2. Press the CLONE button next to the LCD screen. 3. Press either the SEND or RECV button depending upon the role of the remote control. If the MX-500 TM is to be copied from, press the SEND button. If it is to be copied to, press the RECV button. 4. I[...]

7. Press the ST AR T button on both units to begin cloning. It will take about 40 seconds to complete the cloning and it will flash “ GOOD” upon completion of the cloning. 8. Exit from the Cloning mode by pressing the MAIN button and then exit from the SETUP mode by pressing the MAIN button once again. Pressing the MAIN button and Up on the joy[...]

Please note the LCD screen is breakable glass. Please exercise the following precautions when using the MX-500 TM : ● Do not tap the LCD screen to active devices. Use the rubber buttons beside the labels on the screen. ● Keep the LCD screen dry . W ipe off any spill immediately . The MX-500 TM is not waterproof. Never immerse it in water . ● [...]

The MX-500 TM has an internal memory lock system that retains all of the programs and learned functions for an extended period in the event of battery loss. Backlight: A feature that illuminates the LCD screen or keypad for use in low light or dark conditions. Battery type: The MX-500 TM uses 4 standard disposable alkaline AAA batteries, or the new[...]

Discrete codes: V ersions of toggle codes that only perform one function. Some examples would be "POWER ON" and "POWER OFF" or "VCR," "TUNER" and "DVD" receiver inputs. These types of signals are most often used to ensure your home theater components stay completely in sync for powering on and off a[...]

frequencies higher than the industry standard. Some examples would be Bang & Olufsen, Kenwood (455KHz) and older Pioneer Elite (1.125MHz). Such devices are never preprogrammed into off-the-shelf remote controls and can generally only be used with very specific learning remote controls. Infrared: "IR" A portion of the light spectrum be[...]

control: up, down, left, right and enter . The Joystick on the MX-500 TM can be programmed with other commands as well. The Joystick on the MX-500 TM is sometimes referred to as a Thumbpad. Keypad: Generally refers to all hard buttons on a remote control, or more specifically the numeric keypad (0 through 9). LCD screen: The display device built in[...]

50 17. Glossary Memory backup: The MX-500 TM can retain its programming information for an indefinite amount of time without batteries installed. Remotes that do not feature this may have their programming erased when changing batteries. Operating distance: The distance from which a remote control can still reliably operate devices. The average inf[...]

51 VCR, while the volume keys may be "punched through" to operate the audio receiver . Signals: See “ codes” or “ infrared.” Thumbpad: A feature on certain remote controls, the thumbpad is a single disc-shaped pointer which replicates five functions for menu control: up, down, left, right and enter . Also referred to as a “ joys[...]

The MX-500 TM is covered against any manufacturer's defects or workmanship for a period of one year from the date of purchase. The warranty does not cover the following items: ● Batteries or damage to the remote from faulty batteries. ● Damage from misuse, neglect, or acts of nature. ● Products that have been modified or incorporated int[...]

53 20. APPENDIX Button Name Functions AUDIO System-OFF POWER VOL UP VOL DN CH UP CH DN MUTE PRE-CH UP DN LEFT RIGHT SELECT PLAY STOP REW FF I<<, MENU >>I, GUIDE O, EXIT II, INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTER OFF ON/OFF VOL UP VOL DN PRESET+ PRESET - MUTE SCAN UP DN LEFT RIGHT SELECT REAR UP REAR DN CENTER DN CENTER UP MENU/Surr GUID[...]

54 20. APPENDIX Button Name Functions TV System-OFF POWER VOL UP VOL DN CH UP CH DN MUTE PRE-CH UP DN LEFT RIGHT SELECT PLAY STOP REW FF I<<, MENU >>I, GUIDE O, EXIT II, INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTER OFF ON/OFF VOL UP VOL DN CH UP CH DN MUTE PREV CH UP DN LEFT RIGHT SELECT MEMU GUIDE CANCEL INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTE[...]

55 20. APPENDIX Button Name Functions CABLE System-OFF POWER VOL UP VOL DN CH UP CH DN MUTE PRE-CH UP DN LEFT RIGHT SELECT PLAY STOP REW FF I<<, MENU >>I, GUIDE O, EXIT II, INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTER OFF ON/OFF VOL UP VOL DN CH UP CH DN MUTE PREV CH UP DN LEFT RIGHT SELECT PLAY STOP REW FF MENU GUIDE EXIT INFO 1 2 3 4 5 6 7 [...]

56 20. APPENDIX Button Name Functions T APE System-OFF POWER VOL UP VOL DN CH UP CH DN MUTE PRE-CH UP DN LEFT RIGHT SELECT PLAY STOP REW FF I<<, MENU >>I, GUIDE O, EXIT II, INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTER OFF ON/OFF PLAY(A) STOP(A) REW(A) FF(A) R-PLAY(A) Rec-MUTE(A) RECORD(A) PAUSE(A) Button Name Functions CD System-OFF POWER VOL[...]

57 20. APPENDIX Button Name Functions AUX System-OFF POWER VOL UP VOL DN CH UP CH DN MUTE PRE-CH UP DN LEFT RIGHT SELECT PLAY STOP REW FF I<<, MENU >>I, GUIDE O, EXIT II, INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTER OFF ON/OFF VOL UP VOL DN CH UP CH DN MUTE PREV UP DN LEFT RIGHT SELECT MENU GUIDE EXIT INFO 1 2 3 4 5 6 7 8 9 0 DISPLAY ENTER Bu[...]

58 Set-Up Code Table Manufacturer/Brand Set-Up Code Number ADC 007 ADCOM 082 092 225 161 269 AIWA 170 018 104 202 203 213 211 188 AKAI 138 189 AMC 125 126 127 128 258 281 282 038 AMEND 054 AMX 196 ANGSTROM 142 ARCAM 141 ATLANTIC TECHNOLOGY 34 2 AUDIO ACCESS 147 AUDIO ALCHEMY 135 AUDIO DESIGN 194 221 011 AUDIO EASE 021 196 207 AUDIO FILE 071 AUDIO M[...]

59 Set-Up Code Table AUDIO Manufacturer/Brand Set-Up Code Number MCS 076 MERIDIAN 100 012 013 MITSUBISHI 242 243 204 MONDIAL 157 158 042 043 081 112 MYRYAD 276 293 NAD 186 113 283 NAKAMICHI 111 244 245 172 183 287 NEC 176 NIRO 343 ONKYO 017 046 064 107 108 187 079 080 090 179 209 270 275 OPTIMUS 026 041 138 OUTLAW 342 PANASONIC 032 195 219 177 292 [...]

60 Set-Up Code Table SAT Manufacturer/Brand Set-Up Code Number CABLEVISION / VOOM 148 ECHOSTAR /DISH 122 EXPRESSVU 122 GENERAL ELECTRIC 151 106 150 GENERAL INSTRUMENT 148 GOI 122 HITACHI 139 140 HTS 122 HUGHES 068 154 161 162 165 166 JVC 122 MAGNAVOX 136 MEMOREX 136 MITSUBISHI 068 154 MOTOROLA 148 NEXT LEVEL 148 PANASONIC 142 PAYSAT 136 PHILIPS 152[...]

61 Set-Up Code Table TV Manufacturer/Brand Set-Up Code Number ADMIRAL 072 081 161 160 ADVENT 247 AKAI 197 146 248 A MARK 112 143 AMPRO 167 073 157 183 AMSTRAD 052 ANAM 043 054 056 080 112 131 AOC 197 004 112 058 APEX DIGITAL 006 AUDIOVOX 076 BLAUPUNKT 088 CAIRN 201 CANDLE 197 002 003 004 CAPEHART 058 CETRONIC 043 CITIZEN 197 002 003 004 043 101 103[...]

62 Set-Up Code Table TV Manufacturer/Brand Set-Up Code Number MEMOREX 007 072 004 METZ 088 MGA 197 004 024 028 042 MINERVA 088 MITSUBISHI 109 124 024 004 028 040 042 146 191 MTC 197 004 062 101 NAD 015 025 NEC 132 130 134 197 040 016 024 056 019 237 NIKEI 043 ONKING 043 ONWA 043 OPTONICA 019 081 ORION 096 PANASONIC 034 056 080 092 164 208 160 261 P[...]

63 Set-Up Code Table Manufacturer/Brand Set-Up Code Number AIWA 034 161 AKAI 016 146 043 046 124 125 142 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 BROOKSONIC 035 037 129 CANON 028 031 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 041 DAEWOO 111 116 117 119 005 007 010 065 108 110 112 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECT[...]

64 Set-Up Code Table VCR Manufacturer/Brand Set-Up Code Number RUNCO 148 SALORA 014 SAMSUNG 102 104 113 115 112 120 032 040 066 107 109 122 125 SANSUI 022 043 048 135 SANYO 003 010 007 014 134 102 SCOTT 017 037 112 129 131 SEARS 003 008 010 014 081 013 101 009 017 073 112 SHARP 149 054 031 159 165 SHINTOM 024 SIGNATURE 034 SONY 056 057 058 077 052 [...]

65 Set-Up Code Table CABLE/WEBTV Manufacturer/Brand Set-Up Code Number ABC 004 103 003 039 042 046 053 ADELPHIA 043 074 ADVANCED NEWHOUSE 043 ALTRIO 043 AMERICAST 099 ARCHER 005 007 014 ARMSTONG 074 AT&T BROADBAND 074 ATLANTIC BROADBAND 043 074 BELL SOUTH 099 BLUE RIDGE 043 074 BRESNAN 074 BUCKEYE COMM 074 CABLEVISION 043 074 108 CENTURION 092 [...]

66 Set-Up Code Table CABLE/WEBTV Manufacturer/Brand Set-Up Code Number SEREN 043 SERVICE ELECTRIC 074 SHAW 074 SIGECOM 043 SONY 096 108 SPRUCER 047 078 STARCOM 002 004 008 009 STARGATE 008 030 097 104 SUSQUEHANNA 043 074 TIME WARNER 043 074 TOCOM 039 040 056 TOSHIBA 052 UNITED CABLE 004 053 UNIVERSAL 005 007 014 032 035 VIDEOTRON 043 VIEWSTAR 012 0[...]

67 Set-Up Code Table Set-Up Code Table Manufacturer/Brand Set-Up Code Number ALPINE 098 APEX DIGITAL 087 111 115 DENON 007 080 138 GE 026 027 GO VIDEO 137 HARMAN KARDON 084 140 HITACHI 101 INTEGRA 142 JVC 012 KLH 135 LG/GOLDSTAR 091 057 074 MAGNAVOX 066 096 MARANTZ 083 095 MEMOREX 163 MINTEK 111 MITSUBISHI 017 MYRYAD 102 134 NAD 088 NAKAMICHI 103 O[...]

68 Set-Up Code Table CD Manufacturer/Brand Set-Up Code Number ADCOM 062 042 AIWA 059 065 088 089 105 122 170 187 AKAI 085 195 202 AMC 231 232 AMEND 118 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 046 BSR 037 057 CALIFORNIA AUDIO 103 008 CAPETRONIC 063 CARRERA 057 080 CARVER 185 041 044 050 086 107 130 134 135 138 139 203 204 167 CA[...]

69 Set-Up Code Table CD Manufacturer/Brand Set-Up Code Number QUASAR 103 008 RADIO SHACK 182 RCA 017 042 150 REALISTIC 042 050 051 102 181 182 187 ROTEL 044 107 161 178 250 SAE 044 107 SANSUI 044 069 107 128 171 190 125 SANYO 050 SCOTT 069 102 SHARP 026 031 051 066 SHERWOOD 003 019 051 096 112 115 119 166 SIGNATURE 033 SONY 048 081 097 126 133 177 [...]

70 Set-Up Code Table Manufacturer/Brand Set-Up Code Number DENON 206 207 MAGNAVOX 032 121 MARANTZ 211 MITSUBISHI 121 NAD 121 PANASONIC 113 PHILIPS 032 PIONEER 106 107 108 121 RCA 002 RUNCO 127 SONY 053 110 TECHNICS 113 THETA DIGITAL 032 TOSHIBA 106 YAMAHA 129 LD ● Note : These codes are stored in DVD.[...]

71 Set-Up Code Table Manufacturer/Brand Set-Up Code Number CARVER 008 027 024 036 DENON 105 227 HARMAN KARDON 233 JVC 239 240 KENWOOD 013 023 145 LUXMAN 035 MAGNAVOX 027 MARANTZ 027 MITSUBISHI 242 243 NAKAMICHI 244 245 ONKYO 012 018 019 PHILIPS 027 PIONEER 003 039 050 066 SANSUI 027 SHERWOOD 004 028 030 033 034 SONY 020 022 052 084 089 TEAC 059 YAM[...]

72 Set-Up Code Table Manufacturer/Brand Set-Up Code Number HUGHES 117 PHILIPS 090 117 RCA 109 REPLAY NETWORKS 075 SONY 104 105 TIVO 090 117 DVR[...]

73 Set-Up Code Table Manufacturer/Brand Set-Up Code Number 3M 152 AIWA 164 ARCHER 155 AUTON 191 DMX 156 DRAPER SCREEN 204 DREAMVISION 097 DWIN 080 253 EVERQUEST 206 EXTRON 151 FAROUDJA 184 FUJI 209 JERROLD 153 JVC 185 HUNTER DOUGLAS 219 KENWOOD 185 LITE-TOUCH 208 212 LUTRON 158 159 077 MAKITA 186 201 MINDPATH 205 NILES 160 187 NSM 161 PIANO DISC PL[...]

74 ................ Notes ................[...]

75 ................ Notes ................[...]

76 ................ Notes ................[...]

77 ................ Notes ................[...]

[...]

OCE-0016H Rev03[...]