Ricoh 1013F manuel d'utilisation

Paper t ype: OK Pr ince Eco G10 0(55kg), Paper Thic kness=80 µ m // Pages in book= 84 // Pri nt scale =81% Gap (when print ed at 81% sc ale) = Pages in book × Pape r thi ckness / 2 = 3.360000 mm 1013/1013F Operating Instructions Copy Reference RICOH COMP ANY, LT D. 15-5, Mi nami Aoyam a 1-chome, Minato- ku, Tokyo 107 -8544, Japan Phone: +8 1-(0)3[...]

Paper t ype: OK Pr ince Eco G10 0(55kg), Paper Thic kness=80 µ m // Pages in book= 84 // Pri nt scale =81% Gap (when print ed at 81% sc ale) = Pages in book × Pape r thi ckness / 2 = 3.36 0000 mm In acco rdance w ith IEC 6041 7, th is machine uses the follow ing symbol s for t he main po wer swit ch: a a a a means POWER ON. c c c c means STA ND B[...]

i Safety Information When using your equip ment, the following safety precaution s should always be followed. Safety Duri ng Operati on In th is ma nual, the follow ing imp ortant symbo ls ar e used: R WARNIN G: R WARNING: Indicates a potent ially hazard ous si tuation which, if instru ctions are not followed, could result in death or serious injur[...]

ii R CAUT ION: • Protect the equipment from dampness or wet weather, such as rain, snow, and so on. • Unplug the power cord from the wal l outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. • When you disconnect the power plug from the wall outlet[...]

iii Positi ons of Labels and Hallmarks for R R R R WARNIN G and R R R R CAUT ION This mach ine has labels and hallmark s for R WARNING, R CAUTION at the positions shown below. For safety, please follo w the instructions and handle the mach ine a s i ndicat ed . The ins ide of the mac hine beco mes ver y hot. Do not touch the inside. Doing so could [...]

iv How to Read this Manual Symb ols In th is manual, the followi ng symbols are used: R WARNING: This symbol ind icates a potentially hazardous situation that might result in death or serious i njury when you misuse th e machine without fol lowing the in- struc tions under thi s symb ol. Be su re to re ad t he ins tructi ons , all of whic h ar e de[...]

v Machi ne Types This machin e has two m odels. Typ e 2 machine i s instal led with t he fax uni t as a standard. Type 1 Type 2 Fax unit Option Standar d Printer unit Option Option Stel laC-A E-CopyF _V4_FM. book P age v W ednesd ay, July 4, 20 01 11: 21 AM[...]

vi What You Can Do with This Machine Stel laC-A E-CopyF _V4_FM .book P age vi Wednes day, J uly 4, 2001 11 :21 AM[...]

vii TABLE OF CONTENTS Guid e to Comp one nts ...... .... .... .... .... ...... .... .... ... .... .... ...... .... .... .... .... ...... .... . 1 Option s ....... .... ...... .... ...... .... ...... .... ...... .... ...... .... ....... ...... .... ...... .... ...... .... ...... 3 Con trol Pa nel ........ ...... .... .... .... .... ...... .... .... [...]

viii Othe r Funct ion s .... .... .... .... ...... .... .... .... .... ...... .... ... .... .... ...... .... .... .... .... .... ... 31 User Codes .... .... ....... ....... .... ....... ..... ....... .... ....... ....... ..... ...... ..... ....... ..... ...... . 31 Auto Star t ....... .... ....... ....... .... ....... ..... ....... .... ....... ...[...]

ix 6. Spec ificat ions Mainfr ame. .... ...... .... ...... .... ...... .... ...... .... ...... ...... ..... ...... .... ...... .... ...... .... ...... 6 5 Docu ment Fe ede r (ADF) ( Optio n for Ty pe 1) .. .... .... .... ...... .... .... .... .... ..... 68 Pape r Tr ay U nit (Opti on) ... .... ...... .... .... .... .... ..... .... .... .... .... ..[...]

x Stel laC-A E-CopyF _V4_FM. book P age x W ednesd ay, July 4, 20 01 11: 21 AM[...]

1 Guide to Co mponent s 1. Exposur e glass cover Lower the ex posure glass cover over th e original placed on the exposure glass f or copyi ng. 2. Document feeder (ADF) (Option for Ty pe 1) Originals wil l be fed automatical ly. 3. Exposur e glass Positi on origi nal s here f ace d own for cop- ying . See p.1 0 “Or igin als”. 4. Internal tray C[...]

2 8. On indicator This indicator lights up when the opera- tion switch is turned on, and goes off when the switch is turned off. 9. Operation switch Press this switch to turn the power on (the On indicator lights up) . To turn the power off, pr ess this switch a gain (the On indicator g oes off). 10. Co ntrol pane l See p.4 “ Co ntrol Panel ” .[...]

3 Optio ns 1. Document feeder (ADF) (Option for Ty pe 1) Originals wil l be fed automatical ly. 2. Pape r tra y uni t Holds 500 sheets of paper. Other op tions: • 32MB copier memory unit Increases memory capacity. Stel laC-A E-CopyF _V4_FM. book P age 3 W ednesd ay, July 4, 20 01 11: 21 AM[...]

4 Control Panel ❖ ❖ ❖ ❖ Copi er only ❖ ❖ ❖ ❖ Fax and/or printer installed 1. Indicators f or fax mode (Fax in- stalled machine only) See the F acsimile Reference manual. 2. { { { { Facsim ile } } } } key (Fax insta lled ma- chine only) Press to use facsimile f unctions. 3. { { { { Prin ter } } } } key (Pri nter insta lled machine on[...]

5 11. { { { { Clear/Stop } } } } key While entering numbers, press to cancel a number you have entered. While copy- ing, press to stop copying. 12. { { { { Clear Modes } } } } key Press to clear th e previously entered copy job settings. 13. On i ndic ator This indicator lights up when the opera- tion switch is turned on, and goes off when the oper[...]

6 Panel D ispla y The panel display shows the status of the machine, err or messages, and func tion menu s. Important ❒ Do not apply a strong shock or force of about 30N (about 3kgf) or more to the panel display. Otherwise, the display might be damaged. Note ❒ T h e m a c h i n e i s i n C o p y m o d e w h e n t u r n e d o n . T h i s c a n b[...]

7 1. Basics Turning On t he Powe r To tu rn the mac hine on , pr ess the operat ion sw itch. Note ❒ This m ach ine au toma ticall y ente rs Ene rgy S aver m ode or turns itself off if y ou do not use the machine for a while. See “ 6. Auto Off Timer ” in the System Set- tings manual. - - - - Power swit ches This machine has two power switches.[...]

Basics 8 1 Starti ng the Machine A A A A Press the operation switch to make the On indicator go on. The display panel will c ome on. Note ❒ If the power is not turned on when the op eration switch is pressed, check if the main pow er s witch is on . If off, t urn it on. ❒ During the warm-up period (less than 20 seconds), you can use the Auto St[...]

Changing Modes 9 1 Changing Modes You can use this machine not onl y as a copi er, but optionall y as a fax machine or a printe r as w ell. (T ype 2 ma chine is ins talled with the f ax function a s the stan d- ard.) Press the { { { { Copy } } } } key to use cop y functions, or press the { { { { Facsimile } } } } key to use facs imil e func tio ns.[...]

Basics 10 1 Origina ls Sizes a nd Weights of Recommended Origina ls ❖ ❖ ❖ ❖ Metric version ❖ ❖ ❖ ❖ Inch version Non-recommended origin als for the document feeder (ADF) Placing the followi ng originals in the docum ent feeder (ADF) m ight cause paper misfeeds or damage to the originals. Place these o riginals on the exposure glass. [...]

Origin als 11 1 Original Siz es and Scanning Area/Mis sing Image Area ❖ ❖ ❖ ❖ Exposure glass ❖ ❖ ❖ ❖ Document feeder (ADF) Limitatio n ❒ Even if y ou correc tly plac e origin als in the d ocument feeder (A DF) or on the exposure glass, margins (about 4mm, 0.2") o n all four si des might not be cop- ied. Stel laC-A E-CopyF _V4[...]

Basics 12 1 Copy Paper Recommended Paper Sizes an d Types The fol lowin g limi tati ons app ly to each tr ay: *1 Paper wei ght: 80g/m 2 , 20 lb *2 Place one sheet at a time. See p.27 “ Copyin g from t he By pass Tr ay ” . Paper sizes Paper weigh t Paper capacit y Paper Tr ay A4 L , A5 K , 8 1 / 2 " × 11" L , 5 1 / 2 " × 8 1 / 2[...]

Copy Paper 13 1 Important ❒ Use of damp or curled paper may cause a misfeed. If a misfeed occurs, try turning over the paper stack in the paper tray. If there is no improvement, change to copy pap er with l ess cur l. Note ❒ Postcards should be fed from the bypass tray. ❒ When prin tin g on envelopes, note the f ollowing: • Load envelop es [...]

Basics 14 1 Note ❒ Do not use any of the follow ing kinds of p aper or a misfeed might occur. • Bent, fo lded, or c reased p aper • Damp paper • Torn pa per • Slippe ry paper • Perforated pap er • Rough paper • Thin pa per th at ha s low stiffne ss • Paper wit h much paper dust on its s urface ❒ If you make c opies on rough gr a[...]

Toner 15 1 Toner Handling Toner R WARNING: R CAUTIO N: R CAUTIO N: Important ❒ If you use toner o ther than that recommended type, a fault mi ght occur . Referenc e If you want t o add toner, see p .44 “ h Changing the Toner Car tridge ” . Toner Storage Note ❒ When stor ing toner, the fol lowing prec autions should always be followed: • S[...]

Basics 16 1 Stel laC-A E-CopyF _V4_FM .book Page 1 6 Wedn esday, July 4 , 2001 11:21 AM[...]

17 2. Copying Basi c Procedure A A A A Make sure that the machine is in Copy mode . Note ❒ If not, press the { { { { Copy } } } } key. B B B B If the machine is set for User Code, enter the code wi th th e number ke ys, and then pre ss the { { { { OK } } } } key. See p.31 “User Codes”. C C C C Make sure that there are no previ- ous settings r[...]

Copying 18 2 - - - - Auto Off The m ach ine turns its elf off au tomat - ically after your job is finished, aft er a certai n period of tim e. This fu nction is called “ Auto Off ” . Note ❒ How to exit Auto O ff mode: • Turn on the ope ration switch • Place an original in the docu- ment feeder (ADF) • Lift and l ower the exp osure glass[...]

Placin g Originals 19 2 Placing Or iginals Limitatio n ❒ Place original s after c orrection f lu- id and ink has complete ly dried. Not taking this precaution could mark the exposur e glass and caus e mark s to b e copi ed. Note ❒ Basicall y, the origin als should be aligned to the rear left corner. H o w e v e r , s o m e c o p y f u n c t i o[...]

Copying 20 2 Loading Origin als in the Document Feeder (ADF) Note ❒ The original mi ght become dirty if it is wr itten with a pencil or sim ilar tools . ❒ Do not place any foreign objects on the docu ment fee der (ADF) or c ov- er it with your hand. Referenc e Regarding originals that the docu- ment feeder (ADF) can handle, see p.10 “ Or igin[...]

Placin g Originals 21 2 C C C C Make sure that "Standard Size" is selected , and t hen pres s the { { { { OK } } } } key . Note ❒ If not, press the 0 or 1 key to sele ct it. D D D D Pre ss th e 0 0 0 0 or 1 1 1 1 key to select original size, and then press the { { { { OK } } } } key. E E E E Pre ss th e { { { { Select Pa per Tray } } } [...]

Copying 22 2 C C C C Pre ss th e 0 0 0 0 or 1 1 1 1 key to select "3. Original Siz e", and t hen pres s the { { { { OK } } } } key. Note ❒ You c an als o ente r this mode by pressing the { { { { R/# } } } } key. D D D D Pre ss th e 0 0 0 0 or 1 1 1 1 key to select "Custom Size", an d then pres s the { { { { OK } } } } key. E E[...]

Basic Funct ions 23 2 Basi c Functions Note ❒ You can select functions to be acti- vated when Sys tem Reset i s turn ed on, when En ergy Saver is turned off, or after t he machine is p ow- ered on. See p.56 “ Set tings You Can Change with the User Tools ” . ❒ You can change def ault settin gs for basic functio ns. See p.56 “ Se ttings You[...]

Copying 24 2 Selecting Copy Paper You can ma nually se lect the p aper tray for the pap er size you wi sh to use. A A A A Select t he paper t ray or bypa ss tray by pressing t he { { { { Select Paper Tray } } } } key. Stel laC-A E-CopyF _V4_FM .book Page 2 4 Wedn esday, July 4 , 2001 11:21 AM[...]

Sort 25 2 Sor t The optiona l 32MB c opier memo ry unit is re quired to us e this function. The m achine can sc an your originals into m emory and au tomatically s ort the co pies . Limitatio n ❒ The maximu m paper length for the sort fu nction is 356 mm. Note ❒ The maximu m tray ca pacity is as follows. When the number of cop- ies exceeds the [...]

Copying 26 2 D D D D Enter the number of copy sets with the numb er keys . Note ❒ The maximu m number of sets is 99. You can change the default numb er with “ 1. Max. Co py Q'ty ” i n the cop ier feat ures . See p.56 “ Settings You Can Change with the User T ools ” . ❒ To change the n umber en tered, press the { { { { Clear/Stop } [...]

Copying f rom the Bypass Tray 27 2 Copying from the By pass Tray Use th e bypa ss tray to co py onto O HP transparencies, adhesive l abels, trans- lucent paper , postca rds, envelop es, and copy paper that cannot be set in the pap er tra y. Note ❒ If you do not use standard size copy pap er, you should enter ver- tical an d hori zontal di mensio [...]

Copying 28 2 Note ❒ Set the dir ectio n of the copy pa- per to L . ❒ Swing out the exten der to sup- port pap er sizes large r than A4 L , 8 1 / 2 " × 14" L . ❒ Fan paper to get air between the sheets and avoid a multi-sheet feed. Referen ce For deta ils abo ut how to s et the copy paper, see p.28 “ When copying onto OHP transpar[...]

Copying f rom the Bypass Tray 29 2 F F F F Gently insert the OH P transpar- encies face down and adjust the pape r gui de. Importa nt ❒ The side of OHP transparencies t h a t i s c o p i e d i s f i x e d . B e f o r e you place the OHP transparen- cies in the byp ass tray , check the cutting position of the OHP transparencies. When copying onto [...]

Copying 30 2 C C C C Enter the horizontal size of the pape r wit h the nu mber keys , and then press the { { { { OK } } } } key. Note ❒ To change the n umber en tered, press the { { { { Clear/Sto p } } } } key, and then enter the new number. D D D D Enter the vertical size of the pape r with the number keys , and then pre ss th e { { { { OK } } }[...]

Othe r F unc tion s 31 2 Other Functions User Codes When user codes are set, operators mus t enter the ir user co des befo re the machine can be operated. The ma- chi ne keep s co unt o f the nu mber o f copies made under each user co de. Note ❒ When user co des are set, the ma- chine will prompt you for your user code after the powe r switch is [...]

Copying 32 2 Preset Reduce/Enlarge You ca n select a preset ratio for copy- ing. Note ❒ You can select one of 5 preset r atios (2 enlargement ratios, 3 reduction ratios) . ❒ You can change the pr eset ratios to other rati os you frequently use. See “ 3. Set Ra tio ” in p.56 “ Copier Fea- tures ” . ❒ You can sele ct a ratio r egardless[...]

Preset Redu ce/Enlarge 33 2 D D D D Place your originals, and th en pre ss th e { { { { Start } } } } key. Note ❒ When the copy paper size and the original size dif fer, set the origin al si ze. Se e p.20 “ Pl acin g Standard Size Original s ” Stel laC-A E-CopyF _V4_FM .book Page 3 3 Wedn esday, July 4 , 2001 11:21 AM[...]

Copying 34 2 Zoom You can chan ge the re product ion ra- tio in 1 % step s. Note ❒ You can change the reproduction ratio fro m 50 – 200%. ❒ You can sele ct a ratio r egardless of the size of an original or copy pa- per. With some rati os, par ts of the image might not be copied o r mar- gins will appear on copies. ❒ You can select a preset [...]

Combine 35 2 Combi ne Use this feature to comb ine two or ig- inal images onto one page. Limitatio n ❒ The machi ne cannot co py orig inals diff erent in s ize and direc tion. Note ❒ A5, 5 1 / 2 " × 8 1 / 2 " K copy paper can- not be co mbined. ❒ The number of originals copied (combined) can be 2. ❒ In this mode , the machine sel[...]

Copying 36 2 C C C C Sele ct “” with the 0 0 0 0 or 1 1 1 1 key, and then press the { { { { OK } } } } key. Note ❒ You can specify the orientat ion of orig inals. See “ 5. Orig. Ori en- tation ” in the Copier Features in p.56 “ Settings You Can Change with the User T ools ” D D D D Pre ss th e { { { { Select Pa per Tray } } } } key to[...]

Combinat ion Chart 37 2 Combination C hart The com bination chart given bel ow shows which modes can be used together. When you read the chart, please refer to the foll owing table. The f ollowi ng sho ws the com bin ation s of func tions. ✩ means that these modes can be used together . → means that these modes c annot be used together. The mod[...]

Copying 38 2 Stel laC-A E-CopyF _V4_FM .book Page 3 8 Wedn esday, July 4 , 2001 11:21 AM[...]

39 3. Troubleshooting Machine Ope ration Pr oblems General Display Machi ne's Conditio n Problem/Cause Action The machin e instruc ts you to wait. The ma chin e is war min g u p. Wai t for t he m achin e to warm- up. Referenc e You can use Auto Start mode d uring th e warm-u p period. See p .31 “ Auto Start ” . You cannot enter the desire [...]

Troublesh ooting 40 3 Canno t Mak e Cl ear Copi es Pro blem C ause Acti on Copies appear di rty. The image density is too dark. Adjust the image density. See p.23 “ Adjusting Copy Image Densi ty ” . The reverse side of an original image is c opied . The image density is too dark. Adjust the image density. See p.23 “ Adjusting Copy Image Densi[...]

Cannot Mak e Desi red Copi es 41 3 Cannot Mak e Desired C opies Combine Pro blem C ause Acti on Misfeeds occ ur frequen tly. Copy paper size setting is not correct . Set the pr oper pap er size. Se e p.48 “ Changing the Paper Size ” or p.27 “ Copying fr om the Bypass Tray ” . You can not com bine se veral func tion s. Sele cted fu nction s [...]

Troublesh ooting 42 3 h h h h Loading Paper Note ❒ If you want to change the paper size, see p.48 “ Changing the Paper Size ” . Referenc e Regarding pape r types and sizes that can be used, see p.12 “ Co py Paper ” . A A A A Make sure that the paper tray is not being used . B B B B Pull out the paper tray until it stops. C C C C Push the [...]

h Loading Paper 43 3 Note ❒ Shuffle the paper before loadin g it in the tra y. ❒ If the paper i s curl ed, load t he paper up side do wn. E E E E Readjust the back fen ce and side fences. Importa nt ❒ Whe n load in g sm all qu anti ties of copy paper, be ca reful not t o sque eze in th e side fe nce too much or pa per will not b e fed prope r[...]

Troublesh ooting 44 3 h h h h Changing the Toner Cartridge When h is displa ye d, it is time to supp ly tone r. R WARNING: R CAUTIO N: R CAUTIO N: Important ❒ If you use toner o ther than that recommended , a fault might o ccur. ❒ When adding to ner, do not turn off the power switch. If you do, your settings are cleared. ❒ Always add to ner a[...]

h Changing the Tone r Cartridge 45 3 • Press the Toner Cart ridge back ward to raise its head, and then gently pull out the bottle. • Hold the ne w bottle horizontally, an d then shake it 5 or 6 times. Note ❒ Do not remove the bl ack cap when shak ing . • Remove the black cap. Note ❒ Do not remove the inner cap. • Put the Toner Cart rid[...]

Troublesh ooting 46 3 h h h h Clearing Misfee ds R CAUTIO N: Important ❒ When cl earing misfeeds, do not t urn off the p ower switch. If you do, your copy settings are cleared. ❒ T o p r e v e n t m i s f e e d s , d o n o t l e a v e a n y t o r n s c r a p s o f p a p e r w i t h i n t h e m a - chi ne. ❒ If paper mi sfeeds occur rep eatedl[...]

h Clearing Mis feeds 47 3 Stel laC-A E-CopyF _V4_FM .book Page 4 7 Wedn esday, July 4 , 2001 11:21 AM[...]

Troublesh ooting 48 3 Changing the Pape r Size Important ❒ Select the p aper size with the user tools, or misfeeds might o ccur. Referenc e For paper sizes, weight, and capac- ity that can be loaded in each tray, see p.12 “ Copy P aper ” . Changin g the Paper Size in t he Paper Tray A A A A Make sure that the paper tray is not being used . B [...]

Changing the Paper Size 49 3 F F F F Square t he paper a nd load it in the tray . Importa nt ❒ Do not stack paper over the lim- it m ark. G G G G Adjus t the s ide and back fe nces to the new pa per size. Importa nt ❒ When setting small quantities of copy paper, be careful not to sque eze in th e side fe nce too much or pa per will not b e fed [...]

Troublesh ooting 50 3 D D D D While pressing the relea se lever, adjust the side fences . E E E E Push the met al plate down, and then square the paper and load it in the tray. Importa nt ❒ Do not stack paper over the lim- it m ark. ❒ Load paper so that the pap er touche s the r ight si de of the tray, or misfeeds might occur. Note ❒ Shuffle [...]

Changing the Paper Size 51 3 Sele cting the Paper Size with the User Tools A A A A Pre ss th e { { { { User Tools/ Counter } } } } key. B B B B Pres s th e 0 0 0 0 or 1 1 1 1 key to display "2.Syste m Settings", and then pre ss th e { { { { OK } } } } key. C C C C Pres s th e 0 0 0 0 or 1 1 1 1 key until "8. Tray Paper Size" is [...]

Troublesh ooting 52 3 Stel laC-A E-CopyF _V4_FM .book Page 5 2 Wedn esday, July 4 , 2001 11:21 AM[...]

53 4. User Tools (Copier Features) Accessi ng the User Tool s (Copie r Features) This sect ion is for th e key op erators in charge o f this m achine. The us er tool s allow you to c hange or set the m a- chine's d efault settings. Prep arat ion Always exit the user t ools when you have finished. Referenc e For details about how to access the [...]

User Tools (Co pier Featur es) 54 4 Exitin g the User Tools A A A A Pre ss th e { { { { User Tools/ Counter } } } } key. Note ❒ You can exit th e User Tool s mode by pressing the { { { { Cancel } } } } key. ❒ If you wa nt to retu rn to the p re- viou s mod e (c opy or facsimil e), press the { { { { User Tools /Coun ter } } } } key. Stel laC-A E[...]

User To ols Menu (Copier Features) 55 4 User To ols Menu (C opier Feature s) Stel laC-A E-CopyF _V4_FM .book Page 5 5 Wedn esday, July 4 , 2001 11:21 AM[...]

User Tools (Co pier Featur es) 56 4 Settings Yo u Can Ch ange with t he Us er Tools Referenc e For de tails a bout how to access the user tools, see p.53 “ Accessing th e User Tools ( Copie r Featur es) ” . Copier F eatures Menu Des cription 1. Maximum Copy Quan- tity (1. Max. Copy Q'ty) The maximum copy quantity can be set be tween 1 and [...]

Settings You Can Chan ge with the User Tools 57 4 3. Set Ratio Select which Reduce, Enlarge or Input Ratio is shown on the panel display with prio rity when the { { { { Reduce/Enlarge } } } } key is p ressed. Note ❒ Default : • Ratio 1: 50% A4 → A6 • Ratio 2: 71% A4 → A5 • Ratio 3: 93% • Ratio 4: 141% A5 → A4 • Ratio 5: 200% A6 ?[...]

User Tools (Co pier Featur es) 58 4 5. Clear all User Codes (5. Clr All User C odes) You c an cle ar al l user code s. Note ❒ The number of copies made und er the old cod e is added to th at made under the ne w user code . ❒ The number of c opies made under the de leted code is also de - leted . 6. Reset All Counter s You can reset each user co[...]

59 5. Remarks Do's and Don'ts R CAUTIO N: Important ❒ Make sure the remaining memory space is 100%, before you unplug the pow- er cord. ❒ While the machine is unplugged, you can neither send nor receive a fax. Referenc e For details, see the Facsimile Reference manual. • When you use this machine for a long time in a confined space [...]

Remarks 60 5 Where to P ut Your Mac hine Machi ne En viron ment Your machin e's location should be care fully chosen because environ mental con- diti ons g reat ly aff ect its pe rfor manc e. Optimum environm ental conditions R CAUTIO N: R CAUTIO N: R CAUTIO N: • Temperature: 10 – 32 ° C (50 – 89. 6 ° F), humidity 54% at 32 ° C, 89.6 [...]

Where to Put Your Machine 61 5 Power Connect ion R WARNING: R WARNING: R CAUTIO N: • When th e main swi tch is i n the Stand -by positi on, the opti onal anti- conden- sation heaters are on. In c ase of emergen cy, unplug the m achine's power cord. • When you unp lug the power c ord, the anti-con densation heater s turn off. • Make sure [...]

Remarks 62 5 Access t o Machine Place the machine near the power source, provi ding clearance as shown. 1. Rear : mo re tha n 1cm (0.4" ) 2. Right: more than 1cm (0.4") 3. Front: more than 75cm (29.6") 4. Left: more than 1cm (0.4") Note ❒ For information abou t required sp ace when options are installed, please co n- tact your[...]

Mainta ini ng You r Ma chine 63 5 Maintaining Yo ur Machine If the exposure glass, ex posure glass cover or docume nt feeder (ADF) white sheet is dirty, cl ean them if you find them dirty. ❖ ❖ ❖ ❖ Cleani ng the machine Wipe the machine with a soft, damp cloth. Then wipe it wi th a dry cloth to remo ve the water. Important ❒ Do not use che[...]

Remarks 64 5 Stel laC-A E-CopyF _V4_FM .book Page 6 4 Wedn esday, July 4 , 2001 11:21 AM[...]

65 6. Specifications Mainframe ❖ ❖ ❖ ❖ Confi gur atio n: Desktop ❖ ❖ ❖ ❖ Photosensitivity type: OPC drum ( Φ 30) ❖ ❖ ❖ ❖ Original s canning: One-dimensional solid scanning system through CCD ❖ ❖ ❖ ❖ Copy proc ess: Dry elec trostati c trans fer sys tem ❖ ❖ ❖ ❖ Development: Dry two -component magne tic bru sh [...]

Specificat ions 66 6 • Bypass tray (cu stom size): Vertical : 90 – 216mm, 3.5" – 8.5" Horizontal: 140 – 3 56mm, 5 .5" – 14" • Paper tra y unit: A4 L , 8 1 / 2 " × 14" L , 8 1 / 2 " × 13" L , 8 1 / 4 " × 14" L , 8 1 / 4 " × 13" L , 8 1 / 2 " × 11" L ❖ ❖ ❖ ?[...]

Mai nfr ame 67 6 ❖ ❖ ❖ ❖ Power co nsumptio n: *1 Mainframe with the optional doc ument feeder (ADF), paper tray unit. ❖ ❖ ❖ ❖ Dimensi ons (W × × × × D × × × × H up to exposure glass): • Type 1: 468 × 450 × 371mm (18.43 × 17.72 × 14.61 inch) • Type 2: 468 × 450 × 461mm (18.43 × 17.72 × 18.15 inch) ❖ ❖ ❖ ❖ [...]

Specificat ions 68 6 Document Feeder (ADF) (Option for Type 1) ❖ ❖ ❖ ❖ Mode : • ADF mode ❖ ❖ ❖ ❖ Origin al size: • A4 L – A5 KL • 8 1 / 2 " × 14" L – 5 1 / 2 " × 8 1 / 2 " KL ❖ ❖ ❖ ❖ Orig inal we igh t: • 1-s ided or igina ls: 52 – 105g/m 2 (14 – 28 lb.) ❖ ❖ ❖ ❖ Number of o rigin[...]

Paper Tray Uni t (Option ) 69 6 Paper Tray U nit (Opti on) ❖ ❖ ❖ ❖ Copy pap er wei ght : 60 – 90g/m 2 (16 – 24 lb .) ❖ ❖ ❖ ❖ Available paper size: A4 L , 8 1 / 2 " × 14 " L , 8 1 / 2 " × 13" L , 8 1 / 4 " × 14" L , 8 1 / 4 " × 13" L , 8 1 / 2 " × 11" L ❖ ❖ ❖ ❖ Maximu[...]

Specificat ions 70 6 32MB Copie r Memory Unit (Opt ion) ❖ ❖ ❖ ❖ Memory capacity: 32MB ❖ ❖ ❖ ❖ Additional function s: Increas ed m emory cap acity ❖ ❖ ❖ ❖ Number of o riginals that can b e stored: abo ut 99 pages ITU-T No.4 c hart Stel laC-A E-CopyF _V4_FM .book Page 7 0 Wedn esday, July 4 , 2001 11:21 AM[...]

71 INDEX 32MB Cop ier Memo ry Unit , 3 , 70 A Access to Machine , 62 Adju st ing Cop y Im age De nsit y , 23 Adjust Orig inal Mode , 56 Auto Off , 18 Auto Start , 31 B Basic Functions , 23 Bypas s Paper T ype , 57 Bypass tray , 2 C Changin g the Pape r Size , 48 Changing the Toner Cartrid ge , 44 Cleari ng Misf eeds , 46 Combin ation Cha rt , 37 Co[...]

72 T Toner , 15 U User Cod es , 31 User Tools , 53 V Ventil ation hole , 1 Z Zoom , 34 Stel laC-A E-CopyF _V4_FM .book Page 7 2 Wedn esday, July 4 , 2001 11:21 AM[...]

73 MEMO Stel laC-A E-CopyF _V4_FM .book Page 7 3 Wedn esday, July 4 , 2001 11:21 AM[...]

74 AE AE B045 MEMO Stel laC-A E-CopyF _V4_FM .book Page 7 4 Wedn esday, July 4 , 2001 11:21 AM[...]