Ricoh RDC-i700 manuel d'utilisation

Connecting to a Personal Computer Operation Manual To ensure correct use of your camera, read this manual carefully before use. Keep the manual handy for future use. Connecting to a Personal Computer Operation Manual RICOH CO., LTD. Ohmori NM Building 1-1 Ohmori-kita 2 chome Ota-ku, Tokyo 143-0016 Japan L2132553[...]

Ricoh Service Offices Ricoh Co., Ltd. Ohmori NM Building 1-1 Ohmori-Kita 2-chome Ota-ku, Tokyo 143-0016 JAPAN http://www.ricoh.co.jp/r_dc Ricoh Factory Service Center 3235 Sunrise Blvd., Suite2 Rancho Cordova, CA 95742 http://www.ricohzone.com/ Ricoh Europe B.V. Photo Products Division P.O. Box 75640 1118 ZR Schiphol The Netherlands http://www.rico[...]

1 How to Use the Operation Manuals Five operation manuals are supplied with this camera. Use each operation manual as shown below to suit the purpose. Open the package Simple Operation Guide This guide contains a simple explanation of the most frequently used procedures, including shooting, playback and transmitting. A useful guide for carrying aro[...]

2 CONTENTS At the end of this manual troubleshooting for error messages, alphabetical index and index by functions are listed for your convenience. How to Use the Operation Manuals ...................................................... 1 Chapter 1 Getting Started Using a Personal Computer ............................................................[...]

3 Chapter 3 Recording Images with the Camera Shooting Still Images .......................................................................... 44 Shooting ............................................................................................... 44 Checking the Image ............................................................................. [...]

4 Quick Send Settings .......................................................................... 87 Displaying the Quick Send Dial-Up Accounts ..................................... 87 Selecting a Quick Send Dial-Up Account ............................................ 88 Selecting a Quick Send Send-To Account ........................................[...]

5 Tips Saving the Camera ’ s Homepage ...................................................... 3 0 Image Capture Guide List Display .................................................. 126 Using the Microsoft Power Point Presentation Data ...................... 130 Chapter 6 Using the Extension Functions Using the RDC-i700 Explorer Plug-In ..........[...]

[...]

Chapter 1 Getting Started Using a Personal Computer ..... 8 What You Can Do Using a PC ....... 8 PC Environment ........................... 10 Connecting Methods .................... 12 Installing the USB Driver ........ 14 For Windows ................................ 14 For Macintosh .............................. 15 Installing the Application Sof[...]

8 Using a Personal Computer The range of available applications can be greatly increased by connecting the camera to a PC. What You Can Do Using a PC By connecting the camera to a PC, you can take advantage of the following functions. ■ Using the Camera Control Functions from the Browser By accessing the camera’s homepage from the PC Web browse[...]

9 1 Getting Started See • To use the Image Capture Guide List Tool Kit, after installing the software and connecting the camera according to the instructions in the latter half of this chapter, refer to Chapter 5 “ Using JOB Navi. Image Capture Guide List ” . ■ Using the RDC-i700 Explorer Plug-In / RDC-7/i700 Mounter The RDC-i700 Explorer P[...]

10 PC Environment To connect the camera to a PC, the PC must meet the following conditions. ■ For a PC running Windows One of the following Windows programs must be installed. Microsoft Windows ® 95 Microsoft Windows ® 98 Microsoft Windows ® 98 Second Edition Microsoft Windows ® NT4.0 Microsoft Windows ® 2000 CPU : Pentium or later Memory : [...]

11 1 Getting Started ■ For Macintosh • If you use the USB cable to connect the camera to a Macintosh equipped with a standard USB port, a MacOS 8.6 operating system or later version must be installed. • If you use the serial cable to connect the camera, a MacOS 8.1 operating system or later version must be installed. • CPU : PowerPC • Mem[...]

12 Connecting Methods The camera can be connected to the PC by one of the following methods. Decide which method you will use. (Connect the camera after the software has been installed.) ■ Connecting the Camera Directly to the PC This method is for connecting the camera and the PC on a one-to-one basis. ● By USB Cable If the PC has a USB port, [...]

13 1 Getting Started ■ Connecting the Camera to a Network You can connect the camera to an existing network (LAN by Ethernet, etc.) using the recommended LAN PC card. This method is useful when using the camera on several PCs or when using several cameras. HUB Ethernet cable[...]

14 Installing the USB Driver This section explains how to install the software for connecting the camera to the PC by USB cable. For Windows, follow these instructions only if connecting the camera to the PC by USB cable. If connecting by serial cable or LAN, this procedure is not necessary. For Macintosh, follow these instructions if connecting th[...]

15 1 Getting Started Installation of the software for connecting the camera by USB cable will start. Follow the instructions displayed on the screen. When installation is completed, proceed to the next step. Note • Updated information on installation is provided in the [Readme] file in the [Win98] and [Win2000] folders. If necessary, refer to thi[...]

16 Installing the Application Software This section explains how to install the various application software for using the camera. For Windows Install the application software for Windows. ■ Installing RDC-i700 Explorer Plug-In A Check that the PC is turned on. B Check that the CD-ROM supplied is inserted in the CD-ROM of the PC. C Double-click o[...]

17 1 Getting Started ■ Installing QuickTime Note • QuickTime is software for viewing a motion picture recorded with the camera. • If QuickTime 4 has already been installed on the PC, this procedure is not necessary. A Check that the PC has been turned on. B Check that the CD-ROM supplied is inserted in the CD-ROM drive of the PC. C Double-cli[...]

18 The Image Capture Guide List Tool Kit installer will start up. Follow the instructions displayed on the screen and install both the Excel and Word Image Capture Guide List Tool Kits. Note • You can choose whichever kit you need. For Macintosh This section explains how to install the application software for Macintosh. ■ Installing the RDC-7/[...]

19 1 Getting Started ■ Installing QuickTime Note • QuickTime is a software required for viewing a motion picture file with a camera. • This procedure is not required if QuickTime 4 has already been installed on your Macintosh. A Check that the PC is turned on. B Check that the CD-ROM supplied is inserted in the CD-ROM drive of the PC. C Doubl[...]

20 Connecting the Camera to a PC This section explains how to connect the camera to a PC. Connecting the Camera Directly to a PC This method is for connecting the camera directly to a PC. Important Note • The flash lamp (red) on the camera blinks while data is being transmitted. Do not disconnect the cable or turn the camera off while data is bei[...]

21 1 Getting Started C Insert the connector on the other end of the cable into the USB port of the PC. D Turn the camera on. The PC will automatically detect the equipment which has been connected and operate accordingly. If a message is displayed, follow the instructions on the screen. USB connection is completed. From this point you can connect a[...]

22 D Turn the camera on. The PC will automatically detect the equipment which has been connected and operate accordingly. If a message is displayed, follow the instructions on the screen. Connection by USB cable is completed. From this point you can connect or disconnect the camera and PC at any time simply by inserting or removing the USB cable. ?[...]

23 1 Getting Started ■ Connecting to the Serial Port (For Macintosh) You can connect the camera to a Macintosh using a serial cable for this camera. Important Note • Make sure that both the PC and the camera are turned off before connecting or disconnecting the serial cable. A Check that the PC and the camera are turned off. B Open the terminal[...]

24 Connecting the Camera to a Network You can connect the camera to an existing internal network or household network (LAN using Ethernet, etc.). Important Note • This camera is compatible with a 10BASE-T LAN (Ethernet). • To connect the camera to a LAN, it is necessary to purchase a LAN connection PC card. For details of equipment checked or r[...]

25 1 Getting Started C Insert the connection cable into the LAN connection PC card. D Insert the connector on the other end of the connection cable into the connector of the LAN cable. E Insert the connector on the other end of the LAN cable into the free terminal of the LAN hub. Connection of the camera to the LAN is now completed.[...]

26 Making the Camera Settings Normally, when the camera is connected to a PC, you can immediately access the camera using the Web browser or the PC. This is because various general settings have been made for the factory default settings. However, depending on the PC or LAN used, operation may not proceed smoothly with the settings as they are. In [...]

Chapter 2 Viewing Images on a PC Controlling the Camera from the Browser ............................ 28 Preparing the Camera .................. 28 Opening the Camera’s Homepage on the Browser .......... 28 Displaying Thumbnail Images ...................................... 31 Viewing Thumbnail Images .......... 31 Displaying File Properties .....[...]

28 Controlling the Camera from the Browser You can access the camera ’ s homepage from the PC using the Web browser and view data recorded in the camera or make various camera settings. This section explains how to access the homepage. Preparing the Camera To perform an operation when the camera is connected to a PC, set the mode dial to [ ] (PC)[...]

29 2 Viewing Images on a PC C Enter [http://] in the [Address] area at the top of the PC screen, then enter the figures of the IP address in step B . For example, if the IP address is [127.0.0.1], enter the address as follows. If the IP address is [192.168.181.240], enter the address as follows. Note • If using Netscape Communicator, enter the ad[...]

30 Tips Saving the Camera ’ s Homepage To view the camera ’ s homepage, you must input the number. By saving the homepage on the browser, you can open the page easily, simply by selecting the saved page. If you are using a LAN connection, however, you must change the camera ’ s IP address to a fixed IP address. Due to the factory default sett[...]

31 2 Viewing Images on a PC Displaying Thumbnail Images This function enables you to view still images, motion pictures, voice memos, etc. recorded with the camera on the PC screen. Viewing Thumbnail Images You can display all the data recorded in the camera (still images, motion pictures, voice memos) in thumbnail form. There are two ways of displ[...]

32 D If you wish to change the storage memory, click on [IN], [CF CARD] or [PC CARD]. If you wish to view images in another folder, click on the desired folder from the list of folders on the left of the screen. The title and the following symbols indicating file type are displayed under the data. : Still image : Text (TIFF file) and still image (n[...]

33 2 Viewing Images on a PC Displaying File Properties Perform the following procedure if you wish to check the detailed information relating to the data, for example, the shooting date or photographer. A Click on [FILE PROPERTY]. The thumbnail will be displayed in the following form. Note • If you have registered a plug-in that is compatible wit[...]

34 Checking the Data This function is for displaying and playing back data such as still images, text files, motion pictures and voice memos in the thumbnail display. ■ Still Images Perform the following procedure if you wish to view a still image in its actual size (1 pixel of the image corresponds to 1 pixel of the screen). A Click on the image[...]

35 2 Viewing Images on a PC ■ Data Other Than Still Images Perform the following procedure if you wish to display or play back data such as text files, motion pictures or voice memos. Important Note • Data other than still images (text files, motion pictures, voice memos, etc.) cannot be displayed or played back if the plug-in software (or help[...]

36 Saving Data in the PC This function enables you to save data such as images, text files, motion pictures, voice memos and pen memos as files in the PC hard disk, etc. Note • The [Save] function explained here is not a camera function, but a browser function. For further details, refer to the HELP function or operation manual for your browser. [...]

37 2 Viewing Images on a PC Note • Still images can be saved in JPEG files. In the case of Windows, however, you can also save images in BMP format. (Change the file format by [File Type] in the dialog box.) ■ Data Other Than Still Images A [For Windows] Move the mouse pointer to the data (symbol) you wish to save and click the right mouse butt[...]

38 Displaying Thumbnail Images with Capture Guide Titles This operation enables you to view images recorded according to an Image Capture Guide List (hereafter referred to as Guide List). Note • Instructions for creating the Guide List or shooting operation from the camera ’ s homepage, refer to page 97 “ Using JOB Navi. Image Capture Guide L[...]

39 2 Viewing Images on a PC D If you wish to change the storage memory, click on [IN], [CF CARD] or [PC CARD]. If you wish to view images on a different Guide List, click on the desired list from the Guide List on the left of the screen. 20 images can be displayed on one page. If there are more than 20 images, you can change the display by clicking[...]

40 Displaying File Properties If you wish to check detailed information relating to the images, such as the shooting date or photographer, perform the following procedure. A Click on [FILE PROPERTY]. A thumbnail display in the following form will be displayed.[...]

41 2 Viewing Images on a PC Displaying an Image in its Actual Size If you wish to view an image in its actual size (1 pixel of the image corresponds to 1 pixel of the screen), perform the following procedure. A Click on the image you wish to view. Click on the image in the same way for FILE PROPERTY. The image will be displayed in its actual size i[...]

42 Saving Data in the PC This function enables you to save images displayed in thumbnail form as image files on the PC hard disk, etc. Note • The functions explained here are browser functions and not camera functions. For further details, refer to the HELP function or operation manual for your browser. • Instructions for saving non-compressed [...]

Chapter 3 Recording Images with the Camera Shooting Still Images .............. 44 Shooting ....................................... 44 Checking the Image ..................... 47 Saving the Image ......................... 48 Shooting Text Files ................. 49 Shooting ....................................... 49 Saving the Image ...............[...]

44 Shooting Still Images You can shoot still images by operation from the PC. Shooting This function enables you to control the camera using the Web browser and shoot still images. A Check that the camera is properly connected to the PC, that the camera and the PC are turned on, and that the camera’s mode dial is set to [ ]. B Start the browser o[...]

45 3 Recording Images with the Camera D Check that [STILL] has been selected on the left of the screen. If it has not been selected, click on [STILL]. E Set each item. If necessary, set the various items relating to shooting from the screen. For details of each item, refer to Chapter 3 “ Shooting ” in the ‘ Camera ’ operation manual. To ret[...]

46 H Click on [START REC.]. Shooting is performed and the image is displayed in a reduced state with information such as the shooting date, etc. (A short time is required to transmit the image.) If you wish to check the image in its actual size, proceed to the next page. To save the image in the PC (on the hard disk, etc.), proceed to “ Saving th[...]

47 3 Recording Images with the Camera Checking the Image This function is for viewing the image just recorded in actual size (1 pixel of the image corresponds to 1 pixel of the screen). A Click on the reduced image. The image will be displayed in its actual size in a new window. You can save the image in the PC from this screen. See next page. B Wh[...]

48 Saving the Image This operation is for saving the image displayed on the screen on the PC disk (hard disk, etc.). A If the image is displayed in reduced size, click on the image you want to save and display it in its actual size. B [For Windows] Move the mouse pointer to the image and click the right mouse button. [For Macintosh] Move the mouse [...]

49 3 Recording Images with the Camera Shooting Text Files This function enables you to shoot text files by operation from the PC. Shooting You can control the camera using the Web browser and shoot text files. A Check that the camera is properly connected to the PC, that the camera and the PC are turned on, and that the camera ’ s mode dial is se[...]

50 D Click on [TEXT] at the left of the screen. E Set each item. If necessary, set the various items relating to shooting on the screen. For details of each item, refer to Chapter 3 “ Shooting ” of the ‘ Camera ’ operation manual. To return the settings to the status prior to shooting, click on [PRE. SETTING]. F Click on [NEXT]. The screen [...]

51 3 Recording Images with the Camera H Click on [START REC.]. Recording is performed and the following screen is displayed with information such as the shooting date, etc. Note • If the plug-in software for displaying TIFF image files has been installed in your browser, you can check the image in its actual size by clicking on the mark. To save [...]

52 Saving the Image This operation enables you to save the image just recorded on the PC disk (hard disk, etc.). A [For Windows] Move the mouse pointer to the mark and click the right mouse button. [For Macintosh] Move the mouse pointer to the mark and click while pressing the [control] key. The menu will be displayed in the position of the mouse p[...]

53 3 Recording Images with the Camera Recording Motion Pictures This function enables you to record motion pictures by operation from the PC. Recording You can control the camera using the Web browser and record motion pictures. A Check that the camera is properly connected to the PC, that the camera and the PC are turned on, and that the camera ?[...]

54 D Click on [MOVIE] at the left of the screen. E Set each item. If necessary, set the various items relating to recording on the screen. For details of each item, refer to Chapter 3 “ Shooting ” in the ‘ Camera ’ operation manual. To return the settings to the status when recording was last performed, click on [PRE. SETTING]. Note • Cha[...]

55 3 Recording Images with the Camera H Click on [START REC.]. Recording will start and the [NOW RECORDING...] message will be displayed on the screen. When the preset recording time has passed, the following screen will be displayed. Note • If the plug-in software for playing back AVI format movie files has been installed on your browser, you ca[...]

56 Saving the Motion Picture This operation enables you to save the motion picture just recorded on the PC disk (on the hard disk, etc.). A [For Windows] Move the mouse pointer to the image displayed and click the right mouse button. [For Macintosh] Move the mouse pointer to the image displayed and click while pressing the [control] key. The menu w[...]

57 3 Recording Images with the Camera Recording a Voice Memo This function enables you to record a voice memo by operation from the PC. Recording You can control the camera using the Web browser and record a voice memo. A Check that the camera is properly connected to the PC, that the camera and the PC are turned on, and that the camera ’ s mode [...]

58 D Click on [VOICE MEMO] at the left of the screen. E Set each item. If necessary, set the various items relating to recording on the screen. For details of each item, refer to Chapter 3 “ Shooting ” in the ‘ Camera ’ operation manual. To return the settings to the status at the last recording, click on [PRE. SETTING]. F Click on [NEXT]. [...]

59 3 Recording Images with the Camera H Click on [START REC.]. Recording will start and the [NOW RECORDING...] message will be displayed on the screen. When the preset recording time has elapsed, the following screen will be displayed. Note • If the plug-in software for playing back WAV format voice memo files has been installed in your browser, [...]

60 Saving the Voice Memo File This operation enables you to save the voice memo file just recorded in the PC ’ s disk (hard disk, etc.). A [For Windows] Move the mouse pointer to the area where the microphone symbol is displayed and click the right mouse button. [For Macintosh] Move the mouse pointer to the area where the microphone symbol is dis[...]

Chapter 4 Changing the Camera Settings Address Book Settings ........... 62 Displaying the Address Book ....... 62 Entering a New Address .............. 63 Editing an Address ....................... 64 Deleting an Address ..................... 65 Saving the Address Book in the PC ................................................ 65 Sending the Addre[...]

62 Address Book Settings This section explains how to check and edit the Address Book stored in the camera by using a PC. Note • For instructions on how to use the Address Book, refer to the ‘Communication/Internet’ operation manual. Displaying the Address Book This function enables you to display the Address Book stored in the camera (intern[...]

63 4 Changing the Camera Settings Entering a New Address This function enables you to enter a new address to the Address Book. A Display the Address Book. See • P.62 “ Displaying the Address Book ” B Click on [NEW ADDRESS]. The screen for setting a new address will be displayed. C Move the mouse pointer to the input item and click on the area[...]

64 Editing an Address This function enables you to edit the address information (name, e-mail address, telephone number, etc.). A Display the Address Book. See • P.62 “ Displaying the Address Book ” B Click on the name of the person whose information you wish to edit. The editing screen will be displayed. C Move the mouse pointer to the item [...]

65 4 Changing the Camera Settings Deleting an Address This function enables you to delete unwanted addresses from the Address Book. A Display the Address Book. See • P.62 “ Displaying the Address Book ” B Click on [DELETE] on the address you wish to delete . The confirmation screen will be displayed. Click on [OK] to delete the address. Savin[...]

66 B Click on [BACKUP]. The dialog box for specifying the location and file name will be displayed. C Specify the location and file name, and then click on [SAVE]. The Address Book will be saved in the PC. Note • In the case of Windows, the file name extension [.inf] will automatically be added to the end of the file name. Sending the Address Boo[...]

67 4 Changing the Camera Settings C Specify the location of the file to be downloaded, select the file and click on [Open]. The selected file name will be displayed. D Click on [Transfer]. The selected address book will be sent to the camera.[...]

68 User Information Settings This section explains how to check and edit information, such as the owner of the camera, etc. Note • For details of user information, refer to “ Registering Owner Information ” in the ‘ Camera ’ operation manual. A Check that the camera is properly connected to the PC, that the camera and the PC are turned on[...]

69 4 Changing the Camera Settings E Set each item using the mouse and keyboard. Note • If you have not yet clicked on [SAVE], you can return to the status prior to setting (the status immediately after this screen was displayed) by clicking on [PRE. SETTING]. F When you have finished making the settings, click on [SAVE]. Setting of the user infor[...]

70 Modem Settings This section explains how to set the modem loaded in the PC card slot of the camera (or connected to the camera). Note • For details of the modem settings, refer to ‘ Checking the Modem Settings ’ in the ‘ Communication/Internet ’ operation manual. A Check that the camera is properly connected to the PC, that the camera [...]

71 4 Changing the Camera Settings E Set each item using the mouse and keyboard. Note • If you have not yet clicked on [UPDATE], you can return to the status prior to setting (the status immediately after this screen was displayed) by clicking on [PRE. SETTING]. F When you have finished making the settings, click on [UPDATE]. Setting of the modem [...]

72 E-Mail Settings This section explains how to make the settings related to the camera ’ s e-mail functions. Note • For details of the e-mail settings, refer to “ Setting the E-Mail Function ” in the ‘ Communication/Internet ’ operation manual. A Check that the camera is properly connected to the PC, that the camera and the PC are turn[...]

73 4 Changing the Camera Settings E Set each item using the mouse and keyboard. Note • If you have not yet clicked on [UPDATE], you can return to the status prior to setting (the status immediately after this screen was displayed) by clicking on [PRE. SETTING]. F When you have finished making the settings, click on [UPDATE]. The e-mail settings a[...]

74 Template Settings This section explains how to set the templates which are useful for character input such as e-mail etc. Note • For details of how to use the templates, refer to “ Specifying a Template ” in the ‘ Communication/Internet ’ operation manual. Displaying the Templates This function enables you to display the list of templa[...]

75 4 Changing the Camera Settings The templates will be displayed. Creating a New Template This function enables you to create a new template. A Display the list of templates. See • P.74 “ Displaying the Templates ” B Click on [CREATE NEW TEMPLATE]. The screen for creating a new template will be displayed. C Input the template using the keybo[...]

76 D When you have finished entering the template, click on [SAVE]. The new template will be added. Editing a Template This function enables you to edit a template. A Display the list of templates. See • P.74 “ Displaying the Templates ” B Click on the template you wish to edit. The screen for editing a template will be displayed.[...]

77 4 Changing the Camera Settings C Edit the template using the keyboard. D When you have finished editing, click on [UPDATE]. The screen will return to the list of templates. Deleting a Template This function enables you to delete unwanted templates. A Display the list of templates. See • P.74 “ Displaying the Templates ” B Click on [DELETE][...]

78 Web Settings This section explains how to make the settings related to the camera ’ s Web browser functions. Note • For details of the Web settings, refer to “ Setting the Web Page ” in the ‘ Communication/Internet ’ operation manual. A Check that the camera is properly connected to the PC, that the camera and the PC are turned on, a[...]

79 4 Changing the Camera Settings E Set each item using the mouse and keyboard. Note • If you have not yet clicked on [UPDATE], you can return to the status prior to setting (the status immediately after this screen was displayed) by clicking on [PRE. SETTING]. F When you have finished making the settings, click on [UPDATE]. The settings related [...]

80 Dial-Up Account Settings This section explains how to set the dial-up accounts to be used when sending and receiving e-mail and when viewing the Web pages. Note • For details of how to use the dial-up accounts and the various settings to make, refer to “Setting a Dial-Up Account” in the ‘Communication/ Internet’ operation manual. Displ[...]

81 4 Changing the Camera Settings The list of dial-up accounts will be displayed. Entering a New Dial-Up Account This function enables you to enter a new dial-up account. A Display the list of dial-up accounts. See • P.80 “ Displaying the Dial-Up Accounts ” B Click on [NEW DIAL-UP]. The screen for setting a new dial-up account will be display[...]

82 D When you have finished making the settings, click on [SAVE]. The new dial-up account will be added. Editing a Dial-Up Account This function enables you to edit the settings related to a dial-up account. A Display the list of dial-up accounts. See • P.80 “ Displaying the Dial-Up Accounts ” B Click on the dial-up account you wish to edit. [...]

83 4 Changing the Camera Settings D When you have finished editing the settings, click on [UPDATE]. Editing of the dial-up account is now completed. Deleting a Dial-Up Account This function enables you to delete unwanted dial-up accounts. A Display the list of dial-up accounts. See • P.80 “ Displaying the Dial-Up Accounts ” B Click on [DELETE[...]

84 Direct Upload Settings This section explains how to set the folder and server for the dial-up account and send-to account for direct upload. Note • For details of how to use the direct upload, refer to “ Sending an Image Directly to a Computer ” in the ‘ Communication/Internet ’ operation manual. • For details of the settings, refer [...]

85 4 Changing the Camera Settings The list of dial-up account for direct upload will be displayed. Selecting a Direct Upload Dial-Up Account This function enables you to select a dial-up account to be used in actual direct upload. Note • The only procedure performed here is selection of the dial-up account to be used from the list. Settings (tele[...]

86 Setting the Send-To Folder Name and Server This function enables you to set the folder name and server for direct upload. A Display the list of dial-up accounts for Direct Upload. See • P.84 “ Displaying the Direct Upload Dial-Up Accounts ” B Click on [DESTI.]. The screen for setting the upload folder name and server will be displayed. C E[...]

87 4 Changing the Camera Settings Quick Send Settings This section explains how to set the dial-up account and send-to account for Quick Send. Note • For details of how to use the Quick Send, refer to “ Sending an Image using Quick Send ” in the ‘ Communication/Internet ’ operation manual. • For details of the various settings, refer to[...]

88 The list of dial-up accounts for Quick Send will be displayed. Selecting a Quick Send Dial-Up Account This function enables you to select a dial-up account to be used for actual Quick Send. Note • The only operation performed here is selection of a dial-up account from the list. Settings related to each dial-up account (telephone number, etc.)[...]

89 4 Changing the Camera Settings Selecting a Quick Send Send-To Account This function enables you to set the send-to account for Quick Send. Note • The only operation performed here is selection of the name from the list. Settings related to each send-to account (name, e-mail address, etc.) are performed in “ Address Book Settings ” (P.62). [...]

90 Selecting the Size of the Image to be Sent by Quick Send This function enables you to select the size of the image to be send by Quick Send. A Display the list of dial-up accounts for Quick Send. See • P.84 “ Displaying the Direct Upload Dial-Up Accounts ” B Click on [IMAGE SIZE]. The screen for selecting the size of the image will be disp[...]

91 4 Changing the Camera Settings Setting FTP Upload This section explains how to set the dial-up account for FTP upload, the FTP server address as the upload destination, the user account name, password, etc. Note • For details of how to use FTP upload, refer to “ Uploading an HTML File ” in the ‘ Communication/Internet ’ operation manua[...]

92 The list of dial-up account for FTP upload will be displayed. Selecting an FTP Upload Dial-Up Account This function enables you to select a dial-up account to be used in actual FTP upload. Note • The only operation performed here is selection of a dial-up account from the list. Settings related to each dial-up account (telephone number, etc.) [...]

93 4 Changing the Camera Settings Setting a Server for FTP Upload This function enables you to set the FTP server for FTP upload, the account and password for accessing the server, etc. A Display the list of dial-up accounts for FTP Upload. See • P.91 “ Displaying the FTP Upload Dial-Up Accounts ” B Click on [SEND TO]. The setup screen relati[...]

94 Making a Backup/Restoring the Camera Settings This section explains how to save all the information currently stored in the camera (all information other than recorded images, motion pictures, voice memo data, etc.) in the PC, and how to restore the backup information to the camera. Note • This function can be used in the following cases. • [...]

95 4 Changing the Camera Settings D Specify the location and file name and then click on [Save]. The camera settings will be saved in the PC. Note • The file name extension [.bak] will be automatically attached at the end of the file name. Restoring the Backup Settings to the Camera This function enables you to restore the camera settings file sa[...]

96 D Specify the location of the file to be restored and select a file, then click on [OPEN]. The selected file will be displayed on the screen. E Click on [RESTORE]. The selected backup file will be transferred to the camera. F Turn the power off and turn it on again about 5 seconds later. The settings transferred to the camera will be effective.[...]

Chapter 5 Using JOB Navi. Image Capture Guide List JOB Navi. Image Capture Guide List ................................. 98 Role of Guide List ......................... 98 Creating a Guide List ................... 98 Using the Guide List ..................... 99 Using the Image Capture Guide List on Excel ............... 100 Creating a Guide List ..[...]

98 JOB Navi. Image Capture Guide List First of all, it is necessary to explain what a JOB Navi. Image Capture Guide List is. Role of Guide List The JOB Navi. Image Capture Guide List (hereafter referred to as Guide List) function enables you to record images while checking the Guide List (a list of images to be recorded) prepared in advance to ensu[...]

99 5 Using JOB Navi. Image Capture Guide List In the case of Excel, you should specify the range of cells for image names, write it out as a Guide List and save it in the Template folder for the CF (or PC) card. All that remains then is to insert the card into the camera. There is also a function for sending the images one at a time recorded in acc[...]

100 Using the Image Capture Guide List on Excel This section explains the series of operations involved in creating an Image Capture Guide List (hereafter referred to as Guide List) based on an Excel table and transferring it to the camera, recording images according to the list and incorporating the recorded images in a table. Important Note • T[...]

101 5 Using JOB Navi. Image Capture Guide List C Click on [Enable Macros]. The document will be displayed. Check that the following 4 buttons have been added to the toolbar. D Click on [Create Image Capture Guidefile]. The window for specifying the scope of the image titles will be displayed. E Select the scope of the image titles in the Guide List[...]

102 Recording Images Using the Guide List This function enables you to record images according to the Guide List transferred to the camera. Note • You cannot change the storage memory when the image menu is displayed. • For information on the display when you shoot using the Image Capture Guide List, see “ Image Capture Guide List Display ”[...]

103 5 Using JOB Navi. Image Capture Guide List H Repeat steps F and G until all the images have been recorded. I When all the images have been recorded, select [EXIT]. Note • If the Keep Settings mode for [GUIDE LIST] is set to [ON], even if the mode dial is set to another setting during recording (steps C or D ) or the power is turned off, you c[...]

104 H Select the Guide List and then click on [OK]. I Select the first cell in which a camera image will be pasted (E13 in this sample) and click on [OK]. The image has now been pasted in the document. Note • If several images are recorded for one frame, the window for selecting an image will be displayed. Follow the instructions and select an im[...]

105 5 Using JOB Navi. Image Capture Guide List ■ Other Functions The [Update image title] and [Paste Selected Images] functions are used as follows. ● Update image title After the Guide List created on Excel has been sent to the camera, if the image list is changed (by adding, deleting, or changing the titles) by camera operation (operating the[...]

106 Using the Image Capture Guide List on Word This section explains the series of operations, using sample templates, for creating an Image Capture Guide List (hereafter referred to as Guide List) based on Word, transferring it to the camera, recording images according to the list and incorporating the recorded images in a document. Important Note[...]

107 5 Using JOB Navi. Image Capture Guide List C Click on [Enable Macros]. The document will be displayed. Check that the following 3 buttons have been added to the tool bar. D Click on the [Create Image Capture Guide File] button. The dialog box for specifying the location of the Guide List file, the Guide List title and Guide List file name will [...]

108 Recording Images Using the Guide List This operation is the same as in “ Recording Images Using the Guide List ” for Excel (P.102). When you have finished recording images, connect the camera and the PC once more. Pasting the Recorded Images into a Document This function enables you to paste images recorded with the camera into a Microsoft [...]

109 5 Using JOB Navi. Image Capture Guide List Note • If several images are recorded for 1 frame, the window for selecting an image will be displayed. Follow the instructions and select an image. ■ Other Functions The [Paste Selected Images] function is for pasting only the specified image in the list from the specified folder in the PC. A Use [...]

110 Setting the Image Capture Guide List on the Browser This section explains how to create an Image Capture Guide List (hereafter referred to as Guide List) on the browser, and how to transfer a Guide List saved as a file to the camera. Note • Instructions on how to record images using the Guide List are given in “Recording Images Using the Gu[...]

111 5 Using JOB Navi. Image Capture Guide List D Check that [GUIDE LIST] on the left of the screen has been selected. If [HTML TEMPLATE] has been selected, click on [GUIDE LIST]. E If you wish to change the storage memory, click on [IN], [CF CARD] or [PC CARD]. The Guide Lists recorded in the selected storage memory will be displayed. The [Guide Li[...]

112 Creating a New Guide List This function enables you to create a new Guide List. A Display the Guide Lists and select the storage memory in which you wish to add a new Guide List. The Guide Lists currently stored in that particular storage memory will be displayed. See • P.110 “ Displaying the Guide Lists ” B Click on [NEW LIST]. The scree[...]

113 5 Using JOB Navi. Image Capture Guide List D Move the mouse pointer to the [IMAGE TITLE] area, click on the area and add the list of images in the new Guide List using the keyboard. One line is for one image title. If you input characters in the first line of [IMAGE TITLE], that becomes the first image title. If you press the [Enter] key or [re[...]

114 Editing the Guide List This function enables you to edit the images (image titles and number of images) in the Guide List. A Display the Guide List containing the list you wish to edit. See • P.110 “ Displaying the Guide Lists ” B Click on the title of the list you wish to edit. The titles of the images that have been set in the list will[...]

115 5 Using JOB Navi. Image Capture Guide List ■ Adding an Image A Click on [ADD IMAGE TITLE] on the image title screen. The screen for editing the image titles will be displayed. B Move the mouse pointer to the [NEW IMAGE TITLE] area, click on the area and add the image title using the keyboard. Use one line for one image title.[...]

116 C When you have finished adding image titles, click on [SAVE]. The screen will return to the image title screen. If you then click on [OK], the screen will return to the screen showing the Guide Lists. ■ Editing an Image Title A Click on the image title that you wish to edit on the image title screen. The screen for editing the image titles w[...]

117 5 Using JOB Navi. Image Capture Guide List C When you have finished editing, click on [UPDATE]. The screen will return to the image title screen. If you then click on [CANCEL], the screen will return to the screen showing the Guide Lists. ■ Deleting an Image Important Note • DELETE will automatically delete the image recorded under that tit[...]

118 Deleting a Guide List This function enables you to delete a Guide List. A Display the Guide List containing the list you wish to delete. See • P.110 “ Displaying the Guide Lists ” B Click on [DELETE] for the list you wish to delete. The confirmation screen will be displayed. The list will be delete when you click on [OK].[...]

119 5 Using JOB Navi. Image Capture Guide List Saving the Guide List on the PC This function enables you to save the Guide List on the hard disk, etc. of the PC. Note • Use this function in the following cases: • When you want to make a backup file of important Guide Lists. • When you want joint possession of the same Guide List, like the tem[...]

120 Sending the Guide List Saved in the PC to the Camera This function enables you to download the Guide List file saved on the PC hard disk, etc., and transfer it to the camera media. A Display the Guide Lists and select the media to which the list is to be sent. The Guide Lists currently in the media are displayed. See • P.110 “ Displaying th[...]

121 5 Using JOB Navi. Image Capture Guide List D Click on [Transfer]. The selected Guide List will be transferred to the camera media. When the transfer is completed, the Guide Lists including this list will be displayed.[...]

122 Setting the Image Capture Guide List Independently on the Camera This section explains how to add a new Image Capture Guide List (hereafter referred to as Guide List), and add, change or rearrange the image titles, etc. Note • Instructions for recording images using the Guide List are given in “ Recording Images Using the Guide List ” (P.[...]

123 5 Using JOB Navi. Image Capture Guide List Creating a New Guide List This function enables you to add a new list. A Select [ADD]. B Select and input the list title using the on-screen keypad. The title must be within 16 characters. See •“ Using the On-screen Keypad ” in the ‘ Camera ’ operation manual Add the required images by step B[...]

124 B Select [ADD], then select of the image title and input the image title using the on-screen keypad. The title must be within 12 characters. See •“ Using the On-screen Keypad ” in the ‘ Camera ’ operation manual C Select [OK]. The image title will be added. To continue editing, repeat steps B and C . D Select [EXIT]. The screen will r[...]

125 5 Using JOB Navi. Image Capture Guide List ■ Rearranging the Image List A Select the Guide List where you wish to rearrange the list of images and select [EDIT]. B Select the image title to be rearranged from the image list and then select [ 왖 UP] or [DW 왔 ]. The selected image title will move up or down depending on whether [ 왖 UP] or [...]

126 Tips Image Capture Guide List Display The following display is used when you shoot using the Image Capture Guide List. Use this Guide List prepared in advance to ensure no images are forgotten. The name of the destination folder in which the images of the selected Guide List are saved. “ TEMPLATE ” will be displayed when you select a templa[...]

Chapter 6 Using the Extension Functions Using the RDC-i700 Explorer Plug-In .................................... 128 Using the RDC-7/i700 Mounter .................................. 131 Making a Backup File of the Camera Settings .................... 134 Making a Backup File ................. 134 Restoring the Backup Settings to the Camera .........[...]

128 Using the RDC-i700 Explorer Plug-In If you have installed the RDC-i700 Explorer Plug-In (Windows) or the RDC-7/ i700 Mounter (Macintosh), you can copy the camera data into the PC and make a backup file of the camera settings in the PC. This section explains how to use the Windows RDC-i700 Explorer Plug-In. Important Note • The flash lamp (red[...]

129 6 Using the Extension Functions D Click on [RDC-i700 Properties...]. The window for setting the camera ’ s IP address will be displayed. E Input the figures displayed on the camera ’ s LCD monitor (4 figures separated by “ . ” ). F Click [OK]. The camera is now detected by the PC. If you click [+] on the left of [RDC-i700], the camera ?[...]

130 Note • You can handle the camera ’ s storage memory in the window displayed by double clicking [My Computer]. Tips Using the Microsoft Power Point Presentation Data If you copy the presentation data created using Microsoft Power Point in the camera, you can do a presentation anytime anywhere. Save the presentation data created on Power Poin[...]

131 6 Using the Extension Functions Using the RDC-7/i700 Mounter By installing the RDC-7/i700 Mounter in Macintosh, you can copy data and make a backup file of the camera in a PC. Important Note • The flash lamp (red) blinks during transmission of data to the PC except when the camera is connected to a LAN. Do not disconnect the cable or turn off[...]

132 D Select [TCP/IP] from [Control Panels] in the Apple menu and make the following settings depending on the connection method. ● USB Connection Select [RICOH RDC-i700] as [Connect via]. ● Serial Connection Select [RICOH RDC-i700] as [Connect via] and select [Using SLIP] under [Configure]. ● LAN Connection Select [Ethernet] as [Connect via][...]

133 6 Using the Extension Functions E For a LAN connection, click on the [IP Address] menu in the RDC- 7/i700 Mounter control panel and select [Set IP Address...]. Input the figures displayed on the camera ’ s LCD monitor (4 figures separated by “ . ” ) and click [OK]. F Click on [Mount] for the storage memory you wish to connect. The camera [...]

134 Making a Backup File of the Camera Settings This section explains how to [SAVE SETTING DATA] to make a backup file of all the information currently set in the camera (all information other than recorded images and motion pictures, voice memo data, etc.), and how to [RESAVE SETTING DATA] to restore the backup information to the camera. Note • [...]

135 6 Using the Extension Functions Note • In this section, the explanation uses the method of clicking the right button, but the function can also be selected from the Explorer [File] menu. ■ For Macintosh In the case of Macintosh, [Save Configuration File...] and [Restore Configuration File...] are performed using the [SETUP MENU] application[...]

136 Restoring the Backup Settings to the Camera This function enables you to restore the camera backup settings saved on a PC disk to the camera. Important Note • When this function is executed, all the other current camera settings are erased. ■ For Windows A Connect the camera correctly to the PC and set the camera ’ s mode dial to [ ]. The[...]

137 6 Using the Extension Functions ■ For Macintosh A Connect the camera correctly to the PC and set the camera ’ s mode dial to [ ]. Then turn the camera and the PC on. B Select [RDC-7/i700 Mounter] from [Control Panels] in the Apple menu. The RDC-7/i700 Mounter window will be displayed. C Click on [Set Prefs...]. Note • You can click on [Se[...]

138 Transferring a Signature File This section explains the [TRANSFER SIGNATURE] function for transferring a signature file created on the PC to the camera. Note • Signature files must be made using the paint application software. Signature File There are 3 kinds of signature data of different sizes for use in any image quality mode. The 3 kinds [...]

139 6 Using the Extension Functions ● File Format Save the image file in GIF format or BMP (Bitmap) format. In the case of GIF format, the range covered with a transmission/permeable color is the area where the photograph underneath appears transparent. For Windows A Connect the camera correctly to the PC and set the camera ’ s mode dial to [ ][...]

140 F Select the image file to be used as the signature in each image quality mode. If you select [Auto], the image file for other image quality modes will be compressed/enlarged and a signature file automatically created. G Click on [OK]. The selected image files are now transferred to the camera as signatures. For Macintosh In the case of Macinto[...]

141 6 Using the Extension Functions The dialog box for selecting the image file for the signature will be displayed. E Select [Select File...] for each size, select the image file for the signature and click on [Open]. Be sure to select the image file for each size. F Click on [Transfer]. The selected image file is transferred to the camera as a si[...]

142 Using the TWAIN Function If you use the TWAIN function, you can download, display and edit images recorded in the camera directly from the application software. However, the TWAIN function can only be used on application software that is compatible with TWAIN. Note • In general, most graphic application software is compatible with TWAIN. • [...]

143 6 Using the Extension Functions Note • If you have connected several items of TWAIN-compatible equipment, it is necessary to select which TWAIN equipment you will use before performing the operation described on the previous page. Use the function titled [Select TWAIN_32 Source...] or similar. In most cases, this item is found next to [TWAIN_[...]

144 For Macintosh This section explains how to use the TWAIN function on a Macintosh. A Check that the camera is properly connected to the PC, that the camera is turned on and that the camera ’ s mode dial is set to [ ]. B Mount the storage media of the camera to which you want to download using the RDC-7/i700 Mounter. Instructions on how to moun[...]

145 6 Using the Extension Functions • Depending on the connection method and conditions, the screen for inputting the camera ’ s IP address may be displayed. In this case, input the IP address displayed on the camera ’ s LCD monitor. The following will be displayed. E Click on [Select Folder...]. The dialog box will be displayed to select a f[...]

[...]

Chapter 7 Setting the Receiving PC for Direct Upload Setting the Receiving PC for Direct Upload ......................... 148 For Windows .............................. 148 For Macintosh ............................ 153[...]

148 Setting the Receiving PC for Direct Upload This section explains the preparations and settings to be made on the PC that will receive direct upload from the camera. Note • For details of how to use the direct upload function, refer to “Uploading Directly to a Computer” and “Using the Direct Upload Function” in the ‘Communication/Int[...]

149 7 Setting the Receiving PC for Direct Upload A Select [Settings] → [Control Panel] from the [Start] menu. The control panel window will be opened. B Double click on [Add/Remove Programs]. The [Add/Remove Programs Properties] window will be opened. C Click on the [Windows Setup] tab. The Windows file screen will be displayed. D Select [Communi[...]

150 ■ Preparing the Receiving PC When installation of the software is completed, perform the following operation to put the telephone in standby status. When a direct upload call comes from the camera, the telephone will automatically switch to receiving mode. A Double click on [My Computer] and then double click on [Dial-Up Networking]. B Select[...]

151 7 Setting the Receiving PC for Direct Upload G Click on [Server Types]. The screen for setting the type of server will be displayed. H Select [PPP: Internet, Windows NT Server, Windows 98] from [Type of Dial-Up Server]. I Cancel the tick from both [Enable software compression] and [Require encrypted password]. J Click on [OK] to close the [Serv[...]

152 M Set [Direct Upload Route directory] and [Direct Upload Log file name]. Direct Upload Route directory : Specify the folder to receive the incoming file. If you wish to specify a folder on the camera side, leave blank. Direct Upload Log file name : If you wish to make a log file (a record of connections and transmissions) for Direct Upload, inp[...]

153 7 Setting the Receiving PC for Direct Upload For Macintosh This section gives a broad outline of the preparations to be performed on the receiving Macintosh. For details of actual installation and setting, refer to the Macintosh and software HELP functions and the operation manual. Important Note • If you are using a MacOS version earlier tha[...]

154 ■ Preparing the Receiving Macintosh Perform the following operation to put the telephone in standby status. When a direct upload call comes from the camera, the telephone will automatically switch to receiving mode. ■ File Sharing settings A Open the File Sharing control panel. B Double-click the [Start/Stop] tab. C Check [Owner Name] and [[...]

155 7 Setting the Receiving PC for Direct Upload ■ Using the RDC-i700 Direct Communication software A Start up [RDC-i700 Direct Upload]. [RDC-i700 Direct Upload] is installed in the root folder of the startup disk immediately after installation. B If you wish to make a direct upload log file (a record of connections and transmissions), set a fold[...]

156[...]

Appendix Camera Settings When Connected to a PC ................ 158 Setting the PC Connection Environment ............................... 158 Setting the Network Environment ............................... 160 Switching Between the Modem and LAN ..................................... 162 Error Messages ..................... 163 Error Messages Displ[...]

158 Camera Settings When Connected to a PC When the camera is connected to a PC by a USB or serial cable, or by LAN, depending on the PC or network environment, the camera may not function properly unless the settings are changed. This section deals with how to change the camera settings. Setting the PC Connection Environment If the PC and the came[...]

159 Appendix A Set the mode dial to [SETUP]. The Setup menu will be displayed. B Select [PC CONNECTION]. The screen for setting the PC connection will be displayed. C Set each item. See •“ Using the On-screen Keypad ” in the ‘ Camera ’ operation manual D When you have finished making the settings, select [OK]. The settings are completed a[...]

160 Setting the Network Environment If you have connected the camera to a network using a LAN connection PC card, set the host name and various other addresses in order to send and receive data between the camera and other LAN equipment or a network. When the camera leaves the factory, the settings are relatively common settings so normally there i[...]

161 Appendix A Set the mode dial to [SETUP]. The Setup menu will be displayed. B Select [NETWORK]. The screen for setting the network environment will be displayed. C Set the various items. See •“ Using the On-screen Keypad ” in the ‘ Camera ’ operation manual. D When you have finished making the settings, select [OK]. Setting is complete[...]

162 Switching Between the Modem and LAN This function enables you to choose whether to use the preset card as the [MODEM] or as the [LAN]. Note • Use this setting when using a PC card with both modem and LAN functions. If you normally use a communication card or LAN card, you do not need to make this setting (the card is automatically detected). [...]

163 Appendix Error Messages In the case of misoperation or of failure due to some problem or other, an error message will be displayed. This section deals with the causes and remedies of problems. Note • This section explains the error messages displayed on the PC screen. For details of the error messages displayed on the camera monitor, refer to[...]

164 Error Message PCMCIA Card write- protected CF Card write-protected Card Error Memory full Recording file Error ■ Error Messages Displayed on JOB Navi. Setup Screen Error Message Input upload file name File read Error Cannot read file anymore Cannot add list anymore No PCMCIA Card installed No CF Card PCMCIA Card write- protected CF Card write[...]

165 Appendix Error Message Same name template already exists Too long file name (within 32 characters) ■ Error Messages Displayed on Setup Screen Error Message Input upload file name File read Error Cannot add Address anymore Cannot add Template anymore Cannot add Dial-up anymore Complete required information Out of range: this value cannot be us[...]

166 ■ Error Messages Displayed on Setting Backup/Restoring Screen Error Message Backup failed Input file parameter File read Error File restore Failed File write Error Other Error Messages These error messages are displayed by the software, such as the expansion functions, TWAIN driver, direct upload, etc. Error Message Other application is acces[...]

167 Appendix Error Message This drive is read-only Illegal file name No space in the drive Already contents same file name Too deep folder tree Failed to delete This file / folder cannot be transferred This file name is used by RDC-i700 Cannot move file to RDC-i700 system folder Folders cannot be added anymore Internal Error This folder already con[...]

168 Error Message Insufficient memory: Please close other applications. Cannot access ● ● TWAIN ERROR Failed to initialize Windows Socket Failed to receive Socket Data Failed to send Socket Data Failed to create Socket Cannot find necessary DLL Cannot connect to RDC- i700 Cannot communicate with RDC-i700 Cannot transfer: this file is either too[...]

169 Appendix Troubleshooting When setting of the USB driver can not be correctly recognized, please make the following operations. Restoring the Device Which Could not be Used anymore A Connect the camera to the PC using the USB cable and turn the camera on. B Start the device manager. [For Windows 98] Select [Settings] → [Control Panel] from the[...]

170 Checking the Proxy Server When you can not connect to the camera by controlling the browser, please make the following procedures to check the proxy server settings. For Internet Explorer (Version 5.x) A Right-click on the [Internet Explorer] icon on the desktop and then click on [Properties]. B Click on the [Connections] tab. C Click on the [L[...]

171 Appendix Installing the Dial-Up Adapter When the dial-up adapter has not been displayed in the Network Component dialog, install the dial-up adapter in the following procedure. A Right-click on the [Network Neighborhood] icon on the desktop and then click on [Properties]. B Click on the [Confguration] tab and then click [ADD]. The [Select Netwo[...]

172 Checking the Dial-Up Settings When the dial-up server does not operate properly despite the correct coonfguration fo the receiving PC for Direct Upload, check the dial-up settings in the following procedure. For Internet Explorer (Version 5.x) A Right-click on the [Internet Explorer] icon on the desktop and then click on [Properties]. B Click o[...]

173 Appendix MEMO[...]

174 Index A Address Book Sending to a PC ............................ 66 Address book Deleting ......................................... 65 Displaying ..................................... 62 Editing ........................................... 64 Saving ........................................... 65 Application software Installing For Macintosh ...[...]

175 Appendix Motion pictures Recording ...................................... 53 N Network environment ........................ 160 P PC connection environment .............. 158 Q Quick Send Displaying the dial-up account ..... 87 Selecting a dial-up account .......... 88 Selecting a send-to name ............. 89 Selecting the size of the image to[...]

176 FORMAT Camera P.43 DATE SETTING Camera P.39 KEEP SETTING Camera P.116 BEEP SOUND Camera P.117 AUTO POWER OFF Camera P.117 LANGUAGE Camera P.119 VIDEO OUT MODE Camera P.119 LCD CONFIRMATION TIME Camera P.120 MAIL/WEB SETTING Communication/Internet P.32,41,50 DIAL-UP SETTING Communication/Internet P.24 DIRECT UPLOAD Communication/Internet P.48 AD[...]

177 Appendix FOLDER Camera P.51 VOICE MEMO Camera P.61 FOCUS MODE Camera P.70 DATE IMPRINT Camera P.71 FLASH STRENGTH Camera P.63 ISO SENSITIVITY Camera P.72 AUTO BRACKET Camera P.73 REDEYE REDUCTION Camera P.74 NON-COMPRESSED MODE Camera P.75 MONOCHROME MODE Camera P.76 INTERVAL MODE Camera P.77 SOFT MODE Camera P.78 TIME EXPOSURE MODE Camera P.79[...]

178 Camera P.89,90 Camera P.91 Camera P.103 Camera P.112 EDIT IMAGE Camera P.94 MEMO Camera P.97 COPY/MOVE Camera P.92 SEND Communication/Internet P.69,72,77 QUICK SEND Communication/Internet P.67 ◆ MENU Button FOLDER Camera P.100 PROTECT Camera P.100 DELETE ALL IMAGES Camera P.113 AUTO PLAYBACK Camera P.101 ◆ Edit Mode → Ô Button HTML FILE [...]

179 Appendix PC Mode ( ) Communication Mode ( ) Connecting to a Personal Computer E-MAIL Communication/Internet P.85 DIRECT UPLOAD Communication/Internet P.95 FAX Communication/Internet P.98 WEB Communication/Internet P.101 FTP UPLOAD Communication/Internet P.116[...]

180 Declaration of Conf or mity “ The Product complies with the requirements of the EMC Directive 89/336/EEC . ”[...]

181 Appendix INFORMA TION T O THE USER USA FCC P art15 Class B The equipment has been tested and f ound to comply with the limits for a Class B digital de vice, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against har mful interference in a residential installa- tion. This equipment generates , [...]

182 MEMO[...]

Ricoh Service Offices Ricoh Co., Ltd. Ohmori NM Building 1-1 Ohmori-Kita 2-chome Ota-ku, Tokyo 143-0016 JAPAN http://www.ricoh.co.jp/r_dc Ricoh Factory Service Center 3235 Sunrise Blvd., Suite2 Rancho Cordova, CA 95742 http://www.ricohzone.com/ Ricoh Europe B.V. Photo Products Division P.O. Box 75640 1118 ZR Schiphol The Netherlands http://www.rico[...]

Connecting to a Personal Computer Operation Manual To ensure correct use of your camera, read this manual carefully before use. Keep the manual handy for future use. Connecting to a Personal Computer Operation Manual RICOH CO., LTD. Ohmori NM Building 1-1 Ohmori-kita 2 chome Ota-ku, Tokyo 143-0016 Japan L2132553[...]