Samsung 971P manuel d'utilisation

SyncMaster 971P[...]

Model Notational Failure to follow di rections noted by this symbol could result in bodily harm or damage to the equipmen t. Prohibited Important to read and understa nd at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your co[...]

Do not use a damaged or loose plug. z This may cause electric shock or fire. Do not pull the plug out by the wire nor touch th e plug with wet hands. z This may cause electric shock or fire. Use only a pr operly gr ounded plu g and recep tacle. z An improper ground may cause electric shock or equipmen t damage. Insert the power p lug firmly so tha [...]

Installation Be sure to contact an authorized Service Cen ter, when installing yo ur monitor in a location with heavy dust, high or low temperatures, high humidity, a nd exposed to chemical substances and wh ere it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause seri ous damage to your monitor . Place your [...]

bookshelf, closet, e tc. z Any increase in the internal temperature may cau se fire. Put down the mo nitor carefully. z Failing to do so may damage th e monitor. Do not place the monitor face down. z This may damage the TFT-LCD surface. The installa tion of the bra cket must be done by a qualifie d professi onal. z Installing the bracket by unq ual[...]

Use the recomm ended deterg ent with a smooth c loth. If the conne ctor between the plug and the pin is dust y or dirty, clean it properly using a dry cloth . z A dirty connector may cause electric shock or fire. Make sure to unp lug the power cord b efore cleaning the product. z Otherwise, this may cause electric shock or fire. Unplug the pow er c[...]

the monitor could be exp osed to snow or rain . If the monitor is dropped or th e casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . z The monitor ma y malfunction, causing elect ric shock or fi re. Disconnect the plug from the outlet during storms or lig htning or if it is not used for a long period [...]

Do not insert metal objects such as chopsticks, wire and tools or inflammabl e objects such as pape r or matches in to the vent, headphone port or AV ports or etc . z This may cause electric shock or fi re. If an alien substances or water enters the product, turn the product off, unplug the pow er connector from the wall outlet and conta ct the Ser[...]

z Otherwise, this may cause heat e mi ssion from the accumulated dirt or degraded in sulation, cau sing electr ic shock or fire. Do not plac e your child ren's fav orite toys or a ny other objects of interest on the product. z Children may try to climb on the pr oduct to retrieve an ob ject. The product could fall , causing injury o r even fat[...]

Model List of Features z Magic Contrast: Implemen ts a deep color contrast of 4000:1 rati o. z Magic Speed: Provides a clea r screen without afterimages with fast response spe ed of 6ms. z Magic Stand: Provide s a high availability to fi t your environmental ne eds with a height adjustable stand (up to 60mm). z Magic Rotation: Adjust s screen autom[...]

Manual Quick Setup Gu ide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driv er, Natural Color software, A utoRotation software Cable 'DVI to D-SUB' Cable Power Cord DC- A da p ter USB Cable ( A-B T yp e cable ) Others Cleanin g Cloth Sold se p aratel y DVI Cable Do not use other cables except th e dedicated [...]

Customized Key [] You can customize key assignment for the Cu stom button according to your preferences. (Custom Key functionality) How to Adjust : MagicTune → Optional → Custom Key → MagicBright, Magi cColor, Auto Setup, Source Select, Color Tone 1) MagicBright MagicBright is a new feature p roviding opti mum viewing en vironment depending o[...]

When you press the power butto n, the monitor is on/off. >>Click here to see an animatio n clip 2) Input Source When you press the power butto n, the input source may be changed to Analog or Digita l, blinking once with blue li hgt. >>Click here to see an animatio n clip 3) Auto adjustment When you press the power button, the Auto Ad ju[...]

DVI : Connect th e DVI terminal of your monitor to yo ur computer usi ng a DVI/D-Sub cable. DC 12V : Connect a power line to a direct current power supply and th en plug it into the relevant power port. UP (USB upstre am port): Connect th e UP port of the monitor an d the USB port of the computer with the USB cable. DOWN (USB downstream port): Conn[...]

Model Connecting the Mon itor 1. Connect a power line to a dire ct current power supply and then plug it into the relevant power port. 2. Use a connection appropriate for your computer. 2-1. Using the D-Sub (analog ) connector on the video card. Connect th e DVI terminal of your monitor to the D-Sub terminal of your computer using a DVI/D-Sub cable[...]

Rotating the monit or Rotatin g the monito r (When pivoting the monitor, rotatio n angle is displayed on scre en of the monitor.) 0° 90° When rotating the screen , make sure to tilt the monitor 45 to 65 degr ees so that it does not touch the floor. When ti lting the screen backwards, do not tilt it more than 65 degrees. Installin g the Monitor Dr[...]

4. If you can see following message win dow, then click the " Continue Anyway " button. Then click " OK " button. (Microsoft ® Wind ows ® XP Operating System) 5. Monitor driver instal lation is complete d. This monitor dr iver is unde r certifying MS logo, and this installation don't damage your system. The certified dr i[...]

3. Click " Personalization " and then " Display Settings ". 4. Click " Advanced Setti ngs… ". 5. Click " Properties " in the " Monitor " tab. If the " Properties " button is deactivated, it means the conf iguration for your monitor is completed. The mo nitor can be u sed as is. If the me[...]

7. Check the " Brow se my computer for driver softwar e " checkbox and click " Let me pick from a list of de vice driver s on my com puter ". 8. Click " Have Disk… " and select the folder (for exampl e, D:Drive) where the driver setup file is located, and click " OK ". 9. Select the model that matches your[...]

Microsoft ® Windows ® XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click " Start " —> " Control Panel " then click the " Appearance and Themes " icon. 3. Click " Display " icon and choose the " Settings " tab then click " Advanced.. ". 4. Click the " Properties &[...]

5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7. Click the " Browse " button then choose A:(D:Dr iver) and choose your monitor model in [...]

This monitor driver is under certifying MS lo go, and this installation don't da mage your system. The certifie d driver will be post ed on Samsung Monitor homepag e. http://www.samsung.com/ 9. Click the " Close " button then click " OK " button continually. 10. Monitor driver instal lation is complete d. Microsoft ® Windo[...]

If you can see the " Digital Signatu re Not Found " window then click the " Yes "butto n. And click the " Finish " button then the " Close " button. Microsoft ® Windows ® M illennium Operating System 1. Click " Start " , " Setting " , " Control Panel ". 2. Double click " D[...]

One of the recent problems in usi ng a computer is that the color of the images pri nted out by a printer or other images sca nned by a scann er or a digi tal camera are n ot the same as th ose shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in a[...]

Model Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the AutoRotation installation file. 3. Select installation Language, Click "Ne xt". 4. When the Installation Shield Wizard window appears, cl ick "Next." 5. Select "I agree to the terms of the license agreement" to acce pt the terms of use[...]

Hardware z 32MB Memory above z 60MB Hard disk space above * For more information , visit the MagicTune™ website . or later. Installation Pr oblems ( Ma g icRotation ) The installation of MagicRotation can be affected by such fa ctors as the video card, motherboa rd and the network en vironment. See "Troubleshoo ting" if you have trouble[...]

Active Desktop component. * For more information, visit the MagicR otation website . * Windows ® is registered trademark o f Microsoft Corporation,Inc. Uninstall The AutoRotation program can be removed only by using the "Add or Remove Prog rams" option of the Windows ® Control Panel. Perform the following step s remove Au toRotation. 1.[...]

In most cases even simple adjust ments to Brightness, or Contrast require naviga tion of the multi- level, on-screen display (OSD) menus that are not easy to understand. Furthermore, there is no feedback to assist in correctly setting the controls of the monitor. MagicT une™ is a software utility that guides you through the tuning process with ea[...]

Button Tab Definition OK Applies any changes made and exits MagicTune™ . Reset Restores the display settings to the factory settings. Picture Tab D efinition A llows the user to adjust the scree n settings to the desired values. Brightness Makes the entire screen brighter or darker. The de tailed data of the images in the dark areas can be lost i[...]

ColorTone The tone of the color can be changed. z Warm2 - Warm1 - Cool 1 - Cool 2 - C ool 3 - Cool 4 - Cool 5 - Cool 6 - Cool 7 z Off ColorTone mode will be different according to monitor models. Some monitor will only su pport Four modes( Warm, Normal, Cool, Custom) Color Control Adjusts of the moni tor imag e color. You can change the monitor col[...]

and darkest areas of the display. Zone Off Tu rn off the zone that you have captured. Reset Returns to the the defaul t setting that ven dor has set. z Depending on the monito r models Color Control, Sharpness, Contrast, C olorTone will not be adjustabl e in MagicC olor mode of Full and Intelligent. z MagicTune™ w ill be disapp ear if you excute [...]

Image Setup z Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the scre en image area. You may relocate it to the center using the Horizon tal Control menu. z Auto Setup : Auto adjustment al lows the monitor to self-adjust to the incoming video signa l. The values of fine, coarse and position are adju sted automatically .[...]

Key MagicColor Set Customized Key to Ma gicColor. Auto Setup Set Customized Key to Auto Setup. Source Select Set Customized Key to Source Select ColorTone Set Customized Key to ColorT one Su pp ort Tab Definitio n Shows the Asset ID and the versi on number of the program, and allows you to use the Help feature. Help Visit the MagicTu ne™ website [...]

1. Cont rol "Brightn ess control bar " for matchi ng the bright ness of control patch and the brightness of backg round pattern 2. When you detect specific colo r tone on "Control patch", move the control cursor toward to the direction of the color to ne referring to "Color reference Circle". => Adjustment is fini s[...]

An error occurs when no informat ion on EDID (Extended Display Iden tification Data) exists for th e current monitor. This happens when from your de sktop, Start → Setup → Control Pan el → System → Hardware → Device Manager → Monitor is selected, the curre nt "Plug-and-play monitor" is removed and n ew hardware is searched for[...]

z MagicTune™ may no t work in case monitor is replace d or driver of graphic card is upda ted while MagicTune™ i s operating. I f so, please restart the syst em. Symptom Check List Solutions Check when MagicTune™ doe s not function properly. MagicTune™ fe ature is found only on PC (VGA) with Win dow OS that supp orts Plug and Play. * To che[...]

What is Ma g icRotation? Traditionally, computer displa ys allowed the user to view only in land scape mode. In today's information age, more user s need to view documents, web pages, ema ils, etc. in there day to day li fe. These type s of applicati ons can be bett er viewed i n portrait mode where the e ntire contents are available on the sc[...]

Rotate : Displa y will get rot ated by th e unit of 9 0 degree Rotate to 0 : Display will get rota ted to 0 degr ee from the current angle of rotation. Rotate to 90 : Display will get rotate d to 90 d egree from th e current angle of rotation.[...]

Rotate to 180 : Displ ay will get r otated to 18 0 degree fro m the current a ngle of rot ation. Rotate to 270 : Displ ay will get r otated to 27 0 degree fro m the current a ngle of rot ation.[...]

Hot key : Hot Keys are available by default an d can be changed by user. It can be assigned by user directly w ith keyboard af ter changing th e existing Ho tKey. User can create the hot key with the combin ation of Shift, Ctrl, Alt and general keys. In case only general key is pressed, it will be assigned in the form of Alt+g eneral key. Help : It[...]

2. Check if the probl em occurs with di fferent color d epths (8/16/32 bits per pixel) and different resolution modes (800 x 600, 10 24 x 768). 3. Check if the problem occurs without insta lling MagicRotation Softwa re. If the problem is repeating in any/all of the following sc enarios then it may be the problem with your installed "Displa y D[...]

Model Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If you do need assistance , please call the phone number on th e Information section or contact your de aler . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord conne[...]

Is the monitor connected using the DVI cable? You may get a b lank screen if yo u boot the system before you connect the DVI cable, or disconnect and then recon nect the DVI cable while the system is running as certain types of graphic cards do n ot se nd out video signals. Connect the DVI cable and then reboot th e system. The screen shows strange[...]

graphic card? http://www.samsung.com/monitor/magictune Did you insta ll the program? Reboot the comput er after installing the program for the first time. If a copy of the program is already installed, remove it, reboot the computer, and then install the program again. Yo u need to reboo t the computer for it to operate normally after installing or[...]

functioni ng properly . Self-Test Fea ture Check 1. Turn off both your comput er and the mo nitor. 2. Unplu g the video cab le from the b ack of the comp uter. 3. Turn on the mo nitor. If the monitor is functioning prop erly, you will see a box in the illustration below . This box appears during normal opera tion if the video cable becomes di sconn[...]

Model General General Model Name SyncMaster 971P LCD Panel Size 19" Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Inpu[...]

Environmen tal consider ations Operating Temperature: 50 °F ~ 104 °F(10 °C ~ 40 °C) Humidity: 10 % ~ 80 %, n on-condensing Storage Temperature: -4 °F ~ 113 °F (-20 °C ~ 45 °C) Humidity: 5 % ~ 95 %, non-condensin g Plug and Play Cap ability This monitor can be inst alled on any Plug & Play compatible system. Intera ction of the monitor a[...]

Preset Timing Modes If the signal transferred from the comp uter is t he same as the following Preset Timing Modes, th e screen will be adjusted automa tically (Exception : 640 x 480/60 Hz, 720 x 400/70Hz, 800 x 600/60 Hz) However, if the signal differs, the screen may go blank while the power LE D is on. Refer to the video card manual and adjust t[...]

Model Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung produ cts, please contact the SAMSUNG customer care c enter. North Americ a U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864 ) http://www.samsung.com/mx Latin America A[...]

BELGIUM 02 201 2418 http://www.samsung.com/be CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 70 70 19 70 http://www.samsung.com/dk FINLAND 030-6227 515 http://www.samsung.com/fi FRANCE 3260 SAMSUNG(7 267864) (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805-121213 (€ 0,14 /Min) htt p://www.samsung.de HUNGARY 06-80-SAMSUNG (7267[...]

PHILIPPINES 1800-10- SAMSUNG (7267864) http://www.samsung.com/ph SINGAPORE 1800-SAMSUNG (7267864) http://www.samsung.com/sg THAILAND 180 0-29-3232, 02-689 -3232 http://www.samsung.com/th TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 58 8 889 http://www.samsung.com/vn Middle East & Africa SOUTH AFRICA 0860 7267864 (SAMSUN G) http:/[...]

1. Adjust computer resolution and screen inj ection rate (refresh rate) oncomputer as describ ed below to enjoy the best qual ity of picture. You can have an uneven quali ty of picture in the screen if the best quality of picture is not provided in TFT-LCD. { Resolution: 1280 x 1024 { Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufa[...]

IMPORTADO POR: SAMSUNG ELECTRON ICS MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco . Chilpan Tultitlán, Estado de México, C .P. 54940 Tel: 01-55-574 7-5100 / 01-800 -726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Ye ongtong - gu, Suwon City, Gyeonggi -do Korea[...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n wh en switching from one image to anothe r especially after displaying a statio nary image for a long time. This guide is to demonstrate correct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover an y dama[...]

Ex) The best way to prote ct your monitor from Image retention i s to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns. When th e LC D panel is opera[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate col lection syst ems) This marking shown on the product or its literature, indicate s that it should not be dispose d with other hou sehold was tes at the end of its working life. [...]