Samsung SyncMaster 225MD manuel d'utilisation

SyncMaster 225MD Install Drive r SyncMaster 225MD[...]

Model Notational Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to the equipment. Prohibited Important to read and un derstand at all times Do not disassemble Disconnect the plug f rom the outl et Do not touch Ground to pr event an elect ric shock Power When not used f or extended period o f time, set [...]

Do not use a damaged or loose plug. z This may cause elec tric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause elec tric shock or fire. Use only a properly grounde d plug and receptacle. z An improper grou nd may cause el ectric shock or equ ipment dama ge. (Class l Equi pment only.) Insert th[...]

Installation Be sure to contact an authorized Service Center , when installi ng your monitor i n a locati on with heav y dust, high o r low tempera tures, high humidit y, and exposed to chemical su bstances a nd where it oper ates for 24 hours such as at airports, train stations etc. z Failure to do so may cause s erious dama ge to your mon itor. P[...]

z Any increase in the inte rnal temperature may ca use fire. Put down the monitor carefully. z Failing to do so may damage the monitor. Do not place the monitor face down. z This may damage th e TFT-LCD surface. The installation of the bracket must be done by a quali fied professional. z Installing the brack et by unqualifie d personnel m ay result[...]

Clean When cleaning the monitor case or the su rface of the TFT-LCD screen, wipe with a slightly moistened, so ft fabric. Do not spray water or detergen t directly onto the monitor. z This may cause dam age, electric shock or fire. Use the recommended detergen t with a smooth cloth. If the connector between the plug and the pi n is dusty or dirt y,[...]

If your monitor does not ope rate normally - in particul ar, if there is any unusual sound or smell coming from the monitor - unplug it immediately and contact an authorized dealer or the Service Center . z This may cause elec tric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. z[...]

Never insert anything metallic into the monitor openings. z This may cause el ectric sh ock, fire or injury. Do not insert metal objects such as c hopsticks, wire and tools or inflammable objects such as pape r or matches into the vent, headphone port or AV ports or etc. z This may cause elec tric shock or fire. If an alien substances or water ente[...]

Place the product out of children's reac h, as they could damage by hanging onto it. z A falling product may cause inju ry to the person or even fatal ity. When not using the product for an exte nded period of time, keep the product unplugged. z Otherwise, thi s may cause he at emission from the accumul ated dirt or degraded insu lation, caus [...]

height so that th e top of the moni tor is slightly below e ye level. z Adjust the mon itor angle so that there is no reflected light o n the screen.Try to maintain your arms p erpendicular to your armpits. z Keep your arms level with the ba ck of your hand s. z Keep the angl e of the elbow p erpendicular. z Keep the angl e of the knee s at more th[...]

Model Features Features of Di g ital Broadcastin g - A ll multimedia broadcastin g processes incl uding program creation, transmissio n, and receiving are processed di gitally, w hich allows us ers to enjoy a very h igh screen qua lity witho ut any signal l oss as well as benefit from various addit ional services . Viewin g Di g ital Broadcastin g [...]

Without Stand With Stand Manual Quick Setup Guide Warranty Card ( Not available in all locations ) User's Guide, Monitor Driver Cable D-Sub Cable Stereo Cable Power Cord Othe r Remote Control Batteries ( AAA X 2 ) Cleanin g Cloth Sold se p aratel y[...]

TV Antenna Cable ( Coaxial Cable ) RCA Cable (Video-Yellow, Audio-Red and White ) Component(P R , P B , Y) Cable S- V IDEO Cable Ear p hones/Head p hones SCART Cable DVI Cable DVI to HDMI c able HDMI Cable RCA to stereo (for PC) cable Digital audio optical output cable This is an acc essory that can be added d epending on the model. Front 1. TV/DTV[...]

1. TV/DTV This butt on is used to switch betw een normal an d DTV broadc asting signa ls. [TV] → [DTV] >>Click here to see an animatio n clip 2. PIP - Available in PC/DVI Mode In PC mode, turn s on Video or TV screens in PI P mode. 3. ▼ , ▲ Moves from one menu item to an other vertical ly or adjusts se lected menu val ues. In TV mode, s[...]

Rear (The configuration at the back of the monitor may va ry from product to product.) 1. POWER z Connect th e power cord for yo ur monitor to the POWER on the back of the moni tor. This produ ct may be used with 100 ~ 240V AC(+/- 10%). 2. DVI/PC IN / HDMI/PC/DVI-D AU DIO IN 1. PC : Connect the signal cable to the PC port on the back of your mon it[...]

4. ANT IN z Connect t he CATV cable o r TV antenna cab le to the "ANT IN" port on the re ar side of the mo nitor. Make sure to use a TV antenna cabl e (sold separate ly) as the ante nna cable. 5. HDMI IN / DIGITAL AUDIO OUT(OPTICAL) 1. HDMI IN : Connect the HDM I IN terminal at the back of your monitor to the HDMI terminal of your digit a[...]

8. z The Kensingt on lock is a device used to physically fix the system wh en using it in a public place . (The locking device has to be purchased separately.) For using a locking devi ce, contact where you purchase it. 9. COMMON INTERFACE z This contai ns informat ion on CAM insert ed in the CI slot and dis plays it. The Appli cation In fo inserti[...]

Remote Control The performance of the remote control may be affected by a TV or other electronic de vice operated near the monitor, causin g malfunction due to interference with fre q uenc y . 1. POWER 2. Number button 3. -/-- 4. TV/DTV 5. CH LIST 6. 7. MENU 8. MUTE 9. Up-Down Left-Right buttons 10. ENTER 11. RETURN 12. SOURCE 13. PRE-CH 14. GUIDE [...]

5. CH LIST It display "C hannel List" on the screen. 6. Adjusts the audio volu me. 7. MENU Opens the on-s creen menu an d exits from t he menu or close s the adjust ment menu. 8. MUTE Press to mute the sound temp orarily. Displayed on the bottom left of the screen. Press the MUTE button aga in to cancel the Mute function. Alternatively pr[...]

Then press the button ag ain to circl e through av ailable pr econfigure d modes. ( Dynamic → Standard → Movie → Custom ) PC / DVI Mode : M/B ( MagicBright™ ) MagicBright ™ is a new featu re providing t he optimum viewing env ironment dependi ng on the contents of the image you a re watching. Then press the button ag ain to circl e throug[...]

Model Connectin g the monitor 1.Connectin g to a Com p ute r 1. Connect the power cord f or your monitor to the POW ER on the back of the m onitor. Plug the power cord for the m onitor into a nearby outlet. 2. Use ap propriate co nnection f or your comput er. 2-1. Usin g the D-sub (Ana log) connector o n the video card. Connect t he signal c able t[...]

1. Using the D-sub (A nalog) connector on t he video ca rd. Connect t he signal c able to the D-SUB port on the Macinto sh computer. [PC] 2. Turn on the monito r and Macinto sh. Connectin g to Other devices This monitor allows t he user to connec t it to such inp ut devices as a DVD player, a VCR or camcorder, or a DTV or TV with out disconne cting[...]

2. Conn ect the the AUDIO OUT port of DVD/VCR/Ca mcoder to th e R-AUDIO-L port of the monitor. 3. Then, start the DVD, VC R or Camcorders with a DVD disc or tape inse rted. 4. Select AV o r S-Vide o using the SOURCE . 2. Connecting EXT.(RGB) - It only applies to AV DEVICE that sup ports SCART. Connect to the DVD Devices in put if the device has a E[...]

3. Select TV usin g the TV/DTV . 4. Select a d esired TV chan nel. Is weak signal caus ing poor reception? Purchase and install a signal amplif ier for better reception. 4. Connect ing DVD/DTV Set Top Box Connect to the DVD /DTVSet Top Box inpu t if the device has a DVD /DTV connector. You can watch Com ponent simply b y hooking up the Compon ent w[...]

HDMI cable. 2. Then, start the DVD wit h a DVD disc inserted. 3. Select HDM I using the SOURCE button. 6. Connecting Using a DVI to HDMI Cable 1. Connect the DVI out put terminal of a d igital output device to the HDMI IN terminal of the monitor using a DVI to H DMI cable. 2. Connect t he red and white j acks of an RCA to stereo (for PC) cabl e to [...]

2. Set the Inte rnal Mute On in the Sound menu usi ng the MENU bu tton. 3. Adjust the sound volume u sing the Volu me button of y our amplifier 4. If the connectio ns are set up, p ower up your monitor a nd amplifie r. Because n o sound is emit ted from th e monitor, you need to us e an amplifi er. For informa tion on how to c onnect a speaker an d[...]

1. Connec t your headph ones to the H eadphone co nnection terminal. Using the Stand This monitor su pports various types o f VESA-standard bas es. You need to either fol d or remove the base in use i n order to instal l a VESA base. 1. Folding the ba se The monitor may b e reclined from -1 to 23 degrees. 2. Attaching a base This moni tor accepts a[...]

z Do not use screws lo nger than the standa rd dimension, as they may damage th e inside of the Monitor. z For wall moun ts that do not compl y with VESA st andard screw sp ecificat ions, the l ength of the screws m ay diffe r dependin g on their specifi cations. z Do not use screws tha t do not comply w ith the VE SA standard screw s pecifications[...]

5. Monitor driver installation is completed . This monitor d river is under ce rtifying MS log o,and this ins tallation don' t damage your system.The certified driver will be posted on Samsung Moni tor Homepag e. http://www.samsung. com/ Installing the monitor driver (Manual) Windows Vi sta | Wind ows XP | Windows 2 000 | Wind ows ME | Window [...]

5. Clic k " Properties " in the " Monitor " tab . If the " Properties " button is deactivated , it means the configurat ion for your monitor is compl eted. The mo nitor can be used as is. If the message “ Windows needs… ” is di splayed, as shown in the figure below, click " Continue ". This monitor driv[...]

8. Clic k " Have Disk… " and select the folde r (for example, D:Dri ve) where the driver setup file is located, an d click " OK ". 9. Select the mode l that mat ches your monit or from the list of monitor models on the screen, a nd click " Next ". 10. Click " Close " → " Close " → " OK &[...]

3. Click " Display " icon and choo se the " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and sele ct " Driver " tab. 5. Click " Update Drive r.. " and select " Install from a list or.. " then click " Next "[...]

7. Click the " Browse " button then ch oose A:(D:Driver) a nd choose your m onitor model in the model list and click the " Next " button . 8. If you can see follo wing message wi ndow, then cl ick the " Continue Anyway " but ton. Then click " OK " button. This moni tor driver is under certif ied MS logo,a nd[...]

10. Monitor driver installation is comp leted. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose " OK " but ton on the " Insert disk " window. 2. Click the " Browse " button on the " File Nee ded " window. 3. C[...]

Linux Operating System To execute X-Wi ndow, you need to make the X 86Config file, which is a type of system settin g file. 1. Press Enter at the first and the second s creen after executin g the X86Config file. 2. The third scree n is for setting your mouse . 3. Set a mouse for you r computer. 4. The next screen is for selecti ng a keyboard . 5. S[...]

Model Input Available Mode : PC / DVI : TV : DTV : Ext. : AV : S-Video : Comp onent : HDMI The default setting may be di fferent depe nding on the selected Input Mode (input signal SOURCE selected in External Inpu t List) and the selected reso lution. OSD Description Play / Sto p Source List Use to select PC, TV, or other ex ternal input SOUR CEs c[...]

7) Component 8) HDMI 9) DTV PIP When external AV devices such as VC Rs or DVDs are connected t o the monitor, PIP allows you to watch vi deo from those de vices in a smal l window super-i mposed on the P C Video sign al. (Off / On) - Available in PC / DVI Mode Only 1) PIP : Turn the PIP Screen on or off. - The direct button on the remote control is[...]

Available Mode : PC / DVI : TV : DTV : Ext. : AV : S-Video : Compon ent : HD MI The default setting may be di fferent depe nding on the selected Input Mode (input signal SOURCE selected in External Inpu t List) and the selected reso lution. OSD Description Play / Sto p MagicBright™ MagicBright™ i s a new feat ure providing the optimu m viewing [...]

4) Custom Colour Control Adjusts the individu al R, G, B Col our Contro ls. 1) R-Gain 2) G-Gain 3) B-Gain If you adjust picture by using Colour Control f unction, Colour Tone will turn to the C ustom mode. Image Lock Image Loc k is used to fin e-tune and g et the best ima ge by removi ng noise that creates unstable ima ges with jitt er a nd shimmer[...]

Available Mode : PC / DVI : TV : DTV : Ext. : AV : S-Video : Comp onent : HDMI The default setting may be di fferent depe nding on the selected Input Mode (input signal SOURCE selected in External Inpu t List) and the selected reso lution. OSD Description Play / Sto p Mode The Monitor ha s four automat ic picture sett ings ("Dynami c", &q[...]

2) 16:9 3) Zoom1 4) Zoom2 5) 4:3 Digital NR - Digital Noise Reduction. You can turn the Noise Elim ination feature Off / Low / Medium / H igh / Auto. The Digital No ise Eliminat ion feature a llows you to e njoy clearer and crisp er images. 1) Off 2) Low 3) Medium 4) High 5) Auto Film Mode You can turn Film Mod e Off / On. The Film Mode f eature of[...]

: Choose Music w hen watching m usic videos or concerts. 3) Movie : Choose Mov ie when viewin g movies. 4) Speech : Choose Sp eech when wa tching a show that is most ly dialog ue (i.e., news). 5) Custom : Choose Custom if you want to adjust the se ttings according to personal pr eference . Custom The sound setti ngs can be adjusted t o suit your pe[...]

Available Mode : PC / DVI : TV : DTV : Ext. : AV : S-Video : Comp onent : HDMI The default setting may be di fferent depe nding on the selected Input Mode (input signal SOURCE selected in External Inpu t List) and the selected reso lution. OSD Description Play / Sto p Country Select the cou ntry in which th e product is being used be fore you use t[...]

blocking ce rtain broa dcast or vid eo programs. The Child Lo ck feature ca n be selected only from th e remote. Sort It's used to ex change the n umbers of two ch annels. Name If channel name inform ation is broadca st when you store the chan nels either manually or automatical ly, the name s are assigned to the channels dir ectly. You can ho[...]

Transparency 1) High 2) Medium 3) Low 4) Opaque Blue Screen If no signal is being recei ved or the signal is very weak, a b lue screen automatically rep laces the noisy p icture backgroun d. If you wish to continue viewing the poo r picture, you must set the "Blue screen " mode to "Off". Off On HDMI Black Level When a DVD or set[...]

| Starting | Channel | Guid e | Setup | Languag e | The company does not guarant ee the normal operation of the DTV menu for countries other than t he 6 supported c ountries ( United Kingdom, Germany, France, Ita ly, Spain, Aust ria) because only these cou ntry stand ards are supporte d. In addit ion, when the c ountry of t he broadcast s tream dif[...]

| Starting | Channel | Guide | Setup | Language | Auto Store / Manual Store / Edit Favourit e Channels / Channel List ◈ Updating th e Channel List Au tomatically You can updat e the channel li st when the bro adcaster adds new Services or if yo u move the TV to a new lo cation. 1. Press the D. MENU button to dis play the DTV menu. 2. Press the or[...]

6. Press the EXIT bu tton to exit. - Add You can use thi s function whe n one or more fav ourite chann els have been selected. 1. Press the D .MENU button to dis play the DTV men u. 2. Press the or button to sel ect "Channel", then press the ENTER button. 3. Press the or button to s elect "Edit Fa vourite Chan nels", then pr ess[...]

◈ Selecting Channe l List You can exclu de the channe ls you have chos en from the channels y ou have scanned .When you scan t hrough the stored ch annels, thos e you have ch osen to skip ar e not displayed. All chan nels that you do not specifically ch oose to skip are displayed during scannin g. 1. Press the D. MENU button to disp lay the DTV m[...]

While viewi ng a channel, a dditional in formation about the cur rent program me may be displayed . 1. While viewing a programme, pr ess the INFO bu tton The programm e informat ion is displa yed. 2. To exit from banner infor mation, pres s the INFO bu tton.[...]

| Starting | Channel | Guid e | Setup | Languag e | Now & Next Guide / Full Guide / Scheduled List / Defaul t Guide ◈ Viewing the EPG (Elect ronic Programme Gui de) Information The EPG (Electroni c Programme Gui de) informati on is provided by the broadcas ters. Program me entries may appear blank or out of date as a re sult of the inf ormati[...]

Teletext, Languages of Subtitle or Te letext, and brief summary of the highligh ted programm e are included on the detai led information. "..." w ill be appeared if t he summary is lo ng. Six channel s are displa yed. To scro ll between c hannels, move to a channe l using the or button. To display page by page, use th e P or button. ◈ U[...]

1. Press the D.MENU butto n to display th e DTV menu. 2. Pre ss the ENTER button again, t o select "Gu ide". 3. Select t he your required g uide ("Now & Next Guid e" or "Full Guide") by pre ssing the or button . 4. Pre ss the ENTER bu tton. 5. Press the green bu tton. A ll the channel lists and the favorit e channe[...]

| Starting | Channel | Guid e | Setup | Languag e | Menu Transpare ncy / Parental Lock / Su btitle / Subtitle Mode / Audio Format / Digital Te xt / Time Zone / System ◈ Adjustin g the Menu Transluc ency You can set t he transluc ency of the me nu. 1. Press the D.MENU but ton to display th e DTV menu. 2. Press the or button to select "Setup&q[...]

1. Press the D.MENU but ton to display th e DTV menu. 2. Press the or button to select "Setup", t hen press the ENTER button . 3. Press the or button to select "Subtitle ", th en press the ENTE R button. 4. Select "On" by pr essing the or butto n. Press the ENTER button. 5. Press the EXIT butto n to exit. ◈ Setting t[...]

◈ Selecting t he Time Zone (Spain only) Select the time zo ne where locate 1. Press the D.MENU but ton to display th e DTV menu. 2. Press the or button to select "Setup", t hen press the ENTER button . 3. Press the or button to sele ct "Time Zone", then press th e ENTER button. 4. Select the time zo ne where you lo cate by pre[...]

Press the ENTE R button, then the current so ftware version is shown. To display the so ftware versio n information, press the ENT ER button again. - Manual Upg rade Press the ENTER button to sear ch for new soft ware from the c urrently broadcasting channels. - Standby Mode Upgrad e : On / Off Press the ENTER bu tton. To contin ue software upg rad[...]

2. Press the or button to select "Setup", t hen press the ENTER button . 3. Press the or button to select "System ", then press th e ENTER button. 4. Press the or button to sele ct "Common In terface", t hen press the ENTER button 5. Select to " CI Menu" by pressi ng the or button, and press the ENTER button.[...]

| Starting | Channel | Guid e | Setup | Languag e | Audio Language / Subtit le Language / Telet ext Language / Prefere nce ◈ Selecting the Preferre d Language (Audio , Subtitle or Teletext) You can change t he default value for subt itle, audio t eletext lang uages. Display s the la nguage in formation for t he incomi ng strea m. 1. Press the D .[...]

Model Self-Test F eature Ch eck Check the fo llowing items yourself before calling for se rvice. Contac t the service center for problems that you ca nnot solve by your self. Self-Test Fea ture Check | Not Optimum Mode | Display Adap ter Driver Maintena nce and Clea ning | Symptoms & Reco mmended Ac tions 1. Self-Test Feature Chec k Your monito[...]

Refer to Specifications > Preset Timing Modes for the re solutions or frequenci es that are supported by the monitor. 3. Display Adapter D river Display adapter ref ers to the computer vid eo card driver. If the adapter is n ot properly set, yo u cannot adjust re solution, freq uency or colo r and you canno t instal l the monito r driver. 1. Che[...]

the info rmation in thi s section to se e if you can r emedy any prob lems yoursel f. If you do ne ed assistance, please call the phone number on the Informa tion sectio n or contac t your dealer . Installation | Scr een | Audio | Remote Cont rol 1. Problems related to Inst allation Problems rela ted to the monito r installation and their solution [...]

dark shadows. White color is poor. Power Indicator blinks green. z The monitor is curren tly saving the changes made in settings to the OSD memo ry. Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds z The monitor is using its power m anagement sy stem. z press a key on th e keyboard The scree n is blank and [...]

* Contact the vi deo card man ufacturer for deta ils. How can I set the Powe r Saving functi on? z Windows XP : Set the resolu tion in the Cont rol Panel → Appearance a nd Themes → Disp lay → Screen Saver . Set the function in the BIOS -SETUP of the computer. (Refer to Windows/Com puter Manual). z Windows ME /2000 : Set the resolu tion in the[...]

Model General General Model Name SyncMaster 22 5MD LCD Pan el Size 22" Wide diagon al (55 cm) Display area 473.76 mm(H) x 296.1 mm(V) Pixel Pitch 0.282 mm(H) x 0.282 mm(V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Resolution Optimum reso lution 1680 x 1050 @ 60 Hz Maximum resolution 1680 x 105 0 @ 60 Hz In[...]

520.0 X 439.0 X 201.9 mm / 2 0.5 X 17.3 X 7.9 inch / 7.1 kg / 15.7 lbs (W ith Stand) 520.0 X 386.0 X 65.5 mm / 20 .5 X 15.2 X 2. 6 inch (Withou t Stand) VESA Mounting Interface 100 mm X 100 m m Environmental considerations Operating Temperatu re: 50°F ~ 104°F( 10°C ~ 40°C) Humidity: 10% to 80%, Non-co ndensing Storage Temperature: -4 °F ~113 ?[...]

If the signal transf erred from the compute r is the same as the f ollowing Preset Ti ming Modes, th e screen will be adjusted automatically. Howe ver, if the signal differs, the scre en may go blan k while the po wer LED is on. Refer to the video card manual and adj ust the screen as fo llows. Table 1. Preset Timing Modes Display Mode Horizontal F[...]

Input Source Supported Syst ems AV(CVBS) NTSC-3.58, NTSC-4.43, PAL 6 0, PAL, SECAM S-VIDEO NTSC-3.58, N TSC-4.43, PAL 60, PAL , SECAM EXT NTSC-3.58, NTSC -4.43, PAL 60, PAL, SECAM, RGB TV(Analog) PAL B,G,D,K,I SECAM L/L', D,K DTV DVB-T[...]

Model Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung pr oducts, please contact the SAMSUNG custome r care center. North America U.S.A 1-800-SAMSUNG (72678 64) http://www.samsung. com CANADA 1-800-SAMSUNG (7267864) http ://www.samsung.com/ ca MEXICO 01-800-SAMSUN G (7267864) http://www.samsung. com/mx Latin Am er[...]

CZECH REPUBLI C 844 000 844 http://www.sa msung.com/cz DENMARK 70 70 19 70 http://www.samsung.com/dk FINLAND 030-6227 515 http://www.samsung. com/fi FRANCE 3260 SAMSUNG(726 7864) (€ 0,15/min) http://w ww.samsung.com/ fr GERMANY 01805-12121 3 (€ 0,14/Min ) http://www.samsung. de HUNGARY 06-80-SAMSUNG (7267864) http ://www.samsung.co m/hu ITALIA [...]

TAIWAN 0800 -329-999 http://www.samsun g.com/tw VIETNAM 1 800 588 889 http://www.samsung. com/vn Middle East & Af rica SOUTH AFRICA 0860 7267864 (SAMSU NG) http://www.samsung. com/za U.A.E 800SAMSUNG (7267 864) 8000-4726 http://www.sa msung.com/me a Terms S y nc Si g nal Sync (Synchronized) Signa ls refer to the standard si gnals that are requ [...]

country rega rdless of the location of the viewer. Sound Balance Balances the le vels of the so und coming from each speaker in televisions with two speakers. Cable TV Whereas the terres trial broadcasting is delivere d vi a frequency signals through the air, cable broadcasting is transm itted via a cable n etwork. In order to vie w cable TV, one m[...]

organiz ation that has been orga nized to pr omote its de velopment a nd manageme nt. EIAJ Electronic Industries Association of Japa n. DVI DVI is the acronym for Dig ital Video I nterface. It is a new t ype of video i nterface te chnology th at provides the maximum scre en quality for high quality displa y devices and high-end graph ics cards incl[...]

This screen is shown when scenes are captured using digital broadcasting equipm ent and they are sent in HDTV (16 :9) mode. This screen is sh own when scenes are converte d to analog broadcasting signa ls before being sent. Humans an d objects appea r heavier than in re ality. This screen is sh own when scenes crea ted via analo g signals are disp [...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retention wh en switching from one image to anothe r especially after displaying a statio na ry image for a long time. This guide is to demonstrate correct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover any damag[...]

Ex) The best way to prote ct yo ur monitor from Ima ge retention is to s et yo ur PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is operate d under normal conditions. Normal conditions are defined as con tinuously changing vi deo patterns. When the LCD panel is oper[...]

Correct Disposal of This Product (Waste Electrical & E lectronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection s ystems) This marki ng shown on t he product or its literature, in dicates that it should not be disposed w ith other hous ehold wastes at the end of it s workin g lif[...]