Sears 944.529571 manuel d'utilisation

OWNER'S MANUAL MODEL NO. 944.529571 Caution: Read and follow all Safety Rules and instructions Before Operating This Equipment ! 14_ SE IES E 27" TWO-STAGE POWE -P ELLE OW TH • Assembly • Operation • Maintenance • Service and Adjustments • Repair Parts E Sears Canada, inc., Toronto, Ontario MSB 2B8[...]

iMPORTANT Safe Operation Practices for Walk-Behind Snow Throwers This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury. & Look for this symbol to point out ira= portant safety precautions. It means CAUTION!!! BECOMEALERT!!! YOUR SAFETY [...]

6. Whencleaning, repairingorinspectingthesnowthrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wireandkeep the wireaway fromthe plug. toprevent someone from accidentally starting the engine. 7. Do not run the engine indoors, except when starting the engine and for transpo[...]

GENERAL: Craftsman products are warranted to be free from defects in materials or workmanship for a specific time period as set-out below (the "Warranty Period"). Warranties extend to the original purchaser of a Craftsman product only. Purchases made through an online auction or through any website other than www.sears.ca are excluded. Th[...]

PARTS PACKE E ELY I CARTON (1) DISCHARGE CHUTE I I I I I I [ (1) POWER CORD (198s63) (1) FUEL STABILIZER PACKET FRESH _2_-_ (1) MULTi- WRENCH (180684) SAFTEY IGNiTiON KEY(S) (193071) !1111111 (1) AUGER CONTROL ROD SHEAR BOLTS AND NUTS © (2) SHOULDER (2) LOCKNUTS BOLT 1/4-20 × 1-3/4 1/4=20 (192090) (73800400) ROTATOR HF=AD MOUNTING q I I I I (1) W[...]

ASSE BLY/PRE-OPERATION NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates. UNFOLD UPPER HANDLE . Raise upper handle to the operating position and tighten handle knobs securely. Additional carriage bolts, washers and handle knobs are in bag of parts. Use to secure upper[...]

ASS LY / P E-OPERATIC INSTALL AUGER CONTROL ROD (See Figs. 5 and 6) 1. Retrieve vinyl sleeve and spring from bag of parts and retrieve the auger control rod from carton chute tray. Slide straight rod end through the small hole in the vinyl sleeve. Hook spring in hole in rod end. 2. Hook end of spring into control arm with loop opening up as shown. [...]

ASSE BLY/PRE-OPERATION iNSTALL CHUTE DEFLECTOR REMOTE CONTROL (See Figs. 8 and 9) 1. Install remote cable bracket to discharge chute with 5/16-18 carriage bolt and 5/16-18 Iocknut as shown. Tighten securely. 2. Install remote cable eyelet to chute deflector with 1/4-20 shoulder bolt and 1/4-20 Iocknut as shown. Tighten nut securely. Cable eyelet wi[...]

PE KNOW YOUR SNOW THROWER READ THIS OWNER'S MANUALAND ALL SAFETY RULES BEFORE OPERATING YOUR SNOWTHROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your snow thrower or in literature supplied [...]

OPERATI DISCHARGE DEFLECTOR AUGER DRIVE CHUTE REMOTE GASOLINE CONTROL SPEED CONTROL CONTROL FILLER CAP LEVER CONTROL LEVER LEVER ELECTRIC LEVER MUFFLER START BUTTON CHUTE RECOIL DEFLECTOR TRACTION DRIVE CHOKE STARTER CONTROL CONTROL HANDLE LEVER PRIMER =H TURN TRIGGER SAFETY iGNiTiON KEY NOTE: iTEMS ABOVE ARE SHOWN IN THEIR TYPICAL LOCATION ON THE [...]

PE The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. HOW TO USE YOU[...]

OPERATION TO THROW SNOW (See Fig. 14) The auger rotation is controlled by the auger control lever located on the right side handle. • Squeeze auger control lever to handle to engage the auger and throw snow. • Release the auger control lever to stop throwing snow. AUGER CONTROL LEVER FIG. 14 USING THE CLEAN=OUT TOOL (See Fig. 15) In certain sno[...]

OPERATION LH TURN RH TURN TRIGGER TRIGGER FiG. 17 TO ADJUST SKID PLATES (See Fig. 18) NOTE: The wrench provided in your parts bag may be used to adjust the skid plates. Skid plates are located on each side of the auger housing and adjust the clearance between the scraper bar and the ground surface. Adjust skid plates evenly to proper height for cur[...]

OPERATION TO START ENGINE Your snow thrower engine is equipped with both a 120 Volt A.C. electric starter and a recoil starter. The electric starter is equipped with a three-wire power cord and plug and is designed to operate on 120 Volt A.C. household current. • Be sure your house is a 120 Volt A.C. three-wire grounded system. If you are uncerta[...]

E A CE MAINTENANCE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE Check for Loose Fasteners R Clean/Inspect Snow Thrower O W Check / Replace V=Belts RE Lubrication Chart v' v' v' v' Check Engine Oil Level E N Change Engine Oil Inspect Muffler N Check / Replace Spark Plug E Empty Fuel Tank v' v' GENERAL RECOMMENDATIONS T[...]

NTE A C E AUGER GEAR CASE The gear case was filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case. • If lubricant is required, use only Ronex ED #1 grease. TRACTION DRIVE SYSTEM DO NOT lubricate the drive components inside the snow thrower. The sproc[...]

SE ADJ ENTS WARNING: To avoid serious injury, before performing any service or adjustments: 1. Be sure the on/off switch is in the OFF position. 2. Remove safety ignition key. . Make sure the augers and all moving parts have completely stopped. 4. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. S[...]

SE ADJ TO REPLACE BELTS (See Fig. 22) 8. RELIEVE TENSION ON TRACTION DRIVE BELT The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a Sears service center/department. NOTE: It is recommended that both the auger and trac[...]

SE iCE ADJ ENTS TO REMOVE WHEELS (See Fig. 23) Remove the klik pin and remove wheel from axle. iMPORTANT: When installing wheel, be sure to use the axle hole closest to the end of the shaft - do not use the hole in the wheel hub (if equipped). Inner hole in axle and hole in wheel hub are not used for your model snow thrower. NOTE: To seal punctures[...]

STORAGE Immediately prepare your unit for storage at the end of the season or if the unit will not be used for 30 days or more. & WARNING: Never store the snow thrower with gasoline in the tank inside a building where fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance. AIIowthe engi[...]

TR L OTI See appropriate section in manual unless directed to a Sears service center/department. PROBLEM Does not start Loss of power Engine idles or runs roughly Excessive vibration Recoil starter is hard to pull Loss of traction drive / slowing of drive speed CAUSE Loss of snow discharge or slowing of snow discharge 1. Fuel shut-off valve (if so [...]

REPAIR PARTS SNOW THROWER - - MODEL NUMBER 944,529571 AUGER HOUSING / iMPELLER ASSEMBLY 5 11 6 11 17 9- _.i37 / / i ! . 22[...]

REPAIR PARTS SNOW THROWER - - MODEL NUMBER 944,529571 AUGER HOUSING /iMPELLER ASSEMBLY KEY PART NO. NO. DESCRiPTiON 1 175321X479 IMPELLER 2 427148 GEARBOX ASSEMBLY 3 188909 BEARING 4 427146 IMPELLER PULLEY 5 175322 DISCHARGE BASE 6 178675X008 CORNER BRACKET 7 192199 CLEAN OUT TOOL 8 405400 TOOL CLIP 9 73800400 NUT 1/4-20 10 74780426 SCREW 1/4-20 X [...]

REPAIR PARTS SNOW THROWER - - MODEL NUMBER 944,529571 AUGER HOUSING / iMPELLER ASSEMBLY (5x) _(5x) 01,07,002-A KEY PART NO. NO. 1 404929X615 2 404932X428 3 72270505 4 155377 DESCRIPTION AUGER HOUSING 27 SCRAPER BAR CARRIAGE BOLT 5/16-18 X .625 NUT 5/16-18 2 01.07.018-A KEY NO. 1 2 PART NO. 420495X479 420496X479 DESCRIPTION AUGER 27 LH AUGER 27 RH[...]

REPAIR PARTS SNOW THROWER - - MODEL NUMBER AUGER HOUSING /iMPELLER ASSEMBLY 944,529571 -3 2 01.11.001 -A KEY PART NO. NO. 1 174782X479 2 178777X479 3 72270508 4 751153 DESCRIPTION SKID PLATE LH SKID PLATE RH CARRIAGE BOLT 5/18-18 X .75 N UT 5/18-18 01.07.024-B 2 KE NO. NO. 1 420478 2 411939 3 179582 DESCRIPTION AUGER BEARING BEARING PLUG SCREW 5/16[...]

REPAIR PARTS SNOW THROWER -- MODEL NUMBER 944,529571 CONTROL PANEL / DISCHARGE CHUTE 13 14 KEY PART NO. NO. 1 420315X815 2 178833X815 3 420873 4 420325 5 414280 8 128415 7 17501010 *8 179829 *9 191730 "10 72250505 "11 751153 "12 184505 13 420879 14 420872 DESCRiPTiON CHUTE WELDMENT DEFLECTOR WELDMENT DEFLECTOR CONTROL ASSEMBLY DEFLEC[...]

REPAIR PARTS SNOW THROWER - - MODEL NUMBER CONTROL PANEL / DISCHARGE CHUTE 944,529571 KEY PART NO. NO. DESCRIPTION 1 428272 2 17501010 *3 420878 *4 405932 *5 420875 "8 428273 *7 428310 LEVER/CABLE ROTATOR ASSEMBLY SCREW 10-24 X .625 ROTATOR HEAD ROTATOR PIVOT BRACKET PULLEY PIVOT CABLE ASSEMBLY ADJUSTABLE CABLE ASSEMBLY HEAT SHIELD 01.09.010-B[...]

REPAIR PARTS HANDLES SNOW THROWER - - MODEL NUMBER 944,529571 KEY PART NO. NO. DESCRIPTION 1 419798X479 LOOP HANDLE LH 2 419799X479 LOOP HANDLE RH 3 74780524 SCREW 5/16-18 X 1.50 4 751153 NUT 5/16-18 01.08.004-B 01,08,007-B KEY PART NO. NO. DESCRIPTION 1 412675X004 INTERLOCK SPRING 2 414572 INTERLOCK CAM 3 178831 TORSION SPRING 4 169675 RETAINER 5 [...]

REPAIR PARTS HANDLES 3 01.08.002-F SNOW THROWER - - MODEL NUMBER 10 5_ 12 8 _12 14 944,529571 KEY PART NO. NO. DESCRIPTION 1 412683X479 CONTROL PANEL 2 424517X479 CONTROL LEVER LH 3 424516X479 CONTROL LEVER RH 4 426917X008 TRACTION ROD ARM 5 426918X008 IMPELLER ROD ARM 6 412677 INTERLOCK BAIL 7 421613 SPACER 8 169675 RETAINER 9 17060410 SCREW 1/4-2[...]

REPAIR PARTS HANDLES SNOW THROWER - - MODEL NUMBER 944,529571 lo/_' KEY PART NO. NO. DESCRIPTION 1 180480 2 405740 3 180445 4 187716 5 180447 6 178669 7 180926 8 72270505 9 155377 10 169675 IMPELLER ROD ASSEMBLY TRACTION ROD ASSEMBLY SHIFTER ROD TOP SHIFTER ROD BOTTOM SPRING SLEEVE IMPELLER SPRING TRACTION SPRING CARRIAGE BOLT 5/16-18 X .625 N[...]

REPAIR PARTS HANDLES SNOW THROWER - - MODEL NUMBER 944,529571 4 01.05.004-C 2 4 4 KEY PART NO. NO. DESCRIPTION 1 419797X479 LOWER TUBE 2 418313X479 PIVOT SUPPORT 3 428867 BOLT 5/16-18 X .750 4 17000616 SCREW 3/8-16 X 1.00 01.10.025-A KEY PART NO. NO. DESCRIPTION 1 429624 PANEL CONSOLE 2 178668 HEADLIGHT BEZEL 3 178666 HALOGEN HEADLIGHT 4 184471[...]

REPAIR PARTS DRIVE SNOW THROWER - - MODEL NUMBER 944,529571 ! / / / / / / 25 24 41 01.02.013-A 32[...]

REPAIR PARTS DRIVE SNOW THROWER - - MODEL NUMBER 944,529571 KEY PART NO. NO. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 198875 17501010 402685X615 17490508 57079 405485 198580 403097X004 402881 403096X004 191730 402856X004 416717X004 187101 700279 427542 402568 169675 401732 402310 12000036 402878 751153 408981 73930500 1981[...]

REPAIR PARTS DRIVE SNOW THROWER - - MODEL NUMBER 944,529571 01.03.002-A KEY PART NO. NO. DESCRIPTION 1 404923 AXLE ASSEMBLY (Assy of 1a,1 b) 1 a 404307 AXLE SHAFT lb 9465M1 ROLL PIN 3/16 X 1.50 2 402691 SPROCKET 3 174697 TH RUST WASH ER 4 179830 BEARING 5 146315 SCREW 5/16-18 X .625 6 17490508 SCREW 5/16-18 X .500 7 155443 KLIK PIN 1/4 X 1.50 8 189[...]

REPAIR PARTS CHASSIS / PULLEYS SNOW THROWER - - MODEL NUMBER 944,529571 01.01.007-A KEY PART NO. NO. 423185X815 DESCRIPTION ENGINE MOUNT PLATE 01.00.034-A KEY PART NO. NO. 1 418694X615 2 150406 3 428867 DESCRIPTION B&S ENGINE MODEL 20M314-1370-E2 FRAME BOLT 3/8-16 SCREW 5/16-18 X .750 NOTE: All component dimensions given in U.S. inches. 1 inch [...]

REPAIR PARTS CHASSIS / PULLEYS SNOW THROWER - - MODEL NUMBER 944,529571 01.21.013-B KEY PART NO. NO. DESCRIPTION 1 428684 COVER ASSEMBLY NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm iMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower a[...]

REPAIR PARTS CHASSIS / PULLEYS SNOW THROWER - - MODEL NUMBER 944,529571 -22 -14 20 12 9 18 17 16 5 01,21,003-B KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. 408007 419744 423723X479 180523 426589 74780524 423990X479 428867 424297 751153 187786 180522 KEY DESCRIPTION NO. IMPELLER BELT 13 TRACTION BELT 14 IDLER ARM BRACKET 15 IDLER PULLEY 16 NUT 5/16-1[...]

REPAIR PARTS WHEELS SNOW THROWER - - MODEL NUMBER 944,529571 2 4 12 _,-2 Ol. 15.OOl -A KEY PART NO. NO. 1 405161 2 184471 3 12000045 4 192126 5 182466 6 187622 7 194941 8 179139 9 189282 10 194940 11 174697 12 193506X479 KEY PART DESCRIPTION NO. NO. DESCRIPTION COVER 13 179148X479 STEERING BRACKET SHOULDER SCREW 14 17490508 SCREW 5/16-18 X .50 RETA[...]

REPAIR PARTS WHEELS SNOW THROWER - - MODEL NUMBER 944,529571 KEY PART NO. NO. 1 196752X417 2 196753X417 DESCRIPTION WHEEL ASSEMBLY LH WHEEL ASSEMBLY RH 01,06,006-A KEY PART NO. NO. 1 410293 2 410294 3 17060410 DESCRIPTION CABLE BRACKET LH CABLE BRACKET RH SCREW 1/4-20 X.625 NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPOR[...]

REPAIR PARTS BAG OF PARTS SNOW THROWER - - MODEL NUMBER 944,529571 01 14 003-B KEY PART NO. NO. DESCRIPTION 1 198563 2 169675 3 180684X008 4 184505 5 179829 6 191730 7 72250505 8 751153 9 73800600 10 19131316 11 192090 12 73800400 POWER CORD RETAINER PIN WRENCH REMOTE SPRING SHOULDER BOLT 1/4-20 LOCKNUT 1/4-20 CARRIAGE BOLT 5/16-18 X 5/8 LOCKNUT 5/[...]

REPAIR PARTS DECALS SNOW THROWER - - MODEL NUMBER 944,529571 1 4 it- ;_ 1 3 KEY PART NO. NO. 1 181037 3 181035 4 181042 - - 429914 - - 429915 DESCRiPTiON DECAL, DANGER DECAL, DANGER, DEFLECTOR DECAL, DANGER OWNER'S MANUAL, ENGLISH OWNER'S MANUAL, FRENCH NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm iMPORTANT: Use o[...]

BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 20M314-1370=E2 48 SHORT BLOCK 1351 307 #-&,, ?/ 306 i 725 1058 OPERATOR'S MANUAL I _j 1 1329 REPLACEMENT ENGINE I [ 161 146 741% 1330 REPAIR MANUAL ] 1427 _) 24._ 22 287 177 < 524 ____ 718A 529 1026 .......... : :::::: :: 45 (>-::::_ 51 12 _:]::111111111<1111111 _'9 .... 868[...]

BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 20M314-1370-E2 621 604A 1070 610 / 727 697 ._? 735 1119 632 #_.._ <-j 33_ _ 892 1252 930 188 1392 _ 326 1005 1251A 305 1230 1288 _# 828 ij' 1318 __@ 455 1352 884 _ 1196_ _ I 1036 EMISSIONS LABEL I 731 43[...]

BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 20M314-1370=E2 51A, J! 528 j!i 130 108 632 459 12 1211 127 _ 914 121 CARBURETOR OVERHAUL KIT lO4 lO5 127 ,7" 137 163 51A 633 @ 957 472 163 6Ol d_i_ 190 1095 VALVE GASKET SET 868 ,. ]_') 51A 883 281 663 _ @ 44[...]

BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 20M314-1370-E2 KEY PART KEY PART NO. NO. DESCRiPTiON NO. NO. DESCRIPTION 1 794849 Cylinder Assembly 122 694876 G Spacer-Carburetor 2 698340 Kit-Bushing!Seal (Magneto Side) 125 796122 Carburetor 3 391086s • Seal-Oil (Magneto Side) 127 690727 G Plug-Welch 5 794871 Head-Cylinder 130 696139 Valve-Thro[...]

BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 20M314-1370=E2 KEY PART NO. NO. DESCRIPTION 528 793006 529 791822 552 694674 562 793216 564 699854 597 691696 601 791850 604 696758 604A 790473 621 692310 632 695917 608 699335 610 794541 613 794846 613A 794844 614 691620 616 795758 633 690998 635 691909 663 699854 668 794539 668A 694257 689 691855 [...]

SERVICE NOTES 47[...]

iiiiiiiiiiiiiiiiii .............. i .... !!!!!!!!!!!!!!!!!!!!!!_ iiiiiiiiiiiiiiiiiiiiiii !!!!!!!!!!!!!!!!!!!!!!_ iiiiiiiiiiiiiiiiiiiiiii !!!!!!!!!!!!!!!!!!!!!!_ iiiiiiiiiiiiiiiiiiiiiii !!!!!!!!!!!!!!!!!!!!!!_ iiiiiiiiiiiiiiiiiiiiiii !!!!!!!!!!!!!!!!!!!!!!_ iiiiiiiiiiiiiiiiiiiiiii !!!!!!!!!!!!!!!!!!!!!!_ iiiiiiiiiiiiiiiiiiiiiii !!!!!!!!!!!!!!!!!!!!![...]