SMC Networks SMC TigerSwitch 10/100 SMC6128L2 manuel d'utilisation

T igerSwitch 10/100 24-P ort 10/100 Mbps F ast Ether net Managed Switch ◆ 24 auto-MDI/MDI-X 10/100B ASE-TX p orts ◆ 4 Gigab it RJ-45/ SFP combinati on ports ◆ Non-blocking switching architect ure ◆ Spanning T ree Protocol, and Rapid STP ◆ Up to 8 LA CP or stat ic trunks ◆ CoS support through four pri ority queu es ◆ Full su pport for [...]

[...]

20 M ason Irvi ne, CA 9 2618 Phone: (949) 67 9-8000 T igerSwitch 10/100 Installation Guide From S MC’ s T iger line of feature-r ich w orkgroup LAN solu tions March 200 7 Pub. # 15020 0060900A[...]

Infor mation fur nished b y SMC Networks , Inc . ( SMC) is believed to be accurate and reliable. Howev er, no responsibili ty is assume d b y SMC for its use, no r for any infrin ge ments of pate nts or oth er righ ts of third par t ies which may result from its use. No license is g ran ted by implication or ot h- erwi se und er an y pate nt or pat[...]

i L IMITED W ARRANTY Limited W ar ranty Statement: SM C Networks, Inc. (“SMC ”) war rant s its p roduct s to be free f rom defects in w orkmanship and materials , under nor mal use and ser vice, for the applicable w ar ranty ter m. All SMC products carr y a standard 90-da y limited warranty from the date of purchase from SMC or i ts Author ized[...]

L IM ITE D W AR RANTY ii WARRA NTI ES E X CLU SIVE : IF AN SMC PR ODUCT DOES N OT OPERA TE AS W ARRANTED A BO VE, CUSTOMER’ S SOLE REM ED Y SHALL BE REP AIR OR REPLA CEMENT OF THE PR OD UCT IN Q UESTION , A T SMC’S OPTION . THE FOREGOING W ARRANTIES AND REMEDIES ARE EXCL USIVE AND ARE IN LIEU OF ALL OTHER W ARRANTIES OR CONDITIONS , EXPRESS OR [...]

iii C OMPLIANCES FCC - Cla ss A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the F CC Rules . These limits are designe d to provide r easonable protection against har mfu l interfe rence when the equipment is operated in a commercial envi ronment. This equipment generates , [...]

C OMPLIANCES iv CE Mark D ecla rat io n of C onfor man ce fo r EMI a nd S afe ty (EEC) SMC contact for these product s in Europe i s: SMC Netw orks Europe, Edi fic io Cona ta II, Calle Fru ctuós G elaber t 6-8 , 2 o , 4 a , 08970 - Sant J oan Despí, Barcelona, Spain. This inform ation te chnolog y equipment compl ies with the r equirements of the[...]

C OMPLIANCES v Safety Compliance W a rn i n g : F i b e r O p t i c P o rt S a f e t y A v er tissment: P o r ts pour fibres optiques - sécuri té sur le plan op t ique W ar nhinw eis: F asero ptikanschlüs se - Optische Sicherheit P ower Cord Safet y P lease re ad the fo llo win g saf ety inf ormati on c are full y be for e i nsta llin g th e s w[...]

C OMPLIANCES vi Impor tant! Before mak ing connect ions, make sure you have the cor rect cord set. Check it ( read the label on the cabl e) ag ains t the foll owing: V euillez lire à fond l'infor m ation de la s écurité sui v ante av ant d'inst aller le Switch: A VERTISSEMENT: L’instal lati on et la dé pose de c e gr oupe doivent ê[...]

C OMPLIANCES vii F rance e t Pér ou uni queme nt : Ce g roupe ne pe ut pas êtr e al imenté par un dispo sit if à impé dance à l a ter r e. Si vos alimen tati ons son t du type i mpédance à la ter re, ce gro upe doit être al imenté pa r une tensi on de 23 0 V (2 P+T) par le biais d’un trans for ma teur d’is olement à rappor t 1: 1, av[...]

C OMPLIANCES viii W ar nin gs and Caut ionar y M essa ges Wa r n i n g s (in Ger man ) Stromkabel. Dies muss vo n dem Land , in dem es benutzt wird geprüft werden: Schweiz Diese r Stromstecke r m uß die SEV/AS E 1011Bes timmungen einhalten. Europe Das N etzkabel muß vom Typ HO3VVF 3GO.75 (Min destanfo rderu ng) sein un d die Aufs chrift <HAR&[...]

C OMPLIANCES ix En vironm ental Statement The manufacturer of this product endea vours to sustain an en vironmentally-friendly pol icy throughout the entire production pr ocess . This is ac hieved t hough the foll owing means: • Adherence to national l egislation and regulati ons on environmental production standards. • Conservation of oper ati[...]

C OMPLIANCES x[...]

xi T ABLE OF C ONTENTS 1 About the TigerSwitch . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Switch Architec ture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Networ k Manageme nt Option s . . . . . .[...]

T ABLE OF C ONTENTS xii Connec ting to a Pow er Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 Connec ting to t he Console P ort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 Wiring Ma p for Serial Cab le . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 4 Making Network Connections . . . [...]

T ABLE OF C ONTENTS xiii Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3 Complianc es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C -3 D Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . D-1 E German Instructions [...]

T ABLE OF C ONTENTS xiv[...]

xv T ABLES Table 1-1 Port Statu s LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Table 1-2 System Sta tus LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Table 3-1 Serial Ca ble Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 Table 4-1 Maximum 1000BASE-T Gig abit Ethernet[...]

xvi[...]

xvii F IGUR ES Figur e 1-1 Front a nd Rear Pa nels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Figur e 1-2 Port LE Ds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Figur e 1-3 Syst em LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Figure 1-4 Power Supply Socket . . . . [...]

F IGU RES xviii[...]

1-1 C HAPTER 1 A BOUT THE T IGER S WITCH Overvi ew Th e SMC6128L2 is a F ast Ether net switch with 24 10/100BASE-TX ports an d fo ur Gi gabit comb ina tion p orts 1 that are comp rised of an RJ-45 port and a n SFP transce iv er slot. The switc h also include s an SNMP-based man ag e ment agent embedd ed on the main boar d. This agent supports both [...]

A BOUT THE T IGE R S WITCH 1-2 Switch Architecture Th e SMC6128L2 switc h em plo ys a wire-speed, non-blocking switching fabric. This per mits simultane ous wire-speed transpor t of multiple pack ets at low latency on all por ts . T he switch also features full-du plex capability on a ll ports , whic h eff ectiv ely doubl es th e band width of each[...]

D ESCRIPTION OF H ARD WA R E 1-3 Each of these po rt s suppor t auto-n eg otia tion, so th e opt imum transmission mode (half or full duplex), and data ra te (10 or 100 Mbps) can be sele cted autom atically . If a device connec ted to one of th ese ports does not support aut o-n eg oti ation , the c omm unic ation mode of th at port can be conf igu[...]

A BOUT THE T IGE R S WITCH 1-4 Figure 1-3 System LEDs Table 1- 1 Por t Status LEDs LED Condition Status RJ-45 Ports Link/ACT (Link/ Activity) On/ Blinki ng Green The p ort has established a v alid 100 Mbps l ink. Blinking i ndicates activity. On/ Blinki ng Amber The p ort has es tablished a valid 10 Mbps link. Blinking i ndicates activity. Off Ther[...]

D ESCRIPTION OF H ARD WA R E 1-5 Power Supply Socket There is on e stand ard po we r soc ket on the rear panel fo r the A C po wer cord . Figure 1-4 Power S upply Socket Table 1-2 System Stat us LEDs LED Condition St atus PWR (Power) On Green The unit’s interna l p ower supply is operating normally. On Amber The unit’ s internal power supply ha[...]

A BOUT THE T IGE R S WITCH 1-6 Feat ures an d Bene fits Connectivity • 24 10/ 100BASE -TX ports plus four Gigabit combination ports (RJ-45/SFP). • Auto-n egotiati on enables ea ch RJ-45 po rt to a utomatical ly selec t the optimum speed (10 or 100 Mbps), and the communication mode (half or fu ll duplex) if this featur e is supp orted by the a t[...]

F EATURES AND B ENEFITS 1-7 • Support s wire-sp eed filtering an d forward ing • Sup por ts flow cont rol, us ing bac k pres sure f or half du plex and IE EE 802.3x for full duplex • Br oad cast storm cont rol Management • “At-a-g lance” LE Ds for ea sy tr oublesho oting • Network manageme nt agent: - Manages switch in-band or o ut-of[...]

A BOUT THE T IGE R S WITCH 1-8[...]

2-1 C HAPTER 2 N ETWORK P LANNING Introd ucti on to Switchi ng A network swit c h allows simultaneous transmis sion of multiple packe ts via non-cr ossbar switching . Th is means that it can p artit ion a netw ork more effi ciently than br idges or r outers . The sw itch h as , the refore , been recog nized as o ne of th e most impor tan t building[...]

N ETWORK P LANNING 2-2 Applicat ion Examples Th e SMC6128L2 switch is n ot only designed to segment your netwo rk, but also to pr ovi de a wid e range of opti ons i n sett ing up netw ork con nect ions . Some typi cal application s are described below . Collapsed Backbone Th e SMC 612 8L2 sw itch is an excelle nt choice for Et her n et, Fast Ethe r[...]

A PPL ICA TIO N E XAM PL ES 2-3 Network Aggregation P lan With 28 parallel brid ging por ts (i.e., 28 distinct collisio n domains) , the SMC6128L2 switch can co llapse a complex netw ork down in to a single effi cient b ridged no de , incre asing ov erall ban dwidt h and th rough put. In the figure belo w , the 10/100B ASE-TX por ts are providing 1[...]

N ETWORK P LANNING 2-4 Remote Connections with Fiber Cable Fiber optic t echnolo g y a llows for lo ng er ca bling than any other media type. A 1000B ASE-SX (MMF) link can connect to a si te up to 550 meters awa y , a 1000B A SE-LX (SMF) link up to 5 km, and a 1000B A SE-ZX link up to 100 km. Th is allows the S witch to ser v e as a collapsed backb[...]

A PPL ICA TIO N E XAM PL ES 2-5 Making VL AN Co nnections This s witc h s upports VL ANs whic h can b e use d to organize a ny g roup of network no des into se parate broad cast do mains . VLANs confin e broad cast traffic to the or iginating g roup , and ca n elim inate br oadcast stor ms in la rge networks . Thi s provide s a mor e secur e and cl[...]

N ETWORK P LANNING 2-6 Applic ation N otes 1. Full-duplex operatio n only applies t o point-to-po int access (such as when a switch is at tached t o a w o rkstation, ser ver o r another switch). When the switc h is con nected t o a hu b , both devices m ust opera te in half-duplex mo de . 2. A void using f low con trol on a po rt c onnec ted to a h[...]

3-1 C HAPTER 3 I NSTALLI NG THE S WITC H Selecting a Site Switch units ca n be mo unted in a standard 19-inch equipme nt rack or on a flat s urface . Be sure to follow th e guidelines below when choosin g a locatio n. •T h e s i t e s h o u l d : - be at t he cent er of all th e devices yo u want to link and near a powe r outlet. - be able to mai[...]

I NS TA LLI NG THE S WITCH 3-2 Ethe rnet Cabling T o ensure prope r operation wh en installing the sw itch into a netw ork, mak e sure t hat the current cables are s uitable fo r 10B ASE-T , 100B ASE-TX or 1000B ASE-T operation. Check the follo wing criteria agains t th e current insta llatio n of y our ne tw ork: • Cable ty pe: Unshield ed twist[...]

E QUIPMEN T C HECKLIST 3-3 Equi pmen t Chec klis t After u npac king th is swit ch, chec k the co ntents to be sure yo u ha v e recei ved all the c ompon ents . Then, before begin ning th e inst allat ion, be sure you ha ve all oth er nece ssar y in stallat ion eq uipment. Package Contents • Tig erSwitch 10/100, SMC6128L2 • F our ad hes ive fo [...]

I NS TA LLI NG THE S WITCH 3-4 Mount ing This s witc h can be mounted i n a st andard 1 9-inc h eq uipment rack or on a desk top o r shel f. M ounti ng inst r uctio ns for e ach type of sit e fol low . Rack Mounting Bef ore rack mou nti ng t he swi tch, p ay p articular att ention to the fol lowing factors : • Temp erature: Since the temperatur e[...]

M OUNTING 3-5 T o ra c k-m ount de vices : 1. At tach t he brac ke ts to the d evice usin g the s crews pr ovide d in th e Bracket Mount ing Kit. Figure 3-2 Attaching the Brackets 2. Mount th e device in the rack, using fo ur rack-mounting s crews (not provide d). Figure 3-3 Installi ng the Switch in a Rack[...]

I NS TA LLI NG THE S WITCH 3-6 3. If installing a sin gle switch only , turn to “ Connecting t o a P ow er Sou rce” a t the end o f this chapter. 4. If installing multip le switches , mount them in the rac k, one be lo w th e othe r , in any order . Desktop or Sh elf Mounting 1. Atta c h the four adhes iv e feet to th e bottom of the first s wi[...]

I NS TA LLI NG AN O PT IONA L SFP T RANS CEI VER 3-7 Inst alling an Optional SFP Transcei ver Figure 3-5 Instal ling an SFP Transceiver into a Slot The SFP s lots support th e fol low ing opt ional SFP t rans ceiv ers: • 1000BASE-SX • 1000BASE-LX • 1000BASE-ZX T o install an SFP transceiv er, do the follo wing : 1. Co nside r netw ork an d ca[...]

I NS TA LLI NG THE S WITCH 3-8 Connect ing to a Power Sourc e T o co nnect a switc h to a po wer sou rce: 1. Ins er t th e pow er cable plu g direc tly into t he po wer s ock et loc ated at the b ack of th e swit ch. Figure 3-6 Power Socket 2. Plug the ot her e nd of th e cabl e into a g roun ded, 3 -pin, A C po wer sour ce. Note: For Inte rnati on[...]

C ONNECTING TO THE C ONSOLE P ORT 3-9 Conne cting to the Consol e Port The DB-9 seria l port on the swi tch’ s rear pan el is us ed to conn ect to th e switc h fo r out-of-ba nd con sole con figurat ion. The comm and-line-dr i ven config urati on prog r am can b e acces sed from a ter m inal or a PC r unning a ter minal e mulatio n prog ra m. Th [...]

I NS TA LLI NG THE S WITCH 3-10[...]

4-1 C HAPTER 4 M AKING N ETWORK C ONNECTI ONS Conne ctin g Netwo rk Device s The SMC6128L2 switch is designed to interconnect multiple segments (or collision do mains). It can be connected to network cards in PCs and ser v ers, as wel l as to hubs , s witc hes or rout ers . It m ay also be conn ected to remote devices u sing the o ption al SFP tra [...]

M AKI NG N ETWORK C ONNECTIONS 4-2 Connecting t o PCs, Servers, Hubs and Switches 1. Att ach one e nd of a twiste d-pa ir cab le s egme nt to th e dev ice’ s RJ-45 conn ector. Figure 4-1 Making Twisted-Pair Connections 2. If t he device is a ne tw ork car d and the s witc h is in t he wirin g closet , attach t he ot her end of th e cab le se gmen[...]

T WISTED -P AI R D EV ICE S 4-3 Network Wiring Connections T oda y , the p unc h-do wn bloc k is an in tegral part of m any of t he new er equip ment ra c k s . It is actua lly par t of the patch pa nel. In str uc tions f or making conn ect ions in th e wiri ng close t with this ty pe of eq uip ment follows . 1. Att ach one e nd o f a patch c able [...]

M AKI NG N ETWORK C ONNECTIONS 4-4 Fiber Optic SFP Devices An optional Gig abit SFP transcei v er (1000BASE-SX, 1000B ASE -LX, or 1000B ASE-ZX) can be u sed for a backbone connectio n between switches , or for conn ecti ng to a hig h-spe ed se r ver . Each single-m ode fiber port requires 9/125 micro n sin gle-mode fib er opti c cable wit h an LC c[...]

F IBER O PT IC SFP D EV ICE S 4-5 2. Chec k that the fiber ter minator s are cl ean. Y ou can clean the cable plugs b y wip ing the m g ently wit h a clean t issue or cott on ball moiste ned wit h a little e thanol. D irty fiber ter minat ors on fibe r optic cables will impair the quality of the ligh t transmitte d through the cable and le ad to de[...]

M AKI NG N ETWORK C ONNECTIONS 4-6 Connect ivity Ru les Wh en addi ng hubs (re peat ers) to your network, p leas e follow the con necti vity rules listed in th e man uals for these p roducts . How ever , note that beca us e switch es br eak u p the path for co nnec ted devi ces i nto separate collisio n domains , you sh ould not include th e switch[...]

C ONNEC TI VITY R ULES 4-7 100 Mbps Fast Ether net Collision Domain Table 4-2 Maximum 1000BASE-SX Gigabit Etherne t Cable Lengths Fiber Size Fiber Band width Maxim um Cable Lengt h Connector 62.5/125 micron multimode fiber 160 MHz/km 2-2 20 m (7-722 ft) LC 200 MHz/km 2-2 75 m (7-902 ft) LC 50/125 mic ron multimode fiber 400 MHz/km 2-5 00 m (7-1641 [...]

M AKI NG N ETWORK C ONNECTIONS 4-8 10 Mbps Ethern et Collision Domain Cable L abeling and Con nectio n Records Whe n planning a netw or k installation, it is esse ntial to label the opp osing ends of cable s and to record where each cable is connec ted. Doing so will enabl e you t o easil y locate in ter -connec ted de vices , is olate faul ts and [...]

A-1 A PPENDI X A T ROUBLESHOOTING Diagnosi ng Switch Ind icators Table A-1 Troubl eshooting Chart Symptom A ction PWR LED is Off • Power supply is disc onnected. • Chec k connections b etween the switc h, the power cord and the wall outlet. • Contact your deal er for assistan ce. PWR LED is Amber • Interna l power supply h as faile d. Conta[...]

T R OUBLESHOOTING A-2 Power Supply Prob lems If the power ind icato r does not tu r n on whe n the power cor d is plug g ed in, y ou ma y ha ve a prob lem with the po wer ou tlet, pow er cord, or internal power supply . Howev e r , if the unit pow ers o ff after r unning for a while, check for lo ose p ow er conn ecti ons, po wer lo sses or sur ge [...]

B-1 A PPEND IX B C ABLES Twi sted-Pai r Cable and Pin Assi gnments F or 10/10 0B A SE-TX co nnect ions , t he twiste d-pair cabl e must have tw o pairs of wires . F or 1000B ASE-T connections the twist ed-pair cab le must hav e f our pairs of wires . Each wi re pair is ide ntified by two different colors . F or exa mpl e, one w ire mi ght be g r ee[...]

C AB LES B-2 10BASE-T/100BASE-TX Pin A ssignments Use unshield ed twisted-pair (UTP) or shielded t wisted-pair (STP) c able for RJ-45 connections: 100-ohm Categ or y 3 or better cable for 10 Mbps connectio ns, or 100-ohm Categ or y 5 or be tter cable for 100 Mbps con nectio ns . Also be sure t hat th e length of any twis ted-pair conn ection does n[...]

T WISTED -P AI R C AB LE AND P IN A SSIGNMENTS B-3 Straight-Thr ough Wiring If the twis ted-pair cable is to join two por ts and on ly one of the por ts h as an inter nal crossover (MDI-X ), the two pairs of wi res must be st raight- throu gh. (Whe n au to-ne gotia tion is enab led f or any RJ-45 po rt on this switch , you can use eit her str aight[...]

C AB LES B-4 Figure B-3 Cr ossover Wi ring 1000BASE-T Pin As signments All 1000B ASE-T ports sup port automatic MDI/M DI-X operation, so you can use st raight -thr ough cables f or all netw ork conn ections to PCs or ser v ers , or to other s witc hes or hubs . The table below shows the 1000B ASE-T MD I and MDI-X port pinouts . Th ese por ts re qui[...]

T WISTED -P AI R C AB LE AND P IN A SSIGNMENTS B-5 1000BA SE-T Cable Requirem ents All Categ or y 5 UTP cab les that are used for 100B ASE-TX connections should also w ork for 1000B ASE-T , pro viding that all four wire pairs are conne cted. Howev er , it is recommend ed that for all c ritical conne ctions , or any new cable in stallat ions , Categ[...]

C AB LES B-6 Note that whe n testing your cable installatio n, be sure to include all patch cabl es betw een swi tch es and en d device s . Adjusting Exi sting Category 5 Cabling to Run 1000B ASE-T If y our existing Categor y 5 inst allatio n does not me et one o f the te st parameters for 1000B ASE-T , there ar e basically three measures that can [...]

C-1 A PPENDI X C S PECIFI CATIO NS Physical Chara cteristics Po r t s 24 10/100B ASE-TX, wit h auto-nego tiation 4 Combination Gi g abit P or ts ( RJ-45/SFP) Network Interface P or ts 1-24: RJ-45 connector , auto MDI/X 10B ASE-T : RJ-45 (10 0-ohm, UTP cable; Ca teg or y 3 or better) 100B ASE-TX: RJ-45 (100-ohm , UTP cable; Categ or y 5 or better) P[...]

S PE CIFIC ATION S C-2 Size 44 x 17.1 x 4.3 cm (17.3 x 6.7 x 1.7 in.) Te m p e r a t u r e Operating: 0 °C to 40 °C (32 °F to 104 °F) Storage: -40 °C to 70 °C (-40 °F to 158 °F) Humidity Operating: 10% to 90% (non-co ndensing) P ow er Supply Intern al, auto-ranging transfor mer : 100 to 240 V A C , 50 to 60 Hz, 0.8 A P ower Consumption 30 W[...]

M ANAG EMENT F EAT UR E S C-3 Manage ment Feat ures In-Band Managem ent W eb , T elnet, SSH, or SNMP manager Out-of-Band Mana gement RS-232 DB-9 console port Software Load ing TFTP i n-ban d, or XM odem out -of-b and Standards IEEE 802.3- 2005 Eth er net, F ast Ether n et, Gig abit Ethe rn et Full-d uplex f low control IEEE 802.1D Spanning T ree Pr[...]

S PE CIFIC ATION S C-4 Immunity EN 61000-4-2/3/4/5/6/8/11 Safety CSA (CSA 22.2 NO60950-1) CB (IEC 60950-1) Wa r r a n t y Limite d Lifetime[...]

D-1 A PPEND IX D O RDERING I NFORMATION Table D-1 TigerSwitch 1 0/100 Products and Accessories Product Numb er Description SMC6128L2 24 10/100BASE-TX po rts plus 2 Gigabit combinat ion ports (RJ-4 5/SFP) and 2 Gigab it 1000BASE-T ports SMC1GSFP-SX 1-port 1000BASE-SX Small Form Pluggable (SFP) mini-GBI C transceiver SMC1GSFP-LX 1-port 1000BASE-LX Sm[...]

O RDER ING I NFOR MATION D-2[...]

E-1 A PPENDI X E G ERMAN I NSTRUC TION S Eine Site Ausw ählen (Selecting a Site) Die Switch können in ein Standard-19-Z oll-A usr üstungsg estell ode r auf eine flac he Eben e montiert w erden. Zum Ausw ähle n ein es St andor tes b eacht en S ie bitte die n ach steh enden Richtlinie n. • Die Site sollte : - Sich in der Mitte aller anzusc hlie[...]

G ER MAN I NSTRUCTI ONS E-2 • Si che rste lle n, dass d as Ge rät an ei ne s epar ate Stro mqu ell e mit Erdanschlus mit einer Netzspannung von 100 bis 240 V AC (Wec hsels tromsp annun g), 50 bi s 60 Hz, und inne rhalb i n einem A bstand von 2,44 m (8 Fus) zu jede m Gerät installiert wird und on eine m separat en Trenns chalte r bzw. Leist ungs[...]

A NS CHL US S AN EINE S TR OMQUELL E (C ONNECTING TO A P OWER S OURCE ) E-3 So monti ere n Sie Ge räte an e in Rack: 1. Befestig en Sie die Metallwinkel mit den im Me tallwinkel-Montag eset erhä ltlichen Schra uben an d em Gerä t. 2. Be fes tig en S ie da s Gerät mit v ier R ackmont ag eschr au ben (ni cht beig elegt ) a n dem Rack. 3. W enn Si[...]

G ER MAN I NSTRUCTI ONS E-4 Hinweis: Im Ausland m üssen Sie eventu ell ein anderes N etzkabe l verwen den. Wäh len Sie d azu ein zugelas senes, für die Steckdose n des jeweiligen Landes passe ndes Netzkabe l. 3. Überz eugen Sie sich dav on, dass das Gerät mit Strom v e rso rgt wird: Die Betrieb-L ED („P ower“) an der V orderse ite muss leu[...]

Glossary-1 G LO SSARY 10BASE-T IEEE 802.3 specification for 10 Mbps Ether net ov er tw o pairs of Categ or y 3, 4, or 5 UTP cable . 100BASE-TX IEEE 802.3u specification for 100 Mbps Ethern et o ver tw o pairs of Categor y 5 UTP ca ble. 1000BASE-LX IEEE 802.3z specification for Gig abit Ether net ov er two strands of 50/ 125, 62.5/125 or 9/125 micro[...]

Glossary-2 Bandwidth The differ ence b etwee n the h ighes t and low est frequenc ies a va ilabl e for network sign als . Also synony mous w ith wire spee d, the ac tual s peed of the da ta tr ansm issi on alo ng t he cab le . Coll isio n A co nditio n in whic h pack ets transm itted o v er the cab le int erfere with each other . Their interference[...]

Glossary-3 Full Duplex T ransmi ssion meth od tha t allows two netw ork d evices t o transm it and recei v e con cur rent ly , effecti vel y doubl ing the band width of th at link. Gigabit Ethernet A 1000 Mbps network c ommunication system based on Ethern et a nd the CSMA/CD access method. IEEE Inst itute of Electri cal and Electr onic Engineer s .[...]

Glossary-4 LED Light emittin g diod e used for mon itorin g a dev ice or network cond ition. Local Area Network (LAN ) A group of i nterc onnected comput er and sup por t d evices . Media Access Control (MAC ) A p ort io n of t he ne tw ork ing pr otoc ol th at g o ve r n s access to the transmission medium, facilitating th e ex chang e of data bet[...]

Glossary-5 TIA T e lecommunications In dustr y Assoc iation Transmission Control Protocol/Internet Protocol (TCP/ IP) Proto col su ite t hat inc ludes TC P as t he prima r y tra nspor t protoc ol, an d IP as t he netw ork layer prot ocol . UTP Unshielded tw isted-pair cable. Virtua l LAN (VLA N) A Vi r tual L AN is a co llecti on of netw ork node s[...]

Glossary-6[...]

Index-1 Numeri cs 10 Mbps conne ctivity rules 4-8 100 Mbps conn ectivity rules 4-7 1000 Mbps conn ectivity rules 4-6 1000BASE-LX fiber cab le lengths 4-7 1000BASE-SX fiber cab le lengths 4- 7 100BASE cable leng ths 4-7 100BASE-TX p orts 1-2 , 1-3 10BASE cabl e lengths 4-8 10BASE-T ports 1-2 , 1-3 A access ories, orderin g D-1 adhesi ve feet, attach[...]

I ND EX Index-2 indicators , LED 1-3 installatio n connecting devices to the switch 4-2 desktop or she lf mountin g 3-6 network wiring conn ections 4-3 port connect ions 4-1 , 4-4 power requirements 3-1 problems A-2 site requirements 3-1 , E-1 wiring c losest connections 4-3 L laser safe ty 4-4 LC port connections 4-4 LED indicators Diag 1-5 Power [...]

I NDEX Index-3 IEEE C- 3 status L EDs 1- 3 switch a rchitecture 1- 2 switching introduc tion to 2-1 method 1 -2 T Telnet A-2 temperature within a rack 3-4 TigerSwitch 10/1 00 Products and Accessories D-1 trouble shooting in-ba nd acces s A-2 switch ind icators A-1 twisted- pair connections 4- 1 V VLANs, ta gging 2 -5 W Web-b ased m anagemen t 1 -2[...]

I ND EX Index-4[...]

[...]

20 Mason Irvi ne, CA 92 618 Phone : (949) 679-8 000 Mode l Numb er: SMC6128 L2 Publ ication Num ber: 15020 006090 0A E0320 07-CS-R01 FOR TECHNICAL SUPPOR T , CALL: From U. S.A. and Cana da (24 hou rs a day , 7 days a week) (800) SMC- 4-Y OU ; Phn: (949) 679- 8000; Fax: (949) 679-1481 From Europ e: Contact det ails can be found on www .smc.co m INTE[...]