Sony 1500A manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 125 pages
- 2.01 mb
Aller à la page of
Les manuels d’utilisation similaires
-
VCR
Sony SVT-168E
172 pages 2.59 mb -
VCR
Sony MSW-A2000
28 pages 0.14 mb -
VCR
Sony SLV-SE300D1/D2
92 pages 1.33 mb -
VCR
Sony SLV-ED88ME, SLV-ED66ME
60 pages 0.9 mb -
VCR
Sony CS SLV-998HF MX
42 pages 0.35 mb -
VCR
Sony MSW-M2000P
28 pages 0.14 mb -
VCR
Sony TRV345E
364 pages 9.33 mb -
VCR
Sony SLV-SE400K
72 pages 1.06 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Sony 1500A. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Sony 1500A ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Sony 1500A décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Sony 1500A devrait contenir:
- informations sur les caractéristiques techniques du dispositif Sony 1500A
- nom du fabricant et année de fabrication Sony 1500A
- instructions d'utilisation, de réglage et d’entretien de l'équipement Sony 1500A
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Sony 1500A ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Sony 1500A et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Sony en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Sony 1500A, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Sony 1500A, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Sony 1500A. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
DSR-1500A/1500AP © 2002 Sony Corporation 3-619-326- 11 (1) Digital Videocassette Recorder Operating Instructions Before operati ng the unit, please read this manual thoroughl y and reta in it for fu ture referen ce. Note The supp lied CD-R OM inclu des opera tion manu als for the DSR-15 00A/1500AP Dig ital Video Cas sette Recorde r (English , Japa[...]
-
Page 2
2 Owne r’ s Recor d The m odel and se rial numbers are located at the bottom . Record these numbers in the spac es provided below . Refer to them w henever y ou call upon your Sony de aler regarding this product. Mo del No. Serial No. T o pre vent fire or shoc k hazar d, do not expose the unit to rain or moisture . T o a v oid electrical shoc k, [...]
-
Page 3
3 • Read these instructions. • Keep these instructions. • Heed all warning s. • Follow all instructions. • Do n ot use this apparatus near w ater. • Clean o nly with dry cloth. • Do n ot block any ventilation openings. Install in accordance w ith the man ufacturer’s instructions. • Do n ot install near any heat sources such as ra [...]
-
Page 4
4[...]
-
Page 5
5 Table of Contents Table of Contents Chapter 1 Ove rview Features ......... .............. .............. .............. .............. ....... 7 DVCAM Format ............................................................. 7 Variety of Interfaces ........................................................ 8 Compact Size ................................[...]
-
Page 6
6 Tabl e o f Cont ent s Digitally Dubbing Signals i n DVCAM/DV Format .... 57 Chapter 4 Menu Settings Menu Organization .......... .............. .............. .............. 61 Menu Contents ................. ................... .............. ......... 64 Setup Menu ................................................................... 64 Auto Mode[...]
-
Page 7
7 Feat ur es Chapter 1 Overview Features The D SR-150 0A/1500AP is a 1 / 4 -inch digital videocassette recorder u sing the DV CAM ™ digital recording form at. The un it is equipped with an i.LINK /DV * interface as standard, so that it can be used as a low-cost, com pact feeder, player or viewe r in a non-linear editing system** without requiring[...]
-
Page 8
8 Feat ur es Chapter 1 Overvi ew Not e W hen playing back a tape recorded in D VCPR O (25 Mb ps) format, the ou tputs in SDTI form at of this unit are muted. Fu rthermore, it is not possible to playba ck the cue- audio track of the tape. Suppor t f or three cassette sizes There are two sizes of D VCA M cassette: standard and mini. Y ou can use eith[...]
-
Page 9
9 Feat ur es Chapter 1 Overvi ew at any speed in the rang e 0 (still ) to 60 times norm al speed in both directions. You can also search fram e-by-frame in jog mo de. At search sp eeds up to 10 tim es norm al speed in both directions, you can also hea r playback audio. Quic k mechanical response W hen you use the tape transport buttons of the un it[...]
-
Page 10
10 Feat ur es Chapter 1 Overvi ew The an alog video signals that can b e input are as follows. • Com posite video signals • S-video signals • Com ponent video signals (Y, R − Y a nd B − Y)[...]
-
Page 11
11 Using the CD-RO M M anual Chapter 1 Overvi ew Using the CD-ROM Manual The sup plied CD -RO M include s operation ma nuals for the DSR -1500A /1500AP Digital Video C assette Recorder (English, Japanese, F rench, German , It alian and S panish versions). CD-R OM System Requirem ents The follow ing are required to acce ss the supplied C DRO M disc.[...]
-
Page 12
12 Location and Functi on of Parts Chapter 1 Overvi ew Location and Functio n of Parts Fr ont P anel POWER PHONES REW PLA Y F FWD STOP EJECT LOCAL REMOTE REC/PB LEVEL PRESET SYNC MENU RESET(NO) TC PRESET SET(YES) CONTROL S REC MONITOR SELECT INPUT SELECT METER CH-1/2 3/4 SDTI/i.LINK VIDEO CH1 1/2 CH2 3/4 COUNTER SELECT VAR REC PB SC 1 3 2 4 INPUT V[...]
-
Page 13
13 Locatio n and F uncti on of Part s Chapter 1 Overvi ew a a a a POWER swi t ch Press the “ ” side to po wer on the unit. This cau ses the audio level m eters and the display section to light. To powe r off t he unit, press the “ ” side of the sw itch. b b b b Au dio level meters These tw o meters indicate the rec ording audio levels durin[...]
-
Page 14
14 Location and Functi on of Parts Chapter 1 Overvi ew W hen C H-3 /4 mod e is selected w ith the M ET ER CH -1/ 2 3/4 bu tton: j j j j M ETE R CH-1 /2 3/4 button Pressing this button toggles the audio level meter m ode bet we en CH- 1/ 2 ( chan ne ls 1 and 2) a nd CH- 3/ 4 ( cha nne l s 3 and 4). The settings m ade w ith this button and the M ON I[...]
-
Page 15
15 Locatio n and F uncti on of Part s Chapter 1 Overvi ew B Video/audio input setting section a a a a SD TI/i.LIN K (S DT I (QSD I) interface /i. LI NK selection) button Each p ress of this button cycles through the following input signal selection options. • Digital video signal in SD TI (QS DI) fo rmat input to the SDI/S DT I (QSD I) IN connec [...]
-
Page 16
16 Location and Functi on of Parts Chapter 1 Overvi ew is possible to adjust the audio levels on the tw o channels separately. You can switch the au dio recording m ode with the R EC MODE men u i t e m (see page 7 1) . The selection is indicated by the R EC M OD E d i splay on the front panel.[...]
-
Page 17
17 Locatio n and F uncti on of Part s Chapter 1 Overvi ew C Display sectio n a a a a INP UT sign al display section Indicates the input video and audio signal formats selected wit h t he INP UT S ELECT bu tt on s (S DTI /i . LI NK, VI DEO, CH 1 1/2, and CH 2 3/4 buttons). Not e The indicators w ithout the corresponding optional boards in sta lled i[...]
-
Page 18
18 Location and Functi on of Parts Chapter 1 Overvi ew VIDE O in di ca to rs : The indicator (C OM POSIT E, S VIDE O, Y − R,B, SDI, or S G) correspon ding to the selected input video signal format lights. AUDIO in di cat o rs : C ompri se th e CH -1 1/ 2 in di cat or an d CH -2 3/4 indicator, under each of which there are four mor e i ndi c at o [...]
-
Page 19
19 Locatio n and F uncti on of Part s Chapter 1 Overvi ew AUDIO i ndi c at or s : Comp rise the CH 1/2 indicator and CH 3/4 indicator to indicate the chan nel selecti on for analog au dio output from the A UD IO OU T 1/3 and AUDIO OU T 2/ 4 c onnectors. You c an ch an ge th e c ha nn el s el ec t io n wi t h th e AUDI O OUTPUT men u i t em (see pag[...]
-
Page 20
20 Location and Functi on of Parts Chapter 1 Overvi ew 32K indicator: Lights du ring playback of a tape record ed in 4-c han nel mode (3 2 kHz) . o o o o RE C M O DE (audio recording m ode) d isplay This indicates the audio record ing mode cu rrently selected wit h t he REC MODE men u i t em (see page 71) . 2CH indicator: L ights in 2-chan nel mode[...]
-
Page 21
21 Locatio n and F uncti on of Part s Chapter 1 Overvi ew E Menu control section a a a a MENU but to n Press this button to display t he m enu on the monitor screen and the time coun ter display. Press it again to exit the menu display. On h ow to use the m enu, see Chapter 4 “ Menu Settings.” b b b b RE SE T (NO ) button Pr ess th is b utt on [...]
-
Page 22
22 Location and Functi on of Parts Chapter 1 Overvi ew Rear P anel a a a a AC IN con nector Use the su pplied powe r cord to connect this to an AC outlet. b b b b DV IN/OU T con nector (6-pin IE EE-139 4) This con nector inputs and outpu ts digital video and audio signals in DV form at. Notes • If the unit is co nnected to a device equipped with [...]
-
Page 23
23 Locatio n and F uncti on of Part s Chapter 1 Overvi ew A Analog video/audio signal input section (optional DSBK-1504/1504P Analog Input Board) The co nnectors in this section are available w hen the optional DSBK -1504/1504 P board is installed. a a a a VIDEO I N c on nec t or s ( BNC t yp e) There are the following VID EO IN connectors for inpu[...]
-
Page 24
24 Location and Functi on of Parts Chapter 1 Overvi ew B Analog video/audio signal output section a a a a VIDEO OU T con ne ct or s (BN C ty pe) There are the following VID EO OU T conn ectors for outputting analog video signals: •Y / C P S T •R − Y/ C/C PST •B − Y/ CPST (SU PER) The signals o utput from these co nnectors depend on the se[...]
-
Page 25
25 Locatio n and F uncti on of Part s Chapter 1 Overvi ew C Digital signal input/output section (optional DSBK-1501 Digital Input/Output Boar d) The co nnectors in this section are available w hen the optional DSBK -1501 bo ard is instal led. a a a a SD I/SDT I (QSD I) IN (Ser ial Digital Interface/ Serial D ata Tran sport In terface (QSD I) inpu t[...]
-
Page 26
26 Location and Functi on of Parts Chapter 1 Overvi ew[...]
-
Page 27
27 Usable C assettes Chapter 2 Recording and Playback Usable Cassettes This un it can use the DV CA M cassettes listed below . The numbers in e ach mod el name ind icate the maxim um record ing/playback time (in m inutes) for each m odel. For exam ple, the PDV -184M E has a ma ximum recording/playback tim e of 184 m inutes. Ca ssettes usab le for p[...]
-
Page 28
28 Usable Cassettes Chapter 2 Recordi ng and Pla yback D VC AM cass ettes T he fo llow i ng fig u re il lus tra tes the D V C A M ca ss ette s. Notes on using cassettes • Before storing the cassette for a lon g period of time, rew ind the tape to the beginning and be sure to put the c assette i n its storage case , preferably on end instead of fl[...]
-
Page 29
29 Usable C assettes Chapter 2 Recordi ng and Pla yback Preventing accidental erasure Set the R EC/SA VE switch on the cassette to SA V E to prevent accidental erasure of recorded c ontents. To enabl e r e- re cordi ng Set t he REC/ SAVE swi t ch to REC. W hen this switch is set to S AV E, the unit cannot record o n the tape. Insert ing and Ejectin[...]
-
Page 30
30 Usable Cassettes Chapter 2 Recordi ng and Pla yback No double insertion of cassettes W hen you insert a cassett e, the orange lock-o ut plate appears in the cassette com partment to prev ent double insertion. Ejecting a cass ette Press the E JECT button. REW PLAY F FWD STOP REC INPUT VIDEO AUDIO V:SDTI SDTI i.LINK SDI SG SDI SG SDI SG ANALOG CH-[...]
-
Page 31
31 Recor d i ng Chapter 2 Recordi ng and Pla yback Recording This section d escribes the necessary settings and operations to perform recording on this unit. The sam e settings and operations apply w hether you are using the un i t as part of an e diting syst em , for dubbing, or as a stand-alone recorder. For the necessary con nections for recordi[...]
-
Page 32
32 Reco rd i ng Chapter 2 Recordi ng and Pla yback Settings for Recor ding W hen controlling this unit from an editing control unit connec ted to the RE MO TE connector, see “LOC AL/REM O TE switch” on page 13 and the description of the R EMO TE I/F m enu item on page 73. 1 Power o n the video m onitor, then set its input switches according to [...]
-
Page 33
33 Recor d i ng Chapter 2 Recordi ng and Pla yback W hen the RE MO T E indicator is lit, selection of the time d ata type is carried out at the editing control unit. 5 Select the formats of v ideo and aud i o input signal to be recorded. Use the IN PUT SELE CT buttons in the video / audio input setting section to select the desired signal form ats.[...]
-
Page 34
34 Reco rd i ng Chapter 2 Recordi ng and Pla yback 6 Select the audio m ode. Se le ct e it he r t wo- c ha nne l mo de (2 CHANNEL) or f our - ch ann el mode ( 4 CHANNE L) wi t h th e RE C MODE me nu i t e m (see page 71) . The corresponding ind icat or lights in the R EC M ODE display. Cautions • Wh en recording in DV CAM format or this unit’s [...]
-
Page 35
35 Recor d i ng Chapter 2 Recordi ng and Pla yback Notes • When controlli ng this unit from an editing control unit connected to the REM OTE connector of this unit, set the LO CAL /REMO TE switch to REM OTE, turning the R EM OT E indicator on. W hen not, set t he sw i tch to LOC AL , turning the indicator off. • If you intend to use a t ape rec[...]
-
Page 36
36 Reco rd i ng Chapter 2 Recordi ng and Pla yback If the RE C IN HI in dicator lights: It indicates that the REC/S AV E sw it ch of the loade d cassette has been set to SAV E. Press the EJEC T button in the tap e transport control section to remove the cassette, then set the RE C/SAV E switch to RE C and reload the cassette. Note Wh en ejecting an[...]
-
Page 37
37 Recor d i ng Chapter 2 Recordi ng and Pla yback To per for m the fol l owi ng ope ra ti ons Re ferece level for reco rding in D V (SP ) forma t On many co nsumer D V dev ices, recording is carr ied out at a reference lev el of − 1 2 dB . Thr efo re, w hen rec ord ing i n D V (S P) f orm at o n th is u nit , usin g th e fixed referenced level o[...]
-
Page 38
38 Playback Chapter 2 Recordi ng and Pla yback Playback This section de scribes the settings and operations necessary to perform playback on this unit. The sam e settings and operations apply whether you are using the unit as part of an edit ing system , for dubbing, or as a stand -alone player VC R. For the necessary connections for playback and t[...]
-
Page 39
39 Playback Chapter 2 Recordi ng and Pla yback Play bac k Procedure Not e W hen controlling this unit from an editing control unit connected to the RE MO TE connec tor of this unit, set the LO CA L/RE MO TE switch of this u nit to RE MO TE, turning the RE MO TE indicator o n. When n ot, set t he sw itch t o LO CAL , turning the indicator off. 1 Ins[...]
-
Page 40
40 Playback Chapter 2 Recordi ng and Pla yback To per for m the fol l owi ng ope ra ti ons a) Whe n the SE ARCH ENAB LE men u item (see page 65) is set to ENA BLE. Operation Do this: Stop pla yback . Pre ss the ST OP but ton. The un it en ters s top mo de, and wi ll aut omat icall y s witch to st andby off mode a fter the t ime set with the ST OP T[...]
-
Page 41
41 Playback Chapter 2 Recordi ng and Pla yback Repeat Playbac k — A utomatic Cyclical Pla yback Proceed as follows to perform autom atic cyclical playback of recording (repeat playback ) between selected start and end points. 1 Set the desired repeat start and end po ints with the RE PEA T FU NCT ION men u it e m (see page 6 4) . You ca n set poi[...]
-
Page 42
42 Playback Chapter 2 Recordi ng and Pla yback Setting the current tape position as point A or B Proceed as follows to set the current tape position as po int A or B for repeat playback. W hile holding dow n the SET (YES ) button in the me nu control section, press the g or G butt on. The tim e code value of the current tape position is set as poin[...]
-
Page 43
43 Playback Chapter 2 Recordi ng and Pla yback Inputting time code v alu es f or points A and B Using the follow ing procedure, you can m odify the ti me co de value for point A or B. 1 Press the M ENU button. The f ol l owi ng men u di spl a y app ear s. 2 With “SE TUP M ENU” selected, press the G bu t ton. The display ch anges as follows. MEN[...]
-
Page 44
44 Playback Chapter 2 Recordi ng and Pla yback 3 Wit h “OP ERATI ONAL FUNCT ION” s el ec t ed , pr ess t he G button. The display ch anges as follows. 4 With “REPE AT FUNCTION” s el ec t ed, pr ess th e G button. The conten ts of the RE PEA T FU NC TION men u item are displayed. 5 Press the F b ut to n t o s el ect “ REPEAT TO P.” >R[...]
-
Page 45
45 Playback Chapter 2 Recordi ng and Pla yback 6 Press the G button. The display ch anges as follows. 7 Press the F button to select “A PO INT.” 8 Press the g butt on. The display ch anges as follows. >>> T ape top SETUP MENU OPERATIONAL FUNCTION REPEAT FUNCTION REPEAT TOP * TAPE TOP A POINT : T.TOP : V.END Monitor screen Time counter [...]
-
Page 46
46 Playback Chapter 2 Recordi ng and Pla yback 9 Press the F button to select “A PRE SET.” 10 Press the G but ton . The A PR ESE T M OD E screen appears. The time cod e value of the current point A is displayed below the screen titl e. 11 Use the g or G b ut to n to sel ect t he di gi t in t he t ime code val ue di s pl ay th at you want to cha[...]
-
Page 47
47 Playback Chapter 2 Recordi ng and Pla yback 13 Press the SET (YES) bu tt on to confirm the defined value. The m essage “N OW SAV ING...” is displayed on the mo nitor screen and “S av in g...” is sh ow n in the tim e co u nte r di spla y w hile the n ew sett ing is being saved in m emo ry. Caution The new setting may b e lost if you pow e[...]
-
Page 48
48 Playback Chapter 2 Recordi ng and Pla yback[...]
-
Page 49
49 Setting the Tim e D ata Chapter 3 Convenient Functions for Editing Operation Setting the Time Data This unit is provided with the following functions related to time data. • Display an d reset CNT value • Set, display, record, and play back S MPT E/EBU time code an d user bit data • Set, display, record, and play back V ITC The un it can o[...]
-
Page 50
50 Se tting the Tim e D ata Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n Mo nitor screen conten ts The co ntents of the mon itor screen are show n below. A Tim e data ty pe The follow i ng time data type indications are displayed. a) You can s witch be tween T C and VIT C using the TC SELECT me nu item (see pag e 68) . b) “*”[...]
-
Page 51
51 Setting the Tim e D ata Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n T o display the desired time data in the time counter displa y Pr es s t h e COUNTER S ELEC T but t o n on th e f r ont pa ne l. Each p ress of this button cycles through three options: CN T value, time code, and user bit data. The time data type indicator fo[...]
-
Page 52
52 Se tting the Tim e D ata Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n 2 Set the T IM E CO DE men u items (see pag e 68) as show n below. 3 Pre ss t he TC PR ESET bu tt on in th e me nu co nt ro l section. The current setting is shown on the m onitor screen and in the time co unter display on the front p anel. The leftmost digi[...]
-
Page 53
53 Setting the Tim e D ata Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n automa tically synchronize with the ex ternal time code input to the unit via the SD TI or i.LINK interface. Once an external time cod e signal has been input, the internal time code a dvancem ent mode and frame coun t mod e are automatically set as follows: [...]
-
Page 54
54 Se tting the Tim e D ata Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n 4 Press the F bu tto n to s elec t “T C IN SE R T.” 5 Press the G button. The fo llowing messa ge appears. Note If the recording form at is not DV CAM , a different messa ge appears. See “W hen recording format is not D VCA M” (p age 54 ). 6 Insert t[...]
-
Page 55
55 Setting the Tim e D ata Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n Press the SET (Y ES) button to end the operation and do it over again a fter replaci ng the tape w ith one recorded in DVCAM f or ma t . Not D VCAM! TC INSERT TC INSERT IS ABORTED DUE TO NON DVCAM FORMAT SOURCE. PUSH THE YES BUTTON. Time counter displ ay Moni[...]
-
Page 56
56 High-Speed and Low-Speed S earch — Quickl y and Accurate ly Determini ng Editi ng Points Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n High-Speed and Low- Speed Search — Quickl y and Ac curately Determining Editing Points Use the se arch function to easily locate the desired scene and to quick ly and accurately determine ed[...]
-
Page 57
57 Di gi t al l y Dubb i ng Si gna l s i n DVCAM/ DV For mat Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n Digitally Dubbing Signals in DVCAM/DV Format In addition to straightforward tape dub bing, you can also use this unit to dub signals in D VC AM / DV format automa tically from the beginning o f t he tape to the end through th[...]
-
Page 58
58 Di gi t al l y Dubb i ng Si g nal s i n DVCA M/DV F orma t Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n 3 Press the G button. This displays the item s on level 1 of the auto mod e execution m enu. 4 Press the G button to display the m enu level 2 for the item “S DT I DUB BING , ” and select the data to be dubbed w i th the[...]
-
Page 59
59 Di gi t al l y Dubb i ng Si gna l s i n DVCAM/ DV For mat Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n 9 W hen the dubbing is com pleted, press the MEN U button to exit the m enu. If the foll owing m essage appe ars in step 6 for an A/V/TC/CM dubbing operation W hen carrying out A /V/TC/CM dubbing, if you insert the cassettes [...]
-
Page 60
60 Di gi t al l y Dubb i ng Si g nal s i n DVCA M/DV F orma t Chapt er 3 Conveni ent Func t ion s for Edi t i ng Oper at io n In either case, the source tape section reco rded in DV (LP) format is dub bed as a no-signal section. SDTI DUBBING (A/V/TC/CM) ABORT:MENU KEY DUBBING COMPLETED. HOWEVER, A NON DVCAM/ DV(SP) FORMAT SEGMENT WAS ON THE SOURCE [...]
-
Page 61
61 Me nu Organizati on Chapter 4 Menu Settings Menu Organization As s hown i n t he fo l lowi ng fi gu re , th e men u s yst e m consists of four levels and is functionally divided into three subsystem s: the set up m enu, the auto mo de (AU TO FUN CTIO N) execution menu and the digital hours m eter display me nu. This chapter m ainly describes the[...]
-
Page 62
62 Me nu Organizati on Chapt e r 4 Menu Set ti n gs Me nu orga nizati on OPERATIONAL FUNCTION REPEAT FUNCTION AUTO EE SELECT REPEAT MODE REPEAT TOP REPEAT END A PRESET B PRESET CASSETTE OUT F. FWD/REW STOP STANDBY OFF DISPLAY CONTROL TAPE PROTECTION STOP TIMER STILL TIMER NEXT MODE TIME CODE SETUP MENU FROM STOP FROM STILL SHUTTLE F. FWD/REW CHARA.[...]
-
Page 63
63 Me nu Organizati on Chapt e r 4 Menu Set ti n gs VIDEO CONTROL AUDIO CONTROL MENU GRADE C PHASE MODE ADJ RANGE VIDEO GAIN CHROMA GAIN CHROMA PHASE SETUP LEVEL a) BLACK LEVEL b) LINE 335 REF LEVEL CH1 IN LEVEL CH2 IN LEVEL OUTPUT LEVEL SDTI DUBBING i.LINK DUBBING TC INSERT T1:OPERATION T2:DRUM ROTATION T3:TAPE RUNNING CT:THREADING HOURS METER A/V[...]
-
Page 64
64 Me nu Contents Chapt e r 4 Menu Set ti n gs Menu Contents Setup Menu The pu rpose and settings of the setup menu item s are described below. Indications of men u items and settings • In the table below entitled “M enu contents,” the indication of each m enu item or setting on the m onitor screen is show n first, then the indication of the [...]
-
Page 65
65 Me nu Contents Chapt e r 4 Menu Set ti n gs A UTO EE SELECT [> Au to EE]: Determine wh ether the un it enters EE mo de or PB mode when aud io and video signal s from other e quipment are i nput. When this uni t is us ed as the recorder f or cut ed iting, it i s possi ble to ou tput the in put audio a nd video signals to the mon itor . This en[...]
-
Page 66
66 Me nu Contents Chapt e r 4 Menu Set ti n gs PLA Y ST ART [> PLA Y start]: Set the timing f or switchin g from stop m ode to pla yback mode . In an edi ting syst em includ ing an edi ting con trol unit suc h as the PVE-500, you can adjust this setting so that th e dela y before switc hing to p layback mode is the same o n all the decks of the [...]
-
Page 67
67 Me nu Contents Chapt e r 4 Menu Set ti n gs SUB ST A TUS [> Sub status]: Se lect supp lementary statu s infor matio n supe ri mpos ed on o utput from the B − Y/CPST (SUPER) connecto r to the monitor . * OFF [>> OFF]: Nothing of supplement ary status in formation EDIT PRESET [>> Edit p re]: Indicati ons of the editing mod e setti[...]
-
Page 68
68 Me nu Contents Chapt e r 4 Menu Set ti n gs TIME CODE [Time code]: Setti ngs related to the time co de generator Description of s ettings TC MODE [> TC mode]: Determine the ti me code to use: internal time cod e using a pres et initial v alue , regener ated internal time cod e (loc ked to tim e code read from tape), or e xternal time c ode. *[...]
-
Page 69
69 Me nu Contents Chapt e r 4 Menu Set ti n gs VITC POS SEL-1 [> VITC pos-1]: Select a line to in ser t the VITC in. Not e Y ou ca n insert the VITC s ignal in two plac es. T o ins er t it in tw o places , set both this item an d also VITC PO S SEL-2. (Fo r DSR-1500A) 20 LINE [> > 20 line] to 12 LINE [>> 12 line]: Select a ny line fr[...]
-
Page 70
70 Me nu Contents Chapt e r 4 Menu Set ti n gs VIDEO CONTR OL [Video] : Settings related to video contro l Description of settings INT VIDEO SG [> Vid eo SG]: Select the test sign al to be output fr om the int er nal t est signal g enerato r . When SG is selec ted using the VIDEO b utton in the vid eo/audio input setting section , the in ter nal[...]
-
Page 71
71 Me nu Contents Chapt e r 4 Menu Set ti n gs PR OCESS CONTROL [> Pr oc ctrl] C PHASE MODE [>> C Phas MD]: Sele ct the phase rota tion mode f or chroma phas e control . The ef fe ct of this s etting applies to the ou tput le vels of all o f the com posite video , S-video , SDI and compo nent vide o signals . * U/V (COMPOSITE) [ >>&g[...]
-
Page 72
72 Me nu Contents Chapt e r 4 Menu Set ti n gs INPUT ARRANGE [> Input a rng]: Make s ettings f or input audio m ixing. Not e When, in 4-channel mode , analog audio is se lected f or all f our channel s (chann els 1/2 an d 3/4), the same ana log audi o signals are recor ded on channels 1 and 3 and on chann els 2 and 4, res pectiv ely . That is , [...]
-
Page 73
73 Me nu Contents Chapt e r 4 Menu Set ti n gs JOG CON TROL [ > Jog ctrl]: Sele ct whet her to adju st the audio p la ybac k speed during slo w pla yback. OFF [>> OFF]: D o not ad just the a udio pla yback sp eed. * ON [>> ON]: Adjus t the audio play bac k speed. SHUTTLE MUTE [> Sh utl mut e]: Set the audio mutin g condi tions dur[...]
-
Page 74
74 Me nu Contents Chapt e r 4 Menu Set ti n gs SETUP B ANK OPERA TION [Setup Bank]: Settings relate d to menu bank operatio ns Description of s ettings RECALL B ANK1 [> R ecall 1]: Recal l menu setti ngs fr om menu bank 1. (1) Select the bank y ou want to recall, then press the G butt on. Messag e “ RECALL OK? ” appears . (2) T o recall, pre[...]
-
Page 75
75 Me nu Contents Chapt e r 4 Menu Set ti n gs EE OUT PHASE s ettings f or time code output Use the fo llowing as reference inform ation whe n setting th e EE OUT PHAS E men u i t em (see page 69) . THROUGH mo de In this mod e, the LTC signal is output with the ph ase synchronized with the input ti m e code signal. This mode is appropriate wh en re[...]
-
Page 76
76 Me nu Contents Chapt e r 4 Menu Set ti n gs VI DEO OUTPUT P HASE mod e The tim e code output signa l is synchronized w i th the output video signal. This m ode is appropriate when outputti ng signals from a single device to a n umber of V CR s using separate cables for video, audio, and time co de. In this mod e, the same tim e code is recorded [...]
-
Page 77
77 Me nu Contents Chapt e r 4 Menu Set ti n gs A uto Mo de (A UT O FUNCTION) Execution Menu The following table show s the purpose and fun ction of the items in the auto m ode ex ecution menu . For details of the use of individual items, see “D igitally Dub bing Signals in DVC AM/D V Form at” on page 57 and “Rereco rding the Time Co de—T C [...]
-
Page 78
78 Cha ngi ng M enu Setti ngs Chapt e r 4 Menu Set ti n gs Changing Menu Settings This section exp lains how to cha nge men u settings. Buttons Used to Change Settings Use the fo llowing buttons in the m enu control section to change the menu settings. Changing the Settings of Basic Items The factory default setting is to display only the basic ite[...]
-
Page 79
79 Changing Men u Setti ngs Chapt e r 4 Menu Set ti n gs 2 W ith “SETU P M ENU” selected, press the G button. This displays all item s on m enu level 1. 3 Press the f or F button to select the required it em . 4 Press the G button. This displays m enu level 2 for the m enu item selected in step 3 . 5 Press the f or F button to select the i tem [...]
-
Page 80
80 Cha ngi ng M enu Setti ngs Chapt e r 4 Menu Set ti n gs 8 To ch ange other settings, press the g b utto n to retu rn to the previous screen, then repeat steps 5 to 7 as required . 9 W hen you hav e completed the settings, press the SET (YE S) button. T he m essa ge “N OW SA V ING ...” ap pe ars on th e mo nitor screen, and “Saving...” ap[...]
-
Page 81
81 Changing Men u Setti ngs Chapt e r 4 Menu Set ti n gs 2 W ith “SETU P M ENU” selected, press the G button. This displays all basic an d enhanced items on m enu level 1. 3 Follow the same proc edure as in steps 3 to 8 of the procedu re i n the section “C hanging the Settings of Basic Item s” (page 78) usi ng t he fFgG buttons to select an[...]
-
Page 82
82 Displayi ng Supplem entar y Status I nformati on Chapt e r 4 Menu Set ti n gs Displaying Supplementary Status Information W hen you set the SUB STATUS menu item (see pa ge 67) to other than O FF, you can v iew supplem entary status information on the monitor screen below the op erating mod e display area. The fol l owi ng i t ems of su ppl e men[...]
-
Page 83
83 Displaying Suppl eme ntary Stat us Inf ormation Chapt e r 4 Menu Set ti n gs Display f o rmat of supplementary status inf ormation when the SUB ST A TUS men u item is set to ALL All items of sup plementary status information are displayed in the ord er shown b el ow . When the SUB ST A TUS menu item is set to A U DIO MIXING: On-screen indication[...]
-
Page 84
84 Displayi ng Supplem entar y Status I nformati on Chapt e r 4 Menu Set ti n gs[...]
-
Page 85
85 Connections for a Digit al Non-Linear Editing System Chapter 5 Connections and Settings Connections for a Digital Non-Linear Editing System This unit can b e connected to a n ES-7 E ditStation to configure a d igital non-linear editing system. If you use the SDTI (Q SDI) interface w ith the optional DSB K-1501 board i nstalled in the unit, you c[...]
-
Page 86
86 Connections for a Di gital Non-Linear Edi ting System Chapter 5 Connections and Setti ngs Settings on the D SR-1500A /1500AP For details of video/au dio input and audio m ode settings, see “Settings for Recording ” on page 32. REF. VIDEO IN SDI/SDTI(QSDI) OUT SDI/SDTI(QSDI) IN MONITOR VIDEO OUT B-Y/CPST (SUPER) B B OUT(1/2/3/4) QSDI OUTPUT Q[...]
-
Page 87
87 Connections for a Cut Editing Syst em Chapter 5 Connections and Setti ngs Connections for a Cu t Editing System The follow i ng figure show s a cut editing system configuration that includes tw o DSR-15 00A/1500AP uni ts to serve as the play er and recorder. For details of con necting devices other than the D SR- 1500A /1500AP, refer to the inst[...]
-
Page 88
88 Connections for a Cut Edit ing System Chapter 5 Connections and Setti ngs Settings on the D SR-1500A / 1500A Ps (record er and pl ayer ) a) for pl ayer onl y b) for record er only For details of the video /audio input and audio m ode settings for the recorder, see “ Settings for Recording” on page 32. About reference video si gnals In order [...]
-
Page 89
89 Connections for an A/B Roll Edit ing System Chapter 5 Connections and Setti ngs Connections for an A/B Ro ll Editing System The follow i ng is an exam ple configuration of A/B ro ll editing system u sing the DSR -1500A/1500A P. In this configuration, two D SR-1500A/15 00AP u nits are used, one as the recorder and the othe r as player 1, and an a[...]
-
Page 90
90 Connections for an A/B Roll Edit ing Syst em Chapter 5 Connections and Setti ngs a) When using a DFS-500/500P DME Switcher, the phase of the video signals processed by the DFS-500/500P is delayed. It is therefore necess ary to connect a delay unit between the MXP-290 Audio Mixer ’ s output and the audio input to the DSR-1500A/1500AP (recorder)[...]
-
Page 91
91 Connections for an A/B Roll Edit ing System Chapter 5 Connections and Setti ngs A udio monitor system connections The follow ing shows a n examp le of audio mo nitor system connections. For details of these co nnections, refer to the instruction manu al for each connected de vice. Reference video signal connection W hen you perform recording, be[...]
-
Page 92
92 Connections for an A/B Roll Edit ing Syst em Chapter 5 Connections and Setti ngs Control si gnal connections The follow ing shows a n exam ple of control signal connections to en able the editing control unit to control all other A/B roll editing system devices. SWITCHER PLAYER 2 MIXER PLAYER 1 RECORDER REMOTE EDITOR REMOTE REMOTE DSR-1500A/1500[...]
-
Page 93
93 Connections for an A/B Roll Edit ing System Chapter 5 Connections and Setti ngs Video/audio signal connections The follow ing shows a n exam ple of video/audio signal connections in a n A/B roll editing system . In this example, analog component signals are u sed as t he video signals and XLR 3-pin connectors are used as audio input/output conne[...]
-
Page 94
94 Connections for an A/B Roll Edit ing Syst em Chapter 5 Connections and Setti ngs Settings on the D SR-1500A / 1500A P (player) Connection of a video monitor Set up the follow ing connections to en able mon itoring of video an d audio signals on a v i deo mo nit or. In addition to the video an d audio signals, you can have tim e data, the operati[...]
-
Page 95
95 Connections for an A/B Roll Edit ing System Chapter 5 Connections and Setti ngs Settings on an editing contr ol unit W hen connecting a n editing control unit, make the settings as follows, according to the model. PVE- 500 No settin gs are required. BV E-600/900/910/2000 (NTS C mo del) or FXE-100/ 120 Se t the VC R c on stan ts as foll ow s. BV [...]
-
Page 96
96 Connections for SDTI ( QS DI) Du bbing Chapter 5 Connections and Setti ngs Connections for SDTI (Q SDI) Dubbing The follow ing shows a n exam ple of connections for digitally dubbing SD TI (QSD I) signals (see page 57) using a pair of DSR -1500A/150 0AP un i ts. Notes • This app lication requi res both of the DSR-1500A / 1500A P units (recorde[...]
-
Page 97
97 Connections for Analog Recording Chapter 5 Connections and Setti ngs Connections for An alog Recording It is possible to record analog playback signals from another recorde r or player on this unit. The following shows connections for a system in which analog comp onent video signals and two ch annels of audio signals are recorded b etween two D[...]
-
Page 98
98 Connections for Anal og Recording Chapter 5 Connections and Setti ngs Settings on the D SR-1500A / 1500A P (player) Switch/ menu item Setting LOCAL/REMO TE switch LOCAL OUTPUT LEVEL men u items (see page 72) Normal ly + 4 dBm VIDEO OUTPUT menu item (see page 73) Y − R, B (Y − R,B indicato r lights.) A UDIO OU TPUT menu item (see page 73) 1/2[...]
-
Page 99
99 Adjusti ng the Sync and Subcarrier Phases Chapter 5 Connections and Setti ngs Adjusting the Sync an d Subcarrier Phases W hen using tw o or more p layers, as in an A/B roll editing system, it is necessary to synch ronize the sync and subcarrier (for com posite signals) phases of the signals to be edited. If they are no t synchronized, picture in[...]
-
Page 100
100 Adjusti ng the Sync and Subcarrier Phases Chapter 5 Connections and Setti ngs P erf orming a phase adjustment operation 1 Press the SC H button o n the vectorscope. The vectorscope switches t o SCH m ode. 2 Press the B channel button on the ve ctorscope. This d isplays the black burst signa l from the switcher. 3 Press the E XT bu tt on on the [...]
-
Page 101
101 Ma in tenance Chapter 6 Maintenance and Troubleshooting Maintenance Condensation If you m ove the unit suddenly from a cold to a warm location, or if you use it in a very hum i d place, mo isture from the air ma y condense on the head drum. This is called condensa tion, and if a tape is run in this state, the tape may stick to the drum and can [...]
-
Page 102
102 Ma int enance Chapter 6 Maintenance and T r oubleshooting Displaying the digital hour s meter Use the fo llowing procedure. 1 Press the M EN U button in the m enu co ntrol section. The m enu selection level display appears on the mo nitor screen and in the time counter display. 2 Press the F but t on t o s el e ct “HOUR S METER. ” 3 Press t[...]
-
Page 103
103 Ma in tenance Chapter 6 Maintenance and T r oubleshooting To end th e di gi ta l hour s mete r d is pl ay Press the M EN U bu tton in the menu control section. To reset th e trip valu es Abou t this operation, consult your Sony dealer. Head Cleaning Alwa ys use the DV M 12CL (m ini size) or DV 12CL (standard size) Clean ing Cassette to clean th[...]
-
Page 104
104 Troubleshooting Chapter 6 Maintenance and T r oubleshooting Troubleshooting If an alarm m essage appears on the m onitor screen, or if the unit appears to b e malfunctioning, please che ck the following befo re contacting your Sony d ealer. T ape prob lems Symptom Cause Remed y Recording is not possib le. The cassett e ’ s REC/SA VE switch is[...]
-
Page 105
105 Troubleshooti ng Chapter 6 Maintenance and T r oubleshooting Monitor pr oblems Symptom Cause Remed y Data is n ot superimpos ed on the monitor sc reen. The CHARA. DISPLA Y menu item is se t to O FF . Set the CHARA. DI SPLA Y menu i tem (see page 66) to ON. The monit or is not c onnected to the B − Y/CPST (SUPER) con nector of t his unit. Conn[...]
-
Page 106
106 Troubleshooting Chapter 6 Maintenance and T r oubleshooting Err or Messages This unit is provided with a self-diagnostic function that detects internal abnorm alities. When it detects an abnorm ality, i t outputs an error m essage to the mon itor screen and i ndicates an error c ode in the time counter display. Not e To di spl ay er ror mess ag[...]
-
Page 107
107 Troubleshooti ng Chapter 6 Maintenance and T r oubleshooting Alarm me ssages and associated directions Alarm messa g e on monito r screen (Cause) Direction Alarm mess age in time counter dis play A cleaning tape has been inse r ted. The tape will a utomaticall y be ejecte d after clean ing is complete d. Clean ing Tp! A non-sta ndard sign al is[...]
-
Page 108
108 Troubleshooting Chapter 6 Maintenance and T r oubleshooting T ape end ha s been de tected. Use a new c leaning tape. T ape end! T ape not edi table . Use a tape recorde d in D VCAM f ormat. Not D VCAM! Use a tape recorded i n 525/60 f or mat. (F or DSR- 1500A) 625/50 T ape (For DSR- 1500A) Use a tape recorded i n 625/50 f or mat. (F or DSR- 150[...]
-
Page 109
109 Precauti ons Appendixes Precautions On safety • Should a ny liquid or solid object fall into the cabinet, unplug the unit and h ave it checked by qua lifi ed personnel be fore operating it further. • Unp lug the unit from the w all outlet if it is not to b e used for an extend ed period of time. • To d isconnect the cord, pull it out by t[...]
-
Page 110
110 Specificat ions Appendix es Specifications General Signal system DSR-1500A: N TSC DSR-1500A P: PAL Pow er requirements 100 V to 2 40 V A C, 50/60 H z Pow er consumption (with all options installed) 55 W Peak inrush current ( 1)P ower ON, cu rr ent pr ob e me th od: 10 A (100 V), 45 A (240 V) (2)Hot sw itching inrush current, measure d in accord[...]
-
Page 111
111 Sp ecif ica tion s Appendix es Video perf ormance Band width Com posite/S-video (DSR -1500A): 30 H z to 4.2 M H z ± 1.0 d B (Y ) Comp osite/S-video (DSR -1500A P): 25 H z to 4.8 M H z ± 1.0 d B (Y ) Comp onent (DSR -1500A): 30 H z to 5.0 M H z ± 1.0 d B (Y ), 30 H z to 1.5 M Hz +1.0/ − 5 .0 dB (R − Y/ B − Y) Comp onent (DSR -1500AP): 2[...]
-
Page 112
112 Specificat ions Appendix es Output connectors Dig it al si gnal out put s SDI/SD TI (QS DI) O UT (optional DSB K-1501 Digital Input/Output B oard required) BNC type (×2) SDT I (QSD I) format (270 M bps) SDI form at (270 M bps), SMPT E 259M / CC IR656-III AUDI O (AES /E BU) OUT ( op ti on al DS BK-1 501 Di gi t al Input/Output B oard required) [...]
-
Page 113
113 C lipL ink G uid e Appendix es ClipLi nk G uide What Is Cl ipLink? The C lipLink function greatly im proves the efficiency of the video prod ucti on proc ess as a who le by recording various editing-related data on tape w hen shooting. As such, ClipLink is a revolutionary function that transce nds the conven tional separati on of sh ooting and [...]
-
Page 114
114 C lipL ink G uide Appendix es Example System Configu ration and Op erati on Flow The follow i ng illustration shows a n exam ple system configuration for using the ClipLink fu ncti on an d a typical ClipLink op eration flow. Shooting DVCAM camcorder (DSR-130/130P/ 370/370P/570WS/ 570WSP) DVCAM stand ard cassett e or DVCAM mi ni cassette Index p[...]
-
Page 115
115 C lipL ink G uid e Appendix es Data Generated When Shooti ng The following describes the kinds of data that is generated when using the ClipLink function. Index pictures W hen shooting, a single-fram e image from the M ark IN point at the st art of each scene is recorded as a still picture into the cam corder’s internal mem ory. The se images[...]
-
Page 116
116 C lipL ink G uide Appendix es How to recor d ClipLink log data The follow ing describes how to record the various ClipLink log data items. OK/N G st at us To designa te a scene as “NG ,” press the NG button on the camera while shooting the scene or at any time b efore you begin shooting the next scene. All scenes that do not receive an “N[...]
-
Page 117
117 C lipL ink G uid e Appendix es Time codes recor ded f or Mark IN/OUT points There is a g ap between actual time codes a nd Ma rk IN/ OU T time codes recorde d in the cassette mem ory, as shown in the figure below . The tim e code v alue is rounded up at each Mark IN point and rounded d own at eac h Mark OU T point, to a w hole number o f second[...]
-
Page 118
118 Glossary Appen dixes Glossary A /B ro ll ed iting An ed iting method that uses tw o or more p layback V CRs to create special effects such as d issolve and wipe, and uses one record VC R to record the results of the ed iting. Using an editing control unit allows efficient control of the VC Rs and very precise ed i ting. AES/ EBU f or mat A un i[...]
-
Page 119
119 Glossary Appen dixes S/ N Abbrev iati on of Signal-to-Noise (ratio). The higher the S /N value, the less noise and higher the picture quality. Searc h mo de A V CR o perating mode used wh en searching for spec i fic scenes, by viewing the video output or time code values while playing back the tape at various speeds in forward or reve rse direc[...]
-
Page 120
120 Glossary Appen dixes[...]
-
Page 121
121 Ind ex Inde x Index Numerics 2CH indicat or 20 32K indicat or 20 44.1K in dicator 19 48K indicat or 19 4CH indicat or 20 9P indi cator 19 A A/B roll editing system 89 AC IN connector 22 Accessories 112 AES/EBU format 15 indicator 18 Alarm messages 106 Analog audio 8 audio inp ut(s) 15, 111 audio outp uts 112 Input Boar d 9 interfaces 8 recordin[...]
-
Page 122
122 Index Inde x audio 56 sound 8 L LOCAL/REMOTE switch 13 LP 1 9 M Maintenance 9, 101 Mark IN/OUT points 116, 117 Menu 61 AUDIO CONTROL 71 AUTO FUNCTION 77 changing settings 78 contents 64 DISPLAY CONTROL 66 indi cat ions 6 4 INTERFACE SELECT 7 3 MENU GRADE 74 OPERATIONAL FUNCTION 64 organizati on 61 resetting to defa ult settings 81 SETUP BANK OP[...]
-
Page 123
123 Ind ex Inde x User bit data setting 51 V V SDTI indi cator 17 VAR swit ch 14 VIDEO button 15 IN connec tors 23 indicators 18 INPUT PHASE m ode 75 OUT connectors 24 OUTPUT PHASE mode 76 Video performance 111 process contro l 9 test si gnal 15 Video/audi o input s etting secti on 15 VITC field indicat ion 50 indicator 20 W Wide track 7 Y Y/CPST c[...]
-
Page 124
124 Index Inde x[...]
-
Page 125
Sony Co r porat ion http://www.s ony.net/[...]