Sony BTA-NW1 manuel d'utilisation

3-070-124- 11 ( 2 ) Modem Adaptor with Bluetooth ™ Function Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you cal[...]

2- GB WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Countries and areas This product is intended to be used in the following countries or areas. Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Hong Kong, Ireland, Japan, Luxembourg, Netherlands, New Zealand, Norway, Portugal, Sin[...]

3- GB The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connecte[...]

4- GB The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommun[...]

5- GB T able of contents Introduction • The unit is designed to communicate with a Bluetooth device, and allow that device to access the Internet to send/receive data via the modem. • The unit complies to the protocols of a dial-up network. • Use of size AA alkaline dry batteries allows the unit to be used as a mobile device. An overview of t[...]

6- GB Precautions The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Installation/storage Do not place the unit in locations that are: • Extremely hot such as in a car parked in the sun • Under direct sunlight or near sources of high temperature[...]

7- GB Identifying the parts 1 POWER lamp (green) 2 ON LINE lamp (orange) 3 lamp (blue) Lamp POWER ON LINE (green) (orange) (blue) z – z z z zz z z : The lamp turns on : The lamp flashes 4 DC IN jack 5 POWER ON/OFF switch 1 2 3 4 5 qa q; qs 6 7 8 9 6 TONE/PULSE10/PULSE20 selector 7 CLEAR button Note Resets all the setup items to the default values[...]

8- GB Pr eparing the unit Before using the unit, carry out the following preparations. If the plug of the exclusive modem cable does not match the telephone terminal jack, attach an optional plug adaptor. The plug of the exclusive modem cable is an RJ-11 plug. Installing the exclusive modem card and exclusive modem cable to the Modem Adaptor with B[...]

9- GB To DC IN To a wall outlet (mains) or To a wall outlet (mains) AC power adaptor AC-PT1 AC power adaptor AC-PW1 x Using the supplied AC power adaptor Connect the AC power adaptor to the DC IN jack on the unit and a wall outlet (mains). Notes • The socket outlet should be as close as possible to the unit and easily accessible. • The shape of[...]

10- GB Setting up the unit You must make certain settings before you can connect the unit to your phone line. Choose the proper settings for your telephone signaling type. You also have to set the AREA CODE switches according to your area. ( 1 ) Before making the settings, check that the POWER ON/OFF switch is set to OFF. ( 2 ) Remove the battery c[...]

11- GB To check the dial speed of a pulse dialing phone You can change the dialing speeds of some pulse dial phones. To check the dial speed, switch the dial speed selector on the phone and check the clicking sound. The slower one is the normal setting. When you select the fast dial speed, set the TONE/PULSE10/ PULSE20 selector to PULSE20. The setu[...]

12- GB Registering Bluetooth devices Up to 16 Bluetooth devices can be registered with this unit. When registering devices, consult the operating instructions supplied with the Bluetooth device. When you try to register the 17th device, you must clear all of the previous registrations. ( 1 ) Before registering, be sure to set the POWER ON/OFF switc[...]

13- GB When you try to register a 17th Bluetooth device You have to clear all the previous registrations. Press CLEAR using a sharp-pointed object to clear all the registrations. Once you turn the unit off and on, you can register a new Bluetooth device. Notes • When you register Bluetooth devices, be sure to set the BONDING/NORMAL switch to BOND[...]

14- GB Communicating with the Bluetooth device After registering a Bluetooth device, you can communicate with that Bluetooth device. ( 1 ) Set the POWER ON/OFF switch to ON. The lamps turn on as described below. ( z : The lamp turns on) POWER ON LINE (green) (orange) (blue) z –– z – z ( 2 ) Turn on the registered Bluetooth device and start co[...]

15- GB T r oubleshooting If you experience trouble with your unit, first check the following items. Should your unit still not operate properly after you have made these checks, consult your Sony dealer or local authorized Sony service facility. Power Symptom Cause and/or solution • The size AA alkaline dry batteries are completely dead. c Replac[...]

16- GB Communication Symptom Cause and/or solution • The exclusive modem card is not inserted properly. c Insert it properly. See “Preparing the unit” on page 8. • The size AA alkaline dry batteries are completely dead. c Replace them with new size AA alkaline dry batteries. • The setup of the AREA CODE switches is wrong. c Set them up co[...]

17- GB Specifications Wireless communication Communication system Bluetooth specification Ver. 1.1 Maximum communication speed 1) 2) Approx. 723 kbps Maximum output 3) Bluetooth specification Power Class1 Receiver sensitivity 3) – 70 dBm Communication distance 2) Approx. 10 m (32.8 feet) (Open space, when using a Sony Network Handycam with the Bl[...]

2- FR AVERTISSEMENT Pour pr é venir tout risque d ’ incendie ou d ’é lectrocution, conserver cet appareil à l ’ abri de la pluie et de l ’ humidit é . Pays et régions Ce produit est destin é à ê tre utilis é dans les r é gions et pays suivants : Allemagne, Australie, Autriche, Belgique, Canada, Danemark, Etats-Unis, Finlande, Fran[...]

3- FR Avertissement: L ’ utilisateur ne doit pas tenter de faire ces raccordements lui-m ê me; il doit avoir recours à un service d ’ inspection des installations é lectriques, ou à un é lectricien, selon le cas. AVIS: L ’ indice d ’é quivalence de la sonnerie (IES) assign é à chaque dispositif terminal indique le nombre maximal de [...]

4- FR[...]

5- FR T able des matièr es Introduction • Cet appareil est con ç u pour communiquer avec un p é riph é rique Bluetooth et lui permettre d ’ acc é der à Internet pour l ’ envoi et la r é ception de donn é es via le modem. • Cet appareil est conforme aux protocoles d ’ acc è s à un r é seau commut é . • Cet appareil peut ê tr[...]

6- FR Précautions L ’ appareil n ’ est pas d é connect é de la source d ’ alimentation (secteur) tant qu ’ il reste branch é sur la prise murale, m ê me si l ’ appareil proprement dit a é t é mis hors tension. Installation et entreposage Ne pas placer l ’ appareil dans des endroits : • sujets à des temp é ratures tr è s é l[...]

7- FR A propos de l’adaptateur secteur fourni • Lorsqu ’ il est pr é vu que l ’ appareil ne sera pas utilis é pendant une p é riode prolong é e, le d é brancher de la prise murale (secteur). Pour d é brancher le cordon d ’ alimentation, le tirer par la fiche. Ne jamais tirer sur le cordon lui-m ê me. • Ne pas utiliser l ’ appar[...]

8- FR Identification des différ entes parties de l’appareil 1 T é moin POWER (vert) 2 T é moin ON LINE (orange) 3 T é moin (bleu) T é moin POWER ON LINE (vert) (orange) (bleu) z – z z z zz z z : le t é moin s ’ allume. : le t é moin clignote. 1 2 3 4 5 qa q; qs 6 7 8 9 4 Prise DC IN (alimentation CC) 5 Commutateur POWER ON/OFF 6 Commut[...]

9- FR Installation de l’appar eil Avant d ’ utiliser l ’ appareil, suivez les directives ci-dessous. Si la fiche du c â ble modem exclusif ne convient pas à la prise t é l é phonique, connectez un adaptateur de fiche correspondant (en option). La fiche du c â ble modem exclusif est de type RJ-11. Installation de la carte modem exclusive [...]

10- FR x Utilisation de l’adaptateur secteur fourni Branchez l ’ adaptateur secteur sur la prise DC IN de l ’ appareil et sur une prise murale (secteur). Remarques • L ’ appareil doit ê tre plac é aussi pr è s que possible de la prise murale et celle-ci doit ê tre facilement accessible. • La forme de l ’ adaptateur secteur varie s[...]

11- FR Préparation de l’appar eil Certains param è tres doivent ê tre r é gl é s avant que l ’ appareil puisse ê tre connect é à la ligne t é l é phonique. Choisissez les param è tres correspondant au mode de num é rotation de votre t é l é phone. R é glez é galement les commutateurs AREA CODE selon votre indicatif r é gional. [...]

12- FR Vérification de la vitesse de numérotation d’un téléphone à numérotation par impulsions Il est possible de modifier la vitesse de num é rotation de certains t é l é phones à num é rotation par impulsions. Pour v é rifier la vitesse de num é rotation, modifiez la vitesse de num é rotation du t é l é phone, puis surveillez le[...]

13- FR Jusqu ’à 16 p é riph é riques Bluetooth peuvent ê tre enregistr é s dans cet appareil. Pour l ’ enregistrement d ’ un p é riph é rique Bluetooth, reportez-vous à son mode d ’ emploi. Avant de pouvoir enregistrer un 17e p é riph é rique, vous devez effacer tous les enregistrements pr é c é dents. ( 1 ) Avant de commencer l[...]

14- FR Enregistrement d’un 17e périphérique Bluetooth Pour que l ’ enregistrement d ’ un 17e p é riph é rique Bluetooth soit possible, tous les enregistrements pr é c é dents doivent ê tre effac é s. Pour effacer tous les enregistrements, appuyez sur la touche CLEAR avec un objet pointu. Eteignez ensuite l ’ appareil, puis rallumez-[...]

15- FR Communication avec un périphérique Bluetooth L ’ enregistrement d ’ un p é riph é rique Bluetooth vous permet de communiquer avec celui-ci. ( 1 ) R é glez le commutateur POWER ON/OFF sur ON. Les t é moins s ’ allument tel que d é crit ci-dessous. ( z : le t é moin s ’ allume.) POWER ON LINE (vert) (orange) (bleu) z –– z ?[...]

16- FR Dépannage Si vous constatez des probl è mes de fonctionnement de l ’ appareil, v é rifiez d ’ abord les sympt ô mes et rem è des ci-dessous. Si votre appareil continue de mal fonctionner, consultez votre revendeur Sony ou le centre d ’ entretien Sony agr éé le plus proche. Alimentation Sympt ô me Cause et solution • Les piles[...]

17- FR Communication Sympt ô me Cause et solution • La carte modem exclusive n ’ est pas ins é r é e correctement. c Ins é rez la carte correctement. Reportez-vous à la section « Pr é paration de l ’ appareil » à la page 9. • Les piles sont compl è tement à plat. c Remplacez-les par des piles s è ches alcalines de taille AA neuv[...]

18- FR Spécifications Communication sans fil Syst è me de communication Sp é cification Bluetooth Ver. 1.1 Vitesse de communication maximale 1) 2) 723 kbps environ Sortie maximale 3) Sp é cification Bluetooth classe de consommation 1 Sensibilit é du r é cepteur 3) – 70 dBm Distance de communication 2) 10 m (32,8 pieds) (sans obstacles, lors[...]

[...]

Sony Corporation Printed in Japan 307012411[...]