Sony KLV 23M1 manuel d'utilisation

© 2004 Sony Corporation 2-176-244- 12 (1) LCD Color TV Operating Instructions KL V -23M1[...]

2 Owner’s Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Contacting Sony If, after reading the following instructions, you have additional questions related to the use of you[...]

3 WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the [...]

4 CAUTION Use the following SONY appliance(s) only with the following WALL- MOUNT BRACKET. Use with other WALL-MOUNT BRACKET may cause instability and result in possible injury. SONY APPLIANCE MODEL NO. KLV-23M1 SONY WALL-MOUNT BRACKET MODEL NO. SU-W210 To Customers Sufficient expertise is required for installing the specified product. Be sure to s[...]

5 For the unit with a three-wire grounding type AC plug This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall out[...]

6 Broken pieces Do not throw anything at the unit. The screen glass may break by the impact and cause serious injury. Cable wiring Take care not to catch your feet on the cables. It may damage the unit. Heat Do not touch the surface of the TV. It remains hot, even for some time after the TV is turned off. Volume adjustment s Adjust the volume so as[...]

7 Outdoor use Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire or electric shock. If the unit is exposed to direct sunlight, the unit may heat up and it may damage the unit. Vehicle and ceiling Do not install this unit in a vehicle or hung from the ceiling. Bumping of the vehicle may cause the unit to fall do[...]

8 Service Damage Requiring Service Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: s When the power cord or plug is damaged or frayed. s If liquid has been spilled into the unit. s If the unit has been exposed to rain or water. s If the unit has been subject to excessive shock [...]

9 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sourc[...]

10[...]

11 Ta b le of Contents Installing the TV Unpacking ................................................ 13 Overview of the Remote Control ............ 13 Remote Control Descriptions ........... 14 Programming the Remote Control ... 16 Using your Remote Controls with Other Equipment .................. 18 Overview of the TV Controls and Connectors ......[...]

12 Using Adv anced Features Adjusting the Picture Position Vertically .............................................. 55 Adjusting the Picture Position Horizontally ......................................... 56 Adjusting the Picture Quality ................. 57 Adjusting the Sound Quality .................. 59 Selecting Stereo or Bilingual Programs .[...]

13 Installing the TV Installing the TV Unpac king When you unpack this unit, make sure it includes the following: Notes • Do not detach the ferrite core from the cable. • The ferrite core is attached to one end of (not the center of) the cable. When connecting the cable to the TV, insert the end with the ferrite core into the VHF/UHF jack. Oper[...]

14 Remote Contr ol Descriptions Tip The MTS/SAP button, the number 5 button and the CH + button have a tactile dot. Use the tactile dot as a reference when operating the TV. Button Description 1 DVD/VCR, SAT/ CABLE Buttons 2 MUTING 3 PICTURE 4 WIDE 5 JUMP 6 TOP MENU 7 FAVORITES 8 FUNCTION Buttons 9 DVD/VCR Operating Buttons Press to turn on and off[...]

15 Installing the TV Button Description 0 Input Select Buttons qa VOL +/– qs RESET qd FREEZE qf POWER qg DISPLAY qh SLEEP qj 0 - 9 ENT qk MENU ql V / v / B / b w; F1 wa F2 Press to select the video equipment connected to the TV’s video inputs. TV : Press to select the TV to watch the TV programs. VIDEO 1/2 : Press repeatedly to cycle through th[...]

16 Pr ogramming the Remote Contr ol The remote control is preset to operate Sony brand video equipment. Sony Equipment Programmable Code Number DVD/VCR 601 (Sony Dream System) SAT/Cable 801 (Sony Satellite Receiver) If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure[...]

17 Installing the TV Manufacturer’s Codes DVD Players Manufacturer Code Sony 751 General Electric 755 Hitachi 758 JVC 756 Magnavox 757 Mitsubishi 761 Panasonic 753 Philips 757 Pioneer 752 RCA/PROSCAN 755 Samsung 758 Toshiba 754 Zenith 760 DVD Changers Manufacturer Code Sony 765 Panasonic 766 DVD/VCR Combo Units Manufacturer Code Sony 767 Zenith 7[...]

18 Operating a VCR To Turn on/off Control a VCR Change channels Record Play Stop Fast forward Rewind Pause Search the picture forward or backward Press DVD/VCR (POWER) DVD/VCR (FUNCTION) CH +/– N and z simultaneously N x M m X (press again to resume normal playback) M or m during playback (release to resume normal playback) Using y our Remote Con[...]

19 Installing the TV Operating a DVD Player or DVD Changer To Turn on/off Control a DVD player If you have a DVD changer, to skip discs Play Stop Pause Step through different tracks of an audio disc Step through different chapters of a DVD disc Select a track directly Display the menu (Setup) Display the top menu Operate the DVD menu Operating a 5.[...]

20 Overview of the TV Contr ols and Connector s Fr ont P anel Contr ols and Connectors To open the control door To open the control door of your TV, push the door just under the “ V OPEN” mark. Item/Jack Description 1 (IR) Infrared Receiver 2 (Timer) LED 3 1 (Power) and 1 (Power on/Stand by) LED 4 i Headphones jack 5 TV/VIDEO 6 – VOLUME + 7 ?[...]

21 Installing the TV Rear P anel Connector s Jack Description 1 VHF/UHF 2 VIDEO 1/2 IN VIDEO/L-AUDIO-R When your VCR or other equipment has S VIDEO S VIDEO 3 AC IN 4 AUDIO OUT (VAR/FIX) L/R 5 HD/DVD 3 IN Y, P B , P R /L-AUDIO-R 6 HDMI 4 IN HDMI/L-AUDIO-R RF input that connects to your VHF/UHF antenna or cable box. Connect to the composite A/V outpu[...]

22 Attaching and Remo ving the Cable Co ver Removing the cable cover 1 Push the hooks and draw the cable cover towards you. 2 Detach the cable cover from the hooks on the side of the TV. Attaching the cable cover 1 Attach the cable cover to the hooks on the side of the TV. 2 While pressing the hooks, push the cable cover onto the TV until it clicks[...]

23 Installing the TV Bundling Cor ds and Cables You can organize the cables in the back of the TV. 1 Bundle the cables into the opening of the cable cover, and attach the cover. 2 Put the cables from both sides together and secure them with the clip at the bottom. Notes • It may not be possible to fasten with clips if the cables are too thick. ?[...]

24 Connecting directl y to cable or an antenna VHF only or VHF/UHF or cable Also, set “Cable” to “Off” in the (Channel) menu (see page 37). Notes • It is strongly recommended to connect the antenna using a 75- ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, re[...]

25 Connecting and Setting the TV AC IN Complete other connections prior to connecting the power cord. 1 Connect the power cord to the AC IN connector of the TV. 2 Connect the other plug of the power cord to a wall outlet. Wall outlet Connecting the P ower Cor d AC power cord (supplied) For 120 V AC Connecting Optional Equipment Use the instructions[...]

26 VHF/UHF VIDEO IN VIDEO 1 S VIDEO ( MONO ) A UDIO R L Cable 75-ohm coaxial cable (supplied) S VIDEO cable (not supplied) VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) A/V cable (not supplied) VCR S VIDEO Rear of TV 75-ohm coaxial cable (supplied) Connecting a VCR and Cable TV Note When you connect video equipment to both the VIDEO and the S VIDEO [...]

27 Connecting and Setting the TV VHF/UHF VIDEO IN VIDEO 1 S VIDEO ( MONO ) A UDIO R L VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) S VIDEO Rear of TV 75-ohm coaxial cable (supplied) S VIDEO cable (not supplied) A/V cable (not supplied) Satellite antenna cable Satellite Receiver Connecting a Satellite Receiver Disconnect all power sources before mak[...]

28 VIDEO IN VIDEO 1 S VIDEO ( MONO ) A UDIO R L VHF/UHF Connecting a Satellite Receiver and a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Connect the CATV cable to the VCR’s VHF/UHF IN jack. 3 Using the supplied 75-ohm coaxial cable, conne[...]

29 Connecting and Setting the TV A UDIO R L A UDIO R L 3 HD/DVD IN A UDIO OUT ( V AR/FIX ) P B Y P R 1080i / 720p / 480p / 480i () When using your audio system speakers You can control the volume output from your audio system using the TV’s remote control (see “Programming the Remote Control” on page 16), by setting “Audio Out” in the (Au[...]

30 Connecting a D VD Play er with Component Video Connector s Use this hookup if: •Y our DVD player has component (Y, P B , P R ) jacks. Tips • The Y, P B and P R jacks on your DVD player are sometimes labeled as Y, C B and C R , or Y, B-Y and R-Y. If so, connect the cables to the matching colors. • To take advantage of the Wide Screen Modes,[...]

31 Connecting and Setting the TV VHF/UHF VIDEO IN VIDEO 1 S VIDEO ( MONO ) A UDIO R L S VIDEO cable (not supplied) DVD Player A/V cable (not supplied) Rear of TV S VIDEO AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) Connecting a D VD Pla yer with S Video and A udio Connector s Use this hookup if: •Y our DVD player does not have component (Y, P B ,[...]

32 A UDIO R L A UDIO R L 3 HD/DVD IN A UDIO OUT ( V AR/FIX ) P B Y P R 1080i / 720p / 480p / 480i () Connecting a Digital Cab le Bo x Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Cable Box’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV. Use the HD/DVD 3 IN connectio[...]

33 Connecting and Setting the TV A UDIO R L A UDIO R L 3 HD/DVD IN A UDIO OUT ( V AR/FIX ) P B Y P R 1080i / 720p / 480p / 480i () Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, P B and P R jacks to the Y, P B and P R [...]

34 IN Connecting a Digital Satellite Receiver with HDMI Connector Use this hookup if: •Y our Digital Satellite Receiver has a High-Definition Multimedia Interface (HDMI). Disconnect all power sources before making any connections. Using an HDMI cable (not supplied), connect the Digital Satellite Receiver’s HDMI OUT connector to the TV’s HDMI [...]

35 Connecting and Setting the TV IN HDMI to DVI-HDTV adapter or cable (not supplied) AUDIO-L (white) AUDIO cable (not supplied) Digital Satellite Receiver Rear of TV AUDIO-R (red) When connecting to a Digital Satellite Receiver’s DVI-HDTV connector If the Digital Satellite Receiver does not have an HDMI connector, you can connect the TV’s HDMI [...]

36 Setting the TV Setting the Channels After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Setup menu appears when you turn your TV on for the first time after installing it. To skip channels, see page 37. 1 Press 1 (Power) on the TV. The Auto Setup menu automatically appears on the screen when you turn o[...]

37 Connecting and Setting the TV To watch VHF/UHF channels with an antenna 1 Press MENU. 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Cable,” then press . 4 Press V / v to select “Off,” then press . 5 Perform steps 3 - 5 in “To perform Auto Program again” on page 36. Note You cannot receive and set the cable [...]

38 To fix in a TV channel If you have connected a cable box or satellite receiver to your TV, and do not intend to connect any other audio or video equipment, it is recommended that you fix a TV channel. Doing so will ensure no accidental channel switch when using your TV. 1 Press MENU. 2 Press V / v to select (Channel), then press . 3 Press V / v [...]

39 Connecting and Setting the TV , To open the menu screen and select the option Press MENU to open the menu screen. Press V / v to select the desired category, then press . To exit the menu screen, press MENU again. Menu category Menu option m Press V / v to select the option, then press b or . (The b button cannot be used on some menus.) (Example[...]

40 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Language,” then press . 4 Press V / v to select your preferred language, then press . 5 Press MENU to exit the menu screen. , , , Return Caption Vision: Off Video Label Language: English Auto YC: Setup TV Select : Bac k: Exit: Set : Setup TV Select : Bac k: Exit: Set : Re[...]

41 Watching the TV MUTING DISPLAY 2 2 3 JUMP 1 Press POWER on the remote control. Tip When the 1 (Power on/Stand by) LED is off, press the 1 (Power) button on the TV. 2 Select the desired channel using the 0 - 9 and ENT (enter) buttons. Press 0 - 9 to select a channel. The channel changes after 2 seconds. Press ENT (enter) to select immediately. Us[...]

42 2 - 4 1, 5 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Caption Vision” then press . 4 Press V / v to select your desired Caption Vision, then press . 5 Press MENU to exit the menu screen. Note When the TV receives a 480p or higher resolution signal, “Caption Vision” cannot be selected. , , , , W atching with cl[...]

43 Watching the TV PICTURE MODE Vivid Standard Pro , Select for enhanced picture contrast and sharpness. Select to display a picture with contrast to suit your room’s lighting conditions. This mode is recommended for normal viewing conditions. Select for professional monitor-like appearance. PICTURE MUTING PICTURE WIDE FAV ORITES TV VIDEO 1/2 VID[...]

44 2 - 4 1, 5 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Effect,” then press . 4 Press V / v to select “SRS WOW” then press . 5 Press MENU to exit the menu screen. Tip Pressing the button also lets you select “SRS WOW ” and “Off.” Notes • You cannot select the Effect mode if “Speaker” [...]

45 Watching the TV Wide Zoom Normal Full Zoom , WIDE MODE WIDE Press WIDE repeatedly until the desired Wide Screen Mode appears. Each time you press the button, the Wide Screen Mode changes as follows: MUTING PICTURE WIDE FAVO R I TES TV VIDEO 1/2 VIDEO 3 VIDEO 4 F1 F2 MENU SLEEP DISPLA Y MODE SA T/ CABLE PO WER RESET MTS/SAP GUIDE TV/SA T D VD/ VC[...]

46 Original source 4:3 source (Standard definition source) Wide Zoom enlarge to fill the screen with minimum distortion Normal display 4:3 picture in original size Full enlarge the original picture horizontally to fill the screen Zoom enlarge the original picture without distorting aspect ratio Note When the TV receives a 720p or 1080i signal, “N[...]

47 Watching the TV 1 Press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select the option you want to set, then press . 4 Press V / v to select the desired screen mode, then press . 5 Press MENU to exit the menu screen. , , , , 2 - 4 1, 5 Return Wide Mode: Wide Zoom 4:3 Default: Wide Zoom V Center: 0 H Center: 0 Screen Sele[...]

48 Tip To change from one Wide Screen Mode to another, use the WIDE button on the remote control. Notes • The 4:3 Default functions only when the TV receives 480i or 480p signals. • If “4:3 Default” is set to anything but “Off,” the Wide Screen Mode setting changes only for the current channel. When you change channels (or inputs), the [...]

49 Watching the TV Using the Freeze Function You can use this feature to write down information such as phone numbers, recipes, etc. Frozen picture FREEZE FREEZE , Call 555-1234 F reeze When the program information you want to capture is displayed, press FREEZE. The picture freezes. Press FREEZE again, and the frozen picture is released, and the pi[...]

50 Setting the Video Inputs You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 24 through 35(Continued). 1 0-9 and ENT (enter) buttons CH +/– 1 For video input 1 and 2 Press VIDEO 1/2 repeatedly until the desired video input appears. Each t[...]

51 Watching the TV Using the Video Label and Skip Feature You can make settings for each video input by choosing the label displayed on the screen. Tip If you select “Skip,” your TV skips this input when you press the Input Select buttons. 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Video Label,” the[...]

52 Using F a v orite Channels You can select program channels from a list of favorite channels that you preset. Setting y our fav orite channels 1, 7 2 - 6 1 Press MENU. 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Favorite Channels,” then press . Tip If you cannot select “Favorite Channels,” change the input to [...]

53 Watching the TV 1 Press FAVORITES. The Favorite Channels list appears. 2 Press V / v to select the desired channel, then press . The selected channel will be displayed. Tip If you make an optional label using “Channel Label” in the (Channel) menu, that label will be displayed on the screen. 1 2 , , ABC Using the Channel Label Feature If you [...]

54 2 Press V / v to select (Channel), then press . 3 Press V / v to select “Channel Label,” then press . 4 Press V / v to select “Channel,” then press . 5 Press V / v to scroll through the channel numbers you want to assign a label, then press . 6 Press V / v to select “Label,” then press . 7 Press V / v to scroll through the label char[...]

55 Using Advanced Features 1 Receive the picture you want to adjust, then press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select “V Center,” then press . 4 Press V / v / B / b to adjust the position, then press . 5 Press MENU to exit the menu screen. Note “V Center” cannot be adjusted when “Normal” or “Full[...]

56 1 Receive the picture you want to adjust, then press MENU. 2 Press V / v to select (Screen), then press . 3 Press V / v to select “H Center,” then press . 4 Press V / v / B / b to adjust the position, then press . 5 Press MENU to exit the menu screen. Tips • “H Center” can be adjusted for every input setting. • The “H Center” is [...]

57 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Video), then press . 3 Press V / v to select “Mode,” then press . 4 Press V / v to select the Picture Mode you want to adjust, then press . 5 Press V / v to select “Picture,” then press . Adjusting the Picture Quality You can adjust the picture quality for each Picture M ode [...]

58 6 Press V / v / B / b to make the desired adjustment, then press . Adjustable options Option Picture Brightness Color Hue* Sharpness Backlight * The adjustment is not available for the following: – 480i, 480p, 1080i and 720p signals input to HD/DVD 3 IN and HDMI 4 IN Tip You can adjust each option by referring to the value beside each option i[...]

59 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select the option you want to adjust, then press . 4 Press V / v / B / b to make the desired adjustment, then press . , , , , Adjusting the Sound Quality You can adjust the sound quality for each video input selected using the Input Select button[...]

60 Option Treble* Bass* Balance* Effect** * To adjust any of these options, set “Speaker” in the (Audio) menu to “On,” or “Audio Out” to “Variable” first. ** To adjust the option, set “Speaker” in the (Audio) menu to “On” first. Tip You can adjust each option by referring to the value beside each option indicator. 5 Repeat s[...]

61 Using Advanced Features Selecting the TV Speaker s or an External Amplifier to Listen to the TV You can select if you want to listen to the TV from the TV speakers or from an external amplifier connected to the TV’s audio outputs. 1, 5 2 - 4 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select “MTS,” then pre[...]

62 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Speaker,” then press . 4 Press V / v to select the desired option, then press . 5 Press MENU to exit the menu screen. Selecting Ho w to Contr ol the V olume of the TV’ s Speaker s You can select how to control the volume of the TV’s speakers when an external amplifier[...]

63 Using Advanced Features Using the P arental Contr ol Feature The TV programs and movies shown on TV are given a rating signal based on the following rating systems. In U.S.A. : U.S. Television Parental Guidelines to rate television programs (U.S. TV ratings), and Motion Picture Association of America (MPAA) Guidelines to rate movies including th[...]

64 Activ ating the P arental Contr ol f eature 1 Press MENU. 2 Press V / v to select (Parent), then press . 3 Enter a four-digit password using the 0 - 9 buttons, then, press . 4 The Parent menu options appear. If you access the Parent menu for the first time, you are requested to enter the password again for confirmation. Note Do not enter “4357[...]

65 Using Advanced Features To view blocked programs You can view blocked programs by entering the password. 1 Press ENT (enter) when tuned to a blocked program. 2 Enter your four-digit password using the 0 - 9 buttons. The Parental Control feature will be canceled temporarily until you turn the TV off. To deactivate the Parental Control feature Set[...]

66 3 Press V / v to select “Movie Rating,” then press . 4 Press V / v to select the rating to be blocked, then press . The indication automatically appears beside the selected rating and all ratings below it, indicating that the programs that match the ratings will be blocked. To unlock a rating, select , then press . The indication changes int[...]

67 Using Advanced Features 7 Press V / v to select the TV rating to be blocked, then press . The indication automatically appears beside the selected rating and all ratings below it, indicating that the programs that match the ratings will be blocked. To unlock a rating, select , then press . The indication changes into “–” and all ratings ab[...]

68 Option Description Allow Block Allows programs and movies that are broadcast without a rating. Blocks all programs and movies that are broadcast without a rating. 9 Repeat step 8 for other extenders. All programs that match the ratings you select and higher, except for the extenders that were canceled, will be blocked. 10 Press MENU to exit the [...]

69 Using Advanced Features U.S. TV ratings U.S. TV ratings are for TV programs rated according to the U.S. Television Parental Guidelines. Option TV-Y (All Children) TV-Y7 (Directed to Older Children) TV-G (General Audience) TV-PG (Parental Guidance Suggested) TV-14 (Parents Strongly Cautioned) TV-MA (Mature Audience Only) Description This program [...]

70 About the extenders of U.S. TV ratings TV-Y7, TV-PG, TV-14 and TV-MA ratings have additional content ratings called “extenders” to define additional viewing limits. The extenders are defined as follows: Option FV (Fantasy Violence) D (sexually suggestive Dialog) L (coarse Language) S (Sexual situations) V (Violence) Description Programs cont[...]

71 Using Advanced Features Canadian French Language ratings The Canadian French Language ratings are for TV programs in French broadcast in Canada. Option G (General) 8 ans+ (8+ General — Not recommended for young children) 13 ans+ (Programming may not suitable for children under the age of 13) 16 ans+ (Programming is not suitable for children un[...]

72 T urning Off the TV A utomatically You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes). SLEEP Press SLEEP repeatedly until the desired period of time appears. Each time you press the button, the period of time changes as follows: While the Sleep timer is activated, the (Timer) LED on [...]

73 Additional Information Problem Possible remedies No picture. Cannot receive any channels. Cannot receive upper channels (UHF) when using an antenna. TV is locked to one channel. Cannot receive any channels when using cable TV. Cannot receive or select channels. The TV turns off automatically. (The TV enters the standby mode.) No picture from som[...]

74 Poor picture. Double images or ghosts. Only snow and noise appear on the screen. Dotted lines or stripes. No color./Dark picture./ Color is not correct. The picture is too bright. Picture (stripe) noise. No sound./Noisy sound. Good picture, no sound. Audio noise. Striped noise during playback/recording of a VCR. Cannot operate menu item. Wide Sc[...]

75 Additional Information Specifications Television system: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna: 75-ohm external terminal for VHF/UHF Screen size (measured diagonally): 23 inches Panel System: LCD (Liquid Crystal Display) Panel Display resolution: 1,366 dots (horizontal) × 768 lines (vertical) VIDEO 1/2 [...]

76 Inde x E Effect .................................................... 44 F Favorite channels .................................. 52 Front and rear connectors ..................... 20 Full ........................................................ 46 H H Center ............................................... 56 I Input select ........................[...]

[...]

[...]

[...]

Printed on 100% recycled paper . Printed in Japan[...]