Français dropdown-ico

Sony MDX-C6500RX manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Sony MDX-C6500RX. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Sony MDX-C6500RX ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Sony MDX-C6500RX décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Sony MDX-C6500RX devrait contenir:
- informations sur les caractéristiques techniques du dispositif Sony MDX-C6500RX
- nom du fabricant et année de fabrication Sony MDX-C6500RX
- instructions d'utilisation, de réglage et d’entretien de l'équipement Sony MDX-C6500RX
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Sony MDX-C6500RX ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Sony MDX-C6500RX et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Sony en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Sony MDX-C6500RX, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Sony MDX-C6500RX, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Sony MDX-C6500RX. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    SERVICE MANUAL AEP Model MDX-C6400R/C6500R/C6500RX UK Model MDX-C6500R/C6500RX SPECIFICA TIONS MDX-C6400R/C6500R/C6500RX Photo: MDX-C6500R Model Name Using Similar Mechanism NEW Base Mechanism T ype MG-164NZ-138 Optical Pick-up Name KMS-241C FM/MW/L W MINIDISC PLA YER MD player section Signal-to-noise ratio 90 dB Frequency response 10 – 20,000 Hz[...]

  • Page 2

    2 Notes on chip component replacement • Ne ver reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be dam- aged by heat. Flexib le Circuit Boar d Repairing • K eep the temperature of the soldering iron around 270 ˚C dur- ing repairing. • Do not touch the soldering iron on the same conductor of the [...]

  • Page 3

    3 SECTION 1 GENERAL This section is e xtracted from instruction manual. Location of controls Refer to the pages listed for details. 1 V olume control dial 19 2 MENU button 8, 10, 12, 13, 14, 15, 16, 18, 19, 21, 24 3 DISC/PRST +/– (cursor up/down) buttons 8, 10, 12, 13, 14, 15, 16, 18, 19, 20, 21, 24 During CD/MD playback: Disc change 10, 13 Durin[...]

  • Page 4

    4[...]

  • Page 5

    5[...]

  • Page 6

    6[...]

  • Page 7

    7[...]

  • Page 8

    8[...]

  • Page 9

    9 SECTION 2 DISASSEMBL Y SUB P ANEL ASS’Y Note: Follo w the disassembly procedure in the numerical order giv en. MECHANISM DECK (MG-164NZ-138) 1 screw (PTT2.6 × 5) 2 cov er 4 claw 3 screw (PTT2.6 × 8) 3 two screws (PTT2.6 × 8) 3 screw (PTT2.6 × 8) 5 sub panel ass’y 4 two claws 6 flexib le flat cable (CNP811) 1 screw (PTT2.6 × 5) 5 mechanis[...]

  • Page 10

    10 SER V O BO ARD MAIN BO ARD 2 two screws (BVTT2 × 4) 1 sensor flexible board (CN102) 2 two screws (BVTT2 × 4) 1 flexible boar d (CN103) 3 servo board 1 three ground point screws 2 three scre ws (PTT2.6 × 10 ) 3 main board[...]

  • Page 11

    11 MD CO VER ASS’Y HEA T SINK 1 four screws (B2 × 3) 3 MD cover ass ’ y 2 Pushing the Cassette Holder in the direction of the arrow A with a screwdriver, etc., disengage the Shaft (MD Cover Guide) from the slot in the MD Cover Assy. Note : Take care not to scratch the optiocal Pick-up when pushing the Cassette Holder with a screwdriver. etc. s[...]

  • Page 12

    12 FLO A T BLOCK LO MO T OR ASS’Y (LO ADING) (M903) 1 tension spring (FLOAT B) 1 tension spring (FLOAT B ) 2 two tension springs (FLOAT F) 3 Pushing an arrow A part, raise the float block up ward at the front to release a lock. A float block lever (lock R) lever (lock L) 4 Remove the bracket (LO) in the direction of the arrow A . bracket (LO) 1 R[...]

  • Page 13

    13 LEVER (LE) ASS’Y HOLDER ASS’Y 2 stopper washer 2 lever (LE) ass ’ y 3 roller (GEAR E) 1 2 type-E stopring 1.5 2 type-E stoprin g 1.5 3 lever (lock L) 2 type-E stopring 1.5 2 type-E stopring 1.5 4 Remove the holder ass ’ y in the direction of the arrow. 1 spring (CHKG) 1 spring (CHKG) 3 lever (lock R)[...]

  • Page 14

    14 OPTICAL PICK-UP (KMS-241C/J1NP) CHUCKING ARM ASS’Y 1 Remove the chucking arm ass ’ y in the direction of the arrow. holder ass ’ y 6 bearing (SL) 5 feed screw ass ’ y 3 screw (K2 × 3) 2 guide shaft (OPT L) 1 two screws (K2 × 3) 7 optical pick-up (KMS-241C/J1NP) 4 screw (B2 × 3)[...]

  • Page 15

    15 SL MO TOR ASS’Y (SLED) (M902), SP MO TOR ASS’Y (SPINDLE) (M901) 4 screw (P1.7 × 1.8) 5 bracket (SL) 9 two screws (P1.7 × 1.8) 0 bracket (SP) qa SP motor ass ’ y (spindle) (M901) 7 screw (B2 × 3) 2 two screws (2 × 8) 3 sensor board 1 Remove solders of motors (M901, M902) 8 base (SL) 6 SL motor ass ’ y (sled) (M902)[...]

  • Page 16

    16 SECTION 3 ELECTRICAL ADJUSTMENTS TEST MODE This set hav e the test mode function. <Set the T est Mode> 1. T urn ON the re gulated po wer supply . (The clock is displayed) Note: Press the [OFF] button, if the clock is not displayed. 2. Push the preset [4] button. 3. Push the preset [5] button. 4. Press the preset [1] button for more than tw[...]

  • Page 17

    MDX-C6400R/C6500R/C6500RX 17 17 SECTION 4 DIA GRAMS 4-1. BLOCK DIA GRAM – SER V O Section – F C B D A E I J J I B A C D E F DETECTOR 1 2 J I 4 5 6 7 A B C D 8 9 E F LD PD LASER DIODE ILCC PD OPTICAL PICK-UP BLOCK (KMS-241C) AUTOMATIC POWER CONTROL Q302 11 10 APC PD LD/PD AMP 12 APCREF I-V AMP I-V AMP AT AMP B.P.F. 29 30 WBL ADFM ADIN 32 ADFG AB[...]

  • Page 18

    MDX-C6400R/C6500R/C6500RX 18 18 4-2. BLOCK DIA GRAM – TUNER Section – 1 2 ANT-FM ANT-AM 53 VSM 56 TUNATT 14 S-METER 10 MPX 8 AM-DET 9 RDS-DET 05 MUTING Q111 MUTING CONTROL SWITCH Q131 MUTING Q121 D131 FM/AM TUNER UNIT TU1 MASTER CONTROLLER IC501 (1/3) 17 SDA (E2PROM) J1 (FM/AM ANTENNA) 5 VCC (8.5V) TUNER +8.7V 16 VDD (5V) TUNER +5.6V 11 VDD E2P[...]

  • Page 19

    MDX-C6400R/C6500R/C6500RX 19 19 4-3. BLOCK DIA GRAM – MAIN Section – 12 9 5 DATA DADT VOUTL VOUTR DADT, BCK, LRCK, FS256 6 BCK BCK LRCK R-CH R-CH 1 XTI 15 17 16 RSTB DM1 DM0 LRCK FS256 EMPHASIS AM IF-AM MPX DATA, CLOCK S-METER LOCK 30 29 1 11 20 3 SEL FD1L AM 12 AMIF 13 MPX DATA CLOCK R-CH A B F CLK CONTROL SOFT MUTE TONE CONTROL LOUDNESS/ VOLU[...]

  • Page 20

    MDX-C6400R/C6500R/C6500RX 20 20 4-4. BLOCK DIA GRAM – BUS CONTROL/PO WER SUPPL Y Section – BU B+ RESET SIGNAL GENERATOR IC652 SIRCS BUFFER Q704 REMOTE CONTROL RECEIVER IC951 BATTERY DETECT Q701 ACCESSORY CHECK Q661 LEVEL SHIFT Q706 6 8 4 CLK ANT+B TU8.7V AMP+B REGULATOR IC671 COM8V TU5.6V 5.6VON SW 8.7VON SW STB CLK IN DATA OUT DATA 2 RST RESET[...]

  • Page 21

    MDX-C6400R/C6500R/C6500RX 21 21 4-5. NO TE FOR PRINTED WIRING BO ARDS AND SCHEMA TIC DIAGRAMS SUB board SENSOR board SER VO board MAIN board KEY board • Circuit Boar ds Location Note on Printed Wiring Board: • X : par ts extracted from the component side . • Y : par ts extracted from the conductor side . • z : Through hole. • f : inter na[...]

  • Page 22

    MDX-C6400R/C6500R/C6500RX 22 22 C306 C308 C311 C314 C310 C305 C304 R319 R312 R311 R308 R307 R306 R305 R304 R303 R302 R301 R316 R317 C328 C331 C320 C322 C324 C347 C330 C516 C329 C321 C327 C326 C325 R501 R502 R503 R532 R527 R528 R526 R529 R347 R355 R336 R344 R345 R343 R338 R340 R342 R511 R506 R516 R531 R535 R539 R518 R538 R517 R525 R356 R337 R348 R34[...]

  • Page 23

    MDX-C6400R/C6500R/C6500RX 23 23 C201 C101 C510 C307 C358 C316 C514 C513 C503 C515 C504 C505 C511 C512 C350 C301 C356 C357 R519 R534 R533 R104 R202 R401 R402 R403 R101 R201 C345 C359 C353 C317 C309 C362 C302 R332 R334 R333 R335 R512 R510 R540 R542 R520 R521 R359 Q402 BC E B C E Q403 C333 RB301 RB302 TH501 RB503 IC307 L501 L301 1 5 9 13 26 22 18 14 C[...]

  • Page 24

    MDX-C6400R/C6500R/C6500RX 24 24 4-8. SCHEMA TIC DIA GRAM – SER VO Boar d (1/2) –• See page 31 for W aveforms. • See page 36 for IC Bloc k Diagrams. • V oltages and wav eforms are dc with respect to ground under no-signal conditions. no mark : MD PLA Y ∗ : Impossible to measure The components identified by mark 0 or dotted line with mark[...]

  • Page 25

    MDX-C6400R/C6500R/C6500RX 25 25 4-9. SCHEMA TIC DIA GRAM – SER V O Boar d (2/2) –• See page 31 f or W a veforms. • See page 36 for IC Bloc k Diagram. • V oltages and wavef or ms are dc with respect to ground under no-signal conditions. no mark : MD PLA Y ∗ : Impossible to measure (Page 29)[...]

  • Page 26

    MDX-C6400R/C6500R/C6500RX 26 26 D1 E-9 D301 G-5 D501 I-7 D502 H-7 D551 J-13 D552 K-13 D553 K-13 D554 J-12 D555 K-13 D556 J-12 D557 K-13 D558 J-12 D559 K-13 D560 J-12 D571 B-5 D603 B-4 D605 B-5 D611 B-7 D612 B-7 D613 C-7 D614 C-7 D615 C-7 D616 C-7 D617 C-6 D618 C-6 D622 D-9 D623 C-9 D624 C-9 D653 I-7 D661 D-5 D662 D-5 D673 C-5 D674 C-5 D701 E-5 D702[...]

  • Page 27

    MDX-C6400R/C6500R/C6500RX 27 27 D2 E-7 D90 H-11 D91 H-11 D92 G-11 D131 F-12 D302 G-7 D361 I-2 D362 G-2 D561 K-11 D562 K-11 D563 K-13 D564 K-12 D601 C-3 D602 B-4 D604 A-5 D621 B-10 D631 J-2 D671 C-5 D672 C-5 D675 I-4 D676 I-4 D677 I-4 D709 G-5 IC611 A-7 IC671 F-1 Q90 G-11 Q121 E-12 Q361 H-1 Q362 G-1 Q631 J-2 5 4 8 7 6 2 1 3 (FRONT VIEW) 9 10 11 12 1[...]

  • Page 28

    MDX-C6400R/C6500R/C6500RX 28 28 4-12. SCHEMA TIC DIA GRAM – MAIN Board (1/3) –• See page 31 f or Wa vef orm. • See pag e 36 for IC Bloc k Diagrams. • V oltages and wavef orms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM () : M W [] : L W (Page 29) (Page 30)[...]

  • Page 29

    MDX-C6400R/C6500R/C6500RX 29 29 • V oltages and wavef or ms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM () : M W [] : L W 〈〈 〉〉 : MD PLA Y ∗ : Impossible to measure 4-13. SCHEMA TIC DIA GRAM – MAIN Board (2/3) –• See page 31 f or W aveforms. (Page 25) (Page 28) (Page 30)[...]

  • Page 30

    MDX-C6400R/C6500R/C6500RX 30 30 4-14. SCHEMA TIC DIA GRAM – MAIN Board (3/3) –• See page 36 f or IC Block Diagrams. • V oltages are dc with respect to ground under no-signal (detuned) conditions. no mark : FM 〈〈 〉〉 : MD PLA Y (Page 28) (Page 29) (Page 33)[...]

  • Page 31

    MDX-C6400R/C6500R/C6500RX 31 31 • W aveforms – SER V O Board – 1 IC101 1 (XTI) (MD Play Mode) 2 IC101 4 (LRCK) (MD Play Mode) 3 IC101 6 (BCK) (MD Pla y Mode) 7 IC301 wj (FS256) (MD Pla y Mode) 8 IC301 tg (RFI), IC302 ek (RF) (MD Play Mode) 9 IC301 yg (FE), IC302 ef (FE) (MD Pla y Mode) 0 IC301 uf (TE), IC302 wh (TE) (MD Pla y Mode) qa IC302 1[...]

  • Page 32

    MDX-C6400R/C6500R/C6500RX 32 32 4-15. PRINTED WIRING BO ARD – SUB Board –• See page 21 for Cir cuit Boards Location. (Page 27) (Page 34)[...]

  • Page 33

    MDX-C6400R/C6500R/C6500RX 33 33 4-16. SCHEMA TIC DIA GRAM – SUB Board – (Page 30) (Page 35)[...]

  • Page 34

    MDX-C6400R/C6500R/C6500RX 34 34 4-17. PRINTED WIRING BO ARD – KEY Board –• See page 21 for Cir cuit Boards Location. • Semiconductor Location Ref. No. Location IC951 C-5 LED901 A-2 LED902 C-2 LED903 C-3 LED904 A-3 LED910 B-12 LED911 B-12 LED912 A-12 LED913 A-5 LED914 B-5 LED915 B-5 • Semiconductor Location Ref. No. Location D901 A-11 D902[...]

  • Page 35

    MDX-C6400R/C6500R/C6500RX 35 35 4-18. SCHEMA TIC DIA GRAM – KEY Board –• See page 31 f or Wa veform. • V oltages and wav eforms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM (Page 33)[...]

  • Page 36

    MDX-C6400R/C6500R/C6500RX 36 36 • IC Block Dia grams – SER V O Board – IC101 PCM1718E/2K INPUT INTERFACE DIGITAL FILTER 5 LEVEL DAC LOWPASS FILTER CMOS AMP 1 XTI 2 DGND 3 VDD 4 LRCIN 5 DIN 6 BCKIN 7 ZERO 8 D/C_R 9 VOUTR 10 AGND NOISE SHAPER 5 LEVEL DAC LOWPASS FILTER CMOS AMP CLK CONTROL MODE CONTROL 20 XTO 19 CLKO 18 MUTE 17 DM1 16 DM0 15 RS[...]

  • Page 37

    37 IC303 BH6511FS-E2 IC305 BA6287F 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 123456789 10 11 12 13 14 15 16 GND VG IN4R IN4F VM4 OUT4F PGND4 OUT4R VM34 OUT3R PGND3 OUT3F VM3 IN3F IN3R PSB CAPA– CAPA+ IN2R IN2F VM2 OUT2F PGND2 OUT2R VM12 OUT1R PGND1 OUT1F VM1 IN1F IN1R V DD CHARGE PUMP. OSC INTERFACE AMP INTERFACE AMP AMP INTERFACE PREDRIVE [...]

  • Page 38

    38 – MAIN Boar d – IC51 SAA6588T/V2-118 SCOUT MRO MPTH TCON OSCO OSCI VSSD VDDD DAVN SDA VREF MPX VSSA VDDA AFIN MAD PSWN SCL 2 1 6 15 11 13 16 14 12 INTERFACE REGISTER SIGNAL QUALITY DECODER CLOCKED COMPARATOR POWER SUPPLY & RESET TEST CONTROL OSCILLATOR & CLOCK PAUSE DETECTOR MULTI PATH DETECTOR 57kHz 8th ORDER BAND-PASS FILTER RDS/RD[...]

  • Page 39

    39 IC151 TD A7402TR 34 35 36 37 38 39 40 41 42 43 44 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 16 15 14 13 12 1 2 3 4 5 6 7 8 9 10 11 INPUT MULTIPLEXER MAIN SOURCE SELECTOR MIXING SELECTOR SECOND SOURCE SELECTOR MAIN PHONO MAIN CH0 AUX AM FM IN-GAIN +AUTO ZERO + LOUDNESS SOFTMUTE VOLUME TREBLE BASS HP LP COMPANDER VOICE BANDPASS MUTE IN-GAIN [...]

  • Page 40

    40 4-19. IC PIN FUNCTION DESCRIPTION • SERVO BOARD IC301 CXD2652AR Pin No. Pin Name I/O Description 1 MNT0 O Focus OK signal output to the MD mechanism controller (IC501) “H” is output when focus is on (“L”: NG) 2 MNT1 O Track jump detection signal output to the MD mechanism controller (IC501) 3 MNT2 O Busy monitor signal output to the MD[...]

  • Page 41

    41 Pin No. Pin Name I/O Description 46 D1 I/O 47 D0 I/O 48 D2 I/O 49 D3 I/O 50 MVCI I Digital in PLL oscillation input from the external VCO Not used (fixed at “L”) 51 ASYO O Playback EFM full-swing output terminal 52 ASYI I (A) Playback EFM asymmetry comparator voltage input terminal 53 AVDD — Power supply terminal (+3.3V) (analog system) 54[...]

  • Page 42

    42 Pin No. Pin Name I/O Description 89 FRDR O Focus servo drive PWM signal ( – ) output to the BH6511FS (IC303) 90 FS4 O Clock signal (176.4 kHz) output terminal (X ’ tal system) Not used (open) 91 SRDR O Sled servo drive PWM signal ( – ) output to the BH6511FS (IC303) 92 SFDR O Sled servo drive PWM signal (+) output to the BH6511FS (IC303) 9[...]

  • Page 43

    43 • SERVO BOARD IC302 CXA2523AR (RF AMP, FOCUS/TRACKING ERROR AMP) Pin No. Pin Name I/O Description 1I I I-V converted RF signal I input from the optical pick-up block detector 2J I I-V converted RF signal J input from the optical pick-up block detector 3V C O Middle point voltage (+1.65V) generation output terminal 4 to 9 A to F I Signal input [...]

  • Page 44

    44 • SERVO BOARD IC501 CXP84340-217Q (MD MECHANISM CONTROLLER) Pin No. Pin Name I/O Description 1 to 5 TIN3 to TIN7 I/O Input of the 4 × 8 matrix test keys ( “ L ” is always output, except in test mode) Not used (open) 6 LOAD O Loading motor control signal output to the motor driver (IC305) “ H ” active *1 7 EJECT O Loading motor control[...]

  • Page 45

    45 Pin No. Pin Name I/O Description 47 UNIREQ O Data request signal output terminal (for SONY bus) “ H ” : request on Not used (open) 48 UNICKIO I/O Serial clock signal input from the master controller (IC501) or serial clock signal output to the SONY bus interface (IC701) and master controller (IC501) (for SONY bus) 49 UNISI I Serial data inpu[...]

  • Page 46

    46 • MAIN BOARD IC501 MB90574PMT-G-266-BND (MASTER CONTROLLER) Pin No. Pin Name I/O Description 1 TUNON O Tuner system power supply on/off control signal output to the BA4908 (IC671) “ H ” : tuner power on 2 ANT CUT O Tuner system power supply on/off control signal output terminal “ H ” : tuner power on Not used (open) 3 BUSON O Bus on/of[...]

  • Page 47

    47 Pin No. Pin Name I/O Description 43 AVRH I Reference voltage (+5V) input terminal (for A/D converter) 44 AVRL I Reference voltage (0V) input terminal (for A/D converter) 45 AVSS — Ground terminal (for analog system) 46 KEYIN0 I Key input terminal (A/D input) (LSW901 to LSW908, S901 to S904) OFF, SOURCE, SOUND, MENU, PTY DSPL, LIST, ENTER, MODE[...]

  • Page 48

    48 Pin No. Pin Name I/O Description 78 ILLIN I Auto dimmer control illumination line detection signal input terminal “ H ” is input at dimmer detection Not used (fixed at “ L ” ) 79 TELATT I Telephone detection signal input terminal At input of “ H ” , the signal is attenuated by – 20 dB Used for the MDX-C6500R/C6500RX only (MDX-C6400[...]

  • Page 49

    49 Pin No. Pin Name I/O Description 116 DOLON I/O Dolby control in/out terminal At initial mode: valid/invalid selection input of dolby function (valid at “ L ” input) At normal mode: dolby on/off control signal output terminal (dolby on at “ H ” output) Not used this function (open) 117 TAPATT O Audio signal select control signal output te[...]

  • Page 50

    50 #10 #10 #10 #1 #1 F ront panel section CNP811 1 5 6 7 8 #12 #4 #4 #11 #11 #11 #11 #3 #3 #3 #2 C6500R/ C6500RX FU601 4 3 2 10 9 12 11 15 22 21 16 18 19 A B A B 14 13 MG-164NZ-138 17 not supplied TU1 (1) GENERAL SECTION SECTION 5 EXPLODED VIEWS The components identified by mark 0 or dotted line with mark 0 are critical for safety . Replace only wi[...]

  • Page 51

    51 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark (2) FRONT P ANEL SECTION 51 69 68 67 52 65 66 54 53 55 56 59 LCD901 60 61 62 63 64 not supplied (KEY board) #13 51 3-041-010-01 BUTTON (1-6/M) (MODE. 1. 2. 3. 4. 5. 6) 52 3-040-987-01 BUTTON (OFF) 53 3-040-986-01 BUTTON (MENU/SOUND) 54 3-041-003-01 BUTTON (LIST/ENTER) (DSP[...]

  • Page 52

    52 (3) MECHANISM DECK SECTION-1 (MG-164NZ-138) #5 #6 #6 #8 #6 #6 101 110 109 107 106 105 104 103 102 118 117 116 115 114 113 112 111 103 105 104 111 108 109 109 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 101 A-3326-036-A SERVO BOARD, COMPLETE * 102 X-3376-799-1 CHASSIS ASSY , MD 103 3-032-714-02 SPRING (FLOAT F), TE[...]

  • Page 53

    53 151 2-626-617-01 SCREW (2X8) 152 A-3326-034-A SENSOR BOARD, COMPLETE 153 1-654-693-11 SENSOR FLEXIBLE BOARD 154 3-919-283-01 BRACKET (SL) * 155 3-032-704-01 BASE (SL) 156 3-919-297-01 BRACKET (SP) 157 A-3301-750-A CHASSIS (OP) ASSY 158 3-032-660-01 BRACKET (LO) 159 3-032-669-01 SPRING (RACK), TENSION * 160 3-032-705-01 BEARING (SL) (4) MECHANISM[...]

  • Page 54

    54 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark KEY SECTION 6 ELECTRICAL P ARTS LIST NO TE: • Due to standardization, replacements in the parts list may be different from the parts speci- fied in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may hav e some difference f[...]

  • Page 55

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 55 KEY LSW906 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (LIST) (AMBER) LSW906 1-762-619-21 SWITCH, KEY BOARD (WITH LED) (LIST) (GREEN) LSW906 1-771-476-11 SWITCH, KEY BOARD (WITH LED) (LIST) (RED) LSW907 1-762-617-21 SWITCH, KEY BOARD (WITH LED) (ENTER) (AMBER) LSW907 1-762-6[...]

  • Page 56

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 56 KEY MAIN R976 1-216-815-11 MET AL CHIP 330 5% 1/16W R977 1-216-815-11 MET AL CHIP 330 5% 1/16W R980 1-216-864-11 MET AL CHIP 0 5% 1/16W R999 1-216-864-11 MET AL CHIP 0 5% 1/16W < ROT ARY ENCODER > RE901 1-475-014-12 ENCODER, ROT ARY (VOLUME/BASS/TREBLE/ BALANCE/F ADE[...]

  • Page 57

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 57 MAIN C502 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C503 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C504 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C505 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C506 1-163-235-11 CERAMIC CHIP 22PF 5% 50V C507 1-163-235-11 CERAMIC CHIP 22PF 5% 50V C5[...]

  • Page 58

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 58 MAIN D703 8-719-056-82 DIODE UDZ-TE-17-6.2B D704 8-719-056-93 DIODE UDZ-TE-17-18B D705 8-719-056-93 DIODE UDZ-TE-17-18B D706 8-719-072-70 DIODE MA2ZD14001S0 D708 8-719-073-01 DIODE MA111-TX D709 8-719-073-01 DIODE MA111-TX D710 8-719-073-01 DIODE MA111-TX < COIL > FB[...]

  • Page 59

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 59 MAIN R131 1-216-037-00 MET AL CHIP 330 5% 1/10W R132 1-216-045-00 MET AL CHIP 680 5% 1/10W R141 1-216-025-00 RES, CHIP 100 5% 1/10W R142 1-216-073-00 MET AL CHIP 10K 5% 1/10W R152 1-216-841-11 MET AL CHIP 47K 5% 1/16W R153 1-216-025-00 RES, CHIP 100 5% 1/10W R154 1-216-025[...]

  • Page 60

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 60 < SWITCH > SW503 1-692-431-21 SWITCH, TACTILE (RESET) SW504 1-771-540-11 SWITCH, PUSH (1KEY) (NOSE DETECT) < THERMISTOR > TH701 1-803-350-21 THERMISTOR, POSITIVE < TUNER > TU1 A-3220-812-A TUNER UNIT (TUX-020) < VIBRA TOR > X51 1-579-242-41 VIBRA TO[...]

  • Page 61

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 61 SER V O < FERRITE BEAD > FB301 1-414-235-22 FERRITE BEAD INDUCTOR CHIP 0uH FB302 1-414-760-21 FERRITE BEAD INDUCTOR CHIP 0uH < IC > IC101 8-759-571-84 IC PCM1718E/2K IC301 8-752-384-47 IC CXD2652AR IC302 8-752-080-95 IC CXA2523AR IC303 8-759-430-25 IC BH6511FS-[...]

  • Page 62

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 62 R524 1-216-821-11 MET AL CHIP 1K 5% 1/16W R525 1-216-845-11 MET AL CHIP 100K 5% 1/16W R526 1-216-825-11 MET AL CHIP 2.2K 5% 1/16W R527 1-216-825-11 MET AL CHIP 2.2K 5% 1/16W R528 1-216-825-11 MET AL CHIP 2.2K 5% 1/16W R529 1-216-825-11 MET AL CHIP 2.2K 5% 1/16W R530 1-216-[...]

  • Page 63

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 63 501 502 ADAPTER, ANTENNA × 1 FRAME × 1 COLLAR × 1 +K5 × 8 × 2 SPRING, FITTING × 2 505 506 503 SCREW , FITTING × 1 BUSHING × 1 507 POWER CORD × 1 P ARTS FOR INST ALLA TION AND CONNECTION ************************************* 501 1-465-459-21 ADAPTER, ANTENNA 502 3-[...]

  • Page 64

    REVISION HIST OR Y Clicking the ver sion allows y ou to jump to the revised page. Also, clicking the v ersion at the upper right on the re vised page allows you to jump to the ne xt revised page. V er . Date Description of Revision 1.2 2001.12 Change of Par t No. for TU1 (RPC-01002) 1.1 2001.05 Change of Par t No. for SPRING, FITTING (ECN-CSA04727)[...]