Sony VGCRA930 manuel d'utilisation

Welcome Thank you for purchasing a Sony VAIO ® computer! Your new computer is a superb blend of high technology and easy-to-use functionality. The information provided here is designed to help you to become familiar with the hardware and software programs included with your computer.  View the Electronic Flyer , which provides updates and suppl[...]

Getting Started Congratulations on your purchase of the Sony VAIO ® computer! Your new, high-performance, multimedia computer combines state-of-the-art computer functionality with the latest audio, video and information technology features.  Unpacking Your Computer  Planning an Ergonomic Work Space Page 2[...]

Unpacking Your Computer Your computer may not be supplied with all of the accessories shown, depending on the computer configuration purchased. For details on the accessories supplied with your computer, see the online Specifications sheet. Your VAIO ® computer is not supplied with System or Application Recovery CDs. Use the VAIO Recovery Wizard u[...]

2. Go to the Sony online support Web site at http://www.sony.com/pcsupport . 3. Click the Documentation button and follow the on-screen instructions to locate your model's specifications sheet. Creating CDs or DVDs with Sony software  Create picture & video with: DVDs with Click to DVD software — Make picture or personal video DVDs. U[...]

Planning an Ergonomic Work Space Before you set up your new computer, find the best location for your new computer and plan your work space. There are several ergonomic factors to consider when you arrange your work space:  Stable work surface — Use a stable work surface large enough to support the computer and other peripheral equipment.  [...]

Locating Controls And Ports This section is intended to familiarize you with the controls, ports and jacks on your computer and supplied accessories. Your computer may not be equipped with all of these hardware features or accessories. The location of the controls, ports, and jacks may vary from the illustrations shown in this section. To view the [...]

About the Front Panel The front panel of your VAIO ® Computer enables access to drives, memory card readers, ports and jacks that enable you to connect compatible peripheral devices. Page 7[...]

Front panel Your computer may not be equipped with all of these hardware features or accessories. The location of the controls, ports, and jacks may vary from the illustrations shown in this section. Front panel 1 Optical drive 1 See the online Specifications sheet for optical drive information. 2 Optical drive 2 See the online Specifications sheet[...]

6 Optical drive access indicator Light is amber while reading and writing data from and to the optical drives. 7 Hard disk drive access indicator Light is amber while reading and writing data from and to the hard disk. 8 Headphones/Line In jack | Connection for the supplied speakers, optional headphones, or audio device. Microphone jack Connection [...]

13 Secure Digital (SD)/MultiMediaCard (MMC) slot Reads and writes data from and to a Secure Digital (SD) or MultiMediaCard (MMC). 14 Media access indicator 1 Light is amber when reading or writing data 15 Power button and power indicator Press the button to turn the computer on and off. The power indicator light is green when the computer is on and[...]

Page 11[...]

About the Back Panel The back panel of your computer contains the ports for supplied and optional accessories. The icons on the back panel locate and identify the ports on your computer. Page 12[...]

Back panel The location of certain ports and jacks may vary from the illustration, based on the computer model purchased. Back panel 1 Mouse port Connection for a PS/2 ® mouse. 2 Keyboard port Connection for a PS/2 keyboard. 3 Printer port Connection for a parallel device, such as a printer or scanner. 4 i.LINK 6-pin S400 port (IEEE 1394) Connecti[...]

6 Microphone jack Connection for a microphone (optional). Front/Headphones jack Connection for the supplied speakers (2-channel), front speakers (5.1 speaker system 1 ), or optional headphones. Line In jack Connection for an audio device. Woofer/Center jack 2 Connection for a Sub-woofer 3 , control module, or center speaker (5.1 speaker system 1 ) [...]

Connection for a 10BASE-T/100BASE-TX/1000BASE-T Ethernet. (The port marked with (Network) is for LAN connections only.) 12 Speaker DC Out jack Connection for the speaker power cable (2-channel speakers). 13 Composite audio R In jack Connection for an audio cable (optional). Composite audio L In jack Connection for an audio cable (optional). Composi[...]

About the Sub-woofer Certain VAIO ® computers are supplied with a sub-woofer unit to enhance your computer's sound capability. See your computer's online specifications sheet for information about supplied accessories. Go to the Sony online support Web site at http://www.sony.com/pcsupport . Page 16[...]

Sub-woofer unit The sub-woofer is compatible with the speakers supplied with your VAIO computer. See the section, To connect a sub-woofer unit , for connecting instructions. Sub- woofer unit 1 Port The port extends the low frequency response to extend the volume output of the sub-woofer unit. 2 Power knob/volume control Rotate the knob clockwise to[...]

About the Keyboard This section describes the special and standard functions available for your keyboard. A wireless or PS/2 ® 1 keyboard may be supplied with your VAIO ® computer, based on the computer model purchased. See your computer's specifications sheet for details on your computer's supplied accessories. 1 A P S/2 ® keyboard is[...]

About the wireless keyboard Set up your wireless keyboard and insert the batteries before attempting to establish communication between the keyboard and the computer. For instructions, see the section, Connecting a Wireless Keyboard. Wireless keyboard (bottom ) 1 Keyboard feet Extend the feet to adjust the keyboard height. 2 CONNECT button Press to[...]

KEY DESCRIPTION Function The 12 function keys along the top of the keyboard are used to perform certain tasks. The task associated with each function key may vary between software programs. Numeric keypad Use the numeric keypad area to type numbers or to perform basic math calculations. Press the Num Lock key to activate the numeric keypad. (The Nu[...]

About the VAIO keyboard with Media Center features Certain VAIO ® computers are supplied with a keyboard 1 that has a standard key arrangement with additional keys and controls that support Microsoft ® Windows ® XP Media Center Edition features. VAIO keyboard BUTTON DESCRIPTION EJECT 1 Opens and closes the optical drive 1 tray. EJECT 2 Opens and[...]

NEXT Advances to the next DVD chapter, video track, or audio track. VOLUME knob Increases (+) and decreases (-) the volume as you turn the knob. MUTE Turns the sound off. Press again to restore sound. STANDBY Places the computer in Stand by mode to reduce power consumption. Press any key briefly to resume normal operation. 1 T his is a P S/2 ® key[...]

About the Wireless Mouse Your VAIO ® computer may be supplied with a wireless mouse 1 . Before attempting to use the wireless mouse with your computer, see the section, Connecting the Wireless Mouse. Wireless m ouse (top) 1 Left mouse button Press to perform specific mouse functions. 2 Wheel Rotate the wheel to scroll up or down on the LCD screen.[...]

Insert two AA batteries (supplied) into the wireless mouse as shown. You can check your mouse's battery power level by clicking (wireless mouse icon), located in the Windows ® taskbar notification area. Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery. [...]

About the Wireless Mouse Your VAIO ® computer may be supplied with a wireless mouse 1 . Before attempting to use the wireless mouse with your computer, see the section, Connecting the Wireless Mouse. Wireless m ouse (top) 1 Left mouse button Press to perform specific mouse functions. 2 Wheel Rotate the wheel to scroll up or down on the LCD screen.[...]

Insert two AA batteries (supplied) into the wireless mouse as shown. You can check your mouse's battery power level by clicking (wireless mouse icon), located in the Windows ® taskbar notification area. Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery. [...]

About the Remote Control The Media Center remote control is supplied with VAIO Digital Studio ® computers that are equipped with the Microsoft ® Windows ® XP Media Center Edition operating system. Page 27[...]

R emote control The remote control can start and stop video recording and playback, select channels, and set viewing preferences. This section describes the basic functions of your remote control. Rem ote Control 1 MY MUSIC button Press to view and listen to your music playlists. 2 MY TV button Press to view the My TV menu. 3 STOP button Press to s[...]

Press to fast-forward media at three speeds. SKIP button Press to move media forward, for example, one audio track, one DVD chapter, and 30 seconds of recorded TV or video. REPLAY button Press to move media backward, for example, one audio track, one DVD chapter, and seven seconds of TV or video. REW button Press to move media backward at two speed[...]

10 STANDBY button Press to place the computer in Stand by mode to reduce power consumption. 11 MY PICTURES button Press to view pictures or a slide show. 12 MY VIDEOS button Press to view videos from your video collection. 13 MORE button Press to view additional options that are available for Media Center features. 14 Directional arrow buttons Pres[...]

Press to activate feature or action, such as channel selection or return to previous channel. (This button's actions are similar to using the OK button.) Page 31[...]

Setting up the remote control 1. Turn the remote control over. 2. Press in the tab and lift the battery cover up. 3. Insert two AA batteries (supplied) into the remote control as shown. 4. Align the battery cover to the remote control. 5. Press down until the cover clicks into place. Inserting batteries into the rem ote control If your remote contr[...]

About the i.LINK Port Your VAIO ® computer is equipped with a 4-pin and a 6-pin i.LINK ® port. A 4-pin i.LINK port cannot supply power to a connected i.LINK device. A 6-pin i.LINK port can supply power (10V to 12V) to a connected i.LINK device, if the device is equipped with a 6-pin connector. The total power supplied by the 6-pin i.LINK port doe[...]

Connecting an i.LINK (IEEE 1394) device 1. Use the symbol to locate the i.LINK port on your compatible i.LINK device and on your computer. Plug the i.LINK cable connector into this port. 2. Plug the other end of the cable into the corresponding 4- or 6-pin i.LINK port on your computer. See the instructions supplied with your i.LINK device for more [...]

Setting Up Your Computer Your computer may not be equipped with all of the hardware features described in the section. The location of the controls, ports, and jacks may vary from the illustrations shown. See the online Specifications sheet for your computer's specific hardware configuration.  Connecting a Display (Monitor)  Connecting a[...]

Connecting a Display (Monitor) 1. Plug the display's cable into the appropriate monitor port. 2. If necessary, plug the display's cable into the rear of the display. To connect a display Install your equipment so that you can easily reach the power outlet in the event of an emergency. Page 36[...]

Connecting a Wireless Keyboard Your VAIO ® computer is supplied with a wireless keyboard. Before attempting to use the wireless keyboard, you must enable communication between the computer and the keyboard. To connect your wireless keyboard, it must be within 11 inches of the computer 1 When attempting to connect the wireless keyboard, confirm tha[...]

Connecting the Wireless Mouse Your VAIO ® computer is supplied with a wireless mouse. Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse. To connect your wireless mouse, it must be within 11 inches of the computer. When attempting to connect the wireless mouse, confirm that the AA batterie[...]

Connecting a Keyboard and Mouse Your VAIO ® computer may be supplied with a PS/2 ® keyboard and mouse. For details on the accessories supplied with your computer, see the online Specifications sheet. 1. Plug the keyboard cable into the keyboard port on the back of the computer. 2. Plug the mouse cable into the mouse port on the back of the comput[...]

Connecting the Speakers Certain VAIO ® computer models are supplied with 2-channel speakers, while other models are supplied with a sub-woofer unit or 5.1 speaker systems 1 . Go to the Sony online support Web site at http://www.sony.com/pcsupport to view your computer's specifications sheet. To connect 2-channel speakers 1. Plug the cable att[...]

2. Insert the mini stereo plug from the sub-woofer unit's cable into the Headphones jack, located on the back panel of your computer. You can also plug the sub-woofer's mini stereo plug into the headphones jack located on the lower front panel of your computer. 3. Plug the sub-woofer unit's power cord into a grounded AC wall outlet o[...]

Connecting 5.1 (6-Channel) Speaker Systems Certain VAIO ® computers are supplied with a 5.1 channel speaker system, or you may wish to use your 5.1 (6-channel) speaker system. Speaker configuration can vary, depending on the speaker components used. To set up the speakers with your computer:  Match the color of the mini stereo plugs (speaker sy[...]

Configuring Software for Your Speaker System When using 5.1 channel (digital or analog) speaker systems, certain software programs require setting changes to enable proper audio performance. To configure RealTek ® Sound Effect Manager software For 6 channel-analog speakers 1. Click Start in the Windows ® taskbar, and then click Control Panel . 2.[...]

To configure WinDVD software 1. Click Start in the Windows ® taskbar, and point to All Programs . 2. Point to InterVideo WindDVD 5 , and the click on InterVideo WinDVD 5 for VAIO . The InterVideo WinDVD for VAIO window opens. 3. Right-click in the WinDVD window. A shortcut menu appears. 4. Click Setup... , to view the Setup dialog box. 5. Select t[...]

Connecting the Infrared Receiver The infrared receiver enables your VAIO ® computer to communicate with the wireless keyboard and mouse 1 . To connect the infrared receiver 1. Plug the infrared receiver unit to a USB port located on either the front or back panel of your computer. 2. Press the CONNECT button on the bottom of the infrared receiver,[...]

Connecting the Telephone and Modem Your computer is equipped with a single modem line jack to connect your installed modem with your telephone wall jack. To use your wall jack for both telephone and modem lines, purchase an additional RJ-11 telephone cable and a "1-to-2" jack adapter device (splitter). To connect the modem 1. Unplug your [...]

Connecting the Power Cords 1. Plug the power cord into the back of the computer. 2. Plug both the display and computer power cords into a grounded AC wall outlet or a power strip. To connect the power cords Page 47[...]

Turning On Your Computer When you start your computer for the first time, your computer may detect new equipment and display a dialog box that prompts you to restart your computer. Respond to this prompt immediately. Before turning on your computer, set up the cables and connections required to use Microsoft ® Windows ® XP Media Center Edition fe[...]

Setting Up Media Center Your VAIO Digital Studio ® computer has the Microsoft ® Windows ® XP Media Center Edition operating system to enhance your computing experience. Media Center provides you with a wide range of TV, DVD, and video viewing, as well as music recording and playback. This section describes how to set up your TV, set-top box, and[...]

Setting Up TV Connections The best method of connecting your computer, TV monitor or display, and TV programming access, is determined by the type of cable service connection available in your home. Your computer's hardware configuration may vary from the illustrations shown in this section. See the online Specifications sheet for details abou[...]

Connecting to standard cable access (CATV) Option 1 1. Connect one end of the TV coaxial cable (supplied) to your cable service access. 2. Connect the other end of the TV coaxial cable to the VHF/UHF port on the back panel of your computer. To connect in CATV m ode (Option 1) Option 2 1. Connect one end of a TV coaxial cable (optional) to your cabl[...]

Connecting to a standard antenna (air) system You can connect your computer to an indoor/outdoor antenna system, using Option 1 or 2 from the previous section, Connecting to standard cable access (CATV) The antenna system in your home may require a VHF/UHF RF combiner/transformer (optional) to connect your computer and the indoor/outdoor antenna sy[...]

Connecting a cable or satellite set-top box You can connect your computer to cable or satellite service that requires a set-top box. Option 1 1. Connect one end of a TV coaxial cable (optional) to your cable service access. Connect the other end to the In jack on the back panel of your set-top box. 2. Connect a second TV coaxial cable (optional) to[...]

You can connect your computer to a set-top box using an S-video cable (optional) and an audio cable (optional) instead of a stereo A/V dubbing cable (optional). See Connecting Other Devices. Page 54[...]

Connecting the Remote Sensor and Remote Sensor Control The remote sensor communicates with the Media Center remote control, enabling you to change channels and to perform other functions. If you are using a cable or satellite set-top box, you can attach the remote sensor control which enables you to control the set-top box with the Media Center rem[...]

To connect the remote sensor 1. Connect the remote sensor unit to a USB port located on either the front or back panel of your computer. 2. Position the remote sensor to enable unobstructed communication with your remote control. Connecting the rem ote sensor (back panel) Page 56[...]

To connect the remote sensor control 1. Plug the remote sensor control's cable into either jack (1 or 2) located on the back of the remote sensor. When you attach the remote control sensor to a cable or satellite set-top box, you can control the set-top box functions with your remote control. Connecting the rem ote sensor and rem ote sensor co[...]

Connecting Other Devices This section illustrates how to connect other devices to your VAIO Digital Studio ® computer. Your computer has both audio and video connection capability. You can locate the appropriate connections on the back panel or behind the lower bottom panel on the front of the computer. You can connect a VCR or camcorder, using th[...]

Connecting a TV monitor (display) 1. Connect the video connector end of the video cable adapter (optional) to the TV Out (S-video/video) jack on the back panel of your computer. 2. Connect the jack end of the video cable adapter to either end of a video cable (optional). Connect the other end of the video cable to the Video-In jack on your TV monit[...]

Registering Your Computer Register your computer and take advantage of Sony's commitment to quality customer support 1 . About the benefits of registering with Sony  Sony Customer Support — Communicate with a Support Representative to troubleshoot problems you may be having with your computer.  Limited warranty — Protect your investm[...]

Turning Off Your Computer Follow these steps when you are ready to turn off your computer for an extended period of time. To avoid loss of data, do not use the Power button to turn off the computer. To turn off your computer 1. Click Start in the Windows ® taskbar, then select Turn Off Computer . The Turn Off Computer dialog box appears. 2. Select[...]

Using Memory Cards and Memory Card Readers This section provides basic information about using your computer's installed memory card readers. Your computer may not be equipped with all of the memory card readers described in this section, depending on the computer model or configuration purchased. To view the installed hardware configuration f[...]

About Your Memory Card Readers Your VAIO ® computer is equipped with memory card readers 1 that are compatible with many popular types of memory cards. You can use your computer's memory card readers to transfer data between digital cameras, camcorders, music players, and other audio/video devices. Mem ory card readers and com patible m edia [...]

Inserting a Memory Card Your memory card reader(s) may be located behind a protective cover on the front of the computer. The style and location of front panel cover varies, depending on the computer model purchased. Certain VAIO ® computers do not have a covered memory card reader(s) or the readers may be located on the side panel. See your compu[...]

Removing a Memory Card The correct way to remove a memory card from a memory card reader varies, depending upon the media, reader, or computer model. Use care when removing a memory card to avoid damage to the reader or card. Do not remove a memory card while the media access indicator light is on. The card or its data may become damaged.  To re[...]

About Memory Stick Media Memory Stick ® media are a compact, portable, and versatile data storage media designed for exchanging and sharing digital data with compatible devices. The following types of Memory Stick media are available, but compatibility with your computer can vary.  MagicGate Memory Stick ® media — Provides copyright protecti[...]

Sharing Memory Cards If you plan to share your memory card between your VAIO ® computer and devices such as a digital camera or music player, the card must be formatted properly.  Format the memory card by using it in the device first. See the information supplied with the device for details how to format the memory card.  If your device doe[...]

Upgrading and Maintaining your VAIO Computer In the future you may want to increase the functionality of your VAIO computer. This section describes how to perform basic upgrades and maintenance on your computer.  Overview  About Opening the Computer  About Closing the Computer  About Add-on Card Installation  Installing Memory  Ab[...]

Overview The upgrading procedures described in this section assume that you are familiar with the general terminology associated with personal computers, safety practices, required regulatory compliances, and the modification of electronic equipment. Before upgrading your computer Disconnect the computer from its power source and from telecommunica[...]

About Opening the Computer R emoving the top cover 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and disconnect any peripheral devices. 3. Locate the two tabs on the top edge of the back panel. 4. Gently lift these tabs and slide the top cover towards the back of the unit. 5. Lift the [...]

About Opening the Computer R emoving the top cover 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and disconnect any peripheral devices. 3. Locate the two tabs on the top edge of the back panel. 4. Gently lift these tabs and slide the top cover towards the back of the unit. 5. Lift the [...]

R emoving the side panel 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and disconnect any peripheral devices. 3. Press the release button on the top edge of the side panel. Rem ov ing the side panel 4. Lift the side panel away from the unit and set aside. Page 72[...]

About Closing the Computer R eplacing the side panel 1. Align the tabs on the bottom of the side panel to the tracks on the edge of the chassis frame. 2. Gently press the side panel against the chassis, until the release button locks the panel back into place. Replacing the side panel Page 73[...]

About Closing the Computer R eplacing the side panel 1. Align the tabs on the bottom of the side panel to the tracks on the edge of the chassis frame. 2. Gently press the side panel against the chassis, until the release button locks the panel back into place. Replacing the side panel Page 74[...]

R eplacing the top cover 1. Align the tracks on the top cover to the tracks on the chassis frame. 2. Gently slide the top cover forward onto the chassis, until the back panel tabs lock the panel into place. Replacing the top cov er Page 75[...]

About Add-on Card Installation Your computer may have one or more open expansion slots, depending on the model configuration. An expansion slot enables you to install add-on cards to expand the functionality of your computer. The length of the add-on card should not exceed 9.05 inches. Add-on card configuration varies by model. Some models, such as[...]

Installing an add-on card 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and any peripheral devices. 3. Gently place the unit on its side and remove the side panel. See About Opening the Computer 4. Locate an available expansion slot. Remove the slot cover's screw, and then remove [...]

6. Attach any internal cables that the card requires. See the instructions supplied with the add-on card. 7. Replace the side panel. See About Closing the Computer . 8. Reconnect the power cord and all peripheral devices. 9. Turn on the computer. Page 78[...]

Installing Memory The amount of preinstalled memory may vary, depending on the computer purchased. Your computer may ship with all available memory slots filled. For memory replacement or upgrades, use the correct memory module for your computer's configuration. See the online Specifications sheet for details about the memory installed in your[...]

R emoving a memory module 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and all peripheral devices. 3. Gently place the unit on its side and remove the side panel. See About Opening the Computer If necessary, remove any cables, add-on cards, or other components to access the memory mod[...]

Installing a memory module 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and any peripheral devices. 3. Gently place the unit on its side and remove the side panel. See About Opening the Computer If necessary, remove any cables, add-on cards, or other components to access the memory mo[...]

About the Lithium Battery The lithium battery starts to weaken after several years and the system settings, such as the date and time stored in CMOS RAM, may become inaccurate. Replace the lithium battery when this occurs. There is danger of the battery exploding if it is replaced incorrectly. Replace the battery only with a CR2032-type lithium bat[...]

R eplacing the lithium battery 1. Write down any changes you may have made to the settings in the BIOS Setup utility. 2. Shut down your computer and turn off all peripheral devices, such as your printer. 3. Unplug your computer and the peripheral devices. 4. Gently place the unit on its side and remove the side panel. See About Opening the Computer[...]

R esetting the computer's date and time To reset your computer's date and time: 1. Double-click the time readout displayed in the Windows ® Taskbar Notification area. The Date and Time properties window appears. 2. From the Date & Time tab, change the settings as desired. Click Apply , and then click OK . Page 84[...]

About Hard Disk Drive Installation Your computer may be equipped with open internal bays to hold additional 3.5-inch hard disk drives. When you install an additional hard disk drive, the method of attaching connectors and cables may be different from the instructions described in this section. Review the manufacturer's information provided wit[...]

R eplacing the original hard disk drive If you replace the original, factory-installed hard disk drive, you may need to correct your drive mapping, create a VAIO Recovery Media Kit, or visit the Sony online support Web site for more information. About drive mapping When a new hard disk drive is installed, the original drive mapping 1 may be changed[...]

Installing an additional hard disk drive 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and any peripheral devices. 3. Gently place the unit on its side and remove the side panel. See About Opening the Computer 4. Detach the power and interface cables from the original hard disk drive t[...]

10. Push the drive holder handle down to lock the drive into position. 11. Reconnect the SATA and power connectors to the original drive. 12. Connect another SATA interface cable between the new drive and an unused SATA port on the motherboard. 13. Connect the second power connector to the new drive following the instructions supplied with the driv[...]

Identifying the additional hard disk space When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS) format. 1. Log on to Windows ® as Administrator. 2. Click Start in the Windows taskbar, then right-click My Computer . A shortcut menu appears. 3. Select Manage . The Computer Management [...]

About RAID Systems When multiple hard disk drives are combined, they can provide an affordable answer to your VAIO ® computer's performance or security requirements. This solution is called a Redundant Array of Independent Disks 1 (RAID). See your computer's specifications sheet for details on your computer's hardware configuration.[...]

A RAID Overview You have purchased a VAIO ® computer with one of the following options:  RAID-0 — Your computer is configured for RAID-0 and has two or more preinstalled S-ATA hard disk drives.  RAID-ready — Your computer has RAID capability and requires you to install one or more S-ATA hard disk drives. In either situation, you can: [...]

R easons for using a R AID array system When hard disk drives are grouped together in a RAID array, they are configured, formatted, and managed to perform in a specific way. Your computer's data is spread across these drives in a manner that determines the level of RAID performance and protection. The level of RAID protection and redundancy de[...]

R AID array organization A single hard disk drive has two basic functions — writing and reading data. These functions are handled differently when using a RAID array. A RAID array is organized from the physical drives into a physical array. (The hard disk drives are combined into the array.) These physical arrays are then formatted into a single,[...]

Additional Information To locate the online VAIO ® Computer User Guide The online User Guide provides information about configuring, maintaining, and upgrading your computer. This support resource offers a variety of topics, enabling you to quickly view specific information using context-sensitive search features. To access the online user guide: [...]

About RAID Levels RAID is intended to protect data and create fault tolerance. Important factors such as availability, reliability, fault tolerance, and performance, are essential to selecting a RAID level that meets your computing needs. Page 95[...]

R AID-0 This RAID level uses striping without parity. Striping breaks data into small pieces and then simultaneously writes or reads to multiple locations. This increases your computer's performance and data storage capacity. RAID- 0: Striping without parity Best uses for RAID-0 This RAID level is appropriate for situations where read/write pe[...]

R AID-1 This RAID level uses mirroring. Mirroring writes all data onto each hard drive in the RAID array, in exactly the same way. Your computer's reading performance is improved, while writing performance is slower, in comparison to a single hard disk drive. RAID-1 is the simplest redundant array to set up, as only two hard disk drives are re[...]

Configuring a RAID Array Certain VAIO ® computers are available for purchase as RAID-0 or RAID-ready. The number of preinstalled S-ATA hard disk drives can vary, depending on the hardware configuration purchased. See your computer's specification sheet for details about your specific hardware configuration. If you purchase a RAID-0 computer: [...]

Before getting started  Back up your computer's data to external media. Creating, altering, or configuring for RAID deletes all data from affected hard disk drives.  Create a VAIO Recovery Media Kit , so that you can configure the RAID volumes, and perform a hard disk drive recovery. For more information about creating recovery media usi[...]

Installing additional hard disk drives If you have purchased a RAID-ready computer, you may be required to install an additional drive(s). You can find details about installing additional hard disk drives in the "About Hard Disk Drive Installation" section of the online VAIO Computer User Guide. See To locate the online VAIO ® Computer U[...]

Using the R AID Configuration Wizard The RAID Configuration Wizard can configure two installed hard disk drives for RAID-0 or RAID-1 levels. You can also use the RAID Configuration Wizard to change your computer's RAID array to RAID-0 or RAID-1, or to remove the RAID configuration. 1. Press the power switch on the computer to turn on the compu[...]

When you use hard disk drives that vary in size, the RAID volume is related to the size of the smallest drive. For more information, see RAID-0 limitations or RAID-1 limitations . 10. Select one of the three options, and click Next . A final confirmation message appears. If you have not performed a back up of your computer's data, or you do no[...]

Using the VAIO R ecovery Wizard utility program A complete hard disk drive recovery restores the original, factory settings and recovers all of the preinstalled software programs. 1. From the VAIO Recovery Wizard main window, click Next . 2. Select Custom Recovery (for Advanced Users) , and click Next . 3. Select either option, as shown below, and [...]

About the Intel Storage Utility program You can find information about RAID volume configuration in the Intel ® Storage Utility program. This utility program contains the Intel ® Application Accelerator RAID edition feature. Locating the Intel Storage Utility program 1. Click Start from the Windows ® taskbar, and then click Control Panel . 2. Fr[...]

The Intel ® Application Accelerator Help file provides basic information on setting up additional hard disk drives as a RAID array. You can find more information on this topic at http://support.intel.com/support/go/iaa/kb_r.htm . Page 105[...]

RAID Glossary This glossary contains some basic terms that may aid your understanding of RAID technology. Term Definition Array Two or more hard disk drives that are grouped together and function as a single drive to the host computer. Fault tolerance The ability of a computer to continue its function, even after one or more hard disk drives have f[...]

Troubleshooting This section describes how to solve common problems and provides helpful information about using your computer's hardware features and preinstalled software. Your computer may not be equipped with all of the features or software discussed in this section, depending on the computer model or configuration purchased.  About VAI[...]

About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer.  Confirm that a disk is not in the floppy disk drive 1 (unless you are using a bootable floppy disk).  Confirm that a CD or DV[...]

About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer.  Confirm that a disk is not in the floppy disk drive 1 (unless you are using a bootable floppy disk).  Confirm that a CD or DV[...]

What can I do if my computer or software stop responding? You can try to locate and close the software program that has stopped responding. 1. Press the Ctrl+Alt+Delete keys. The Windows Task Manager window appears. 2. From the Applications tab, locate the software program that has the status message, " Not responding ." 3. Select the sof[...]

Why does the Windows operating system stop responding during shutdown? The Windows operating system may not shut down properly for many reasons, including incompatible or conflicting drivers, damaged files, or non-responsive hardware. For troubleshooting information, you can search Windows Help. 1. Click Start in the Windows taskbar and select Help[...]

Why is my computer running slowly?  The computer's responsiveness varies depending with the number of software programs that are open and running. Close any programs that you are not currently using.  Increasing the computer memory may also help. For information on installing memory, please see the online VAIO User Guide. To access the o[...]

How do I change the video resolution of my display? 1. Click Start in the Windows taskbar, and then select Control Panel . 2. Select Appearance and Themes , and then select Change the screen resolution . 3. Click the Settings tab. 4. Change the Screen resolution and Color quality to the desired levels. 5. Click Apply and then click OK . Page 113[...]

Why doesn't my computer resume normal operation from Stand by mode?  If your keyboard has a Stand by key , press it briefly to resume normal operation.  If your keyboard is not equipped with a Stand by key, press any key to resume normal operation.  For troubleshooting information, you can search Windows Help. 1. Click Start in the Wi[...]

About System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft ® Windows ® operating system is preinstalled on your computer. The best way to prot[...]

About System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft ® Windows ® operating system is preinstalled on your computer. The best way to prot[...]

How do I keep my preinstalled antivirus software updated? You can keep the preinstalled Norton Internet Security software program current with the latest updates from Symantec Corporation. To download and install the latest security update 1. Double-click the Norton Internet Security icon in the Taskbar notification area. If you have not previously[...]

About Media Center The Microsoft ® Windows ® XP Media Center Edition operating system is not installed on all VAIO Digital Studio ® computers. See your online specifications sheet for more information about your computer's configuration. Why doesn't the R EW button on the remote control work when I use My Music? The REW button does not[...]

About Media Center The Microsoft ® Windows ® XP Media Center Edition operating system is not installed on all VAIO Digital Studio ® computers. See your online specifications sheet for more information about your computer's configuration. Why doesn't the R EW button on the remote control work when I use My Music? The REW button does not[...]

Why aren't my song information edits visible in My Music? If you record a song in OpenMG ATRAC format and make edits, such as title, artist, or genre, using SonicStage software, the changes become visible when the music file is played in My Music. If you make changes to a music file using Media Center, the changes are not visible when played i[...]

Why do my song information edits revert to the original content when I use My Music? When you record songs with SonicStage software, and then use Windows ® Media Player software to edit the song's information, you may not see your changes when you play the song in My Music. Windows Media Player supports playback of songs recorded in OpenMG (A[...]

Why do my optimized music files take so long to appear in My Music? When you use SonicStage software to optimize music files to ATRAC3 or ATRAC3+ format, it may take a few moments for the music files to be available in My Music. To access these files sooner, start Windows Media Player software first, and then play the song with My Music. Page 122[...]

Why do I get the error message, "The input media is invalid" when I try to play an MP3 file in My Music? If you have added cover art to the MP3 file using SonicStage software, your file may contain an unsynchronized ID3v2 header. Media Center and Windows Media Play software programs cannot support playback of this file. You can go to Micr[...]

Why won't My Music show the albums (playlists) I recorded with SonicStage software? Playlists (albums) recorded with SonicStage software may not be immediately available in the Media Center Album window. To access these files sooner, start Windows ® Media Player software first, and then play the song with My Music. Page 124[...]

Why did my Click to DVD software recording session capture television instead of video? If Media Center starts a scheduled TV recording while you are capturing analog video with Click to DVD ® software, the TV programming may be captured instead of the video and the timed recording may fail. Media Center and the analog capture feature of Click to [...]

Why can't I view or record a movie when my computer is connected to an external device, such as a VCR or DVD player, or when I am using an analog input connection? If you see a blue background in the View window, the movie may be copyright-protected. Your computer is not able to display or record a video or DVD that is copyright-protected by M[...]

Why can't I fast forward or rewind a video? The rewind and fast forward features are not supported by all video formats. Try using the Skip or Replay buttons, which provides a similar function. Page 127[...]

How do I use the Media Center software or remote control to adjust my monitor when viewing TV programs? Media Center software and remote control do not have video adjustment capability. Use the controls on the monitor to adjust video settings, such as contrast, hue, and brightness. See the information provided with your monitor for instructions on [...]

What can I do if my computer freezes and restarts while I'm watching a DVD or live TV? Verify that the monitor refresh rate is set to 60 Hz, using the following steps: 1. Right-click on the desktop, and click Properties from the shortcut menu. The Display Properties window appears. 2. Click the Settings tab, and then click Advanced . 3. Click [...]

About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port.  Save and close all open software programs. Turn off your computer, wait approximately 10 seconds, and the[...]

Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery — do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the mouse. 1 For wireles s or s tandard optic al mic e. 2 O perate t[...]

About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port.  Save and close all open software programs. Turn off your computer, wait approximately 10 seconds, and the[...]

Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery — do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the mouse. 1 For wireles s or s tandard optic al mic e. 2 O perate t[...]

How do I set up my mouse for left-hand use? 1. Click Start in the Windows taskbar, then click Control Panel . 2. Click Printers and Other Hardware , then click Mouse . The Mouse Properties dialog box appears. 3. From the Buttons tab, select Switch primary and secondary buttons under the Button Configuration options. 4. Click Apply , then click OK .[...]

Why doesn't my keyboard work properly?  Check that the keyboard 1 is securely plugged into the keyboard port.  Save and close all open software programs. Turn off your computer, wait approximately 10 seconds, and then restart your computer.  If you are using a wireless keyboard:  Confirm that the supplied AA batteries are properly [...]

About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to oth[...]

About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to oth[...]

Why doesn't my modem work properly? Your modem may be experiencing equipment or software conflicts. If your modem is not functioning properly, check the following:  Check that the telephone line is properly plugged into the modem line jack.  Check that the telephone line is working properly. You can verify the line by plugging in an exte[...]

How do I change my modem to rotary or touch-tone dialing? 1. Click Start in the Windows taskbar, then click Control Panel . 2. Click Printers and Other Hardware , then click Phone and Modem options . 3. From the Dialing Rules tab, click Edit . The Edit Location dialog box appears. 4. Select the Tone or Pulse option. Click OK . Page 139[...]

How do I set up a dial-up connection? After you have connected your computer's modem to a telephone wall jack, follow these steps to set up your dial-up connection to the Internet: 1. Click Start from the Windows taskbar and select All Programs . 2. Point to Accessories , point to Communications , and then click New Connection Wizard . The New[...]

About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.  If your speakers use [...]

About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.  If your speakers use [...]

Why is the S/PDIF option disabled in the Microsoft ® Windows ® XP Media Center software program? S/PDIF is enabled in Media Center 1 by changing the DVD settings. This feature is disabled because the appropriate output setting is not selected in the InterVideo ® WinDVD ® software program's audio setup. To change audio settings in the WinDV[...]

Why can't I hear dialogue during DVD movie playback, using my 5.1 channel 1 speaker system?  Verify that your speaker system is connected correctly.  Change the computer's audio settings to 6-channel, to match your 5.1 speaker system.  Change the audio settings in the RealTek ® Sound Effect Manager software program.  Change t[...]

About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 145[...]

About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 146[...]

Why is my microphone so sensitive to background noise? If you find there is too much background noise when you record sound, you should adjust the microphone by following these steps: 1. Click Start in the Windows taskbar, then click Control Panel . 2. Click Sounds, Speech, and Audio Devices , then click Sounds and Audio Devices . 3. From the Audio[...]

About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels 1 . If your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation. [...]

About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels 1 . If your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation. [...]

The connected printer does not function properly when the computer resumes from a power saving mode.  Clear the printer memory by turning the printer off for approximately 10 seconds, and then turning it back on.  If your printer does not resume normal operations, try restarting your computer. Page 150[...]

Notes On Use The information in this section provides basic procedures for handling your computer and common peripheral devices, and using storage media.  About the Power Source  About Handling the Computer  About Using a Monitor (Display)  About Disposing of the Lithium Battery  About Recording and Data Storage Media Page 151[...]

About the Power Source Before opening your computer, turn the computer off and let it cool down for 10 minutes. This protects you against internal components that may be too hot to handle.  Your computer operates on 100-220 V AC 50/60 Hz only.  Plug all the power cords for your computer and its peripheral equipment into the same AC supply lin[...]

About Handling the Computer Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs, relocate the computer a suitable distance away from the TV or radio equipment.  Do not place your Sony computer in a location subject to:  Heat sources, such as radiators or air ducts  Direct sunl[...]

 Use the CONNECT buttons on the wireless device and your computer, if available, to establish communication between the equipment.  Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless keyboard. These other devices may cause interference, causing your wireless keyboard or mouse t[...]

About Using a Monitor (Display)  DVD playback and certain video-related software may not function correctly when your monitor is set to a high refresh rate. If your monitor does not play back video content properly, try setting the display to a lower refresh rate.  Do not place the display near a strong magnetic force.  Do not block the ve[...]

About Disposing of the Lithium Battery Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or business trash may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center. For the Sony Service Center nearest you, visit the Sony onlin[...]

About Recording and Data Storage Media Handling CD or DVD media  Do not touch the surface of the disc.  Do not drop or bend the disc.  Do not use adhesive labels to identify the disc. The label may come off while the disc is in use in the optical drive and damage the drive. Cleaning CD or DVD media  Fingerprints and dust on the surface [...]

Support Options Sony provides several options to help solve common problems or to locate support for your VAIO ® computer. This section describes all available resources and offers suggestions on how to access this information for maximum results.  Immediate Help and Support  Software Help and Support  Resources for Additional Help and Su[...]

Immediate Help and Support You can locate helpful information immediately by consulting your hard copy guides and supplements, or by accessing the online Computer User Guide and individual software Help files. Your computer is supplied with these support options:  VAIO ® Computer Quick Start 1 — The Quick Start contains information on how to [...]

Software Help and Support Technical support information for the preinstalled software on your computer is located in this section. Sony software support is free of charge for 90 days after the original date of purchase. Your computer may not be supplied with all of the software discussed in this section, depending on the computer purchased. To view[...]

Web site http://www.support.microsoft.com Microsoft ® Windows Media ® Player Microsoft Corp. Web site http://www.support.microsoft.com Microsoft ® Windows ® Movie Maker Microsoft Corp. Web site http://www.support.microsoft.com Microsoft ® Works Microsoft Corp. Web site http://www.support.microsoft.com MoodLogic MoodLogic, Inc. Web site http://[...]

RecordNow! ® Sonic Solutions Web site http://support.sonic.com SonicStage Sony Electronics Inc. The SonicStage software program gives you all the tools you need to manage music files on your computer. SonicStage software delivers high-quality digital audio storage, a sleek player skin design, and audio CD-burning capability. Web site http://www.so[...]

VAIO Media Sony Electronics Inc. VAIO Media software brings multimedia to your network, enabling you to share music, video, and picture files between your VAIO ® computers. You can set up one or more computers as "media servers," that store your multimedia files and make them available to other compatible VAIO computers on your wired or [...]

Resources for Additional Help and Support If the information provided with your VAIO ® computer does not offer an immediate solution, or you would like to get direct support, try these additional help and support resources. Sony online support Web site Online help and support are available 24 hours a day, seven days a week, when you visit the Sony[...]