Speco Technologies & IP-WDRB1 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 126 pages
- 2.34 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Security Camera
Speco Technologies CVC-620WP
2 pages 0.31 mb -
Security Camera
Speco Technologies CVC-6700 Series
1 pages 0.81 mb -
Security Camera
Speco Technologies CVC770PHSCS
1 pages 0.19 mb -
Security Camera
Speco Technologies CVC624WDR
20 pages 0.8 mb -
Security Camera
Speco Technologies CVC-7445EXTP
1 pages 0.09 mb -
Security Camera
Speco Technologies HT647HRTP
32 pages 7.59 mb -
Security Camera
Speco Technologies CVC5735DNVW
44 pages 11.57 mb -
Security Camera
Speco Technologies VL-648IRVF
1 pages 1.99 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Speco Technologies & IP-WDRB1. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Speco Technologies & IP-WDRB1 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Speco Technologies & IP-WDRB1 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Speco Technologies & IP-WDRB1 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Speco Technologies & IP-WDRB1
- nom du fabricant et année de fabrication Speco Technologies & IP-WDRB1
- instructions d'utilisation, de réglage et d’entretien de l'équipement Speco Technologies & IP-WDRB1
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Speco Technologies & IP-WDRB1 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Speco Technologies & IP-WDRB1 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Speco Technologies en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Speco Technologies & IP-WDRB1, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Speco Technologies & IP-WDRB1, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Speco Technologies & IP-WDRB1. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
1 IP Camera Use r ’ s Manual Speco Technolo gies IP C am era Us er’s Ma nua l (Ver sion 1.3.2 ) IP-INTB1 & IP-INTB2 & IP-WDRB1 Network Bullet Cameras IP-INTD3 & IP-INTD4 Network Dome Cameras IP-INTT5 & IP-T5 Network T raditiona l Cameras IP-SD10X S peed Dome Camera[...]
-
Page 2
2 IP Camera Use r ’ s Manual Speco Technolo gies Introducti on We appreciate yo ur purchasing our IP Network Camera. This is a Netwo rk Camera with a built-in MPEG- 4 CODEC a nd Streaming Server. It u ses an MP EG-4 CODEC as the V ideo Comp ression method and has a bu ilt-in Streamin g S erver which allows you to monitor and record real time imag[...]
-
Page 3
3 IP Camera Use r ’ s Manual Speco Technolo gies Imp ortan t N otes The Net work C am era may be da mage d by elec trica l and phy sical shoc k Do not try to disas sem ble the pro duct s. Conta ct or consul t the distrib utor or Hea d Office for after sale servi ce. The re may be no Quality As sur ance for the prod ucts disa ssem bled arb[...]
-
Page 4
4 IP Camera Use r ’ s Manual Speco Technolo gies Conte nts 1. F EATU RE ............................................................................ 8 1.1. P ACKAGE ............................................................................................................ 8 1.2. D IMENSION AND C AMERA F EAT URES .................................[...]
-
Page 5
5 IP Camera Use r ’ s Manual Speco Technolo gies 4.2. N ETWORK S ETTING ........................................................................................... 37 4.3. V IDEO S ETTING ................................................................................................. 38 4.3.1. Video Se tting .....................................[...]
-
Page 6
6 IP Camera Use r ’ s Manual Speco Technolo gies 5.3. U SE OF IP S ETTING U TIL ITY .............................................................................. 99 5.4. U SE OF S ERVICE S ERV ER ................................................................................ 101 5.4.1. User Regi stration ........................................[...]
-
Page 7
7 IP Camera Use r ’ s Manual Speco Technolo gies 1. Fe atu re[...]
-
Page 8
8 IP Camera Use r ’ s Manual Speco Technolo gies 1. F eatu re 1.1. P ackage Package of Product s is compose d o f main body of pr oduct, S oftware CD ( NVR Pr ogram, I P Utility, Product Man ual, NVR Manual) , Quick Install Guide, C ross LAN Ca ble, Accessory Pack , Powe r Lea d Cable. Please check befo re starting in stallation. Software CD IP/N[...]
-
Page 9
9 IP Camera Use r ’ s Manual Speco Technolo gies 1.2. D imensio n an d Cam era F eatures 1.2. 1. Dime nsions 1) Bullet Camera 2) Dome Camera ① ③ ② ① ② ③[...]
-
Page 10
10 IP Camera Use r ’ s Manual Speco Technolo gies 3) Traditional Ca mera 3) Speed Dome Ca mera 1) Power Port: Power conn ection por t (12 VDC) 2) VIDEO Port : Vide o Output Port (BNC) 3) LAN Port: LAN C onnection Port ( Connect w ith L AN Ca ble fo r Local Netw ork or Internet Viewing) LINK: LED On (When the product connects with LAN Cable) ?[...]
-
Page 11
11 IP Camera Use r ’ s Manual Speco Technolo gies 1.2. 2. Came ra Fe ature I. Inte nsifie r Ca mera s (Not available with IP-T 5) 1) SLC ( Speco Light Compensati on ) : When the ima ge i s in f ront of strong background lightin g, you r camera allows you to get a clear image. 2) Intensifier: 1/3 inch dou ble den sity CCD and digital processor pe [...]
-
Page 12
12 IP Camera Use r ’ s Manual Speco Technolo gies 16) Camera OSD control with client progr am 17) Super Day/Nigh t Function wit h Power Sensor-up engine 18) Intelligent Pan /Tilt Controll ing 19) High-frame rate of up to 30fps at 704x480 size image 20) 4 selectab le image sizes – D1 ,Half D1,2CIF,CIF 21) Simultaneous access up t o 20 users 22) [...]
-
Page 13
13 IP Camera Use r ’ s Manual Speco Technolo gies 2. I nst all a nd Ch eck Vide o[...]
-
Page 14
14 IP Camera Use r ’ s Manual Speco Technolo gies 2. In stall an d Ch eck Vid eo 2.1. I nstallati on 1) Connect the IP Camera to the PC by L AN cable (Crossove r Cable) 2) Supply power to the camera u sing a 12 volt DC regulated p ower supp ly. 3) Wait approximately 2 minutes until the Lin k/LED light comes on. 2.2. V ideo C heck Basic network se[...]
-
Page 15
15 IP Camera Use r ’ s Manual Speco Technolo gies 1) Set IP Ad dress, Subn et Mask a nd Ga te-way of U ser’s PC with 1 92.168.1.50, 255.255 .255.0 and 192.168.1.1 a s shown on [Fig . 2-1]. Fig. 2― 2 Web Brows er Input 2) Run We b Brow ser a s [ 2-2] a nd in put 192.168.1 .7 in URL an d clic k “En ter”, then [2-3] is shown. In ca se [ 2-3][...]
-
Page 16
16 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 2―4 User login 4) Input ID and Pas sword on [Fig. 2-4] to see Vide o. 5) User’s Authority to see Video on THE CAM ERA is as fo llows ; Table 2-1 User ID, Password, Rights User ID User P assword Rights Guest Guest Monitor only PTZ (select models only) PTZ Monitor, Control of P/T/Z, Control[...]
-
Page 17
17 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 2―5 Act iveX Down load 9) Upon in stallation, Web Viewer [Fig . 2-6] appea rs and th e image of the Came ra can be seen. Fig. 2―6 W eb Viewe r 10) After checking prope r ope ration as seen on [Pic 2-6], go onto the nex t C hapter (3) Ba sic Setting. 11) Refer to (5) Basic Use’ to see th[...]
-
Page 18
18 IP Camera Use r ’ s Manual Speco Technolo gies 3. B as ic Se ttin g[...]
-
Page 19
19 IP Camera Use r ’ s Manual Speco Technolo gies 3. B asi c Sett ing 3.1. C heck N etwor k and I nstalla tion Typ e This Chapter is fo r basic setting of THE CAMER A. To install Hardware of the Network Camera, basic understandin g of N etworking is required. Please refer to Chap ter 6 in case kn owledge of Network Envi ronment i s required. T he[...]
-
Page 20
20 IP Camera Use r ’ s Manual Speco Technolo gies 3.2. I nstallati on without IP sharing device ( Router) 3.2. 1. Static IP Se tup 1) After checking Vide o in ‘Video Che ck’, go to the next step. 2) Connect THE CAM ERA to PC wit h LAN Cable (Crossover Cable). 3) Cable conne ction and Network Setup should be same as shown in ‘ 2. Install and[...]
-
Page 21
21 IP Camera Use r ’ s Manual Speco Technolo gies 6) Put ‘admin’ in ID an d Password line, click ‘Login ’, then [3 -3] ‘Admini strator's Page ’ will be shown. (ID , Passwor d of THE CAMERA is preset a s admin/admin in Administrator’ s Page. Change Admin istrator’s ID and P assword in Genera l Setting of ‘ 4. Expert Setting [...]
-
Page 22
22 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 3―4 Ne twork Se tting 12) Click ‘Click Here’ upon appea ring of IP Change Wind ow of [3-5] . 13) IP Change loading Page a ppears as [3- 6], the Main Pa ge of changed a ddress is connected. (Not e: You may n ot find the main pa ge of c hanged ad dress under Cross Cable conne ction, but I[...]
-
Page 23
23 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 3―6 IP Change loading Pag e 14) Remove L AN Cable (Cros s Cable) co nnected between THE CA MERA and PC . 15) Connect T HE CAMERA to N etwork wi th LAN Cable (Straig ht Cable). 16) Connect PC to Network with LAN Cable (St raight Cab le).. 17) Set up IP Address, Subnet Mask and Gateway of PC [...]
-
Page 24
24 IP Camera Use r ’ s Manual Speco Technolo gies 4) Go to Netw ork Set ting Page of Adm inistrator’s Pa ge as per 4), 5), 6), 7) of ‘Static IP Setup’. Fig. 3― 7 Network Se tting 5) Click on ‘Dynamic IP Address’ in ‘IP Setting’ . 6) Click ‘Save’ Button . 7) Upon completion of setting, close the Web Page and find IP of T HE CAM[...]
-
Page 25
25 IP Camera Use r ’ s Manual Speco Technolo gies connect to THE C AMERA by D omain Na me (Server Name) al located to THE CAMER A. For example, run Web Browser and input Domain Name allocated to THE CAMERA in UR L. In http://IPXXXXX.ipcam 4u.net, ‘IPXXXX X’ is to be Name of Se rver reg istered in S ervice Server by user. If the initia l pa ge[...]
-
Page 26
26 IP Camera Use r ’ s Manual Speco Technolo gies 7) DNS Address should be input . In c ase THE CAMERA i s ins talled un der IP S haring Device, input local IP of Router in 2 nd DNS Serve r Address. 8) Click ‘Save’ Button of [3-9] to save the set value. Fig. 3―9 Networ k Setting 9) Click ‘Click Here’ upon appearin g of I P Change Window[...]
-
Page 27
27 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 3―10 IP Change 11) It is connected to the new IP set up, in 20 seconds af ter window of [3-11 ] appears. 12) Check Video of T HE C AMERA refe rring to ‘2. I nstall and Video Check’ as soon as i t is connected to t he new IP. 13) Go to Netw ork Set ting Page of Admini strator’s Page a [...]
-
Page 28
28 IP Camera Use r ’ s Manual Speco Technolo gies 14) Set Port in Por t Settin g Page of [3 -12]. It i s requi red t o s et ea ch different Port for many THE CAMER A Network Cameras un der 1 Router. 15) Click ‘Save’ Button to save set value. 16) Remove L AN Cable (Cros sover Cable ) connected betw een T HE CAMERA and PC . 17) Connect T HE CAM[...]
-
Page 29
29 IP Camera Use r ’ s Manual Speco Technolo gies connect to THE C AMERA by D omain Na me (Server Name) al located to THE CAMER A. For example, run Web Browser and input Domain Name allocated to THE CAMERA in UR L. In http://IPIN TB1.ipcam4u.ne t , ‘IPIN TB1’ i s t o be Nam e of S erver reg istered in Se rvice Server by user. If the initia l [...]
-
Page 30
30 IP Camera Use r ’ s Manual Speco Technolo gies 4. Exp ert Set ting[...]
-
Page 31
31 IP Camera Use r ’ s Manual Speco Technolo gies 4. E xper t Se tting After regi stration of T HE C AMERA in Service Serv er ( refer to ‘U se of Servi ce Se rver’ of ‘‘ 5. Basic Use’’ , connect to T HE CAM ERA by Domain N ame ( Server N ame) a llocated to THE CAMERA. (For example, ru n Web Browser and input Domain Name allocated to T[...]
-
Page 32
32 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 4―2 Adm inistrato r’s Page[...]
-
Page 33
33 IP Camera Use r ’ s Manual Speco Technolo gies 4.1. G eneral Settin g Fig. 4―3 Gene ral Sett ing 4.1. 1. Title Settin g Fig. 4―4 Title Setting Server title is to be English with out space. Click ‘Save’ Button to save title af ter input name .[...]
-
Page 34
34 IP Camera Use r ’ s Manual Speco Technolo gies 4.1. 2. Adm inistrat or’s I D an d Pas sword Cha nge ※ Cautions : Change Administr ator’s ID and Passw ord and do not disclose the in form ation to others . Administrato r’s ID and Pas sword should be English, within 20 cha racters, with out space. Click ‘Save’ Button to sav e the cha [...]
-
Page 35
35 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 4―6 Us er Registra tion 4.1. 4. Use r List a nd De lete Fig. 4―7 Us er List User list is avai lable on clicking ‘List Users’ on [4-7], to check li st and delete user ID in [4-8]. User ID ‘guest’, ‘PTZ’, ‘audio ’, ‘Iaudio’, ‘PC Audio’, ‘root ’ has be pre-regi st[...]
-
Page 36
36 IP Camera Use r ’ s Manual Speco Technolo gies 4.1. 6. Time Zone Setti ng This is to set Tim e zone of locati on where THE C AMERA i s to be insta lled, to s et up l ocal time in ca se of monit oring from diffe rent time zon e area. Se lect one of time zone in ‘Se t T ime Zone ’ and save. Fig. 4―10 T ime Zone Click ‘Display’ in [4-10[...]
-
Page 37
37 IP Camera Use r ’ s Manual Speco Technolo gies 4.1. 8. Selec t Lan guage This is to select language to be displayed in a ll Web Pages such as Admini strator’s Page, Web Viewer and Main Page of THE CAMERA. Fig. 4―13 Select L anguage It supports both Eng lish and Ja panese. Cli ck ‘Save ’ Button to save the se t value af ter se lect the [...]
-
Page 38
38 IP Camera Use r ’ s Manual Speco Technolo gies 4.3. V ideo Se tting Fig. 4―14 Video Se tting 4.3. 1. Video Sett ing Select and tick on the Channel to use, inp ut Video format (NTSC o r PAL), Comp ressed resoluti on, Bit rate, Frame rate, Key frame . Video setting can be d one automati cally by pressing ‘High’, ‘Normal’, ‘Low’ acc[...]
-
Page 39
39 IP Camera Use r ’ s Manual Speco Technolo gies 4.4. C olor Se tting This is to adju st color of channel . Fig. 4― 17 Display C olor Sett ing Upon adjustmen t of col or on [4 -17], then click ‘Sa ve’ to save t he setting value. I n ca se to return to default, click ‘Default’ to go t o defa ult. Even in this case , it is required to cl[...]
-
Page 40
40 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 4―18 A larm Se tting Designate condition to d rive Event i n ‘Alarm C ondition’ , such as Senso r Event, Motion d etection Event or Senso r + Motion dete ction Event, If Sen sor Even t is selected, make Sens or settings Upon even t situation after setting on ’Enable ’ in ‘ Alarm?[...]
-
Page 41
41 IP Camera Use r ’ s Manual Speco Technolo gies 4.5. 2. Alarm Eve nt Te st Click ‘Test’ of [4-18], THE CAM ERA will w ork as if Alarm has happened . In case selected ‘Alarm Style ->’Alarm Server’, E vent is to be n otified to Alarm Server and is t o recorded in to the recorded file (1 0 seconds bef ore and 50 second s after Event) [...]
-
Page 42
42 IP Camera Use r ’ s Manual Speco Technolo gies Remote Control: to con trol Relay thr ough Internet u sing Viewe r Local Con trol: Re lay i s on during ‘Duration ’ time up on Event on Senso r, then is off. Remote & Loca l Control: Contr ol Relay throug h Interne t using Viewer . To be ON during ‘Duration ’ time upon even[...]
-
Page 43
43 IP Camera Use r ’ s Manual Speco Technolo gies 4.8. C amera Setting (sup port fo r IP-SD 10X) Fig. 4-20 Ca mera Se tting It is available to p re-set Pan/Ti lt/Zoom Camera s. Preset Setting is available up t o 20, but may be less than 20 for some model of Came ra. (1) OSD Menu: to activate OSD Menu. (2) Preset No: to select the Pre set [...]
-
Page 44
44 IP Camera Use r ’ s Manual Speco Technolo gies 4.9. H omepa ge Upd ate Fig. 4― 21 Homepa ge Update Homepage Updat e function i s for user to upload the main pag e of THE C AMERA onto user ’s Homepage. User’s Homepage i s composed of 3 files, ind ex.html, top .htm, main.h tm. The file fo r user to u se is main.htm. After making Web Page ([...]
-
Page 45
45 IP Camera Use r ’ s Manual Speco Technolo gies 4.10 .1. Re mote Upgr ade Fig. 4― 22 Firmwa re Update Address of ‘Upda te Server Address’ in [4-22 ] is set as ‘ipcam4u.net ’. Check ‘Current S oftware Ve rsion’ in ‘Current Ve rsion’ of [4- 22] a nd go ahead with u pdate if current version is lower t han la test version. Upon cl[...]
-
Page 46
46 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 4―24 F irmware D ownload ‘Downloading’ message wi ll be show n until comp letion of Update as [4-24] (i t may take time according to Ne twork situation) . U pon co mpletion of upgra de, t here ap pears message show ing upgrade result. [4-25] is the me ssage showing tha t upgrade has bee[...]
-
Page 47
47 IP Camera Use r ’ s Manual Speco Technolo gies user keep finding [4-27] or can ’t upgrade, con tact head office of Spec o Technologie s Fig. 4―27 Up grade Server Co nnection Err or 4.10 .2. Sys tem R e-b ooting This is the f unction to re-boot I nner S oftware of T HE C AMERA. Clic k ‘Restart ’ on [4- 41] ‘System Restart’ to reboot[...]
-
Page 48
48 IP Camera Use r ’ s Manual Speco Technolo gies 4.11. Factory Reset 4.11 .1. Re set Bu tton Press reset but ton for 1sec to be operated .(Red Circle) Fig. 4―28 F actory res et button 4.11 .2. In re set of Fa ctory defau lt Changed to [19 2.168.1.7] of IP Address. Changed to [19 2.168.1.1] of Ga teway. Changed the Se rver Login Por[...]
-
Page 49
49 IP Camera Use r ’ s Manual Speco Technolo gies 5. Bas ic U se[...]
-
Page 50
50 IP Camera Use r ’ s Manual Speco Technolo gies 5. Ba sic Us e 5.1. Use of Web V iew er Fig. 5― 1 Web Vie wer Table. 5-1 Definition of We b Viewer B utton Fun ction Display Screen reduced by 5 0%. Display Sc reen a t 100%. Double-cli cking mou se on enlarged screen has the same functi on. Enlarge Video of a channel to 640 x 480. Double -click[...]
-
Page 51
51 IP Camera Use r ’ s Manual Speco Technolo gies Relay ON Relay OFF Select Preset to control Select Tour to control Select Pattern t o control Move to the selec ted Preset/Tour /Pattern. Preset Tour. Move to preset l ocation in regular sequence from No . 1 up to 200. Move to next one after 5 seconds pa use on a preset location. Display Camera Me[...]
-
Page 52
52 IP Camera Use r ’ s Manual Speco Technolo gies Table 5- 2 Definition of Web Viewer Ke y Board ② ‘space ’Key’ Enlarge / reduce Screen ③ Number Key’ Preset Move Fun ction, The Number rep resents the Pr eset Number 20 Preset is con trolled by Key Board Key Board 1 ~ 0 : Preset 1 ~ Preset 10 Key Board q [...]
-
Page 53
53 IP Camera Use r ’ s Manual Speco Technolo gies 5.2. Use of OSD (Not avail able w ith IP-T5) The OSD menu of this camera can be contro lled by Web View er. Please refer to t he ‘ 1.2.2 Ca mera Feature ’ for OSD function . 5.2. 1. Func tion 1 1) Intens ifier Came ras (No t ava ilabl e with IP-T 5) SET UP ME NU LENS option ●DC ●MANUAL SHU[...]
-
Page 54
54 IP Camera Use r ’ s Manual Speco Technolo gies 2) Speed Dom e Ca mer a (IP- SD 10X) MAIN MENU DOME SETUP CAMERA SET AUTO SCAN TOUR PRAVACY PATTERN ALARM SECTOR EXIT DOME SET CAMERA ID : CAM1 RECOVER : OFF MANUAL SPEE D : 100 ° /S AUTO FLIP : OFF ZOOM SPEED : FAST ALARM : DISABLE LANGUAGE : ENGLISH [NEXT PAGE] SAVE AND EX IT CAMERA SET FLICKER[...]
-
Page 55
55 IP Camera Use r ’ s Manual Speco Technolo gies 3) WDR C ame ra (I P-W DR B1) SPECO MAIN MENU PRESETS WDR WB CONTROL LOW LIGHT SPECIAL EXIT M ENU DEFAUL T / INDOOR / OUT DOOR / CUSTO M SET UP ID DC AUTO OFF AT W (Range 2K~11K) AWB MANUAL (Range 2K ~11K) VIDEO : (NTSC / PAL) FLIP : (OFF / ON) SYNC : (L,LOCK / INT / INT2) BACK LIGHT : (OFF / ON :[...]
-
Page 56
56 IP Camera Use r ’ s Manual Speco Technolo gies 5.2. 2. OSD Menu Sett ing When y ou control th e O SD by usi ng t he joystick on t he camera , refer to the following ( select models only) When you contr ol by the five ke ys on the Webvi ewer GUI ref er to the f ollowin g R I G H T DOWN UP SETUP L E F T[...]
-
Page 57
57 IP Camera Use r ’ s Manual Speco Technolo gies 5.2. 3. Oper ating Came ra O SD Me nu (Inten sifie r Came ras) SET UP menu is displaye d on the monitor screen. 1. Pr ess the S ET b utton to acce ss th e SET UP mod e. Each time you press the UP or DOWN butt on, the arrow indicator moves up or down. Move the arrow indic ator to the desir ed featu[...]
-
Page 58
58 IP Camera Use r ’ s Manual Speco Technolo gies 1) S etting up the LENS Selec t the l ens pre ssing the R IGHT bu tton. ① On the SETUP menu scree n, move the arrow in dicator to the lens using the UP or DOWN button. ② Select the desired feature using the LEFT or RIGHT button.[...]
-
Page 59
59 IP Camera Use r ’ s Manual Speco Technolo gies ▶When DC LENS selected, pre ss SET button t o control the BRIGHTN ESS.[...]
-
Page 60
60 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the setup menu an d move the arrow ind icator to ‘ SHUTTER ’ usin g the UP or DOWN but ton. ② Set ‘ SHUTTER ’ to the desired m ode using the LEFT or RIGHT button. ▶ OFF : Deacti vation ▶ FLK(1/100) : Flicker mode (When WDR is on, the ima ge can fl[...]
-
Page 61
61 IP Camera Use r ’ s Manual Speco Technolo gies ▶MANUAL : When setting shutter speed manually. (Only fo r LENS mode) You can select speed from ‘ 1/60 ’ to ‘ 1/200,000 ’ sec[...]
-
Page 62
62 IP Camera Use r ’ s Manual Speco Technolo gies ▶ESC : You can c ontrol the BRIGHTNESS . ③When complet ed, press ‘ SET ’[...]
-
Page 63
63 IP Camera Use r ’ s Manual Speco Technolo gies ▶HIGH ▶MIDDLE ▶LOW ▶OFF ① Press the SET button to dis play the SETUP menu and move the arrow indicator to ‘ BACKLIGHT ’ using the UP or DOWN button. ② SET ‘ BACKLIGHT ’ to the d esired mode using the LEFT or RIGHT butt on. 3) SLC ( Spec o Lig ht Co mpe nsa tion) - B ACKL IGHT A[...]
-
Page 64
64 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the SETUP menu and move the arrow indicator to ‘ AGC ’ usin g the UP or DOWN butt on. ② SET ‘ BACKLIGHT ’ to the desired mode using the L EFT or RIGHT butt on. 3) AUTO GAIN CO NTROL (A GC) AGC is to get brig ht pic ture . Hig her G AIN leve l, get tin[...]
-
Page 65
65 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the SETUP menu and move the arrow ind icator to ‘ WHITE BAL ANCE ’ using the UP or DOWN button. ② Set ‘ WHITE BAL. ’ to the desired mode using LEF T or RIGHT bu tton. 5) WHI TE BALAN CE (WHITE BAL.) For color cont rol on th e scre en, use ‘ WHIT E B[...]
-
Page 66
66 IP Camera Use r ’ s Manual Speco Technolo gies ▶MANUAL : To fin e adjust, se lect the Manua l mode. Yo u can increa se or decrease the red o r blue factor while monitorin g the differen ce on the screen. Set to ‘ M ANUAL ’ mode and press the SET but ton. Increa se or decrease the va lue for RED(R-Gain ) and BLUE( B-Gain), wa tching the c[...]
-
Page 67
67 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the SETUP menu and move the a rrow indicator to ‘ DNR ’ using the UP or DOWN button. ② SET ‘ DNR ’ to the desired mode using the LEFT or RI GHT button. ▶HIGH : High reduc tion of the noise ▶MIDDLE : Middle reduction of the noise ▶LOW : Low reduc[...]
-
Page 68
68 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the SETUP menu and move the a rrow indicator to ‘ Intensifie r ’ using the UP or DOWN button. ② SET ‘ Intensifier ’ to the desir ed mode using the L EFT or RIGHT button. Notes ▶AUTO : When y our camera is under ni ght or low-lighting level, select t[...]
-
Page 69
69 IP Camera Use r ’ s Manual Speco Technolo gies 8) NE XT PAGE If the CAMERA ID feature is set to ‘OFF’, the name will not dis played in the monitor. Notes ① Press the SET button to dis play the SETUP menu and move the arrow ind icator to ‘ CAMERA TITL E ’ using the UP or DOWN button. ② SET ‘ ON ’ using the LEFT or RIGHT button. [...]
-
Page 70
70 IP Camera Use r ’ s Manual Speco Technolo gies If the CAMERA TITL E feature is set to ‘OF F’, the name will not displayed in the monitor. After erasing the ch aracter from right to le ft, correct the characte r again. Notes ③ Press SET button to access the SETUP mode. ④ Yo u can enter up to 15 character s. a. Move the cursor to charact[...]
-
Page 71
71 IP Camera Use r ’ s Manual Speco Technolo gies B) C OLO R You can choo se c olor a nd B/W mod e ele ctron ically . (OP TION ) OSD Key m ay not work for 3 seconds when the COLOR/ BW mode is changed. Notes ▶ ON : color m ode ▶ AUTO : genera lly color mode, B/W mode in low luminance. ▶ OFF : B/W m ode[...]
-
Page 72
72 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the setup menu an d move the arrow indic ator t o ‘ SYNC ’ using the UP and DOWN button. ② SET to the desired mode us ing the LEFT or RIGHT button. C) SY NC Line Lock is onl y available in the 24 volt AC mode of operation. In 12 volts DC, the SYNC menu is[...]
-
Page 73
73 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the setup menu an d move the arrow ind icator to ‘ PRIVACY ’ us ing the UP and D OWN button. ② SET ‘ PRIVACY ’ to the desire d mode using the LE FT or RIGHT button. D) P RIVA CY ▶OFF : Deactiva tion ▶ON : PRIVACY mode activated -Press the SET butt[...]
-
Page 74
74 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the setup menu an d move the arrow ind icator to ‘ REVERSE ’ usin g the UP and DOWN but ton. ② SET ‘ REVERSE ’ to the desir ed mode using the L EFT or RIGHT butto n. E) REVE RSE ▶OFF : Deactiva tion ▶ON : Make a re verse turn to RIGHT or LEFT.[...]
-
Page 75
75 IP Camera Use r ’ s Manual Speco Technolo gies ① Press the SET button to dis play the setup menu an d move the arrow ind icator to ‘ DETAIL ’ u sing the UP and DOWN button. ② SET ‘ DETAIL ’ to the desire d mode using the LEFT or RIGHT button. F) DE TAI L ▶OFF : Deactiva tion ▶ON : DETAIL co ntrol mode (level 0~31 ) When the lev[...]
-
Page 76
76 IP Camera Use r ’ s Manual Speco Technolo gies G) D EFA ULT : Use to re set your cam era to FA CTO RY D EFAU LT S ETT ING. H) P AGE 1 : PA GE 1 : Sa ve th e se tting of N EXT PAGE fun ction, and then[...]
-
Page 77
77 IP Camera Use r ’ s Manual Speco Technolo gies 5.2. 4. Oper ating WDR Cam era O SD M enu (IP-W DRB 1) OSD MENU CONT ROL CENTER KEY - Used t o access men u mode. Also used to confi rm the setti ng UP / DOWN KEY - Used to cho ose the desired menu selectio n. LEFT / RIGHT KEY - Used to choose t he desired men u feature adjustm ent. OSD MENU ENT E[...]
-
Page 78
78 IP Camera Use r ’ s Manual Speco Technolo gies - O N :The ID name will displayed i n the monitor. - OFF : Th e name will not displayed in the m onitor . • CAMERA ID : E nter up to 8 cha racteristic. • ID POSITION : Select the scre en position of the camera ID. C. LENS • DC : Use W hen using DC lens. • MANUAL : Use When using Ma nual le[...]
-
Page 79
79 IP Camera Use r ’ s Manual Speco Technolo gies • SHARPNESS : O N (Y ou c an adjust th e desired Sharpn ess form -8 t o 8) or O FF H. EXIT MENU • EXIT NO CHANGES : N o change • SA VE NEW AND EXI T : Save c hange • RESTORE F ACTORY SETTINGS : Factor y default • RELEASE VERS ION I. PREVIOUS P AGE • PREVIOUS P AGE : R eturn page 5.2. 5[...]
-
Page 80
80 IP Camera Use r ’ s Manual Speco Technolo gies A. Dome Setup T o enter Dome setup, use the five keys right to m ove wh en cursor on do me setup. A -1. DOME SET - CA M ERA ID T o set camera ID, select up to 16 character s using Five keys to the left or right. Press ZOOM TELE button to mov e to the next charac ter from left to right direction an[...]
-
Page 81
81 IP Camera Use r ’ s Manual Speco Technolo gies select ON or OFF . The defau lt setting is OFF . A -5. DOME SET – ZO OM SPEED Zoom speeds are selectable F AST or SLO W mode. Move five keys to the righ t direction for selecting F AST or SLOW . The default setting is F AST . A -6. DOME SET – A LARM All alarms are available after set as ENABLE[...]
-
Page 82
82 IP Camera Use r ’ s Manual Speco Technolo gies 5.2.1. OSD MA IN MENU T ABLE (P AGE 54) The de fault setting i s BLANK. Press any number from 001~255 with preset button on password blank and again it on confirm blank. Then “CONFIRM ED” is displayed on the m onitor and the menu will go back to the previou s page automa tically . <CONFIRME[...]
-
Page 83
83 IP Camera Use r ’ s Manual Speco Technolo gies A -8 -4. DO ME SET – [NEXT P AGE] – [ SYSTEM ST A TUS] This page shows the information of this camera. - Protocol and baud rate are shown according to the dip sw itch setting (Refer to page 29, 30 and 31) - Firmware v ersion and upgraded date w ill be changed if upgrade d. - Below camera mo du[...]
-
Page 84
84 IP Camera Use r ’ s Manual Speco Technolo gies - T o clear m emorize any data, move five k eys to the right direction when cursor is on each item. Press FOCUS NEAR button when t he cursor is at YES in order to clear memorized data. Then f lickered each item such as t our , preset, sector and so on i s displayed on the monitor about 2~3 seconds[...]
-
Page 85
85 IP Camera Use r ’ s Manual Speco Technolo gies A -9. DOME SET – [NE XT P A GE] – SA VE A ND EX IT T o s aving the memorized data an d escape this page, move five keys t o the r ight direction when cur sor is at SA VE A ND EXIT . A -1 0. DO ME SET – [NEXT P A GE] – EXIT In order not to save any data and w ants to escape this pag e, move[...]
-
Page 86
86 IP Camera Use r ’ s Manual Speco Technolo gies B-3. CA M ERA SET – A P ERTURE Aperture enhance s picture details by increas ing gain of the caemra and s harpens the edges in the picture . The de fault seeting is 10. (the aperture lev el is from 01 ~ 15) (10X Zoom) B-4. CA M ERA SET – D ZOOM Move five keys t o the right direction in order t[...]
-
Page 87
87 IP Camera Use r ’ s Manual Speco Technolo gies (10X Zoom) B-9. CA MER A SET – DSS MODE (DIGIT AL SLOW SHUTTER) If DSS turns on, digita l slow shutter is working. Per second, the electroni c shutter will remain open to re ceive some more lighting . (10X Zoom) B-10. CA MER A SET – EXIT T o escape this page, m ove five keys to the right dire [...]
-
Page 88
88 IP Camera Use r ’ s Manual Speco Technolo gies C-3. P RESET – P A N: XXX.X TIL T : XX.X Press FOCUS F AR button i n order to s et preset position t hen, use the f ive keys to the position where m emorized preset no. is needed. Then press FOCUS F AR button again after setting a pr eset location. C-4. P RESET – SA VE Move five keys to the ri[...]
-
Page 89
89 IP Camera Use r ’ s Manual Speco Technolo gies right or left d irection CW: Clo ck wise direction (Defaul t) CCW: Cou nt Clock Wise Directio n. D-4. AUT O SCAN – ENDLESS Auto Scan can use endless rotat ion, m ove five keys to the right direct ion in order to select ON. Otherwise, the defaul t setting is OFF . D-5. AUT O SCAN – SPEED User c[...]
-
Page 90
90 IP Camera Use r ’ s Manual Speco Technolo gies E. TOUR SET 8 Programmable tours can be set a nd each tour is available to set up to 64 preset steps. E-1. TOUR SET – TOUR NO . Max. 8 group tour no. set by the five keys are available. E-2. TOUR SET – TOUR TIT LE T o set tour title, select up to 16 characters using Five keys to left or r ight[...]
-
Page 91
91 IP Camera Use r ’ s Manual Speco Technolo gies E-6. TOUR SET – SPEED Each tour step can be set with differen t tour speed up to 200°/S and it is selectable from 10°/S. M ove f ive k eys t o the right or left direction t o s elect tour speed. The default setting is 200°/S. E-7. TOUR SET – SA VE T o save the memorized data and escape this[...]
-
Page 92
92 IP Camera Use r ’ s Manual Speco Technolo gies T o s et the blocking area, press FOCUS F A R bu tton when the M OVE MODE is appeared . Then use the f ive keys to the user defined area in order to set blocking area. Then press FOCUS F AR button again to escape from MOV E MODE. T o adjust s ize of blocking area, move five keys to the right or le[...]
-
Page 93
93 IP Camera Use r ’ s Manual Speco Technolo gies Up t o 8 programmable user-d efined patterns set by the five keys o n the W ebviewer GUI are available. G-2. P A TT ERN SET – P A TT T ITLE T o set P A TTERN TITLE, sele ct up to 16 characters usin g Five keys to the lef t or right. Press ZOOM TELE button moves to the nex t character from the le[...]
-
Page 94
94 IP Camera Use r ’ s Manual Speco Technolo gies H. ALARM SET 4 Alarm input s are available and each alarm is activating to presets, group tours or patterns . H-1. A L ARA M SET – ALA RM NO. Up to 4 alarms are selectable by u sing five keys to the right dire ction wh en cursor is on A LARM NO. H-2. A L ARA M SET – ALA RM INPUT Input alarm wa[...]
-
Page 95
95 IP Camera Use r ’ s Manual Speco Technolo gies * Before activating Alarm, user must set A LARM ENABLE at DOM E SET – A LARM – ENABLE (Refer to page 15) I. SECTOR SET Up to 8 progra mmable sectors are availab le with 16 characters. This feature is use ful to memory the certa in location such a s parking z one or so on. When camera goes thro[...]
-
Page 96
96 IP Camera Use r ’ s Manual Speco Technolo gies I-4. SECTOR SET – SECTOR END T o set S ECTO R E ND angle, press FOCUS F AR button then move five keys to t he left or right direction to set the position. T o pre ss FOCUS F A R button again is to escape . I-5. SECTOR SET – SA VE After setting the SECT OR position, to save the da ta, move f iv[...]
-
Page 97
97 IP Camera Use r ’ s Manual Speco Technolo gies 5.2.6. DIP SW SE TTIN G Mini Speed Dome camera provides up to 63 c amera ID and it’s adjustable ID with 1 st ~6 th of Dip switch Open the camera case, set ID usin g DIP SW1. * Factory default: Ca mera ID = 1, PELCO-D 5.2. 7. ID SE TTIN G(1-O N, 0- OFF )(1 10 ) DIP SW ID V ALUE DIP SW ID V AL[...]
-
Page 98
98 IP Camera Use r ’ s Manual Speco Technolo gies 100010XXXX 17 1 1 1001XXX X 39 101 1 1 1X XXX 61 010010XXXX 18 000101XXXX 40 01 1 1 1 1XXX X 62 1 10010 XXXX 19 100101XXXX 41 1 1 1 1 1 1XX XX 63 001010XXXX 20 010101XXXX 42 101010XXXX 21 1 10101XX XX 43 01 1010 XXXX 22 001 101XX XX 44 5.2.8. PRO TOCO L 7 th ~8 th dip sw itches are used for Protoc[...]
-
Page 99
99 IP Camera Use r ’ s Manual Speco Technolo gies 5.3. Use of IP Set ting Utility Upon running IP Setting Utility, the following pr ogram i s to be displayed . Fig. 5― 2 IP Find Click ‘IP Find’ Butt on to find IP of THE CAMERA on local Netw ork. Fig. 5―3 D isplay IP The followin g window shows list of IP al ong with Web Se rver Port Num b[...]
-
Page 100
100 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5―4 I P Check After finding IP, double-click IP of THE CAMERA to g o to the editab le Mode as fo llows. Fig. 5―5 I P Check Input new I P Addres s, Default G atewa y, Subnet Mas k, and then input Passwo rd of TH E CAM ERA Administrator and click ‘IP C hange’ , to set u p n ew I P of T[...]
-
Page 101
101 IP Camera Use r ’ s Manual Speco Technolo gies 5.4. Use of Serv ice S erver Run Web Browse r and input http://ipcam4 u.net in URL and click ‘Enter’, then [ 5-6] will appea r as follows. Fig. 5―6 S ervice Se rver Click the languag e user want t o use.[...]
-
Page 102
102 IP Camera Use r ’ s Manual Speco Technolo gies 5.4. 1. Use r Regis tratio n Fig. 5― 7 User Login Click ‘Register Now ’ in [5-7]. Fig. 5―8 Agre ement[...]
-
Page 103
103 IP Camera Use r ’ s Manual Speco Technolo gies Read the Agree ment carefully and click ‘Agree’ in case to agree, and go to the next page. Fig. 5―9 User Regist ration The part marked with (*) i s mandatory. Use r ID is to be dou ble-checke d. Then click ‘Log In’. Fig. 5―10 Us er Registe red If [5- 10] appear s, U ser Registration h[...]
-
Page 104
104 IP Camera Use r ’ s Manual Speco Technolo gies and password on [5-7] to con nect to Servi ce Server. Fig. 5―11 S ervice Se rver Log-in Succeede d 5.4. 2. Came ra Re gistr ation Click ‘To registe r camera’ in [5- 11] to go to Ca mera Regi stration Page . Fig. 5―12 C amera Re gistration Input name of T HE CAMERA in ① of [5-12], w hich[...]
-
Page 105
105 IP Camera Use r ’ s Manual Speco Technolo gies knowing IP add ress of THE CAM ERA. D omain Name must be unique. R egister after c hecking if i t is duplicate or not . ③ is to check w hether the Came ra is to be open or not. ④ i s for the f unction to connect to THE C AMERA ea sily b y U ser’s ID and Password registe red in THE CAMER A, [...]
-
Page 106
106 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5― 14 Came ra List [5-14] shows the regi stered List of THE CAMERA . U pon clicking on ‘C amera Name ’ registered in [5-14], [ 5-15] wil l show the Camera Information . ‘Time ’ is the latest time for TH E CAMER A t o report to Service Server. Fig. 5― 15 Came ra Informa tion On cl[...]
-
Page 107
107 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5―16 A larm Lo g List ‘Alarm Log Li st’ shows the inf ormation of a channel , alarmed time, type of Alarm . It is availab le to delete the log f ile. T HE CAMER A se nds the recorded files, dividin g into Video fi le and Audio files, to Service Serve r In case there i s no recorded fil[...]
-
Page 108
108 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5― 17 Chan ge User’s Inf ormation Save User’s informa tion by clic king ‘To Cha nge Informa tion’ after cha nge user’s inf ormation. 5.4. 5. Searc h Cam era Fig. 5―18 S earch C amera ‘Search Ca mera’ of [5-18] is t he fun ction to see inf ormation of T HE CA MERA or connect[...]
-
Page 109
109 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5― 19 Search Camera If user want to see in formation of T HE CAMER A b y the Address, se lect ‘Inf ormation’ an d input MAC Address of T HE C AMERA to se e in formation on, and click ‘confi rmation’ . T hen Informati on of THE CAMERA wil l be shown a s [5-20]. 5.5. S ee and Contro [...]
-
Page 110
110 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5―21 I nput User ID On user ID input Page [5 -21], in put user’s ID registered in ‘Use of Servi ce Serve r ’ of ‘5. Basic Use’. Fig. 5―22 L ist of Regis tered Pro ducts Select one of the products (C amera or Server) registered by user on[5 -22]. Fig. 5―23 M enu Select a item [...]
-
Page 111
111 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5―24 Pan/Tilt/Z oom Contr ol It is a vailable t o see Image a nd cont rol Pant/Tilt /Zoom/5 Pre set. Numbe r Key of M obile Phone controls Pan/Ti lt/Zoom. (2) Relay Contr ol (2 Relay contr ollable) It is ava ilable to cont rol up to 2 Re lay. R elay Na me a nd cur rent status ([O N/OFF[...]
-
Page 112
112 IP Camera Use r ’ s Manual Speco Technolo gies It shows the Sen sor Name and current sta tus ([Normal/Sen sing]) . 5.5. 2. PDA (WinCE ) Run ‘In ternet Explorer’ of PDA and input ht tp://ipcam4 u.net/pdah 5450_eng.htm in put in URL to connect to Servi ce Server. Fig. 5―25 P DA Log-in On user ID Input Pa ge [5- 25], input user’s ID regi[...]
-
Page 113
113 IP Camera Use r ’ s Manual Speco Technolo gies Fig. 5―27 M enu 5.6. U se of NVR P rogram 5.6. 1. Requ ired Specif icatio n of P C an d OS Item Min. Requ iremen t Recomm ended S pecification CPU Pentium Ⅳ 2.0G Pentium Ⅳ 2.4G o r higher Main Me mory 256MB 512MB or highe r O/S * Windows 2000/XP Windows 2000/XP Web Brow ser I.E 5.0 I.E 5.0 [...]
-
Page 114
114 IP Camera Use r ’ s Manual Speco Technolo gies 6. Netw or k E nvir o nme nt[...]
-
Page 115
115 IP Camera Use r ’ s Manual Speco Technolo gies 6. N etw ork Envir onm en t It is requi red to follo w the reco mmen dati on of the environ men t where THE CAM ER A will b e instal led or the sim ilar e nvir onme nt . 6-1. Priv ate l ine E nviron men t Usually Company, Unive rsity, Research center use the lea sed line. They use many public IP [...]
-
Page 116
116 IP Camera Use r ’ s Manual Speco Technolo gies Web Connection P ort : Port 80 TCP Authentication an d Control Por t : Port 9 000 TCP Video Streaming Port : Port 9001 TCP Motion Detectin Con trol Port : Port 9005 TCP[...]
-
Page 117
117 IP Camera Use r ’ s Manual Speco Technolo gies 7. Ap pen dix[...]
-
Page 118
118 IP Camera Use r ’ s Manual Speco Technolo gies 7. App end ix Appendix A Basic Setting T able Item Defau lt (Basic Setting) Rema rks Networ k Settin g Static IP / Dynamic IP Static IP IP Server Enable IP Address 192.168.1.7 Gateway 192. 168.1.1 Subnet Mask 255.255.255.0 Web Connection Port 80 Authentication /Control Port 9000 Video Streaming P[...]
-
Page 119
119 IP Camera Use r ’ s Manual Speco Technolo gies Appendix B Specifica tion of P roducts B-1 IP-INTB1 / INT B2 Image Sensor 1/3" Sony Super HAD CCD, 410,000 p ixels NTSC 811(H)*508(V) Total Pixel PAL 795(H)*592(V) NTSC 768(H)*494(V) Effective Pixel PAL 755(H)*582(V ) Horizontal resolutio n 540 TV Lines Minimum Illumin ation 0.002 Lux(select[...]
-
Page 120
120 IP Camera Use r ’ s Manual Speco Technolo gies B-2 IP-INTD3 / IN TD4 Image Sensor 1/3" Sony Super HAD CCD, 410,000 p ixels NTSC 811(H)*508(V) Total Pixel PAL 795(H)*592(V) NTSC 768(H)*494(V) Effective Pixel PAL 755(H)*582(V ) Horizontal resolutio n 540 TV Lines Minimum Illumin ation 0.002 Lux(selectab le limit ~ X128) S/N Ratio 50dB(Weig[...]
-
Page 121
121 IP Camera Use r ’ s Manual Speco Technolo gies B-3 IP-INTT5 Image Sensor 1/3" Sony Super HAD CCD, 410,000 p ixels NTSC 811(H)*508(V) Total Pixel PAL 795(H)*592(V) NTSC 768(H)*494(V) Effective Pixel PAL 755(H)*582(V ) Horizontal resolutio n 540 TV Lines Minimum Illumin ation 0.002 Lux(selectab le limit ~ X128) S/N Ratio 50dB(Weight On) Le[...]
-
Page 122
122 IP Camera Use r ’ s Manual Speco Technolo gies B-4 IP-T5 Image Sensor 1/ 3" Panasoni c CCD, 410,000 pixels NTSC 811(H)*508(V) Total Pixel PAL 795(H)*592(V) NTSC 768(H)*494(V) Effective Pixel PAL 755(H)*582(V ) Horizontal resolutio n 480 TV Lines Minimum Illumin ation 0.5 Lux S/N Ratio 48dB(Weight On) Lens C/CS Mount Lens s electable Scan[...]
-
Page 123
123 IP Camera Use r ’ s Manual Speco Technolo gies B-5 IP-WDRB1 Image Sensor 1/3" Pixim ORCA CMOS(Dramatic Dyn amic range senso r) NTSC Total Pixel PAL 742(H)*552(V) Horizontal resolutio n 540 TV Lines Minimum Illumin ation 0.08Lux (DSS on ) with F1.2 Lens S/N Ratio 53dB or mo re Lens DC AUTO IRIS VF 2. 8~10mm(F1.2) Scanning System 525 lines[...]
-
Page 124
124 IP Camera Use r ’ s Manual Speco Technolo gies B-6 IP-SD10X Image Sensor 1/4" Sony Super HAD CCD No. of Pixel 768(H) * 494 (V) 380K Horizontal re solution More Than 500TV Lines Minimum Illumina tion 0.7Lux (50IRE) / 0.02Lux (ICR On) Digital Slow Shutt er 2/4/8/16/24 /32/64/128/ OFF Optical 10x Optical Zoo m(F=3.8 to 38mm) Lens Digital 1 [...]
-
Page 125
125 IP Camera Use r ’ s Manual Speco Technolo gies Interfac e 10/100Mbps Current U sers 20 Manual Yes Schedule Yes Motion Detection Yes Recording@PC Sensor event Yes Sensor Trigger /Motion Detection Yes Event& Alarm Alarm Notificatio n SMS/E-MAIL/Alar m Sound(Option) Video Output VBS:1.0Vp-p/75 Ohm Dimension 158.8φ (D) * 163.0 mm(H) Power So[...]
-
Page 126
126 IP Camera Use r ’ s Manual Speco Technolo gies Check with ‘C-1 -2 Network Cab le (LAN cab le) and cab le connection check’. PING Test In case Camera u ses Stati c/Public IP: in put “Ping IP addre ss” to comm and window of PC and check response. In case ca mera use s dynamic /public IP : In this ca se, user cannot f ind[...]