Symbol MC70 manuel d'utilisation

User Guide MC70 Enterprise Digital Assistant[...]

[...]

MC70 User Guide 72E-71769-01 Revision B August 2006[...]

ii MC70 User Guide © 2006 by Symbol T echnologies, Inc. All righ ts reserved. No part of this publicatio n may be reproduced or used in any form, or by any electrica l or mechanica l means, without permission in writing from Symbol. This in cludes electronic or mechanical means, such as photocopying, recording, or information storage and retrie va[...]

iii Revision History Changes to the original manual are listed below: Change Date Description A 1/2006 Initial release. B 8/2006 Add Revision History page. Chapter 2: Add vibrator feature information. Remove Green and Red Phone button remappi ng information. Not supported. Update cold boot procedure to remo ve st ep to calibrate screen after cold b[...]

iv MC70 User Guide[...]

T able of Contents Patents .................................................... .......................................... .......................... ... ii Revision History ................................................ ........................................... .................. i ii About This Guide Introduction .............................[...]

vi MC70 User Guide Turning Off the WLAN Radio ..................................................... ....................... 1-12 Turning Off the Bluetooth a nd WAN Radios ................................................... .. 1-13 Chapter 2: Using the MC70 Introduction ....................................... ........................................[...]

Table of Contents - vii Modes .................................................... .......................................... ........................... .. 3-4 Wizard Mode .................................... .......................................... ............................. 3-4 Explorer Mode .................................................[...]

viii MC70 User Guide Taking Notes .......................................................................................... ....................... 4-5 Using Speed Dial ................................................................................... ....................... 4-6 Adding a Speed Dial Entry ..........................................[...]

Table of Contents - ix Magnetic Stripe Reader (MSR) ............................................. ........................................ 5-12 Attaching and Removing the MSR .......................................................................... 5-12 Using the MSR .......................................... ......................................[...]

x MC70 User Guide[...]

About This Guide About This Guide Introduction This guide provide s info rm a tio n abou t us ing the MC70 Enter pri se Digital Assistant (EDA) and acc es sor ie s. Documentation Set The document ation set for the MC70 provides info rmation for specific user need s, and inc ludes: • Microsof t ® Windows Mobile 5.0 Applicat ions User Guide for Sy[...]

xii MC70 User Guide Configurations This guide covers the following configurations: • MC7004 - Win dows ® Mobile 5.0 Operating System; EDGE GPRS quad-ba nd W AN radio; Bluetooth ® wireless technology (Class II); QVGA 3.5” color display; 64MB RAM/128MB flash memory; 1D laser scanner or 2D imager; numer ic or QWERT Y keypad; V o IP ready (V oIP [...]

About This Guide xiii Chapter Descriptions T opics covered in this guide are as follows: • Chapter 1, Getting St arted provide s information on getting the ED A up and running for the first time. • Chapter 2, Using the MC70 provides basic instruct ions for using the EDA, including p owering on and resetting the EDA, and entering and capturing d[...]

xiv MC70 User Guide Related Documents • MC70 Quick S t art Guide , p/n 72-71770-xx • MC70 Microsof t Mobile 5.0 Regulatory Information , p/n 72 -71767-xx • MC70 Integrator Guide , p/n 72E-7176 8 -xx • Microsof t ® Applications for Mobile and CE 5.0 User Guide , p/n 72E-7845 6-xx • Symbol Application Guide , p/n 72E-68901-xx • Symbol Mo[...]

About This Guide xv Asia/Pacific Symbol T echnologies Asia, Inc. (Singapore Branch) 230 Vi ctoria S treet #12-06/10 Bugis Junction Office T o wer Singapore 18802 4 T el: +65-6796-9600 Fax: +65-6337- 6488 Australia Symbol T echnologies Pty . Ltd. 432 S t. Kilda Road Melbourne, V ictoria 3004 Australia 1-800-672-906 ( Inside Australia) +61-3-9866- 6 [...]

xvi MC70 User Guide If you purchase d yo ur Symbol pr od u ct fro m a Symb ol Bus ine ss Par tn er , contact that Business Partn er for service. For the latest version of this guide go to: http://www .symbol.com/manuals . Norway/Norge Symbol’s registered and mailing address: Symbol T ec hnologies No rway Hoybratenv eie n 35 C N-1055 OSL O, Norway[...]

Chapter 1 Getting Started Chapter 1 Getting Started Introduction This chapter lists the p arts and accessories for the EDA and explains how to inst all and charge the batteries, replace the strap, an d power on the EDA for the first time. Figure 1-1 MC70 Front V iew Scan/Action Button Handstrap Attachment Keypad (Numeric Keypad Pictured) Power Butt[...]

1 - 2 MC70 User Guide Figure 1-2 MC70 Rear Vi ew Unpacking Carefully remove all pr otective material from the EDA and save the sh ipping cont ainer for later storage and shipping. V erify that you receive d the follo win g eq ui pm e nt: • MC70 EDA • Lithium-ion batt er y • Battery cover/strap assembly • T ethered stylus • Protective over[...]

Getting Started 1 - 3 Accessories T able 1-1 list s the accessories available for the MC70 EDA. T able 1-1 MC70 Accessories Accessory Description Snap-on Cables The EDA supports th e following cables: • AC line co rd (country -specific) an d power supply , charges the EDA. • Auto charge cab le, charges the EDA using a vehicle’ s cigarette lig[...]

1 - 4 MC70 User Guide Getting Started T o start using the EDA for the first time: • Install the main batter y and cover assembly . • Charge the ED A. • Power on the EDA. • Configure the EDA. Installing and Removing the Main Battery Installing the Main Battery Before using the EDA, inst all a lithium-ion battery . The standard cap acity 1900[...]

Getting Started 1 - 5 3. With the battery cover latches open, insert the cove r , bo ttom first, then press d own on the top of the cover . Figure 1-4 Inserting th e Battery Cover 4. Close the battery cover latches on either side of the battery cover . 5. Insert the hand st ra p th ro ug h the ha n ds tra p slot, th en tight e n and pr es s down to[...]

1 - 6 MC70 User Guide 4. Lift the top of th e battery c over and r emove. Figure 1-7 Removing the Battery Cover 5. Press the battery release latch on the bottom of the ba ttery to unlock, and lift th e battery out of the well. Charging the Battery Charging the Main Battery and Memory Backup Battery Before using the EDA for the first time, charge th[...]

Getting Started 1 - 7 The standar d cap acity ba ttery (1 900 mAh) fully char ges in less than fo ur hours. The extended cap acity ba ttery (3800 mAh) fully charg es in less than eight hours. Charging Spare Batteries Use one of the following accessories to charge a 1900 mAh or 3800 mAh sp are battery: • Single Slot USB/Serial Cradle • Four Slot[...]

1 - 8 MC70 User Guide Charging T emperature Charge ba tteries in tem peratures from 0 o C to 40 o C (32°F to 104°F). Note that at temperatu res above 35 o C, charging is intelligently cont rolled by the EDA and the c harging accessory in order to ensure safe operation and optimize long -term battery life. T o accomplish this, for small periods of[...]

Getting Started 1 - 9 SIM Card GPRS phone service requires a Su bscriber Identification Module (SIM) c ard, or smar t card. Obtain this card from the phone service provider . The card fits into the EDA and can cont ain the following information: • Mobile phone service provider account det ails. • Information regarding se rvice access and prefer[...]

1 - 10 MC70 User Guide 7. Press the re d Power button. 8. Ta p Sta r t - Phone - Menu - Options - Network tab and verify that the se rvice provider appears in the Current netwo rk : field. 9. Make a call to verify connection. Adjusting the Handstrap The EDA handstrap is att ached to the bottom of the ba ttery cover . Adjust the handstrap to increas[...]

Getting Started 1 - 11 Removing the Screen Protector A screen protector is appli ed to the MC70. Symbol reco mmends us ing this to minim ize wea r an d tear. Sc re en protectors enhance the usability and durability of touch screen displays. T o remove the screen protector , lift the corn er using a th in plastic card, s uch as a credit card, then c[...]

1 - 12 MC70 User Guide Changing the Power Settings T o set the EDA to turn off af ter a short period of non-use: 1. Ta p Sta r t - Settings - System tab - Power icon - Advanced ta b. 2. Select the On battery power: T urn off device if not used for check box and select a value from th e drop-down list. 3. Select ok . Changing the Backlight Settings [...]

Getting Started 1 - 13 T urning Off the Bluetooth and WAN Radios T o turn off the Bluetooth an d WAN radios : • T ap the Connectivity icon (on non-W AN devices) or the Antenna/Signal icon (on W AN device s) and sel e ct T urn on flight mode OR • T ap the Bluetooth icon and select Disable Bluetooth . T o turn on the Bluetooth and W AN radios: ?[...]

1 - 14 MC70 User Guide[...]

Chapter 2 Using the MC70 Chapter 2 Chapter 2 Using the MC 70 Introduction This chapter explains th e buttons, status icons, an d co ntrols on the EDA, and provides basic instructions for using the EDA, including powering on and resetti ng the EDA, and enterin g and capturing dat a. Status Icons The navigation bar at the top of the screen can cont a[...]

2 - 2 MC70 User Guide WW AN Call missed. V o ice call. V o ice call in progress. Calls are forwarded. Call on hold. S peakerphone is on. Antenna/signal icon: wireless on/good signal. Antenna/signal icon: wireless of f. Antenna/signal icon: no service or sear ch ing. Roaming. T ime and Next Appointment Displays current time in analog or digital form[...]

Using the MC70 2 - 3 The comman d bar at th e bottom of the scr een can con tain the task tray ico ns listed in T abl e 2- 2 . Speaker Icon T o adjust the system volume using the Speaker icon in the navigation bar: 1. T ap the Speaker icon. The Vo l u m e dialog box appears. Figure 2-1 V olume Dialog Box 2. T ap and move the slide bar to adju st th[...]

2 - 4 MC70 User Guide Battery Icon Battery icons appear on the na vigation bar when the main battery or backup battery power falls below a predetermined level. A Battery dialog box also appears ind icating the status of the main or backup battery . Figure 2-2 Battery S tatus Dialog Box Also view the battery status using the Power window . Connectiv[...]

Using the MC70 2 - 5 WW AN Icon The WWAN ico n s indicate the status of the phone and antenna/signa l. Figure 2-4 WWANConnectivity Icon T ime Icon The Time icon displays the current time in a digital or analog format. T o change the time format, tap and hold the Tim e icon until a menu appears. Select the format. Figure 2-5 Time Icon Fo rmat Menu C[...]

2 - 6 MC70 User Guide T o display current date, time, and appointments, t ap the Time icon to display the Time and Next Appointment dialog box. Figure 2-6 Time and Next Appointmen t Dialog Box The dialog box displays the current date and time, th e ba ttery status, and any upcom ing appointment s in the Calendar . Instant Message Icon The Instant M[...]

Using the MC70 2 - 7 E-Mail Icon The E-Mail icon notifies you when you receive incoming e-mails. Figure 2-8 New E-mail Messages Dialog Box Multiple Notifications Icon The Multiple Notifications icon appears whe n two or more message no tifications occur . T ap the icon to display the multiple noti fication icon s. Figure 2-9 Multiple Notifications [...]

2 - 8 MC70 User Guide LED Indicators The MC70 has three L ED indicato rs. The S can/Decod e LE D indicates status for scanning. The Char ge S tatus LED indicates status for ma in battery charging. The Radio Power S tatus LED indicates radio status. T able 2-3 describes th e LED indic ations. Figure 2-10 LED Indicators T able 2-3 LED Indications LED[...]

Using the MC70 2 - 9 Keypads The EDA of fers two modular keyp ad configurations: Numeric and QWERTY . Numeric Keypad Configuration The numeric keyp ad contains applicatio n keys, scroll keys, and function ke ys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that an application can chan ge keypad functions so t[...]

2 - 10 MC70 User Guide T able 2-4 MC70 Numeric Keypad Descriptions Key Description Blue Key (lef t) Use this key to launch appli cations or access items ( shown on the keyp ad in blue). Press the Blue key once to activate this mode, followed by ano ther key . A single press displays the following icon at the bottom of the screen, until a seco nd ke[...]

Using the MC70 2 - 11 Alphanumeric In default st a te, produces the numeric value on the key . In Alpha sta te , produces the lower case alphabetic characters on the ke y . Each key press prod uces the next alphab etic char ac ter in sequence. For exam ple, press and release the Orange key and then press the ‘4’ key once to produce the letter ?[...]

2 - 12 MC70 User Guide 44 F 4 $ g h i G H I 55 F 5 % j k l J K L 66 F 6 ^ m n o M N O 77 F 7 & p q r s P Q R S 88 F 8 * t u v T U V 9 9 F 9 ( w xyzW X Y Z 00 F 1 0 ) . > Up Up Up Hilight Up Left Lef t Down Down D own Hilight Down Right Right Enter Action Action Action Action Action T able 2-5 Numeric Keypad Inpu t Modes (Continued) Key Numer[...]

Using the MC70 2 - 13 QWERTY Keypad Configuration The QWER TY keyp ad produces the 26-character alp hab et (A-Z, both lowercase a nd uppercase), numbers (0-9), and assorted char acters. The keyp ad is color-coded to indica te which modifier key to press to prod uce a particular characte r or action. The key pad default is alphabetic, pr oducing low[...]

2 - 14 MC70 User Guide Orange Key (right) Accesses the secondar y layer of characters and actions (shown on the keypa d in orange). • Press the Orange key once to activate this mode tempor arily , followed by another key . This displays the following icon at the botto m of the sc reen, until a second key is pres sed: • Press the Orange key twic[...]

Using the MC70 2 - 15 Backlight T urns the display backlight on and off. Backspace Produces a backspac e. Enter Executes a select ed item or fu nc tion . S tar Produces an asterisk. OK Use this key in conjunction with the Blue ke y as an OK or close button. This function is user programmab l e. S tart Menu Use this key in conjunction wit h the Blue[...]

2 - 16 MC70 User Guide Ii I = Oo O “ Pp P á ü O K Aa A # Ss S 4 Dd D 5 Ff F 6 Gg G ( Hh H ) Jj J / Kk K : Ll L ‘ BACKSP ACE Backspace Shift Shif t Zz Z 7 Xx X 8 Cc C 9 Vv V % Bb B & Nn N ! Mm M ? ,, <@ T AB T ab Back tab SP ACE S pace .. >0 ENTER Enter T able 2-7 QWERTY Ke ypad Input Modes (Contin ued) Key Normal Shift + Key Orange [...]

Using the MC70 2 - 17 Special Character Key T o add special characters using the MC70 áü key , type the related ch aracter first, then press the Orange + áü (P) key . Continue holding the Orange key and pressin g the áü key until the special character displays. T o modify an existing character , move the cursor to the r i gh t of the chara c [...]

2 - 18 MC70 User Guide T u U y Y z Z $ / “ ( ) + ! . * @ % , # & _ ‘ ? : - T able 2-8 Special Characters (Continued) Key Special Characters[...]

Using the MC70 2 - 19 Function Buttons The EDA ’s buttons perfor m ce rtain func tions. Figure 2-13 Function Buttons • Power : Press the red Power button to turn the EDA screen on an d off. The EDA is in suspend mode when the screen is of f. For more information, see Powering On the EDA on p age 1-8 . Also us e the Power button to r eset the ED[...]

2 - 20 MC70 User Guide Using a Headset Y ou can use a stereo he adset for audio communication wh en using an audio- enabled application. T o use a headset, plug the he adset jack into the audio connec tor on the side of the EDA. Set the EDA ’s volume appropriately be fore putting the headset on. Plugging a headset into the jack mutes the speaker [...]

Using the MC70 2 - 21 Linear Scanning EDAs with an integrated linear scanner have the followin g features: • Reading of a variety of ba r code sym bol og ie s, incl uding the most popular linear , postal, and 1-D code types. • Intuitive aim ing for easy point-and- shoot oper ation. Imaging EDAs with an integrated imager have the followin g feat[...]

2 - 22 MC70 User Guide • Angle Scanning angle is import ant for promoting quick decodes . Wh en laser beams reflect directly back into the scanner from the bar code, this specul ar reflection can “ blind” the sc anner . T o avoid this, scan the bar code so that the beam does not bou nce dir ectly back. But don’t scan at too sharp an angle; [...]

Using the MC70 2 - 23 Imager Scanning 1. Ensure that a scan-enabled application is load ed on the EDA. 2. Aim the scan win dow at the bar code. Figure 2-18 Imager Scanni ng 3. Press the scan button. The red laser aiming p attern turns on to assist in aiming. Ensure the bar code is within the area formed by the bracket s in the aiming pattern. The S[...]

2 - 24 MC70 User Guide Figure 2-21 Pick List Mode with Multiple Bar Codes in Aiming Pattern 4. Release the scan button. Resetting the EDA There are two reset functions, war m boot and cold b oot . A warm bo ot restart s the EDA by closing all running programs. A cold boot also restart s the EDA, and also resets the clock. Dat a saved in flash memor[...]

Using the MC70 2 - 25 W aking the EDA The wakeup conditions define what actions wake u p th e EDA. These settings ar e con figur able and th e facto ry default settings shown in T able 2- 9 are subject to change/update. Locking the EDA Use the Device Lock feature to prevent use of the device . No te that when locked, the EDA does not respond to scr[...]

2 - 26 MC70 User Guide T o unlock the device and free it for use, tap Unlock . Figure 2-23 Unlock Device Window Ta p Unlock on the Unlock Device window .[...]

Chapter 3 Using Bluetooth Chapter 3 Using Bluetooth Introduction Bluetooth-equipped d evices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency ( RF) to transmit and receive dat a in the 2.4 GHz Industry Scientific an d Medica l (ISM) band (802.15. 1) . B lue to ot h wire l ess t ec hno l og y is spec ific[...]

3 - 2 MC70 User Guide Security The current Bluetooth specification defines security at the link level. Applicat ion-level security is not specified. This allows app lication deve lopers to de fine security mechanism s tailored to their spec ific need. Link-level security occurs between devices, not u sers, while applic ation-level se curity can be [...]

Using Bluetooth 3 - 3 Disabling Bluetooth T o disable Bluetooth, t ap Bluetooth icon - Disable Bluetooth . The Bluetooth icon changes to indicate that Bluetooth is disabled. Figure 3-1 Disable Bluetooth Enabling Bluetooth T o enable Bluetooth, t ap Bluetooth icon - Enable Bluetooth . The Bluetooth icon changes to indicate that Bluetooth is enabled.[...]

3 - 4 MC70 User Guide War m B o ot Performing a war m boot on the EDA r eturns Bl uetooth to the last state after initi a lization. Suspend Suspending the EDA turns of f Bluetooth. Resume When the EDA resumes, Bluetooth tu rns on if it was on prior to suspen d. Modes The BTExplorer applicatio n has two mode for managi ng Bluetooth connections: Wiza[...]

Using Bluetooth 3 - 5 3. Select an ac tion from the drop-down list. Option s include: • Explore Services on Remote Device • Pair with a Remote Device • Active Sync via Bluetooth • Browse Files on Remote Device • Connect to Headset • Connect to Internet Using Access Point • Connect to Internet Using Phone/Modem • Connect to a Persona[...]

3 - 6 MC70 User Guide 6. Select the Save As Favorite check box to save this service in the Favorite view . 7. In the Favorite Name text box, enter a name for this service that will appear in the Favorite list. 8. Ta p Next . The Connection Summary window appea rs. Figure 3-6 Connection Summary W indow 9. Ta p Connect to conne ct to the service. Exp[...]

Using Bluetooth 3 - 7 Y ou can also use the “tap a nd hold” tech nique to view availab le options. Scroll bars and view options are similar to those on the Wind ows deskt op. The tr ee structur e lists the following sub -items: • Local Device - This EDA • Remote Device - Other Bluetoot h devices - T rusted Devices - Bonded (p aired) Bluetoo[...]

3 - 8 MC70 User Guide 4. T ap and hold Remote Devices and select Discover Devices from the pop-up m enu . T he EDA searches for Bluetooth devices in the area. Figure 3-9 Discover Devices The discovered devices di splay in the Untrusted Devices folder . Figure 3-10 Discovered Devices Listed in Untrus ted Folder Bonding with Discovered Device(s) A bo[...]

Using Bluetooth 3 - 9 T o bond with a discovered Bluetooth device: 1. Discover remote devices. See Discovering Bluetooth Device(s) on page 3-7 . 2. In the Untrusted Devices fold er , tap and hold on a device to pair with. Figure 3-11 Pairing a Remote Device 3. Select Pair from the pop-up menu. The PIN Code Request window ap pears. Figure 3-12 PIN C[...]

3 - 10 MC70 User Guide 6. The devices p air and the device name moves to the T rusted Devices folder . Figure 3-13 Bonded (Paired) Discovered Device Renaming a Bonded Device T o rename a bonded device: 1. Launch BT Explorer . 2. T ap and hold the device to rename. Figure 3-14 Rename Device Selection Dialog Box[...]

Using Bluetooth 3 - 11 3. Select Rename in the pop- up menu. The Chan ge Device Name window appears. Figure 3-15 Change Device Name W indow 4. Enter a new name for the bonded device in the text box. T ap OK . Deleting a Bonded Device T o delete a device no longer needed: 1. Launch BTExplorer . 2. T ap and hold the device to delete and select Delet [...]

3 - 12 MC70 User Guide Accepting a Bond When a remote device want s to bond with the EDA, enter a PIN when req ue s ted to grant permission. 1. Ensure that the EDA is set to discoverable and connect able. See Bluetooth Settings on pa ge 3-25 . When prompted to bond with the remote device the PIN Cod e Request window appears. Figure 3-17 PIN Code Re[...]

Using Bluetooth 3 - 13 The EDA communicates with the remote de vice and lists the service s under the device name. Figure 3-19 List of Discovered Services Some examples of available services ar e: • File T ransfer Services • Dial-Up Networking Services • OBEX Object Push Services • Headset or Hands-Free Services • Serial Port Services. Se[...]

3 - 14 MC70 User Guide 8. Select a folder . The contents of the folde r appear in the sub-window . Figure 3-20 Remote Device Folders 9. T ap and hold on the file. A pop-up men u appears. 10. Select the action to perform: • New - create a new file or folder on the remote device • Delete - delete the selected file on the remote device. • Get Fi[...]

Using Bluetooth 3 - 15 Copying a File T o copy a file to a remote device: 1. T ap and hold on the file an d se lec t Put . The Send Local File window appears. 2. Navigate to the direc tor y to sa ve the file and select a file. 3. Ta p Open . The file copies from the EDA to the remote device. Connecting to the Internet Using an Access Point This sec[...]

3 - 16 MC70 User Guide Before setting up dial-up networking, obtain dial-up in formation an d other necessary setting s for the office network or ISP . T o crea te a new Blue to ot h co nn ec tio n: 1. Ensure the EDA is discoverable and connect able. See Bluetooth Settings on page 3-25 . 2. Discover and bond ( p air) with the remote device. See Bon[...]

Using Bluetooth 3 - 17 10. In the User name: text box, enter the user na me for this connection. 11 . In the Pa ssword: text box, enter the passw ord for this connection. 12. In the Domain: text box, enter the domain fo r this connection, if required. 13. Ta p OK . The phone begins dialing, then conne cts to the network. Figure 3-23 Connecting to B[...]

3 - 18 MC70 User Guide Adding a Dial-up E ntry T o add a dial-up entry: 1. In the Select Dial-up Networking En try window , tap and hold, then select Ad d E nt r y from the pop-up m enu. Figure 3-25 Add Dial-Up Entry The Add Phone Book Entry window appear s. 2. In the Name for the connection: text box, enter a name for this connection. 3. In the Co[...]

Using Bluetooth 3 - 19 Object Exchange Push Services Object Exchange (OBEX) is a set of pr otocols that allows sharing objects such as Cont act s or pictures using Bluetooth. T o exchange cont act information with another Bluetooth enabled device: 1. Ensure the EDA is discoverab le and conn ectable. See Bluetooth Settings on page 3-25 . 2. Discover[...]

3 - 20 MC70 User Guide 8. Ta p . T h e Select Contact En try window appears. Figure 3-27 Select Contact Entr y Window 9. Select a cont act to send to the other device. 10. Ta p OK . 11 . Ta p OK to send the cont act to the other device a nd display a confirmation dialo g box on the other device to accept the contact. A Send Contact dialog appears. [...]

Using Bluetooth 3 - 21 6. T ap an d hold on OBEX Object Push and select Connect . Th e OBEX Object Push window appears. Figure 3-28 OBEX Object Push Window 7. In the Action: drop-down list, select Send A Picture . 8. Ta p . T h e Send Local Picture window appears. Figure 3-29 Send Loca l Picture Window 9. Navigate to the pictur e to sen d to th e o[...]

3 - 22 MC70 User Guide 4. Select the T rusted Dev ice s folder . 5. T ap the remote device folder . 6. T ap and hold on the remote device and select Exp lore . A headset service item appears. 7. T ap and hold on th e headset service n ame and select Connect . The EDA connect s to the headset. Refer to the headset user man u al for instr u ctio ns o[...]

Using Bluetooth 3 - 23 ActiveSync Using Serial Port Services Use the wireless Bluetooth ser ial port connection for Ac tiveSync just as you would a physica l serial cable connection. Y ou must conf igure the application that will use the connection to the correct serial port. T o establish an ActiveSync connection: 1. On the hos t computer , e nsur[...]

3 - 24 MC70 User Guide 9. Ta p OK . The mo bile comput er communi cates with th e host computer and ActiveSync initates. Personal Area Network Services Connect two or more Bluetooth devices to share files, collaborate, or pl ay multi-player games. T o establish a Personal Area Network conn ection: 1. Ensure the EDA is discoverable and connect able.[...]

Using Bluetooth 3 - 25 Bluetooth Settings Use the BTExplorer Settin gs window to configure the oper ation of the BTExplorer application. T ap T ools - Settings . The BTExplorer Settings window appears. Device Info T ab Use the Device I nfo tab to configur e the EDA ’s Bluetooth connec tio n mo d es. Figure 3-33 BTExplorer Settings - Device Info T[...]

3 - 26 MC70 User Guide T o add a service: 1. Ta p Add . The Add Loca l Service window displays. Figure 3-35 Add Local Service Wi ndow 2. In the list, select a service to add. 3. Ta p OK . The Edit Local Service window displays for the selected service. 4. Select the appropriate info rmation and then tap OK . See the following sections for informati[...]

Using Bluetooth 3 - 27 File T ransfer Service File transfer allows ot he r Blue to ot h de vice s to browse files. Figure 3-37 File T rans fer Informa tion Window Hands-Free Service Hands-Free Service allows conn ection to hands-free device s. Figure 3-38 Hands-Fr ee Service Window Service Name Displays the na me of the ser v ice. Service Security [...]

3 - 28 MC70 User Guide Headset Service Headset Service allows conn ection to headset devices. Figure 3-39 Headset Service Windo w OBEX Object Push Service OBEX Object Push allows othe r Blue to o th devices to pu sh contacts, business cards, pictures, appoin tments, and tasks to the EDA. Figure 3-40 OBEX Exchange Information Window Service Name Lis[...]

Using Bluetooth 3 - 29 Personal Area Networking Service Personal Area Networ king hosts a Personal Area Networ k which allows communicati on with other Bluetooth device s. Figure 3-41 Personal Area Networking W indow Serial Port Service Serial port allows other Bluetooth devices to access COM por t s. Figure 3-42 Serial Port Service W i ndow Servic[...]

3 - 30 MC70 User Guide Security T ab T o adjust the security settings for an individual service, select the Services tab first, then select the individu al service, then Propertie s . Figure 3-43 BTExplorer Settings - Security T ab Service Name Displays the na me of the service. Service Security Select the type of securi ty from the drop-down list.[...]

Using Bluetooth 3 - 31 Discovery T ab Use the Discovery tab to set and modify discovered devices. Figure 3-44 BTExplorer Setting s - Discovery T ab Virtual COM Port T ab Use the V irtual COM Port tab to select the COM port s for Bluetooth communication. Figure 3-45 BTExplorer Settings - Virtu a l COM Port T ab Inquiry Length Sets the amount of time[...]

3 - 32 MC70 User Guide Miscellaneous T ab Figure 3-46 BTExplorer Settings - Miscellaneous T ab Highlight Connections Select the connection ty pe to highlight when connected. In th e Wizard Mode, the only options are Favorites or None . In t he Explorer Mode the options ar e None , T ree View Only , List V i ew Only , or Tr e e and List V iew . Appl[...]

Chapter 4 Using the MC7004/MC7094 Phone Chapter 4 Using the MC 7004/MC7094 Pho ne Introduction Use the MC7004 and MC7094 ph one to make phone calls, se t up speed dials, keep track of calls, and send text messag es. Y our wireless service provid er may al so provide other services such as voice mail, call forwarding, an d caller ID. Also use the in[...]

4 - 2 MC70 User Guide T o receive calls when the EDA is suspended, leave th e phone radio tu rned on and ensure the EDA is set to wake with any key . Making a Call Using the Keypad Dial phone calls from the ph one keypad using speed dial or from call history. The most dir ect method is using the phone keyp ad. T o make a call using the phone keyp a[...]

Using the MC7004/M C7094 Phone 4 - 3 Answering a Call A dialog box appear s on the EDA when it receives an in coming call. If the phone is s et to ring, a ring tone sounds. Answer or ignore the inco ming call. T o answer an incoming call tap Answer on the Phone - Incoming... dialog or pre ss the green phone key on the EDA keypad. Figure 4-3 Incomin[...]

4 - 4 MC70 User Guide Incoming Call Features • If you receive a call wh ile in a call, tap Wai t to place the call in call waiting. • Y ou can use oth er programs on the EDA duri ng a call. T o switch back to Phone, tap Ta l k or t ap Sta r t - Phone . T ap End to end the call. • If a caller isn't in your contact list, create a cont act [...]

Using the MC7004/M C7094 Phone 4 - 5 T a king Notes T o create a note during a call, t ap Note on the display , then enter the note. For more inform ation about creating notes see the Windows On-Device Help. T o access a note created during a call: 1. Ta p Sta r t - Phone or press the green phone ke y on the EDA ’s keyp ad. 2. From the Phone keyp[...]

4 - 6 MC70 User Guide Using Speed Dial Create speed dial numbe rs to dial fre quently calle d numbers wit h a single tap. Be fore creatin g a speed dial entry , ensure the phone numbe r exist s in Contacts. Adding a Speed Dial Entry T o add a speed dial entry from the phone keyp ad: 1. Ensure the contact and ph one number are in the Contact s list.[...]

Using the MC7004/M C7094 Phone 4 - 7 6. Ta p ok to add the co ntact to the sp ee d dial list . Figure 4-10 Speed Dial Cont act List 7. Ta p ok to exit the Spe ed Dial Contact List . T o add a speed dial entry from the Cont acts window: 1. Ta p Sta r t - Contacts . Figure 4-11 Cont acts 2. T ap an d hold the contact name. Figure 4-12 Contacts Menu[...]

4 - 8 MC70 User Guide 3. Ta p Add to Speed Dial . Figure 4-13 Speed Dial Cont act Location 4. T ap the up/d ow n ar ro ws to se lec t an av aila ble loca tio n to assig n as the ne w sp ee d dia l ent ry . The first speed dial location is reserved for voice mail. 5. Ta p ok . Editing a Speed Dial Entry 1. Ta p Sta r t - Ph one or press the green ph[...]

Using the MC7004/M C7094 Phone 4 - 9 3. T ap an d hold the contact name. Figure 4-15 Speed Dial De lete Menu 4. Ta p Edit... . 5. Change the name, phone number , or location information. 6. Ta p ok . Deleting a Speed Dial Entry 1. Ta p Sta r t - Phone or press the green phone ke y on the EDA ’s keyp ad. 2. Ta p Speed Dial . 3. T ap an d hold the [...]

4 - 10 MC70 User Guide 5. Ta p Ye s to confirm permanently deleting the speed dial entry . Making a Speed Dial Call Use S peed Dial to call someone saved in the speed d ial directory . T o make a speed d ial call: 1. Ta p Sta r t - Ph one or press the green phone key on th e EDA ’s keypad. 2. From the Phone ke ypad, ta p and hold the sp eed dial [...]

Using the MC7004/MC7094 Phone 4 - 11 Using Call History Use Call History to call someone who wa s recently called, or recently calle d in. Call History provides the time and duration of all incoming, outgoing , an d missed calls . It also provides a summary of tota l calls an d easy access to notes taken during a call. T able 4- 1 lists the call hi[...]

4 - 12 MC70 User Guide Managing Call History Change views, reset the call timer , and delete calls to manage the calls stored in Call History . Changing the Call Histo ry View 1. Ta p Sta r t - Ph one or press the green phone key on the EDA ’s keypad to displa y the Pho ne keypad. 2. From the Phone keypad, t ap Call History . 3. Ta p Menu - Filte[...]

Using the MC7004/MC7094 Phone 4 - 13 4. Select Call Timers... . Figure 4-21 Call History - Call Timers 5. Ta p Reset . (The All Calls: coun te r ca nn ot be reset.) 6. Ta p ok to exit the Call Timers window . Deleting Call History Items by Call Date 1. Ta p Sta r t - Phone or press the green phone key o n the EDA ’ s keypad to display the Pho n e[...]

4 - 14 MC70 User Guide Deleting All Call History Items 1. Ta p Sta r t - Ph one or press the green phone key on the EDA ’s keypad to displa y the Pho ne keypad. 2. From the Phone keypad, t ap Call History . 3. Ta p Menu . Figure 4-23 Call History - T ools Menu 4. Select Delete all calls . Figure 4-24 Call History - Delete All Dialog 5. Ta p Ye s [...]

Using the MC7004/MC7094 Phone 4 - 15 3. T ap an entry in the list to see the date, time, and duration of a call. Figure 4-25 Call History - Detail 4. Ta p ok to exit. Using the Call History Menu Use the Call History menu to dial vo ice mail, access the Activation Wiza rd, save to contacts, view a note, delete a listing, send an SMS, and make a call[...]

4 - 16 MC70 User Guide Using Contacts Use Conta cts to make a call without loo k ing up or entering th e phone number . T o make a call from Con tacts: 1. Ta p Sta r t - Contacts . 2. From the cont act list, tap and hold the contact name. Figure 4-27 Contacts Menu 3. Ta p Call Work . Swapping Calls T o move between two or more phone calls: 1. Ta p [...]

Using the MC7004/MC7094 Phone 4 - 17 3. Ta p Hold to place the first number on hold. 4. Enter the second number and tap Ta l k . Figure 4-29 Call Conferencing - Conferencing 5. Ta p Swap to move from one call to the other . 6. Ta p End or press the red phone key on the EDA keypad to end each call. Conference Calling T o create a conference phone se[...]

4 - 18 MC70 User Guide 6. Ta p Menu - Co nference to place the two numbers in conference mode. Figure 4-31 Creating a Conference Call 7. Ta p End or press the red phone key on the EDA keypad to end the con ference call. T e xt Messaging Use the T ext Messages window to send and rece ive text messages to and from mobile phones. The text can contain [...]

Using the MC7004/MC7094 Phone 4 - 19 3. T ap and hold on a cont act and select Send T ext Message . Figure 4-32 T ools Menu 4. On the T ext Messages window , enter your message. Figure 4-33 T ext Messages Window 5. Ta p Send to send the message. Address Area Send Button Message Area[...]

4 - 20 MC70 User Guide[...]

Chapter 5 Accessories Chapter 5 Accessories Introduction MC70 accessories, listed below , provide a variety of product su pport capabilities. Cables Snap one of the following cables on to t he EDA to connect an extern al device. • USB Client charge cable • RS232 charge cabl e • DEX cable • Modem inverter • Autocharge cable. Cradles • Si[...]

5 - 2 MC70 User Guide Headset Use the headset to communicate via V oice-Over-IP (VOIP) or for audio playback and teleph ony applications. T o connect the headset, remove the plug from the head set jack at the top of the EDA and inser t the headset connector . Contact a Symbol re presentative for comp atible headsets. For best performance , Symbol r[...]

Accessories 5 - 3 T o insert the MMC/SD card: 1. Power of f the EDA. 2. Remove the card cover on the side of the EDA by loosen ing the screws and lif ting the cover out of the slot. Figure 5-2 Card Cover Remo val 3. Insert the card with the card cont acts facing down and the cut corner on the right, until you feel a click. 4. Replace the housing co[...]

5 - 4 MC70 User Guide Charging the EDA Battery Connect the cradle to power . Insert the ED A into the EDA slot to begin charging. Figure 5-3 EDA Battery Charging Charging the Spare Battery Figure 5-4 Spare Battery Charging NOTE Use only a S ymbol-approved power supply output rated 12 Vdc and minimum 3.33A. The power supply is certified to EN60950 w[...]

Accessories 5 - 5 Battery Charging Indicators The Single Slot USB/Serial Cradle charges the EDA ’s main battery and a sp are battery simultaneously . The EDA ’ s charge LED indicates the st atus of the battery charging in the EDA. See T a b l e 1- 2 on page 1-7 for charging status indicatio n s. The spare batter y charging L ED on the cr adle i[...]

5 - 6 MC70 User Guide • Simultan eou sly charges up to four EDAs. Charging Insert the EDA into a slot to begin charging. Figure 5-5 EDA Battery Charging Battery Charging Indicators The EDA ’s cha r ge LED shows the status of the battery charging in the EDA. See T able 1-2 on page 1-7 fo r charging status indicatio n s. The st andard battery ful[...]

Accessories 5 - 7 VCD7000 V ehicle Cradle This section describes how to use a VCD7000 vehicle cradle with the ED A. For cradle installation and communication setup pr ocedures refer to the MC70 Integrator Guide . Once installed in a vehicle, the cradle: • holds the EDA securely in place • provides power for operating the EDA • provides a seri[...]

5 - 8 MC70 User Guide Removing the EDA T o remove the EDA, hold back the release lever on the cradle and pu ll the EDA up and out of the cradle. Figure 5-7 Removing the EDA Charging the Spare Battery Insert a sp are battery to begin charging: 1. Lift the battery rel ease lever . Figure 5-8 Inserting t he Spare Battery 2. Insert the spa re battery i[...]

Accessories 5 - 9 T o remove a spare batter y , hold back the battery releas e lever and lif t the battery from the spare battery slot. Figure 5-9 Removing t he Spare Battery Battery Charging Indicators The V ehicle Cradle charges the EDA ’ s ma in battery and a spare battery simulta neously . The EDA ’ s charge LED indicates the st atus of the[...]

5 - 10 MC70 User Guide Four Slot Spare Battery Charger This section describes how to use the Four Slo t S pare Battery Char ger to charge up to four MC70 spare batteries. MC70 Battery Shim Installation Before chargin g a spare batte ry , snap the MC70 sh im into the battery slot as shown in Figure 5-10 . Figure 5-10 MC70 Spare Batte ry Shim Install[...]

Accessories 5 - 11 Spare Battery Charging 1. Connect the charger to a power source. 2. Insert the spare ba ttery into a spare ba tter y charging well and gently press down on the battery to en sure proper cont act. Figure 5-11 Four Slot Spare Battery Charger Battery Charging Indicators The charger has an ambe r LED for each battery charging well. S[...]

5 - 12 MC70 User Guide Magnetic Stripe Reader (MSR) This section describes how to set up and use the snap-o n MSR with the EDA. The MSR snaps on to the bottom of the EDA and removes easily when not in use. When attach ed to the EDA, the MSR a llows the EDA to captur e data from ma gnetic stripe cards. T o download MSR data ca pture software, visit [...]

Accessories 5 - 13 Using the MSR The MSR3000 sample application illustrates how an applicat ion handles MSR input (refer to Symbol Applications User ’s Guide ). T o use the MSR: 1. Attach the MSR to the EDA. 2. Power on the EDA. 3. Install the MC70 Demo applicatio n onto the EDA. The demo is available with the SMDK. See the MC70 Integrator Guide [...]

5 - 14 MC70 User Guide Inserting the EDA into the T rigger Handle Slide the EDA into the T rigger Handle until it locks in place. The release secures the EDA to the T r igger Handle. Figure 5-14 Inserting the EDA into the T rigger Ha ndle Removing the EDA T o remove th e EDA, pr es s the rele as e do wn and pu ll th e EDA for w a rd. Figure 5-15 Re[...]

Accessories 5 - 15 3. Pull the trigger on the handle. The Scan/Decode L E D lights and a be ep sounds to indicate a successful decode. Figure 5-16 Scanning with the T rigger Handle Using a Cradle T o charge the EDA ’ s battery while the EDA is in the T rig ger Handle, insert the EDA in to e ither the Single-Slot USB/Serial cradle or the Four-Slot[...]

5 - 16 MC70 User Guide Cables This section descri be s how to set u p and u se the ca bles . The cables are available with a variety of conne ction capabilities. The following communication/charg e ca bles are available: • Serial (RS232) Char ge cable (9-pin D female with power input recept a c le) • USB Client Charge cable (st andard-A connect[...]

Accessories 5 - 17 Battery Charging and Operating Power The communication/charge cable s can charge the EDA battery and supply opera ting power . T o charge the EDA battery: 1. Connect the communication /charge cable power inpu t connector to the Symbol approved power source. 2. Slide the bottom of the EDA into the connecto r end of the commun icat[...]

5 - 18 MC70 User Guide[...]

Chapter 6 Maintenance & T roubleshooting Chapter 6 Maintenance & Troublesho oting Introduction This chapter includes instruction s on cleaning and storing the EDA, and provides tr oublesho oting solution s for potential problems during EDA op eration. Maintaining the EDA For trouble-free service, obse rve the following tips when using the E[...]

6 - 2 MC70 User Guide T roubleshooting EDA T able 6-1 T roubleshooting the EDA Problem Cause Solution EDA does not turn on. Lithium- ion battery not charged. Charge or replace the lithium-ion batte ry in the EDA. Lithium-ion battery not installed properly . Install th e batter y properly . See Installing and Removin g the Main Battery on p age 1-4 [...]

Maintenance & Troubleshooting 6 - 3 T apping the window buttons or icons does not activate the corresponding feature . Screen is no t calibrated correctly . Re-calibrate the screen. See Calibra ting the Screen on p age 1-8 . The system is not responding. W arm boot the system. See Resetting the EDA on page 2-24 . A message app ea rs stating tha[...]

6 - 4 MC70 User Guide Bluetooth Connection T able 6-2 T roubleshooting Bluetooth Co nnection Problem Cause Solution EDA cannot find any Bluetooth devices nearby . T oo far from other Bluetooth devices. Move closer to the other Bluetooth device(s), within a r ange of 10 meters. The Bluetooth devic e( s) nearby are not tur ned on. T urn on the Blueto[...]

Maintenance & Troubleshooting 6 - 5 Piconet (the connection between a Bluetooth master and one or more Bluetooth slaves) drops. The EDA suspends and the Bluetooth radio powe r turns of f. One of the devices are out of range. An application can reg ister for no tification of an EDA resume by creating a message queue using th e CreateMsgQueue() A[...]

6 - 6 MC70 User Guide Single Slot USB/Serial Cradle T able 6-3 T roubleshooting the Single Slo t USB/Serial Cradle Symptom Possible Cause Action LEDs do not light when EDA or spar e battery is inserted. Cradle is not receiving power . Ensu re the pow er cable is connecte d securely t o both the cradle an d to AC power . EDA is not seated firmly in [...]

Maintenance & Troubleshooting 6 - 7 Four Slot Ethernet Cradle T able 6-4 T roubleshooting the Four Slot Eth ernet Cradle Symptom Cause Solution Attempt by the EDA to ActiveSync failed. EDA removed from the cradle while the LED was blinking gr een. W ait one minute and reinsert the EDA in the crad le. This allows the cradle to attempt anot her s[...]

6 - 8 MC70 User Guide V ehicle Cradle Four Slot Spare Battery Charger T able 6-5 T roubleshooting the V ehicle Cradle Symptom Possible Cause Action EDA battery charging LED does not light up. Cradle is not receiving power . Ensure the power input cable is securely conn ected to th e cradle’ s power port. EDA battery is not recharging. EDA was rem[...]

Maintenance & Troubleshooting 6 - 9 Cables Magnetic Stripe Reader T able 6-7 T roubleshooting the Ca bles Symptom Possible Cause Action EDA battery is not charging. ED A was disconn ected from AC power too soon. Connect the power cable correctly . Confirm main battery is charging under St art - Settings - System - Power . The stand ard capacity[...]

6 - 10 MC70 User Guide T rigger Handle During dat a communication, no dat a transmits, or transmitted dat a was incomplete. EDA detached from MSR during communications. Reatta ch EDA to MSR and retransmit. Incorrect cable configurat ion. See the system administrator . Communication sof tware is not installed or configured properly . Perform setup a[...]

Appendix A T echnical Specifications Chapter A Appendix A Technical Spec ifications MC70 T e chnical Specifications The following tables summarize the EDA ’s intende d operat ing environment and technical hardware sp ecifications. T able A-1 EDA T echnical Specifications Item Description Physical Chara cteristics Dimensions 6 in. L x 3 in. W x 1.[...]

A - 2 MC70 User Guide Operating System Microsoft ® Windows Mobile™ 2005 Memory 64MB RAM/128MB ROM Interface/Communications RS-232, USB 1.1 User Environment Operating T emperature 14°F to 155°F / -10°C to 68°C S torage T emperature -40° F to 140° F / -40° C to 60° C Charging T emperature 32°F to 104°F / 0° C to 40° C Humidity 95% non-[...]

Technical Specifications A - 3 Linear 1D Scanner (SE800HP) Spe cifications Optical Resolution 0.005 in. minimum e l ement wid t h Roll +/- 30° from vertical Pitch Angle +/- 65° from normal Skew T olerance +/- 60° from normal Ambient Light Sunlight: 8,000 ft. candles (86,1 12 Lux) Artifical Light: 450 ft. candles (4,844 Lux) Shock 2,000 +/ - 5% G[...]

A - 4 MC70 User Guide MC70 Accessory Specifications T able A-2 Single Slot USB/Serial Crad le T echnical Specifications Feature Description Dimensions 4.3 in. L x 2.3 in. W x 3.2 in. H (10.92 cm L x 5.84 cm W x 8.13 cm H) We ight 6.9 oz (196 g) Power 12 V Interface USB, Seri al Operating T emperature 32° to 122° F (0° to 50° C) S torage T emper[...]

Technical Specifications A - 5 T able A-4 Four Slot Spare Battery Charge r T echnical Specifications Feature Description Dimensions 8.25 in. L x 6.0 in. W x 1.7 in. H (20.96 cm L x 15.24 cm W x 4.32 cm H) We ight 13.6 oz (386 g) Power 12 V Operating T emperature 32° to 104° F (0° to 40° C) S torage T emperature -40° to 158° F (-40° t o 70° [...]

A - 6 MC70 User Guide[...]

Glossary A API. An interface by mean s of which o ne softwar e compone nt co mmunicates with or controls another. Usually used to refer to services provided by one soft ware componen t to another, usually via software interrupts o r function calls Aperture. The opening in an optical system defined by a lens or baffle that establis hes the fi eld of[...]

Glossary - 2 MC70 User Guide Bit. Binary dig it. One bit is the basic unit of bi nary inform a tion. Generally, eight consecutiv e bits compose one byte of data. The pattern of 0 and 1 values within the byte determ ines its me aning. Bits per Second (bps). Bits tra n smitted or received. BOOTP. A protocol for remote booting of disk less device s. A[...]

Glossary - 3 Code 93. An industr ial symbology compatible with Code 39 but of fering a full character ASCII set and a higher coding density than Code 39. Code Length. Number of data characte rs in a ba r cod e bet w ee n t he start and stop characters, not including those characters. Cold Boot. A cold boot restarts the mobile computer and er ases a[...]

Glossary - 4 MC70 User Guide DTE. See Data Terminal Equipment . E EAN. European Article Nu mb e r. Th is Eur o pean /I nternatio nal ver sio n of th e UPC prov ides its own coding for mat an d symbology standards. Element dimen sions are specif ied metrically. EAN is us ed primarily in retail. Element. Generic ter m for a bar or space. Encoded Area[...]

Glossary - 5 IEC. International Electrotechnical Commission. This internati ona l agency regulate s laser safety by sp ec ifying various laser operation classes based on po wer output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification. Co nformity is ensured through a softwa re restriction of 120 seconds of laser[...]

Glossary - 6 MC70 User Guide K Key. A key is the specific code used by the alg o rithm to encrypt or decryp t the data. Also see, Encryption and Decrypting . L LASER. Light Amplification by Stimulated Emis sion of Radiation.T he laser is an inte nse light sour ce. Light fro m a laser is all the same frequency, unlike the output of an incande scent [...]

Glossary - 7 Mobile Compute r. In this text, mobile computer refers to th e Symbol Ser ies 9000 wirele ss portable computer. It ca n be set up to run as a stand-alone de vi ce, or it can be set up to communicate with a network, using wireles s radio technology. N Nominal. The exact (or ideal) intended value for a specified pa rameter. Tolera nces a[...]

Glossary - 8 MC70 User Guide Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approac h near 100%. PING. (Packet Internet Groper) An Internet utility used to deter mine whether a partic ular IP address is online. It is u[...]

Glossary - 9 Scanner. An electronic device u sed to scan bar code symbols and pr odu ce a digitized pattern that co rresponds to the bars and spaces of the symbol. Its three main components are: 1) Light sou r ce (laser or photoelectric cell) - illuminates a bar code,; 2) P hotodetector - registers the di fference in reflec ted light (more light re[...]

Glossary - 10 MC70 User Guide Symbol Length. Length of symbol me asured f rom the be ginning of the quiet zo ne (margin ) adjacent to the start character t o the end of the qu iet zone (m argin) adja cent to a st op chara cter. Symbology. The structural rules a nd conventions for representing da ta within a particu lar bar code type (e.g . UPC/EAN,[...]

Glossary - 11 ignored, because there is no time to re transmit. If UDP is used and a reliab le delivery is required, packet sequence checking an d error notific ation mu st be written into the ap plications. UPC. Universal Product Code. A relatively comple x numeric symbology. Each characte r consists of two bars and two spaces, eac h of which is a[...]

Glossary - 12 MC70 User Guide[...]

Index Numerics 1-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 A accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 auto charge cable . . . . . . . . . . . . . . . . . . . . . . . . 1-3 cables . . . . . . . . . . . [...]

Index - 2 MC70 User Guide turning on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 bonding, bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 boot cold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24, 3-3 warm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24, 3-4 bullets . . . .[...]

Index - 3 ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1, 2-4 bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1, 2-4 email . . . . . . . . . . . . . . . . . [...]

Index - 4 MC70 User Guide key descriptions . . . . . . . . . . . . . . . . . . . . . . . . 2-13 R removing main battery . . . . . . . . . . . . . . . . . . . . . . . . 1-5 renaming bluetooth bond . . . . . . . . . . . . . . . . . . . . . 3-10 reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24 hard . . . . . . . . .[...]

Index - 5 wireless status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Z Zebra printer cable . . . . . . . . . . . . . . . . . . . . . . . . . 5-16[...]

Index - 6 MC70 User Guide[...]

Thank you for your input—We value your comments. Tell Us What You Think... We ’d like to know what you think about this Manual. Please take a moment to fill out th is questionnai re and fax this form to: (631) 738-3318, or mail to: Symbol T echnologies, Inc. One Symbol Plaza M/S B-4 Holtsville, NY 11742-1300 Attention: T echnical Publications M[...]

[...]

[...]

Symbol T echnologies , Inc. One Symbol Plaz a Holtsville, New Y ork 11742-1300 http://www .symbol.com 72E-71769-01 Revision B - August 2006[...]