Toshiba M5 SERIES manuel d'utilisation

G M A D0 0105010 12 /0 6 If you need assistance: ❖ T oshiba’ s Support W eb site pcsupport.toshiba.com ❖ T oshiba Global Support Centre Calling within the United States (800) 457 -7777 Calling from outside the United States (949) 859 -4273 For more in formation, see “If Something Goes Wrong” on page 176 in this gui de. Te c r a ® M5 Seri[...]

2 5.375 x 8.375 ver 2.3 Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling . Model: T e c r a ® M5 S e r i e s Recordable and/or ReWritable Drive(s) and Associated Software W arranty The computer system you purchased may[...]

3 5.375 x 8.375 ver 2.3 Critical Applications The computer you have purchased is not designed for any “critical applications. ” “Critical applications” means life s upport sy stems, medical applications, connections to implanted medi cal de vi ces, commercial transportation, nuclear facilities or systems or an y other applicatio ns where pr[...]

4 5.375 x 8.375 ver 2.3 This device complies with P art 15 of the FCC Rules. Operation is subject to the following tw o conditions: ❖ This device may not cause harmful interference. ❖ This device must accept an y interferen ce received, including interference that may cause undesired operatio n. Contact either: ❖ T oshiba’ s Support W eb si[...]

5 5.375 x 8.375 ver 2.3 Connection to party line service is subject to state tarif fs. Contact the state public utility commission, public se rvice co mmission or corpor ation commission for information. T elephone Company Procedures The goal of the telephone company is to pro vide you with the best service it can. In order to do this, it may occas[...]

6 5.375 x 8.375 ver 2.3 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your al arm equipment. If you hav e questions abou t what will disable alarm equipment, consult your telephone compan y or a qualified installer . Instructions for IC CS[...]

7 5.375 x 8.375 ver 2.3 Wireless Interoperability The TOSHIB A W ireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology , and is compliant to: ❖ The IEEE 802.11 Standard on W ireless LANs (Rev ision A/B/G), as defined and approv ed [...]

8 5.375 x 8.375 ver 2.3 In some situations or en vironments, the use of W ireless LAN may be restricted by the proprietor of the b uilding or responsible representativ es of the organization. These situatio ns may for e xample include: ❖ Using the W ireless LAN equipment on board airplanes, or ❖ In any other en vironment where the risk of inter[...]

9 5.375 x 8.375 ver 2.3 The term “IC” before the equipment certif ication number only signifies that the Industry Canada technical specifications were met. T o prev ent radio interference to the licensed service, this device is intended to be operated indoors an d away from windo ws to pr ovide maximum shielding. Equipment (or its transmit ante[...]

10 5.375 x 8.375 ver 2.3 Modem W arning Notice Conformity Statement The equipment has been approved to [C ommission Deci sion “CTR-21”] for pan- European single terminal connection to the Public Switched T elephone Netw ork (PSTN). Howe ver , due to differences between the indi vidual PSTNs provided in dif ferent countries/re gions the approv a[...]

11 5.375 x 8.375 ver 2.3 1. Sticker Please put the following stick er on devices incorpora ting this product. 2. Indication The indication shown belo w appears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. O F: This equipment uses OFDM modulation. 3 The interference range of this e[...]

12 5.375 x 8.375 ver 2.3 J AP AN APPR O V ALS INSTITU TE FOR TELECOMMUNICA TIONS EQUIPMENT Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Ap prov al Number: 03NY .A0018, 03GZD A0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wire less module into other device. ❖ 5.17 GHz [...]

13 5.375 x 8.375 ver 2.3 802.11b (2.4 GHz) Europe - Restrictions for us e of 2.4 GHz Frequencies in European Community Countries Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembour g Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA België/ Belgique: For pri vate usage outsid[...]

14 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Tu r b o M o d e ( 5 G H z ) Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries O: allowed x: forbidden ❖ T o remain in conformance with Euro pean spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply . The user should use the [...]

15 5.375 x 8.375 ver 2.3 location and consult the local technical support staff responsible for the wireless network. ❖ The 5 GHz T urbo mode feature is not allowed for operation in any European Community co untry . ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands i n the European Community . Ad-h oc mode prov[...]

16 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Tu r b o M o d e ( 5 G H z ) Approved Countries/Regions for use for the Intel ® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approv ed to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Aust[...]

17 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use for the T oshiba Mini PCI Wireless LAN Card This equipment is approv ed to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Approved Countries/Regions for use Intel ® PRO/Wireless 3945ABG [...]

18 5.375 x 8.375 ver 2.3 802.11a (5 GHz) Bluetooth ® Wireless T echnolo gy Interoperability Bluetooth ® Cards from TOSHIB A are designed to be interoperable with an y product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio t echnology , and is compliant to: ❖ Bluetooth Specification as def ined[...]

19 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use ( Bluetooth ® wireless technology) Bluetooth ® Card from T oshiba equipment is ap proved to the radio standard by the countries/regions in the follo wing table. Do not use this equipment except in th e countries/regions in the follow ing table. Bluetooth ® Wireless T echnology and Y our[...]

20 5.375 x 8.375 ver 2.3 ❖ Using the equipment with Bluetooth wireless technology on bo ard airplanes, or ❖ In any other en vironment where the risk of interference to other devices or services is perceiv ed or identified as harmful. If you are uncertain of the policy that applies on the us e of wireless de vices in a specific or ganization or [...]

21 5.375 x 8.375 ver 2.3 The legal communications mentioned in the abov e item refer to radio communications operated in accordan ce with telecommunication laws and regulations. Lo w power radio frequency electric machin ery shall resist ag ainst interference from legal communications or from industrial, scientific and medical radio emission electr[...]

22 5.375 x 8.375 ver 2.3 3. TOSHIB A Direct PC Monday – Friday: 10: 00 – 17:00 T oll Free T el: 0120-15-1048 Direct Dial: 03-3457-4 850 Fax: 0 3-3457-4868 Device Authorization This device obtains the T echnical Regu lation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radi[...]

23 5.375 x 8.375 ver 2.3 Location of the Required Label (Sample shown belo w . Location of the la bel and manufacturing information may va ry.) This appliance contains a laser syst em and is classified as a CLASS 1 LASER PRODUCT . T o use this model prop erly , read th e user’ s guide carefully and keep it for your fut ure reference. Never attemp[...]

24 5.375 x 8.375 ver 2.3 Export Administration Regulation This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and ma y be subject to the approval of the U.S. Department of Commerce prior to expor t. Any export, directly or indirectly , in contrav ention of the U.S. Export Ad ministration Re[...]

25 5.375 x 8.375 ver 2.3 T rademarks T ecra and Accu point and SelectBay are registered trademarks of T oshiba America Information System s, In c. and/or T oshiba Corporation. Microsoft and W indows are re gistered tr ademarks of Microsoft Corporation in the United States and/or other countries. DirectX, Activ e Desktop, DirectShow , and W indows M[...]

26 5.375 x 8.3 75 ver 2.3 Contents Introduction ................ ................................................................ 34 This guide ...............................................................35 Safety icons ............................................................36 Other icons used ...............................................[...]

27 Contents 5.375 x 8.3 75 ver 2.3 Using the computer for the first time ...................... 46 Opening the display panel ................................. 46 Your computer’s features and specifications ....47 Turning on the power ........................................47 Adding memory (optional) ...................................... 48 Inst[...]

28 Contents 5.375 x 8.3 75 ver 2.3 Cleaning the computer ...................................... 79 Moving the computer ........................................79 Using a computer lock ......................................80 Chapter 2: Learning the Ba sics ................................................. 81 Computing tips .........................[...]

29 Contents 5.375 x 8.3 75 ver 2.3 Chapter 3: Mobile Computin g ................................................... 98 Toshiba’s energy-saver design................................98 Running the computer on battery power ................99 Battery Notice ................................................... 99 Power management .....................[...]

30 Contents 5.375 x 8.3 75 ver 2.3 Surfing the Internet .........................................125 Internet features ..............................................125 Uploading to, and downloading files from the Internet .......................................125 Exploring audio features .......................................126 Recording sounds[...]

31 Contents 5.375 x 8.3 75 ver 2.3 Toshiba Application Installer ................................. 143 Setting passwords ................................................ 144 Using an instant password ..............................144 Using a supervisor password ..........................145 Using a user password ...................................1[...]

32 Contents 5.375 x 8.3 75 ver 2.3 Chapter 6: If Something Goes Wrong............ ........................ 176 Problems that are easy to fix ................................176 Problems when you turn on the computer ............177 The Windows ® operating system is not working ..180 Using Startup options to fix problems ............ 180 Internet p[...]

33 Contents 5.375 x 8.3 75 ver 2.3 Appendix A: Hot Keys .......... .............................. ...................... 208 Hot Key Cards .......................................................208 Using the Hot K ey Cards .................................209 Application Cards .................................................. 210 Using the Applica[...]

34 I n t roduct ion W elcome to the world of powerful, portable, multimedia computing. W ith your T osh iba notebook computer , your work and entertainment can accompan y you where ver you go. This notebook is compatible with European Union Dire ctive 2002/ 95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic e[...]

35 Introduction This guide 5.375 x 8.375 ver 2.3 The product specifications and configuration i nformation are designed for a product Series. Y our particular model may not have all the features and specifications listed or illustrat ed. For more detailed information about the features and spec ifications on your particular model, please visit T os[...]

36 Introd uction Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety inst ructions that must be observed to av oid potential hazards that co uld result in personal injuries, damage to your equipment, or loss of data. These safety cautions hav e been classif ied according to the seriousness of the risk, and icons highlight th[...]

37 Introduction Other documentation 5.375 x 8.375 ver 2.3 Other documentation Y our computer comes with the following documentation: ❖ An electronic version of the user’ s guide (this document ) ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit T oshiba’ s W eb site at accessori[...]

38 Chapter 1 Getting Started This chapter provides tips for working comfortably , su mmarizes ho w to connect components, and ex plains what to do the f irst time you use your notebook computer. Selecting a place to work Y our computer is portable and designed to be used in a variety of circumstances and locations. Creating a computer -friendly env[...]

39 Getting Started Selecting a place to work ❖ Extreme heat, cold, or humidity . ❖ Liquids and corrosi ve chemicals. Keeping yourself comfortable The T oshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for workin g comfortably throughout [...]

40 Getting Started Selecting a place to work ❖ Nev er turn off the computer if a dr i ve light indicates a driv e is activ e. T urning off the computer while it i s reading from or w riting to a disk/disc or flash media may damage the disk/disc or fl ash media, the dri ve, or both. ❖ Keep the computer and disks aw ay from objects that generate [...]

41 Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: Y ou must complete all setup steps up to and including “Setting up your software” on page 41 before adding external or internal components to your computer . These components include, but are not limited to, a mouse, keyboa rd, printer , memory , and PC Cards. [...]

42 Getting Started Re gistering your computer with T oshiba Registering your computer with T oshiba Product registration is strongly recommended, and allows T oshi ba to send you periodic updates, announcements , and special of fers applicable to your prod uct. Product registration can be completed during the initial start up process of your comput[...]

43 Getting Started Connecting to a po wer sour ce Connecting to a power source Y our computer requires power to operate. Use the po wer cord/cable and A C adaptor to connect the comput er to a liv e electrical outlet, or to charge the computer’ s battery . Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug dire[...]

44 Getting Started Connecting to a power so ur ce T o connect A C po wer to the computer: 1 Connect the po wer cord/cable to the A C adaptor . (Sample Illustration) Connecting the power cord /cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other[...]

45 Getting Started Char ging the main battery The computer’ s main battery light gi ves you an indication of the main battery’ s current char ge: ❖ Glows amber while the main battery is being charged (A C adaptor connected) ❖ Glows g r e e n when the main battery is fully charged ❖ Is unlit when the main battery has discharged, the batter[...]

46 Getting Started Using the computer for the fir st time Battery life and charge time may var y depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel 1 Slide the display latch to the right . 2 L[...]

47 Getting Started Using the computer for the f irst time Small bright dots m ay appear on your screen display wh en you turn on your computer . Y our display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high- precision technology . An y small bright dots that may appear on your display are an intrinsi[...]

48 Getting Started Adding memo ry (optional) 3 Press and hold the power b utton in until the on/ of f light on the system indicator panel glows g re e n —about one second. (Sample Illustration) T urning on the power The preinstalled operating syst em will load automatically . When you turn on the computer for the first time, do not turn off the p[...]

49 Getting Started Adding memory (optional) Installing a memory module Memory modules can be installed in the memory module slots on the base of the computer . Y ou will need a small Phillips screwdriv er for this procedure. If the computer has been running recently , the memor y module may be hot. The surrounding area may also be hot. Allow the mo[...]

50 Getting Started Adding memo ry (optional) 2 Click Shut Down . The operating system turns off the computer . 3 Unplug and remov e any cables connected to the computer , including the A C adaptor . 4 Remove the main battery . For information on removing the main battery , see “Removing the battery from the computer” on page 109 . 5 Close the d[...]

51 Getting Started Adding memory (optional) 8 Place the screw and the cov er in a safe place so that you can retriev e them later . Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touchi ng the connector on the memory modul[...]

52 Getting Started Adding memo ry (optional) 12 Firmly press the mem ory module into the me mory slot’ s socket at approximately a 30-de gree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module i nto the socket 13 Once the module’ s connector is fu lly inserted into the socket, press downw ard on[...]

53 Getting Started Adding memory (optional) (Sample Illustration) Inserti ng the memory m odule into the slot 14 Replace the memory modu le slot cov er and secure it using the screw . 15 Re-insert the main battery . For mo re information on inserting the main battery , see “Inserting a char ged battery” on page 111 . 16 T urn the computer right[...]

54 Getting Started Adding memo ry (optional) Removing a memor y module If you need to remove a memory module: 1 Complete steps 1 – 8 in “Installing a memory modu le” on page 49 to shut down the computer an d open the memo ry module slot cov er . Do not try to remove a memor y module with the computer turned on. Y ou can damage the computer an[...]

55 Getting Started Adding memory (optional) 3 Gently lift the me m o ry module to a 30-degree angle and slide it out of the slot. (Sample Illustration) Removing the memory module 4 Replace the memory modu le slot cov er and secure it using the screw . 5 Re-insert the main battery . For mo re information on inserting the main battery , see “Insert[...]

56 Getting Started Har d Drive Recovery Utilities From time to time, Windows ® will display a pop-up that says, “Windows ® needs your permission to continue.” This is a security feature to prevent programs or people from doing things on your computer without your permission. If you were trying to perform the action, click Continue; otherwise,[...]

57 Getting Started Har d Drive Recovery Utilities The system will prom pt you to insert the appropriate number of b lank CDs or DVDs to copy the Hard Drive Recove ry Utilities. If your optical disc drive is not writable, contact T o shiba Customer Support to obtain the Recover y media for your system. The T oshiba Global Support Centre in the Unite[...]

58 Getting Started Har d Drive Recovery Utilities Hard Disk Drive Recovery options The follo wing are the av ailable hard disk dri ve reco very options: ❖ Hard Disk Dri ve Reco very using the recov ery partition ❖ Recov ering the original factor y image (recommended recov ery method) ❖ Erasing the hard disk ❖ Recov ering the C: partition of[...]

59 Getting Started Har d Drive Recovery Utilities Recovering the original factory image (recommended recovery method) Recovering a hard disk drive to its out of box state deletes all partitions on the hard disk drive and your information will be lost. Be sure to save your work to external media first. 1 On the T oshiba Recovery W izard screen, sele[...]

60 Getting Started Har d Drive Recovery Utilities Erasing the hard disk The Recov ery W izard allo ws you to delete all data and partitions from the hard di sk. T o delete the data and partitions from your hard disk: 1 On the T oshiba Recovery W izard screen, select Erase the hard disk , then click Next . 2 The next screen lists the tw o methods yo[...]

61 Getting Started Har d Drive Recovery Utilities Recovering the C: partition of the HDD without changing the current partition size Recovering the C: drive to its factory default setting reformats your drive and your information on the recovered drive will be lost. Be sure to save your work to external media first. If you have created other partit[...]

62 Getting Started Har d Drive Recovery Utilities The size of the C: drive will disp lay on the progress bar as you make your selections. 4 Click Next to begin the restoration. Once comp lete, a message displays that the HDD has been recov ered. 5 Press any ke y on your keyboard to restart the computer . Hard Disk Drive Recovery using the Recover y[...]

63 Getting Started Using the T oshib a Dual P ointing Device Checking the HDD operating status After restoring your hard disk driv e, you can check its status as follows: 1 Click Start . 2 Right-click Computer . 3 Select Manage . 4 Click Disk Managem ent . 5 Highlight the hard disk dri ve in the V olu me list to display its status in the lower port[...]

64 Getting Started Using the T ouchP ad™ T o mov e the cursor , gently push the pointing device in the direction you want the cursor to move. Pushing harder on the pointing device mov es the cursor faster . Primary button —Performs the same function as the left b utton on a mouse. When a step instructs you to clic k or choose an item, move the [...]

65 Getting Started Using external display de vices Control buttons When a step instructs you to clic k or choose an item, move the cursor to the item, then press an d release the primary (left-hand) button. T o double-click, press the primary button twice in rapid succession. The primary button usually co rresponds to the left mouse button. The fun[...]

66 Getting Started Using external display de vices Directing the display output when you turn on the computer Once you ha ve connected an e xte rnal displ ay devi ce, you can choose to use the internal display only , the external de vice only , or both simultaneously . The quickest w ay to change t he display output settings is to use the d isplay [...]

67 Getting Started Using an external k e yboard Adjusting the quality of the external display T o obtain the best picture quality from you r tele vision (or oth er video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps. TECHNICAL NOTE: T o use one of the simultaneous m[...]

68 Getting Started Connecting a printer If your printer sup ports Plug and Play , your computer may automatically recogni ze the printer; th e printer is then ready for use. Refer to your printer docume ntation for further instruct ions. TECHNICAL NOTE: T o determine if your printer supports Plug and Play , check its documentation. If your printer [...]

69 Getting Started Connecting an optional external disk ette drive Connecting an optional external diskette drive Some operations, such as creati ng a password service disk ette, require a diskette dri ve designed for use with 3.5-inch diskettes. (Sample Illustration) Optional external USB diskette drive T o connect an optional e xternal USB disket[...]

70 Getting Started T urning off the computer Options for turning off the computer Depending on the operating sy stem installed, you have more than one option av ailable for turning off the computer: Shut Do wn, Hibernate, and Sleep. Each option has its advantages. ❖ Use the Shut Down or Hibernate command if you will not be using the computer for [...]

71 Getting Started T urning off the computer ❖ When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using. For information on ho w to use and configure Hibernation mode see “Using and configuring Hibernatio n mode” on page 74 . Sleep mode The Sleep command places the co[...]

72 Getting Started T urning off the computer Using the Shut Down command The Shut do wn command complet ely shuts do wn the computer without saving your work or the cu rrent state of th e computer . This command closes all open program s, shuts down the operating system, and then turns off your computer . Use the following steps to turn of f your c[...]

73 Getting Started T urning off the computer 3 Click Change advanced power settings . The Advanced settings tab of the Po wer Options window appears. (Sample Image) Advanced settings tab of P ower Options scr een 4 Click Power buttons and lid to display the actions that you can configure. 5 Select the options you want from the drop-down lists. ❖ [...]

74 Getting Started T urning off the computer Restarting your computer T o start the computer up again, pr ess th e power b utton unt il the on/ of f light glows g re e n . If you turn off the computer by closing the display panel, you can start it again by open i ng the display panel . Using and configuring Hibernation mode T o turn off the com put[...]

75 Getting Started T urning off the computer 2 Click Change plan s ettings under the po wer plan to be customized. The Edit Plan Settin gs window appears. 3 Click Change advanced power settings . The Advanced settings tab of the Po wer Options window appears. (Sample Image) Advanced settings tab of P ower Options scr een 4 Click Power buttons and l[...]

76 Getting Started T urning off the computer Once the computer is conf igured, you can place it into Hibernation mode by either pressing the po wer button or closing the display panel, depending on the Hibernation options set. Starting again from Hibernation mode T o start up the computer from Hibernation mode, press the power button until the on/o[...]

77 Getting Started T urning off the computer Configuring Sleep mode options Y ou can place the computer into Sleep mode by either pressing the power b utton or closing the display panel. Y ou can also specify an amount of time after which the computer au tomatically g oes into Sleep mode. T o use an y of these methods, you first need to enable them[...]

78 Getting Started T urning off the computer 4 Click Change advanced power settings . The Advanced settings tab of the Po wer Options window appears. (Sample Image) Advanced settings tab of P ower Options scr een 5 Click Power buttons and lid to display the actions that you can configure. 6 Select Sleep for the options you want. ❖ Lid close actio[...]

79 Getting Started Customizing your computer’ s settings Starting again from Sleep mode T o start up the computer from Sleep mode, press the power b utton until the on/off light glows g r ee n . The computer returns t o the screen(s) you were using. If you place the comput er in Sleep mode b y closing the display panel, you can start it again by [...]

80 Getting Started Caring for your computer Do not pick up the computer by its display panel or by the back (where the ports are located). Doing so could damage the system. Using a computer lock Y ou may want to secure your comput er to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For [...]

81 Chapter 2 Learning t he Basics This chapter giv es some computing tips and provides important information about basic features. Computing tips ❖ Sav e your work frequently . Y our work stays in the computer’ s temporary memory until you sav e it to the disk. If the network you are using goes down and you must restart your compu ter to reconn[...]

82 Learning the Basics Computing tips ❖ Back up your files to disks (or other remov able media) on a regular basis. Label the backup co pies clearly and store them in a safe place. It is easy to put of f backing up because it takes time. Ho wev er , if your hard disk suddenly fails, you w ill lose all the data on it unless you have a separate bac[...]

83 Learning the Basics Using the ke yboar d Using the keyboard Y our computer’ s ke yboard contai ns character keys, control ke ys, function ke ys, and special W indo ws ® k ey s , providing all the functionality of a full-size keyboard. (Sample Illustration) Ke yboar d Character keys T y ping with the character keys is very muc h li ke t yp ing[...]

84 Learning the Basics Using the ke yboar d ❖ Press Fn and Enter simultan eously to simulate the Enter key on the numeric pad of the enhanced keyboard. Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys The Ctrl , Fn , and Alt keys do different things depending on the program you are using. For more inform ation, see your program[...]

85 Learning the Basics Using the ke yboar d Overlay keys The ke ys with gray numbers and symbols on the front of them form the numeric and cursor ov erlay . This overlay lets you enter numeric data or control the cursor as you would using the 10-key ke ypad on a desktop comput er’ s k eyboa rd. (Sample Illustration) Numeric and cursor contr ol ov[...]

86 Learning the Basics Starting a pr ogr am Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. T o find the file, use the Start menu or W indo ws ® Explorer . If you prefer to open the program f i rst, you hav e four options. Y ou can: ❖ Double-click th[...]

87 Learning the Basics Starting a pr o gram Starting a program from Windows ® Explorer If a program is not listed in th e All Programs menu, yo u can start it from W indows ® E xplorer . W indo ws ® Explorer gi ves you a vie w of your computer’ s contents as a hi erarchy or “tree. ” Y ou can easily see the contents of each driv e and folde[...]

88 Learning the Basics Saving your work Starting a program using the Start Search field This example uses the Start menu’ s Start Search f ield to start Wo r d P a d : 1 Click Start to display the Start menu. The Start Search f ield appears at the bottom of the Start menu. (Sample Image) Start Sear ch field in Start menu 2 Start typing the progra[...]

89 Learning the Basics Saving your work Saving files 1 In your Windo ws ® -based application, click File , and then Sav e . 2 Click Browse f olders . If you are working with a docum ent that already has a f ile name, this is all you need to do. If y ou created a ne w document, your program displays a Sav e As dialog box. Use this dialog box to spe[...]

90 Learning the Basics Printing your work Using a file extension Most programs assign an extension to the f ile name that identifies the file as being created in the pr ogram with a particular format. F or example, Microsoft ® W ord saves f iles with a .doc extension. Any file name with an extension of “.doc” is assumed to be a Microsoft ® W [...]

91 Learning the Basics Backing up your work 3 Specify the print parameters. For e xample, the range of pages and number of copies to print. 4 Click Print . Backing up your work Back up all the files you create in case something happens to your computer . Y ou can back up your f iles to diff erent types of media such as CDs, D VDs, diskettes, or to [...]

92 Learning the Basics Using the optical drive TECHNICAL NOTE: Y our optical drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourth change, the region will b[...]

93 Learning the Basics Using the optical drive Inserting a compact disc T o insert a compact disc into the dri ve: 1 Make sure the computer is turned on. The dri ve will not open if the computer’ s power is of f. 2 Make sure the dri ve’ s in-use indicator light is off. 3 Press the dri ve’ s eject button. The disc tray slides partially out of [...]

94 Learning the Basics Using the optical drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully , making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you c ould lose data. 8 Make sure the disc is com[...]

95 Learning the Basics Using the optical drive (Sample Image) W indows Media ® Player scr een The W indo ws Media ® Player control panel works much lik e an ordinary compact disc player: ❖ T o play the CD or to pause, click the Play/Pause button. ❖ T o stop the CD, click the Stop button. Before putting on headphones to listen, turn the volume[...]

96 Learning the Basics Using the optical drive If your disc does not run using this m ethod, try using an app lication that is associated with the media on the disc. For example, if it is a music CD, open Windo ws Media ® Player and use it to select and then play the CD. For other type s of media, use the associated software to open the f iles on [...]

97 Learning the Basics T oshiba’ s online r esour ces 2 Pull the tray out until it is fully open , remov e the disc, and place it in its protecti ve co ver . 3 Gently press the tray in to close it. Removing a disc with the computer off T o remov e a disc with the computer turned of f: 1 Insert a slender object, such as a straightene d paper clip,[...]

98 Chapter 3 Mobile Computing This chapter cov ers all aspects of using your comput er while trav eling. T oshiba’ s energy-saver design Y our computer enters a low-po wer suspension mode when it is not being used, thereby conserving energy and sa ving money in the process. It has a number of other features that enhanc e its energy ef ficiency . [...]

99 Mobile Computing Running the computer on battery power Y our computer contai ns T oshiba EasyGuard ™ . The T oshiba EasyGuard * technology is made up of four fou ndational elements that incorporate hardware and software innov ations into various T oshiba notebooks that addres s the most common security , reliability and connect ivity issues fa[...]

100 Mobile Computing Running the computer on battery power T o ensure that the battery maintain s its maximum capacity , operate the computer on battery po wer at least once a month. The Lithium- Ion battery has no memory ef fect so it is not neces sary to let the battery fully discharge each time. Howe ver , for better accuracy of the battery mete[...]

101 Mobile Computing Char ging ba tteries Using additional batteries In addition to the main battery , you may also h av e an optional secondary battery (not included with your computer). If you trav el and need to work for many hours without an A C po wer source, you may purchase a battery modul e for use in the comp uter , or carry additional cha[...]

102 Mobile Computing Char ging batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. T o ensure that the battery char ges to its full capacity , w ait until it reaches room temperature (50 to 80 degrees F ahrenheit, 10 to 26 degrees Celsius). ❖ The battery is almo st com[...]

103 Mobile Computing Monitoring main battery power It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low , the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warnin[...]

104 Mobile Computing Monitoring main battery power HINT : Be careful not to confuse the battery light ( ) with the on/off light ( ). When the on/off light flashes amber , it indicates that the system is suspended (using the Windows ® operating system Sleep command). (Sample Illustration) P ower and batt ery light locations Determining remaining ba[...]

105 Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaini ng charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as [...]

106 Mobile Computing Monitoring main battery power 2 Click Change pl an settings under the power plan to be customized. The Edit Plan Settin gs window appears. 3 Click Change advanced power settings . The Advanced settings tab of the Po wer Options window appears. (Sample Image) Advanced settings tab of P ower Options scr een 4 Click Battery to dis[...]

107 Mobile Computing Monitoring main battery power These power -saving options control the way in which the compu ter is configured. By using them, y ou can increase the length of time you can use the computer before yo u need to recharge the battery . Microsoft ® has combined these options into preset Power Plans . Using one of these power plans [...]

108 Mobile Computing Monitoring main battery power 4 Click Change Pl an Settings to choose the plan you want to edit. This screen allows you to change basic settings. 5 Click Change Adv anced Se ttings to access settings for battery notification lev els, hard drive po wer sav e time, etc. Y ou can click on the plus signs to expand each item and to [...]

109 Mobile Computing Changing the main battery Changing the main batter y When your main bat tery has run out of power , you hav e two options: plug in the A C adaptor or install a char ged main battery . Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive ob[...]

110 Mobile Computing Changing the main battery 5 Slide the battery release lock to the unlo cked position. (Sample Illustration) Unlocking the battery r elease loc k 6 Slide the battery release latch to release the battery . 7 Pull the discharged battery out of the computer . (Sample Illustration) Removing the battery[...]

111 Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately . Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoi[...]

112 Mobile Computing T aking car e of your battery 3 Slide the battery release lo ck to the locked position. (Sample Illustration) Locking the battery r elease lock 4 T urn the computer right side up. 5 Reconnect any cables that were remov ed in step 3 of “Removing the battery from the computer” on page 109 . 6 Restart the computer . T aking ca[...]

113 Mobile Computing T aking car e of your battery ❖ If a battery is leaking or dama ged, replace it immediately . Use protectiv e glov es when handling a damaged battery . ❖ T o replace the main battery , use an identical battery that you can purchase through the T oshiba W eb site at accessories.toshiba.com . ❖ A rev erse polarity conditio [...]

114 Mobile Computing Disposing of used b atteries ❖ If you have extra battery packs, rotate their use. ❖ If you will not be using the system for an extended period, more than one m onth, re mov e the battery pack. ❖ If you are not going to use the computer for more than eight hours, disconnect the A C adaptor . ❖ Store spare battery packs i[...]

115 Mobile Computing T raveling tips T o shiba is dedicated to preservi ng the en vironment by sponsoring Call2Recycle, a program of the Rechargeable Battery Rec ycling Cor pora tio n. For more information and for drop-of f locations, visit www .rbrc.org or call 1-800-822- 8837. Notice regarding CR coin cell batteries, applicable to California, U.S[...]

116 Chapter 4 Exploring Y our Computer’ s Features In this chap ter , you will explore so me of the special features of your notebook computer . Exploring the desktop The desktop is the launching pad for everything you can do in the W indows ® operating system. Y ou use i ts features to start programs, find documents, set up system components, a[...]

117 Exploring Y our Computer’ s Features Exploring the desktop Finding your way around the desktop Y our computer’ s desktop includes se veral standard features: icons, Start button, T askb ar , Notif ication Area, and back ground pattern. (Sample Image) W indows ® oper ating system desktop Icons An icon represents a folder , file, or program [...]

118 Exploring Y our Computer’ s Features Explorin g the desktop If you place the cursor over a n icon, a popup description of the file contents appears. Y our desktop may contain othe r icons depending on your configuration. See W indo ws ® online Help for more specific information on each icon and ho w to use it. Start button Y ou use the Start[...]

119 Exploring Y our Computer’ s Features Setting up for communications Setting up for communications T o connect to the Internet, use an online service, or communicate across the telephone lines with another computer , you need: ❖ A modem (av ailable on certain models) ❖ A telephone line ❖ A browser or communications program ❖ An Internet[...]

120 Exploring Y our Computer’ s Features Setting up for communications 7 Click OK to close the properties dialog box for that sp ecifi c modem. 8 Click OK to close the Phone and Modem Options d ialog box. 9 Close the Control P anel. Connecting the modem to a telephone line Y our computer comes with a built-in modem (av ailable o n certain models)[...]

121 Exploring Y our Computer’ s Features Setting up for communications 2 Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN). Never connect the built-in modem to the digital connector [...]

122 Exploring Y our Computer’ s Features Setting up for communications Setting up the connection T o set up an off ice connection, consult your network administrator for network settings and ad dition al considerations. T o set up a dial-up connection, us e the Connect to the Internet W izard: 1 Click Start , Control Panel , Netw ork and Inte rne[...]

123 Exploring Y our Computer’ s Features An overview of using the Internet Using Wireless LAN connectivity Wireless connectivity and some features may require you to purchase additional software, external hardware or services. Availability of public wire less LAN access points may be limited. Y our system may come with an optional wireless LAN mo[...]

124 Exploring Y our Computer’ s Features An overview of using the Internet The Wo rld Wide Web The W orld W ide W eb (or “W eb”) is a subset of the Internet—a collection of interlinked docum ents (located on computers connected to the Internet) that w ork together using a specific Internet protocol called Hyp ertext T ransfer Protocol (HTTP[...]

125 Exploring Y our Computer’ s Features An overview of using the Internet Surfing the Internet Once connected to the Internet, th e W eb browser displays a home page, for example, your ISP’ s home page on the Internet or your company’ s W eb site home page. T o visit a desired W eb site, type in the W eb ad dress. The W eb address, or Unifor[...]

126 Exploring Y our Computer’ s Features Explor ing audio feat ur es There are sev eral ways to upload or download data. It can be as simple as attaching a f ile or docum ent to an email, or you can use the File T ransfer Protocol (FTP) features of your W eb browser to transfer large amounts of data. Exploring audio features Y ou can use your com[...]

127 Exploring Y our Computer’ s Features Using PC Car ds Using external speakers or headphones Y our computer is equipped with a full stereo sound system with internal speakers. Instead of usin g the internal speakers, you can connect headphones or a pair of external ste reo speakers. Before putting on headphones to listen, turn the volume down. [...]

128 Exploring Y our Computer’ s Features Using PC Car ds Inserting a PC Card Before you insert a P C Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To i n s e r t a P C C a r d : 1 Locate the PC Card slot on the l e f t side of the computer . 2 Insert the PC Card. (Sample Illustra[...]

129 Exploring Y our Computer’ s Features Using an Expr essCar d™ 4 Grasp the edges of the PC Card and slide it out of the slot. (Sample Illustration) Removing a PC Car d Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need t[...]

130 Exploring Y our Computer’ s Features Using an SD™ car d 3 When the card is almost all the way int o the slot, push f irmly but gently to ensure a firm c onnection with the computer . Do not force the card into posit ion. Removing an ExpressCard ™ 1 Prepare the card for remov al by clicking the Sa fely Remove Hardwar e icon in the Notifica[...]

131 Exploring Y our Computer’ s Features Using an SD™ card Do not use the Copy Disk function for this type of media. T o copy data from one media to another , use the drag-and-drop feature of Windows ® . Installing SD card drivers During installation of the SD card driv ers, one or more dialog boxes may appear indicating that the dri v er is n[...]

132 Exploring Y our Computer’ s Features Using an SD™ car d Formatting an SD card T o format an SD card, use the T oshiba SD Memory Card Format utility . Click on Start , All Programs , To s h i b a , Utilities , and then click on SD Memory Card F ormat . MultiMediaCards ™ (MMC ™ s) are not supported by this product. Stopping or removing th[...]

133 Exploring Y our Computer’ s Features Using Slim SelectBay® modules 3 Grasp the card and pull it straight out. (Sample Illustration) r emoving an SD car d The device name disappears only after you hav e physically remov ed the card from your computer . Do not remove memory media while data is being written or read. Even when the Windows messa[...]

134 Exploring Y our Computer’ s Features Using Slim SelectBay® modules HINT : Items from this list that did not come with your computer can be purchased separately . See the accessories information packaged with your system or visit accessories.toshiba.com . Removing a module from the Slim SelectBay ® Use caution when lifting or turning your co[...]

135 Exploring Y our Computer’ s Features Using the i.LINK ® port 3 Slide the Slim Select Bay ® module out of the computer . (Sample Illustration) Removing the Slim SelectBay ® m odule If you are removing the weight saver , retain it for transporting the computer when no other module is installed in th e Slim SelectBay ® . Inserting a module i[...]

136 Exploring Y our Computer’ s Features Using an e xpansion de vice Using an expansion device The expansion port is used to connect your computer to an expansion device. This is an excellent in v estment if you are using your computer both in and out of the office. When you return to your desk, yo u can then connect to your network, print report[...]

137 Chapter 5 T oshiba Utilities Y our computer includes sev eral utilities designed to help you to reconfigure your system to best meet your individual needs. T o gether , these allo w you to ascerta in certain sys tem details, set additional options, or change de fault options. These utilities are described in this chapter . ❖ TOSHIB A Assi st [...]

138 T oshiba Utilities TOSHIB A Assist ❖ TOSHIB A Accessibility ❖ T rusted Platform Module (TPM) ❖ Fingerprint Authentication Utilit y ❖ ConfigFree™ TOSHIBA Assist The TOSHIB A Assist pro vides qui ck access to computer functions and allows you to customize a range of com puter settings. T o access TOSHIB A Assist, do one of the following[...]

139 T oshiba Utilities TOSHIB A Assist Connect The features av ailable in this category are: ❖ ConfigFree™ Connecti vity Doctor ❖ Bluetooth ® Settings ❖ Bluetooth Local COM S ettings (Sample Image) T OSHIBA Assist window – Connect tab[...]

140 T oshiba Utilities TOSHIB A Assist Secure The features av ailable in this category are: ❖ Supervisor password ❖ User password ❖ TOSHIB A Security Assist (Sample Image) T OSHIBA Assist window – Secure tab[...]

141 T oshiba Utilities TOSHIB A Assist Protect & Fix The features av ailable in this category are: ❖ TOSHIB A PC Diagnostic T ool Utility ❖ TOSHIB A HDD Protection Utility (Sample Image) T OSHIBA Assist window – Pr otect & F ix tab[...]

142 T oshiba Utilities TOSHIB A Assist Optimize The features av ailable in this category are: ❖ Mouse Utility ❖ T o shiba Hardw are Setup ❖ TOSHIB A Zooming Utilit y ❖ TOSHIB A Button Su pport ❖ CD/D VD Dri ve Acoustic Silencer ❖ TOSHIB A Accessibility (Sample Image) T OSHIBA Assist window – Optimize tab[...]

143 T oshiba Utilities T oshiba Applicati on Installer T oshiba Application Installer The T osh iba Application Installer allows you to reinstall the driv ers and applications that were original ly bundled with your computer . T o reinstall dri vers and applications: 1 Double-click the T oshiba Application Installer icon on the W indows ® desktop.[...]

144 T oshiba Utilities Setting passwor ds Setting passwords Setting a password lets you walk away from your computer , providing additional protection for your files. When you set a password, you must enter the password before you can wo rk on your computer again. T oshiba supports se ve ral types of passwords on you r computer: ❖ An instant pass[...]

145 T oshiba Utilities Setting passwor ds Using a supervisor password A supervisor password pre vents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, T oshiba strongly recommends that you save your password in a location where you can later access it should [...]

146 T oshiba Utilities Setting passwor ds 6 Click Set . 7 Click OK if you want to save the password to a text file on a diskette or media of your choice, or click Cancel to continue without saving the password to a text f ile. 8 Shut down the system to complete the process. Deleting a supervisor password T o delete a supervisor passw ord: 1 Click S[...]

147 T oshiba Utilities Setting passwor ds T o register a password for the po wer- on password functions: 1 Click Start , All Programs , To s h i b a , Utilit ies , and then TOSHIB A Passw ord Utility . The TOSHIB A P assword Utility windo w appears. (Sample Image) TOSHIB A P asswor d Utility window 2 Click Set . 3 Enter your pas sword, and then ent[...]

148 T oshiba Utilities TOSHIB A Security Assist TOSHIBA Security Assist The TOSHIB A Security Assist Ut ility acts as a “command center” where you can set up v arious passwords or other security features, and see ho w these features can be used with each other to increase security ev en further , or to simplify the ways that you protect your sy[...]

149 T oshiba Utilities TOSHIB A Security Assist ❖ Log on Settings —Select this category to set up security options that protect in di vidual user accounts. ❖ Password of current user : Check the status of the W indows ® password for the account to which you are currently logged on. ❖ Passw ord of all users : Check the status of the W indo [...]

150 T oshiba Utilities TOSHIB A PC Dia gnostic T ool Utility TOSHIBA PC Diagnostic T ool Utility This utility can h elp diagnose problem s with devices in your computer . Refer to the online Help documentatio n within the application for additional help. T o use the TOSHIB A PC Diagnostic T ool utility: 1 Click Start , All Programs , To s h i b a ,[...]

151 T oshiba Utilities TOSHIB A HDD Pr otection Utility TOSHIBA HDD Protection Utility The TOSHIB A HDD Protection utility controls your computer’ s hard disk dri ve (HDD) protection feature, which parks the HDD whene ver motion is detected on the computer . Using this utility , you can enable or disable hard disk driv e (HDD) protection, and set[...]

152 T oshiba Utilities TOSHIB A SD™ Memory Car d F ormat Utility TOSHIBA SD ™ Memor y Card Format Utility This utility is used to format SD ™ cards used with the SD card slot. T o format an SD memory card using this utility: 1 Click Start , All Programs , To s h i b a , Utilit ies , and then SD Memory Card F ormat . The TOSHIB A SD Memory Car[...]

153 T oshiba Utilities TOSHIB A SD™ Memory Boot Utility TOSHIBA SD ™ Memor y Boot Utility The TOSHIB A SD ™ Memory Boot Utility allows you to create an SD card you can use to boot up your computer . This utility also allows you to easily format SD Memory Cards. Refer to the online Help document ation within the application for any additional [...]

154 T oshiba Utilities Mouse Utility Booting from a bootable SD card T o boot from a bootable SD card: 1 Create a bootable SD card (see “T OSHIB A SD™ Memory Boot Utility” on page 153 f or instructions). 2 V erify that no floppy disk is installed in the optional external floppy disk dri ve. 3 Insert a bootable SD car d into the SD card slot. [...]

155 T oshiba Utilities T o s h i b a H a rd w a re S e t u p The settings you can change are di vided into these cate gories: ❖ Buttons ❖ Pointers ❖ Pointer option s ❖ Hardware ❖ Device Settings Y ou may see additional categories depending on your particular pointing device. 2 Adjust the settings as desired, then click OK . T oshiba Hardw[...]

156 T oshiba Utilities T o s h i b a H a rd w a re S e t u p ❖ Display —Allows you to change various default settings for the built-in display When the computer restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in Sleep Mode, press Fn + F5. For more information, see “Directing t[...]

157 T oshiba Utilities TOSHIB A Zooming Utility By changing any of the options that appear in the dialog boxes and clicking App l y , you can reconfigure that function. Any options that you change will become default settings when you restart your system. TOSHIBA Zooming Utility This utility allows you to select which applications will work with th[...]

158 T oshiba Utilities TOSHIB A Button Support The zoom in and zoom out hot keys will now w ork with the applications you selected. T o zoom in, hold down the Fn key and press 2 ; to zoom out, hold down the Fn ke y and press 1 . For more information about how to use the T OSHIBA Zooming utility , right-click the icon in the Notification Area and th[...]

159 T oshiba Utilities CD/D VD Drive Acousti c Silencer CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical driv e to make it run more quietly . Y ou can use this utility to make listening to music CDs more enjoyable. When you change the optical drive to “Quiet” mode, the setting is only valid for the current Windows [...]

160 T oshiba Utilities TOSHIB A Accessibility TOSHIBA Accessibility The TOSHIB A Accessibility utility allows you to use the Fn ke y to create a hot ke y combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the Fn key a sti cky key , meaning you can press it[...]

161 T oshiba Utilities T rusted Platform Module (TPM) T rusted Platform Module (TPM) This section only applies to systems with TPM. Y our T oshiba computer includes the TPM (T rusted Platform Module), which is a security encryption device for your system’ s hard disk dri ve. TPM is already included on your system, but needs to be installed and en[...]

162 T oshiba Utilities F ing erprint Au thentication Utility Fingerprint utility limitations T o shiba does not guarantee that th e f ingerprint ut ility technology will be completely secure or error-free. T oshiba do es not guarantee that the fingerprint u tility will accurately sc reen out unauthorized users at all times. T oshiba is not liable f[...]

163 T oshiba Utilities F ing erprint Au thentication Utility If you do not use a Windows ® password, you will be prompted to define a new (non-empty) one. This is not necessa r y , but a password improves the security of your software. If your system supports power -on security , a Power -on button is also displayed abov e each enrolled fi ngerpri[...]

164 T oshiba Utilities F ing erprint Au thentication Utility The Fast User Switching feature of the W indo ws ® operating sy stem is also supported. If user A is logged on and the fingerprint utilit y verif ies the fingerprint of user B (who is already enrolled), the utility recognizes the fingerprint and switches th e users. If your system suppor[...]

165 T oshiba Utilities F ing erprint Au thentication Utility T o enable power -on security single logon: 1 Open the Contr ol Center and go to Settings - System Settings . 2 Check the Allow power -on security single sign-on check box. (Logon support must be enabled for this option to be accessible.) Fingerprint Management Fingerprints are stored in [...]

166 T oshiba Utilities F ing erprint Au thentication Utility Fingerprints ❖ Enroll or edit current user’ s fingerprint templates—Runs the fingerprint enrollment wizard. Y ou can enroll, edit, or del ete fingerprints for the current user and, if po wer-on security is implemented, control whether they are stored in the fi ngerprint device memor[...]

167 T oshiba Utilities F ing erprint Au thentication Utility Elevate Administrative Privileges for User ❖ Elev ate administrati ve pri vile g es for user .—By def ault, the operating system assumes you are a user and not an administrator, and renders most of the system settings in the Control Center gray and una vai lable. T o access these syst[...]

168 T oshiba Utilities F ing erprint Au thentication Utility Registering a new Web page or dialog Y ou are logged on to the computer and want to register a ne w W eb page. T o create a new re gistration: 1 Display a W eb page you want to register . 2 Fill in the data you want to re play the next time you access this W eb page. 3 Use the reader to d[...]

169 T oshiba Utilities F ing erprint Au thentication Utility ❖ If the page has multiple registered forms, but there is no acti ve form, all existing registered forms for th e page are displayed. Y ou then select the one to be replayed. Replaying a registered dialog Y ou are logged on to the computer and want to replay a registered dialog. T o rep[...]

170 T oshiba Utilities F ing erprint Au thentication Utility 3 Select Registrations . 4 Select a registration. 5 Click Delete . How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory . If the computer changes ownership, T o shiba recommends the f ollowing procedure: 1 Click Start , All Programs , P rotector Sui te [...]

171 T oshiba Utilities F ing erprint Au thentication Utility Observe the follo wing before you swipe your finger on the reader , whether for fingerprint enrollment/registration or recognitio n. ❖ W ash and dry y our hands thoroughly . ❖ Remov e static electricity from your fingers by touching an y metal surface. Static electricity is a common c[...]

172 T oshiba Utilities ConfigF r ee™ Fingerprint reader limitations ❖ The fingerprint reader compar es and analyzes the unique characteristics in a f ingerprint. Howe ver , there may be instances where certain users are unable to register their fingerprints due to insuff iciently u nique characteristics in their fi ngerprints. ❖ A warning mes[...]

173 T oshiba Utilities ConfigF ree™ Getting Started This section contains informat ion about th e ConfigFree main screen, and how to start and set up ConfigFree. For more detailed information on setting up and using ConfigFree, see the Help File included in the appli cation. Starting ConfigFree T o start ConfigFree, be sure the computer has a wir[...]

174 T oshiba Utilities ConfigF r ee™ ❖ Status of W ireless Connection switch (Sample Image) Connect ivity Doctor scr een Profile Settings The Prof ile Settings utility lets you save network settings in “profiles . ” ConfigFree prof iles are useful for easily switching network settings and devices.Y ou can sw itch network settings simply by [...]

175 T oshiba Utilities ConfigF ree™ T o create a profile: 1 Click the icon in the Notif ication Area. 2 Mov e the pointer to Prof ile . 3 Click Open Settings . The ConfigFree Prof ile Settings windo w appears. (Sample Image) ConfigF ree Pr ofile Settings windo w 4 Click Add to start the Create Prof ile W izard.[...]

176 Chapter 6 If Somet hing G oes W r o ng Some problems you may encounter when using your computer are relativ ely easy to identify and solve. Others may require help fro m your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems b y yourself. It cov ers the problems you are most lik[...]

177 If Something Goes Wrong Pr oblems when you turn on the computer 2 Click the A pplications tab . If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End T ask . Closing the failed prog ram should allow you to continue working. If it does not, c[...]

178 If Something Goes Wrong Pr oblems when you turn on the computer If you are using an A C adaptor , v eri fy that the computer is recei ving power from the external po wer source by looking at the A C power light. If the indicator is glo wing, th e computer is conn ected to a liv e external po wer source. The computer starts but when y ou pr ess [...]

179 If Something Goes Wrong Pr oblems when you turn on the computer If you are running on battery power , it is recommended that you do not lea ve the computer in Sleep mode for lo ng periods of time. T o char ge the battery , lea ve the computer plugged into a li ve wall outlet for sev eral hours. For more information see “Charging batteries” [...]

180 If Something Goes Wrong The W indo ws ® operating system is not working 5 V erify that the A C adaptor is th e correct unit for your computer model. The computer may not be abl e to start from an A C adaptor that is rated for less current (amperage) than the computer requires, e ven if the rated v oltage is correct, and the plug fits correctly[...]

181 If Something Goes Wrong The W indows ® operating system is not working ❖ Safe Mode with Command Pr ompt ❖ Enable Boot Logging ❖ Enable low-resolution video (640x480) ❖ Last Kno wn Good Conf iguration (adv anced) ❖ Directory Services Restore Mode ❖ Deb uggin g Mode ❖ Disable automatic restar t on system failure ❖ Disable Driv er[...]

182 If Something Goes Wrong Resolving a hardwar e conflict The Windows ® operating system can help you If the operating system has started properly b ut you still have a problem using your co mputer , the online Help can assist you in troubleshooting the problem . T o access the W indo ws ® operating system Help and Su pport: 1 Click Start , then[...]

183 If Something Goes Wrong Resolving a har dwar e conflict The device most recently connected to the system is th e one most likely to be causing a conflict. Resolving conflicts There are sev eral things you can do to resolve hardw are conflicts: ❖ Get the most recent dri vers from the manuf acturer . ❖ Disable the device. For an ol der de vic[...]

184 If Something Goes Wrong Resolving a hardwar e conflict ❖ The Resources tab, which lists resources assigned to the monitor , optional external optical drive, optional external diskette dri ve, and other power -using functions. This tab does not appear if the device is not using resources. ❖ The Driver tab, which displays th e dri vers being [...]

185 If Something Goes Wrong Resolving a har dwar e conflict Power and the batteries Y our computer recei ve s its po wer through the AC adaptor and power cord/cable or from the system batteries (battery , optional secondary battery , and real-t ime clock (R TC) battery). Power problems are interrelated. For exam ple, a fa ulty A C adaptor or power [...]

186 If Something Goes Wrong Resolving a hardwar e conflict Check the po wer options vi a your Po wer Plans (see “Power Plans” on page 107 ). Have you added a device, such as a PC Card or memory module, that takes its po wer from the battery? Is your software using the hard disk more? Is the display power set to turn of f automa tically? W as th[...]

187 If Something Goes Wrong Resolving a har dwar e conflict Display problems Here are some typical displ ay problems and their solutions: The screen is blank. Display Auto Off may ha ve gone into ef fect. Press any k ey to acti vate the screen. Y ou may ha ve acti v ated the instan t password feature by pressing Fn and F1 simultaneously . If you ha[...]

188 If Something Goes Wrong Resolving a hardwar e conflict The built-in scr een flickers. Some flickering is a normal result of the wa y the screen produces colors. T o reduce the am ount of flickering, try using fewer colors. T o change the number of colors displayed: 1 Right-click in a blank area of the W indo ws ® desktop. 2 Click Personalize ,[...]

189 If Something Goes Wrong Resolving a har dwar e conflict Disk drive problems Problems with the hard disk or with a diskette dri ve usually sho w up as an inability to access the disk or as s ector errors. Sometimes a disk problem may cause one or more files to appear to hav e garbage in them. T ypical disk problems are: Y ou ar e ha ving trouble[...]

190 If Something Goes Wrong Resolving a hardwar e conflict Y our data f iles ar e damaged or corrupted. Refer to your software documentation for file recov ery procedures. Many software packages auto matically create backup files. Y ou may also be able to recover lost data using utility software. Consult your network administrator . Some programs r[...]

191 If Something Goes Wrong Resolving a har dwar e conflict Y ou pr ess the disc eject b utton, but the dri ve tray does not slide out. Make sure the computer is connect ed to a po wer source and turned on. The optical dri ve eject me chanism requires po wer to operate. Make sure a program is not accessi ng the driv e and prev enting it from ejecti[...]

192 If Something Goes Wrong Resolving a hardwar e conflict The computer emits a loud , high-pitched noise. This is feedback between the mi crophone and the speakers. It occurs in any sound system when i nput from a micropho ne is fed to the speakers and the speak er volume is too loud. Adjust the volume control. PC Card problems PC Cards (PCMCIA-co[...]

193 If Something Goes Wrong Resolving a har dwar e conflict 3 Double-click the appropriate PC Card. The operating system displays your PC Card’ s Properties dialog box, which contains informati on about your PC Card configuration and status. The computer stops working (hangs) when y ou insert a PC Card . The problem may be caused by an I/O (input[...]

194 If Something Goes Wrong Resolving a hardwar e conflict Printer problems This sectio n lists some of the most common p rinter probl ems. The printer will not print. Check that the printer is connected to a working po wer outlet, turned on and ready (on line). Check that the printer has plenty of paper . Some printers will not start printing when[...]

195 If Something Goes Wrong Resolving a har dwar e conflict Check the port settings to make sure the hardw are and software are referring to the same COM port. See “Determining the C OM port” on page 119 . Check the communications parameters (bau d rate, parity , data length and stop b its) specified in the communications p rogram. It should be[...]

196 If Something Goes Wrong Resolving a hardwar e conflict ❖ If another computer is on the same network, verify that it has network access, and can connect to the Internet. If, for example, the other computer cannot bro wse to a public W eb site, the ISP’ s (Internet Serv ice Pro vider) service may be disrupted. ❖ V erify that the Service Set[...]

197 If Something Goes Wrong Resolving a har dwar e conflict ❖ Use the PING command to verify a connection to the gate way at 192.168.1.1 (a default gatew ay for most wireless routers). 1 Click Start to open the Start menu. 2 T y pe Cmd in the search field. 3 At the top-left of the Start menu, click cmd.exe . 4 Enter PING 192.168.1.1 at the comman[...]

198 If Something Goes Wrong D VD operating pr oblems The Windo ws ® operating system wireless management facility does not work. If you are using an ext ern al Wi-F i ® adapter (a PC C ard, USB adapter , or other variety), check if the adapter comes with its o wn management utility . If it does, the utility may be disabling the W indows ® operat[...]

199 If Something Goes Wrong Develop good computing habits The screen sa ver runs while y ou ar e watching a movie or title. If the screen sav er is enabled, it runs on top of any movie or title you are watching. T o disable the screen sa ver: 1 Right-click on the desktop and click Personalize in the menu. 2 Select None for the screen sav er . 3 Cli[...]

200 If Something Goes Wrong Develop good computing habits Read the user’ s guides. It is very dif ficult to provide a f ail-safe set of steps you can follow ev ery time you experience a problem with the computer . Y our ability to solve problems will improve as you learn about how the computer and its software work together . Get familiar with al[...]

201 If Something Goes Wrong Develop good computing habits 4 In the input field, enter a name that is descripti ve enough to be easily understood in the future, such as “Before installin g Brand X Accounting app. ” Then click Create . 5 The W indo ws ® operating system creates the Restore Point, automatically stamps it with the current date and[...]

202 If Something Goes Wrong Develop good computing habits Backing up your data or your entire computer with the Windows ® operating system The most v aluable component of y our computer system is the data you create and store on its hard dr ive. Since problems with either hardware or software can mak e the data inaccessible or ev en destroy it, th[...]

203 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a fe w tips to help ensure safe and easy installation of ne w hardware (printers, pointing devices, e xternal hard drives, D VD writers, scanners, etc.) and software (applications like Microsoft ® Of fice and Adobe ® Photoshop ® ,[...]

204 If Something Goes Wrong If you need further assistance 5 Use the new hardw are or software for a while, noting any new problems. Mak e sure that your critical applications (e- mail, business applications, etc.) are w orking correctly , and verify that important de vices are still functioning. 6 For each additional hardware or software item, rep[...]

205 If Something Goes Wrong Other T oshiba Internet W eb sites Contacting T oshiba If you still need help and suspect that the probl em is hardware- related, T oshiba of fers a variety of resources t o help you. T oshiba’ s T echnical Support Web site For technical support, or to stay current on the most recent softw are and hardware options for [...]

206 If Something Goes Wrong T oshiba’ s worldwide off ices T oshiba’ s worldwide offices A ustralia T oshiba (Australia) P ty . Limited 84-92 T alav era Road North Ryde NSW 2113 Sydney Australia Canada T o shiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada France T o shiba Systèmes (France) S.A. 7, Rue Ampère; B. P . 131 92[...]

207 If Something Goes Wrong T oshiba’ s worldwide of fices For more information on additional T osh iba worldwide locations, please visit: www .toshi ba.co.jp/ index. htm . United States T o shiba America Information Systems, Inc. 9740 Irvine Boulev ard Irvine, California 92618 United States The Rest of Europe T oshiba Europe (I .E.) GmbH Hammfel[...]

208 5.375 x 8.375 ver 2.3 Appendix A Hot Keys The TOSHIB A Cards provide a qu ick way to modify selected system functions and to launch applications. There are two types of T OSHIB A Cards: Hot K ey Cards and Application Cards. Hot Key Cards The Hot Ke y Cards are used to modify the following system functions: ❖ Mute ❖ Passw ord security ❖ Po[...]

209 Hot Keys Hot K e y Car ds 5.375 x 8.375 ver 2.3 Using the Hot Key Cards The Hot Ke y Cards are normally hidden from view . The Cards appear only when the pointing device is mo ved to the top center edge of the screen. In addition, a Hot Ke y Card can be displayed b y pressing the associated hot key . Hot keys are keys that, when pressed in comb[...]

210 Hot Keys Application Car ds 5.375 x 8.375 ver 2.3 Application Cards The Application Cards are used to launch these applications: Using the Application Cards T o launch an application using the Applicati on Cards: 1 Mov e the cursor to the top center edge of the screen. The TOSHIB A Cards display at the top of the screen. (Sample Image) T OSHIBA[...]

211 Hot Keys Application Cards 5.375 x 8.375 ver 2.3 Card Case The Card Case feature allows you to choose which cards appear in the Application Card d isplay (see “Using the Applicati on Cards” on page 210 ). T o use the Card Case: 1 Mov e the cursor to the top center edge of the screen. The TOSHIB A Cards appear at the top of the screen. An ic[...]

212 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Hot Key functions Hot ke y functions are performed using eit her the Hot K ey Cards or by pressing the associated hot key . This section lists the av ailable Hot Ke y functions. Hot keys are keys that, when pressed in combina tion with the Fn key , turn system functions on and off. Hot keys hav[...]

213 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Password security The Fn + F1 hot key function acti v ates instant security . The user logon screen will appear and a user with a valid account will need to log back on to gain access to the computer . or Fn + This TOSHIB A Card or hot key locks the computer . Selecting this Card or pressing th[...]

214 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Power plan or Fn + This TOSHIB A Card or hot ke y displays the power plans and cycles through the power plans. The properties of each po wer plan, and the po wer plans that are displayed by this function, are set in the Power Options window . Selecting this Card or pressing the hot key displays[...]

215 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Sleep mode or Fn + This TOSHIB A Card or hot k e y places the computer into Sleep mode. For more information about Sleep mode, please see “Using and configuring Sleep mod e” on page 76 . Selecting this Card or pressing the hot ke y displays the following options: (Sample Imag e) Sleep optio[...]

216 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Hibernation mode or Fn + This TOSHIB A Card or hot k e y places the computer into Hibernatio n mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernatio n mode” on page 74 . Selecting this Card or pr[...]

217 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Display modes or Fn + This TOSHIB A Card or hot ke y cycles through the power - on display options . The displa y modes are: ❖ Built-in display panel only ❖ Built-in display panel an d external monitor simultaneously ❖ External monitor only ❖ Built-in display panel and TV simultaneously[...]

218 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Display brightness This TOSHIB A Card decreases or increases the screen brightness. Fn + This hot key de creases the screen brightness. Fn + This hot k ey increases the s creen brightness. Selecting this Card or pressing either hot key displays the following options: (Sample Image) Display brig[...]

219 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Disabling or enabling wireless devices or Fn + This TOSHIB A Card or hot ke y enables/disables th e optional wireless devices installed in your computer . The wireless modes are: ❖ Wi - F i ® enabled—Enables just the W i-Fi ® module. ❖ Bluetooth ® enabled—Enables just the Bl uetooth [...]

220 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Disabling or enabling the T ouchPad or Fn + This TOSHIB A Card or hot ke y enables/disables th e T o uchPad. For more information on using the T ouchPad, see “Disabling or enabling the T ouchPad™” on page 65 . Selecting this Card or pressing the hot key displays the following options: (Sa[...]

221 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Changing screen resolution or Fn + [ Space bar ] This TOSHIB A Card or hot key switches screen resolution. Selecting this Card or pressing the hot ke y displays the following options: (Sample Image) Scr een r esolution options Cycle through the screen resolutio ns, then select the desired resol[...]

222 Hot Keys Hot K e y functions 5.375 x 8.375 ver 2.3 Keyboard hot key functions Fn + This hot ke y turns the curs or contro l ov erlay on and o f f. Fn + This hot ke y turns the numeric overlay on and of f. Fn + This hot ke y turns the scroll lock featu re on and of f. Fn + This hot ke y tu rns the Z o om in g utility to zoom-out. Fn + This hot k[...]

223 5.375 x 8.375 ver 2.3 Appendix B P o wer Cord/Cable C o nnector s Y our notebook computer features a universal po wer supply you can use worldwide. This appendix show s the shapes of the typical A C po wer cord/cable connectors fo r v arious parts of the world. USA and Canada UL ap prove d CS A ap pr oved United Kingdom BS ap prove d Australia [...]

224 Glossar y TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer . Acronyms The follo wing acronyms may app ear in this user’ s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-R OM compact disc read-only memory CD-R W compact disc rewrite memory CMOS com[...]

Glossary 225 DOS disk operating system DPI dots per inch DSTN dual supertwist nem atic DV D digital versatile (or video) disc DV D - RO M dig ital versatile (or video) disc read-only memory ECP enhanced capabilities po rt EPR OM erasable programmable read-only memory FAT f ile allocation table FCC Federal Communicat ions Commission GB gigabyte HDD [...]

226 Glossary SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB univ ersal serial b us URL uniform resource lo cator WA N wide area netw ork www W orld W ide W eb Te r m s The follo wing terms may appear in this user’ s guide. A active-matrix display — A[...]

Glossary 227 baud rate — The speed at which a comm unication de vice, such as a printer or modem , transmits inform ation. Baud rate is th e number of signal changes per second (not necessarily the sam e as bits per second). See also bits per second . BIOS (basic input/ output system) — Basic instructions, stored in read- only memory (R OM), co[...]

228 Glossary central processing unit (CPU) — The chip that functions as the “brain” of the computer . It takes informa tion from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character — Any letter , number , or symbol you can use on the compu[...]

Glossary 229 device — A component attached to the computer . Devices may be external (outside the computer’ s case) or internal (inside the computer’ s case). Printers, disk dr i ves, and modems are examples of devices. device driv er — A program (called a “dri ve r”) that permits a computer to communicate with a device. dialog box — [...]

230 Glossary double-density d iskette — A 3.5-inch diskette that can hold up to 720 KB of information (half the capac ity of a high-density diskette). See also diskette, high-density diskette. download — (1) In communications, to recei ve a f ile from another computer through a modem or network. (2) T o send font data from the computer to a pri[...]

Glossary 231 f ile extension — The three characters foll o wing the period (pronounced “dot”) at the end of a f ile name. The extension indicates the type of file. Examples are .ex e for program files and .hlp for help fi les. See also file name . fo ld e r — Also called directory . A container for organizing files sa ved to a disk. A folde[...]

232 Glossary hot key — (1) A feature in which cert ain ke ys in combination with the Fn key can s et system options or control system parameters, such as the batter y sav e mode. (2 ) A ke y or combina tion of k eys th at acti vates a memory resident program. hot swapping — The ability to add or remov e devices from a computer while the compute[...]

Glossary 233 local area network — See LAN. logical drive — A section of a disk that is recognized by the operating system as a separate disk dri ve. A system’ s logical dri ves may dif fer from its physical driv es. For example, a single hard disk drive may be partitioned in to two or more logical drives. M memory — T ypically refers to the[...]

234 Glossary non-system disk — A disk for storin g programs and data that cannot be used to start the computer . Compare system disk . O online — A vailable through the computer . Online may refer to information being read from your own computer’ s hard disk, such as online documentation or online Help, or to info rmation coming from another [...]

Glossary 235 port — A socket on the computer where you plug in a cable for connection to a netw ork or a peripheral de vice. processor — See central pr ocessing unit (CPU) . program — A set of instructions t hat can be e xecut ed by a com puter . The general classes of programs (also called software) are operating system, application, an d ut[...]

236 Glossary S select — T o hig hlight or otherwise specify text, data, or graphics with the intent to perform some operation on it. serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentia lly ov er a single channel. On your computer , the seri al port provides a serial interf ace[...]

Glossary 237 W We b — See W orld W ide W eb . Wi- F i ® — A re gistered trademark term of the W i-Fi Alliance that stands for W ireless Fidelity , and is anot her term for the communication protocol to permit an Ethernet connect ion using wireless communication components. W orld Wide W eb (w ww) — The worldwide network of W eb sites linked [...]

238 Index A A C adaptor 43 AC p ow e r connecting adaptor 44 accessories docking solutions 136 memory 48 adding memory 48 Alt keys 84 audio fil e s 126 audio features 126 B backing up files 82 battery changing 109 charge indicator light 45 , 103 charge not lasting 185 charging 43 , 45 conserving po wer 106 disposal 114 low char ge 105 monitoring po[...]

239 Index handling 94 inserting 93 removing 96 , 97 compact disk dri ve using 91 computer caring for 79 cleaning 79 moving 79 non-system disk or disk error message 179 not accessing disk driv es 178 running on battery power 99 setting up 41 , 49 warning resume failure messag e 178 computer lock 80 computing tips 81 connecting to a power source 43 c[...]

240 Index monitor not working 188 mouse 67 external diskette driv e connecting 69 external display , adj usting 67 F F A T (File Allocation T able) 189 file e xtensions 90 file, backing up 82 fil es backing up 91 printing 90 restoring 91 saving 88 fi ngerprint authentication 161 enrollment 162 Fn keys 84 function keys 84 H hard disk driv e secondar[...]

241 Index ov erlay keys 85 troubleshooting 186 using 83 W indo ws® special keys 84 keyboard, e xternal 67 keyboard, full-size 83 L lock computer , using 80 M main battery removing 109 memory adding 48 problem solving 184 removing expansion slot cov er 50 memory module inserting 51 installation 49 removing 55 microphone 126 modem connecting to tele[...]

242 Index problem solving 185 turning on 47 power b utton 48 , 57 po wer plan hot key 108 power plans 107 power source 43 connecting 44 powering do wn using Hibernation 74 using Shut Dow n 72 using Sleep 76 precautions 39 primary button 64 , 65 printer connecting 67 problem solving 194 printing a file 90 problem solving AC p o w e r 185 accessing d[...]

243 Index running the compu ter on battery power 99 S safety computer 115 disposing of batteries 114 icons 36 precautions 39 saving f iles 88 screen blank 187 does not look norm al/flickers 187 SD card formatting 13 2 installing drivers 131 using 130 using in Hibernation mode 132 using in Sleep mo de 132 secondary button 64 , 65 set up communicatio[...]

244 Index V video projector adjusting display 67 W war ran ty limited warranty 37 We b 124 We b s i t e s 205 Wi - F i ® wireless netw orking 123 W indo ws Media® Player 94 W indo ws Media® Player icon 117 W indo ws® Explorer 87 W indows® operating system Help and Support 182 problem solving 180 W indo ws® operating syst em desktop 116 W indo[...]