Toshiba PROT130D manuel d'utilisation

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) 1 Toshiba Personal Computer Satellite T130D/Satellite ProT130D/PORTEGE T130D Maintenance Manual TOSHIBA CORPORATION File Number 960-Q08[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Copyright © 2009 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained here[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Series. The procedures described in this manual are intended to help service technicians isolate[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite T130D, Satellite Pro T130D, and PORTEGE T130D system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Te[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example:[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram ...............................................................[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Chapter 2 Troubleshooting Procedures 2.1 Troubleshooting ........................................................................................................... .1 2.2 Troubleshooting Flowchart ..........................................................................[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) 2.8 Display Troubleshooting..............................................................................................23 Procedure 1 External Monitor Check...........................................................23 Procedure 2 Diagnostic Test Program Execution Check [...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) 2.17 Microphone Troubleshooting ..................................................................................... 39 Procedure 1 Sound Recorder Execution Check .......................................... 39 Procedure 2 Connect Check and Replacement Check……………[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Chapter 3 Diagnostic Programs 3.1 Tests and Diagnostics Software Overview ....................................................................2 3.2 Executing the Diagnostic Test .......................................................................................3 3.3 S[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Chapter 4 Replacement Procedures 4.1 Overview ................................................................................................................... .... 1 Safety Precautions ....................................................................................[...]

Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Appendices Appendix A Handling the LCD Module ................................................................................1 Appendix B Board Layout .....................................................................................................1 Appendix C Pin As[...]

Chapter 1 Hardware Overview Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) Chapter 1 Hardware Overview[...]

Chapter 1 Hardware Overview Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) 1 Hardware Overview Chapter 1 Contents 1.1 Features ................................................................................................................... ...... 1 1.2 System Block Diagram ...................................[...]

Chapter 1 Hardware Overview Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) Figures Figure 1-1-1 Left of the computer .......................................................................................... 4 Figure 1-1-2 Right of the computer ...................................................................[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Features 1.1 Features The Satellite T130D, Satellite T130D, PORTEGE T130D ( AMD Platform) features are listed below.  Microprocessor Microprocessor that is used will be d ifferent by the model. It supports processors as follows -1.6GHz (18W[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08)  Keyboard Keyboard module has 85 or 86 keys. It s upports Windows key and Application key.  Battery The RTC battery is equipped inside the computer. The main battery is a detachable lithium ion battery. -6 cell 10.8V -12cell 10.8V  US[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08)  Bridge Media Slot SD/SDHC/MS/MS pro/xD/MMC are supported.   Bluetooth Some computers in this series of fer Bluetooth wireless communication functiona lity. This module is Version 2.1+EDR.  Wireless WAN Some models are equipped wit[...]

Chapter 1 Hardware Overview 11 10 9 5 6 14 12 7 8 13 1 3 4 2 1. External Monitor port 12.Power Button 2. HDMI out port 13. Security Lock 3. USB port (USB Sleep and Charge function is supp orted by this port only.) 4. FAN HOLE 14.Hall-s ensor 5. Keyboard 6. Touch Pad 7. Touch Pad Control Right Button 8. Touch Pad Control Light Button 9. Display Scre[...]

Chapter 1 Hardware Overview 7 8 1 2 3 6 4 5 1. LAN jack 8. DC-IN jack 2. USB port 3. USB port 4. Microphone jack 5. Headphone Jack 6. Bridge Media Slot 7. Wireless LAN/Wirele ss WAN Antennas Figure 1-1-2 right of the computer Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08)[...]

Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2-1 shows the system block diagram. Figure 1-1-1 System block diagram for AMD Platform Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08)[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) The PC contains the following components.  CPU -1.6GHz (18W), Turion X2 Neo Dual-Core Processor L625 -1.5GHz (18W), Athlon X2 Neo Dual-Core Processor L325 -1.6GHz (15W), Athlon Neo MV-40  Memory Two memory slots capable of accepting DDR2[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08)  AMD RAID Support  AHCI Support  IDE Controller  RTC (Real Time Clock)  Power Management  Integrated Micro-Controller (IMC)*  High Definition Audio Controller  21mm x 21mm,0.8mm Pitc h 528-FCBGA Package  Other main s[...]

Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3-1 shows a view of the 2.5-inch HDD and Tables 1-3-2 and 1-3-3 list the specifications. Figure 1-3-1 2.5-inch HDD Standard value Parameter Toshiba MK2555GSX Toshiba MK3255GSX T[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Weight (g) 95 (max.) 95 (max.) 102 (max.) 102 (max.) Standard value Parameter WD WD2500BEVT- 26ZCT0 WD WD3200BEVT-26Z CT 0 Width (mm) 100 Height (mm) 12.5 Depth (mm) 70.0 Outline dimensions Weight (g) 101(Max) Table 1-3-2 2.5-inch HDD dimensio[...]

Chapter 1 Hardware Overview Specification Parameter WD WD2500BEVT-26Z CT 0 WD WD3200BEVT-26Z CT 0 Storage size (format ted) 250GB 320GB Speed (RPM) 5,400 Data transfer Rate - To/From Media - T0/From Hos t 117MB/s Ma x. 3Gbps bus transfer rate (MB/s) 3Gbps Average random seek time (read) (m s) 12.0ms/14.0ms Power-on-to-r eady (sec) 4.0 (typ) Specifi[...]

Chapter 1 Hardware Overview 1.4 Keyboard The Flatiron 10 A keyboard has two different kinds of placement, one is for US style and the other is for UK style. Figure 1-4-1 is a view of the keyboard for US style Figure 1-4-1 Keyboard for US style Figure 1-4-2 is a view of the keyboard for UK style Figure 1-4-2 Keyboard for UK style See Appendix E for [...]

Chapter 1 Hardware Overview 1.5 TFT Color Display The Satellite T130D, Satellite T130D, PORT EGE T130D use LED to control backlight. 1.5.1 LCD Function Block Figure 1-5-1 shows a view of the LCD F unction Block and Table 1-5-2 lists the specifications. Figure 1-5-1 AUO LCD Function Block Diagram Specifications(WXGA+) Item AUO B133XW02 V0(H/W:0A) LG[...]

Chapter 1 Hardware Overview 1.5.2 LCD Module Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08)[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.6 Power Rails Table 1-6-1 lists the power rail outpu t specifications of Congo platform . Power supply （ Yes/No ） Name Voltage [V] Power OFF Suspend mode Power OFF Boot mode No Main Battery(w ith RTC battery) +5VPCU 5 Yes Yes No +5V 5 No[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.7 Batteries The PC has the following two batteries.  Main battery  Real time clock (RTC) battery Table 1-7-1 lists the specification s f or these two batteries. Battery Name Battery Element Output Voltage 6 Cell Li-ion 10.8v Main Batte[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Power ON Power OFF 6 cell 5 ~ 10 hours about 5 hours 12 cell 5 ~ 10 hours about 4 hours Table 1-7-2 Time required fo r charges of main battery Charge is stopped in the following cases. 1. The main battery is fully charged 2. The main battery i[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.7.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory. Table 1-7-4 lists the Time required for charge s of RTC battery and data retaining tim e. Condition Time Charging t[...]

Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.8 AC Adapter The AC adapter is used to charge the battery. Table 1-8-1 lists the AC adapter specifications. Parameter Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON Power 65W 65W Input voltage AC 100V/240V Input frequency 50Hz/60Hz Inp[...]

Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Chapter 2 Troubleshooting Procedures[...]

Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Chapter 2 Contents Chapter 2 Contents 2.1 Troubleshooting ........................................................................................................... .1 2.2 Troubleshooting Flowchart .............................[...]

Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 2.8 Display Troubleshooting ............................................................................................. 23 Procedure 1 External Monitor Check .......................................................... 23 Proced[...]

Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 2.17 Microphone Troubleshooting...................................................................................... 39 Procedure 1 Sound Recorder Execution Check .......................................... 39 Procedure 2 Connec[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1. Power supply 7. LAN 13 . 3G 2. Sy[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-2-1 as a guide for determining which troubleshooting procedures to execute. Before going through th e flowchart steps, verify the following:  Ask[...]

Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (1/2) Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) [...]

Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (2/2) If the diagnostics program cannot detect an e rror, the problem may be intermittent. The Test program should be executed several tim es to is olate the problem. Check the Log Utilities function to confirm which diagnostic test de tected an error(s), and then perform t[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  4. If an error is found on th e touch pad test, perform the Touch pad Troubleshooting Procedures in Section 2.7. 5. If an error is detected on the display test, perfor m the Display Troubleshooting Procedures[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the ot[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  DC IN icon Power supply status Lights blue DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunctio n *1 Doesn’t light Any condition other than those above. Table 2-3-2 DC IN i[...]

Chapter 2 Troubleshooting Procedures Procedure 2 Connection Check The wiring diagram related to th e power supply is shown below: CN19 Congo MB SYSTEM BOARD HDD Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord is firmly plugged into the DC IN connector PCN1 (Congo) and wall outlet. I[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  Check 3 The battery pack may be completely discharged. Wait a few m inutes to charge the battery pack while connecting the battery p ack and the AC adapte r. If the battery pack is still not charged, go to Ch[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  Procedure 4 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks. To disassemble the computer, [...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed. The proced[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  Procedure 1 Message Check When the power is turned on, the system perfor ms the Power on Self Test (POST) installed in the BIOS ROM. The POST tests each IC on the system board and initializes it.  If an er[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  Procedure 2 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board. Refer to Chapter 3, Tests and Diagnostic, for more informatio[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2.5 SATA Hard Disk Drive Troubleshooting To check if 2.5” HDD is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Partition Check Procedure 2: Message Check Pro[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. When the test detects an error, an error message is displayed on the [...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  Procedure 3 Format Check The computer’s HDD is formatted using the Free-DOS FORMAT program or the physical format program of the test program. To fo rmat the HDD, start with Check 1 below and perform the ot[...]

Chapter 2 Troubleshooting Procedures Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about the HDD test program. If an error is detected during the HDD test, an error [...]

Chapter 2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check HDD(s) is/are connected to the connector(s) on the system board. Th e connection of HDD(s) and board may be defective. Otherwise, they may be faulty. Disassemble the com puter following instructions in Chapter 4, Replacement Procedures and perform the following c[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2.6 Keyboard Troubleshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Pr[...]

Chapter 2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure keyboard cable is firmly connected to s[...]

Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8)  2.7 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check [...]

Chapter 2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the cable is fi rmly connected to syste[...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) 2.8 Display Troubleshooting To check if the computer’s display is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External Monitor Check Procedure 2: Diagnostic Te st Program Execution C[...]

Chapter 2 Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD. Their cables may be disconnected from system board. Disassemble the com puter following the steps described in Chapter 4, Replacement Procedures . If the connection is loose, reconnect firmly and restart the co mputer. If th[...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 4 Replacement Check LCD module, LCD cable are connected to displa y circuits. Any of these com ponents may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then per[...]

Chapter 2 Troubleshooting Procedures 2.9 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute LAN t[...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) 2.10 Wireless LAN Troubleshooting To check if the computer's W ireless LAN is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Transmitting-Receiving Check Procedure 2: Antennas' C[...]

Chapter 2 Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: CN23 SYSTEM B O ARD Congo MB W LA N C ARD WLAN ATTENNA (BLACK) AUX MAIN (WHITE) WLAN ATTENNA MINI-PCI Any of the connections may be defective. Disassemble the computer following the steps described in Chapter 4,[...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disa ssemble the computer and then perform the following checks:[...]

Chapter 2 Troubleshooting Procedures 2.11 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check Procedure 2: Replacement Check Procedure 1 Connector Check The connection of sound system is shown in the following figure. As the connection[...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 2 Replacement Check  If External microphone/Headphone does not work properly, perform check 1.  If internal microphone /Speaker do no t work properly, perform check 2.  If HP out does not work properly, perform check [...]

Chapter 2 Troubleshooting Procedures 2.12 Bluetooth Troubleshooting To check if the computer’s B lue tooth is malfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Connector Check and Replacement Check The B lue tooth module is connected to system board. If [...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08)[...]

Chapter 2 Troubleshooting Procedures 2.13 HDMI Troubleshooting To check if the computer’s HDMI is malf unctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External HDMI Monitor Check Procedure 2: Connector and Cable Check Procedure 3: Replacement Check Procedure 1 Connector Check and Replacement Check The HD[...]

Chapter 2 Troubleshooting Procedures Procedure 3 Connector and Cable Check HDMI monitor connected to HDMI&USB board by an HDMI cable. If the connection is loose, reconnect firmly and restart the co mputer. If the problem still occurs, go to Procedure 4. Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08)[...]

Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 4 Replacement Check HDMI signals are connected to display circ uits via HDMI cable and HDMI&USB board. Any of these components may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemb[...]

Chapter 2 Troubleshooting Procedures 2.14 Memory Troubleshooting Memory troubleshooting can following be low procedures as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connect Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Memory test in the Memory test p rogra m. Refer to C[...]

Chapter 2 Troubleshooting Procedures 2.15 3G Troubleshooting To check if the computer’s 3G is malfuncti oning or not, follow the troubleshooting procedure below as instructed. Procedure 1 Connector Check and Replacement Check The 3G module is connected to system board. If 3G malfunctions, its connection is defective or Antenna and system board ma[...]

Chapter 2 Troubleshooting Procedures 2.16 Camera Troubleshooting To check if the computer’s Camera is m a lfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Camera Execution Check Procedure 2: Connect Check and Replacement Check Procedure 1 Camera Execution Check Open photo/video tool to look if there is a[...]

Chapter 2 Troubleshooting Procedures 2.17 Microphone Troubleshooting Microphone troubleshooting can following below procedures as instructed. Procedure 1: Sound Recorder Execution Check Procedure 2: Connect Check and Replacement Check Procedure 1 Sound Recorder Execution Check Open accessory to find sound recorder tool, try to record a length of so[...]

Chapter 2 Troubleshooting Procedures 2.18 CRT Troubleshooting To check if the computer’s CRT is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External Monitor Check Procedure 2: Connector and Cable Check Procedure 3: Replacement Check Procedure 1 External Monitor Check Connect an external monitor t[...]

Chapter 2 Troubleshooting Procedures 2.19 USB Board Troubleshooting Flatiron carries 3 USB port. To check if the computer’s USB port is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connect Check and Replacement Check Procedure 1 Diagnostic Test[...]

Chapter 2 Troubleshooting Procedures 2.20 LED Troubleshooting These are 7 LED lights at Top assy. From left to right, the Open statuses of them represent functions as below. 1. AC-IN 2. Power 3. Battery 4.HDD 5. Cardreader 6.W-Lan 7.LED To check if the computer’s LED is malfunctioning or not, follow the troubleshooting procedures below as instruc[...]

Chapter 3 T est Program for Field _____________________________________________________________________ Satellite T130D, Satellite Pro T130D and PORTEG E T130D Main tenance Manual (960-Q0 8) Chapter 3 Diagnostic Programs[...]

Chapter 3 T est Program for Field _____________________________________________________________________ Satellite T130D, Satellite Pro T130D and PORTEG E T130D Main tenance Manual (960-Q0 8) Chapter 3 Contents 3.1 Tests and Diagnostics Software Overview ............................................................... 2 3.2 Executing the Diagnostic T[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Chapter 3 Diagnostic Programs[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite T130D, Satellite Pro T130D and PORTEGE T130D computer systems. NOTES : Before starting the Tests and Di[...]

Chapter 3 Test Program for Field. 3.2 Executing the Diagnostic Test Free-DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a Free-DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk. 2. Insert the boot disk into the computer’s floppy disk drive and turn on [...]

Chapter 3 Test Program for Field. The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite(Pro) P500 Diagnostics Version V1.00 [DIAGNOSTICS MENU] 01. DIAGNOSTIC TEST 02. RUNNING TEST 03. DMI INFORMATION 04. LOG UTILITIES 05. SYSTEM CONFIGURATION ::Select item ESC :Escape 06. OPTION 99. EXIT [DIAGNOSTIC TEST MENU] 0[...]

Chapter 3 Test Program for Field. 4. Select the subtest you want to execute and press Enter . The following menu displays: Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 5. Select the desired test from the subtest menu and press Enter . The following Test Parameter menu displays: [ DIAGNOSTICS MENU ] 01. DIAG STI[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) NOTES : The Item2 and 3 of Test Parameter are not used by some tests. Go To Test Move the highlight bar to Go to Test and press Enter to start executing the test. Test Loop Select NO to return the screen to the subtest menu after the[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.3 Subtest names Table 3-3-1 lists the subtest names for each test program in the Diagnostic Test m enu. No. Test Name No. Subtest Name 01 SYSTEM TEST 01 02 03 04 FAN ON/OFF check Battery TEST CPU Temperature 3D HDD Protection Test [...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) No. Test Name No. Subtest Name 05 FLOPPY DISK TEST 01 02 03 04 05 Sequential Read Sequential W/R/C Random Address/Data Write Specified Address Read Specified Address 06 HARD DISK TEST 01 02 03 04 05 06 07 08 Sequential Read Address U[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) No. Test Name No. Subtest Name 10 MULTIMEDIA TEST 01 02 03 04 Sequential Read Test Random Read Test Read Specified Address Test 1 point W/R/C Test 11 MEMORY2 01 02 03 04 All one/zero Test Walking 1/Walking 0 Test(Left) Walking 1/Walk[...]

Chapter 3 Test Program for Field. 3.4 System Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains three subtests. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 FAN ON/OFF Checking Select 1,2,3 to control FAN on/[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 03 CPU Temperature This will display CPU Temperature for check, press [ESC] to exit . [CPU_TEMP.EXE] Program Version: 1.3 03-09-2009 CPU Temperature: XX GPU Temperature: XX NOTES : If no external Graphics, GPU not report temp[...]

Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program The portion which PC and Test-Fixture contact is green. Set method of PC 3 Test1 Judgment If all data is less than ranges, it will be OK. X Z Upper Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manu[...]

Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 4 Test2 Judgment If all data is less than ranges, it will be OK. U pp e r Rear Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 5 Test3 Judgment If all data is less than ranges, it will be OK. U pp e r Right[...]

Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 6 Test4 Judgment If all data is less than ranges, it will be OK. U pp e r Front[...]

Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 7 Test5 Judgment If all data is less than ranges, it will be OK. 8 Inspection Judgment If all data is less than ranges, it will be OK. 9 Setting Calibration data When an inspection result is O.K., cali[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Memory Test contains five subtests that test the computer’s mem ory. Move the highlight ba[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data. Test data = 0000H, 0004H, 0008H, 000CH,...8000H, 8004H, through FFECH Subtest 02 Prot[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) with the original data patterns. Addresses are displayed in 64KB increments during the test. Test Process: 1. Byte Enable Test One bit write/ 8 bit read” is executed and the new data is compared with the original data. Test data = [...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Test Process: 1. Checks the memory size to determ ine the maximum size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed. 3. Writes, reads, and compares test data after a m emory refresh cycle (16ms or more)[...]

Chapter 3 Test Program for Field. 3.6 Keyboard Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains five subtests that test the computer’s keyboard and mouse actions. Move the highlight bar to the subtest you want to execute and press Enter . NOT[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 04 Hot Key Display [9 Key] This subtest is used for the 9 hot key and functions the same as Subtest 1. ECO MUTE MUSIC PLAY BACK NEXT VOL- VOL+ WLAN Subtest 05 Hot Key Display [1 Key] This subtest is used for the 1 hot key and[...]

Chapter 3 Test Program for Field. LEFT PRESS RIGHT PRESS TOUCH_PAD TEST Please Do Not Press the Left and Right Button at the Same Time Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 3 Test Program for Field. 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 0[...]

Chapter 3 Test Program for Field. Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES were selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25). The screen below displays when this subtest is executed. CH[...]

Chapter 3 Test Program for Field. Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25). The data displayed is shifted 1 byte to the left for each line as shown below. 80*25 CHARACTER DISPLAY 01234567890123456789012345678901234567890123456789012345678901234567890123[...]

Chapter 3 Test Program for Field. Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white. The screen below shows the displays when this subtest is executed. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 320 * 200 GRA[...]

Chapter 3 Test Program for Field. 320*200 GRAPHICS DISPLAY : [D] BLACK D GRAY BLUE L BLUE GREEN L GREEN CYAN L CYAN RED L RED MAGENTA L MAGENTA BROWN YELLOW WHITE I WHITE Press [Enter] KEY Press ENTER to display 64 gradations of red, green, blue and white on the screen 320*200 GRAPHICS DISPLAY : [13] Satellite T130D,Satellite Pro T130D and PORTEGE [...]

Chapter 3 Test Program for Field. Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolutions to display three windows; each window drives a different set of dots: even dots, odd dots and all dots. The screen below displays when this subtest is executed. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual[...]

Chapter 3 Test Program for Field. Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolutions to display 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays when this subtest is execu[...]

Chapter 3 Test Program for Field. 640*480 GRAPHICS DISPLAY : [12] BLACK DARK GRAY BLUE LIGHT BLUE GREEN LIGHT GREEN CYAN LIGHT CYAN RED LIGHT RED MAGENTA LIGHT MAGENTA BROWN YELLOW WHITE INTENSIFIED WHITE Press [Enter] KEY To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Me[...]

Chapter 3 Test Program for Field. Subtest 07 Display Page This subtest displays video pages zero through seven. DISPLAY PAGE 0 000000000000000000000000000000000000000000000000000000000000000 0............................................................0 0............................................................0 0................................[...]

Chapter 3 Test Program for Field. Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HH[...]

Chapter 3 Test Program for Field. Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. 640 * 480 GRAPHICS DISPLAY CYAN WHITE YELLOW To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + brea[...]

Chapter 3 Test Program for Field. Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays when this subtest is executed. 640*480 COLOR ATTRIBUTE DISPLAY[...]

Chapter 3 Test Program for Field. NOTE: The following screen does not display correctly. It will be amended in the next version. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Press [Enter] Key Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12. Press [[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Press [Enter] Key To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES were selected for Test Loop on the Test Parameter Menu.[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display. Black Red Green Blue Gray Red Gradation Green Gradation Blue Gradation White Red Gradation [...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.8 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Hard Disk Test contains eight subtests that test the functions of the hard disk drive.[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, and then reads the data while moving from cylinder to cylinder. Data Pattern B5ADADH 4A52[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data. TEST DATA????(=37b3H) Subtest 08 W -R-C Specified Addresses This subtest[...]

Chapter 3 Test Program for Field. 3.9 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions. Move the highlight bar to the subtest you want to execute and pr[...]

Chapter 3 Test Program for Field. Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data. Subtest 03 Real Time Carry CAUTION : When this subtest is executed, the current date and time are reset. This subtest checks the clock?[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.10 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Cach e Memory Test contains eight subtests that test the computer's cache [...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM. The subtest then writes the bit shift data patterns (1 bit shifted every 4 bytes ), reads the new data and compares the result w[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.11 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The High Resolution Display Test contains six subtests that t[...]

Chapter 3 Test Program for Field. Subtest 02 640*480 Mode Display This subtest uses 640*480 video resolutions to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) [ 640*480 256 ] Pre[...]

Chapter 3 Test Program for Field. Subtest 03 800 * 600 Mode Display This subtest uses 800*600 video resolutions to display a high resolution white frame, 256 letter types (8*16 pixels) and 256 gradations of white, red, green, and blue as shown below. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) [ 800*600 256 ] [...]

Chapter 3 Test Program for Field. Subtest 04 1024* 768 Mode Display This subtest uses 1024*768 video resolutions to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) [ 1024*768 256 ][...]

Chapter 3 Test Program for Field. Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH[...]

Chapter 3 Test Program for Field. Subtest 06 Focus Test (“E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame. To exit this subtest and return to the High Resolution Display Test menu: Press Enter if NO was selected for Test Loop on [...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.12 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Multimedia Test contains four subtests that test the computer's m ultimedia fu[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.13 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and Follow the directions on the screen. The MEMORY2 Test contains four subtests that test the computer's. Move the highlight b[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Tee test method is the same as Subtest2. However, the data to be used differs. 7FFF7FFF7FFF7FFF8000800080008000 BFFFBFFFBFFFBFFF4000400040004000 DFFFDFFFDFFFDFFF2000200020002000 FFFBFFFBFFFBFFFB0004000400040004 FFFDFFFDFFFDFFFD000200[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.14 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests. Device Name Error Code Error Status Name (Common) FF Data Compare Error Memory 02 Protected Mode Not C[...]

Chapter 3 Test Program for Field. Table 3-15-1 Error codes and error status names (2/2) Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense Error ?? Other Error Cache Memory 02 Protect Mode Error 03 Caching Error ?? Other Error Multimedia 01 Write Error 0F Invalid Drive 15 Drive Not Ready ?? Ot[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.15 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD. If a work disk is not inserted an error will be generated dur[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.16 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.16.1 Check DMI Information The Check DMI Configuration program contains the following configuration information for t[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) c. AC Adapter Select [1]65W [2]75W [3]95W [4]120W Select 1 ~ c to key in new data , select 0 to exit program , program will com pare input data length with the max length , if over will retry key in Note: Please Check New DMI Informa[...]

Chapter 3 Test Program for Field. 3.17 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log: 500 tim es). This function can store data on a floppy disk. If the power switch is turned off, the erro r inform ation will be lost. Error information is displayed in the f[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostics [...]

Chapter 3 Test Program for Field. 3.18 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION: * - BIOS VER = VX.XX KBC VER = XXXX * - MAC ADDRESS: XXXXXXXXXXXX * - 0 ASYNC ADAPTER * - 1 HDD DRIVE(S):XXXXXXXXXXXXXXXXXXXXXXXXXX FW Rev.:XXXXXXXX CUR LBA:XXXXXXXX ORG[...]

Chapter 3 Test Program for Field. 3.19 Running Test Edit Item 3.19.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test. The following screen displays after pressing the Tab key to edit an item in the Running Test. KEY OPERATION  Cursor Down  Cursor Up PgDn Page Down PgUp Page Up Hom[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 1. Enter a number or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes. Select 0 to run the test continuously until halted by the user. 2. Select the NO or YES[...]

Chapter 3 Test Program for Field. 3.20 Common Tests and Operation 3.20.1 How to operate a window To input parameters, or open a window use the following keys. key : to move a highlight bar [Enter] key : to select an item at the highlight bar [Esc] key : to close the current window and go back to the previous window 3.20.2 How to Stop the Test Progr[...]

Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Pass Count Displays the number of times the test has been executed. Error Count Displays the number of errors which have occurred during the test. Write Data Displays only the test data that has failed to compare during the test whil[...]

Chapter 3 Test Program for Field. 3.20.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays: [HALT OPERATION] 1. Test end 2. Continue 3. Retry * Select 1, 2, or 3 The three selections have the following functions: 1: Terminates the test program and exits to the subtest menu. 2: C[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Chapter 4 Replacement Procedures[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Chapter 4 Contents 4.1 Overview ................................................................................................................... .... 1 Safety Precautions .......................................................[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Figures Figure 4-2-1 Remove the battery pack................................................................................. 9 Figure 4-2-2 Install the battery pack ...............................................................[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Figure 4-10-3 Remove the touchpad and touchpad board…………………………………41 Figure 4-11-1 Remove the I/O Board .................................................................................. 43 Figure 4-12-1 [...]

Chapter 4 Replacement Procedures 4 2 4.1 Overview This chapter describes the procedure for rem oving and replacing the field replaceable units (FRUs) in the PC. It may not be necessary to remove all the F RUs in order to replace one. The chart below provides a guide as to whic h other FRUs must be removed before a particular FRU can be removed. The[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer. DANGER: 1. In the case of the battery, always use authentic parts[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section ?[...]

Chapter 4 Replacement Procedures Disassembly Procedure Three main types of cable connector are used.  Pressure plate connector  Spring connector  Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull the cab le out from the connect or. W hen r[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled. Take note of the following general points when assembling the compute[...]

Chapter 4 Replacement Procedures Screw Tightening Torque Use the following torque when tightening screws. CAUTION : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall ou t) causing a short circuit or other damage. NOTE : To tighten screws quickly and accu rately, an electric screwdriver is recom[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths are i ndicated on the computer body. Format: Screw shape + Screw length (mm) Screw shape B: Bind screw [...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) 4.2 Battery pack Removing the battery pack The following describes the procedure for rem o ving the battery pack (See Figure 4-2-1). CAUTION: Take care not to short circuit the te rminals when removing the battery pack. Similarly, [...]

Chapter 4 Replacement Procedures LATCH 2 LATCH 1 Figure 4-2-1 Remove the battery pack NOTE : Dispose of the used battery pack in a ccordance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-2-2). CAUTION: There is a danger that the [...]

Chapter 4 Replacement Procedures 3. Attach the battery cover to the battery pack . 4. Insert the battery pack 5. Ensure the battery releas e latch (2) is moved into its locked position LATCH 2 Figure 4-2-2 Install the battery pack Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 4 Replacement Procedures 4.3 HDD Removing a HDD-H9.5mm The following describes the procedure for re moving the HDD (See Figure 4-3-1 to 4-3-3). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device. 1. Turn the computer upside down. 2. Remove the following screws with a T6 –bit[...]

Chapter 4 Replacement Procedures Figure 4-3-1 Turn the computer upside down CAUTION: When a HDD is installed, they are inst alled in the position as the following figure. Figure 4-3-2 Remove HDD assembly Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 4 Replacement Procedures 5. Remove the following screws securing the HDD holder and remove the HDD holder .  M3.0  3.0B FLAT BIND screw x4 M3*3 4pcs Figure 4-3-3 Remove HDD Installing HDD-H9.5mm The following describes the procedure for installing the main HDD. 1. Install a HDD to the HDD holder and secure it with the fo llo wing scre[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) 4.4 Memory Module CAUTION: The power of the computer must be turned off when you remove a memory module. Remove a memory module with the power on risks damaging the module or the computer itself. Do not touch memory module terminal[...]

Chapter 4 Replacement Procedures Figure 4-4-1 Remove memory slot cover Figure 4-4-2 Remove a memory module Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 4 Replacement Procedures Installing a memory module To install a memory module, confirm that the com puter is in boot mode. Then perform the following procedure (See Figure 4-4-3). 1. Insert a memory module into the connector of the com puter slantwise (term inal side first) and press it to connect firmly. CAUTION: The power must be turned [...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) 4.5 Keyboard Removing the keyboard The following describes the procedure for rem ovi ng the keyboard (See Fi gure 4-5-1 to 4-5-2). CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the frame and do n[...]

Chapter 4 Replacement Procedures Figure 4-5-1 Remove 2 screws for KB Holder Figure 4-5-2 Remove 2 screws for Keyboard Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Installing the keyboard The following describes the procedure for installing the keyboard. 1. Connect the keyboard flexible cable to the connector on the system board. 2. Slide and set the keyboard then secure it with the following[...]

Chapter 4 Replacement Procedures 4.6 Wireless LAN card and BT Module Removing a Wireless LAN card The following describes the procedure for re m oving a Wireless LAN card (See Figure 4-6-1 to 4-6-2). 1. Remove the screw of wireless LAN card.  M2x 2.5 BIND screw x2 2. Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN[...]

Chapter 4 Replacement Procedures Figure 4-6-2 Remove a wireless LAN card Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 4 Replacement Procedures Installing a Wireless LAN card The following describes the procedure for installing a W ireless LAN card. 1. Insert a wireless LAN card terminals slantwise into the connector on the com puter and press a wireless LAN card and lock the secure screws. 2. Connect the wireless LAN antenna cable to the terminals on a wir[...]

Chapter 4 Replacement Procedures 4.7 3G module card Removing 3G module card The following describes the procedure for rem oving a 3G module card (See Figure 4-7-1 to 4-7-3). 1. Remove screw of 3G module board.  M2x 3.0 BIND screw x2 2. Disconnect the 3G module antenna cable from the connectors on a 3G module card 3. Remove a 3G module card from [...]

Chapter 4 Replacement Procedures Figure 4-7-2 Remove a 3G module card Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Chapter 4 Replacement Procedures Installing a 3G module card The following describes the procedure for installing a 3G m odule card. (See Figure 4- 7-3) 1. Insert a 3G module card terminals slantwise into the connector on the system board and press a 3G module card and lock the secure screws. 2. Connect the 3G module antenna cable to the terminals [...]

Chapter 4 Replacement Procedures 4 4.8 Display Assembly Removing the display assembly The following describes the procedure for rem o ving the display assembly (See Figure 4-8-1 to 4-8-5). 1. Close the display and turn the computer upside down. 2. Remove the battery pack (See Figure 4-2-1) 3. Open HDD Door Figure 4-8-1 Remove the screws (securing d[...]

Chapter 4 Replacement Procedures Figure 4-8-2 Remove the screws (from bottom side) 5. Disassemble KB Holder and KB screw (See Figure 4-5-1) 6. Remove the screws from the top side and remove the cover. Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-27[...]

Chapter 4 Replacement Procedures M2*5 7pcs Figure 4-8-3 Remove the screws (from top side) 7. Disconnect the FFC and cables. 8. Disassembly TOP ASSY 9. Pull out the wireless LAN antenna from the guide with two hands. Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-28[...]

Chapter 4 Replacement Procedures Figure 4-8-4 Remove the Wireless Antenna and LCD cable 10. Pull out the LCD cables from the guide of system board. Figure 4-8-5 Remove the LCD cable from system board Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-29[...]

Chapter 4 Replacement Procedures 11. Pull out the LCD cables from the guide of LCD panel. Figure 4-8-6 Remove the LCD cable from LCD panel Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-30[...]

Chapter 4 Replacement Procedures Opening the display to 135degree, keeping disp lay side by hand and remove the hinge screw. ‧ M2.5  3 FLAT BIND screw x4(Lock tight) ‧ M2.5  6.5 FLAT BIND screw x2(Lock tight) M2.5*3 4pcs M2.5*6.5 2pcs Figure 4-8-7 Remove the hinge screws 12. Remove the display assembly with two hands holding from the base[...]

Chapter 4 Replacement Procedures Installing the display assembly The following describes the procedure for installing the display assembly. 1. Inserting the pole of hin ge to the hole of hinge assembly, set the display assembly with hands on the base assembly. 2. Secure the hinges with the following screws secure the display mask with the following[...]

Chapter 4 Replacement Procedures 3. Connect the LCD harness to the connector on the system board. Figure 4-8-9 Connecting LCD harness to the system board 4. Arrange the wireless antenna cables along th e guide (front) and secure them with guide . 5. Pass the cables to the back of computer through the slot . 6. Arrange the Wireless LAN antenna along[...]

Chapter 4 Replacement Procedures Figure 4-8-10 Arrange and connect Wireless LAN cable 7. Install the LAN board and Top c over Assembly of the system. NOTE : If Fingerprint or Dust left on LCD screen during disassembly and assembly LCD units, please follow Appendix A to clean it. Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance M[...]

Chapter 4 Replacement Procedures 4.9 Top Cover Assembly Removing the Top cover assembly The following describes the procedure for rem o ving the Top cover assembly (See Figure 4-9- 1 to 4-9-3). 1. Turn over the computer. 2. Remove the following screws securing the Top cover assembly from the back and bottom of computer.  M2-0.4  2 FLAT BIND s[...]

Chapter 4 Replacement Procedures 3. Remove the following screws securing the Top cover assembly from the front of computer. Pull up and remove the Top cover assembly from the Base assembly . M2.0  5.0 FLAT BIND screw Back x11 M2*5 7pcs Figure 4-9-2 Remove the screws (front) and Top cover assembly 4. Disconnect the touch pad flat cable/LAN cable/[...]

Chapter 4 Replacement Procedures Figure 4-9-3 Disconnect the touch pad flat cable/LAN cable Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-37[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-38 Installing the Top cover assembly The following describes the procedure fo r installing the Top cover assembly. 1. Install the Top cover assembly to th e Base assembly. NOTE : Be careful not to catch the cables between Top co[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-39 4.10 Touch Pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-10-1 to 4- 10-3). 1. Peel off the glass tape and disconnect the touch pad flat cable, Fingerprint cable from[...]

Chapter 4 Replacement Procedures Figure 4-10-1 Remove the touch FFC cable Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-40[...]

Chapter 4 Replacement Procedures M2-0.4*2 2pcs M2.0*3.0 2p cs M2*2-I 5pcs Figure 4-10-2 Loose the screws Figure 4-10-3 Remove the touchpad and touchpad board Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-41[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-42 Installing the touch pad The following describes the procedure for installing the touch pad. 1. Peel off the separator covering on the sensor portion of a new touch pad. NOTE : Do not reuse the touch pad so that it c an not b[...]

Chapter 4 Replacement Procedures 4.11 I/O Board The following describes for removing the I/O Board (See Figure 4-11-1). Removing the I/O Board 1. Pull out the I/O Board FFC, LAN FFC, Speaker cable from I/O board connector. 2. Loose the below screws and then incline pull out I/O Board.  M2.0x3.0 FLAT BIND screw x2 Figure 4-11-1 Remove the I/O Boa[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-44 Installing the I/O Board The following describes fo r installing the I/O Board 1. Fix the below screws then incline insert in I/O Board M2.0x3.0 FLAT BIND screw x2 2. Insert the I/O Board FFC, LAN FFC, Speaker cable into base[...]

Chapter 4 Replacement Procedures 4.12 System board CAUTION: 1. when handling the system board, always hold by the edges. Do not touch the printed circuit face. 2. if replacing with a new system board, execute the subtest01 Initial configuration in section 3.3 “Setting of the hardware configu ration”. Removing the system board The following desc[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 46 Installing the system board The following describes the procedur e for installing the system board. 1. Secure the system board with the following screws . M2.0  3 screw x2 2. Connect the LAN FFC, LCD CABLE, ANTENNA, I/O boa[...]

Chapter 4 Replacement Procedures Removing RTC battery The following describes the procedure for rem o ving the RTC battery unit (See Figure 4-12-2 to 4-12-3). 1. Pull the away the socket of RTC battery a nd use a clam p to hold RTC battery tightly. 2. Rotate battery through the way then remove it. Figure 4-12-2 Remove the RTC battery-step_1 Satelli[...]

Chapter 4 Replacement Procedures Figure 4-12-3 Remove the RTC battery-step_2 Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 48[...]

Chapter 4 Replacement Procedures Installing RTC battery The following describes the procedure for installing the RTC battery unit (See Figure 4-12-4). 1. Press the force vertically then lock the RTC battery tigh tly. Figure 4-12-4 Install the RTC battery Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 49[...]

Chapter 4 Replacement Procedures 4.13 CPU Heat Sink Removing the CPU heat sink The following describes the procedure for re m oving the CPU heat sink (See Figure 4-13-1). 1. Disconnect the Heat sink cable from the connector on the system board 2. Remove the following screws securing the heat sink holder along 1 to 3.  M2.0  2.5 screw x3 NOTE:[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 51 Installing the CPU heat sink The following describes the procedure for installing the CPU heat sink 1. Secure the following screws securing the heat sink holder along 1 to 3.  M2.0  3.0 screw x3  Disconnect the Heat s[...]

Chapter 4 Replacement Procedures 4.14 LCD unit Removing the LCD unit The following describes the procedure for re m oving the LCD unit (See Figure 4-14-1 to 4- 14-3). 1. Remove Screw MYLAR cover x4 2. Remove the following screws securing the display mask M2.0  5 screw x4 3. Insert your finger between the edge of the display mask and the LCD, and[...]

Chapter 4 Replacement Procedures Figure 4-14-2 Remove the LCD unit Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 53[...]

Chapter 4 Replacement Procedures 7. Remove the following screws securing the LCD support (LCD unit side) and rem ove the hinge from the LCD unit.  M2.0x2.5 screw x4 Figure 4-14-3 Remove the LCD hinge Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 54[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 55 Installing the LCD unit The following describes the procedure for installing the LCD unit. Install the LCD supports (LCD unit side) and hi nge to the LCD and secure them with the following screws .  M2.0  2.5 BINK screw [...]

Chapter 4 Replacement Procedures 4.15 Web Camera module Removing Web Camera module The following describes the procedure for removing the Web Camera m odule. (See Figure 4-15-1 to 4-15-2). 1. Pull off the connect or of Web Cam era module. 2. Peel off the glue of Web Camera m odule. Figure 4-15-1 Remove the connector of Web Camera module Satellite T[...]

Chapter 4 Replacement Procedures Figure 4-15-2 Peel off the glue of Web Camera module Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 57[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 58 Installing Web Camera module The following describes the procedure for installing the W eb Camera module. 1. Pull in the glue of Web Camera Module. 2. Connect the connector of Web Camera module.[...]

Chapter 4 Replacement Procedures 4.16 Application for Thermal grease on CPU and North Bridge (See Figure 4-16-1) I. The thermal grease on North Bridge and CPU Figure 4-16-1 Intel &AMD Thermal grease on North Bridge and CPU A000018310 THERMAL GREASE FCR-AS A000063980 THERMAL GREASE 7762 Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Ma[...]

Chapter 4 Replacement Procedures II. Use grease on North Bridge and CPU 0.15cc for one repair. Figure 4-16-2 Apply silicon gr ease for North Bridge and CPU Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 60[...]

Chapter 4 Replacement Procedures 4.17 Speaker Box Removing Speaker Box The following describes the procedure for re moving Speaker Box. (See Figure 4-17-1 to 4- 17-3). 1. Remove the following screws securing Speaker Box.  M2.0  2.5 screw x 4 2. Removing the Speaker Box. Figure 4-17-1 Removing the secu ring screws at left side. Satellite T130D[...]

Chapter 4 Replacement Procedures Figure 4-17-2 Removing the secu ring screws at right side Figure 4-17-3 Removing the Speaker Box. Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 62[...]

Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 63 Installing Speaker Box The following describes the proced ure for installing Speaker Box. 1. Installing the Speaker Box. 2. Securing Speaker Box of following screws .  M2.0  2.5 screw x 4[...]

Satellite T130D,Satellite ProT13 0D and PORTEGE T130D Maintenance Manual (960-Q08) Appendices[...]

Satellite T130D and Sa tellite ProT130D Maintena nce Ma nual (960-Q 08) Appendix Contents Appendix A Handling the LCD Module ............................................................................. 1 Appendix B Board Layout ................................................................................................... 1 B.1 System Board ..[...]

Satellite T130D and Sa tellite ProT130D Maintena nce Ma nual (960-Q 08) C.17 CN19 Main SATA HDD Connector………………...………………….……8 C.18 CN20 DDR Connector……………………………………………………....9 C.19 CN21 DDR Connector .................................................................................[...]

Satellite T130D and Sa tellite ProT130D Maintena nce Ma nual (960-Q 08) Appendix F Wiring Diagrams ............................................................................................. 1 F.1 RGB Monitor ID Wrapar ound Connector ....................................................... 1 F.2 LAN Loopbak Connector ..............................[...]

Handling the LCD Module Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cove r, be sure to seat it so that it is properly aligned and[...]

Handling the LCD Module 3. If the panel’s surface gets fingerprint or dus t, put on gloves and wipe it with static electricity cloth. If it is still d irty, drop some cleaning alcoho l on the surface and wipe it again. If the surface is much more fingerprint or dust, w e recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the[...]

Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite T130D, Satellite Pro[...]

Handling the LCD Module Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Maintenance Ma nual (960-Q08 )[...]

Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause m alfunctions[...]

Handling the LCD Module 10. If you transport the module, do not use p acking material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). Thes e materials can release gas that can dam age the panel’s polarization. Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Maintenance Ma nual (960-Q08 )[...]

Board Layout Appendix B Appendix B Board Layout B.1 System Board CN14 CN1 CN2 CN3 U3 CN4 CN5 CN7 CN6 U9 U11 CN8 CN9 CN11 CN12 Figure B-1-1 System board layout (front) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout CN15 CN16 CN18 CN17 CN19 CN20 CN21 U16 U17 U18 CN22 CN10 U20 CN23 Figure B-1-2 System board layout (Back) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) NUM Location Function (01) CN1 LVDS CONN (02) CN2 Power/B CONN (03) CN3 Key Board CONN (04) CN4 LAN CONN (05) CN5 11.6" SATA HDD CO NN (06) CN6 TP/B CONN (07) CN7 SATA ODD CONN (08) CN8 SIM(3G)/B CONN (09) CN9 ADO+MMC/B CONN (10) CN10 RTC BATT CON[...]

Board Layout Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) (24) U9 Embedded Controller IC (25) U11 Clock generator (26) U16 CPU (27) U17 Memory Side Port (28) U18 North Bridge (29) U20 South Bridge Table B-1-3 System board ICs and connectors[...]

Board Layout B.2 Touch Pad Board <Front layout> 08 05 06 09 01 04 03 07 10 02 Figure B-2-1 Touch Pad board layout (Front) NUM Location Function (01) SW1 Mouse Button Left key (02) SW2 Mouse Button Right key (03) LED1 AC-IN LED (04) LED2 POWER LED (05) LED3 BATT LED (06) LED4 HDD LED (07) LED5 Bridge Media LED (08) LED6 W-LAN LED (09) LED7 WiM[...]

Board Layout <Back layout> 02 01 Figure B-2-3 Touch P ad board layout (Back) NUM Location Function (01) CN2 TP Board to TP Module CONN (02) CN1 TP Board to M/B CONN Table B-2-4 Touch Pad board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout B.3 CRT Board <Front layout> Figure B-3-1 Finger Print Board layout (Front) 02 03 01 NUM Location Function (01) CN1 CRT to M/B CONN (02) CN2 CRT CONN (03) CN3 CRT to M/B CONN Table B-3-2 CRT Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout <Back layout> 01 Figure B-3-3 CRT Board layout (Back) NUM Location Function (01) U1 CRT ESD protection, level-shifting ,sync impedance matching IC Table B-3-4 Finger Print Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout B.4 Power Board <Front layout> Figure B-4-1 Power Board layout (Front) 02 01 NUM Location Function (01) SW1 Power SW (02) LED1 Power LED Table B-4-2 Power Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout <Back layout> 01 Figure B-4-3 Power Board layout (Back) NUM Location Function (01) CN1 Pow er/B to M/B CONN Table B-4-4 Power Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout B.5 SIM (3G) Board <Front layout> Figure B-5-1 SIM (3G) Board layout (Front) 01 NUM Location Function (01) CN1 SIM(3G)/B to M/B CONN Table B-5-2 SIM (3G) Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout <Back layout> Figure B-5-3 SIM (3G) Board layout (Back) 01 NUM Location Function (01) JSIM1 SIM Card CONN Table B-5-4 SIM (3G) Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout B.6 HDMI Board <Front layout> 01 02 03 Figure B-6-1 HDMI Board layout (F ront) NUM Location Function (01) CN1 HDMI CONN (02) CN2 USB CONN (03) CN3 HDMI/B to M/B CONN Table B-6-2 HDMI Board connectors Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout <Back layout> Figure B-6-3 HDMI Board layout (Back) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout B.7 ADO+MMC Board <Front layout> 01 02 03 04 05 08 09 10 07 06 Figure B-7-1 ADO+MMC Board layout (Front) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Board Layout Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) NUM Location Function (01) CN1 RJ45 CONN (02) CN4 USB CONN (03) CN5 USB CONN (04) CN6 Earphone CONN (05) CN7 Inner Speaker CONN (06) CN8 External MIC CONN (07) CN9 5 IN 1 Card Reader CONN (08) CN10 Inner Speaker CONN (09) CN11 Reserved MIC CONN (10) CN[...]

Board Layout <Back layout> 02 01 Figure B-7-3 ADO+MMC Board layout (Back) NUM Location Function (01) U4 Codec IC (02) U5 Carder Reader IC Table B-7-4 ADO+MMC Board IC Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08)[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Appendix C Pin Assignment CN1 LCD Panel Connectors PIN No. Signal name I/O PIN No. Signal name I/O 1 VIN --- 2 VIN --- 3 LCDVCC --- 4 LCDVCC --- 5 +3V --- 6 CCD_POWER --- 7 MIC_GND --- 8 INT_MIC_R I/O 9 GND --- 10 GND --- 11 USBP10-_LCD I/O 12 USBP10[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) CN 3 Keyboard Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 K_LED_P --- 2 MY16 O 3 --- --- 4 MX17 O 5 --- --- 6 K_LED_P --- 7 MY2 O 8 MY1 O 9 MY0 O 10 MY4 O 11 MY3 O 12 MY5 O 13 MY14 O 14 MY6 O 15 MY7 O 16 MY13 O 17 MY8 O 18 MY9 O 19 MY[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 3 TX1N --- 4 GND --- 5 TX0P --- 6 TX0N --- CN5 SATA HDD Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 GND --- 2 SATA_TXP0 O 3 SATA_TXN0 O 4 GND --- 5 SATA_RXN0 I 6 SATA_RXP0 I 7 GND --- 8 NC --- 9 +5V --- 10 +5V --- CN6 Touchpad Board C[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) CN 8 SIM(3G)/B Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 GND --- 2 UIM_CLK I/O 3 GND --- 4 UIM_DATA O 5 GND --- 6 UIM_RST O 7 UIM_VPP O 8 UIM_PWR O 9 GND --- 10 USBP6+ I/O 11 USBP6- I/O 12 GND --- CN9 ADO+MMC Board Connecto r PIN No[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 25 +3V --- 26 NC --- 27 +5V --- 28 +5V --- 29 +5V --- 30 +5VPCU --- 31 +5VPCU --- 32 +5VPCU --- 33 +5VPCU --- 34 +5VPCU --- 35 NC --- 36 MMC_LED# I/O 37 PLTRST# I 38 GND --- 39 USBP11+ I/O 40 USBP11- I/O CN10 RTC Battery Connecto r PIN No. Signal nam[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 19 HDMI_CON_DDCDATA I/O 20 HDMI_CON_DDCCLK O 21 GND --- 22 HDMICLKN O 23 HDMICLKP O 24 GND --- 25 HDMITX0N O 26 HDMITX0P O 27 GND --- 28 HDMITX1N O 29 HDMITX1P O 30 GND --- 31 HDMITX2N O 32 HDMITX2P O CN12 Blue Tooth Connect or PIN No. Signal name I/[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) CN15 FAN Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 TH_FAN_POWER1 --- 2 GND --- 3 FANSIG1 O CN16 CRT Connector PIN No. Signal name I/O PIN No . Sig nal name I/O 1 +5V --- 2 +3V 3 NC --- 4 NC --- 5 GND --- 6 DDCDAT I/O 7 VSYNC --- 8 D[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 9 GND --- 10 CRT_G O 11 GND --- 12 CRT_R O 13 GND --- 14 NC --- 15 +3V --- 16 +5V --- CN18 HDT Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 GND --- 2 GND --- 3 CPU_LDT_RST# O 4 GND --- 5 CPU_PWRGD --- 6 GND --- 7 CPU_DBREQ# O 8 GND ---[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 3 SATA_TXN0 O 4 GND --- 5 SATA_RXN0 I 6 SATA_RXP0 I 7 GND --- 8 +3.3VSATA1 --- 9 +3.3VSATA1 --- 10 +3.3VSATA1 --- 11 GND --- 12 GND --- 13 GND --- 14 +5V --- 15 +5V --- 16 +5V --- 17 GND --- 18 NC --- 19 GND --- 20 NC --- 21 NC --- 22 NC --- 23 GND -[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 21 GND --- 22 MEM_MA_DATA13 I/O 23 MEM_MA_DATA8 I/O 24 GND --- 25 MEM_MA_DATA9 I/O 26 MEM_MA_D M1 I 27 GND --- 28 GND --- 29 MEM_MA _DQS1_N I/O 30 MEM_MA _CLK1_P I/O 31 MEM_MA _DQS1_P I/O 32 MEM_MA _CLK1_N I/O 33 GND --- 34 GND --- 35 MEM_MA_DATA14 I[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 71 GND --- 72 GND --- 73 MEM_MB_DATA30 I/O 74 MEM_MB_DATA27 I/O 75 MEM_MB_DATA31 I/O 76 MEM_MB_DATA26 I/O 77 GND --- 78 GND --- 79 MEM_MB_CKE0 I 80 MEM_MB_C KE1 I 81 +1.8VSUS --- 82 +1.8VSUS --- 83 NC --- 84 MEM_MB_ADD15 I 85 MEM_MA_BANK2 I 86 MEM_MB[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 123 MEM_MA_DATA37 I/O 124 MEM_MA_DATA38 I/O 125 MEM_MA_DATA_32 I/O 126 MEM_MA_DATA36 I/O 127 GND --- 128 GND --- 129 MEM_MA_B_DQSQ_N I/O 130 MEM_MA_DM4 I 131 MEM_MA_B_DQSQ_P I/O 132 GND --- 133 GND --- 134 MEM_MA_DATA_34 I/O 135 MEM_MA_DATA_33 I/O 13[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 173 MEM_MA_DATA_54 I/O 174 MEM_MA_DATA_50 I/O 175 MEM_MA_DATA_51 I/O 176 MEM_MA_DATA_55 I/O 177 GND --- 178 GND --- 179 MEM_MA_DATA_61 I/O 180 MEM_MA_DATA_58 I/O 181 MEM_MA_DATA_57 I/O 182 MEM_MA_DATA_60 I/O 183 GND --- 184 GND --- 185 MEM_MA_DM7 I/O[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 17 MEM_MA_DATA3 I/O 18 GND --- 19 MEM_MA_DATA2 I/O 20 MEM_MA_DATA9 I/O 21 GND --- 22 MEM_MA_DATA8 I/O 23 MEM_MA_DATA13 I/O 24 GND --- 25 MEM_MA_DATA12 I/O 26 MEM_MA_DM1 I 27 GND --- 28 GND --- 29 MEM_MA _DQS1_N I/O 30 MEM_MA _CLK1_P I/O 31 MEM_MA _DQ[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 69 MEM_MB_RESET#2 I/O 70 MEM_MB_DQS3_P I/O 71 GND --- 72 GND --- 73 MEM_MB_DATA30 I/O 74 MEM_MB_DATA27 I/O 75 MEM_MB_DATA31 I/O 76 MEM_MB_DATA26 I/O 77 GND --- 78 GND --- 79 MEM_MB_CKE0 I 80 MEM_MB_CKE1 I 81 +1.8VSUS --- 82 +1.8VSUS --- 83 NC --- 84 [...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 121 GND --- 122 GND --- 123 MEM_MA_DATA38 I/O 124 MEM_MA_DATA35 I/O 125 MEM_MA_DATA_34 I/O 126 MEM_MA_DATA39 I/O 127 GND --- 128 GND --- 129 MEM_MA_B_DQSQ_N I/O 130 MEM_MA_DM4 I 131 MEM_MA_B_DQSQ_P I/O 132 GND --- 133 GND --- 134 MEM_MA_DATA_36 I/O 1[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 171 GND --- 172 GND --- 173 MEM_MA_DATA_54 I/O 174 MEM_MA_DATA_51 I/O 175 MEM_MA_DATA_55 I/O 176 MEM_MA_DATA_50 I/O 177 GND --- 178 GND --- 179 MEM_MA_DATA_57 I/O 180 MEM_MA_DATA_56 I/O 181 MEM_MA_DATA_60 I/O 182 MEM_MA_DATA_61 I/O 183 GND --- 184 GN[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 15 GND --- 16 UIM_VPP I 17 NC --- 18 GND --- 19 NC --- 20 3G_EN I 21 GND --- 22 PLTRST# I 23 PCIE_RXN3 O 24 +3V_3G --- 25 PCIE_RXP3 O 26 GND --- 27 GND --- 28 +1.5V_3G --- 29 GND --- 30 SB_SCLK2 I/O 31 PCIE_TXN3 I 32 SB_SDATA2 I/O 33 PCIE_TXP3 I 34 G[...]

Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 7 NC --- 8 LAD0 I/O 9 GND --- 10 LAD1 I/O 11 CLK_PCIE_MINI# I 12 LAD2 I/O 13 CLK_PCIE_MINI I 14 LAD3 I/O 15 GND --- 16 LFRAME# I 17 NC --- 18 GND --- 19 NC --- 20 RF_EN I 21 GND --- 22 PLTRST# I 23 PCIE_RXN2 O 24 +3V_WL_VAUX --- 25 PCIE_RXP2 O 26 GND[...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Appendix. D Appendix D Display Codes D.1 Display Codes Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 # 04 84 26 F0 26 05 4 $ 05 85 25 F0 25 06 5 % 06 86 2E F0[...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2B 35 G 22 A2 34 F0 34 36 H 23 A3 33 F0 33 37 J 24 A4 3[...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0 D2 E0 70 E0 F0 70 *1 76 Del E0 53 E0 D3 E0 71 E0 F0 [...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203 Win E0 5B E0 DB E0 1F E0 F0 1F 204 App E0 5D E0 DD [...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Key top Make Break Make Brea k 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E0 53 E0 D3 E0 2A E0 F0 12 E0 71 E0 F0 71 E0 12 79 ?[...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79  E0 2A E0 4B E0 CB E0 AA E0 12 E0 6B E0 F0 6B E0 F0 12 80 H[...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Key top Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 F0 74 26 P (–) 4A CA 7B F0 7B 37 J (1) 4F CF 69 F0[...]

Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Key top Shift Make Make Pause Co mmo n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E Table D-1-7 No.126 key scan code *: This key generates only make codes.[...]

Keyboard Layout Appendix E Keyboard Layout 1. United Status (US) K eyboard Figure E-1-1 US keyboard 2. United Kingdom (UK) K eyboard Figure E-2-1 UK keyboard _____________ ____________ ____________ ____________ ____________ _______________ ____________ ____________ ____ Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-[...]

Keyboard Layout 3. Japan K eyboard Figure E-3-1 Japan keyboard _____________ ____________ ____________ ____________ ____________ _______________ ____________ ____________ ____ Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 )[...]

Wiring Diagrams Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector B Monitor ID Wraparound connector (16PIN to 16PIN) (1) +5V (2) + 3V (3) N C (4) N C (5) GND ( 6 ) D DCDA T ( 7 ) V SYN C ( 8 ) D DCCL K ( 9 ) H SY NC (10 ) G ND ( 1 1 ) G ND ( 1 2 ) CRT _R ( 1 3 ) CRT _G ( 1 4 ) G ND ( 1 5 ) G ND ( 16 ) CRT _ B +5 V ( 1) +[...]