Toshiba R10 manuel d'utilisation

SATELLITE R10 SATELLITE R10 SATELLITE R10 SATELLITE R10 SATELLITE R10 SATELLITE R10 Choose freedom. Choose freedom. computers.toshiba-europe.com Satellite R10 User ’ s Manual[...]

Satellite R10 ii Copyright © 2005 by TOSHIBA Corporation. All ri ghts reserved. Und er the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA Satellite R10 Portable Personal Computer U ser?[...]

Satellite R10 iii T ruSurround XT , WOW XT , T ruBass, SRS 3D and FOCUS technologies are incorporated under license fr om SRS Labs, Inc. InterV ideo and WinDVD are r egistered trad emarks of the Inter Video Inc. WinDVD Cr eator is trademark of the InterV ideo Inc. Other trademarks and registered trademarks not listed above may be used in this manua[...]

Satellite R10 iv W orking environment This product was desig ned to fulfill th e EMC (Electr omagnetic Compatibility) requir ements for “residential, commercial and light industry environments”. The following environments are not approved: ■ Industrial Environments (e.g. en ivr onments with a mains voltage 380V) In the following environments [...]

Satellite R10 v Modem warning notice Conformity Statement The equipment has been appr oved to [Commission Decision “CTR21”] for pan-European single termina l connection to the Pu blic Switched T elephone Network (PSTN). However , due to differences between the individual PSTNs provided in different countries/r egion s the approval does not, of [...]

Satellite R10 vi Description on La ser specification The optical disc driv e such as DV D-ROM drive, DVD-R OM&CD-R/RW drive and DVD Super Multi drive that is used in this computer is equipped with laser . The classification label w ith the followi ng sentence is a ffixed to the surface of the drive. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1[...]

User’ s Manual vii Satellite R10 T able of Contents General Precautions S tress injury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Heat injury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Pressure or imp a ct damage . . . . . . . . . . . . . . . . . . . . . . .[...]

Satellite R10 viii Chapter 2 The Grand T our Front wi th the display closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Left side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Back side .[...]

Satellite R10 ix Chapter 4 Operating Bas ics Using the T ouch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the T ablet PC Pen and Reserve Pen . . . . . . . . . . . . . . . . . 4-2 Removing the T ablet PC Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Inserting the T ablet PC Pen . . . . . . . . [...]

Satellite R10 x Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 When using WinDVD Creator Platinum . . . . . . . . . . . . . . . . . . . 4-26 How to make a DVD-V ideo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 How to learn more about InterVideo WinDVD Creator . . . . . . . . 4-2[...]

Satellite R10 xi Chapter 5 The Keyboard T ypewriter k eys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Function keys: F1 … F12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Soft keys: Fn key comb inations . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Emulating keys on enhanced keybo[...]

Satellite R10 xii Chapter 6 Power and Power -Up Modes Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Power indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Battery indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 DC IN ind[...]

Satellite R10 xiii Chapter 8 Optional Devices PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Inserting a PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Removing a PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 SD card . . . . . .[...]

Satellite R10 xiv Chapter 9 T roubleshooting Problem solving process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Preliminary checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Analyzing the problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Hardwar e and system checklis[...]

User’ s Manual xv Satellite R10 Gener al Pr ecautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . However , certain precautions should be observed to further reduce the risk of personal injury or damage to the computer . Be certain to read the general precautions below and to note [...]

Satellite R10 xvi General Precautions PC car d o verhea ting Some PC cards can become hot with prolo nged use. Overheating of a PC card can result in errors or instability in the PC card operation. Also be careful when you remove a PC card that has been used for a long time. Mobile phones Use of mobile ph ones can interfere with th e audio system. [...]

Satellite R10 xvii General Precautions Under some conditions, your comput er product may automatical ly shut- down. This is a normal protective featur e designed to reduce the ri sk of lost data or damage to the product when used outside recommended conditions. T o avoid risk of lost data, always make back-up copies of data by periodically storing [...]

User’ s Manual xviii Satellite R10 Pr eface Congratulations on your purchase of the Satellite R10 computer . This powerful notebook comput er provid es excellent expa nsion capability , including multimedia devices, and it is designed to provide years of re liable, high-performance computing. This manual tells how to set up and begin using your S[...]

Satellite R10 xix Preface Manual contents This manual is composed of the follow ing n ine chapters, five appendixes, a glossary and an index. Chapter 1, Introduction , is an overview of the computer’ s features, capabilities, and options. Chapter 2, The Grand T our , id entifies the compone nts of the computer and briefly explains how they functi[...]

Satellite R10 xx Preface Conventions This manual uses the following forma t s to describe, identify , and highlight terms and operating procedures. Abbr eviations On first appearance, and whenever necessary f or clarity , abbr eviations are enclosed in parentheses following their defini tion. For example: Read Only Memory (ROM). Acronyms are also d[...]

Satellite R10 xxi Preface Messages Messages are used in this manual to bring important information to your attention. Each type of message is identif ied as shown below . Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause dat a loss or damage your equipment. Please read. A note i s a hint[...]

User’ s Manual 1-1 Satellite R10 Chapter 1 Intr oduction This chapter provides an equipment checklist, and it identifies the computer’ s features, options and accessories. Equipment checklist Carefully unpack your computer . Save the box and packing materials for future use. Ha rd w are Check to make sure you have all the following items: ■ S[...]

Satellite R10 1-2 Introduction Softwar e Microsoft ® Windows XP T a blet PC Edition ■ The following software is pr einstalled: ■ Microsoft ® Win dows XP T ablet PC Edition ■ Microsoft Internet Explorer ■ TOSHIBA Utilities ■ TOSHIBA SD Memory Boot Utility ■ DVD Vi deo Player ■ TOSHIBA T ouch Pad On/Off Utility ■ TOSHIBA Power Saver[...]

Satellite R10 1-3 Introduction Processor Memory Power Built- in The computer is equipped with an Intel ® processor . ■ Intel ® Celeron ® M pr ocessor , which incorporates a 32 KB level 1 cache memory and a 1 MB level 2 cache memory . ■ Intel ® Pentium ® M processor , which incorporates a 32 KB level 1 cache memory and a 2 MB level 2 cache [...]

Satellite R10 1-4 Introduction Disks Hard disk drive Available in four sizes. ■ 40.0 billion bytes (37.26 GB) ■ 60.0 billion bytes (55.89 GB) ■ 80.0 billion bytes (74.53 GB) ■ 100 billion bytes (93.16GB) USB floppy d isk drive Accommodates either 3 1/2" 1.44-megabyte or 720-kilobyte floppy disks. It connects to a USB port. Provided wit[...]

Satellite R10 1-5 Introduction Display The computer’ s LCD display panel suppo rts high-resolution video graphics. The LCD scr een can be set at a wide range of viewing angles for maximum comfort and readability . DVD Super Multi drive Some models are equipped with a full-size DVD Super Multi drive module th at lets you record data to rewritable [...]

Satellite R10 1-6 Introduction Keyboard TOSHIBA Pointing Device Ports Slots Built- in 85 keys or 86 keys, compatible with IBM ® enhanced key board, embedded nu meric overlay , dedicated cursor cont rol, and keys. Refer to Chapter 5, The Keyboard , for details. Built-in T ouch Pad A T ouch Pad and control buttons in the palm rest enable control of [...]

Satellite R10 1-7 Introduction Multimedi a Communications Sound system Windows sound system compatible sound system provides internal speakers and microphon e as well as jacks for an external microphone and headphone. Video-out jack (S-Video ) The video out jack lets you transfer video data to external devices. Data output depends on the type of de[...]

Satellite R10 1-8 Introduction Wireless LAN Some computers in this seri es are equipped with a Wireless LAN mini-PCI card that is compatible with other LAN systems based on Dir ect Sequence Spread Sp ectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard (Revision A, B or G). ■ Theoretical m[...]

Satellite R10 1-9 Introduction Security Special featur es The following featur es are either unique to TOSHIBA computers or ar e advanced features, which make the computer more convenient to use. Security lock slot Connects an optional security lock to anchor the computer to a desk or other large object. Slim Select Bay lock Slim Select Bay module [...]

Satellite R10 1-10 Introduction Power on passwor d T wo levels of password se curity , supervisor and user , are availabl e to prevent unauthorized access to your com puter . Instant security A hot key function blanks the LCD screen and disables the computer providing data security . Intelligent power supply A micropr ocessor in the computer’ s i[...]

Satellite R10 1-11 Introduction Optical media drive power icon Use this to turn the power of the optical media drive on or off. Clicking on the optical media drive icon on the taskb ar will turn the power of the optical media drive on or of f. If the optical media drive power is of f, the disc tray will not open even if the eject button is pushed. [...]

Satellite R10 1-12 Introduction Utilities This section describes preinstalled utili ties and tells how to start them. For details on operations, refer to each utility’ s onlin e manual, help files or readme.txt files. TOSHIBA Power Saver T o access this power savings management program, click st art , click Control Panel , click Performance and M[...]

Satellite R10 1-13 Introduction TOSHIBA PC Diagnostic T o ol TOSHIBA PC Diagnostic T ool displays the basic information on PC, and the test of built-in devices can also be performed. T o start TOSHIBA PC Diagnostic T ool, click start , point to All Programs , point to TO SHIBA , point to Utilities and click PC Diagnostic T ool . TOSHIBA Mobile Exte[...]

Satellite R10 1-14 Introduction Sound drivers A broad range of audio controls are available through the ADI sound driver , i ncluding Software Synthesize, Mic V olume, Noise Reduction and Audio Power Management. Click start , click Control Panel and click SoundMAX icon to change the Mic Noise Reduction settings and the Power Management settings. If[...]

Satellite R10 1-15 Introduction Options Y ou can add a number of options to make your computer even more powerful and convenien t to use. The following options are available: TOSHIBA Accelerom eter Utilities When TOSHIBA Accelerometer Utilities is enabled, you can invoke the Start me nu, switch active windows or launch predefined applications by sh[...]

Satellite R10 1-16 Introduction Slim Select Bay options The following modules can be installed in the Slim Sel ect Bay . All other modules are options. Advanced Port Replicator III The Advanced Port Replic ator III provides the ports available on the co mputer in addition to separate PS/2 mouse and PS/2 keyboar d ports, a digital visual interface ([...]

User’ s Manual 2-1 Satellite R10 Chapter 2 The Grand T our This chapter identifies th e various components of your computer . Become familiar with ea ch component before you operate the compu ter . Front with the display closed The following figure shows the compute r’ s front with its LCD display panel in the closed position. Front of the comp[...]

Satellite R10 2-2 The Grand T our Left side The following figur e shows the computer’ s left side. The left side o f the computer System indicators LEDs let you monitor the status of various computer functions. D etails are given in the System indicators section. Wireles s communication switch Slide this switch to the left to tur n off Wireless L[...]

Satellite R10 2-3 The Grand T our Cooling vents Cooling vents help CPU keep from overheating. Do not block the cooling vents. Do no t insert or allow foreign objects to enter the cooling vents. If pins or similar objects are inserted into the computer , the computer’ s circuitry may be damaged. Security lock slot A security cable attaches to this[...]

Satellite R10 2-4 The Grand T our Right side The following figur e shows the computer’ s right side. The right side of the computer T AB LET PC P EN SLOT S LIM S ELECT B AY TOSHIBA A PPLICATION B UTTON L OCK TOSHIBA A PPLICATION B UTTON T AB LET PC P EN T ablet PC Pen Pen is contained in the right hand side. A pen enables data entry directly thro[...]

Satellite R10 2-5 The Grand T our Back side The following figur e shows the computer’ s back side. The back side of the computer USB PORT E XTERNAL MONITOR PORT DC IN 15V JACK L INK IND I CATOR ( GREEN ) V IDEO - OUT JACK LAN JACK M ODEM JACK LAN ACTIVE INDICATOR ( ORANGE ) Universal Serial Bus (USB 2.0) port The Universal Serial Bus port is on t[...]

Satellite R10 2-6 The Grand T our Underside The following figure shows the undersi de of the computer . Make sure the display is closed before turning over your computer . The underside of the com puter Link indicator (green) This indicator glows green when the computer is connected to a LAN and the LAN is functionin g proper ly . LAN active indica[...]

Satellite R10 2-7 The Grand T our Be sure to lock the Slim Sel ect Bay lock before you transport or carry the computer . Slim Select Bay lock screw One screw secur es the Slim Select Bay lock. Docking interface This port enables conne ction of an optional Advanced Port Replicator III described in Chapte r 8, Optional Devices . Keep foreign objects [...]

Satellite R10 2-8 The Grand T our Front with the display open This section shows the co mputer with the LCD display panel open. Refer to the appropriate illustration for details. T o open the display , push the display latch on the front of the LCD display panel and lift up. Position the LCD display panel at a comfortable viewing angl e. The front [...]

Satellite R10 2-9 The Grand T our Stereo speakers The speakers emit soun d generated by your software as well as au dio alarms, such as low battery condition, generated by the system . T o uch Pad contro l buttons Control buttons below the T ouch Pad let you select menu items or manipulate text and graphics desig nated by the on-sc ree n pointer . [...]

Satellite R10 2-10 The Grand T our System indicators LEDs beneath icons, light wh en various computer operations are in progr ess. System indicators DC IN The DC IN indicator glows in green when DC power is supplied fr om the AC power adaptor . If the adaptor’ s output voltage is abnormal or if the power supply malfunctions, this indicator flashe[...]

Satellite R10 2-11 The Grand T our Keyboard indicators The figures below show the positions of the keypad overlay indicators and the Caps Lock indicator . When the Arrow mode indicator glow s the keypad over lay lets you control the cursor . When the Numeric mode indicator glows the keypad overlay let s you enter numbers. When the Caps Lock indicat[...]

Satellite R10 2-12 The Grand T our USB floppy disk drive (o ptional) USB floppy disk drive accommodates 1.44-megabyte or 720-kilobyte floppy disks. It connects to the USB port. Option or provided with some models. USB floppy disk drive USB connector Ins ert this connector to the USB port of your computer . Disk-In-Use Indicator This indicator light[...]

Satellite R10 2-13 The Grand T our Optical media drives One of the following optical media dri ves is installed in the computer: DVD-ROM, DVD-R OM&CD-R/RW and DVD Super Multi. An A T API interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD , an indicator on the drive glows. For information on loading an[...]

Satellite R10 2-14 The Grand T our DVDs ■ DVD-R and DVD+R discs can be writ ten only once. The recorded data cannot be erased or changed. ■ DVD-RW , DVD+RW and DVD-RAM discs can be recorded more than once. Formats The drives support th e fo llowing f ormats: DVD-RO M drive The full-size DVD-ROM drive module le ts you run either 12 cm (4.72"[...]

Satellite R10 2-15 The Grand T our DVD Super Multi dri ve The full-size DVD Super Mult i drive module lets you r ecord data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor . DVD Super Multi drive Doub le Layer The full-size DVD Super Mult i drive module lets you r ecord data to re[...]

Satellite R10 2-16 The Grand T our AC adaptor The AC adaptor can automati cally adjust to an y voltage ranging from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you t o use this computer in almost any country/region. And the adaptor converts AC power to DC power and reduces th e voltage supplied to this computer . T o rech[...]

User’ s Manual 3-1 Satellite R10 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer . It covers the following topics: ■ Setting up your work space — for your health and safety ■ Operating the computer in T ablet mode ■ Connecting the AC adaptor ■ Opening the display ■ T ur ning on [...]

Satellite R10 3-2 Getting Started General conditions In general, if you are comfortable, so is your computer , but read the following to make sure your work site pr ovides a proper environment. ■ Make sur e there is ad equate spac e arou nd the computer for proper ventilation. ■ Make sure the AC power cord connects t o an outlet tha t is close [...]

Satellite R10 3-3 Getting Started Seating and postur e The height of your chai r in relation to the computer a nd keyboard as well as the support it gives your body ar e prim ary factors in reduc ing work strain. Refer to the following tips. Posture and positioning of the computer ■ Place your chair so that the keyboard is at or slightly below th[...]

Satellite R10 3-4 Getting Started Wo r k h a b i t s A key to avoiding discomfort or injury fr om repetitive strain is to vary your activities. If possible, sche dule a variety of tas ks into your workday . If you must spend long periods at the computer , finding ways to break up the rou tine can r educe stress and impr ove your effici ency . ■ S[...]

Satellite R10 3-5 Getting Started ■ Do not drop the computer nor apply excessive impact on the computer . Do not leave the computer in an automobi le where the computer is exposed to direct sunbeam. ■ Do not put the computer in T ablet mode in a bag. ■ The display panel works as a touch se nsitive digitizer screen. However , the outer edges o[...]

Satellite R10 3-6 Getting Started 1. Connect the powe r cord to the AC adaptor . Connecting the power cord to the AC adaptor (2-pin plug) Connecting the power cord to the AC adaptor (3-pin plug) 2. Connect the AC adaptor’ s DC output plug to the DC IN 15V jack on the back of the computer . ■ Use only the AC adaptor supplied with your computer o[...]

Satellite R10 3-7 Getting Started Connecting the adaptor to the computer 3. Plug the power cord into a live wall ou tlet. The Battery and DC IN indicators on the front of the computer should glow . Opening the display The computer’ s LCD display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the f[...]

Satellite R10 3-8 Getting Started T urning on the power This section describes ho w to turn on the power . The Power button LED indicates the status. Refer to the Power indicators section in Chapter 6, Power and Power -Up Modes. 1. Open the computer’ s LCD display panel. 2. Slide and hold the computer’ s power button towar d the right. Tu r n i[...]

Satellite R10 3-9 Getting Started T urning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the op erating system’ s main screen. 1. If you have entere d dat[...]

Satellite R10 3-10 Getting Started ■ Y ou can return to your previous working en vironme nt immediately when you turn on the computer . ■ Saves power by shutting down the system when the computer receives no input or hardware access for the du ration set by the System hibernate feature. ■ Y ou can use the panel power of f feature. Starting Hi[...]

Satellite R10 3-11 Getting Started Standby mode If you have to interrupt your work, yo u can turn off the power without exiting from your softwar e. Data is maintain ed in the computer ’ s main memory . When you turn on the power again, you can continue workin g right where you left off. Benefits of standby The standby feature pr ovides the follo[...]

Satellite R10 3-12 Getting Started Executing standby Y ou can enter standby mode in one of three ways: 1. Click start , click T ur n Off Computer and click Stand By . 2. Close the computer’ s LCD display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. Open Performan[...]

Satellite R10 3-13 Getting Started Restoring the preinstalled softwar e If preinstalled files are damaged, use the Pr oduct Recovery Media to restore them. T o restore the operating system and all preinstalled sof tware, follow the steps below . 1. Load the Product Recovery Media in the optional optical media dri ve and turn off the computer’ s p[...]

User’ s Manual 4-1 Satellite R10 Chapter 4 Operating Basics This chapter gives informa tion on basic operat ions including using the T ouc hPad, T ablet PC Pen and Reserve Pe n, USB floppy disk drive, changing to the T ablet mode, changing the screen orientation, cha nging to the laptop mode, changing Slim Select Bay mo dules, optical media drive[...]

Satellite R10 4-2 Operating Basi cs Using the T ablet PC Pen and Reserve Pen Y ou can use the T able t PC Pen to execute actions and ent er data. Hold the T a blet PC Pen in a natural position an d tap, pr ess or trace on the screen lightly . Before you begin using your comp uter for the first ti me, you will need to calibrate the T ablet PC Pen. S[...]

Satellite R10 4-3 Operating Basi cs Observe the foll owing precautions on the handling of the T ablet PC Pen. ■ Do not tap or press the T ablet PC Pen forcefully against the Display screen. It co uld damage the T ablet PC Pen and Display screen . ■ Avoid using or keeping the T ablet PC Pen in the place of rapid temperature change or in a car wh[...]

Satellite R10 4-4 Operating Basi cs Removing the T ablet PC Pen Remove the T ablet PC Pen as described below . 1. Gently push the T ablet PC Pen down. The pen rises up slightly . Removing the T ablet P C Pen 2. Pull the T ablet PC Pen to remove it fr om the T ablet PC Pen slot. Inserting the T ablet PC Pen The T ablet PC Pen is included in the prod[...]

Satellite R10 4-5 Operating Basi cs Double tap Lightly tap the tip of the T abl et PC Pen twice on an object and lift it immediately to execu te an action. A doub le-tap is similar to double-clicking the left touch pad control button. Press and hold T ouch th e tip of the T ablet PC Pen to the display screen and hold it there to display a pop-up me[...]

Satellite R10 4-6 Operating Basi cs Removing the Reserve Pe n (optional) Remove the Reserve Pen as describ ed below . 1. Remove the battery pack. 2. Pull the insulator an d detach the Re serve Pen fr om the Pen holder ( ➀ ) and remove the Reserve Pen ( ➁ ). Removing the Reserve Pen 3. Reinstall the batt ery pack. Inserting the Reserve Pen 1. Re[...]

Satellite R10 4-7 Operating Basi cs Changing to the T ablet mode T o change from laptop mode to the T ablet mode, follow the instructions below . Changing to the T ablet mode (1) 1. Open the LCD displ ay panel to the upright position. Ch eck that the angle of the keyboard and the LCD display panel is 90 degr ees. ■ Place the computer on a stable,[...]

Satellite R10 4-8 Operating Basi cs 2. Rotate the LCD display panel clockwise slowly . Changing to the T ablet mode (2) 3. T ur n the displ ay latch in 18 0 degrees to the down side. 4. Close the LCD display pa nel sl owly with LCD surf ace outside. Changing to the T ablet mode (3) 5. T ur n the display latch downward. 6. Insert the display latch i[...]

Satellite R10 4-9 Operating Basi cs 7. Press the LCD display panel downwar d softly . Changing to the T ablet mode (4) Changing the screen orientation The orientation of desktop scr een can be changed to one of the following four display modes: Figure 4-12 Four display modes D ISPLAY LATCH S LIT Secondary portrait Primary portrait Secondary landsca[...]

Satellite R10 4-10 Operating Basi cs Method 1: Changing the scr een orientation using TOSHIBA Accelerometer Utilities When the TOSHIBA Accelerometer Utilities are enabled, you can invoke the Start menu, switch active windows or lau nch pre defined applications by shaking the computer vertically or horizontally , or tilting it. ■ Execute the follo[...]

Satellite R10 4-11 Operating Basi cs It is safe that you hold the computer with both hands horizontally as shown in the example. Shake the computer Method 2: Changing the screen orientation using Cr oss Function Button 1. Press the Cr oss Funct ion Button for more than one second. The TOSHIBA T ablet Menu will appear . 2. Select the Internal Monito[...]

Satellite R10 4-12 Operating Basi cs Changing to the laptop mode T o change the T ablet mode to the lapt op mode, follow the instructions below . 1. Press the Display latch and raise the display to the upright position carefully . 2. Rotate the display counter -clockwise slowly . 3. T ur n the display latch toward you for the next closing of the di[...]

Satellite R10 4-13 Operating Basi cs Disconnecting USB floppy disk d rive When you have finished using the USB floppy disk drive, foll ow the procedur es below to disconnect it: 1. W ait for t he indicator light to go out to make sure all floppy disk activity has stopped. 2. Click the Safely Remove Hardware icon on the T ask Bar . 3. Click floppy d[...]

Satellite R10 4-14 Operating Basi cs Removing the optical media drive Inserting a module Insert the Slim Select Bay HD D adaptor as described below . 1. Insert the Slim Select Bay HDD adaptor in the compute r as shown below and press until the ejector clicks. 2. If you want to lock the Slim Select Bay HDD ada ptor , set the Slim Select Bay lock scr[...]

Satellite R10 4-15 Operating Basi cs Using optical media drives The text and illustrations in this section refer primarily to the optional media drive. However , operation is the same for other optical drive in the Slim Select Bay . The full-size drive provides high-performance exec ution of CD/ DVD-ROM-base d programs. Y ou can run either 12 cm (4[...]

Satellite R10 4-16 Operating Basi cs 2. Grasp the disc tray gently and pull until it is fully opened. Pulling the disc tray open 3. Lay the CD/DVD, label side up, in the disc tray . Inserting a CD/DVD 4. Press gently at the center of the CD/DVD until you feel it click into place. The CD/DVD should lie below the to p of the spindle, flush with the s[...]

Satellite R10 4-17 Operating Basi cs 5. Push the center of the disc tray to cl ose it. Pr ess gently until i t locks in to place. Closing the CD/DVD disc tray Removing discs T o remove the CD/DVD, follow the steps below . 1. T o pop the disc tray partially open , press the eject button. Gently pull the disc tray out until it is fully opened. 2. The[...]

Satellite R10 4-18 Operating Basi cs How to remove CD/DVD when the disk tray will not open Pressing the eject button will not open the disc tray wh en the computer power is off. If the power is of f, you can open the disc tr ay by inserting a slender object (about 15 mm) such as a straightened pa per clip into the eject hole just to the right of th[...]

Satellite R10 4-19 Operating Basi cs Before writing or r ewriting Please observe the following points when you write or rewrite the data. ■ W e recommend the following manufacturers of CD-R and CD-RW media. Media quality can affect write or rewrite success rates. TOSHIBA has confirmed the operation of CD -R and CD-R W media of the manufacturers a[...]

Satellite R10 4-20 Operating Basi cs When writing or r e writing Note the following when you write or rewrite a CD-R or CD-RW . ■ Always copy data from the HDD to the CD. Do not use cut-and-paste . The original data will be lost if there is a write err or . ■ Do not perform any of the following actions: ■ Change users in the Windows XP operat[...]

Satellite R10 4-21 Operating Basi cs Important message Before you write or rewrite to CD-R /RW or DVD-R/-R W/+R/+RW/-RAM disc, read and follow all setup and operating inst ructions in t his section. If you fail to do so, the DVD Super Multi drive ma y not function properly , and you may fail to write or rewrite, lose data or incur other damage. Dis[...]

Satellite R10 4-22 Operating Basi cs CD-R: T AIYO YUDEN CO., L TD. MITSUBISHI CHEMICAL CORPORA TION RICOH Co., Ltd. Hitachi Maxell Ltd. CD-RW: (Multi-Speed and High-Speed) MITSUBISHI CHEMICAL CORPORA TION RICOH Co., Ltd. CD-RW: (Ultra-Speed ) MITSUBISHI CHEMICAL CORPORA TION DVD-R: DVD S pecifications for Record able Disc for General V ersion 2.0 T[...]

Satellite R10 4-23 Operating Basi cs ■ If the disc is poor in quality , dirty or damaged, writing or rewriting errors may occur . Be careful to check the di sc for dirt or damage before you use it. ■ The actual nu mber of rewrites to CD-RW , DVD-RW , DVD+RW or DVD-RAM is affected by the quality of the disc an d the way it is used. ■ There are[...]

Satellite R10 4-24 Operating Basi cs When writing or r e writing Please observe/consider th e following when you write or rewrite to a CD-R/ RW , DVD-R/-RW/-RAM or DVD+R/+R W disc. ■ Do not perform any of th e following actions when writing or rewriting: ■ Change users in the Windows XP operating sy stem. ■ Operate the computer for any other [...]

Satellite R10 4-25 Operating Basi cs ■ Y ou cannot back up a CD-ROM or CD-R/RW to DV D-R/-RW or D VD+R/ +RW using the “Exact Copy” function of Recor dNow!. ■ Y o u cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/ +RW to CD-R/R W using the “Exact Copy” function of RecordNow!. ■ Re c ord N ow ! c a nn o t re c ord i n p ac k et [...]

Satellite R10 4-26 Operating Basi cs DLA for TOSHIBA Note the following limitations when you use DL A: ■ This software suppor ts only r ewrit able discs (DVD+R W , DVD-RW , and CD-RW). It does not support DVD+R, DVD-R, and CD- R discs that are not rewritable. ■ DLA does not support for matting a DV D-RAM disc and writing to it. They are perform[...]

Satellite R10 4-27 Operating Basi cs How to make a DVD-Video Simplified steps for making a DVD-Vide o from video data captured fr om a DV -Camcorder: 1. Click [start]-[All Programs] - [Inter Video WinDVD Creator2] - [InterV ideo WinDVD Creator] to launch WinDVD Creator . 2. Click [Capture] button then capture the video data fr om the DV - Camcorder[...]

Satellite R10 4-28 Operating Basi cs ■ While recor ding video to DVD or tape, please close all other programs. ■ Do not run software like a screen saver because it can put a heavy load on the CPU. ■ Do not run communication applications like a modem or a LAN. 2. Before r ecording the video to DVD ■ Wh e n y o u re co rd to D VD d is c , p l[...]

Satellite R10 4-29 Operating Basi cs Media care This section provides tips on pr otecti ng data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and pr otect the data stored on them: CD/DV Ds 1. Stor e your CD/DVDs in the con tainer they came in to protec[...]

Satellite R10 4-30 Operating Basi cs Sound System Using the microphone Y our computer has two built-in microp hones that can be used to r ecord monaural sounds into your applications. They can also be used to issue voice commands to applications that support such functions. Since your computer has built-in micr ophones and speakers, “howling” m[...]

Satellite R10 4-31 Operating Basi cs If you want to a more ef fect for the power management, you can select another mode, the High Power Savings which can save the power than the Normal Power Savings. T o sele ct it, follow the steps below . 1. Click the Power Management tab. 2. Select the High Power Savings in the Power Mode pull-down list. 3. Inp[...]

Satellite R10 4-32 Operating Basi cs Region selection T e lecommunication regulations vary from one r egi on to another , so you will need to make sure the internal modem’ s settings are correct for the region in which it will be u sed. T o select a region, follow the steps be low . 1. Click start , point to All Programs , point to TOSHIBA , poin[...]

Satellite R10 4-33 Operating Basi cs Open dialog box, if the mode m and T elephony Current Location region code do not match. A warning dialog box is displayed if current settings for r egion code and telephony location are incorr ect. Modem Selection If the computer cannot recognize the inter nal modem, a dialog box is displayed. Select the COM po[...]

Satellite R10 4-34 Operating Basi cs Disconnecting T o disconnect the inter nal modu lar cable, follow the steps below . 1. Pinch the lever on the connector in the telephone jack and pu ll out the connector . 2. Disconnect the cable from the co mputer’ s modem jack in the same manner . W ireless communications The computer’ s wireless communi c[...]

Satellite R10 4-35 Operating Basi cs Wir eless communication switch Y ou can enable or disable Wireless LAN func tion, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch to the right to tur n it on and to the left to tur n it off. Wir eless communication Indicator The wireless communication indica[...]

Satellite R10 4-36 Operating Basi cs LAN cable types If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be sure to connect with a CA T5 cable or higher . Y ou can not use a CA T3 cable. If you are using Ethernet LAN (10 megabits pe r second, 10BASE-T), you can connect with a CA T3 or higher . Connecting LAN cable T o con nect[...]

Satellite R10 4-37 Operating Basi cs Disconnecting LAN cable T o disconnect the LAN cable, follow the s t eps below . 1. Pinch the lever on the connector in the computer’ s LAN jack and pull out the connector . 2. Disconnect the ca ble from the LAN hub in the same manner . Check with your LAN administrator before disconnecting from the hub. Clean[...]

Satellite R10 4-38 Operating Basi cs Using the Hard Disk Drive (HDD) Protection There is a function for reducing the ri sk of damage on HDD in this computer . Using the acceleration sensor built in the c omputer , HDD Protection detects vibration, shocks and similar signs in the computer , and au tomatically moves the HDD head to a safe posi tion i[...]

Satellite R10 4-39 Operating Basi cs TOSHIBA HDD Protection Properties Y ou can make the HDD Pr otection se ttings by using the TOSHIBA HDD Protection Pr operties window . T o open the window , click start poi nt to All Programs point to TOSHIBA point to Utilities and c lick HDD Protection Setting . The window can also be started fr om the icon on [...]

Satellite R10 4-40 Operating Basi cs Different detection levels can be set depending on whethe r the computer is used as handheld or mobile usages, or whethe r it is used in a stable environment such as on a table in the workplac e or at home. By setting differ ent detection levels for the computer depending on whet her it runs with the AC power (d[...]

Satellite R10 4-41 Operating Basi cs Heat dispersal T o protect from over heating, the CPU ha s an inter nal temperature sensor . If the computer’ s inter nal tempe rature rises to a certain level, the coolin g fan is tur ned on or the processing speed is lowe red. Y ou can select whether to control the CPU temperature by turning on the fan first[...]

User’ s Manual 5-1 Satellite R10 Chapter 5 The Keyboar d The computer’ s keyboard layouts ar e compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the compute r . The number of keys on your keyboard depends on which country/region’ s keyboard layout [...]

Satellite R10 5-2 The Keyboar d Function keys: F1 … F12 The function keys (not to be confused with Fn ) are the 12 keys at the top of your keyboard. These keys functi on differ ently from other keys. F1 through F12 are called function keys because they execut e programmed functions when pressed. Used in combination with the Fn key , keys marked w[...]

Satellite R10 5-3 The Keyboar d Press Fn + F10 or Fn + F11 to access the inte grated keypad. When activated, the keys with gray markings on the bottom ed ge become numeric keypad keys ( Fn + F11 ) or cursor control keys ( Fn + F10 ). Refer to the Keypad overlay section in this chapter for more information on h ow to operate these keys. The power on[...]

Satellite R10 5-4 The Keyboar d Instant security: Press Fn + F1 to blank the scr een to prevent others from accessing your data . T o restor e the sc reen and original settings, pr ess any key or press the T ouch Pad. If a screen saver passwor d is register ed, a dialog box will appear . Enter the screensaver passwor d and click OK . I f no passwor[...]

Satellite R10 5-5 The Keyboar d Display selection: Pr ess Fn + F5 to change the active display device. When you press these hot keys, a dialog box appears. Only select able devices will be displayed. Hold down Fn and press F5 again to change the de vice. Wh en you release Fn and F5 , the selected device w ill change. If you hold down these hot keys[...]

Satellite R10 5-6 The Keyboar d LCD scr een reso lution selection: Pr ess Fn + Space keys to ch ange the display resolution. Each time when yo u pr ess these hot keys, the LCD screen resolution changes as follows: The av ailable resolution depends on the model. With XGA, you can change the resolution between 800 × 600 and 1024 × 768 pixe ls. Opti[...]

Satellite R10 5-7 The Keyboar d W indows special keys The keyboard pr ovides two keys that ha ve special functio ns in Windows: Windows logo key activates the start menu and t he other , the application key , has the same function as the secondary mouse button. This key activates the Windows start menu. This key has the same function as the seconda[...]

Satellite R10 5-8 The Keyboar d The numeric keypad overlay T emporarily using normal keyboard (overlay on) While using the overlay , you can tempora rily access the normal keyboar d without turn ing off the overlay: 1. Hold Fn and press any other key . All keys will operate as if the overlay was of f. 2. T ype upper -case characters by holding Fn +[...]

Satellite R10 5-9 The Keyboar d Generating ASCII characters Not all ASCII characters ca n be genera ted using normal keyboard operation. But, you can gene rate these char acters using their ASCII codes. With the overlay on: 1. Hold down Alt . 2. Using the overlay keys, type the ASCII code. 3. Release Alt , and the ASCII character appe ars on the di[...]

User’ s Manual 6-1 Satellite R10 Chapter 6 Power and Power -Up Modes The computer’ s power resour ces include the AC adaptor , battery pack and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power , and power up modes. Power co[...]

Satellite R10 6-2 Power and Power -Up Modes Power conditions continued Power on Power of f (no operation) AC adaptor not connected Main battery charge is above low battery trigger point • Operates • LED: Battery of f DC IN off Main battery char ge is below low battery trigger point • Operates • LED: Battery flashes oran ge DC IN off Main ba[...]

Satellite R10 6-3 Power and Power -Up Modes Power indicators As shown in the above table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer’ s operating capability and battery charge status. Battery indicators Check the Battery indicator to determine the status of t he battery pa ck. The following indicato[...]

Satellite R10 6-4 Power and Power -Up Modes Power indicator Check the Power indicator to determi ne the power status: Battery types The computer has two types of batteries: ■ Battery pack ■ Real Time Clock (RTC) battery Battery pack When the AC adaptor is not connecte d, the computer’ s main power source is a removable lithium ion battery pac[...]

Satellite R10 6-5 Power and Power -Up Modes T o en sure that the battery pack ma in tains its maximum ca pacity , operate the computer on battery power at least once a month until the battery pack is fully discharged. Refer to Extending battery life in this chapter for procedur es. If the computer is continuousl y operated on AC power through an AC[...]

Satellite R10 6-6 Power and Power -Up Modes Car e and use of the battery pack The battery pack is a vital component of portable computing. T aking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Fo llow the instructions in this section carefully to ensure safe oper ation and [...]

Satellite R10 6-7 Power and Power -Up Modes 8. Never expose the battery pack to ab normal shock, vibra tion or pressure . The battery pack’ s internal protective device will fail , causing it to overheat, explode, ignite or le ak caustic liquids possibly resulting in death or serious injury . 9. Never let a battery pack become wet. A wet batte ry[...]

Satellite R10 6-8 Power and Power -Up Modes 6. Be sure to monitor the remaining ba ttery power . If the battery pack and real time clock battery discharge co mpletely , Standby and Suspend will not function and data in memory w ill be lost. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to rech ar[...]

Satellite R10 6-9 Power and Power -Up Modes Ti m e The following table shows the appr oximate time requir ed to fully charge a discharged b attery . Charging time (hours) Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extr emely hot or cold. If the battery is extremely h ot, it might[...]

Satellite R10 6-10 Power and Power -Up Modes Monitoring battery capacity Remaining battery power can be mo nitored in TOSHIBA Power Saver . Maximizing battery operating time A battery’ s usefulness depends on how lo ng it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ How you configure the computer (fo[...]

Satellite R10 6-11 Power and Power -Up Modes ■ The condition of the battery termi nal s. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Retaining data with power off When you tur n off your computer with fully charged batte ri es, the batteries retain data for the following app[...]

Satellite R10 6-12 Power and Power -Up Modes Replacing the battery pack When the battery pack reaches the end of its operating li fe you will need t o install a new one. Battery pack is the expendables. Life runs out by doing repetition char ge. If the Battery indicator flashes orange shortly after fully rech ar ging the battery , the battery pack [...]

Satellite R10 6-13 Power and Power -Up Modes 6. Slide the battery release latch ( ➀ ) to free the battery pack for r emoval ( ➁ ), then slide out the battery pack. Releasing the battery pack (2) 7. Return your computer to the upright position. Installing the battery pack T o inst all a battery pack, follow the steps below . 1. T ur n the comput[...]

Satellite R10 6-14 Power and Power -Up Modes TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of passwor d security: User and Supervisor . User password T o start th e utility , point to or click the following items: start -> All Programs -> TOSHIB A -> Ut ilities ->Passwor d Utility The user password d i alog b[...]

Satellite R10 6-15 Power and Power -Up Modes User T oken field ■ Create (button) Y ou can use an SD card token, instead of entering the password. After you have register ed a password, insert an SD card in SD card slot an d click Create . Y ou can use an SD card of any capacity , but it must be formatted correctly . If an unformatted card or one [...]

Satellite R10 6-16 Power and Power -Up Modes Starting the computer by passw ord If you registered a passwor d, there are two ways to start the computer: ■ I n s e r t a n S D c a r d t o k e n b e f o r e y o u tur n on the computer . The computer will start normally , without displaying a password prompt. ■ Enter the password manually . T o en[...]

Satellite R10 6-17 Power and Power -Up Modes Power - up modes The computer has the following power -up modes: ■ Boot: Computer shuts down without sa ving data. Always save your work before you turn the compute r off in boot mode. ■ Hibernation: Data in memory is saved to the hard disk. ■ Standby: Data is maintained in the computer’ s memory[...]

User’ s Manual 7-1 Satellite R10 Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer . TOSHIBA HW Setup lets you configure settings for General, Display , Boot Priority , Keyboard, CPU, LAN, Device Confi g Parallel/Printer , USB and Button Setting. Accessing HW Setup T o run HW Set up, click sta[...]

Satellite R10 7-2 HW Setup General This window displays the BIOS version and contai ns two buttons: Default and About . Setup This field displays BIOS Version and date. Display This tab lets you customize your compu ter’ s display settings for either the inter nal LCD screen or an external monitor . Power On Display Lets you use the display to be[...]

Satellite R10 7-3 HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer . Select from the following settings: Y ou can override the se ttings and manually select a boot device by pressing one of the following keys while the computer is booting: * 1 FDD is looked for when the boot disk is conta ined in e[...]

Satellite R10 7-4 HW Setup T o change the boot drive, follow the steps below . 1. Hold down F12 and boot the computer . 2. The following menu will be displaye d wit h the following icons: Built-in HDD, 2nd HDD, CD-ROM, FDD (or SD memory card), Network (LAN) boot. 3. Use the left/right cursor keys to high light the boot device you want an d press En[...]

Satellite R10 7-5 HW Setup HDD Priority Options If more than one HDD is installed in the computer , this option lets you set the priority for HDD detection. If the first detected HDD has a boot command, the system will boot fr om the HDD. Network Boot Protoc ol This feature sets the pr otocol to remotely boot fr om the network. [PXE] Sets PXE as th[...]

Satellite R10 7-6 HW Setup LAN Wak e -u p o n L A N This feature lets the computer’ s power be tur ned on when it receives a wake- up signal from the LAN. Built-in LAN This feature enables or disables the Bu ilt-in LAN. Device Config Device Configuration This option lets you set the device configuration. Parallel/Printer Some models are equipped [...]

Satellite R10 7-7 HW Setup Parallel Port Mode The options in this tab are ECP and Standard Bi-directional . USB USB KB/Mouse Legacy Emulation Use this option to enable or disabl e USB KB/Mouse Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setti ng the USB KB/Mouse Legacy Emulation ite[...]

User’ s Manual 7-1 Satellite R10 Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer . TOSHIBA HW Setup lets you configure settings for General, Display , Boot Priority , Keyboard, CPU, LAN, Device Confi g Parallel/Printer , USB and Button Setting. Accessing HW Setup T o run HW Set up, click sta[...]

Satellite R10 7-2 HW Setup General This window displays the BIOS version and contai ns two buttons: Default and About . Setup This field displays BIOS Version and date. Display This tab lets you customize your compu ter’ s display settings for either the inter nal LCD screen or an external monitor . Power On Display Lets you use the display to be[...]

Satellite R10 7-3 HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer . Select from the following settings: Y ou can override the se ttings and manually select a boot device by pressing one of the following keys while the computer is booting: * 1 FDD is looked for when the boot disk is conta ined in e[...]

Satellite R10 7-4 HW Setup T o change the boot drive, follow the steps below . 1. Hold down F12 and boot the computer . 2. The following menu will be displaye d wit h the following icons: Built-in HDD, 2nd HDD, CD-ROM, FDD (or SD memory card), Network (LAN) boot. 3. Use the left/right cursor keys to high light the boot device you want an d press En[...]

Satellite R10 7-5 HW Setup HDD Priority Options If more than one HDD is installed in the computer , this option lets you set the priority for HDD detection. If the first detected HDD has a boot command, the system will boot fr om the HDD. Network Boot Protocol This feature sets the pr otocol to remotely boot fr om the network. [PXE] Sets PXE as the[...]

Satellite R10 7-6 HW Setup LAN Wak e -u p o n L A N This feature lets the computer’ s power be tur ned on when it receives a wake- up signal from the LAN. Built-in LAN This feature enables or disables the Bu ilt-in LAN. Device Config Device Configuration This option lets you set the device configuration. Parallel/Printer Some models are equipped [...]

Satellite R10 7-7 HW Setup Parallel Port Mode The options in this tab are ECP and Standard Bi-directional . USB USB KB/Mouse Legacy Emulation Use this option to enable or disabl e USB KB/Mouse Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setti ng the USB KB/Mouse Legacy Emulation ite[...]

User’ s Manual 8-1 Satellite R10 Chapter 8 Optional Devices Optional devices can expand the comput er’ s capabilities and it s versatility . This chapter describes connect ion or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memor y ■ PC card ■ SD card ■ Memory expansion Power devices ■ Batte[...]

Satellite R10 8-2 Optional Dev ices PC card The computer is equipped with a PC card slot that can accommoda te a T ype II card. Any PC card that meet s industry standar ds (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’ s multif unction card and Car dB us PC cards. CardBus suppo[...]

Satellite R10 8-3 Optional Dev ices 5. Grasp the PC card and draw it out. Removing the PC card SD card The computer is equipped with an SD card slot that c an accommodate Secure Digital flash memory car ds wi th various memory capacities. SD cards let you easily transfer data fro m devices, such as di gital cameras and Personal Digital Assist ants,[...]

Satellite R10 8-4 Optional Dev ices Inserting an SD car d T o insert an SD card, follow the steps below . 1. Insert an SD card in the SD card slot. 2. Press gently to ensure a firm connection. Inserting an SD card Removing an SD car d T o rem o ve a n S D c a rd, follow the steps below . 1. Open the Safely Remove Hardwar e icon on the T ask Bar . 2[...]

Satellite R10 8-5 Optional Dev ices SD card care 1. Do not write to an SD card if the battery po wer is low . Low power could affec t writing accuracy . 2. Do not r e move an SD car d while read/write is in pr ogress. 3. The SD card is designed so that it can be inserted only one way . Do not try to force the SD card into the SD car d slot. 4. Do n[...]

Satellite R10 8-6 Optional Dev ices If you install a memory module that is not compatible with the computer , beep will sound when you turn on the power . If the memory module is installed in slot A, there will be a long beep (1 second) fol lowed by two short beeps (0.5 second each). If the memory module is in slot B, there will be a long beep foll[...]

Satellite R10 8-7 Optional Dev ices 5. Slide your f ingernail or a thin object under the cove r and lift it off. Removing the mem ory module cover 6. Fit the memory module’ s connectors into the socket at about a 45 degree angle and push the module down unti l latches on either side snap into place. Align the notch of the memory module with that [...]

Satellite R10 8-8 Optional Dev ices 7. Seat the memory module cover and secur e it with one screw . Seating the me mory module cover 8. Install the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power -Up Modes, for details. 9. Return your computer to the upright position. 10. T ur n the computer power on and make[...]

Satellite R10 8-9 Optional Dev ices 7. Grasp the module by the sides and pull it out. Removing the memory module 8. Seat the memory module cover and secur e it with one screw . 9. Install the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power -Up Modes, for details. 10. Return your computer to the upright positi[...]

Satellite R10 8-10 Optional Dev ices Slim Select Bay HDD Adaptor Y ou can increase your computer’ s data storage capacit y by installing an additional 40.0 bil lion bytes (37.26 GB), 60.0 billion bytes (55.89 GB), 80.0 billion bytes (74.53 GB) and 100.0 billion bytes (93.16 GB) hard disk drive in the Slim Select Bay . T o install an HDD in t he S[...]

Satellite R10 8-11 Optional Dev ices 3. Close the lid and slide the lock to the lock position. Closing the lid For details on inserting the Slim Select Bay HDD adaptor in the computer’ s Slim Select Bay slot, refer to Chapter 4, Oper ating Basics . USB FDD Kit The USB floppy disk drive mo dule ca n be connected to a USB port. For details on conne[...]

Satellite R10 8-12 Optional Dev ices 2. Connect the monitor cable to the external monitor port. Connecting the moni tor cable to the external mon itor port 3. T ur n the monitor’ s power on. 4. T ur n the computer’ s power on. When you turn on the power , the co mputer automatically recognizes the monitor and determines whether it is color or m[...]

Satellite R10 8-13 Optional Dev ices 2. Connect the TV adaptor cable’ s S-Vi deo plug to the Video-out jack on the TV . Press the hot k eys Fn + F5 to change the display device. If a television i s connected t o the computer , set the TV type in Display Properties. Follow the steps below . ■ TV single 1. Click start and cl ick Control Pa nel . [...]

Satellite R10 8-14 Optional Dev ices Changing the resolution If you want to cha nge the re solut ion, follow the steps below . 1. Open Display properties and select the Settings tab. 2. Select Advanced . 3. Select the Adapter tab, then select List all modes . 4. Select a resolution from the menu. i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high[...]

Satellite R10 8-15 Optional Dev ices Connecting 1. Make sure the connectors are pr operly al igned and plug the i.LINK (IEEE1394) cable into the computer . Connecting the i.LINK(IEEE1394) cab le into the computer 2. Plug the other e nd of the cable into the devic e. Note the following when you use i.L INK: ■ Y ou may need to install drivers for y[...]

Satellite R10 8-16 Optional Dev ices Advanced Port Replicator IIl In addition to the ports available on the computer , the Advanced Port Replicator lll provides Parallel port. The Advanced Port Replicator connects directly to the docking interface on the underside of the computer . The AC adaptor connects the Advanced Port Re plicator to a power so[...]

Satellite R10 8-17 Optional Dev ices Parallel printer Y ou can connect any standar d Centroni cs -compatible parallel printer to your computer . All you need is an IBM PC™ parallel printer cabl e. Y our dealer can supply one or you can purchase one at most computer stores. The cable’ s connectors are de signed so that it is impossible for you t[...]

Satellite R10 8-18 Optional Dev ices Security lock Security locks enable you to a nchor your computer and op tional Advanced Port Replicator III to a desk or other heavy object to help prevent unauthorized removal of the computer or Advanced Port Replicator III. The computer h as a security lock slot on the left side. Attach one end of a cable to a[...]

User’ s Manual 9-1 Satellite R10 Chapter 9 T r oubleshooting TOSHIBA designed the computer for dura bility . H owever , should problems occur , f ollowing the procedures in this chapter can help to determine t he cause. All readers should become familiar with this chapter . Knowing what might go wrong can help prevent problems fr om occurring. Pr[...]

Satellite R10 9-2 T roubleshooting Prel iminary checklist Consider the simplest solution first. The items in this checklist ar e easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripher al devices befor e you turn on the computer . This incl udes your printer and any other extern al device you are u[...]

Satellite R10 9-3 T roubleshooting Ha rd w a re an d s y s te m c h e c k li s t This section discusses pr oblems caused by your computer’ s hardware or attached peripherals. Ba sic problems may occur in the following areas: System start-up When the computer does not start properly , check the following items: ■ Self T est ■ Power Sources ■[...]

Satellite R10 9-4 T roubleshooting If the self test is success ful, the compu ter tries to load the ope rating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except [...]

Satellite R10 9-5 T roubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator . Refer to Chapter 6, Power and Power -Up Modes for more information. Batter y If you suspect a problem with the battery , check the DC IN indicator as well as the Battery indicator . For informa tion on i[...]

Satellite R10 9-6 T roubleshooting Real Time Clock Password If the indicator still does not glow , the battery may be at the end of its operating life. Re place it. If you do not think the battery is at the end of its operating life, see your dealer . Battery doesn’t power the computer as long as expected If you frequently rechar ge a partia lly [...]

Satellite R10 9-7 T roubleshooting Keyboard Keyboard pr oblems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard . Internal LCD display panel Apparent LCD pr oblems may be relate d to the computer’ s setup. Refer to Chapter 7, HW Setup , for more information. Problem Pr ocedure Some letter keys produ[...]

Satellite R10 9-8 T roubleshooting Hard disk drive DVD-RO M drive For more information, r e fer to Chapter 4, Operating Basics Problem Pr ocedure Computer does not boot from har d disk drive Check if a floppy disk is in the floppy disk dr ive or a CD-ROM is in the opti cal media drive. Remove any floppy disk and/or CD-ROM and check B oot priority .[...]

Satellite R10 9-9 T roubleshooting DVD-ROM& CD-R/RW dri ve For more information, r e fer to Chapter 4, Operating Basics . Some CD/DVDs run correctly , but others do not The software or har dware configuration may be causing a problem. Make sure the hardware configuration matches your softwar e’ s needs. Check the CD/D VD’ s documentati on. [...]

Satellite R10 9-10 T roubleshooting Some CD/DVDs run correctly , but others do not The software or hardwar e confi guration may be ca us i ng a pro b le m. M ak e su re th e ha rdw a re configuration matches your software’ s needs. Check the CD/DVD’ s documentation. Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, D[...]

Satellite R10 9-11 T roubleshooting DVD Super Multi dri ve For more information, r e fer to Chapter 4, Operating Basics . Problem Pr ocedure Y ou cannot access a CD/DVD in the drive Make sure the drive’ s disc tray is securely closed. Press gently until it clicks into place. Check whether the drive po wer is on. If the power is off, click on the [...]

Satellite R10 9-12 T roubleshooting USB floppy disk drive (op tional) For more information, r e fer to Chapter 4, Operating Basics . SD car d Refer also to Ch apter 8, Optional Device s . PC car d Refer also to Ch apter 8, Optional Device s . Problem Pr ocedure Drive does not operat e T here may be a faulty cable connection. Check the connection to[...]

Satellite R10 9-13 T roubleshooting Pointing Device If you are using a USB mouse, also refer to the USB section in this chapt er and to your mou se documen tation. TOSHIBA T ablet PC Pen Problem Pr ocedure On-screen pointer does not respond to Ta b l e t P C P e n operation The system might be busy . If the pointer is shaped as an hour glass, wait [...]

Satellite R10 9-14 T roubleshooting To u c h P a d Problem Pr ocedure On-screen pointer does not respond to Pad operatio n The system might be busy . If the pointer is shaped as an hourglass, wait fo r it to standby its normal shape and try again to move it. Double-tapping does not work T ry changin g the double-c lick speed setting in the mouse co[...]

Satellite R10 9-15 T roubleshooting USB mouse USB Refer also to your USB device’ s documentation. Problem Pr ocedure On-screen pointer does not respond to mouse operat ion The system might be busy . If the pointer is shaped as an hour glass, wait for it to res ume its normal shape and try again to move it. Make sure the mouse is pr operly connect[...]

Satellite R10 9-16 T roubleshooting Memory expansion Refer also to Ch apter 8, Optional Device s , for information on install ing memory modules. Sound Syste m Refer also to documentatio n for your audio de vices. Problem Pr ocedure Beep sounds. (T wo beeps, a dash and a dot, for a defective memory module in slot A. Three bee ps, a dash and two dot[...]

Satellite R10 9-17 T roubleshooting External monitor Refer also to Chapter 8, Opti onal Devices , and to your monitor’ s documentation. i.LINK (IEEE1394) Modem Probl em Procedur e Monitor does not turn on Make sure that the external monitor’ s power switch is on. Confirm that the external monitor’ s power cable is plugged into a working power[...]

Satellite R10 9-18 T roubleshooting LAN Y ou place a call, b ut a connection ca n’t be made Make sure the settings ar e correct in your communications application. After making a call you can’t he ar a ring Make sure the tone or pulse selection in your communications application is set correctly . Y ou can also use th e A TD comm and. Communica[...]

Satellite R10 9-19 T roubleshooting Wir eless LAN If the following proced ures do not restore LAN access, consult your LAN administrator . For more information on wir e less communication, refer to Chapter 4, Operating Basics . Printer Refer also t o the Parallel printer sections in Chap ter 8, Optional Devices , and to the troubles hooting and oth[...]

Satellite R10 9-20 T roubleshooting TOSHIBA support If you require any additional help using your computer or if you ar e having problems operating the computer , you may need to contact TOSHIBA for additional technic al assistance. Before y ou call Some problems you experience may be re lated to softwar e or the operating system, it is important t[...]

User’ s Manual A-1 Satellite R10 Appendix A Specifications This appendix summarizes the compu ter’ s technical specifications. Physical Dimensions Envir onmental Requirem ents W eight (typical) ■ 2.8 kilograms, configured with: 14.1”XGA, 512MB RAM, 40GB HDD, DVD-R OM drive, modem, LAN (100M Bit). ■ 2.9 kilograms, configured with: 14.1”X[...]

Satellite R10 A-2 Specifications Power Requirements Built-in Mod em Conditions Altitude (fr om sea level) Operating -60 to 3,000 meters Non-operating -60 to 10,000 meters maximum AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 15 VDC 4 amperes Network control unit (NCU) T ype of NCU AA T ype of line T elephone line (analog o[...]

Satellite R10 A-3 Specifications Communication prot ocol Data ITU-T -Rec V .21/V .22/V .22bis/V .32 (Former CCITT) /V .32bis/V .34/V .90 Bell 103/212A Fax ITU-T -Rec V .17/V .29 /V .27ter (Former CCITT) /V .21 ch2 Communication speed Data transmission and reception 300/1200/2400/4800/7 200/9600/12000/14400/ 16800/19200/21600/2 4000/26400/28800/ 312[...]

User’ s Manual B-1 Satellite R10 Appendix B Display Contr oller and Modes Display contro ller The display controller interpr ets software commands into har dware commands that turn partic ular pels on or off. The display contr oller supports VGA, SV GA and XGA modes at internal LCD display panel. A high-r esolution external monitor connected to t[...]

Satellite R10 B-2 Display Contr oller and Modes T able1 Video modes (VGA) Vid eo mode T ype Resolution Character matrix (pels) LCD colors CRT colors Scanning frequency V ertical ( H z ) 0, 1 VGA Te x t 40 × 25 Characters 8 × 8 1 6 of 256K 16 of 256K 70 2, 3 VGA Te x t 80 × 25 Characters 8 × 8 1 6 of 256K 16 of 256K 70 0*, 1* VGA Te x t 40 × 25[...]

Satellite R10 B-3 Display Contr oller and Modes T able1 Video modes (VGA) continued Vid e o mode Ty p e Resolution Character matrix (pels) LCD colors CRT colors Scanning frequen cy V ertical (Hz) D VGA Grph 320 × 200 Pels 8 × 8 16 of 256K 1 6 of 256K 70 E VGA Grph 640 × 200 Pels 8 × 8 16 of 256K 1 6 of 256K 70 F VGA Grph 640 × 350 Pels 8 × 14[...]

Satellite R10 B-4 Display Contr oller and Modes T able 2 Video modes * Resolution is support of only CR T 10 24 × 768 or more. Only External Monitor can perform ch ange of V ertical fr equency (Hz). Resolution LCD colors CRT colors V ertical frequency (Hz)* 640 × 480 256/256K 256/256K 60 75 85 100 800 × 600 256/256K 256/256K 60 75 85 100 1024 ×[...]

Satellite R10 B-5 Display Contr oller and Modes T able 2 Video modes continued * Resolution is support of only CR T 10 24 × 768 or more. Only External Monitor can perform ch ange of V ertical fr equency (Hz). Resolution LCD colors CRT colors V ertical frequency (Hz)* 640 × 480 64K/64K 64K/64K 60 75 85 100 800 × 600 64K/64K 64K/64K 60 75 85 100 1[...]

Satellite R10 B-6 Display Contr oller and Modes T able 2 Video modes continued * Resolution is support of only CR T 10 24 × 768 or more. Only External Monitor can perform ch ange of V ertical fr equency (Hz). Resolution LCD colors CRT colors V ertical frequency (Hz)* 640 × 480 16M/16M 16M/16M 60 75 85 100 800 × 600 16M/16M 16M/16M 60 75 85 100 1[...]

Satellite R10 B-7 Display Contr oller and Modes Display settings 1. Y ou cannot move from the [Settings] t ab of [Display Properties] to the multi-monitor when you are using the display of the computer and an external CRT display or a TV at the same time. *The [Settings] tab is displayed in the following steps; 1) Open [Control Panel], click [Appea[...]

Satellite R10 B-8 Display Contr oller and Modes 3) Select either Monitor (CRT display) or T elevisi on, then select Apply button, because the Primary Device is fixed into Notebook (the display of the comp uter). Intel(R) 82852/82855 GM/GME G rap hics Controller Prope...(1) 2. Some repr oduced DVD picture may not be displayed when the display of the[...]

User’ s Manual C-1 Satellite R10 Appendix C W ireless LAN Card Specifications Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary accor ding to: ■ Country/region wher e th e product was pur chased ■ T ype of product Wireless communication is of ten subject to local radio regulations. Although Wireless LAN wir eless netw[...]

Satellite R10 C-2 Wireless LAN The range of the wir eless signal is relate d to the transmit rate of the wireless communication. Communications at lowe r transmit range may travel l arger distances. ■ The range of your wireless devices can be af fected when the antennas are placed near metal surfaces and solid high-density materials. ■ Range is[...]

Satellite R10 C-3 Wireless LAN *1 Factory-set default chan nels *2 Refer to the shee t Approved Countries/Regions for use for the countries/ regions that in which these channels can be used. When installing Wireless LAN cards, the channel configurati on is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, t[...]

Satellite R10 C-4 Wireless LAN *2 Refer to the sheet “Approved Countries/Regions for use” for the countries/regions that in which these channel s can be used. 108 5540 112 5560 116 5580 120 5600 124 5620 128 5640 132 5660 136 5680 140 5700 149 5745 153 5765 157 5785 161 5805 165 5825[...]

User’ s Manual D-1 Satellite R10 Appendix D AC Power Cor d and Connectors The power cord’ s AC input plug must be compatible with the various internationa l AC power ou tlets and th e cord must meet the standards for the country/region in which it is used. All cords must meet the f ollowing specifications: Certification agencies Length: Minimum[...]

Satellite R10 D-2 AC Power Cord and Connectors In Europe, two conductors power cor d must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F . For the United States and Canada, two pin plug configu ration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6- 15P (250V) or 5[...]

User’ s Manual E-1 Satellite R10 Appendix E If your computer is stolen Should your computer be stolen , however , we’ll help you try to find it. Before contacting TOSHIBA, please pr epar e the following information wh ich is necessary to uniquely identify your computer: ■ In which country was your computer stolen? ■ What type of mach ine do[...]

Satellite R10 E-2 If your computer is stolen TOSHIBA The ft Regis tration Send to: TOSHIBA Euro pe GmbH T e chnical Service and Support Leibnizstr . 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Owner’s details Country stolen: Machine type: (e.g. TOSHIBA Pocket PC e350) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) [...]

User’ s Manual Glossary-1 Satellite R10 Glossary The terms in this glossary cover topic s related to this man ual. Alternate naming is included for r eference. Abbreviat ions AC: alternating current AGP: accelerated graphics port ANSI: American Nationa l Standards Institute APM: advanced power manager ASCII: American Standard Code for Info rmatio[...]

Satellite R10 Glossary -2 Glossary MB: megabyte MS-DOS: Micros oft Disk Operating System OCR: optical char acter recognition (reader) PCB: printed circuit board PCI: peripheral compon ent interconnect RAM: random access memory RGB: red, gr een, and blue ROM: read only memory RTC : real time clock SCSI: small computer system interface SIO: serial in[...]

Satellite R10 Glossary -3 Glossary application: A group of pr ograms that togeth er are used for a specific task such as accounting, financial planni ng, spreadsheets, wor d processing and games. ASCII: American Standard Code for I nformation Inter change. ASCII code is a set of 256 binary codes that represent the most commonly used letters, number[...]

Satellite R10 Glossary -4 Glossary C cache memory: High speed memory which stores data that incr eases processor speed and data transfer rate. When the CPU reads data from main memory , it stor es a copy of this data in cache memory . The next time the CPU needs tha t same data, it looks for it in the cache memory rather than the ma in memory , whi[...]

Satellite R10 Glossary -5 Glossary components: Elements or parts (of a system) whic h make up the whole (system). computer program : A set of instructions wri tten for a computer that e nable it to achieve a desired result. computer system: A combination of har dware, softwar e, firmwar e, and peripheral components assembled to process data into us[...]

Satellite R10 Glossary -6 Glossary dialog box: A window that accepts user inpu t to make system settings or record other information. disk drive: The de vice that ra ndomly acce sses information on a disk and copies it to the computer’ s memory . It also writes data from memory to the disk. T o accomplish these tasks, the unit physically rotates [...]

Satellite R10 Glossary -7 Glossary escape: 1) A code (ASCII code 27), signaling the computer th at what follows are commands; used with peripher al devices such as printers and modems. 2) A means of ab orting the task curr ently in progress. escape guard tim e: A time before and after an es cape code is sent to the modem which distinguishes between[...]

Satellite R10 Glossary -8 Glossary hardwar e: The physical electronic and mechanical components of a computer system: typically , the comput er itself, external disk drives, etc. See also softwar e and firmware. hertz: A unit of wave fr equency that eq uals one cycle per second. hexadecimal: The base 16 numbering system composed of the digits 0 thr[...]

Satellite R10 Glossary -9 Glossary J jumper: A small clip or wire that allows you to change the hardwar e characteristics by elec trically connecting two points of a cir cuit. K K: T aken from the Greek wor d kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power . See also byte and kilobyte. KB: See kilobyte. keyboard:[...]

Satellite R10 Glossary -10 Glossary mode: A method of operation, for exa mple, the boot mode, standby mode or the hibernation mode. modem: Derived from modulator/demodula tor , a device that con verts (modulates) digital data for transm ission over telephone lines and then converts modulated data (dem odulates) to digital format where received. mon[...]

Satellite R10 Glossary -11 Glossary P parallel interface: Refers to a type of inf ormation exchange that transmits information one byte (8 bits) at a time. See also serial interface. parity: 1) The symmetrical relationsh ip between two parameter values (integers) both of which are either on or of f; odd or even; 0 or 1. 2) In seria l communicat ion[...]

Satellite R10 Glossary -12 Glossary res t a rt : Resetting a computer without turn ing it off (also called “warm boot” or “soft re set”). See also boot. RGB: Red, green, and blue. A device that uses three input signals, each activating an el ectron gun for a primary additive color (red, gr een, and blue) or port for using such a device. See[...]

Satellite R10 Glossary -13 Glossary T Ta b l e t P C : A fully function al computer that runs Microsoft Windows XP T ablet PC Edition . With a T ablet PC, you can wr ite directly on the screen by using a T ablet PC Pen and use the pen to perform mouse functions. terminal: A typewriter -like keyboard and CRT display scr een connected to the computer[...]

User ’s Manual Index-1 Sa tellite R10 Inde x A AC adaptor, 1-3, 2-16 connecting, 3-5 DC IN 15V jack, 2-6 Advanced Port Replicator II I, 1-16, 8-16 ASCII characters, 5-9 B Battery charging, 6 -8 extending life, 6-11 indicator, 2-10, 6-3 location, 2-6 monitoring capacity, 6-10 real time clock, 1-3, 6-5 safety precautions, 6-6 save mode, 1-10 types,[...]

Satellite R10 Index-2 Index E Environment, 3-1 Equipment che cklist, 1-1 Equipment set up general conditions, 3-2 placement, 3-2 Ergonomics lighting, 3-3 seating and posture, 3-3 work habits, 3-4 F Floppy disk care, 4-29 Fn + Ctrl (enhanced keyboard simulation), 5-3 Fn + Enter, 5-3 Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-4 Fn + F10[...]

Satellite R10 Index-3 Index typewriter keys, 5-1 Windows special keys, 5-7 Keypad overlay, 1-9, 5-7 Arrow mode, 5-7 Numeric mode, 5-7 temporarily using norma l keyboard (over- lay on), 5-8 temporarily using overlay (overlay off), 5-8 turning on the overlay s, 5-7 L LAN, 1-7, 4-35 cable types, 4-36 connecting, 4-36 disconnecting, 4- 37 jack, 2-5 LAN[...]

Satellite R10 Index-4 Index parallel, 7-6, 8-17 Problems AC power, 9-5 Analyzing symptoms, 9 - 2 Battery, 9-5 DVD Multi drive, 9-11 DVD Super Multi drive, 9-11 DVD-ROM drive, 9-8 DVD-ROM&CD-R/RW drive, 9-9 External monitor, 9-17 Hard disk drive, 9-8 Hardware and system checklist, 9-3 i.LINK, 9-17 Internal LC D display pan - el, 9-7 Keyboard, 9-[...]

Satellite R10 Index-5 Index T TOSHIBA Application button, 1-9 TOSHIBA Assist, 1-13 TOSHIBA Controls, 1-12 TOSHIBA Mic Effect, 1-13 TOSHIBA Mobile Extension, 1-13 TOSHIBA PC Diagnostic Tool, 1-13 TOSHIBA Power Saver, 1-12 TOSHIBA SD Memory Boot Utility, 1-12 TOSHIBA Theft Registration, E-2 TOSHIBA Virtual Sound, 1-13 TOSHIBA Zooming Utility, 1-12 TV[...]