Toshiba Satellite A500/ Satellite Pro A500/ Satellite A500D/ Satellite Pro A500D series manuel d'utilisation

T OSHIBA Satellite A500/ Satellite Pro A500/ Satellite A500D/ Satellite Pro A500D series User's Manual[...]

User ’s Manual ii Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liabili ty is assumed, with respect to the use of the information contained herein. TOSHIBA Satellite A500/Satellite Pro A5 00/ Satelli[...]

User ’s Manual iii Manufactured under licens e from Dolby Lab oratories. Dolby and the dou ble-D symbol are tradema rks of Dolby Labora tories. Dolby Home Theater is a trademark of Dolb y Laboratories. ExpressCard is a trademark of PCMCIA HDMI, the HDMI logo and High-Definition Multimedia Interfa ce are trademarks or registered trade marks of HDM[...]

User ’s Manual iv FCC information FCC notice "Declaration of Conform ity Information" This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide rea sonable prot ection again st harmful interference in a residential install[...]

User ’s Manual v EU Conformity S t atement VCCI Class B Information Import ant Safety Information for Computers with TV tuner IEC60950-1/EN60950-1 Information tech nology equipment - Safety - Coaxial cable connection to this computer must only be used if the cable outer conductive shielding has been grounded by the cable in staller at the buildin[...]

User ’s Manual vi Canadian regulatory in formatio n (Canada only) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications. Note that Canadian De partment of Communications (DOC) regulations provide, that [...]

User ’s Manual vii Jap an regulations Region selectio n If you are using the computer in Ja pan, technical regulations described under T elecommunications Business La w require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial atte mpts can be made. If more th an two r[...]

User ’s Manual viii Pursuant to FCC CFR 47, Part 68: When you are ready to install or use the modem, call your local telephone company and give them the following information: ■ The telephone number of the line to which you will connect the modem ■ The registration number t hat is located on the device. US: AGSMD01BDELPHI S56MD01B13054 The FC[...]

User ’s Manual ix T ype of service Y our modem is desi gned to be used on standard-device telephon e lines. Connection to telep hone company-provided coin se rvice (central office implemented systems) is pr ohibited. Connection to pa rty lines service is subject to state tarif fs. If you have any que stions about your telephone li ne, such as how[...]

User ’s Manual x Instructions for IC CS -03 certified equipment 1. The Industry Canada label identi fies certified e quipment. This certification means that the equipment meets certain telecommunications network prot ective, operational and safety requirements as prescribed in the appropriate T erminal Equipment T echnical Requireme nts document [...]

User ’s Manual xi Notes for Users in Australia and New Zealand Modem w arning notice for Australia Modems connected to the Australian te lecoms network must have a valid Austel permit. This modem has been desi gned to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia. The use o[...]

User ’s Manual xii ■ Some parameters required fo r compliance with T eleco m’s P TC S pecifications are dep endent on th e equipment (PC) associated with this modem. The associated equipm en t shall be set to operate within the following limits for complianc e with T elecom S pecifications: a/ There shall be no more than 10 call attempts to t[...]

User ’s Manual xiii ■ The transmit level from this device is set at a fixe d level and because o f this there may be circumstances where the performance is less than optimal. Before rep orting such occurrences a s faults, please check the line with a standard T elepermitted telephone, and only report a fa ult if the phone performance is impaire[...]

User ’s Manual xiv Following information is only for EU-memb er states: Disposal of products Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol in dicates that products must be collected and disp osed of separately from household waste . Integrated batteries and accumulators can be di sposed of with the product. The[...]

User ’s Manual xv ENERGY ST AR ® Program Disposing of the com puter and the computer’s batte r ies ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government. ■ This computer contains rechargeable batteries. After repeated use, the batteries will finally lose th e[...]

User ’s Manual xvi LUOKAN 1 LASERLAI TE APP AREIL A LASER DE CLASSE1 KLASS 1 LASER APP ARA T Before it is shipped, the Class 1 Laser is certified to meet th e United S tates Chapter 21 S tandards of the De partment of Health and Human Se rvices (DHHS 21 CFR). For any other country , the drive is certified to meet the Class 1 Laser standards of IE[...]

User ’s Manual xvii HLDS G T20N/G T20F Pioneer DVR-TD09TBM/DVR-TD09TBF Location of the required label COMPLIES WITH FDA RADIA TION PERFORMANCE ST ANDARDS, 21 CFR SUBCHAPTER J. MANUF AC TURED Hitachi-LG Data Storage, Inc. 22-23, Kaigan 3-chome, Minato-Ku, T okyo, 108-0022 Japan Location of the required label COMPLIES WITHFDA RADIA TION PERFORMANCE[...]

User ’s Manual xviii T oshiba Samsung TS-L633A/TS-L633P Location of the required label PRODUCT IS CERTIFIED BY THE MANUF ACTURER TO COMPL Y WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE A T THE DA TE OF MANUF ACTURE. MANUF AC TURED T oshiba Samsung Storage T echnology Korea Corporation 416, Maetan-3Dong, Y eongtong-Gu, Suwon City , G[...]

User ’s Manual xix International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .” T o use this model properly , read the instruction manual carefully a nd keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED ser[...]

User ’s Manual xx OBS! Apparaten innehåller laserkomponent som avger laserstråini ng överstigande gränsen för laserkl ass 1. V AROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaaral lista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THA[...]

User ’s Manual xxi T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii T rademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

User ’s Manual xxii Special f eatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 TOSHIBA V alue Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15 Utilities and Applicati ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16 Options . . . . . . . . . . . . [...]

User ’s Manual xxiii Heat dispersal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-49 Using the Hard Disk Drive (HDD) Protectio n . . . . . . . . . . . . . . . . . . 4-49 Chapter 5 The Keyboard T ypewriter keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Functi[...]

User ’s Manual xxiv SSD/HDD drive cap acity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 Graphics Processor Unit ("GPU”) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 Wireless LAN . . . .[...]

User ’s Manual xxv Preface Congratulations on your purchase of the TOSHIBA Satellite A500/Satellite Pro A500/ Satellite A500D/Satellite Pro A500D se ries computer . This powerful notebook computer provides excellent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performan ce computing[...]

User ’s Manual xxvi Preface Chapter 4, Operating Basics , includes tips on care of the computer and on using the touchpad, the fingerpri nt sensor , optical disc drive, Audio/Video controls, the web camera, the microphon e, the internal modem, the FM tun er , wireless communication and LAN. Chapter 5, The Keyboard , describes special keyboard fun[...]

User ’s Manual xxvii Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign ( + ). For example, CTRL + C means you must hold down CTRL and at the same time press C . If three keys are used, hold down the first two and at the same time pr[...]

User ’s Manual xxviii General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho we ver , certain precautions should be observed to further reduce the risk of personal injury or damag e to the computer . Be certain to read the general precau tions below and to note the caut[...]

User ’s Manual xxix General Precautions T o keep your comp uter in prime ope rati ng cond ition, protect your work area from: ■ Dust, moisture, and direct sunlig ht. ■ Equipment that generate s a strong electromagnetic field, such as stereo speakers (other tha n speak ers that are connected to the computer) or speakerphones. ■ Rapid changes[...]

User ’s Manual xxx General Precautions Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system. The operation of the computer wil l not be impa ired in any way , but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use. Instruction Manual [...]

User ’s Manual 1-1 Chapter 1 Introduction This chapter provides an equipment checkli st, and it identifies the computer ’s features, options and accessories. Equipment checklist Carefully unpack your comp uter , taking care to save the b ox and packaging materials for future use. Hardware Check to make sure you have al l the following items: ?[...]

User ’s Manual 1-2 Introduction Sof twar e The following Wi ndows ® operating system and ut ility sof tware are pre-installed. ■ Microsoft ® Windows V ista ® ■ Modem Driver (Can be used only for Modem models) ■ Bluetooth Driver (Can be used only for Bluetooth models) ■ Display Drivers for Windows ■ TOSHIBA V alue Added Package ■ TO[...]

User ’s Manual 1-3 Introduction Documentation ■ TOSHIBA Satellite A500/Sate lli te Pro A500/ Satellite A500D/Satellite Pro A500D series Portable Personal Computer User’s Manual (User ’s Manual) ■ Instruction Manual for Safety and Comfort ■ End User License Agreement If any of the items are missing or damaged, contact your dealer immedia[...]

User ’s Manual 1-4 Introduction Memory Slots PC2-6400 1 GB, 2 GB or 4 GB memory modules can be installed in the two memory slots of below models: Mobile Intel ® PM45 Express Chi pset model/ Mobile Intel ® GM45 Express Chipset model/ Mobile Intel ® GL40 Express Chi pset/ AMD M780G Chipset model/ AMD M780V Chipset model. Maximum system memory si[...]

User ’s Manual 1-5 Introduction Vi deo RAM Video RAM depends on the model you purchased. Mobile Intel ® GM45 Express Chipset model/ Mobile Intel ® GL40 Express Chi pset model: Video RAM capacity shares with main memory , and the proportio n depends on Dynamic Video Memory T echnology . Mobile Intel ® PM45 Express Chipset model/ Mobile Intel ®[...]

User ’s Manual 1-6 Introduction Disks Hard disk dr ive or Solid st ate drive This computer is equipped with the following types of Solid S tate Drive(SSD),hard disk drive(HDD).The capacity of each hard disk drive model is different. ■ SSD ■ 64GB ■ 128GB ■ 256GB ■ HDD ■ 160GB ■ 250GB ■ 320GB ■ 400GB ■ 500GB Please note that par[...]

User ’s Manual 1-7 Introduction Optical disc drive DVD Super Multi drive The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and writes CD-R's at u p to 24x speed, CD-RW's at up to 24x speed, DVD-RW 's at up to 6x speed, DVD-R's, DVD+R's and DV D+RW's at up to 8x speed, DVD-[...]

User ’s Manual 1-8 Introduction Keyboard Pointing Device Power Ports Built-in The internal keyboard provides dedicated cursor control overlay keys, and Keys. The keyboard is compatible with the IBM ® enhanced keyboard. Refer to Chapter 5, The Keyboard , for details. Built-in T ouch Pad The integrated T ouch Pad and co ntrol buttons in the palm r[...]

User ’s Manual 1-9 Introduction Slots Multimedia ExpressCard ™ The internal ExpressCar d slot is a Universal slot. This slot supports ExpressCard/54 an d ExpressCard/34 modules. Bridge media This slot lets you insert an SD ™ /SDHC ™ memory card, miniSD ™ /microSD ™ Card, Memory S t ick ® (PRO ™ /PRO Duo ™ ), xD-Picture Card ™ and[...]

User ’s Manual 1-10 Introduction DisplayPort DisplayPort connects cable. Like HDMI, DisplayPort cables can send video and audio signal s when connected to a device that supports DisplayPort. Refer to Chapter 8, Optional Devices , for more details. Head phone (S/PDIF) jack This jack lets you connec t digital speake rs or a stereo headphone (16 ohm[...]

User ’s Manual 1-1 1 Introduction Communications Modem Some models are equi pped with the integrated modem. The integrated modem provides capability for data and fax communications that support the V .90 (V .92) standards and includes a modem jack for connection to the telephone line. Please note that b oth the V .90 and V .92 standards are only [...]

User ’s Manual 1-12 Introduction Security Software The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability . Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the c[...]

User ’s Manual 1-13 Introduction Display au tomatic power off *1 This feature au tomaticall y cuts off power to the computer's display panel when there is no keyboard input for a specified time, with powe r being restored the next time a key is pressed. This can be specified in the Power Opti ons. HDD automatic power off *1 This feature au t[...]

User ’s Manual 1-14 Introduction If the processor's temperature reaches an unacceptably high level with either setting, the comp uter will autom atica lly shut down to prevent any damage - in this instance any u nsaved data in memory will be lost. TOSHIBA HDD Protection This feature uses the acceleration sen sor built in the computer to dete[...]

User ’s Manual 1-15 Introduction T OSHIBA V alue Added Package This section describes the TOSHIBA Component features pre-installed on the computer . TOSHIBA Power Saver TOSHIBA Power Saver provides you with the features of more various power supply managements. TOSHIBA Button Support This utility controls t he follow ing computer button functions[...]

User ’s Manual 1-16 Introduction Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on th eir operation, please refer to each utility's online manu al, help files or README.TXT file. Fingerprint Utility Some models of this computer [...]

User ’s Manual 1-17 Introduction TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communica tion devices and network connections, hel p in the identification of communication problems and allow the creation of profiles if you need to switch between different locations and communication networks. T[...]

User ’s Manual 1-18 Introduction TOSHIBA DVD-RAM Utility This utility has the functi on of Physical Fo rmat and Write-Protect to DVD-RAM. This utility is contained the setup module of TOSHIBA Disc Creator . T o start this utility , click Start → All Programs → TO SH I B A → CD&DVD Applications → DVD-RAM Utility . Corel DVD MovieFactor[...]

User ’s Manual 1-19 Introduction Window s Mobility Center This section describes the Windows Mobility Center . Mobility Center is a utility for accessing several mobile PC settings quickly in one window . A default maxi mum of eight tiles are provided by the ope rating system, and the additional two tiles are added to your Mobility Center . ■ L[...]

User ’s Manual 1-20 Introduction Options Y ou can add a number of options to make your computer even more powerful and con venient to use. The foll owing options are available: Memory expan sion A 1.024MB, 2.048MB or 4.096MB me mory module (PC2-6400) can easily be installed i n the computer . Battery Pack An additional battery pack can be purchas[...]

User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the vari ous components of your computer . Become familiar with each component before yo u operate the computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position. Figure 2-1 Front of the computer wit[...]

User ’s Manual 2-2 The Grand T our Infrared receiver window This is a sensor window that receives signals from the remote control which is provided with your computer. Wireless communication switch Slide this switch to the right to turn on Wireless LAN, UWB and Bluetooth functions. Sl ide it to the left to turn off the functions. ■ Tu r n W i -[...]

User ’s Manual 2-3 The Grand T our Lef t side The following figure shows the comp uter's left side. Figure 2-2 The left side of the computer 1. Universal serial bus (USB 2.0) port 2. Cooling vent s *3. External monitor port 4. LAN jack *5. HDMI out port 6. Expres s Card slot 7. eSA T A/USB combo port 8. Headphone (S/PDI F) jack 9. Microphone[...]

User ’s Manual 2-4 The Grand T our Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vent s. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious inju ry . External monitor port This port allows you to connect an exter[...]

User ’s Manual 2-5 The Grand T our eSA T A/USB combo port This Universal Serial Bus port, which complies to the USB 2.0 standard, is provided on the lef t hand side of the comput er . The por ts with the ic on ( ) has USB Sleep and Charge function . This port has eSA T A (External Serial A T A) function. Headphone (S/PDIF) jack A 3.5 mm mini head[...]

User ’s Manual 2-6 The Grand T our Right side The following figure shows the comp uter ’s right side. Figure 2-3 The right side of the computer *1. Optical disc drive (tray) 2. Universal Serial Bus (USB 2.0) port *3. Modem jack 4. DC IN 19V jack 5. Security lock slot *6. TV T uner jack *7. FM T uner jack *8. Optical Disc drive (slot) *Depending[...]

User ’s Manual 2-7 The Grand T our Optical disc dri ve (tray) Some computers are co nfigured with a tray version of the D VD Super Multi dr ive. The full- size drive provides high-performance execu tion of CD/DVD-ROM-based programs. Universal Serial Bus (USB 2.0) por t T wo Uni versal Serial Bus ports, which comply with the USB 2.0 standard, are [...]

User ’s Manual 2-8 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou should ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. Figure 2-4 The underside of the computer Optical disc dri ve (slot) Some models are equipped with a slot version of the DVD Su per [...]

User ’s Manual 2-9 The Grand T our Battery safety lo ck Slide this latch into its 'Unlock' posi tion in order to release the battery pack and prepare for removal. Battery release latch Slide and hold this latch into its 'Unlock' position in order to release the battery pack. For more detailed information on removing the batter[...]

User ’s Manual 2-10 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. Figure 2-5 The front of the T ouch Pad model w ith the display open 1. Power button 2. S tereo speakers 3. Fr[...]

User ’s Manual 2-1 1 The Grand T our Power button Press this button to turn the compu ter's power on and off. Stereo speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, gene rated by the system. Some models are equipp ed with Harman/Kardon speakers. Keep foreign objects out of t[...]

User ’s Manual 2-12 The Grand T our Display screen Please be a ware that, when the computer is operating on the AC adaptor , the image displayed on the internal screen will be somewhat brighter t han when it operates on battery power . This difference in brightness levels is intended to save power when opera ting on batteries. For more informati [...]

User ’s Manual 2-13 The Grand T our Display screen Please be a ware that, when the computer is operating on the AC adaptor , the image displayed on the internal screen will be somewhat brighter t han when it operates on battery power . This difference in brightness levels is intended to save power when opera ting on batteries. For more informati [...]

User ’s Manual 2-14 The Grand T our Web Ca me r a L ED The Web Camera LED glows when the Web Camera is operating. Please remove the protecti ve plastic-film before using the Web Camera. LCD Sensor switch This switch senses when the display panel is either closed or opened and activates the Panel Power Off/On feature as appropriate. F or example, [...]

User ’s Manual 2-15 The Grand T our Function buttons Seven butto ns are provided with som e models. Figure 2-6 Front operation panel Available for use: ECO, CD/DVD, Play/Pause, Previous, Next, Mute, V olume Do wn, V olume Up. These buttons allow you to manage a udio/video, run applications and access utilities. Refer to the Function button s sect[...]

User ’s Manual 2-16 The Grand T our System indicators The LED system indicators for specif ic computer operations glow when those operations are in progress. Figure 2-7 System indicators DC IN The DC IN indicator normally glow s white when power is being correctly supplied from the AC power adaptor . However , If the output voltage from the adapt[...]

User ’s Manual 2-17 The Grand T our Keyboard indicators The following figures show the position s of the CAPS LOCK indicator and the T ouchpad Enable/Disable button. Figure 2-8 Keypad indicators CAPS LOCK This indicator glows green when lette r keys are locked into their uppercase format. T ouchp ad Enable/Disable button The touchpad indicator be[...]

User ’s Manual 2-18 The Grand T our Optical disc drives The computer is configured with a DV D Super Multi drive. A Serial A T A interface controller is used for 12 cm(4.72") and 8cm(3.15") (Tray ODD) and 12cm(4.72") (Slot ODD) CD /DVD operat ion. For further information on loading and unloading discs, please refer to the Writing C[...]

User ’s Manual 2-19 The Grand T our DVD Supe r Multi drive The full-size DVD Super Multi drive module al lows you to record data to recordable CD's and DVD's as well as run 12cm(4.72") and 8cm(3.15") (for T ray type) or 12cm (4.72" ) (for Slot type) CD's and DVD's without using an adaptor . Some types and format[...]

User ’s Manual 2-20 The Grand T our Remote Controller A remote controller , which is provided with some model s, enables you to perform some functio ns of your computer from a dist ant location. There are two different types of remote controllers: ■ Full size remote controller ■ Slim size remote controller The following figure shows the butto[...]

User ’s Manual 2-21 The Grand T our Full Size Re mote Contro ller Figure 2-9 Full Size Remote Controller a d h f j l q r n u e c g i m t k s b o p y w x z 1. Power 2. Access indicator 3. Record 4. S top 5. Pause 6. Play 7. REW (Rewind) 8. FWD (Fast Forward) 9. Replay 10. Skip 11 . B a c k 12.More In fo 13. Arrows 14. OK 15. V olume Control 16. Ch[...]

User ’s Manual 2-22 The Grand T our Power S tarts or terminates the operating system. This button functions like the Power button of your computer . By default, the Sleep Mode is equivalent to the Power Off state of your computer . T o change the setting, click Start , select Control p anel → System an d Maintenance → Power Options . When pre[...]

User ’s Manual 2-23 The Grand T our OK Select s the desire d action or window option. It acts like the ENTER Key . If watching TV in full screen mode, pressing OK switches back to the previous viewed channel. Press again to toggle back. It acts the same way as a Jump button on some TV remote controls. Vo l u m e + Increases the volume while watch[...]

User ’s Manual 2-24 The Grand T our Slim Siz e Remote C ontroller Figure 2-10 Slim Size Remote Controller Red, Green, Y ellow and Blue buttons It jumps to a registration link. These buttons are not provided with some models. Te l e t e x t S tarts or terminates the T eletext mode. This button i s not provided with some models. a b c g e f l k o n[...]

User ’s Manual 2-25 The Grand T our CD/DVD Pressing this button wi ll launch an application program th at allows you to watc h a DVD or listen to a CD. Pressing this button while the computer is on or in Sleep Mode, will launch Media Center . My Music is started when a music CD is inserted in the optical disc dri ve and My Video is started when a[...]

User ’s Manual 2-26 The Grand T our Using the Remote Contro ller Some computers include a remote contro l unit, which allo ws you to control some of your computer ’s functions from a distant location. Operational ran ge of the Remote C ontroller Point the Remote controller at your computer and press a button. The operational angle and distance [...]

User ’s Manual 2-27 The Grand T our Figure 2-1 1 Ope rational range of the remote control * The appearance of the provided Re mote Controller may vary from mod el to model. Even if the remote controller is wi thin the effective range as describe d above, it may malfunction or not work correctly in the following cases. ■ When an obstacle stands [...]

User ’s Manual 2-28 The Grand T our Inst alling/Remo ving batteries Be sure to install the provided CR2016 type batteries before usin g the remote controller . T ype of battery that can b e used for the Full S ize Remote Controlle r When the batteries shipped with the Remote Controller are disch arged, replace them with commercially av ailable AA[...]

User ’s Manual 2-29 The Grand T our Inst alling the batteries 1. Open the battery cover on the back of the Remote Controller. Slide the cover in the direction of the arrow to remove the cover . Figure 2-12 Opening the battery cover 2. Insert the batteries in place. Be sure to place the batteries w ith t heir polarities (+ and -) in the correct po[...]

User ’s Manual 2-30 The Grand T our Replacing the b atteries When the batteries in the Remote Controller reach the end of their life, th e Remote Controller may not operate correctly or work only within a short distance from your computer . In this instance, you should purchase new batteries and replace the discharged ones. 1. Open the battery co[...]

User ’s Manual 2-31 The Grand T our Figure 2-17 Inserting the battery 3. Close the battery cove r . Close the cover securely until it clicks. Figure 2-18 Closing the battery cover Replacing the b attery 1. Open the battery cover on the back side of the remote contro ller . 2. Hold down the stopper and slide the batte ry out of battery case. Figur[...]

User ’s Manual 2-32 The Grand T our Figure 2-20 Inserting a Slim size remote controller 3. Press a Slim size remote controller gently to ensure a firm connection is made. Removing a Slim size remote controller T o remove a Slim size remote controller , fol low the steps as detailed below: 1. Press a Slim size remo te controller slightly to make i[...]

User ’s Manual 2-33 The Grand T our AC adaptor The AC adaptor can automat ically adjust to any voltage rang ing from 90 to 264 volts and to a freque ncy of either 47 o r 63 hertz, enablin g you to use this computer in almost any countr y/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer . T o rech[...]

User ’s Manual 3-1 Chapter 3 Getting S t arted This chapter provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening the display ■ T urning on the power ■ S tarting up for the first time ■ T urning off the power ■ Resta rting the computer ■ System Recovery Option[...]

User ’s Manual 3-2 Getting S tarted Connecting the AC adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power . The AC adaptor can be connected to any power source[...]

User ’s Manual 3-3 Getting S tarted ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specif ied by TOSHIBA to avoid any risk of fire or other damage to the computer . Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resultin g in serious injury . TOSHIBA assumes no [...]

User ’s Manual 3-4 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 3-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 3-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor' s DC output plug to the DC IN 19V jack on the right side of the computer . Figure 3-3 Connecting[...]

User ’s Manual 3-5 Getting S tarted Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down th e palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be ad justed to provide optimu[...]

User ’s Manual 3-6 Getting S tarted ■ When opening the panel, please be careful not to fo rce it beyond the point where it moves easily . ■ Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage. ■ Do not press or push on the display panel. ■ Do not lift the computer by t[...]

User ’s Manual 3-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Po wer indicator li ght will then indicate the st atus. Please refer to t he Monitoring of power condition section in Chapter 6, Power and Power-up Modes for more information. 1. Open the computer's display panel. 2. Press the comp[...]

User ’s Manual 3-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Do wn Mode no data will be saved and the computer will boot to the opera ting system's main screen the next time it is turned o[...]

User ’s Manual 3-9 Getting S tarted Benefits of Hibernation Mode The Hiberna tion Mode feature provi des the following ben efits: ■ Saves data to the hard disk drive when the computer automatically shuts down because of a low battery condition. ■ Y ou can return to your previo us working environment immediately when you turn on the computer .[...]

User ’s Manual 3-10 Getting S tarted Sleep Mode If you have to interrupt your work, you are able to tu rn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer's main me mory so that when yo u turn on the power again, you can continue working right where you [...]

User ’s Manual 3-1 1 Getting S tarted Executing Sleep Mode Y ou can e nter Sleep Mode in one of four ways: ■ Click Start then cl ick the power button ( ) located in the powe r management buttons ( ). Please note that this feature must b e enabled within the Power Options (to access it, click Start → Control Panel → System an d Maintenance ?[...]

User ’s Manual 3-12 Getting S tarted Rest arting the computer Certai n conditions requi re that you reset the computer , for example if: ■ Y ou ch ange certain computer settings. ■ An error occurs and the computer does not respond to your keyboard commands. If you need to restart the computer , th ere are three ways this can be achieved: ■ [...]

User ’s Manual 3-13 Getting S tarted Creating Optical Reco very Discs This section describes how to create Recovery Discs. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to DVD media by using the following steps: 1. Select either blank DVD media. 2. The application will allow you to choos e [...]

User ’s Manual 3-14 Getting S tarted Restoring the pre-in stalled sof tware from the Recovery hard disk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition. This p artition stores files which can be used to restore pre-installed software in the event of a problem. If you subsequently set up your hard d[...]

User ’s Manual 3-15 Getting S tarted Restoring the pre-inst alled softw are from your created Recovery Discs If the pre-installed files are damaged , you are able to either use the Recovery Discs you have created or the hard disk drive recovery proce ss to restore the computer to the state it was in when you originally received it. T o perform th[...]

User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer an d highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. Figure 4-1 T ouch Pad and [...]

User ’s Manual 4-2 Operating Basics The two butt ons below the T ouch Pad are used like the but tons on a standard mouse - press the left butt on to select a menu item or to manipulate text or graphics designated by the po inter , and press the rig ht button to display a menu or other function depending on the software you are using. The T ouchpa[...]

User ’s Manual 4-3 Operating Basics Figure 4-2 Slide the finger over the recognition sensor Point s to note about the Fingerprint Se nsor Failure to follo w these guidelines might result in (1 ) damage to the se nsor or cause sensor failure, (2) finger reco gnition problems, or lower finger recognition success rate. ■ Do not scratch or poke the[...]

User ’s Manual 4-4 Operating Basics ■ W ash and dry your hands thoroughl y . ■ Remove static electricity from y our fingers by touching any metal surface. S tatic electricity is a common cause of sensor failures, especially when the weather is dry . ■ Clean the sensor with a lint-free cloth - do not use detergent or any other chemicals to c[...]

User ’s Manual 4-5 Operating Basics Fingerprint sensor limit ations ■ The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint. ■ A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration . ■ The recognition success rate may dif fer from u ser to[...]

User ’s Manual 4-6 Operating Basics 3. The " Enroll " screen is displa yed. Click the non-en rolled finger icon above the finger and click Ne xt . 4. The note for enrollment operation scre en is displayed. Confirm the message and click Next . 5. The Scanning Practice screen is displayed. Y ou can practice swiping your finger . When yo u[...]

User ’s Manual 4-7 Operating Basics Windows Logon via Fingerprint Authen tication In place of the usual Windows logo n by ID and password, fingerpri nt authentication also allo ws logon to Window s. This is useful especially when ma ny users are using the PCs, as user selection can be skipped. Fingerprint Authentication Procedure 1. S tart up the[...]

User ’s Manual 4-8 Operating Basics Fingerprint Single Sign -on Feature General The Single Sign-On is a feature that allows the user to complete the authentication for both th e User Password (and opti onally , the HDD user and Supervisor passwords) and logging on to Windows using only one fingerprint authentica tion when booting u p. It is neces[...]

User ’s Manual 4-9 Operating Basics Using the TO SHIBA USB S leep and Charge function USB Sleep and Charge Y our computer can supply USB bus power (DC5V) to the USB port even when the power of the computer is turned OFF . "Power OFF" includes Sleep Mode, Hibernation Mode or shutdown state. This function can be used for ports that suppor[...]

User ’s Manual 4-10 Operating Basics St arting the USB Sleep an d Charge Utility T o start the utility , click Sta rt → All Programs → TOS HI B A → Utilities → USB Sleep and Charge ; or Control Panel → TOSHIBA USB Sleep a nd Charge . Enabling USB Sleep and Charge This utility can be used to enable and disab le the USB Sleep and Charge f[...]

User ’s Manual 4-1 1 Operating Basics Check the check boxes to enable the USB Sleep and Charge function. In the default state this function is disabled. Power supply mod e settings There are several USB Sleep and Charge function modes. "Mode 4 (Default)" should normally be used. Set one of the other mo des (try from "Mode 3" t[...]

User ’s Manual 4-12 Operating Basics Loading discs ■ Tr a y O D D T o load C D/DVD's, follow th e steps as list ed below and refe r to figures 4-4 to 4-6. 1. When the computer's power is on, press the eject button to open the disc tray slightly . Figure 4-3 Pressing the eject button 2. Grasp the disc tray gently and pull until it is f[...]

User ’s Manual 4-13 Operating Basics 3. Lay the CD/DVD, label side up, in the disc tray . Figure 4-5 Inserting a CD/DVD 4. Press the center of the CD/DVD gently until you feel it click into place on the center spi ndle. The disc shoul d be slightly below the top of the spindle and flush with the spindle base . 5. Press the center of the disc tray[...]

User ’s Manual 4-14 Operating Basics ■ Slot ODD T o load CD/DVD's, follow the steps as listed below and refer to following figures. 1. When the computer's power is on, insert CD/DVD into the ODD directly . Removing discs ■ Tr a y O D D T o remove a CD/DVD, follow the steps as listed below . 1. When the computer's power is on, p[...]

User ’s Manual 4-15 Operating Basics 2. The CD/DVD media will extend slig htly over the side s of the disc tray in order that you can hold it. Grasp it carefully by its edges and lift it vertically off of the central spind le and out of the tray . Figure 4-6 Removing a CD/DVD 3. Press the center of the disc tray in order to close it - the tray wi[...]

User ’s Manual 4-16 Operating Basics Function buttons This section describes the Function b uttons. Seven butto ns are provided with som e models. Figure 4-8 Function button W ri ting CD/ DVD on DVD Super Multi drives Y ou can u se the DVD Sup erMulti drive to write data to eith er CD-R, CD- RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R ([...]

User ’s Manual 4-17 Operating Basics Import ant message Before you write or rewrite to an y of the media supported by the DVD Super Multi drive, please read and follow all of the setup and operati ng instructions in this section. If you fail to do so, you may find that the DVD Super Multi drive drive may not function properly , and you may fail t[...]

User ’s Manual 4-18 Operating Basics DVD-R: DVD Sp ecifications for Rec ordab le Disc for General V ersion 2.0 T AIYO YUDEN Co.,Ltd. (for 8x and 16x speed media) MITSUBISHI KAGAKU MEDIA CO., L T D. (for 4x, 8x and 16x speed media) Hitachi Maxell,Ltd. (for 8x and 16x speed media) DVD-R (Dual Layer): MITSUBISHI KAGAKU MEDIA CO., L TD. (for 4x and 8[...]

User ’s Manual 4-19 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr i ting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them. ■ The actual number of rewrites to CD-RW , DVD-RW , DVD+RW or DVD- RAM media will be affected by the quality of the disc itself an[...]

User ’s Manual 4-20 Operating Basics ■ Be sure to close all other software programs except for the writing software itself. ■ Do not run software such as a screen saver wh ich can put a heavy load on the processor . ■ Operate the computer at its full power settings - do not use any power- saving features. ■ Do not write information while [...]

User ’s Manual 4-21 Operating Basics ■ Make sure tha t the write/rewr ite operation is completed before going into either Sleep Mode or Hiber nation Mode (writing is completed if you can remove an optical media on the DVD Super Multi drive). ■ If the media is of poo r quality , or is d irty or damaged, writing or re writing errors may occur .[...]

User ’s Manual 4-22 Operating Basics ■ Y ou ca nnot back up CD-ROM, CD-R or CD-RW media to DVD+R, DVD+R (Double Layer) or DVD+RW media using the 'Disc Backup' function of T OSHIBA Disc Creator . ■ Y ou ca nnot back up DVD-ROM, DVD Video, DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DVD+RW to CD- R or CD-RW medi[...]

User ’s Manual 4-23 Operating Basics How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. ■ Opening the TOSHIBA Disc Creator Manual Start → All Programs → TO SH IB A → CD&DVD Applications → Disc Creator Help When Using Corel DVD MovieFactory ® for TO SHIBA How [...]

User ’s Manual 4-24 Operating Basics 3. Add source from HD Disk by click Add V ide o files button to invoke browser dialog box. 4. Choose the source video then go to Next page to apply Menu. 5. After choose the menu template, press N ext button to go to Burning Page . 6. Choose the output type then press Bur n button. How to learn more about Core[...]

User ’s Manual 4-25 Operating Basics ■ Do not perform any of th e following actions: ■ Operate the computer for any ot her function, includin g using a mouse or T ouch Pad, or closing/opening the display panel. ■ Bump or cause vibration to the computer . ■ Use the Mode control button and Audio/Video control button to reproduce music o r v[...]

User ’s Manual 4-26 Operating Basics ■ Do not playback DVD discs Video while watching or recording televisio n programs using other applications. Doing so may cause DVD Video playback or television program recording errors. In addition, if prescheduled recording starts during DVD Video playback it may cause DVD Video playback or television prog[...]

User ’s Manual 4-27 Operating Basics 4. (Print Screen functions are di sabled even when running other applications besides "TOSHIBA DVD PLA YER" and when "TOSHIBA DVD PLA YER" is minimized.) Please close the "TOSHIBA DVD PLA YER" to use the Print Screen function. 5. Carry out the installation/uninsta llation of the &[...]

User ’s Manual 4-28 Operating Basics CD/DVDs 1. S tore your CD's and DVD's in the containers they origin ally came in to protect them and keep them clean. 2. Do not bend the CD's or DVD's. 3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD or DVD that contains the data. 4. Hold the CD or DVD by its [...]

User ’s Manual 4-29 Operating Basics 1 1. Magnetic energy can destroy the data on your floppy diskettes. In view of this you should keep your flopp y diskettes away from speakers, radios, televisions and other sources of magnetic fields. Sound system This section describes some of the audio control functions. Adjusting System V olume Y ou can con[...]

User ’s Manual 4-30 Operating Basics ■ HDMI Output should be selecte d when connecting the HD MI cable to the HDMI jack for playing digital sound on digital audio equipment. ■ Microphone is the default input device . It should be selected when using the computer ’s internal microphone or an external microphone connected to the Microphone ja[...]

User ’s Manual 4-31 Operating Basics Using the web camera Some models are e quipped with a Web Camera. Web Camera is a device that allows you to record video or take photographs with your compute r . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger . Camera Assistant Sof tware will [...]

User ’s Manual 4-32 Operating Basics Using TOSHIBA W eb Camera Appli cation TOSHIBA W eb Camera App lication is pre-configured to start when yo u turn on Windows Vista ® ; if you need to restart it go to St a rt → A ll Programs → TOS HI BA → Utilities → W eb Camera Applic ation . Figure 4-10 Using the Software ■ Please unstick the prot[...]

User ’s Manual 4-33 Operating Basics Using TOSHIBA Face Recognition This feature uses a face verification lib rary to verify the face data of users when they log in Windows. Th e user can thus avoid having to enter a password or the like, which makes the login process easier . Capture S till Image Click to ca pture a still image, and see a previe[...]

User ’s Manual 4-34 Operating Basics Disclaimer T oshiba does not guarantee that the face recognitio n utility technology will be completely secure or error-free. T oshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. T oshiba is not liable for any failure or damage that might ari[...]

User ’s Manual 4-35 Operating Basics 8. Registration will end after you have repeatedly moved your neck left, right, down and up. When the register succeeds, below message will be di splayed on the screen: " Registration successful. Now we 'll do the verification test. Click the Next button. " Click the Next button to perform the v[...]

User ’s Manual 4-36 Operating Basics How to lau nch the help file For further information on this utility , please refer to the help file. 1. T o launch the help file, click Sta rt -> All Pr ograms -> TOS HI BA -> Utilities -> T OSHIBA Face Rec ognition Help . Windows Logon via TOSHIBA Face Recognition This section explains how to log[...]

User ’s Manual 4-37 Operating Basics Modem This section describes how to connect and disconnect the internal modem to and from a telepho ne jack. Region selectio n T elecommunication regulati ons vary from one re gion to another , so yo u will need to make sure the internal modem’s settings are correct fo r the region in which it will be used. [...]

User ’s Manual 4-38 Operating Basics 3. Click the icon with the p rimary (left) mouse button to d isplay a list of regions that the modem su pports, together with a sub-menu which details telephony location information - a check mark will appe ar next to the currently selected region and telephon y location. 4. Select either a region from the reg[...]

User ’s Manual 4-39 Operating Basics Connecting the m odular cable T o connect the modem's modular cable, follow the ste ps as detailed below: 1. Plug the end of the modular cable into the computer's modem jack. 2. Plug the other end of the modular cable into a te lephone jack. Figure 4-1 1 Connecting the interna l modem Disconnecting t[...]

User ’s Manual 4-40 Operating Basics The dimensions and shape of the TV antenna port vary for different regions. TV T uner will function only in th e co untry where the computer was purchased. Using t he TV T uner Antenna ■ The quality of sounds and pictures greatly depends on the radio propagation conditions. ■ When you use your computer in [...]

User ’s Manual 4-41 Operating Basics 1. Save data, shutdown Windows and turn off the power . 2. Connect the antenna cable to the TV antenna port of your computer . Figure 4-12 Connecting the antenna cable FM tuner This section describes how to con nect the FM tuner antenna to the computer's FM antenna p ort. Use the FM Radio of Windows Medi [...]

User ’s Manual 4-42 Operating Basics Using the FM tuner T o connect the FM tuner antenna, fo llow the step s as detailed be low: 1. Plug the FM tuner a ntenna into the comp uter's FM tuner jack. Figure 4-13 Connecting the FM tuner ja ck 2. Select Star t → All Programs → NXP FM T une r to start FM sof tware. Wireless com munications The c[...]

User ’s Manual 4-43 Operating Basics Setting 1. Please make sure that the Wireless Communication S witch is turned on. 2. Click Sta rt and then click Connect T o to display Connect to a n etwork window . 3. Click Set up a connec tion or network . 4. Follow the wizard. Y ou will need the name of the wireless n etwork together with security setting[...]

User ’s Manual 4-44 Operating Basics Security T wo advanced security mechanis ms ensure a hig h le vel of security: ■ Authentication prevents access to critical data and makes it impossible to falsify the origin of a message. ■ Encryption prevents eavesdropping and maintains link privacy . Bluetooth TM St ack for Windows ® by T OSHIBA Please[...]

User ’s Manual 4-45 Operating Basics Wireless communication indicator The wireless communication indicator shows the status of the computer's wireless com munication function s. If you used the T askbar to disable the wireless LAN, restar t the comp uter or perform the following procedure to re-enab le it: Star t → Control Panel → System[...]

User ’s Manual 4-46 Operating Basics LAN cable types If you are using Gigabit Etherne t LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CA T5E cable or higher . Y ou cannot use a CA T 3 or CA T5 cabl e. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE- TX), be sure to connect with a CA T5 cable or higher [...]

User ’s Manual 4-47 Operating Basics Figure 4-14 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hu b connector or router . Check with your LAN administrator and hardware or software vendor before using or configuring a netw ork connection. Disconnecting the LAN cab le T o disconnect the LAN cable, follow the steps as det a[...]

User ’s Manual 4-48 Operating Basics ■ Clean the plastics of the comp uter using a slig htly water dampened cloth. ■ Y ou ca n clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth a nd then wiping the screen gently with the cloth. Using the cleaning cloth Some models include 1 cleaning cloth. The clean[...]

User ’s Manual 4-49 Operating Basics ■ Be careful not to subject the computer to impact or shock - a failure to follow this instruction could result in d amage to the computer , comp uter failure or loss of data. ■ Never transport your computer with any cards in stalled - this may cause damage to either the computer and/o r the card resulting[...]

User ’s Manual 4-50 Operating Basics T askbar icon TOSHIBA HDD Protection Properties Y ou can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection window . T o open the window , click Star t J All Programs J TOS HI BA J HDD Protection Settings . The window can also be started from the icon on the T askbar or from the Con[...]

User ’s Manual 4-51 Operating Basics Det ails T o open the Details window , click the Setup Detail button in the TOSHIBA HDD Protection Properties window . Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Dete ction assumes that the computer will be carried and sets the detection level to the maximum for[...]

User ’s Manual 5-1 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer . The number of keys available on your keyboard will depend on which country/region your com[...]

User ’s Manual 5-2 The Keyboard Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys. F1 through F12 are called functi on keys because they execute programmed functions when pressed and, when used in combination [...]

User ’s Manual 5-3 The Keyboard Hot keys Hot keys (pressing FN + a function or ESC key) let you enable or disable certain features of the computer . Mute: Pressing FN + ESC turns the volume on and off. Lock: Pressing FN + F1 enters ''Lock computer mode''. T o restore you r desktop, you need to log on again . Power Plan : Press[...]

User ’s Manual 5-4 The Keyboard Brightness (Up) : Pre ssing FN + F7 increases the computer's displa y panel brightness in individual steps. Wireless: Pressing FN + F8 switches the active wireless device s if the wireless communication switch is switched on. T ouch Pad: Pressing FN + F9 enables or disables the T ouch Pad function. Zoom: Press[...]

User ’s Manual 5-5 The Keyboard FN S ticky key Y ou can use the TOSHIBA Accessi bi lity Utility to make the FN key sticky , that is, you can press it once, release it, and then pres s an " F Number " key . T o start the TO SHIBA Accessibility utility , click Sta r t → All Programs → TOS HI BA → Utilities → Accessibility . Window[...]

User ’s Manual 6-1 Chapter 6 Power and Power-up Modes The computer's power resources incl ude the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and ch anging batteries, tips for saving battery power , and po wer-up modes. Pow er condition s The computer&ap[...]

User ’s Manual 6-2 Power and Power-up Modes T a ble 6-1 Power conditions continued Power indica tors As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of t[...]

User ’s Manual 6-3 Power and Power-up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be noted: Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted[...]

User ’s Manual 6-4 Power and Power-up Modes Real T ime Clock battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off. If the R TC battery becomes completely discharged, th e system will lose this in formation and [...]

User ’s Manual 6-5 Power and Power-up Modes Care and use of the battery p ack The battery pack is a vita l compon ent of portable computing and, as such, taking proper care of it will help ensure a longer operating time on battery power as well as deli ver a longer life for you r battery pack. The instructions detailed in this section will help t[...]

User ’s Manual 6-6 Power and Power-up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Battery charging notice The battery may not begin charging immedia tely under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at a[...]

User ’s Manual 6-7 Power and Power-up Modes Repeat these steps two or three time s until the battery recovers no rmal capacity . Monitoring battery ca pacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Battery S tatus in the Windows Mobility Ce nter window Maximiz[...]

User ’s Manual 6-8 Power and Power-up Modes Ret aining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention Time Extending battery life T o maximize the life of your battery p acks: ■ At least once a mo nth, disconnect the computer from [...]

User ’s Manual 6-9 Power and Power-up Modes Replacing the battery p ack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and wi ll need to be replaced when it reaches the end of its operati ng life. In ad dition to this[...]

User ’s Manual 6-10 Power and Power-up Modes 6. Slide and hold the battery release latch (1 ) to disengage the battery pack and then remove it from the computer (2). Figure 6-2 Releasing the battery pack (2) T o install a battery , follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure[...]

User ’s Manual 6-1 1 Power and Power-up Modes T OSHIBA Password Utility The TOSHIBA Supervisor Password Utility allows you to maintain an additional level of security and provides two level s of password security: User and Supervisor . User Password T o start the utility , point to or click the following items: Launch TOSHIBA Assist J SECURE J Us[...]

User ’s Manual 6-12 Power and Power-up Modes T o enter a password manually , follo w these steps: 1. T urn on the power as described in Chapter 3, Getting S tarted. The following message wil l appear in the LCD: Enter Password [xxxxxxxx] 2. Enter the Password. 3. Press Enter . Power-up modes The computer has three power-up modes: ■ Hibernation [...]

User ’s Manual 6-13 Power and Power-up Modes System aut o off This feature turns the system of f automat ically if it is not used for a set duration. The system shuts down in sleep mode or hibernation mode. If the panel power off function is enabled and you manually sh ut down Windows, do not close the computer's display panel until the shut[...]

User ’s Manual 7-1 Chapter 7 HW Setup and Passwords This chapter explains how to us e TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup allows y ou to configure setti ngs for General, Password, Display , Boot Priority , Keybo ard, USB, LAN, LED Illumination and Button Setting. Accessing HW Set[...]

User ’s Manual 7-2 HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Setup This field displays BIOS V ersion and date. Password User Password This option allows you to set or reset the user password for power on. T o enter a user password: 1. Select Registered to display the following prompt: Enter Pas[...]

User ’s Manual 7-3 HW Setup and Passwords Not registered If they do not match, the follow ing message appe ars. Y ou mus t repeat step 1. Incorrect Password!!! 4. Follow the same procedures d escribed in the earlier sectio n, How to set the password , to set a new user password. Display This tab allows you to customize your comp uter ’s display[...]

User ’s Manual 7-4 HW Setup and Passwords USB Legacy USB Support Use this option to enable or disabl e USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setti ng the USB Legacy Emulation item to enabled. LAN Wake-up o n LAN This featu re lets the comput er ’s power be tu rned on f[...]

User ’s Manual 7-5 HW Setup and Passwords Illumination Illumination ON/OFF This feature allo ws you to set conditions for Fro nt Edge Logo LED, touchpad illumination LED and Functio n button backlight LED. (Dependin g on the model you purchased) Keyboard Backlight ON On. (Default) OFF Off. Auto Keyboard backlight will be on when hit any key Fn + [...]

User ’s Manual 8-1 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility . This chapter describes the connection or installation of the following devices: Cards/memory ■ ExpressCard ■ Bridge medi a slot ■ Secure Digital (SD) Card (SD memory card, SDHC memory card, miniSD Card, microSD Ca[...]

User ’s Manual 8-2 Optional Devices Other ■ Security lock ExpressCard The computer is equi pped with a sin g le ExpressCard slot into w hich any ExpressCard device that meets industry standards, ei ther manufactured b y TOSHIBA or another vendor , can be in stalled. The slot supports hot pl ug connection and utilizes the PCI Expre ss interface [...]

User ’s Manual 8-3 Optional Devices Figure 8-1 Inserting the ExpressCar d 6. After inserting the ExpressCard you sho uld refer to its documentation and also check the configu ration in Wi ndows in o rder to ensure that it is correct. Removing an ExpressCard T o remove an ExpressCard, follow the steps as detailed below . 1. Open the Safely Remove [...]

User ’s Manual 8-4 Optional Devices Bridge media slot The computer is equipp ed with a Bri dge medi a slot that can accommodate some kinds of memory media with vari ous memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants. Figure 8-3 Examples of memory media ■ Keep foreign [...]

User ’s Manual 8-5 Optional Devices Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC memory card SD/SDHC memory cards compl y with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. Fo[...]

User ’s Manual 8-6 Optional Devices Additional memory module Y ou can install additional memory into th e computer in order to increase the amount of system memory that is avai lable. This section describes how to install and remove optional memory modules. Point to note abou t memory mo dule error If you install a memory module that is not compa[...]

User ’s Manual 8-7 Optional Devices Inst alling a memory m odule The computer contains slots for two memory modules, one positioned immediately over the other - the proc edures are the same for installing either modul e. 1. Shut down the comp uter - make sure the Pow er indicator is off (refer to the T urning off the po wer section in Chapter 3, [...]

User ’s Manual 8-8 Optional Devices 5. Seat the memory module cover in place and secure it with one scre w . Figure 8-5 Seating the memory module cover 6. Install the battery pa ck - refer to Replacing th e battery pack section in Chapter 6, Power and Power-up Modes , if required. 7. T urn your computer ov er . 8. Turn the computer on and make su[...]

User ’s Manual 8-9 Optional Devices Removing a m emory module T o remove the memory module, follow the steps as detailed below: 1. Set the computer to Boot Mode and turn its power of f - make sure the Power indicator is of f (refer to the T urning off the power section in Chapter 3, Getting S tarted if required). 2. Remove the AC ad aptor and all[...]

User ’s Manual 8-10 Optional Devices USB floppy diskette drive The USB floppy diskette drive accommod ates e ither a 1.44MB or 720KB a 3 2/1" floppy diskette and connects to one of the computer's USB ports. Figure 8-6 USB floppy diskette drive The USB floppy diskette drive is available only as an option. USB connector Insert this connec[...]

User ’s Manual 8-1 1 Optional Devices Using the USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB floppy diskette and connects to one of the computer's USB ports. Connecting the USB floppy diskette drive T o connect the drive, plug the floppy diskette drive's USB connector into one of the comp[...]

User ’s Manual 8-12 Optional Devices Disconnecting the USB floppy diskette drive When you have finished using the USB floppy diskette drive, you can follow the procedures below in order to disconnect it: 1. W ait for the Disk-In-Use Indicator light to go out to make sure all floppy diskette activity has stopped. 2. Click the Safely Re move Hardwa[...]

User ’s Manual 8-13 Optional Devices Disconnecting an eS A T A device When you have finished using an eSA T A device, you can follow the procedures below in order to disconnect it: 1. W ait fo r the indica tor light of an eSA T A devi ce to go out to make sure all activity has stopped. 2. Click the Safely Remove Hardwar e icon on the Windows T as[...]

User ’s Manual 8-14 Optional Devices Figure 8-9 Connecting the monitor ca ble to the external monitor port 3. T urn the external monitor ’ s powe r on. 4. T urn the computer's powe r on. When you turn on the power , th e computer will automatically recog nize the monitor and determine whether it is a color or monochrome device . In the eve[...]

User ’s Manual 8-15 Optional Devices HDMI The Video data on your computer can be viewed on a TV set. T o do so, connect your computer ’s HDMI out port to the TV using the HDMI out cable. Y ou can use the hotkeys FN + F5 to change the display device. Refer to Chapter 5, The Keyboard . Connecting the H DMI out port 1. Plug one end of the HDMI cab[...]

User ’s Manual 8-16 Optional Devices Settings for display video o n HDMI T o view video on the HDMI device, be sure to configure th e following settings otherwise you may find that nothing is displayed. Select HD Form at T o select the display mode, follow the steps as detailed below: 1. Click Start and click Control Panel . 2. Click Appearance a[...]

User ’s Manual 8-17 Optional Devices REGZA Link (PC Contr ol) HDMI out port can connect wi th T ype A connector HDMI cable. One HDMI cable can send and re ceive video, audio and control signals.HDMI-CEC (Consume r Electronics Control) is a standard in the CE Industry which allows devices to work together over an HDMI cable. By connecting a TV pla[...]

User ’s Manual 8-18 Optional Devices 4. T urn the computer on. Security lock A security locks enable you to anchor your computer to a desk or other heavy object in order to help prevent unauthorized removal or theft. The computer has a security lock slot on i ts right side into which you can attach one end of the security cable, while the othe r [...]

User ’s Manual 9-1 Chapter 9 T roubleshooting TOSHIBA have designed this computer for durability , ho wever , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems fr om occurring in[...]

User ’s Manual 9-2 T roubleshooting Preliminary c hecklist Y ou should always consider the simple st solution first - the items detailed in this checklist are easy to fix and yet may cause what appears to be a serious problem : ■ Make sure you turn on all peripheral devices before you turn on the computer - this i ncludes your printer and any o[...]

User ’s Manual 9-3 T roubleshooting Record your observations so you can describe them in detail to your reseller , dealer or service provider . Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals. Basic problems may oc cur in the following areas: Software The problems may be[...]

User ’s Manual 9-4 T roubleshooting System start- up When the computer does not start pr operly , check the following items: ■ Self test ■ Power Sources ■ Power-on Password Self test While booting up the computer , self te st is exe cuted aut omatically a nd the following will be displaye d: This message remains on the screen for a few seco[...]

User ’s Manual 9-5 T roubleshooting Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer will auto matically shut down to prevent any damage - in this instance all unsaved data in memory will be lost. AC power If you have trouble turning on the comp u ter with the AC adapt[...]

User ’s Manual 9-6 T roubleshooting Battery If you suspect a problem with the battery , you shoul d check the status of the DC IN in dicator as well as the Battery indicator . Please refer to Chapter 6, Power and Power-up Modes for more information on these indicators, together with general battery operation. Problem Procedure Battery doesn’t p[...]

User ’s Manual 9-7 T roubleshooting Real Time Clock Password Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information. Problem Pro cedure The following message is displayed on the LCD: RTC battery is low or CMOS checksum is inconsistent. Press [F2] [...]

User ’s Manual 9-8 T roubleshooting Internal display p anel Apparent display panel problems may b e related to the computer's setup and configuration - please refer to Chapter 7, H W Setup and Passwords , for further information. Problem Pro cedure No display Press the FN + F5 hot keys to adjust the display priority , and to make sure it is [...]

User ’s Manual 9-9 T roubleshooting Solid S tate Drive Hard disk drive Problem Pro cedure Computer does not boot from hard disk drive Check to see whether that is a floppy diskette in the floppy diskette drive or a CD-ROM/DVDROM in the optical disc drive - if so remove it and try to start the computer again. If this has no effect, check the Boot [...]

User ’s Manual 9-10 T roubleshooting DVD Supe r Multi drive For further information, please refer to Chapter 4, Operating Basics . Problem Pro cedure Y ou cannot access a CD/DVD in the drive Make sure the drive's disc tray is securely closed - press it gently into the computer until it clicks into place. Open the drive's disc tr ay and [...]

User ’s Manual 9-1 1 T roubleshooting USB floppy diskette drive The USB floppy diskette d rive is available o nly as an option. For further information, please refer to Chapter 4, Operating Basics . ExpressCard For further information, please refer to Chapter 8, Optional Devices . Problem Pro cedure Drive does not operate Check the connec tion be[...]

User ’s Manual 9-12 T roubleshooting SD/SDHC memory card, mi niSD/microSD Card For further information, please refer to Chapter 8, Optional Devices . Problem Pro cedure SD/SDHC memory card, miniSD/microSD Card error occurs Remove the SD/SDHC memory card, miniSD/microSD Card from the computer and then reinsert it in order to ensure it is firmly co[...]

User ’s Manual 9-13 T roubleshooting Memory S tick/Memory S tick PRO/Memory S tick PRO Duo For further information, please refer to Chapter 8, Optional Devices . xD picture card For further information, please refer to Chapter 8, Optional Devices . Problem Pro cedure Memory S tick/Memory S t ick PRO/Memory S tick PRO Duo error occurs Remove the M[...]

User ’s Manual 9-14 T roubleshooting MultiMediaC ard For further information, please refer to Chapter 8, Optional Devices . Infrared receiver window If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documen tation supplied with your mouse. Pointing device If you are using a USB mouse, you[...]

User ’s Manual 9-15 T roubleshooting Double-tapping does not work In this instance, you should initiall y try changing the double-click speed setti ng within the Mouse Control utility . 1. T o access this utility , click Sta rt → Control Panel → Hardware and Sound → Mouse icon. 2. Within the Mouse Prope rties window , click the Buttons tab.[...]

User ’s Manual 9-16 T roubleshooting USB mouse Problem Procedure On-screen pointer does not respond to mouse operation In this instance the system might be busy . T ry moving the mouse again after waiting a short while. Check to make sure the T ouchpad isn't enabled. Press the T ouchpad Enable/disab le button below the spacebar . Remove the [...]

User ’s Manual 9-17 T roubleshooting Fingerprint Sensor USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. USB Sleep and Charge functi on Problem Procedure Reading of the fingerprint was not successful. In this instance you should try the fingerprint reading operati o[...]

User ’s Manual 9-18 T roubleshooting When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons. When this ha ppens, disconne ct an external device if some external devices are connected. After that , turn the power of the computer ON/OFF to restor e the [...]

User ’s Manual 9-19 T roubleshooting eSA T A device In addition to the information in this section, p lease also refer to the documentation supplied with your eSA T A device . External devices connected to the compatible port s do not work wh en connecte d to a comp atible port. Some external devices may not work when connected to a compatible po[...]

User ’s Manual 9-20 T roubleshooting Additional mem ory module Please also refer to Chapter 8, Optional Devices , for further information on installing and removing memory modul es. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device. Problem Procedure If there is a[...]

User ’s Manual 9-21 T roubleshooting V olume control External monitor Please also refe r to Chapter 8, Optional Devices , and to the documentation supplied with yo ur monito r for further information. Check within the Win dows Device Manager application to ensure the sound func tion is enabled. If you are still unable to resolve the proble m, con[...]

User ’s Manual 9-22 T roubleshooting Modem No display Try adjusting the contrast and brightness controls on the external monitor . Press the FN + F5 hot key in order to change the display priority and ensure th at it is not set for the internal display panel only . Check to see if the external monitor is connected. When the external monitor is se[...]

User ’s Manual 9-23 T roubleshooting LAN Y ou place a ca ll, but a connection can’t be made Make sure that the settings are correct within your communication application. After making a call you can’t hear a ring Ensure that the communication application's tone or pulse dialling selection feature is set correctly . Communication is cut o[...]

User ’s Manual 9-24 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics . UWB [...]

User ’s Manual 9-25 T roubleshooting HDMI m onitor output function DisplayPort monito r output function Problem Pro cedure No display T ry adjusting the cont rast and b rightness controls on the television. Press the FN + F5 hot key in order to chang e the display priority and ensure th at it is not set for the internal display panel only . If yo[...]

User ’s Manual 9-26 T roubleshooting Video Playback FM tuner TV T uner Problem Pro cedure DVD does not play smoothly when using the Windows Me dia Center of the DVD playing software T ry settin g the configuration in the BIOS setup. However , note that when the BIOS setup configuration is modi fied, the power savin g function of PCI Express beco [...]

User ’s Manual 9-27 T roubleshooting T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance. Before you call Some problems you experience may be related to software or the operating system so it is import a[...]

User ’s Manual 9-28 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia TOSHIBA Australia Pty . Ltd. Information Systems Division 84-92 T alavera Road North Ryde N.S.W . 21 13 Sydney Ger[...]

User ’s Manual 10-1 Chapter 10 Disclaimers This chapter slates the Disclaime r(s) information applicable to TOSHIBA computers. CPU Central Processing Unit ("CP U") Performance Disclaimer. CPU performance in your co mputer pr oduct may vary from specifi cations under the following conditi ons: ■ use of certain external peripheral produ[...]

User ’s Manual 10-2 Disclaimers Under some conditions, your computer product may automatically shut- down. This is a normal protective feat ure designed to reduce the risk of lost data or damage to the product when used outside recommended conditions. T o avoid risk of lost data, always make back-up copies of data by periodically storing it on an[...]

User ’s Manual 10-3 Disclaimers Battery Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts. Pu blished battery life numbers are achieved on select mod els[...]

User ’s Manual 10-4 Disclaimers Wireless LAN The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and so ftware/hardware configurations.Th e actual transmission speed w[...]

User ’s Manual 10-5 Disclaimers LCD Brightness and Eye St ain Y our display panel has a brightness approaching th at of a TV device. We recommend that you adjust the bright ness of yo ur LCD to a comfortable level to prevent possible strain on your eyes. TV T uner TV T uner will function only in th e co untry where the computer was purchased. Saf[...]

User ’s Manual Appendixes-1 Appendixes T able of Content s Appendix A S pecifications................... ...................... ....................... ................ A-1 Appendix B Display Controller ... ....................... ...................... ....................... .. B-1 Appendix C V .90/V .92 ........ ....................... .......[...]

User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’ s te chnical specifications. Environme nt al require ment s Power Requirement s Operating Non-oper ating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 80% 10% to 90% Altitude (from sea level) 0 to 3,000 meters 0 to 10,000 me ters A[...]

User ’s Manual A-2 Built-in Mod em The ability of th is feature is d epending on th e model you pu rchased. Network control unit (NCU) T ype of NCU AA T ype of line T elephone line (an alog only) T ype of dialing Pulse To n e Control command A T commands EIA-578 commands Monitor function Computer’s speaker Communication specification s Communic[...]

User ’s Manual B-1 Appendix B Display Controller Display controller The display controller in terprets software commands into hardware commands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external m[...]

User ’s Manual C-1 Appendix C V .90/V .92 The TOSHIBA internal modem uses V .90 technolog y . The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provi der that su pports V .90/V .92. As w ith any modem, the actual throughput (speed of data transfer) depends on analog telephone line co n[...]

User ’s Manual C-2 T able Result cod es for a V .90 connection *EC stands for the Error Control me thod, which appears only when the extended result codes configuration op tion is enabled . EC is replaced by one of the following symbols, depending on the error control method used. No. Result code Description 70 CONNECT 32000 EC* Connection at 3 2[...]

User ’s Manual C-3 A T Command -V90=* V .90 Dia l Line Rate -V90 sets the maximum V .90 downstream that the modem attempts to connect -V90=0 V .90 di sabled -V90=1 V .90 enable d: automatic speed selection - maximum modem speed(default)[...]

User ’s Manual D-1 Appendix D Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Form Factor Mini Card Compati bility ■ IEEE 802.1 1 S tandard for Wireless LANS ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The ‘Wi-Fi CERTIFIED?[...]

User ’s Manual D-2 Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purcha sed ■ T yp e of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been design ed for operation in the licens[...]

User ’s Manual D-3 T able Wireless IEEE 802.1 1 Channels Sets (Revision B and G) When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN infrastructure, the Wireless LAN card will automatical ly start operation at the channel identified by the Wireless LAN Ac ces[...]

User ’s Manual D-4 T able Wireless IEEE 802.1 1 Channels Sets (Revision A) Frequency Range Channel ID 5 150-5850 MHz Note 36 5180 40 5200 44 5220 48 5240 52 5260 56 5280 60 5300 64 5320 100 5500 *3 104 5520 *3 108 5540 *3 11 2 5560 *3 11 6 5580 *3 120 5600 *3 124 5620 *3 128 5640 *3 132 5660 *3 136 5680 *3 140 5700 *3 149 5745 *3 US only *4 153 5[...]

User ’s Manual D-5 *1 Factory-set defaul t channels *2 Refer to the sheet Approved Countries/Regi ons for use for the countries/regions that in which these channels can be used. *3 These channels are ava ilable to A/B/G/N combo type only . *4 Available Area: US (USA, CANADA) only .[...]

User ’s Manual E-1 Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Mi nimum 0.75 mm 2 Current rating: Minimum 2.5 amperes V oltage rating[...]

User ’s Manual E-2 Certification agencies In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV -F . For the United S tates and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three p in plug configuration must be 6-15P (250V) or 5-15[...]

User ’s Manual E-3 USA Australia Europe United Kingdom Canada China[...]

User ’s Manual F-1 Appendix F T OSHIBA PC Health Monitor The TOSHIBA Health Monitor soft ware program monitors computer system functions such as power consumpt ion, the cooling system and HDD Drop sensor . It al erts users of specific system conditi ons via pop-up messag es. It also tracks the usages of the comput er and related devi ces, logging[...]

User ’s Manual F-2 The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its st andard li mited warranty in any way . TOSHIBA's st anda rd limited warranty terms and limitations apply . Visit http://www .warranty .toshiba.com for de tails. St arting the TOSHIBA PC Health Mo nitor The TOSHIBA PC Hea[...]

User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface ASCII: American S tandard Code for Information Interchange BIOS: basic input/o [...]

User ’s Manual Glossa ry-2 Glossary GPS: Global Positi oning System HD+: High Definition Plus IDE: integrated drive el ectronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode[...]

User ’s Manual Glossa ry-3 Glossary alphanumeric: Keyboard characte rs including letters, numbers and other symbols, such as punctuation ma rks or mathematica l symbols. alternating current (AC): Electric current that reve rses its directi on of flow at regular intervals. analog signal: A signal whose characteristics such as amplitude and frequen[...]

User ’s Manual Glossa ry-4 Glossary buffer: The portion of the computer ’s me mo ry where data is temporarily stored. Buffers often compe nsate for differences in the rate of flow from one device to another . bus: An interface for transmission of signals, data or electric power . byte: The repr esentation of a single char acter . A sequence of [...]

User ’s Manual Glossa ry-5 Glossary comp atibility: 1) The ability of one compu ter to accept and process d ata in the same manner as another comp uter without modifying th e data or the media upon which it is b ein g transferred. 2) the ability of one device to connect to or comm unicate with another system or component. components: Element s or[...]

User ’s Manual Glossa ry-6 Glossary device drive r: A program (called a "driver") that pe rmits a computer to communicate with a device. dialog bo x: A window that accepts user in put to make system settings or record other info rmation. disable: T o turn a computer optio n off. See also enable. Digital Audio: An audio compression stand[...]

User ’s Manual Glossa ry-7 Glossary E echo: T o send back a reflection of the transmitted data to the sending device. Y ou can display th e information on the screen, or output it to the printer , or both. When a computer receives back data it transmitted to a CRT (or other peri pheral device) an d then transmits the data to printer , the printer[...]

User ’s Manual Glossa ry-8 Glossary G gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as cha rts or graphs, to present information. H hard disk: A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold mu[...]

User ’s Manual Glossa ry-9 Glossary I/O: Input/output. Refers to acceptance and transfer of data to and from a computer . I/O devices: Equipme nt used to communicate with the computer and transfer data to and from it. IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. K K: T aken from th[...]

User ’s Manual Glossary-10 Glossary memory: T ypically re fers to the computer 's main memory , where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily , such as RAM, or it can be n onvolatile and h old data permanently , such as ROM. A computer's main memory is RAM. See RAM,[...]

User ’s Manual Glossary-1 1 Glossary operating system: A group of programs that controls the basic operation of a computer . Operating system functions include in terpreting programs, creating data files, and controll ing the transmission and receipt (input/outpu t) of data to and from memory and peripheral device. output: The results of a comput[...]

User ’s Manual Glossary-12 Glossary R Radio frequency interference (RFI ) shield: A metal shield enclosing the printed circuit boa rds of the printer or computer to preven t radio and TV interference. All computer equ ipment generates radio frequency signals. The FCC regulates th e amount of signals a computing device can allow past it s shieldin[...]

User ’s Manual Glossary-13 Glossary soft key: Key combinations that emulate keys on the IBM keyboard, change some con figuration options, stop program execution, and access the nume ric keypad overlay . software: The set of programs, procedures and related documentation associated with a computer system. S p ecifically refers to computer programs[...]

User ’s Manual Glossary-14 Glossary Wi-F i ® : A registered trademark term of the Wi-Fi Allianc e that stands for Wireless Fidelity , and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. window: A porti on of the screen that can display its own application, document or dialo[...]

User ’s Manual Index-1 Index A AC adaptor, 1-8 additional, 1-20 connecting, 3-2 DC IN 19V jack, 2-7 ASCII characters, 5-5 B Battery charging, 6-5 extending ba ttery life, 6-8 indicator, 2-16, 6- 2 Monitoring capacity, 6-7 real time clock, 1-8, 6-4 save mode, 1-13 types, 6-3 Battery Charger, 8-9 Battery pack, 1-8, 2-9 additional, 8-9 replacing, 6-[...]

User ’s Manual Index-2 FN + F5 (Output), 5-3 FN + F6 (Brightness Down), 5- 3 FN + F7 (Brightness Up), 5-4 FN + F8 (Wireless), 5-4 FN + F9 (Touch Pad), 5-4 FN + spac e (Zoom), 5-4 Function buttons, 4-16 Function keys, 5-2 H Hard disk drive automatic power off, 1-13 HDMI, 8-15 Heat dispersal, 1-13 Hibernation Mo de, 1-14 Hot keys, 1-12 Brightness ([...]

User ’s Manual Index-3 user, 6-11 Pointing device Touch Pad, 2-11, 4-1 Ports, 1-8 External monitor, 1-8 USB, 1-8 Power conditions, 6-1 Hibernation Mode, 3-8 indicator, 6-3 panel power on/off, 6- 12 Shut Down mo de (Boot M ode), 3-8 Sleep Mode, 3-10 system auto off, 6-13 turning off, 3 -8 turning on, 3 -7 Problems AC power, 9-5 Analyzing the probl[...]

User ’s Manual Index-4 T TOSHIBA Assist, 1-16 TOSHIBA ConfigFree, 1-17 TOSHIBA Disc Creator, 1- 17, 4-21 TOSHIBA HDD Protection, 1-14 TOSHIBA PC Diag nostic Tool, 1- 15 TOSHIBA support, 9- 27 TOSHIBA Zooming Utility, 1 -15 Touch Pad, 1-8 using, 4-1 U USB device, 1-8 problems, 9-17 USB floppy diskette drive, 8-1 0 problems, 9-11 using, 8-11 UWB, 1[...]