Français dropdown-ico

TP-Link TD-W8980 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation TP-Link TD-W8980. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel TP-Link TD-W8980 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation TP-Link TD-W8980 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation TP-Link TD-W8980 devrait contenir:
- informations sur les caractéristiques techniques du dispositif TP-Link TD-W8980
- nom du fabricant et année de fabrication TP-Link TD-W8980
- instructions d'utilisation, de réglage et d’entretien de l'équipement TP-Link TD-W8980
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage TP-Link TD-W8980 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles TP-Link TD-W8980 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service TP-Link en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées TP-Link TD-W8980, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif TP-Link TD-W8980, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation TP-Link TD-W8980. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Rev: 1.0.0 1910010779[...]

  • Page 2

    COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specific ations may be reproduced in any form or by any means or used to m ake any derivativ[...]

  • Page 3

    FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen erates, uses and can radiate radio frequency energy and, if no[...]

  • Page 4

    National Restrictions This device is intended for home and office use in all EU countries (and ot her countries following the EU directive 1999/5/EC) wit hout any limitation except for the countries m entioned below: Country Restriction Reason/remark Bulgaria None General authorization require d for outdoor use and public service France Outdoor use[...]

  • Page 5

    This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interfer ence-causing equipment regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Rè glement sur le matériel brouilleur du Canada. Korea Warning Statements: 당해 무선설비는 운용중 전파[...]

  • Page 6

    TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No.: TD-W8980 T rademark: [...]

  • Page 7

    CONTENTS Package C ontents .................................................................................................... 1 Chapter 1. Product O verview ................................................................................... 2 1.1 Overview of the Modem Router ........................................................................[...]

  • Page 8

    4.6.3 Address Rese rvation .......................................................................................................... 42 4.6.4 Conditional Pool ............................................................................................................... .. 43 4.7 Dual Band Selection ................................................[...]

  • Page 9

    4.14.1 Rule ........................................................................................................................... ....... 80 4.14.2 LAN Host ....................................................................................................................... ... 81 4.14.3 WAN Host ............................................[...]

  • Page 10

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1 Package Content s The following contents should be found in your package: ¾ One TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router ¾ One Power Adapter for TD-W8980 N6 00 Wireless Dual Band Gigabit ADSL2 + Modem Router ¾ Quick Installation Guide ¾ One RJ45 cable [...]

  • Page 11

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 2 Chapter 1. Product Overview Thank you for choosing the TD-W89 80 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router . 1.1 Overview of the Modem Router The TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router integrates 4-port Switch, Firewall, NAT-Router and Wireless[...]

  • Page 12

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 3 1.2 Main Features ¾ Complies with IEEE 802.11n to provide a wireless data rate of up to 30 0 Mb p s (2 . 4G H z) + 300Mbps (5GHz). ¾ Four 10/100/1000Mbps Auto-Negotiation RJ45 LAN ports (Auto MDI/MDIX), one RJ11 port. ¾ Provides external splitter. ¾ Adopts Advanced DMT mo[...]

  • Page 13

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4 1.3 Panel Layout 1.3.1 The Front Panel Figure 1-1 The modem router’s LEDs are loca ted on the front panel (View from le ft to right). They indi cate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On The m[...]

  • Page 14

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 5 On Wireless 2.4GHz is enabled but no data is being transmitted. Flash The modem router is sending or re ceiving data over 2.4GHz radio band. (Wireless 2.4GHz) Off Wireless 2.4GHz is disabled. On Wireless 5GHz is enabled but no data is being transmitted. Flash The modem router[...]

  • Page 15

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 6 1.3.2 The Back Panel Figure 1-2 ¾ ADSL : Through the port, you can connect the modem router with the telephone. Or you can connect them by an external separate sp litter. For details, please refer to 2.3 Connecting the Modem Router . ¾ USB1, USB2 : The USB port connects to [...]

  • Page 16

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 7 Chapter 2. Connecting the Modem Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet). ¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors. ¾ TCP/IP protocol on each PC. ¾ Web browser, such as Micr osoft Inte[...]

  • Page 17

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 8 ) Note: The diameter of the screw, 3.5mm<D<6mm, and t he distance of two screws is 122mm. The screw that project from the wall need aro und 4mm based, and the l ength of the screw need to be at least 20mm to withstand the weight of the product. 2.3 Connecting the Modem [...]

  • Page 18

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 9 Figure 2-2[...]

  • Page 19

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 10 Chapter 3. Quick Inst allation Guide 3.1 Configuring the PC After you directly connect your PC to the modem router TD-W8980 or connect your adapter to a Hub/Switch which has connected to the modem router, you need to co nfigure your PC’s IP address. Follow the steps below [...]

  • Page 20

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 11 Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP) , and then click the Properties button. Figure 3-3 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK .[...]

  • Page 21

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 12 Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above. Now, you can run the Ping command in the comm and pr ompt to verify the net[...]

  • Page 22

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 13 If the result displayed is similar to the screen shown belo w, it means t hat your PC has not connected to the modem router. Figure 3-6 You can check it follo wing the steps below: 1) Is the connection between your PC and the modem router correct? The LEDs of LAN port which [...]

  • Page 23

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 14 Figure 3-8 ) Note: 1) Do not mix up the user name and password with your ADSL account user name and password which are needed for PPP connections. 2) If the above screen does not pop up, it means that your Web-br owser has been set to a proxy. Go to Tools menu → Internet O[...]

  • Page 24

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 15 Figure 3-9 3. Change the VPI/VCI values which are used to define a unique path for your connection. If you have been given specific settings fo r this to configuration, type in the correct values assigned by your ISP. Click Next .[...]

  • Page 25

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 16 Figure 3-10 4. Please select the Co nnection Type given by your ISP . Here we use PPPoE as an example. Click Next . Figure 3-11 5. Enter the Username , Password and Confirm pass word given by your ISP, and then click Next . Figure 3-12 6. Configure the basic parameters for 2[...]

  • Page 26

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 17 Figure 3-13 7. Configure th e basic parameters for 5GHz wireless network in the following screen as shown in Figure 3-14, and then click Next . Figure 3-14 8. On this page, please confirm all parameters. Click Back to modify or click the Save button to save your configuratio[...]

  • Page 27

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 18 Figure 3-15 9. You will see the Complete screen below, click Finish to complete these settings. Figure 3-16[...]

  • Page 28

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 19 Chapter 4. Configuring the Modem Router This chapter will show each Web page's key function and the c onfiguration way. 4.1 Login After your successful login, you will see the twenty main menus on the left of the Web-based utility. On the right, there are the corres pon[...]

  • Page 29

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 20 Figure 4-1 4.3 Quick Setup Please refer to Section 3.2 Quick Installation Guide . 4.4 Operation Mode Choose “ Operation Mode ”, and you will see the screen as shown in Figure 4-2. Select your desired mode and then click Save .[...]

  • Page 30

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 21 Figure 4-2 ¾ ADSL Modem Router Mode: In this mode, the device enables multi-users to share Internet via ADSL using its ADSL port and share it wirelessly at 300Mbps wireless 802.11n speeds. ¾ Wireless Router Mode: In this mode, the device enables multi-users to share Intern[...]

  • Page 31

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 22 4.5.1 WAN Settings Choose “ Netw ork ” Æ “ WAN Settings ”, and you will see the WAN Port Information Table in the screen similar to Figure 4-3, which describes the WAN por t settings and the r elevant manipulation to each interface. There are five different configur[...]

  • Page 32

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 23 4.5.1.1 Static IP Select this option if your ISP prov ides static IP information to yo u. You should set static IP address, IP subnet mask, and gateway address in the screen below. Figure 4-5 ATM Configuration: ¾ VPI (0~255): Identifies the virtual path between endpoints in[...]

  • Page 33

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 24 ¾ Subnet Mask: Enter the subnet Mask in dotted-decim al notation provided by your ISP, usually is 255.255.255.0. ¾ Default Gateway (Optional): Enter the gateway IP address in dotted-decimal notation provided by your ISP. ¾ DNS Server/ Secondary DNS Server: Here you can se[...]

  • Page 34

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 25 Figure 4-6 Click Advance , advanced selections for WAN Service Setup can be shown. ¾ MTU (bytes): Maximum Transmission Unit Size. Check this box then you can change the MTU size. The default MTU value is 1500 Bytes. It is not re commended that you change the default value u[...]

  • Page 35

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 26 ¾ Get IP with Unicast: This is disabled by default. The minority of DHCP Server of ISP will not support to enable this. When the Route is connected right but IP cannot get, you can select this box. ¾ Set DNS Server manually: Choose “Set DNS Server manually”, you can se[...]

  • Page 36

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 27 Figure 4-7 ¾ PPP Username/Password/Confirm Password : Enter the User Name, Password and Confirm Password provided by your ISP. These fields are case-sensitive. ¾ Connection Mode: For PPPoE connection, you can select Always on or Connect on demand or Connect manually . Conn[...]

  • Page 37

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 28 ¾ IPv6 Default Gateway: Select a WAN connection from the dr op-down list as the IPv6 def ault gateway. Click Advance , advanced selections for WAN Service Setup can be shown. ¾ Service Name/Server Name : Enter the Service Name and Server Name if it was provided by your ISP[...]

  • Page 38

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 29 Figure 4-8 4.5.1.5 IPoA If your ISP provides an IPoA connection, select IPoA option for the Connection T ype on the screen.[...]

  • Page 39

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 30 Figure 4-9 ¾ IP Address/Subnet Mask: Enter the IP Address and Subnet Mask provided by ISP. If you forget, you can ask your ISP. ¾ DNS Server/Secondary DNS Server: Type in your preferred DNS server. ¾ Default Gatewa y: select a WAN Interface from the drop-down list as the [...]

  • Page 40

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 31 ) Note: After you finish the Internet configuration, please click Save to m ake the settings take e ffe ct. 4.5.2 Interface Grouping Choose “ Network ” Æ “ Interface Grouping ”, you can view all the current groups on this page (shown in Figure 4-11). Figure 4-11 ¾ [...]

  • Page 41

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 32 Click Save to make the entry effective immediately 4.5.3 LAN Settings Choose “ Network ” Æ “ LAN Settings ” menu, and you will see the LAN screen (shown in Figure 4-13). Please configure the parameters for LA N ports according to the descriptions below. Figure 4-13 [...]

  • Page 42

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 33 • End IP Address: Enter a value for the DHCP server to end with when issuing IP addresses. The End IP Address must be sm aller than 192.168.1.254. The default End IP Address is 192.168.1.254 . • Leased Time: The Leased Time is the amount of ti me in which a network user [...]

  • Page 43

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 34 the amount of time, in hours, then the user will be “leased” this dynamic IPv6 address. After the dynamic IPv6 address has expired, the user will be automatically assigned a new dynamic IPv6 address. The default is 86400 seconds. ¾ Site Prefix Configuration Type: Select[...]

  • Page 44

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 35 ) Note: Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be the same with each other. 4.5.6 ALG Settings Choose menu “ Network ” Æ “ ALG Settings ”, and then you can configure the basic security in the screen as shown in Fi[...]

  • Page 45

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 36 • H323 ALG: To allow H323 clients and servers to transfer data across NAT, click Enable . • SIP ALG: To allow SIP clients and servers to transfer data across NAT, click Enable . Click the Save button to save your settings. 4.5.7 DSL Settings Choose “ Advanced Setup ”[...]

  • Page 46

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 37 ) Note: You could also use other VPN Routers to se t VPN tunnels with TD-W8980. TD-W8980 supports up to 10 VPN tunnels simultaneously. Click Add New Connection in Figure 4-21 and then you will enter the screen shown in Figure 4-22. Figure 4-22 ¾ IPSec Connection Name: Enter[...]

  • Page 47

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 38 ¾ Tunnel access from local IP addresses: Choose Subnet if you want the Whole LAN t o join the VPN network, or else choose Single Address if you want single IP to join the VPN network. ¾ IP Address for VPN: Enter the IP address of your LAN. (For example: Input 192.168.1.1 i[...]

  • Page 48

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 39 Figure 4-23 ¾ Mode: Select Main Mode to configure the st andard negotiation parameters for IKE phase1. ¾ Aggressive Mode: Select Aggressive Mode to configur e IKE phase1 of the VPN Tunnel to carry out negotiation in a shorter amount of time. (Not Recommended-Less Secure) )[...]

  • Page 49

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 40 Click any of them, and you will be able to configure the corre sponding function. 4.6.1 DHCP Settings Choose menu “ DHCP Server ” Æ “ DHCP Settings ”, you can configure the DHCP Server on the page as shown in Figure 4-24.The modem router is set up by default as a DH[...]

  • Page 50

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 41 ¾ Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers. ¾ DHCP Relay: Select Relay , then you will see the next screen, and the modem router will work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data[...]

  • Page 51

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 42 4.6.3 Address Reservation Choose menu “ DHCP Server ” Æ “ Address Reservation ”, you can vie w and add a reserved address for clients via the next screen (shown in Figure 4-26).When you specify a reserved IP address for a PC on the LAN, that PC will always receive t[...]

  • Page 52

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 43 4.6.4 Conditional Pool Choose menu “ DHCP Server ” Æ “ Conditional Pool ”, you can see the next screen (shown in Figure 4-28). This page displays vendor class se ttings and allows you to set parameters for vendor class by clicking corresponding buttons. Figure 4-28 [...]

  • Page 53

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 44 4.7 Dual Band Selection Choose menu “ Dual Band Selection ”, and you can choose the wo rking frequency for your modem router. It is recommended that your co mputers and devices run ning video and voice applications use the 5GHz band, while your guest access and co mputer[...]

  • Page 54

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 45 Figure 4-31 ¾ SSID: Wireless network name shared among all p oint s in a wireless network. The SSID must be identical for all devices in the wireless network. It is case -sensitive and must not exceed 32 characters (use any of the char acters on the keyboard). Make su re th[...]

  • Page 55

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 46 ) Note: If 11b onl y , 11g only , or 11bg mixed is selected in the Mode field, the Channel Width selecting field will turn grey and the value w ill become 20M, which is unable to be changed. ¾ Enable SSID Broadcast: When wireless clients survey the local a rea for w i reles[...]

  • Page 56

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 47 Figure 4-32 ¾ WPS: Enable or disable the WPS function here. ¾ Current PIN: The current value of the modem rout er's PIN is displayed here. The default PIN of the modem router can be found in the label or User Guide. ¾ Restore PIN: Restore the PIN of the modem router [...]

  • Page 57

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 48 Figure 4-33 Step 2: Press and hold the WPS button of the client device directly. Step 3: The Wi-Fi Protected Setup LED flashes for tw o minutes during the Wi-Fi Protected Setup process. Step 4: When the W PS LED is on, the client device has successfu lly connected to the mod[...]

  • Page 58

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 49 ) Note: 1) The WPS LED on the modem r outer will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be c onfigured if the Wireless Functi on of the modem router is disabled. Please make sure the Wireless Func tio[...]

  • Page 59

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 50 which is labeled on the bottom of the Router or can be found in Figure 4-32. • Group Key Update Period: Specify the group key update int erval in seconds. The value should be 30 or above. Ente r 0 to disable the update. ¾ WPA/WPA2 – Enterprise: It’s based on Radius Se[...]

  • Page 60

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 51 64-bit: You can enter 10 hexadecimal di gits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 5 ASCII characters. 128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 13 ASCII characters. ) Note: If you d[...]

  • Page 61

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 52 Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example: 00:1D:0F:11:22:33. 2. Give a simple description for the wireless station in the Description fie ld. For example: Wireless station A. 3. Select Enabled or Disabled for this entry on the Status drop -down [...]

  • Page 62

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 53 Figure 4-38 ¾ Transmit Power: Here you can specify the transmit power of modem router. You can select High, Middle or Low which you would like. High is the default setting and is recommended. ¾ Beacon Interval: Enter a value between 25- 1000 milliseconds for Beac on Interv[...]

  • Page 63

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 54 4.8.6 Wireless Status Choose menu “ Wireless 2.4GHz ” Æ ” Wireless Status ”, you can see the MA C Address, Current Status, Received Packets and Sent Packets for each connected wireless station. Figure 4-39 ¾ MAC Address: The connected wireless station's MAC ad[...]

  • Page 64

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 55 Figure 4-40 ¾ SSID: Wireless network name shared among all p oint s in a wireless network. The SSID must be identical for all devices in the wireless network. It is case -sensitive and must not exceed 32 characters (use any of the char acters on the keyboard). Make su re th[...]

  • Page 65

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 56 Enable SSID Broadcast checkbox, the Wireless Router w ill broadcast its name (SSID) on the air. Click Save to save yo ur settings. 4.9.2 WPS Settings This section will guide you to add a new wire less device to an existing network quickly by WPS (also called QSS ) function. [...]

  • Page 66

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 57 You can also keep the default WPS Status as Enabled and click the Add device button in Figure 4-41, then Choose “ Press the button of the new device in two minutes ” and click Connect . (Shown in the following figure) Figure 4-42 Step 2: Press and hold the WPS button of [...]

  • Page 67

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 58 III. Enter the modem router’s PIN on your client device Use this method if your client device as ks for the modem router’s PIN number. Step 1: On the client device, enter the PIN number listed on the modem router’s Wi-Fi Protected Setup screen. (It is also labeled on t[...]

  • Page 68

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 59 ¾ Disable Wireless Security: If you do not want to use wire less security, check this radio button. But it’s strongly recommended to choose one of the following m odes to enable security. ¾ WPA/WPA2-Personal - It’s the WPA/WPA2 authenticat ion type based on pre-shared [...]

  • Page 69

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 60 • Authentication Type: You can choose the type for the WPA/WPA2-Personal security on the drop-down list. The default setting is Auto , which can select WPA-PSK or WPA2-PS K authentication type autom atically based on the wireless station's capability and request. • [...]

  • Page 70

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 61 Figure 4-46 To add or modify a MAC Address Filtering entry, follo w these instructions: 5. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example: 00:1D:0F:11:22:33. 6. Give a[...]

  • Page 71

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 62 4.9.5 Wireless Advanced Choose menu “ Wireless 5GHz ” Æ ” Wireless Advanced ”, you can configure the ad vanced settings of your wireless network. Figure 4-47 ¾ Transmit Power: Here you can specify the transmit power of modem router. You can select High, Middle or L[...]

  • Page 72

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 63 each other. Wireless devices will be able to comm unicate with the modem router but not with each other. To use this functi on, check this box. Client is olation is disabled by default. ¾ Enable WMM: WMM function can guarantee the packets with high-priority messages being t[...]

  • Page 73

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 64 4.10.1 USB Mass Storage Choose menu “ USB Settings → ” USB Mass Storage ”, you can configure a USB disk drive attached to the modem router and view volume and share properties such as share name, capacity, status, and action, et c on this page as shown below. Figure [...]

  • Page 74

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 65 Figure 4-50 To add a new user account, please follow the steps below: 1. Choose the i ndex from the drop-down list of Choose Index . 2. Self-define a New User Name . 3. Enter the password in the New Password field. 4. Re-enter the password in the Confirm Passw ord field. 5. [...]

  • Page 75

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 66 Figure 4-51 ¾ Server Status: Indicates the Storage Sharing's current status. ¾ Anonymous access to all the volumes: This function is enabled by default, so users can access all activated volumes of Storage Sharin g without accounts. If you want to add a shared folder [...]

  • Page 76

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 67 Figure 4-52 2. Click the Brow se button, and then select the Sele ct Volume from the drop-down list. 3. Enter display name of the share folder in Share Name filed. 4. Click the Apply button to apply the settings. You can click the upper button to go to the upper folder Click[...]

  • Page 77

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 68 Figure 4-53 ¾ Server Status: Indicates the FTP Server's current status. ¾ Internet Access: If Internet Access is enabled, user(s) in public network can access FTP server via Internet Address . ¾ Internet Address: If Internet Access is enabled, WAN IP will be displaye[...]

  • Page 78

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 69 Figure 4-54 2. Click the Brow se button, and then select the Sele ct Volume from the drop-down list. 3. Enter display name of the share folder in Share Name filed. 4. Click the Apply button to apply the settings. You can click the upper button to go to the upper folder. Clic[...]

  • Page 79

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 70 ¾ Server Name : The name of this Media Server. To add a new share folder for your media server, please follow the instructions below: a) Click Add Ne w Folder button, and you will see the screen as shown in Figure 4-56. b) Enter the name of the share folder in Share Name fi[...]

  • Page 80

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 71 4.11 Route Settings Choose “ Route Settings ”, it includes four menus : Default Gateway , Static Route IPv6 Static Route and RIP Settings . The detailed descriptions are provided below. 4.11.1 Default Gate way Choose “ Route Settings ” Æ “ Default Gatewa y ”, yo[...]

  • Page 81

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 72 Figure 4-60 2. Enter the following data: ¾ Destination IP Address: The Destination IP Addr ess is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask: The Subnet Mask determines which portion of an IP Address is the network portion, [...]

  • Page 82

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 73 To add a new entry , follow the instructions below. 1. Click the Add New button in Figure 4-61, and you will see the screen as shown in Figure 4-62. Figure 4-62 2. Enter the following data: ¾ Destination IPv6 Address: The Destination IPv6 Address is the address of the netwo[...]

  • Page 83

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 74 Figure 4-63 ) Note: RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 4.12 Forwardi ng There are four submenus under the Forwarding menu: Virtual Servers , Port Triggering , DMZ and UPnP . Click any of them, and you will be able to configur[...]

  • Page 84

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 75 ¾ Protocol : The protocol used for th is application, either TCP , UDP , or All (all protocols supported by the modem router). ¾ Statu s : The status of this entry , "Enabled" m eans the virtual server entry is enabled. ¾ Edit : T o modify or delete an existing [...]

  • Page 85

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 76 4.12.2 Port Triggering Choose menu “ Forwarding ” → ” Port Triggering ”, you can view and add port triggering in the next screen (shown in Figure 4-66). Some applications require multiple connections, like Internet games, video conferencing, Internet telepho ning a[...]

  • Page 86

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 77 ¾ Trigger Protocol : The protocol used for Trigger Ports, either TCP , UDP , or All (all protocols supported by the modem router). ¾ Open Port : The port or port range used by the remote system when it responds to the outgoing request. A respons e using one of these ports [...]

  • Page 87

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 78 Figure 4-68 To assign a computer or server to be a DMZ server: 1. Click the Enable button. 2. Enter the IP address of a local PC that is set to be DMZ host in the DMZ Host IP Address field. 3. Click the Save button. 4.12.4 UPnP Choose menu “ Forwarding → UPnP ”, and th[...]

  • Page 88

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 79 Click the Enable button to enable UPnP. Click the Disable button to disable UPnP. Click the Refresh button to update the Curr ent UPnP Settings List. 4.13 Parental Control Choose menu “ Parental Control ”, and you can configure the paren tal control in the screen as show[...]

  • Page 89

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 80 4.14 IPv4 Firewall There are four submenus under the Fi rewall menu: Rule , LAN Host , WAN Host and Schedule . Click any of them, and you will be able to configure the corre sponding function. 4.14.1 Rule Choose menu “ Firewall ” → “ Rule ”, and then you can view a[...]

  • Page 90

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 81 The methods to add a new rule: 1. Click the Add New button and the next screen will pop up as shown in Figure 4-72. 2. Give a name (e.g. Rule_1) for the rule in the Description field. 3. Select a host from the LAN Host drop-down list or choose “ Add LAN Host ”. 4. Select[...]

  • Page 91

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 82 ¾ Edit: To modify an existing entry. To add a new entry, please follow the steps below. 1. Click the Add New button. 2. In the Mode field, select IP Address or MAC Address. z If you select IP Address, please follow the steps below: 1) In Description field, create a unique d[...]

  • Page 92

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 83 Figure 4-75 1) In Description field, create a unique description for the host (e.g. Host_1). 2) In IP Address field, enter the IP address. If you select MAC Address , the screen shown is Figure 4-76. Figure 4-76 1) In Description field, create a unique description for the ho[...]

  • Page 93

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 84 4.14.4 Schedule Choose menu “ Firewall ” → “ Schedule ”, and then you can view and set a Schedule list in the next screen as shown in Figure 4-78. Figure 4-78 ¾ Description : Here displays the description of the sc hedule and this description is unique. ¾ Edit : [...]

  • Page 94

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 85 Click the Delete Selected button to delete the slected entries in the table. 4.15 IPv6 Firewall There are four submenus unde r the I Pv6 Firewall menu: IPv6 Rule , IPv6 LAN Host , IPv6 WAN Host and IPv6 Schedule . Click any of them, and you will be able to configure the corr[...]

  • Page 95

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 86 Figure 4-81 2. Give a name (e.g. Rule_1 ) for the rule in the Description field. 3. Select a host from the IPv6 LAN Host drop-down list or choose “ Add IPv6 LAN Host ”. 4. Select a target from the IPv6 WAN Host drop-sown list or choose “ Add IPv6 WAN Host ”. 5. Selec[...]

  • Page 96

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 87 To add a new entry, please follow the steps below. 1. Click the Add New button, and you will see the screen as shown in Figure 4-83. Figure 4-83 2. Create a uni que name for the host (e.g. Host_1) in the Description field. 3. Enter an IPv6 address in the IPv6 Address field. [...]

  • Page 97

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 88 Figure 4-85 2. Create a unique description for the host (e.g. Host_1) in the Description field. 3. Enter an IPv6 address in the IPv6 Address field. 4. Enter the prefix length of the IPv6 address in the Prefix Length field. 5. Click the Save button to save the settings. Click[...]

  • Page 98

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 89 Figure 4-87 2. Create a uni que description for the schedule (e.g. Schedule_1) in Description field. 3. Select the day or days you need in Appl y To field. 4. In time field, you can select all day-24 hours or you may enter the Start Time and Stop Time in the corresponding fi[...]

  • Page 99

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 90 ¾ Mechanism: Select a type for IPv6 tunnel from th e drop-down list. DS-Lite, 6RD and 6to4 are supported. 1) DS-Lite This type is used in the situati on that your WAN connection is IP v6 while LAN connection is IPv4. Select DS-Lite, and you will see the screen as shown in F[...]

  • Page 100

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 91 ¾ Configuration Type: Select a configuration type for th is tunnel. Auto means to obtain the following parameters automatically while Manual means you set them manually. If Auto is selected, only Dynamic IP connection can be selected from the drop-down list. ¾ IPv4 Mask Le[...]

  • Page 101

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 92 Figure 4-92 ¾ Enable Bandwidth Control: Check this box so that the B andwidth Control settings can take effect. ¾ Line Type: Select the right type for you network co nnection. If you don’t know how to choose, please ask your ISP for the information. ¾ Total Upstream Ban[...]

  • Page 102

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 93 3. Click the Save button. Click the Enable/ Disable Selected button to make selected entries enabled or disabled. Click the Delete Selected button to delete selected entries. 4.18 IP&MAC Bindi ng There are two submenus under the IP &MAC Binding menu: Binding Settings[...]

  • Page 103

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 94 To add IP & MAC Binding entries, follow the steps below. 1. Click the Add New button as shown in Figure 4-94. 2. Enter the MAC Address and IP Address. 3. Select the Bind checkbox. 4. Click the Save button to save it. To modify or delete an existing entry, follow the step[...]

  • Page 104

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 95 Figure 4-97 ¾ Service Provider: This field displays the service provider of DDNS. ¾ Domain Name: Enter the Domain name you received from dynamic DNS service provider. ¾ Username & Password: Type the “User Name” and “Password” for your D DNS account. ¾ Enable [...]

  • Page 105

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 96 4.21 System T ools Choose menu “ System Tools ”, and you can see the s ubmenus under the main menu: System Log , Time Settings , Manage Control , CWMP Settings , SNMP Settings , Backup & Restore , Factory Defaults , Firm ware Upgrade , Reboot and Statistics. Click an[...]

  • Page 106

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 97 Figure 4-100 ¾ Save Locally: If Save Locally is selected , events will be recorded in the local memory. ¾ Minimum Level: Select the Minimum level in the drop-down list, for the Minimum Level, all logged events above or equal to the selected level will be displayed. ¾ Save[...]

  • Page 107

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 98 3. Enter the Time in Hour/Minute/Second format. 4. Click Save . To set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server 1 or NTP Server 2 . 3. Click the Get GMT butto n to get system time from In ternet if you have connecte[...]

  • Page 108

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 99 Figure 4-103 ¾ CWMP: Select enable the CWMP function. ¾ Inform: Enable or disable the function. If enabl ed, the information will be informed to ACS server periodically. ¾ Inform Interval: Enter the interval time here. ¾ ACS URL: Enter the website of ACS whic h is provid[...]

  • Page 109

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 100 Figure 4-104 An SNMP Agent is an application running on the modem rout er that performs the operational role of receiving and processing SNMP messages, sending responses to the SNMP manager, and sending traps when an event occurs. So a rout er contains SNMP "agent"[...]

  • Page 110

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 101 Figure 4-106 Click the Restore button to reset all configuration settings to their default values. • The default User Name : admin • The default Password : admin • The default Subnet Mask : 255.255.255.0 ) Note: All changed settings will be lost when defaults are rest[...]

  • Page 111

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 102 ) Note: 1) New firmwar e vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware u nle ss the new firmware has a new featur e you want to use. However, when ex perie ncing problems caused by the modem router ra[...]

  • Page 112

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 103 Figure 4-109 ¾ Statistics Status: Enable or Disable. The default value is disabled. To enable it, click the Enable . If it is disabled, the func tion of DoS protection in Securi ty settings will be disabled. ¾ Statistics Interval (5-60): The default value is 10. Select a [...]

  • Page 113

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 104 Appendix A: Sp ecifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G.992.3, ITU G.992.5, IEEE 802.11b, IEEE 802.11g, I EEE 802.11n, IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA, PPPoE, SNTP, HTTP, DHCP, ICMP, NAT Safety & Emission FCC, CE Ports Four 10/[...]

  • Page 114

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 105 Appendix B: T roubleshooting T1. How do I restore m y modem router’s configuration to its factor y default settings? With the modem router powered on, press and hold the RESET button on the rear pa nel for 8 to 10 seconds before releasing it. ) Note : Once the modem route[...]

  • Page 115

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 106 z Select Obtain an IP address automatically and Obtain DNS server addre ss automatically . Then click OK . For Windows 8 z Move your mouse to the lower right corner and you will see Search icon in the Popups. Go to “ -> Apps ”. Type Control Panel in the search box an[...]

  • Page 116

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 107 Now, try to log on to the Web-based configur ation page again after the above settings have been configured. If you still cannot acce ss the configuration page, please restore your modem router’s factory default settings and re configure your modem router following the in[...]

  • Page 117

    TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 108 Appendix C: T echnical Support Technical Support  For more troubleshooting help , go to: http://www.tp-link.com/e n/support/faq  T o do wnload the latest Firmware, Driver , Utility and User Guide, go to: http://www .tp-link .com/en/support/do wnload  For all other [...]