Français dropdown-ico

Tyan Computer Transport FT48 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Tyan Computer Transport FT48. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Tyan Computer Transport FT48 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Tyan Computer Transport FT48 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Tyan Computer Transport FT48 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Tyan Computer Transport FT48
- nom du fabricant et année de fabrication Tyan Computer Transport FT48
- instructions d'utilisation, de réglage et d’entretien de l'équipement Tyan Computer Transport FT48
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Tyan Computer Transport FT48 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Tyan Computer Transport FT48 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Tyan Computer en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Tyan Computer Transport FT48, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Tyan Computer Transport FT48, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Tyan Computer Transport FT48. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    T ransport FT48 B4985 Service Engineer ’ s Manual[...]

  • Page 2

    [...]

  • Page 3

    i Preface Copyright This publication, including all photog raphs, illustrations, and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any material contained herein, may be reproduced without written consent o f the manufacturer . Copyright 2007 V ersion 1.0 Disclaimer Information containe[...]

  • Page 4

    ii Federal Communicat ions Commission Notice for the USA Compliance Information S tatement (Declaration of Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rules Operation is subject to the following condi ti ons: 1) This device ma y not cause harmful inte rference, and 2) This device must accept any interference [...]

  • Page 5

    iii About this Manual This manual provides you with inst ructions on installing your FT48- B4985, and consists of the following sections: Chapter 1: Provides an Introduction to the FT48-B4985 bare- bone, packing list, describes the external compo- nents, gives a table of key components, and provides block diagrams of the system. Chapter 2: Covers p[...]

  • Page 6

    iv Safety Informati on Before installing and using the FT48-B49 85, t ake note of the following precautions: • Read all instructions carefully . • Do not place the u nit on an unstable surface, cart, or stand. • Do not block the slots or openings on the unit which are provided for ventil ation. • Only use the power source indicated on the m[...]

  • Page 7

    v T able of Content s Chapter 1: Overview 1.1 About the TYAN Transport FT 48-B4985............... ... .... ... ... 1 1.2 Product Model ................ .... ... ... ....................... ... ... ... .... ... ... 2 1.3 Features ................ ... ... ....................... ... ... .... ... ... ... ... .......... 3 1.4 Unpacking ................[...]

  • Page 8

    vi Chapter 3: Replacing Pre-installed Components 3.1 Introduction ........................ ...................... ........................ 55 3.1.1 Work Area ................ .......................... ........................ 55 3.1.2 Tools ..... .......................... .......................... ................. 55 3.1.3 Precautions .. ......[...]

  • Page 9

    Chapter 1: Overview 1 Chapter 1: Overview 1.1 About the TY AN T ransport FT48-B4985 Congratulations on your pu rchase of the TY AN Tran sp ort TM FT48-B4985, a highly- optimized rack-mountable bareb one system. The T ranspor t TM FT48-B4985 is designed to support the latest four AMD ® Opteron™ 8000 series 1207-pin pro- cessor , p roviding a rich[...]

  • Page 10

    2 Chapter 1: Overview 1.2 Product Model B4985F4 8V8HR (Rackmou nt) B4985F48V8HR ( T ower) Model Supported HDD type & quantity Sto ra ge backplane Power supply B4985F48V8HR SA T A/SA T A2 (8) (SAS ready) 8-port SAS/SA T A 1 140W (2+1) redundant, hot swap[...]

  • Page 11

    Chapter 1: Overview 3 1.3 Features Enclosure • Industry 19” ra ck-mountable 4U & Pedestal convertible chassis • S torage bays -(3) 5.25” Driver bays -(8) 3.5” HDD bays • Dimensions: -D 27.5 x W 16.8 x H 6.9 inch -D 700 x W 427 x H 176 mm Processors • Supports Quad AMD ® 8000 Opteron™ Socket F processors Chipset • NVIDIA nForc[...]

  • Page 12

    4 Chapter 1: Overview 1.4 Unpacking This section describes the FT48-B4985 p ackage contents and accessories.Open the box carefully and ensure that all component s are present and undamaged. 1.4.1 Box Content s Component Description Industry standard 4U chassis with eight HDD bays and th ree further 5.25-inch device bays T yan Thunder n4250QE S4 985[...]

  • Page 13

    Chapter 1: Overview 5 (6) system cooling fans (pre-installed) 120 x 120 x 3 8 mm Component Description[...]

  • Page 14

    6 Chapter 1: Overview 1.4.2 Accessories If any items are m issing or appear damaged, con tact your retailer or browse to TY AN ’s Web site for service: http://www .tyan.com. The Web site also provides information on other TY AN products, plus F A Qs, compatib ility lists, BIOS settings , and more. 4 x Chassis foot stands (inclu ding four screw s)[...]

  • Page 15

    Chapter 1: Overview 7 HDD Screws FDD Cable 5 x Long Card Holders (including five screws) Sliding Rail Kit Screws & Small Brackets 2 x Mounting Ears (including six screws) FDD Front Pane l Rail assembly Security Tab (including two screws)[...]

  • Page 16

    8 Chapter 1: Overview 1.5 About the Product This section cont ains hardware diagrams and a block diagram of the F T48-B4985 system. 1.5.1 System Front V iew and Front Panel See the diagram below for d etails of the front pa nel indicators and switches. ID LED LAN2 LED HDD/IDE LED Power LED LAN1 LED USB ports Reset button Power button ID button LED [...]

  • Page 17

    Chapter 1: Overview 9 1.5.2 System Rear V iew NOTE : The buzzer so unds during power failure or abnor mal condition. Press the Redundant PSU reset butto n to return the power supply unit s to their default states. On the re ar of the FT48-B4 985, two screw ho les are available for you to secure the chassis lid with two scr ews. By default, the unit[...]

  • Page 18

    10 Chapter 1: Overview 1.5.3 System T op View for F AN LEDs 1.5.4 Front LEDs LED Color Description FA N 1 / FA N 2 / FA N 3 / FA N4/F AN5/F AN6 LED Green Fan is functioning normally . Red Fan fail. LED Color St ate Description Power Green OFF ON OFF Power ON Power OFF HDD/ IDE Green OFF Blinking OFF HDD/ DVD-ROM access activity No disk activity LAN[...]

  • Page 19

    Chapter 1: Overview 11 1.5.5 Rear I/ O LEDs LED St atus Color Description RJ45 Li nkage/ Activity (Left Side) Green Green OFF ON Blinking OFF 10Mb/100Mb/1000Mb linked 10Mb/100Mb/1000Mb activity No LAN linked RJ45 Li nkage/ Activity (Right Side) Y ellow Green OFF ON ON OFF 1000Mb linked/ activity 100Mb linked/ activity 10Mb mode or No LAN linked ID [...]

  • Page 20

    12 Chapter 1: Overview 1.5.6 Motherboard La yout[...]

  • Page 21

    Chapter 1: Overview 13 1.5.7 Jumpers & Connectors Jumper/Connector Funct ion J1 SMBUS Connector J14 Fan Connector (for barebone use onl y) J20 Clear CMOS Jumper - Pin 2-3 closed: Normal (Default) - Pin 1-2 closed: Clear J22 NMI Header J30/J95 USB Front Panel Connector J30: USB2 J95: USB3 J101 COM2 Header J1 15 Front Panel Header JP1 RI Header J[...]

  • Page 22

    14 Chapter 1: Overview 1.5.8 Motherboard Block Diagram[...]

  • Page 23

    Chapter 1: Overview 15 1.5.9 Syste m Internal View 3 4 5 6 13 8 9 14 1 10 12 2 15 7 11 1. Me mory slots 2. CPU sock et s 3. PCI-E x16 slot s 4. PCI s lot 5. PCI-E x4 slot s 6. SAS/SA T A cables 7. USB cable 8. DVD-ROM Cabl e 9. Syste m fans T op (right to left): F AN1/3/5 Bottom (right to left): F AN2/4/6 10. SAS/SA T A backplane 1 1 1. SAS/SA T A [...]

  • Page 24

    16 Chapter 1: Overview 1.5.10 FRU List Item Model Number Picture Quantity Description Standa rd Pa rts Motherboard S4985 1 TF-Motherboard; T yan S4985 Chassis Unit CCHA-0180 1 TF-CHASSIS UNIT ; FT48 for AMD 4P Power Supply CPSU-0135 3 FT -PWR ASSY ; 600W , M1W-5600P , ZIPPY CPSU-0131 1 TF-PWR ASSY ; 1 140W , M1W3- 5000, ZIPPY , PSU HOUSING F AN CF [...]

  • Page 25

    Chapter 1: Overview 17 Rack Mount- ing Part CRAL-0070 1 TF-28” RAIL ASSY ; WITH P ACKING for FT48 CRBK-0021 1 TF-FT48_HANDLE _BKT_L_ASSY CRBK-0020 1 TF-FT48_HANDLE _BKT_R_ASSY Cable Set CCBL-0670 2 TF-CABLE ASSY ; L=650MM, SAS CABLE 7PX4, FT48 CCBL-0710 1 TF-LED CO NTROL BOARD CABLE 28P TO 26PX1, 6PX2, L=850MM CCBL-0180 1 TF-CABLE ASSY ; L=870MM,[...]

  • Page 26

    18 Chapter 1: Overview Optional Parts Peripheral Drives & Part s CHDT -0100 1 TF-FT48 Dummy CD-ROM T ray Assy CFDD-0010 1 TF-3.5” FDD, black, Mit sumi D353 M3D LCD Module CLCM-0060 1 TF-LCD module kit for FT series 4U chassis Item Model Number Picture Quantity Description[...]

  • Page 27

    Chapter 2: S e tt ing Up 19 Chapter 2: Setting Up 2.1 Before Y ou Begin This chapter explains how to inst all motherboard compo- nents, including CPUs, CPU heat sinks, memory modules, and PCI cards. There ar e also instructions in this section for installing SA T A/SAS hard drives. T ake note of the precautions mentioned in this section when instal[...]

  • Page 28

    20 Chap ter 2: Setting Up 2.1.3 Precautions Component s and electronic circuit boards can be damaged by discharges of st atic electricity . W orking on a system that is connected to a power su pply can be extremely danger ous. Follow the guidelines below to a void damage to the T ransport FT48-B498 5 or inju ry t o yourself. • Ground y ourself pr[...]

  • Page 29

    Chapter 2: S e tt ing Up 21 2.2 Installing Moth erboard Components This section describes how to install components on to the motherboard, including CPUs, memory modules and exp an- sion card s. 2.2.1 Removing the Chassis Co ver Follow these instructions to remove th e Transpo rt FT48- B4985 chassis cover . This step is req uired before any other p[...]

  • Page 30

    22 Chap ter 2: Setting Up 2.2.2 Installing the CPUs and Heatsinks Follow these instruction to inst all the CPU and CPU heat sink. NOTE : The system support s up to four CPUs. CPU0 must be installed first followed by CPU1, CPU2, and CPU3. 1. Remove the two screws securing the pre- installed air duct. 2. Remov e the air duct and lo cate the four CPU [...]

  • Page 31

    Chapter 2: S e tt ing Up 23 4. Lift up the CPU lever to unlock the socket. 5. Open the socket in the direction as illustrated. 6. Place the CPU in the socket as shown, making sure that pin 1 is located correct ly . NOTE : The CPU will only fit in the socket one way . No force should be require d to insert the CPU.[...]

  • Page 32

    24 Chap ter 2: Setting Up 7. Close the socket cover to lock the CPU in place, and press the CPU lever down in the direction shown to secure the CPU. 8. Remove all packagi ng from the ne w heat sink while b eing careful of the pre-applied therm al grease. 9. Place the fan and heatsink on top of the CPU and att ach with two screws as show n. 10. Repe[...]

  • Page 33

    Chapter 2: S e tt ing Up 25 2.2.3 Installing the Memory Follow the instructions in this section to install memory mod- ules in your FT48-B4985 system. 1. Remove the two screws securing the pre- installed air duct. 2. Remove the air duct and locate the memory slot s on the mother board. 3. Press the memory slot locking levers in the direction of the[...]

  • Page 34

    26 Chap ter 2: Setting Up 4. Align the memory module with the slot. The mo dule has indentat ions that align with notches in the slots. 5. Insert the memory module into the slot as shown. When inserted p roperly , the memory slot locking levers lock automatically onto the inde nt atio ns a t the ends o f the module. NOTE : Each bank me mory of sock[...]

  • Page 35

    Chapter 2: S e tt ing Up 27 Attentio n Wh en In st alling the Memory! Refer to the following t able for supported DDR2 populations. Single (CPU0 only) Dual (CPU 0 and CPU1) Four (CPU0, CPU1, CPU2, and CPU3) CPU0DIMM0 XX X CPU0DIMM1 XX X CPU0DIMM2 XXXXX X CPU0DIMM3 XXXXX X CPU1DIMM0 XX CPU1DIMM1 XX CPU1DIMM2 XXX X CPU1DIMM3 XXX X CPU2DIMM0 X CPU2DIM[...]

  • Page 36

    28 Chap ter 2: Setting Up 2.2.4 Installing the PCI-E/PCI Cards The FT48-B4985 has seven PCI card slot s: 2 x PCI-E x16 slots 2 x PCI-E x4 slots 1 x PCI slot Follow the instructions in this sect ion to inst all to install any of the above kin ds of PCI cards in your FT48-B49 85 system. 1. Locate the PCI-E/PCI card slots on the mo therboard. See “S[...]

  • Page 37

    Chapter 2: S e tt ing Up 29 3. Lift up the blanking plate. 4. Insert a PCI-E/PCI card into an appropriate slot, makin g sure it is firmly seated. Secure it wit h the screw removed in step 2.[...]

  • Page 38

    30 Chap ter 2: Setting Up 2.3 Installing Hard Drives The FT48-B4985 supports ei ght, hot-swapp a ble SAS or SA T A hard d rives. The unit is shipped with eight hot-swap bays and two SA T A backplanes. Follow these instructions to install a hard drive. 1. Pres s the release clip ( A ) an d pull the release lever up to unlock the drive tray from the [...]

  • Page 39

    Chapter 2: S e tt ing Up 31 3. Place a SAS or SA T A hard drive in the drive tray . 4. Secure the hard drive in place using four HDD screws. 5. Insert the drive tray back into the chassis and push the locking lever into place to secure it.[...]

  • Page 40

    32 Chap ter 2: Setting Up 2.4 Installing the Expansion DVD-ROM (Option) T o inst all the expansion DVD-ROMs, you need to remove the following four fans first. Follow the steps as instructed below . 1. Remove the F AN1, F AN2, F AN3, and F AN4 in the direction of the arrow from the chassis. 2. Unfast en an empty drive br acket from the chas sis in t[...]

  • Page 41

    Chapter 2: S e tt ing Up 33 4. Attach the tw o rails removed from the driv e bracket to the DVD-ROM with eight screws. 5. Slide th e second DVD-ROM into the chassis. 6. Connect the power and DVD-RO M cables reserved in the system to the rear of the second DVD-ROM dr ive. 7. T o inst all the third DVD-ROM, repeat the steps 2 to 4.[...]

  • Page 42

    34 Chap ter 2: Setting Up 8. Slide the third DVD- ROM into the chassis. 9. Connect the power and DVD-RO M cables reserved in the system to the rear of the third DVD-ROM dr ive.[...]

  • Page 43

    Chapter 2: S e tt ing Up 35 2.5 Installing the Floppy Disk Drive (Option) T o inst all a floppy disk drive, you need to remove the follow- ing four fans first. Follow the step s as instructed below . 1. Remove all the fans in the direction of the arr ow from the chassis. 2. Remove the two screws se curing the fan cradle to th e chassis. 3. Remove t[...]

  • Page 44

    36 Chap ter 2: Setting Up 4. Unfast en an empty drive br acket from the chas sis in the direction of the arrow shown. 5. Use a thin tool such as a flat screwdriver to pry open the front panel of the drive bracket as indicated. 6. Rem ov e th e fro nt panel and the inn er piec e as shown.[...]

  • Page 45

    Chapter 2: S e tt ing Up 37 7. Install the FDD front pane l to the front of the bracket. 8. Place a FDD in the drive bracket. 9. Secure the FDD in place using four screws.[...]

  • Page 46

    38 Chap ter 2: Setting Up 10. S lid e th e FD D with th e dr ive bra cke t back into the chassis. 1 1. Connect one end of the supplied FDD cable an d the power cable to the rear of th e FDD (A). Pass the other end through th e sp ace behind the met al plate as shown below (B). 12. Connect the other end of the FDD ca ble to the conne ctor on the mot[...]

  • Page 47

    Chapter 2: S e tt ing Up 39 2.6 Installing the LCM Kit (Option) T o inst all a LCM kit, you need to remove all the fans, fan cra- dle, and unfasten an empty drive bracket from the chassis first. Refer to the first four st eps given in “2.5 Installing the Floppy Disk Drive (Option) ”. Then, do th e following: 1. Install the LCD module as shown. [...]

  • Page 48

    40 Chap ter 2: Setting Up 3. Slide the LCM kit into the cha ssis . 4. Con ne ct th e ot he r en d of the LCD c ab le to the COM2 header (J101) on the motherboard.[...]

  • Page 49

    Chapter 2: S e tt ing Up 41 2.7 Installing the Long Cards Follow these instructions to inst all the long card holders and long cards in your FT48-B4985. 1. Locate the holes to secure the long ca rd holders on the fan cradle. 2. Secure the supplied long card holder to the fa n cradle with one screw . 3. Insert a long card into the holder as shown.[...]

  • Page 50

    42 Chap ter 2: Setting Up 2.8 T ower The FT48-B4985 can be used as a st andalone device when fitted with the supplied plastic fe et. When used as a standal- one device, the feet must be fitted to prevent the unit fro m falling over . Follow the steps below to rot a te all the drives to the tower po sition first. 2.8.1 Inst alling the 5.25” Device[...]

  • Page 51

    Chapter 2: S e tt ing Up 43 3. Unfasten the installed drives or the empty drive bracket s from the chassis in the direction of the arrow shown. 4. Slide all the drives or the b rackets out of the chas sis. 5. Slide all the drives or the bra ckets back into the chass is vertically .[...]

  • Page 52

    44 Chap ter 2: Setting Up 6. Replace all the cables to the devices as shown. 7. Remove the front beze l from the door assembly and rotate it 90 degrees clockwise as shown. 8. Fit the front bezel back into position.[...]

  • Page 53

    Chapter 2: S e tt ing Up 45 2.8.2 Inst alling Chassis Foot St ands The four feet should be atta ched as follows: 1. Each foot consists of two pieces. In sert the round pie ce of the foot into the larger foot section. The small plastic tab on the round pie ce sho uld fit into the curved slot on the other piece. 2. Use a sing le scre w through the ce[...]

  • Page 54

    46 Chap ter 2: Setting Up 2.9 Rack Mounting After installing the necessar y component s, the Transp ort FT48-B4985 can be mounted i n a st andard rack using the sliding rail kit. Sliding rail kit Rail assembly x 2 Mounting ears x 2 Screws kit x 3 2.9.1 Installing the Serv er in a Rack Follow these instructions to mount the FT48- B4985 into an indus[...]

  • Page 55

    Chapter 2: S e tt ing Up 47 Installing the Inne r Rails to the Unit 1. Remove the black p anels from the lef t side of server to reveal the rail mounting screwholes benea th. 2. Screw the mounting ears to each side of the FT48-B4 985 as shown using three M4-L5 screws (C) from the supplied screws kit. 3. Draw out the inner rails fr om each rail asse[...]

  • Page 56

    48 Chap ter 2: Setting Up Installing the Oute r Rails to the Rack 4. Measure the dist ance between inne r side of the front and rear mounting bracket s in the rack. 5. Adjust the outer rails to fit the length of the rack ( the distance mea sured in step 4). The sliding brackets have long slits to allow t hem to be fixed t o the other part of th e r[...]

  • Page 57

    Chapter 2: S e tt ing Up 49 7. Secure the outer rails to the rack using four M6 screws (B) for each side. Secure the mountin g brackets from outside, not inside , of the rack.[...]

  • Page 58

    50 Chap ter 2: Setting Up Rackmounting the Server 8. Draw out the middle rail to the latch position. 9. Lift the unit an d then insert the inner slide rails into the middle rails. 10. Push the unit in and press the latch key .[...]

  • Page 59

    Chapter 2: S e tt ing Up 51 1 1. Push the whole system into the rack. 12. Secure the mounting ears of the unit to the rack using two small br ackets (A) and M6 scre ws (B). Notes : • When the rails are extended, they will lock. T o shorten the rails again, you will ne ed to operate the release mechanism in each rail. • T o avoid injury , it is [...]

  • Page 60

    52 Chap ter 2: Setting Up 2.10 Opening the Chassis Front Bezel 1. Insert the front bezel key (packed in a bag in the accessory box ) an d ro tate the key 90 de gr ee s counterclockwise to unlock the front bezel. 2. Pull the front bezel in the dir ection of the arrow to open.[...]

  • Page 61

    Chapter 2: S e tt ing Up 53 2.1 1 Installing the Security T ab 1. Insert the supplied secur ity ta b into the secur ity slot from the rear of the FT48-B4985 as shown below . 2. Secure the security tab with two screw s. 3. Now you can lock the FT48 -B4985 chassis with a padlock using the opening from the security tab.[...]

  • Page 62

    54 Chap ter 2: Setting Up[...]

  • Page 63

    Chapter 3: Repl acing Pre-install ed Co mponents 55 Chapter 3: Replacin g Pre-inst alled Component s 3.1 Introduction This chapter describes how to replace all the pre-installed component s of your FT48-B49 85, includ ing the motherboard, SAS/SA T A backplane, LED control board, DVD- ROM, power supply , cooling fans, and fan control board. T ake no[...]

  • Page 64

    56 Chapter 3: Replacing Pre-instal led Components 3.1.3 Precautions Component s and electronic circuit boards can be damaged by static electricity . Working on a system that is connected to a power supply can be extrem ely dangerous. Follow the guidelines below to avoid damage to the FT4 8-B4985 or injury to yourself. • Ground y ourself properly [...]

  • Page 65

    Chapter 3: Repl acing Pre-install ed Co mponents 57 3.2 Disassembly Flowchart The following flowchart outli nes th e disassembly procedure. Note: The T ransport FT48-B4985 should be always powered of f before disa ssembly . Rear Components Chassis top cover Mainboard DIMMs Heatsink /CPU assembly PCI card Mainboard Front Components FA N PCBs DVD-ROM[...]

  • Page 66

    58 Chapter 3: Replacing Pre-instal led Components 3.3 Removing the Chassis Cover Follow these instructions to remove th e Transpo rt FT48- B4985 chassis cover . This step is req uired before any other procedures in this chapter can be undertake n. 1. If the chassis lid is secured with two screws fr om the rear of the unit, remove them first. See ?[...]

  • Page 67

    Chapter 3: Repl acing Pre-install ed Co mponents 59 3.4 Removing the Front Door Assembly A door is supplied with the FT48- B498 5 that can be used when the unit is rack mounte d or standalone. Follow th ese instructions to remove the door . 1. Pull out the four fixing bars locking the door assembly onto the se rver . 2. Remove the door assembly fro[...]

  • Page 68

    60 Chapter 3: Replacing Pre-instal led Components 3.5 Replacing Motherboard Components Follow these instructio ns to remove motherboard component s and replace the motherboard. 3.5.1 Disconnecting All M otherboard Cables Before rep lacing the motherboard or certain compo nents, remove cables connected to the motherboa rd. Follow these instructions [...]

  • Page 69

    Chapter 3: Repl acing Pre-install ed Co mponents 61 3.5.2 Replacing the Motherboa rd After removing all of those cables, follow these instructions to replace the mother board in your FT48-B4985. 1. Remove the heatsinks an d processors if installed. 2. Remove the nine screws securing the mothe rboard to the chassis. 3. Carefully lift the motherboard[...]

  • Page 70

    62 Chapter 3: Replacing Pre-instal led Components 3.6 Replacing the Cooling Fans The FT48-B4 985 requires six chas sis cooling fans. Follow these instr uctions to replace a cooling fan. 1. Rem ove the fan in the direction of the arrow from the fan cradle. 2. Repl ace a new fan into the fan cradle following the above steps in reverse.[...]

  • Page 71

    Chapter 3: Repl acing Pre-install ed Co mponents 63 3.7 Replacing the Fan Control Board T o re place a cooling fan , you need to remove all the fans an d the fan cradle first. Refer to th e first three steps given in “2.5 Installing the Floppy Disk Drive (Option)”. Then , do the follow- ing: 1. Disco nnect the two powe r connectors and one fan [...]

  • Page 72

    64 Chapter 3: Replacing Pre-instal led Components 3. Rem ove the two fixing b rackets as instructed for replacement of the fan con trol board. 4. Remov e the ten screws se cu ring the fan board to the chassis. 5. After replacemen t, install the fixing brackets and se cure the fan cradle in place following the above step s in reverse.[...]

  • Page 73

    Chapter 3: Repl acing Pre-install ed Co mponents 65 3.7.1 Fan Board Features FAN1 Connector J3 PWM Header FAN3 Connector FAN5 Connector FAN2 Connector J2 Big 4P Power Connector J1 Big 4P Power Connector FAN4 Connector FAN6 Connector[...]

  • Page 74

    66 Chapter 3: Replacing Pre-instal led Components 3.7.2 Fan Board Con nector Pin Definition J3 and PWM Pin Header F AN1~F AN6 Fan Connector Pin Out J1, J2 Big 4-pin Power Connector Pin Out 1 F AN1 PWM 2 GND 3 F AN2 PWM 4 GND 5 F AN3 PWM 6 GND 7 F AN4 PWM 8 GND 9 F AN5 PWM 10 GND 1 1 F AN6 PWM 12 GND 13 F AN PWM INPUT 14 KEY PIN 15 MUTE+ 16 GND 1G N[...]

  • Page 75

    Chapter 3: Repl acing Pre-install ed Co mponents 67 3.8 Replacing the SAS/SA T A Backplane T o replace the SAS/SA T A backpla ne, you need to remove all the fans and the fan cradle first. Refer to the first three step s given in “2.5 Installing the Flop py Disk Drive (Option)”. Then, do the following: 1. Remove the SA T A h ot-swap HDD trays co[...]

  • Page 76

    68 Chapter 3: Replacing Pre-instal led Components 4. Lift the backpla ne from the chassis. 5. Place a new backplane in position and secure in place with one screw . 6. Recon ne ct th e po we r an d da ta cables.[...]

  • Page 77

    Chapter 3: Repl acing Pre-install ed Co mponents 69 3.8.1 M121 1-P SAS/SA T A Backplane Features Front View Rear V iew (Top to bottom) J1/J2/J3/J4 29 pin SAS/SATA connectors J13/J14 Big 4P Power Connector (Top to botto m) J5/J6/J7/J8 (Default) Primary 7 pin connectors JP3 2x4 pin header for SAS Hard Disk Failure LED (Top to bottom) J9/J10/J11/J12 ([...]

  • Page 78

    70 Chapter 3: Replacing Pre-instal led Components 3.8.2 M121 1-P SAS/SA T A Backplane Connector Pin Definition JP3 SAS Hard Disk Failure LED Input (Reserved for SAS add-on card) J13 and J14 Big 4-pi n Power Connector Pin Out 1 HDD AF+ 2 HDD AF- 3 HDD BF+ 4 HDD BF- 5 HDD CF+ 6 HDD CF- 7 HDD DF+ 8 HDD DF- 1 V DD +12V 2G N D 3G N D 4 V CC +5V[...]

  • Page 79

    Chapter 3: Repl acing Pre-install ed Co mponents 71 3.9 Replacing the LED Control Board Follow these instructions to replace the LED co ntrol board. 1. Remove the F AN2 in the dir ection of th e arrow from the chassis. 2. Remove all the cables from the LED control boar d. 3. Unfasten the LED module and slide it out as shown to lift it free of the c[...]

  • Page 80

    72 Chapter 3: Replacing Pre-instal led Components 4. Remove the three screws securing the LED cont rol board to the bracket. 5. Slide the LED control board from the bracke t as shown. 6. After replacemen t, insert and secure the unit to the chassis following the above steps in reverse.[...]

  • Page 81

    Chapter 3: Repl acing Pre-install ed Co mponents 73 3.9.1 M1007 LED Control Boar d Features USB2 USB1 ID Switch Power LED Warning LED HDD Access LED LAN1 LED LAN2 LED ID LED Reserved Functio n Reset Switch Power Switch J1 USB 2x5 pin Header J2 2x14 pin Header[...]

  • Page 82

    74 Chapter 3: Replacing Pre-instal led Components 3.9.2 M1007 LED Control Boar d Connector Pin Definition J1 2 x 5 Pin USB Header J2 2 x 14 Pin Connector 1 VCC +5V 2 VCC +5V 3 USB1- 4 USB0- 5 USB1+ 6 USB0+ 7 GND 8 GND 9 KEY PIN 10 GND 1 HD _LED+ 2 HD_LED- 3 RESET+ 4 RESET - 5 PW_LED+ 6 PW_LED- 7 WLED+ 8 WLED - 9 ICH_SMBDA T 10 ICH_SMBCLK 1 1 EXT_IN[...]

  • Page 83

    Chapter 3: Repl acing Pre-install ed Co mponents 75 3.10 Replacing the DVD-ROM T o repl ace the DVD-ROM, you need to remove the following four fans first. Follow the step s as instructed below . 1. Remove the F AN1, F AN2, F AN3, and F AN4 in the direc- tion of the arrow from the chassis. 2. Remove the power and DVD-ROM cables from the rear of the [...]

  • Page 84

    76 Chapter 3: Replacing Pre-instal led Components 4. Remove the eight sc rews securing the two DVD-ROM rails to the drive. 5. After replacem ent, insert the unit to the chassis following the above steps in reverse .[...]

  • Page 85

    Chapter 3: Repl acing Pre-install ed Co mponents 77 3.1 1 Replacing the Redundant Power Supply If the 2+1 redundant power su pply is fitted, any of the thre e units can be hot swapped. Follow these instructions to replace a redundant powe r supply unit. 1. Release the redundant power supply by turning the thumb screw clockwise. 2. Press the latch a[...]

  • Page 86

    78 Appendix I: BI OS Differences The BIOS of B4985 is similar to the BIOS of S4985. There is only one menu dif ferent. Y ou may refer to the att ached motherboard manual for the comple te BIOS informatio n. The differe nces between B4985 and S4985 is on the “Advanced/Hardware Health Information” menu. See the following for the differences. B498[...]

  • Page 87

    79 S4985 Advanced /Hardware Monitor Information Table of Differe n ces PhoenixBIOS Setup Utility Advanced Hardware Monitor Item S p ecific Help CPU0 T emperature xxx ºC CPU1 T emperature xxx ºC CPU2 T emperature xxx ºC CPU3 T emperature xxx ºC Sys1 T emperature xxx ºC Sys2 T emperature xxx ºC Sys3 T emperature xxx ºC Sys4 T emperature xxx º[...]

  • Page 88

    80 Appendix II: Cable Connection T ables SAS/SA T A Cables F AN Cables Power Supply Cab les T able 1: FT48-B4985 M odel M121 1-P SAS/SA T A Backplane 1 Connects to Motherboard J8 (HDD1) Æ J98 J7 (HDD2) Æ J99 J6 (HDD3) Æ J18 J5 (HDD4) Æ J19 M121 1-P SAS/SA T A Backplane 2 Connects to Motherboard J8 (HDD5) Æ J1 13 J7 (HDD6) Æ J1 14 J6 (HDD7) Æ[...]

  • Page 89

    81 T able 4: Power Supply to Backplane Power Supply Connects to M121 1-P SAS/SA T A Backplane 1 PE 4-pin power cable Æ J13 PF 4-pin power cable Æ J14 Power Supply Connects to M121 1-P SAS/SA T A Backplane 2 PG 4-pin power cable Æ J13 PH 4-pin power cable Æ J14 T able 5: Power Supply to F AN Board Power Supply Connects to M1014 F AN Board PI 4-p[...]

  • Page 90

    82 Other Cables T able 9: LED Control Board to Motherboard M1007 LED Control Board Connects to Motherboard J1 (USB) Æ J30 J2 28-pin (TYFP1) Æ J1 15 J2 28-pin (TYFP2) Æ J122 T able 10: DVD-ROM Ca ble to Motherboard DVD-ROM Connects to Motherb oard DVD-ROM 1 Æ IDE 1 DVD-ROM 2 (option) Æ IDE 1 DVD-ROM 3 (option) Æ IDE 2 T able 1 1: LCD Module to[...]

  • Page 91

    83 Appendix III: Installing the SMDC Card (Option) The following provides you with the information on inst alling M3291 SMDC card into any PCI slot in your FT48-B4985 system. 1. Secure M3291 on a PCI b racket as shown. 2. Connect the following cables to M3 291 as shown. a. 2x25 p in SMDC cable to M3 291 J1 connector . b. 2x5 pin serial cable to M32[...]

  • Page 92

    84 4. Connect the other end of SMDC cable and serial cable to the SMDC connector and COM2 header (J101) on the mother board. 5. Place the SMDC card in the PCI slot as shown. 6. Secure the PCI bracket with the screw you removed from the blanking plate.[...]

  • Page 93

    85 Cable Connection T able SMDC Card (M3291) Connects to Motherboard J1 connector Æ SMDC connector J2 COM port Æ J101 COM2 header[...]

  • Page 94

    86 Appendix IV : Installing Exp ansion Hard Drives The FT48-B4985 allows you to add up to four exp ansion hot swap drives. Use the supplied 3-to-4 conversion HDD cage (optional accessory) to inst all the expansion hard drives in either a horizonta l or vertical position. Before the inst allation, you need to remove all the fans and the fan cradle f[...]

  • Page 95

    87 3. Slide all the drives or the b rackets out of the chas sis. Rackmount inst allation (step 4 to 9): 4. Install the 3-to-4 co nversion HDD cage into the front of the FT48-B4985 as shown. 5. Install the SAS or SA T A hard drives in the drive trays as instructed in the previous section. 6. Insert the drive trays into the chassis and push the locki[...]

  • Page 96

    88 7. The e xpansion HDD numbering is indicated as below . T op to bottom: HD D9, HDD10, HDD1 1, HDD12 8. Conne ct th e po we r an d da ta cables to the SA T A/SAS backplane. SA T A/SAS connectors on the M1216-P backplane ar e ind i cate d as below . T op to bot tom: J1, J3, J5, J7 9. Connect the other end of the SA T A/SAS cables to the connectors[...]

  • Page 97

    89 T ower installation (s tep 10 to 15): 10. Install the 3-to-4 co nversion HDD cage into the front of the FT48-B4985 as shown. 1 1. Install the SAS or SA T A hard drives in the drive trays as instructed in the previous section. 12. Insert the drive trays into the chassis and push the locking lever into place to secure it. 13. The expansion HDD num[...]

  • Page 98

    90 14. Co n ne ct th e po we r an d da ta cables to the SA T A/SAS backplane. SA T A/SAS connectors on the M1216-P backplane ar e ind i cate d as below . Left to right: J1, J3, J5, J7 15. Connect the other end of the SA T A/SAS cables to the connectors on the PCI-E RAID card.[...]

  • Page 99

    91 T echnical Support If a problem arises with your system, you should first turn to your dealer for direct su pp ort. Y our system has most likely been configured or design ed by th em and they should have the best idea of what hardware and sof tware your syst em contain s . Hence, they should be of the most assistance for you. Furthermor e, if yo[...]

  • Page 100

    92 2. See the TY AN website for F A Q’s, bulletins, driver upd ates, and other info r ma tio n: http://www .tyan.com 3. Contact your dealer for he lp BEFORE calling TY AN. 4. Check the TY AN user gro up: alt.comp.periphs.main- board.TY AN Returning Merchandise for Service During the warranty p eriod, contact your distributor or system vendor FIRS[...]