Uniden 9035+1 manuel d'utilisation

DECT Elite 9035 DECT Elite 9035+1 DECT Elite 9035+2 DECT ELITE OM.indb 1 13/3/08 3:16:43 PM[...]

1 T able of Contents Welcome ....................................................................... 4 Installing the Phone .................................................... 5 Choosing the Best Location ...................................... 5 Installing the Battery ................................................. 6 Connecting the AC adapter ..[...]

2 Customizing Y our Handsets ..................................... 28 Changing the Handset Banner ................................ 28 Selecting a Ringer T one .......................................... 28 Activating AutoT alk .................................................. 29 Activating Any Key Answer ..................................... 29 Col[...]

3 T raveling Out of Range ........................................... 57 Liquid Damage ........................................................ 58 Precautions! .............................................................. 59 Rechargeable Nickel-Metal-Hydride Battery W arning ..................................................... 59 Important Safety[...]

4 Welcome W elcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. DECT ELITE OM.indb 4 13/3/08 3:16:46 PM[...]

5 Installing the Phone 6 Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: Notes: For maximum range: Keep both the base and handset antennas free of obstruction. When the handset is not in use, place the handset in an upright position. Metal and reinf[...]

5 6 Installing the Phone Installing the Battery Use only the Uniden BT -694 rechargeable battery pack supplied with your cordless telephone. Locate the battery pack, battery cover and the handset. Pu sh t he b at te ry p ac k co nn ec to r in f ir ml y . ( Y o u should hear it click into pl ac e. ) Ge nt ly t ug o n th e battery wires to make sure [...]

7 Installing the Phone 8 Connecting the AC adapter T o the base T o avoid risk of re and shock, only use the Uniden AAD-041S AC adapter with the base. Connect the AC adapter to the DC IN 9V jack on the bottom of the base. Connect the AC adapter to a standard 240V AC wall outlet. Don’t put any power cord where it people might trip over it or st[...]

7 8 Installing the Phone Charging the Handset Place the handset in the base cradle with the display facing forward. If you have an accessory handset, place it in the charging cradle with the display facing forward. Charge your handset at least 15 to 20 hours before plugging into the phone line. Make sure that the charge LED illuminates when the han[...]

9 Installing the Phone 10 Connecting to the Phone Line Make sure that the battery pack is fully charged. (Supplied) Connect the telephone cord to the TEL LINE jack on the bottom of the base. Route the cord through the molded wiring channel. Connect the telephone cord to a telephone wall jack. What if CHECK TEL LINE appears on the handset display? T[...]

9 10 Installing the Phone T esting the Connection Pick up the handset from the cradle and press [ /ash] . Y ou should hear a dial tone, and the display should show T ALK. What if I can’t hear a dial tone? Check the telephone cord connection on the base. What if the display doesn’t show T ALK? Check the battery pack connection in the handset.[...]

1 1 Installing the Phone 12 NOW YOU ARE READY T O USE YOUR PHONE! Installing the Belt Clip Insert the tabs on the sides of the belt clip into the holes on either side of the handset. Press the belt clip down until it clicks into place. (Tug on the clip to make sure it’s secure.) To remove the belt clip, gently pull the tabs out of the holes, then[...]

1 1 12 Installing the Phone Expanding Y our Phone Adding accessory handsets Y our phone supports a total of six cordless handsets, including any that were supplied with your phone. Y ou can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle. Y our phone is compatible with the following Uniden D[...]

13 Installing the Phone 14 When the handset has registered to the base, the LCD will display REGISTRA TION COMPLETE then show the handset ID number . If the display shows REGISTRA TION F AILED, repeat the process again. Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see Resetting the H[...]

13 14 Installing the Phone Selecting the base When your handset is registered to another base, it will automatically connect to the base. A base ID (that is for the handset only) will be assigned in the order of registration. Y ou can either select a base you want to use manually , or set to AUTO. If you set to AUTO, when the handset comes out of r[...]

15 Getting to Know Y our New Phone 16 Getting to Know Y our New Phone Features 1.8GHz DECT Elite expandable system Expands up to 6 handsets Integrated digital answering system Advanced phonebook features on each handset: Store 70 phonebook entries Alphabetical search Personalized ring by party Personalized LCD color scheme by party . T ransfer sing[...]

15 16 Getting to Know Y our New Phone T erminology Used in this Manual Accessory Handsets Additional handsets that can register to the base, allowing you to add handsets without connecting another phone line. This base supports a total of six cordless handsets; see page 12 for compatible handsets. Base The main part of the phone that connects to yo[...]

17 Getting to Know Y our New Phone 18 Parts of the Handset new message LED Earpiece Display (LCD) [Int’com/clear] key (intercom/clear) [ ] key (phonebook/left) [ /ash] key (talk/ash) [ / ] key [ Redial/pause] key (redial/pause) Headset jack cover Belt clip hole Speakerphone speaker and ringer Battery compartment [ ] key (up) [Select/menu] k[...]

17 18 Getting to Know Y our New Phone Parts of the Base [nd] key (nd handset) Charging contacts charge LED [ ] key (delete) [on/off] key (answering system on/off) message counter LED [ ] key (play/stop) [ ] key (skip) [ ] key (repeat) Speaker [+] key (volume up) [-] key (volume down) DECT ELITE OM.indb 18 13/3/08 3:17:57 PM[...]

19 Using the Interface 20 Using the Interface Reading the Handset Display Day of the week and time Handset ID and banner Call duration In standby During a call SUN AM Handset #1 The ringer off icon indicates that the ringer is turned off. The speaker icon appears when the speaker phone is in use. The CID icon appears when you have new Caller ID rec[...]

19 20 Using the Interface Using the Four-way Function Key Y our handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook. Move the key to the right to access Caller ID information. T o u[...]

21 Using the Interface Entering T ext from Y our Handset Y ou can use the number keypad on your handset to enter text by referring to the letters printed on each number key . When you press the number key in a text entry eld, the phone displays the rst letter printed on the number key . Press the number key twice to display the second letter [...]

22 Basic Setup Basic Setup Setting the Day & Time If you do not set the clock on your answering system, your messages may not have the correct time and day stamp. Press [Select/menu] . Move the cursor to DA Y & TIME and press [Select/menu] . Use [ ] and [ ] to select the day of the week, and press [Select/menu] . Use the number keypad ( [0][...]

23 Basic Setup Activating the Key T ouch T one Key T ouch T one is the tone your keypad makes when keys are pressed. Y ou can turn this tone on or off. Press [Select/menu ]. Select the HANDSET SETUP menu, and then the KEY TOUCH TONE submenu. Move the cursor to select ON or OFF . Press [Select/menu] . Y ou will hear a conrmation tone. Name T ag N[...]

24 Setting Up the Phonebook Each handset has its own separate phonebook that holds up to seventy names and numbers. When a handset’s phonebook is full, the handset beeps and shows MEMORY FULL on the display . Y ou cannot add any names and numbers in that handset’s phonebook until you delete some of the existing ones. Y ou can also use the phone[...]

25 26 Assign a personal ring tone for this entry (PERSONAL RING). Y ou can attach a special ring tone to each phonebook entry; the phone will use this ring tone when this person calls. Use [ ] and [ ] to select one of the ten different ring tone options (see Selecting a Ringer T one on page 28 for a complete list of ring tones). As you scroll throu[...]

25 26 Editing an Existing Phonebook Entry With the phone in standby , press [ ] to open the phonebook. Find the entry you want to edit and press [Select/menu] . Select EDIT . Follow the steps for Creating Phonebook Entries on page 24. If you do not wish to change the information at any step, simply press [Select/menu] to go to the next step. Storin[...]

27 Deleting all Phonebook Entries With the phone in standby , press [ ]. Press [Select/menu] , and then select DELETE ALL. DELETE ALL? appears in the display . Move the cursor to select YES. Press [Select/menu] . Y ou will hear a conrmation tone, and DELETED! appears in the display . Copying Phonebook Entries to Another Handset If you have more [...]

28 28 Customizing Y our Handsets All of the following options are set separately for each handset, so you can customize a handset for each room in your house. Changing the Handset Banner Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. Y ou can change the name your phone d[...]

29 29 30 30 Activating AutoT alk AutoT alk allows you to answer the phone simply by picking up the handset from the cradle. Y ou do not have to press a button to answer the call. Press [Select/menu] . Select the HANDSET SETUP menu, and then the AUTOT ALK submenu. Move the cursor to select ON or OFF . Press [Select/menu] . Y ou will hear a conrma[...]

29 29 30 30 W allpaper Y our phone has four wallpapers to choose from. Press [Select/menu] . Select the HANDSET SETUP menu, and then the W ALLP APER submenu. Move the cursor to select a wall paper . As you scroll through the options, you will see each wallpaper on the display . If you do not want to use a wallpaper , choose NO SELECTION. Press [Sel[...]

31 Using Y our Phone 32 Using Y our Phone From a cordless handset From a handset speakerphone Making a call Pick up the handset from the cradle. Press [ /ash]. Listen for the dial tone. Dial the number . OR Pick up the handset from the cradle. Dial the number . Press [ /ash] . 1. 2. 3. 4. 1. 2. 3. Pick up the handset from the cradle. Press [ [...]

31 32 Using Y our Phone Making a Call from the Phonebook With the phone in standby , press [ ] to open the phonebook. Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 25). Press [ /ash] or [ ] to dial the number . Note: Y ou can also press [ /ash] or [ ] before you open the phonebook. Find the phone number you [...]

33 34 Using Caller ID, Call Waiting, and Redial Lists 34 Using Caller ID, Call W aiting, and Redial Lists If you subscribe to Caller ID service from your phone company , your phone will show you the caller ’s phone number and name (if available) whenever a call comes in. If you subscribe to Caller ID on Call W aiting, the phone will also show you[...]

33 34 34 Using Caller ID, Call Waiting, and Redial Lists Deleting Caller ID Numbers T o delete only one Caller ID number , press [ ] when the phone is in standby , and then nd the number you want to delete. Press [Select/menu] and select DELETE ENTRY . When the phone asks you to conrm, select YES. T o delete all the Caller ID numbers, press [[...]

35 PB Using Caller ID, Call Waiting, and Redial Lists Redialing a Number Y ou can quickly redial the last ve numbers dialed on each handset. With the phone in standby , press the [Redial/pause] to open the redial list. Use [ ] and [ ] or [Redial/pause] to scroll through the redial list. When you nd the number you want to dial, press [ /ash[...]

36 36 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Ringer V olume Y ou can choose from four ringer volume settings (off, low , medium, and high) separately on each handset or the base. With the phone in standby , press [ ] or [ ] on the handset or press [+] or [-] on the base.[...]

37 37 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Speaker V olume Handset Speaker: Y ou can choose from six volume levels for the handset speaker while on a speakerphone call or when the handset is accessing the answering system. T o adjust the handset speaker volume, press [ ] (to make it louder) or [ ] (to make it softer). T[...]

38 Finding a Lost Handset Using Hold, Conference and T ransfer Finding a Lost Handset T o locate a misplaced handset, press [nd] on the base when the phone is in standby . The handsets connected to the paging base will beep for one minute, and P AGING appears on the handset display . T o cancel paging, press [nd] again or any key on the found[...]

39 Using Hold, Conference and T ransfer T ransferring a Call Y ou can transfer a call from one handset to another . The handsets must be currently connected to the same base (see page 14). During a call, press [Int’com/clear] . Use [ ] or [ ] to select the handset you want to transfer the call to, and then press [Select/menu] . Select ALL to page[...]

40 Using Special Features Using Special Features Privacy Mode Privacy mode prevents other handsets from interrupting while you’re on a call. As long as your handset is in privacy mode, other handsets can’t join your call or make any calls of their own: their displays will show UNA V AILABLE. While on a call, press [Select/menu] . Select CALL PR[...]

41 Using Special Features 42 Answering an intercom page When the intercom page tone sounds, the display will show the ID of the handset that is paging. Press [ /ash] or [Int’com/clear] on the handset. Note: If AutoT alk is on, the handset will automatically answer the page when you pick up the handset from the cradle. If Any Key Answer is on, [...]

41 42 Using Special Features Installing the Optional Headset Y our phone may be used with an optional headset. T o use this feature, insert the headset plug into the headset jack. Y our phone is ready for hands-free conversations. (Headsets may be purchased by contacting Uniden. See warranty on inside back cover for contact information.) DECT ELITE[...]

43 43 Setting Up the Answering System 44 44 Setting Up the Answering System Y ou can set up your answering system’s features from the handset. Only one handset at a time can access the answering system menus. Note: If you have multiple bases, select the base with answering system you want to access (see page 14). Recording a Personal Greeting Y o[...]

43 43 44 44 Setting Up the Answering System Press [6] . The system plays the current greeting. T o keep this greeting: Do nothing. T o switch to the other greeting: Press [6] while the system is playing the current greeting. Each time you press [6] , the system switches between the pre-recorded and the personal greeting. The last greeting you hear [...]

45 45 Setting Up the Answering System 46 46 Setting the Number of Rings The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. Y ou can set the ring time to answer after six, nine, or twelve rings. If you enable the T oll Saver (TS) setting, the answering system picks up[...]

45 45 46 46 Setting Up the Answering System Activating the Message Alert The message alert feature sounds a short alert tone every fteen seconds whenever you have a new message. T o turn on the message alert: Press [Select/menu] . Select the ANSW . SETUP menu, and then the MESSAGE ALERT submenu. Move the cursor to select ON or OFF . Press [Selec[...]

47 Using the Answering System 48 Using the Answering System T urning Y our Answering System On and Off From the base From the handset T urning On With the phone in standby , press [on/off] . The system announces “Answering System is on” and plays the current greeting. The message counter LED displays the number of messages stored in memory . If[...]

47 48 Using the Answering System Reviewing Messages The message counter LED on the base displays the number of messages stored in memory . When you have new messages (that you have not listened to yet), the message counter LED on the base and the new message LED on the handset ash. The answering system plays your new messages rst. If you have[...]

49 Using the Answering System 50 Screening Calls From the base From the handset While the system is taking the message, simply listen to the caller over the base speaker . (Y ou need to activate the base call screen feature in advance. See page 46 .) T o mute the call screen and allow the caller to continue leaving the message, press [ ]. • • W[...]

49 50 Using the Answering System T o operate from a remote location, use any touch-tone telephone, and follow these steps: Call your telephone number and wait for the system to answer . If the answering system is off, it will answer after about fteen rings and sounds a series of beeps. During the greeting or the beeps (if answering system is off[...]

51 52 Maintenance 52 Maintenance Specications Operating temperature 32° F to 122° F (0° C to 50° C) AC adapter Base Charging cradle Part number AAD-041S AAD-600S Input voltage 240V AC, 50 Hz 240V AC, 50 Hz Output voltage 9V DC @ 350mA 9V DC @ 210mA Battery pack Part number BT -694 Notes: Use only the supplied AC adapters. Be sure to use the [...]

51 52 52 Maintenance Low battery alert When the battery pack is very low , the phone is programmed to eliminate functions in order to save power . When LOW BA TTERY - CHARGE HANDSET appears in the handset display and the phone is in standby , none of the keys will operate. If you are on a call, complete your conversation as quickly as possible, and[...]

53 T roubleshooting 54 T roubleshooting Common Issues If your phone is not performing to your expectations, please try these simple steps rst. If these steps do not solve your problem, please contact Uniden. See warranty on inside back cover for contact information. When you have this problem... T ry ... The charge LED won’t illuminate when th[...]

53 54 T roubleshooting When you have this problem... T ry ... Severe noise interference. Keeping all handsets away from microwave ovens, computers, wireless LAN station, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, uorescent lights, and electrical appliances (see page 5). Moving the base to another location[...]

55 T roubleshooting 56 When you have this problem... T ry ... The answering system doesn’t say what time messages were recorded. Checking to see if you have set the time (see page 22). • Messages are incomplete. The incoming messages may be too long. Ask callers to leave a brief message. The memory may be full. Delete some or all of the saved m[...]

55 56 T roubleshooting The phone will ask you to conrm the deregistration. Select YES. The selected handset will clear its registration information only from the base it is currently connected to, and then delete the link to the base from its own memory . When the base information is deleted, the handset displays HANDSET NOT REGISTERED-PLACE HAN[...]

57 T roubleshooting 58 Changing the Line Mode for Multiple Extensions Line mode refers to the method that telephones use to signal each other that an extension is in use. Customer service may recommend changing the line mode if you have any of the following problems: Y our phone keeps ringing after someone answers on an extension phone. Y our answe[...]

57 58 T roubleshooting Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe of f the liquid, and use as normal. If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has enter[...]

59 Precautions! Precautions! Before you read anything else, please observe the following: W arning! Uniden Australia Pty Ltd and Uniden NZ Ltd DO NOT represent this unit to be waterproof. T o reduce the risk of re, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Metal-Hydride Battery W ar[...]

60 Index 61 Index A Accessory handsets .................... 12 Answering calls............................ 31 Answering system Reviewing messages ............... 48 Setting up ................................. 43 T urning on/off ........................... 47 When away from home ............ 49 Any key answer ........................... 29 Audio to[...]

60 61 Index Liquid damage ............................. 58 Low battery alert .......................... 52 M Maintenance ................................ 51 Making calls ................................. 31 Using Caller ID ......................... 33 Using redial .............................. 35 Using the phonebook ............... 32 Message aler[...]

62 Remote Operation Card Remote access away from home T urn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press # and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts. 3. T o quit, hang up the phone. 1. Call your ph[...]

63 CUT T ask Key Repeat a Message Play Incoming Messages Skip a Message Delete a Message Stop Operation Answering System On Answering System Off Help CUT T ask Key Repeat a Message Play Incoming Messages Skip a Message Delete a Message Stop Operation Answering System On Answering System Off Help CUT T ask Key Repeat a Message Play Incoming Messages[...]

64 MEMO DECT ELITE OM.indb 64 13/3/08 3:21:47 PM[...]

65 MEMO DECT ELITE OM.indb 65 13/3/08 3:21:47 PM[...]

66 One Y ear Limited W arranty ONE YEAR LIMITED W ARRANTY UNIDEN DECT ELITE 9035, 9035+1 and 9035+2 CORDLESS PHONE IMPORT ANT : Ev id enc e o f o ri gin al pu r ch as e i s re qu ir e d f or wa rr a nt y s er v ic e. W ARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original countr[...]

© 2008 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UCZZ01541BZ(0) DECT ELITE OM.indb 67 13/3/08 3:21:48 PM[...]