Western Digital TS-1079 Pro manuel d'utilisation

201 4/0 6/20 QNAP Turbo NAS Hardware Use r Manual © 201 4 . QNAP S ystems , Inc. All Righ ts Reserve d.[...]

2 Thank you for choosing QNAP products ! This user manual provides descripti on of the hardware of the Turbo NAS and rel evant guideli ne of certain f unctions. Pl ease re ad carefully and strictly adhere to the instructions of the manual. This user manual is appli cable to t he following Turbo NAS models: HS - 210, HS - 251, TS - 112 P , TS - 120,[...]

3 DISCLAIMER In no event shall QNA P Systems, Inc . (QNAP) liability exceed the price paid for the produc t from d irect, indire ct, specia l, incid ental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. QNAP makes no warran ty or r epresentat ion, expres sed, impli ed, or statu tory,[...]

4 Regulator y Notic e FCC Notice QNAP NAS comply w ith diff erent FCC complianc e cla sses. Pleas e refer t he Appendix for deta ils. Once t he cl ass of the devi ce is determined, refer to the foll owing corres ponding statement. ======================================================= FCC Class A Not ice This device complies with Par t 15 of the F[...]

5 FCC Class B Not ice This device complies with Par t 15 of the FCC Rules. Operation i s subject to the foll ow ing two conditions: 1. This device may not cause har m ful inter ference. 2. This device must accept any interference received, includ ing in terferenc e that m ay cause undesired operation. Note: Th is equ ipment ha s been tested and f o[...]

6 Symbols in this document Warni ng This icon indicates the instructions must be strictly followed. Failure to do so could result i n injury to human body or death. Caution This icon indicates the action may lead to disk clearance or loss O R failure to follow the instruc tions co uld res ult in data dam age, dis k damage, or product damage.[...]

7 Table of Contents Table of Contents .............................................................................................. 7 " Safety Warni ngs ................................................................................................ 8 " Chapter 1. " CPU and Memory Specifi cations ....................................[...]

8 Safety Warnings 1. The NAS ca n oper ate nor mall y i n the tempe ratu re o f 0ºC –4 0ºC and relative humidity of 0% – 95%. Please make sure t he environment is well - ventilated. 2. The power cord and devices connected to the NAS must pr ovide correct supply voltage (100W, 90 – 264V). 3. Do not place the NAS in direct su nlight or near c[...]

9 Chapter 1. CPU and Memory Spec ifications Caution : Modify ing t he hardware, software , or fi rmware of the QNAP p roducts wil l void the warr anty. QNAP is not res ponsibl e for any form of damage or loss of dat a caused by modding the QNAP products. Users should bear their own risks of all sorts of possible data loss or system instabi lities d[...]

10 System TS -1 20 TS -2 20 TS -4 20 CPU Marvell 1.6 GHz Marvell 1.6 GHz Marvell 1.6 GHz Memory 5 12MB DDR3 512MB DDR3 512MB DDR3 Flash 16MB 16MB 16MB CPU replaceable No No No Memory r eplacea ble No No No Number of SODI MM slots 0 0 0 Number of ha rd drive slots 1 2 4 System TS -1 21 TS -2 21 TS -4 21 CPU Marvell 2.0 GHz Marvell 2.0 GHz Marvell 2.[...]

11 System HS- 21 0 CPU Marvell 1.6 GHz Memory 512MB DDR3 F lash 16MB CPU replaceable No Memory r eplacea ble No Number of SODI MM slots 0 Number of ha rd drive slots 2 System TS - 420U TS - 421U CPU Marvell 1.6 GHz Marvell 2.0 GHz Memory 1GB DDR3 1GB DDR3 Flash 16MB 16MB CPU replaceable No No Memory r eplacea ble No No Number of SODI MM slots 0 0 N[...]

12 System TS - 470 TS - 670 TS - 870 CPU Dual -c ore Intel ® 2.6G Hz Dual -c ore Intel ® 2.6G Hz Dual -c ore Intel ® 2.6G Hz Memory 2G B DDR3 2G B DDR3 2G B DDR3 Flash 512 MB (USB DOM) 512 MB (USB DOM) 51 2 MB (USB DOM ) CPU replaceable No No No Memory r eplacea ble No No No Number of SODI MM slots 2 2 2 Number of ha rd drive slots 4 6 8 Number [...]

13 System TS - 470 Pro TS - 670 Pro TS - 870 Pro CPU Dual -c ore Intel ® Core ™ i3 3.3 G H z Dual -c ore Intel ® Core ™ i3 3.3 G H z Dual -c ore Intel ® Core ™ i3 3.3 G H z Memory 2G B DDR3 2G B DDR3 2G B DDR3 Flash 512 MB (USB DOM) 512 MB (USB DOM) 512 MB (USB DOM) CPU replaceable No No No Memory r eplacea ble No No No Number of SODI MM s[...]

14 System TS - 1279U - RP TS - EC879U - RP TS - EC1279U - RP CPU Dual -c ore Intel ® Core ™ i3 3.30 GHz Quad -c ore Intel ® Xeon ™ 3. 2 0 GHz Quad -c ore Intel ® Xeon ™ 3. 2 0 GHz Memory 4 GB DDR3 RAM 4GB DDR3 ECC RAM 4GB DDR3 ECC RAM Fla sh 512MB (USB DOM) 512MB (USB DOM) 512MB (USB DOM) CPU replaceable No No No Memory r eplacea ble Yes Y[...]

15 System TS - 269 Pro TS - 469 Pro TS - 569 Pro CPU Dual - core Intel ® Atom™ 2.13 GHz Dual - core Intel ® Atom™ 2.13 GHz Dual - core Intel ® Atom™ 2.13 GHz Memory 1GB DDR3 (Expandable RAM, up to 3GB) 1GB DDR3 (Expandable RAM, up to 3GB) 1GB DDR3 (Expandable RAM, up to 3GB) Flash 512MB (USB DOM) 512MB (USB DOM) 512MB (USB DOM) CPU replace[...]

16 System TS - 469U - RP /SP TS - 869U - RP TS - 1269U - RP CPU Dual - core Intel ® Atom™ 2.13 GHz Dua l- core Intel ® Atom™ 2.13 GHz Dual - core Intel ® Atom™ 2.13 GHz Memory 1GB DDR3 (Expandable RAM, up to 4 GB) 2GB DDR3 (Expandable RAM, up to 4 GB) 2GB DDR3 (Expandable RAM, up to 4 GB) Flash 512MB (USB DOM) 512MB (USB DOM) 512MB (USB DO[...]

17 System IS - 400 Pro CPU Dual - core Intel ® 1.1 GHz Memor y 2 GB DDR3 Flash 512MB (USB DOM) CPU replaceable No Memory r eplacea ble No Number of SODI MM slots 2 Number of ha rd drive slots 4 (2.5" only) System TS -2 51 TS - 451 TS - 651 CPU Dual - core Intel ® Celeron ™ 2. 4 1 GHz Dual - core Intel ® Celeron ™ 2. 4 1 GHz Dual - core [...]

18 System TS - 851 CPU Dual - core Intel ® Celeron ™ 2. 4 1 GHz Memory 1GB /4GB DDR3 L (Expandable R AM, up to 8 GB) Flash 512MB (USB DOM) CPU replaceable No Memory r eplacea ble Yes (DDR3 L-1 333 SODIMM DRAM) Number of SODI MM slots 2 Number of ha rd drive slots 8 IR sensor MCE - compatible System HS - 251 CPU Dual - core Intel ® Celeron ™ 2[...]

19 (Expandable R AM, up to 8 GB) (Expandable R AM, up to 8 GB) (Expandable RAM, up to 8 GB) Flash 512MB (USB DOM) 512MB (USB DOM) 512MB (USB DOM) CPU replaceable No No No Memory r eplacea ble Yes (DDR3 L-1 333 SODIMM DRAM) Yes (DDR3 L-1 333 SODIMM DRAM) Yes (DDR3 L-1 333 SODIMM DRAM) Number of SODI MM slots 2 2 2 Number of ha rd drive slots 2 4 6 L[...]

20 Chapter 2. Power Button and R eset Button Behavior ! Power button: Press to tu rn on or turn off. System Power button (Turn on) Power button (Hardware turn off) Power button (Force turn off) All models Press once 1.5 sec 5 sec ! Reset but ton: Pr ess to reset t he system settin gs. System Basic syst em reset (1 beep) Advanced sy stem re set (2 b[...]

21 Advanced system reset (10 sec) P ress the res et button for 10 seconds; you will hear two beeps at the third an d the tenth seconds. The NAS will reset all the system settings to defaul t as it does by web - based system reset in “Administration” > “Restore to Factory Def ault” except all the d ata ar e reserved. The settings such as [...]

22 Chapter 3. USB One Touch Copy System Number of seconds (press the one touch copy button to trigger data copy ) All NAS models 0.5 sec Data Co py by the Fr ont USB Port The NAS supports instant data copy backup from th e external U SB device to the N AS or the other way round by the front one touch copy button. To use thi s function, follow the s[...]

23 Chapter 4. LED and Alarm B uzzer Specifications The LED indicators of the NAS indicate the system status and infor m ation. When the NAS is turned on, chec k the follow ing item s to m ake sure the syste m statu s i s normal. Note that the following LE D information is applicable only w hen users have properly inst alled the hard drive , and con[...]

24 LED Color LED Status Descrip tion Green The NAS is ready . Off All the hard disk drives on the NAS are in standby mode . LAN Orange Orange The disk data is being accessed from t he network and a re ad/write error occurs during the process. Flashes orange The NAS is being accessed from the network . 10 G bE 2 Green Green T he 10GbE network expans[...]

25 Beep alarm : All NAS models The beep alarm c an be disable d in “System Admini stration” > “Hardware Setti ngs”. Beep sound Number of Times Descrip tion Short beep ( 0.5 sec) 1 1. The NAS is starting up . 2. The NAS is being shut down (software shutdown ) . 3. The user presses the reset button to reset the NAS . 4. The system firmware[...]

26 Chapter 5. Upgrade Memory on QNAP Turbo NAS (RAM Module Installation) Warn ing : ! Th e following instr u ctions should only be performed by an authorized and trained technician. ! Strictl y adhere to the instructions t o install a RAM module on the NAS. Failure to do so could result in injury t o human body or death. QNAP pro vides different RA[...]

27 3. Loosen the three screws on the rear of the NAS. 4. Remove the case co ver of the NAS gently. 5. Locate the mem ory slot. Make sure the slot is empty. Note : For TS/SS - x53 Pro, TS - 651 and TS - 851 models, a lw ays e nsure t hat a memory mo dule i s in stalled in the Pr imary slot (re d). If not, then th e s ystem w ill fail to start. When [...]

28 6. Grasp the e dge of the memory module. Align the notc h on t he gold edg e of the modul e with the no tch i n the memory sl ot. Slide the memo ry module to the sl ot at a 45 - degree angle (approx imately ). 7. Gently pres s the memory m odule into the slot until it is seat ed fu lly. 8. Rotate the memory modul e towards the moth erboard u nti[...]

29 5.2 TS - x69U - RP /SP series (4/8/12 - bay) Follow the steps below to install a RAM module on the NAS. 1. Turn off t he NAS. Disconnect the power adapt or, network cable(s), and any other connectors or cables from the NAS. 2. Before ins talling the memory module, put on an antis tatic wrist strap to prevent electrostatic discharge. The crocodil[...]

30 4. Open th e NAS. 5. Slide the m emory module to the slot at a 45 - degree angle (approxi m ately) . 6. Press the memory module down while holding the clips open .[...]

31 7. Make su re the memor y modul e sits i n properl y wit h the cli ps in pl ace. 8. Close th e NAS cove r and fasten the sc rews. Connect the power adapt or and cables back to the N AS.[...]

32 5.3 TS - 879U - RP, TS - 1279U - RP, TS - EC879U - RP, TS - EC1279U - RP , TS - 1679U - RP, TS - EC1679U - RP , TS - 870U - RP, TS - 1270U - RP QNAP p rovide s a 4 GB DD R3* RA M modul e and a 4GB DDR3 ECC** RAM modul e (optional purchase) for users to upgrade the m emory of th e NAS. I nsert an extr a RAM module on the motherboard of the N AS t[...]

33 2. Hold t he not ch at the edge of the top cov er . Remove the top cover in bo th hands. 3. Release t he ejector cl ips gent ly by pulling them out of the sides of the RAM slot .[...]

34 4. Grasp the e dge of the RAM modul e . Align the notch on the gold edge of the RAM modul e with th e notch in the RAM slo t . Inse rt the RA M module to the RAM s lot un til it cannot go any further.[...]

35 5.4 TS - 251, TS - 451 Follow the steps below to install a RAM module on the NAS. 1. Turn off t he NAS. Disconnect the power adapt or, network cable(s), and any other connectors/cables from the NAS. 2. Remove any i nstalled hard drives from the NAS. 3. Before ins talling the memory module, put on an antistatic wrist strap to prevent electrostati[...]

36 5. Gently remove the case cover of the NAS by slidi ng it apart (see the underside of the NAS for visua l indi cators of the NAS case being l ocked/unl ocked) 6. Remove the f our inner scr ews (t wo on e ach s ide) of the ha rd drive cage. 7. If it is a 4 - bay NAS, you w ill also need to remove two scr ews on the top of the har d drive cage.[...]

37 8. Gently remove the hard drive cage from the NAS by l ifting i t out of its sl ot . 9. Always ensure that a memory m odule i s installed in the Primary slot (red) . If not, then the system wil l fail to start. When inst alling two memory modules, p leas e ensure that they are the same size and ideally use the same type of RAM for both memory sl[...]

38 10. Reattach the hard drive cage to the NAS. Please ensur e that it corr ectly plugs into the slot . 11. Secure the hard dr ive cage by fastenin g the four inner s crews (for the 4 - bay NAS, please fast en the two additional top screws.) Then re at tach the case cover of the NAS by gently sl iding it back together . 12. Fasten the two/four scre[...]

39 Chapter 6. Network Expansion Card Installation Warn ing : ! The following instr ucti ons should only be performed by an authorized and trained technician. ! Strictl y adhere to the instructions to instal l a network expansion card on the NAS. Failure to do so c ould result in i njury to human body or death. The TS - x79 Pro , TS - x70/x70 Pro se[...]

40 Network E xpansion Card Compatibi lity Bracket A ( X520 - T2) Intel ® Ethernet Server Adapter X520 - T2 (E10G42B) Bracket B (X520 - SR2 /X5 20 - DA2) 1. Intel ® Ethernet Server Adapter X520 - SR2 (E10G42BFSR) 2. Intel ® Ethernet Server Adapter X520 - DA2 (E10G42BTDA) Bracket C (Emule x) 1. Emulex OneCo nnect 10GbE Network Adapte rs, SFP+ Dire[...]

41 4. Remove the c ase cover of t he NAS gent ly. TS - 470/TS - 470 Pro:[...]

42 5. Loosen the screws and remove the expansion slot cover. 6. Grasp the edge of the network expans ion ca rd. Align the notch on the gol d edge of the card with the notch in the PCIe slot. Inse rt the n etwork e xpansion card to the PC Ie slot until it cannot go any further.[...]

43 7. Fasten the screws. 8. Close the case cover an d fasten the scre ws. Connect the power adaptor and cables to the NAS. 9. To c heck that the network expansion i s recognized by the NAS, power up the NAS and login the web inte rface as a n admin istrator. Go to “ System Admini stration ” > “ Network ” > “ TCP/IP ” and check the[...]

44 6.2 TS - 879U - RP, TS - EC879U - RP, TS - 1279U - RP, TS - EC1 279U - RP, TS - 1679U - RP, TS - EC1679U - RP 1. Turn off the NAS. Disc onnect the power adaptor, network cable(s), and any other connectors o r cables from the NAS. 2. Before installi ng the network expansion card, put on an anti static wrist str ap to prevent electrost atic di sch[...]

45 5. Loosen the 4 screws as shown in the illustr ation. 6. Grasp the m etal edge of t he ri ser card mod ule. Remove the modu le ge ntly.[...]

46 7. Loosen the screw and rem ove the expansion slot cover. 8. Inse rt the network expan sion card to the PCIe slot until it cannot go any further. Then fasten the screw.[...]

47 9. Grasp th e m etal edge of the riser card module. Align the notc h on the gold ed ge of the riser card with the notch in th e PCIe slot. Insert the riser card mod ule to the PCIe slot until it cannot go any further. 10. Fasten the screws. Clo se the case cover and fasten the screws. 11. Connect t he power a daptor an d cables to the NAS. 12. T[...]

48 6.3 TS - 870U - RP, TS - 1270U - RP 1. Turn off the NAS. Disc onnect the power adaptor, network cable(s), and any other connectors or cables from the NAS. 2. Before installi ng the network expansion card, put on an antistatic wrist strap to prevent electrost atic discharge. The crocodile clip should be connected to the ground. 3. Loosen the two [...]

49 6. Grasp the edge of the expansio n card. Align the notch on the gold edge of the card with the notch in the PCIe slot. Insert the n etwork expa nsion card to the PCIe slot until it cannot go any further. 7. Fasten the screws. 8. Close the case cover and f asten the screws. Connect the power adaptor and cables to the NAS. 9. To check that the ne[...]

50 Chapter 7. Hot -swap Hard Drives The QNAP NAS is compa tible with 2.5 - inch / 3.5 - inch SATA hard dis k drives from major hard disk brands. For the updated hard drive compatibility list , please visit http://www.qnap.com . Caution: ! QNAP dis claims any res ponsibility for product damage/malfunction or data loss/ recov ery due to misuse or imp[...]

51 System Supports 3.5 - inch S ATA Hard Drives Supports 2.5 - inch SATA Hard Drives Supports SSD Supports Hot - swapping Hard Dr ives (RAID 1 or above only) TS - 269 Pro, TS - 469 Pro, TS - 569 Pro, TS - 669 Pro, TS - 869 Pro, TS - 469U - RP /SP , TS - 869U - RP, TS - 1269U - RP , TS - 870U - RP, TS - 1270U - RP , TS - 470/470 , Pro, TS - 670/670 [...]

52 The NAS supports hot - swapping the hard d rives when 1 member drive crashes in RAID 1, 1– 2 member drives crash in RAI D 5 or RAID 6. Follow the steps below to hot - swap the hard drive when a member drive f ails in a RAID configura tion. 1. Login the NAS and check the disk volume configuration in “Volume Management”. 2. The volume stat u[...]

53 Chapter 8. RAID Recovery The QN AP NAS suppo rts exclusiv e RAID recovery technol ogy to recover a failed RAID disk volume from unintentional disconnection or rem oval of the hard d rives from the sys tem. Using the RAID recovery, users can recover an inactive RAID 1, RAID 5 , or RAID 6 volume to degraded mode, or an inact ive RAID 0 and JB OD c[...]

54 Standard RAID 5 QNAP RAID 5 Standard RAID 6 QNAP RAID 6 Degraded mode N-1 N-1 N- 1 & N -2 N- 1 & N -2 Read o nly p rotection (for immediate data backup & hard dri ve replacemen t) N/A N- 1, bad blocks found in t he survi ving drives of the array. N/A N- 2, bad blocks found in t he surviving drives of the array. RAID r ecovery (RAID s[...]

55 Chapter 9. Use the LCD Panel This featur e is only provided by the NAS models with LCD panels. Please vi sit http://www.qnap.com for details. The NAS provides a handy LCD panel for users to perform disk configuration and view th e system information. When the NAS has started up, the server nam e and IP address will be shown. N A S 5 F 4 D E 3 1 [...]

56 When RAID 1, RAID 5, or RAI D 6 co nfi guratio n is execu ted , the sy stem w ill initialize the hard drives, create the RAID device, format the RAID device, and mount i t as a volume on the NAS. T he progress will be sho wn on the LCD p anel. When it reaches 100%, the RAID volume can be accesse d. U sers can create share folders and upload file[...]

57 View system i nformation by the LCD panel When the LCD panel shows the s erve r n ame a nd IP a ddress, press the “En ter” b utto n to enter the Main Me nu. The Main Menu consist s of the following i tems: 1. TCP/IP 2. Physical disk 3. Volume 4. System 5. Shut down 6. Reboot 7. Password 8. Back 1. TC P/ IP T he following opti ons are availab[...]

58 2. Physica l disk T he following opti ons are available : ! Disk I nfo ! Back to Main M enu The disk inf o shows the temperature and t he capacity of the hard drive. D i s k : 1 T e m p : 5 0 ° C S i z e : 2 3 2 G B 3. Volume This secti on shows the dis k configurat ion of the NAS. The first line sh ows the RAID configuration and storage capaci[...]

59 4. System This section shows the system temperature and the rotation speed of the system fan. C P U T e m p : 5 0 ° C S y s T e m p : 5 5 ° C S y s F a n : 8 6 5 R P M 5. Shut down Use th is o ption to turn off the NAS. Press th e “Sel ect” button to select “Yes ”. Then press the “ Enter” butt on to confir m . 6. Reboot Use thi s o[...]

60 System Messages W hen the NAS encounters system error, an error message will be show n on the LCD panel. Press the “Enter” button to view the message. Press the “ Enter” button again to view the next message. S y s t e m E r r o r ! P l s . C h e c k L o g s Syste m Me ssage Descrip tion Sys. Fan Fai led The system fan fails Sys. Overhea[...]

61 Chapter 10. Install Power Supply Unit Note: ! This secti on applies t o rackmount NAS models only. ! The pow er supply units of TS - 879U - RP, TS - EC879U - RP, TS - 469U - RP/SP, TS - 869U - RP, and TS - 1269U - RP should onl y be repl aced by an authorized and trained technician. 10.1 1U Turbo NAS Note: The fol lowing instructions shoul d onl[...]

62 4. Fasten the screw tightl y. 5. Turn on the NAS. Note: To replace a failed power supply unit, tur n off the NAS. Then remove the failed unit safely and repeat steps 3 - 5 above to i nstall a new power supply uni t.[...]

63 10.2 TS - 469U - RP /SP Note: The fol lowing instructions shoul d only be per formed by an aut horized and trained technician. Follow the steps below to replace a fail ed power supply unit on the TS - 469U - RP /SP . 1. Turn off the NAS. 2. Press the green lever and remove the defective po wer supply unit . 3. Insert a new po wer supply u nit an[...]

64 Warn ing : The NAS supports replacing the redundant power supply unit without turning off the se rver when redun dant power supp ly m ode is enabled. Ho wever, users are strongly recommended to turn OFF the NAS before replacing the power supply unit to reduce the risk of ele ctric shock. A second power supply unit can be inst alled on a single p[...]

65 3. Unplug t he fai led power supply. 4. Plug in a new power supply to t he NAS. 5. Turn on the NAS.[...]

66 10.4 2U Turbo NAS (except TS - 1279U - RP and TS - EC1279U - RP) Note: The following instructi ons should only be performed by an authorize d and traine d technician. To replace a failed power s upply unit on a 2U Turbo NAS, follow t he steps below. 1. Turn off t he NAS. 2. Unfasten the screw on t he fai led power supply in an antic lockwise dir[...]

67 4. Plug in the new power supply to the NAS. 5. Fasten the screw on th e power supply in clockwise direction. 6. Turn on the NAS.[...]

68 Enable warn ing ale rt for redun dant power su pply on the web - based interf ace: If two pow er supply units (PSU) have been install ed on the NAS and connected to the power sockets , both PSU will supp ly the power to the NAS ( ap plied to 1U and 2U models). Users can enable redundant power supply mode in “System Adm inistration” > “H[...]

69 The following descri ption applies to 1U NAS models only. (1) Power supply indi cators: # Green ( left) powe r indicat or: I ndicates t he power sup ply u nit is i n normal st atus. # Red ( right ) power indicator: Indicates the power supp ly unit is in abnormal status. (2) Mute power ala rm but ton: When an erro r is d etected on power s upply [...]

70 Technical Support QNAP pro vides dedicated o nline suppor t and cust omer service via i n stant messenger. Online Suppor t: http://helpdesk.qnap. com / Forum: http://forum.qnap. com Technic al Support i n the USA and Canada: Email: q_support us@qnap.com TEL: +1 - 909 - 595 - 2782 #3 Address: 168 Uni versity Par kway, Pomona CA 91768 Service Hour[...]

71 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 20 07 Copyright © 2007 Fr ee Software Foundat ion, Inc. <ht tp://fs f.org/> Everyone is permitt ed to copy and distri bute verbatim copies of this li cense document, but changing it is not allowed. Preamble The GNU Gener al Public License is a f ree, copyleft license for sof tware and other ki[...]

72 on the software, and (2) offer you this License giving you legal per mission to copy, distribute and/or modify it. For the dev elopers' and authors' protecti on , the GPL clearl y explains that there is no warran ty f or t his free software. For both users' an d authors' sake, t he GPL requ ires that modif ied ver sions b e m[...]

73 A “covered w ork” means either t he unmodified Program or a work based on the Program. To “propagate” a w ork means to do anything with it that, without permission, would make you directly or secondarily liable f or infringement under appl icable copyr ight law, except executing it on a computer or modifying a pri vate copy. Propagation [...]

74 The “Corresponding Source” for a work in object code f orm means all the source c ode needed to generate, install, and (f or an executable work) run the object code and to modify the work, includ ing scripts to contro l those activities. How ever, it does not inclu de the work's System Li braries, or general - purpose tools or generall [...]

75 20 December 1996, or similar laws prohibiti ng or restr icting ci rcumvention of such measur es. When you conv ey a co vered wo rk, you w aive any legal power to for b id circumvention of technological m easures to the extent such circu mvention is effe cted by exercisin g rights under this License with respect to the covered work, and you discl[...]

76 A compil ation of a covered work with other separa te and ind ependent works, which are not by their nature extensions of the covered w ork, and which are not combined with it such as to form a larger prog ram, in or on a volum e of a storage or d istribution medium , is called an “aggregate” if the compilat ion and its re sulting copyright [...]

77 general publi c at no cha rge under subsec tion 6d. A separable portion of the obj ect code, w hose source c ode is exc luded from t he Correspondi ng Source as a System Lib rary, n eed not be incl uded in conveying the object code work. A “User Prod uct” is either (1) a “consumer product”, which means any tangible personal property whic[...]

78 Correspondi ng Source convey ed, and Installati on Information provided, in accord wit h this section must be in a format that is publicl y docu mented (and with an implementation available to the public in source code f orm ), and must r equire no special password or key for unpac king, read ing or cop ying. 7. Additional Terms. “Additional p[...]

79 lice nsors and authors. All other non - permissive additional t erms are consi dered “furt her restr ictions” within the meani ng of sect ion 10. If the Program as you recei ved it, or any part of it, cont ains a notic e stating that it is governed by this License along w ith a term that is a further restrictio n, you may r emove th at t erm[...]

80 9. Acceptance Not Required for Having Copies. You are not required to accept this Licens e in order to receive or run a copy of the Program. Ancillar y propagati on of a co vered work occ urring s olely as a consequence of using peer - to - peer transmission to receive a copy li kewise does not require acceptance. However, nothing other than thi[...]

81 modif icatio n of t he c ontribut or ver sion . For purpo ses of this d efinit ion, “contr ol” i nclu des the right to grant patent sublicense s in a manner consistent with the require ments of this License. Each co ntr ibutor grants you a non - exclusive, worldwide, royalty - free patent license under the contributor's es sential paten[...]

82 connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilati ons that contain the covered work, unless you entered into that arrangement, or that patent license was gr anted, pri or to 28 March 2007. Nothing in this Li cense shall be cons[...]

83 If the Program specifies tha t a proxy can decide w hich future ve rsions of the GNU General Public License can be used, that proxy's publ ic statement of acceptance of a version permanently author izes you to choose that version for the Program. Later license versions may give you a ddit ional or different permissions. However, no addition[...]

84 Appendix A: Product Compliance Class NAS Models FCC CE TS - EC1679U - RP Class A Class A TS - EC1279U - RP Class A Class A TS - EC879U - RP Class A Class A TS - 1679U - RP Class A Class A TS - 1279U - RP Class A Class A TS - 1270U - RP Class A Class A TS - 1269 U- RP Class A Class A TS - 879U - RP Class A Class A TS -8 70 U - RP Class A Class A [...]