Yamaha CC-50 manuel d'utilisation

Active Servo Technology CC-50 Natural Sound Mini Component System Chaîne Mini de la série “Natural Sound” Natural Sound Mini Komponenten-System Natural Sound Mini Komponent System Sistema di Componenti Mini a Suono Naturale Sistema de Componentes con Sonido Natural Natural Sound Mini Component Systeem OWNER‘S MANUAL MODE D‘EMPLOI BEDIENUN[...]

● Remote control transmitter ● Télécommande ● Fernbedienung ● Fjärrkontroll ● Telecomando ● Controlador remoto ● Afstandbediening ● Batteries (size AA, UM/SUM-3, R6, HP-7) ● Piles (format AA, UM/SUM-3, R6, HP-7) ● Batterien (Größe AA, UM/SUM-3, R6, HP-7) ● Batterier (Storl. AA, UM/SUM-3, R6, HP-7) ● Batterie (dimensioni[...]

INTRODUCTION CONTENTS E-1 English ENGLISH Page PRECAUTIONS ..................................................................2-3 ACTIVE SERVO TECHNOLOGY ..........................................3 NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS ........................................................4-6 REMOTE CONTROL TRANSMITTER................[...]

NOTE Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws. IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place[...]

A CTIVE SER V O TECHNOLOGY Active Servo Processing Amplifier Port Cabinet High- amplitude bass sound Signals of low amplitude Negative-impedance output drive Air woofer (Helmholtz resonator) Signals E-3 English The theory of the Active Servo Technology is based upon two major factors, the Helmholtz resonator and negative- impedance drive. Active Se[...]

NAMES OF CONTROLS, INDICA T ORS AND REAR P ANEL P AR TS E-4 CD Play er (CDX-S50) 1. Disc Table 2. RESUME button 3. OPEN/CLOSE Button: 4. RANDOM Play Button 5. SKIP Buttons: / ( SEARCH Buttons: / ) 6. Stop Button: 7. Play/Pause Button: / 8. Track Number Indicator 9. Time Display 10. (S, F) REP EAT Indicator 11. RANDOM Play Indicator 12. PROG RAM Ind[...]

E-5 English NAMES OF CONTROLS, INDICA T ORS AND REAR P ANEL P AR TS Double Cassette T ape Deck (KXW -S70) 50. DECK A Cassette Compartment 51. DECK A Select Button and Indicator 52. DECK B Select Button and Indicator 53. DECK B Cassette Compartment 54. Stop Button: 55. Play Direction Indicator ( ) 56. DECK A EJECT Button 57. Fast Wind Button: 58. Pl[...]

E-6 NAMES OF CONTROLS, INDICA T ORS AND REAR P ANEL P AR TS FREQUENCY STEP switch (General model only) Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disconnect the AC supply lead of this unit from[...]

Names of contr ol buttons ■ Receiver Control Buttons 1. Remote Control Transmitter Window 2. Preset Station Number Buttons 3. A, B, C, D, E Selector Buttons 4. PRESET DOWN/UP Buttons 5. A/B/C/D/E Button 6. EFFECT LEVEL Down ( – )/Up ( + ) Buttons 7. POWER Switch 8. SLEEP Button 9. DISPLAY Button 10. DSP On/Off Button 11. VOLUME Down ( – )/Up [...]

■ CD Player Control Buttons 15. Track Number Input Buttons 16. TIME Button 17. SKIP Buttons: / ( SEARCH Buttons: / ) 18. REPEAT Button 19. RANDOM Button 20. STOP Button: 21. PLAY/PAUSE Button: 22. EDIT Button 23. TAPE Button 24. PROG RAM Button ■ Tape Deck Control Buttons 25. Play Button: 26. Stop Button: 27. Play Button: 28. DECK A/B Select Bu[...]

E-9 English 30° 30° Remote control sensor 0.2 m – 6 m (8” – 20’) Loading the batteries f or the remote contr ol transmitter 1 Remove the battery compartment cover. (Press the left edge of the cover to right with a finger, and then pull it upward.) 2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compa[...]

E-10 AM ANT GND FM ANT 75 Ω UNBAL. Placing the system This system can be placed any way you like, however, be sure not to place another unit or any object on top of the receiver to prevent the ventilation holes on the top panel of the receiver from being obstructed. If doing so, it may damage the receiver. Notes • If the system is put in a rack[...]

E-11 English Speaker connection Connect each speaker wire to the SPEAKERS terminals. Cautions • Do not let the bare speaker wires touch each other as this could damage the receiver and/or speakers. • When connecting the speakers to the unit, be sure to connect the speaker wires properly. Do not mistake the right channel for the left channel and[...]

OPEN/CLOSE THE CONTROL DOOR When it is not necessary to operate controls inside the control door, close the door. To open or close the door, press the right edge until it clicks. E-12 STANDBY mode While the power is on, pressing the POWER switch (or the POWER switch on the remote control transmitter) switches the system to the STANDBY mode. (In thi[...]

E-13 English 1 While the power is on, press the DISPLAY button to display the time. If the power is off, you can proceed to the next step. 2 While pressing the TIME ADJUST button, press the HOUR button and set the hour. * Press the HOUR button once to advance the time by 1 hour. Press and hold to advance continuously. 3 While pressing the TIME ADJU[...]

The Digital Sound Field Processor (DSP) built into this unit presents you with the ambience of an actual concert hall, jazz club, etc. by adding effects as sonic reflections or reberverations that create the sound environment of a hall etc. This unit provides the following 4 DSP modes that simulates actual sound environments. E-14 DIGIT AL SOUND FI[...]

E-15 English COMP A CT DISC PLA YER OPERA TION DIGIT AL SOUND FIELD PROCESSOR (DSP) CONTR OL Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. • Do not write on e[...]

E-16 CD pla yback 1 Select the CD player so that “CD” appears on the display by pressing the INPUT selector or button. 2 Press the OPEN/CLOSE button to open the disc table. 3 Place a disc on the table, label side up. * 8 cm (3”) disc can be played without an adaptor. 4 Press the OPEN/CLOSE button to close the disc table. * The total number of[...]

E-17 English 12 3 4 5 12 3 4 5 67 8 67 8 9 0 E + I0 TUNER DIRECT - + 12 3 4 5 12 3 4 5 67 8 67 8 9 0 AB C D E TIME PROG TAPE EDIT + I0 STOP PLAY/PAUSE RANDOM REPEAT CD TUNER TAPE PRESET DOWN UP PLAY STOP REC/PAUSE SLEEP POWER DISPLAY VOLUME DECK PHONO/AUX TUNER DIRECT A/B A/B/C/D/E PLAY EFFECT LEVEL DSP MODE SP/PHONES - + COMP A CT DISC PLA YER OPE[...]

E-18 COMP A CT DISC PLA YER OPERA TION - + 12 3 4 5 12 3 4 5 67 8 67 8 9 0 AB C D E TIME PROG TAPE EDIT + I0 STOP PLAY/PAUSE RANDOM REPEAT CD TUNER TAPE PRESET DOWN UP PLAY STOP REC/PAUSE SLEEP POWER DISPLAY VOLUME DECK PHONO/AUX TUNER DIRECT A/B A/B/C/D/E PLAY EFFECT LEVEL DSP MODE SP/PHONES - + “Skip search” and “Manual search” are perfor[...]

E-19 English COMP A CT DISC PLA YER OPERA TION Pr ogram play You can program up to 20 tracks in any desired order. 1 Load a disc and close the disc table. 2 When in the stop mode, press the PROGRAM button to prepare for programming. * “PROG” and “P-01” illuminate on the display, and all track numbers on the disc begin flashing. 3 Use the tr[...]

/ E-20 To stop program play • Press the stop button. The first track number programmed will be displayed. • To resume playback, press the play/pause / button. Playback will begin from the beginning of the program. To cancel a programmed sequence There are several methods as described below. • Press the stop button while the unit is stopped. ?[...]

E-21 English Repeat pla y An entire disc, a single track or a programmed sequence can be continuously repeated. 1 While watching the display, press the REPEAT button once or more to select a desired repeat play mode (S REP or F REP). 2 Press the play/pause button. Repeat play modes SINGLE REPEAT (S REP) A single track is played back repeatedly. * T[...]

TRACK 2 3 4 5 6 7 8 9 10 11 12 HALL DSP ON TRACK REMAIN 2 3 4 5 6 7 8 9 10 11 12 HALL DSP ON TRACK TOTAL 2 3 4 5 6 7 8 9 10 11 12 HALL DSP ON TRACK TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 HALL DSP ON E-22 Random pla y The tracks on the disc can be played back in a random order. 1 Load a disc and close the disc table. 2 Press the RANDOM button to begi[...]

E-23 English Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning). A utomatic tuning 1 Select the tuner so that “TUNER” appears on the display by pressing the[...]

E-24 TUNING OPERA TION Preset tuning This unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations (8 stations x 5 areas) can be stored. To store stations (Example: To store a station to A1) 1 Tune to a desired s[...]

E-25 English A utomatic preset tuning You can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page. 1 Select the tuner so t[...]

E-26 E-26 Detection hole Tab T APE DECK OPERA TION General inf ormation • Do not use C-120 tapes, tapes with internal reels or poor- quality tapes, since they can cause malfunctions. • Before loading a tape into the cassette compartment, tighten the slack tape with a pen or pencil. • Tapes have removable tabs which prevent accidental recordin[...]

E-27 English T ape A or tape B playbac k 1 Select the tape deck so that “TAPE” appears on the display by pressing the INPUT selector or button. 2 Open the DECK A or DECK B cassette compartment by pressing the EJECT button. 3 Load the tape into the DECK A or DECK B cassette compartment, and close the lid panel completely by pressing the upper pa[...]

E-28 Winding the tape 1 If during playback, first press the stop button. 2 Next press the fast wind or fast wind button to wind the tape. 3 Press the stop button to stop. * While winding the tape, the corresponding play direction indicator flashes rapidly. Note When the tape is wound to the end, this unit will then function as described below, acco[...]

E-29 English Continuous pla ybac k 1 Load the tapes into the DECK A and DECK B cassette compartments. 2 Set the reverse mode switch to . The reverse mode switch can be operated before or during playback, and changes tape playback as follows: 3 Press the DECK A or B select button to select the tape to be played back first. 4 Press the play button to[...]

Side A only Side B only Side A → Side B Side B only Side A → Side B Side B only • When recording important selections, be sure to make a preliminary test to ensure that the desired source material is being properly recorded with good sound quality. • The automatic recording level control circuit automatically controls the level of the input[...]

E-31 English To stop recording temporarily 1 Press the stop button of the CD player. 2 Choose the selection to be recorded next by using the SKIP or button, and then press the play button of the CD player to resume recording (or simply press the track number input button on the remote control transmitter). To stop recording Press the stop button of[...]

E-32 Recor ding CD on both sides of a tape automatically 1 Select the CD player so that “CD” appears on the display by pressing the INPUT selector or button, and load the disc to be recorded. 2 Load a tape into the cassette compartment. 3 When recording with the Dolby NR system, set the Dolby NR switch to B or C; if not, set it to OFF. * For se[...]

E-33 English A utomatic tape-editing This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each[...]

E-34 RECORDING A COMP A CT DISC Note The CD player’s repeat play mode will be canceled during this recording mode. To cancel tape-editing function Before recording, press the stop button of the CD player or the tape deck. To stop recording Press the stop button of the tape deck. (At this time, CD playback automatically stops.) T o make this unit [...]

E-35 English RECORDING A COMP A CT DISC T o record pr ogrammed tracks 1 Select the CD player so that “CD” appears on the display by pressing the INPUT selector or button, and load the disc to be recorded., and load a disc on the disc table. 2 Follow steps 2–5 on page 33. 3 Press the PROGRAM button. * “PROG” and “P-01” illuminate on th[...]

E-36 Recor ding from the b uilt-in tuner 1 Select the tuner so that “TUNER” appears on the display by pressing the INPUT selector or button. 2 Tune to the desired station. (Refer to the “TUNING OPERATION” on pages 23 and 24.) 3 Load a tape into the cassette compartment. 4 When recording with the Dolby NR system, set the Dolby NR switch to B[...]

Dubbing • During dubbing, adjusting the VOLUME, BALANCE, TREBLE and BASS controls have no effect on the recorded sound. If, however, the DSP is on, the DSP effect is recorded along with the source. * Music with DSP effect is suitable for listening to inside a car etc. • Try to use the same tape formula and length for the recording tape as for t[...]

E-38 HO W T O USE THE BUIL T -IN TIMER Timer pla y By using the built-in timer, you can set the time when the unit turns on and a source begins playing automatically, and the time when the unit turns off automatically. 1 Prepare the source to be played. For tuner: Tune in to the station you will listen to. For tape deck: Load a tape into the casset[...]

E-39 English ➂ At ON TIME/time setting mode [“ON TIME” appears on the display, and soon it is changed to a time setting mode.] Set to the time when the timer play begins by using the HOUR button and the MINUTE button. ➃ At OFF TIME/time setting mode [“OFF TIME” appears on the display, and soon it is changed to a time setting mode.] If n[...]

E-40 To begin CD playback from a desired track by the timer play. 1. Play back the track which you want to play back from the beginning of the timer play. 2. Press the RESUME button on the CD player so that “ ” appears on the display. 3. Make the timer play setting. 4. Turn the power off while the track is being played back. when the time comes[...]

E-41 English HO W T O USE THE BUIL T -IN TIMER Sleep timer operation This unit can be turned off automatically. 1 Play the desired sound source. 2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “120”. 3 Press the SLEEP button repeatedly until the desired sleep time appears in the display. The display will[...]

E-42 INPUT PHONO AUX R L A uxiliary (A UX) 1 Connect the output lead of a video cassette player, video disc player, etc. to the AUX inputs of this unit. (red → right channel, white → left channel) 2 Press the INPUT selector or button once or more until “AUX” appears on the display. 3 Operate the unit connected to the AUX inputs. 4 Start rec[...]

E-43 English PHONES Headphones • Be sure that your headphones have a 3.5 mm (1/8”) diameter plug and are between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms. • When headphones are connected, the speakers are defeated automatically. Adjust the VOLUME control for desired volume. Internal care • Dirty heads, capstans and pi[...]

E-44 SPECIFICA TIONS As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. ■ Receiver (RX-S50) Minimum RMS Output Power per Channel 6 ohms, 50 Hz to 20 kH[...]

E-45 English E-45 CAUSE AC supply lead is not plugged in. Loose speaker connections. Internal protection circuit is functioning. Interference from starting motor of nearby car. Interference from thermostat of nearby electrical appliance. Antenna input is too weak due to obstructions or excessive distance from broadcasting station. Insufficient ante[...]

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 7731[...]