Yamaha CLP-920 manuel d'utilisation

IMPOR T ANT Check y our power supply Make sure that y our local AC mains voltage matches the v olt- age specified on the name plate on the bottom panel. In some ar- eas a voltage selector ma y be provided on the bottom panel of the main ke yboard unit near the pow er cord. Make sure that the v oltage selector is set for the volt- age in your area. [...]

92-469 1 ENVIRONMENTAL ISSUES: Yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This [...]

3 CLP-920 • Take care that the key cover does not pinch your fingers, and do not insert a finger or hand in the key cover gap. • Never insert or drop paper or metallic or other objects between the slits of the key cover and the keyboard. If this happens, immediately turn off the power and remove the electric plug from the outlet and have the in[...]

4 CLP-920 Contents The Control Panel ......................................................... 5 Key Cover & Music Stand ............................................ 6 ● K ey Co ver .............................................................. 6 ● Music Stand ........................................................... 6 Connections .......[...]

5 CLP-920 The Control Panel Soft pedal 1 [PO WER] Switch Press the [POWER] switch once to turn the power ON, a second time to turn the power OFF . When the power is turned ON, the POWER indicator (located to the left of the keyboard) will light. 2 [MASTER V OLUME] Control The [MASTER V OLUME] control adjusts the volume (level) of sound produced by [...]

6 CLP-920 Key Cover & Music Stand T o open the ke y cover: Z Lift the cover slightly . X Slide the cover open. CAUTION • Hold the cover with both hands when mo ving it, and do not release it until it is fully opened or closed. Be careful to av oid catching fingers (y ours or others) between the co ver and main unit. • Do not place objects o[...]

7 CLP-920 TO HOST HOST SELECT PC-1 PC-2 Mac MIDI PEDAL AUX IN RL / L+R AUX OUT RL / L+R MIDI IN OUT THRU HOST SELECT TO HOST MIDI Mac PC-2 PC-1 Bottom P anel Connections 1 A UX OUT L/L+R and R Jacks The AUX OUT L/L+R and R jacks deliver the output of the Clavinova for connection to an instrument amplifier , mixing console, P A system, or recording [...]

8 CLP-920 T urn P ower On ................................................................................................... After making sure that the Clavinova’ s AC cord is properly plugged into the Clavinova itself and plugged into a convenient AC wall outlet, press the [POWER] switch located to the right of the keyboard to turn the power ON[...]

9 CLP-920 The CLP-920 includes f our demo tunes that demonstrate its sound capabili- ties. Here is ho w you can select and pla y the demo tunes: NOTE • No MIDI reception occurs in the demo song mode. • The demo song data is not transmitted via the MIDI connectors . * See page 28 for a complete listing of the demo tunes. Playing the Demonstratio[...]

10 CLP-920 The Pedals Soft (Left) P edal ............................................................................................... The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes which are already playing when it is pressed. Damper (Right) P eda[...]

11 CLP-920 T ransposition Z Simultaneously press and hold the A-1 and C # 0 keys. X Press any key between F # 2 and F # 3 according to the desired amount of transposition.* C Release the A-1 and C # 0 keys. The A-1 and C # 0 keys plus keys F # 2 through F # 3 on the keyboard are used for transposition. The Clavino va ’ s TRANSPOSE function makes [...]

12 CLP-920 T uning T uning makes it possible to adjust the pitch of the Cla vinov a ov er a 427.0 Hz … 453.0 Hz (corresponding to the A3 note ’ s Hz) range in appro ximately 0.2 Her tz inter vals . Pitch control is useful f or tuning the Clavino va to match other instruments or recorded music. T uning Up ........................................[...]

13 CLP-920 MIDI T ransmit & Receive Channel Selection ................................................................................................... Tone Generator MIDI IN MIDI IN MIDI THRU DOU-10 MIDI OUT Clavinova (Set to receive on MIDI channel 2) (Set to receive on MIDI channel 1) MIDI Functions ● A Brief Intr oduction to MIDI DOU-10[...]

14 CLP-920 A -1 C # 0 C 1 D # 2 C 4 D # 5 13568 1 0 1 2 1 3 1 5 135 68 1 0 1 2 1 3 1 5 2 4 7 9 11 14 16 2 4 7 9 11 14 16 E 5 E 2 ● Setting the Cla vinova MIDI Channels F or setting the transmit channel. (C1 ~ D # 2) F or setting the receive channel. (C4 ~ D # 5) For ALL mode Z Simultaneously press and hold the A-1 and C # 0 keys. X Press the key [...]

15 CLP-920 Connecting to a Personal Computer Although the Cla vinov a can be connected to a personal computer via the MIDI IN/OUT connectors and a MIDI interf ace, the T O HOST connector and HOST SELECT s witch allow direct connection to Apple Macintosh or IBM-PC/A T personal computers f or sequencing and other music applications without the need f[...]

16 CLP-920 Connecting to an IBM-PC/A T Series Computer ............ Connect the T O HOST connector of the Clavinova to the RS-232C port on your IBM computer , using a standard 8-pin MINI DIN → 9-pin D-SUB cross cable. Set the HOST SELECT switch to the “PC-2” position. Refer to your software owner ’ s manual for information on any settings y[...]

17 CLP-920 Connecting to a Personal Computer Using a USB Interface (such as the Y amaha UX256) Connect the USB interface (Y amaha UX256 or equivalent) to your computer using a USB cable. Install the driver software supplied with the interface (or other appropriate driver software) on your computer according to the supplied instructions. Connect you[...]

18 CLP-920 T roubleshooting If y ou encounter what appears to be a malfunction, please check the f ollow- ing points bef ore assuming that your Cla vinov a is f aulty . 1 . No Sound When the P ower is T urned ON Is the AC plug properly connected to the Clavinova and an AC wall outlet? Check the AC connection carefully . Is the MASTER VOLUME control[...]

19 CLP-920 Damper Pedal 0 (off) Sostenuto 0 (off) Soft Pedal 0 (off) (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the dam[...]

20 CLP-920 MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime [...]

21 CLP-920 YAMAHA [Clavinova] Date: 1 March, 2000 Model: CLP-920 MIDI Implementation Char t Version: 1.0 Function Transmitted Recognized Remarks Basic Default 1 1 Channel Changed 1~16 1~16 Default 3 1 *1 Poly Mode only Mode Messages XX Altered ***************** X Note 15~114 0~127 Number : True voice ***************** 21~108 Velocity Note on O 9nH,[...]

22 CLP-920 Assembly Parts / Bauteile / Éléments à assembler / Partes del conjunto CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use the correct screw siz[...]

23 CLP-920 1 Assemblage du support de clavier PRECAUTION • Veiller à ne pas mélanger les pièces et à les installer dans le sens correct. Veuillez assembler l’instrument dans l’ordre indiqué ci- dessous. • La présence de deux personnes minimum est nécessaire pour pro- céder au montage. • Toujours utiliser des vis aux dimensions cor[...]

24 CLP-920 2 X Schrauben Sie die Rückwand (B) an die bei- den Seitenwände (D). Die Rückwand (B) wird mit den Winkelblechen an beiden Enden nach hinten weisend an den Seitenwänden (D) befestigt. Lassen Sie dabei die Führungsnasen an den Seitenwänden in die Schlitzbohrungen in den beiden Winkelblechen greifen, und drücken Sie die Rückwand dan[...]

25 CLP-920 10 cm 10 cm 3 X Fixez le panneau arrière (B) aux panneaux latéraux (D) Le panneau arrière (B) doit être posé entre les panneaux laté- raux (D) en prenant soin de diriger la ferrure située à chaque extrémité vers l’arrière du support. Placez les orifices carrés des ferrures du panneau arrière sur les languettes dépassant d[...]

26 CLP-920 4 5 V Schließen Sie das Pedalkabel an. Das vom Pedalkasten kommende Pedalkabel wird an die PEDAL- Buchse hinten an der Unterseite der Tastatureinheit angeschlossen. Bringen Sie nach dem Anschluß die Kabelhalter an der Seitenwand an, um das Kabel dann in diese Halter zu klemmen. B Den Spannungswähler einstellen. Bevor Sie nun das Netzk[...]

27 CLP-920 V Raccordez le câble du pédalier Le câble du pédalier qui sort du logement de pédalier doit être raccordé au connecteur PEDAL implanté à l’arrière du panneau de dessus de l’instrument. Une fois branché, fixez les attaches de câble sur le panneau latéral en procédant de la façon représentée sur la figure, puis emboît[...]

28 CLP-920 Voice Name Title Composer GRAND PIANO Étude op. 10-5 “Black Key” F.F.Chopin E.PIANO Clair de lune C.A.Debussy CHURCH ORGAN Organ Concerto op.4 No.2 G.F.Händel STRINGS Brandenburgisches Konzert No.3 J.S.Bach • Some of the demonstration pieces listed above are short rearranged excerpts from the original compositions. • Bei manche[...]

29 CLP-920 KEYBOARD POLYPHONY VOICES REVERB CONTROL PEDAL CONTROLS OTHER CONTROL JACKS/CONNECTORS INPUT & OUTPUT LEVEL/IMPEDANCE MAIN AMPLIFIERS SPEAKERS DIMENTIONS without music stand (W x D x H) with music stand WEIGHT CLP-920 88 KEYS (A-1 ~ C7) 32 NOTES MAX. GRAND PIANO, E.PIANO, CHURCH ORGAN, STRINGS ON/OFF SOFT, DAMPER MASTER VOLUME PHONES[...]

WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre- cautions include, but are not limited to, the following: 1. Read all Safety Instructions, Installation Instructions, Special Message Section items, and any Assembly Instructions found in this manual BEFORE marking any connections, in-[...]

For details of products, please contact your nearest Y amaha or the authorized distributor listed belo w . Pour plus de détails sur les produits, veuillez-vous adresser à Y amaha ou au distributeur le plus proche de v ous figurant dans la liste suiv ante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Y am[...]

FCC INFORMA TION (U .S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions con- tained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to acce[...]