Zanussi WJS 1265 W manuel d'utilisation

W ASHER-DR YER WJS 1265 W WJS 1465 W WJS 1665 W SYNTHETICS DELICATES COTTONS WOOL 60°C 50°C 90°C 40°C 1200 900 700 500 RINSE HOLD S T A R T / P A U S E R E S E T DELAY WJS 1265 W SKIP EXTRA DRY STORE DRY IRON DRY COTTONS SYNTHETICS D R Y I N G T I M E HAND WASH PREWASH EXTRA RINSE QUICK WASH F A B R I C S O P T I O N S S P I N S P E E D T E M P[...]

2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst[...]

3 Contents F or the User Important Safety Information 2 Y our New W asher-Dryer 4 Description of the Appliance 5 Door locked light 5 Detergent dispenser drawer 5 The Control Panel 6-10 Operating sequence 1 1-14 W ashing 11 Load the laundry 1 1 Measure out the detergent 1 1 Measure out the fabric softener 1 1 Switch the machine on 1 1 Select the req[...]

4 Y our New W asher-Dryer Y our new washer -dryer , fitted with the Zanussi “JET SYSTEM”, meets all moder n requir ements for ef fective treatment of laundry with low water , energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control Panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet Door lock ed light It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 13). Deter gent dispenser dr a wer Prewash Main wash [...]

6 The Contr ol Panel Maximum temperatures are 90°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be hand-washed (HAND W ASH programme). Important! By pressing the TEMPERA TURE and SPIN SPEED buttons simultaneously , the acoustic signal at the end of the cycle is deactivated. By pressing these 2 buttons ag[...]

7 - Select spin speed by means of button 5, and press the ST AR T/P AUSE button. • Drain only - Press the SKIP/RESET button once , so as to cause the DRAIN light to light up, then press the ST AR T/P AUSE button. Important! If you accidentally press the SKIP/RESET button more than once, the display will show three blinking dashes . T o cause the [...]

8 • Selected drying time in minutes or hours and minutes. After the programme has started the time remaining is updated every minute. • The washing machine has stopped with water in the tub , at the end of a programme with the RINSE HOLD option: this is indicated by a static zero . • The washing machine has completed the programme : this is i[...]

9 When you P AUSE the cycle, the DOOR LOCKED light goes out, and it becomes possible to open the door , provided • the machine is not in the heating or drying phase; • the level of the water is not high; • the drum is not turning. Important! Y ou must set the washing machine to P AUSE before you make any change in the programme in progress. ?[...]

10 12 DELA Y button This button makes it possible to delay the starting of the programme by up to 24 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. Y ou must select this option after you have set the programme and before you press the ST AR T/P AUSE button. The ti[...]

11 Operating Sequence W ASHING Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. 1. Load the laundr y Open the door . Place the laundry in the drum, o[...]

12 6. Select the temper atur e Press the TEMPERA TURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up. 7. Select the spin speed or the RINSE HOLD option Press the SPIN SPEED button repeatedly , in order to select the desired spin speed or the RINSE HOLD option[...]

13 11. Ho w to change a pr ogr amme during its cycle Before you make any change, you must pause the machine by pressing the ST AR T/P AUSE button. It is possible to change any phase before the programme carries it out. Changing the type of fabric or temperature is possible, obviously , only during the washing phase. When you make a change in these [...]

14 DR YING 2.5 KG OF COTTON Y ou have for example just machine-washed and spun at 1200 rpm 5 kg (1 1 lb) of laundry . They are cotton fabrics of medium weight which you want to iron as soon as they are dry . Press the SKIP/RESET button repeatedly to erase the programme that has just been carried out, will show in the display and switch the machine [...]

15 W ashing and Drying Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand [...]

16 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR[...]

17 W ash Care Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING [...]

18 W ashing programmes The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the a[...]

19 Drying Pr ogrammes (*) The STORE DR Y drying programme for cotton is the reference programme for the Ener gy Label data, in compliance with EC directive 92/75. The machine is capable of washing 6 kg, however , to achieve optimum wash results it is recommended thet the above wash load are adhered to. Timed drying Degree of drying Store dry (*) Su[...]

20 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po[...]

21 The dangers of fr eezing If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● T urn off the water tap. ● Unscrew the inlet hose. ● Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. Run the draining programme. T o do this: ● Switch t[...]

22 Something Not W orking Certain problems ar e due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centr e, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused b[...]

23 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door . ● The machine is heating the water or drying the clothes. ● The drum is turning. The door can only be opened when the relevant light has gone out. Spinning starts late or the machine does not spin ● The electronic unbalance detection d[...]

24 Guarantee Conditions Standar d guar antee conditions W e, Zanussi undertake that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour , materials or [...]

25 To contact your local Ser vice Force Centre telephone 08705 929 929 132999022 WJS1265-1465-1665W.qxd 9/13/01 11:15 AM Pagina 25 (Nero/Process Black pellicola)[...]

26 To contact your local Ser vice Force Centre telephone 08705 929 929 132999022 WJS1265-1465-1665W.qxd 9/13/01 11:15 AM Pagina 26 (Nero/Process Black pellicola)[...]

27 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

28 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Remove the polystyrene b[...]

29 If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (161/2 ft) between the appliance’ s inlet and the bottom of the water storage tank. Set the hose correctly by loosening the ring nut. After position[...]

30 Le v elling Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally). Any necessary adjustment can be made with a spanner . Accurate levelling prevents vibration, noise and displacement of the machine during opera[...]

31 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same[...]

© Electrolux Household Appliances Limited 2000 From the Electr olux Group. The world’ s No . 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saw[...]