Zanussi ZT 1012 manuel d'utilisation

INSTRUCTION BOOKLET W ASHING MACHINE ZT 1012 AQUACYCLE ZT PROGRAMMES 1012 TEMPERATURES ON-OFF QUICK WASH 132985620 GB Quick Installation Guide: visit our WEB SITE to view an install video www .video.uk.electr olux.com[...]

2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst[...]

3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 Child safety feature 6 The Control Panel 6 Operating sequence 7-10 W ashing 5 kg of white cotton at 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the temp[...]

4 Y our New W ashing Machine Y our new washing machine meets all modern requirements for ef fective tr eatment of laundry with low water , energy and detergent consumption. ● Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing. ● The special w[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 ON/OFF button 5 “Quick W ash” button 6 T emperature selector dial 7 Programme selector dial 8 Door opening handle 9 Filter 10 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener The programme chart is in the interi[...]

1 Deter gent dispenser dr a w er The programme chart is in the interior part of the drawer . 2 Mains-on light This light illuminates when the machine starts working and goes out when the ON/OFF button is released. 3 ON-OFF button By depressing this button the machine starts operating. When depressed again, the machine stops. The push button is prov[...]

7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 5 KG OF WHITE COTTON A T 95°C Suppose you have 5 kg of normally soile[...]

8 6. Select the r equir ed pr o gr amme T urn the dial clockwise to the programme B or A (if you wish to perform a prewash). 7. Star t the machine Before starting up the machine check that: ● the appliance is plugged in ● the water supply tap is turned on ● the drain hose is correctly and securely positioned ● the door and the detergent dis[...]

9 W ASHING 2 KG OF MIXED F ABRICS A T 50°C Suppose you have 2 kg of Mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door .[...]

10 Depress the ON/OFF button : the mains-on light will illuminate and the machine starts operating. 8. At the end of the pr o gr amme The machine stops automatically . The water of the last rinse will remain in the tub. If you have selected a programme which ends with the water of the last rinse left in the tub (programmes G, H , K, L, M, N ), drai[...]

11 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2[...]

12 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR[...]

13 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING[...]

14 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme/ W ashing symbol Programme dial position Possible options Max. load NON- F AST COLOUREDS F AST COLOUREDS WHITES WHITES WITH PREW ASH For heavy soiled cotton items. Fast coloured cotton or linen fabrics, shirts, underwear , towels. Non fast coloured cotton or line[...]

15 15 HAND RINSES Separate rinse cycle for handwashed synthetic items M 3 rinses with fabric softener , if required W ater left in tub 2 kg W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme/ W ashing symbol Programme dial position SYNTHETICS Possible options SHOR T SPIN WOOL DELICA TES Synthetic or mixed fabrics, u[...]

16 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po[...]

17 Unscrew and remove the filter . Clean carefully under a fast running tap. Wa r n i n g When the appliance is in use and depending on the programme selected there can be hot water in the filter . Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty . When replacing the filter , ensure i[...]

18 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused by [...]

19 Symptom The door will not open Possible causes ● The programme is still running. ● The door lock has not yet released. ● W ater in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly di[...]

20 Guarantee Conditions Standar d guar antee conditions W e, Zanussi undertake that if, within 24 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour , materials or [...]

21 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

22 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Remove the polystyrene b[...]

23 Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe. When discharging into a standpipe ensure that the top of the standpipe is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level.[...]

24 Any necessary adjustment can be made with a spanner . Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor . Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder . If possible, always place the [...]

25 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same[...]

26 a) Door The dimensions of the door should be: - width 595-598 mm - thickness 16-22 mm The height (C-Fig. C) depends on the height of the adjacent furniture's base. b) Hinges T o mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5-14 mm depending on the depth of door furniture) on the inner side of the door . The dist[...]

27 If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described Recommendations r egar ding the construction and fitting of a base when the installa tion r equir es an integr ated appliance to be r aised[...]

From the Electrolux Group. The world’s No. 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of[...]