Zanussi ZWF 1434W manuel d'utilisation

W ASHING MACHINE ZWF 1434W 1400 1200 900 700 Delicates 60°C 50°C 95°C 40°C Extra Quick Prewash Prewash Wash Rinses Spin Drain 30°C Wool On/Off Cottons Synthetics Outdoor Sports Super Rinse Delay 40° AA Skip Handwash Start/ Pause Rinse Hold Reset Temp. Spin ZWF 1434 W JETSYSTEM 5 kg 1400 INSTRUCTION BOOKLET 132988230 GB 132988230.qxd 12/07/200[...]

2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst[...]

3 Contents F or the User Important Safety Information 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 Child safety feature 5 The Control Panel 6-9 T urning the acoustic signal off 6 Operating Sequence 10-12 Load the laundry 10 Measure out the detergent 10 Measure out the fabric softener 10 Switch the machi[...]

4 Y our New W ashing Machine Y our new washing machine, which is fitted with the New Jet System, meets all modern requirements for effective treatment of laundry with low water , ener gy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and typ[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Drain pump 6 Adjustable feet Door lock ed pilot light It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened. Deter gent dispenser dr a w er Prewash Main wash Fab[...]

1 “On/Off ” button Press this button to switch the washing machine on. The display (8) will show three flashing dashes or a flashing zero. Y ou will find more detailed explanations on pages 7-8 (see “DISPLA Y”). Press the On/Off button again to switch the machine off. 2 MAINS-ON light This light is connected to the “On/Off” button. It l[...]

7 Important! If you accidentally press the “Skip Reset” button more than once, the display will show three flashing dashes. T o drain the water , select any washing programme by means of the F ABRICS button, then press “Skip Reset” three times in order to select the drain (only the “drain” light will remain lit). 6 W ASH CHOICE button P[...]

8 • Delay start , a time value indicated in hours and selected by means of the relevant button. The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown begins, and the delay time value decreases by one unit every hour . Y ou can delay the start [...]

9 T o select rinses & spin , the programme must be paused, now press the Skip button once, the wash LED goes out. T o select spin only , the programme must be paused, now press the Skip button twice. The wash & rinses LED,s go out. T o select Drain the programme must be paused, now press the Skip button three times, the wash - rinses - spin[...]

10 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 5 KG OF WHITE COTTON A T 95°C Suppose you have 5 kg of heavy soiled [...]

11 The relevant light will light up. 7. Select the spin speed or the Rinse Hold option Press the “Spin” button repeatedly , in order to select the desired spin speed or the Rinse Hold option. The relevant light will light up. If you select the Rinse Hold option, the machine will stop at the end of the programme with the water still in the tub. [...]

12 11. Star t the pr ogr amme Press the Start/Pause button. The relevant light will stop flashing and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay . 12. Ho w to chan[...]

13 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2[...]

14 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR[...]

15 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING[...]

16 W ashing pr ogrammes The “cottons programme” at 60°C + 40°AA is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the[...]

17 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po[...]

18 • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover . • Remove any objects from the pump impeller by rotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump cover fully in. • Clos[...]

19 Something Not W orking Certain problems ar e due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centr e, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused b[...]

20 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door . ● The machine is heating the water . ● The drum is turning. The door can be opened only when the door locked light has gone off. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in b[...]

21 21 Guarantee Conditions Standar d guar antee conditions W e, Zanussi Electrolux, undertake that if, within 12 months of the date of the purchase, this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF ANY CHARGE f[...]

22 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

23 23 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses [...]

24 W a ter inlet Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance to connect to the water supply . Installation should comply with local water authority and building regulations’ requirements. The appliance must be connected to a cold water supply . A minimum water pressure of 50 kPa (0.5 bar) is req[...]

25 Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washing machine. The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joi[...]

26 26 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the s[...]

© Electrolux plc 2004 From the Electr olux Group. The world’ s No. 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sol[...]