3M ET 350 manuale d’uso

ET 350 Monitor User ’ s Installation Guide[...]

ET 350 Monitor User’s Installation Guide Read and underst and all safety information before inst alling and using this product.[...]

Copyright This manual is © 3M 2002. All rights reserved. Reproduction of the contents of this copyr ighted manual in whole or in part, by any means, electronic or m echanical, for any purpose, without written permission of 3M Touch Sy stems, a subsidiary o f 3M, is prohibit ed. Notice Given the variety of factors that can aff ect the use and perfo[...]

i Product safety information Intended Use The 3M Dynapro TM ET 350 monitor (specifically , monitor models ET 350R, ET 350L2, and ET 350L3) is inte nded to provide touch screen functions when connected to a ho st computer i n an industrial setting . The ET 350 monitor is no t intended for use in hazardous locations. Warning To reduce the risk of fir[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide ii Warning (contin ued) To reduce the risk of electr ic shock which could result in serious personal injury or death:  Do not open the power supply in the ET 350 monitor. It contains hazardous voltages. The power supply has no use r-serviceable pa rts or adjustments inside .  Make sure th[...]

iii Product safety information Explanation of safety labels The following safety symbols are used on the exterior and interior of the ET 350 monitor: Symbol Meaning Attention: Refer to ac companying documents Caution: Risk of electric shock[...]

[...]

v Renseignement s sur la sécurité du produit Utilisation Le moniteur 3M Dynapro TM ET 350 (modèles ET 35 0R, ET 350L2 et ET 350L3) sert à fournir des fonctions pour écran tact ile lorsqu’il est branché à un ordinateur hôte dans un environne ment industriel. Le moniteur ET 350 n’est pas destiné à être utilisé dans des endroits danger[...]

Guide d’inst allation pour ut ilisateur d u moniteur ET 350 3M Dynapro vi Avertissement (suite ) Afin de réduire le risq ue d’électrocution qu i peuvent cause r des blessures corporelles sérieuses ou mortelles :  N’ouvrez pas l’alimentation é lectrique du moniteur ET 350. Il contien t des voltages dangereux. L’alimentation élec tr[...]

vii Renseignements au sujet de la sécurité du produit Signification des étiquettes de sécurité Les symboles de sécurité suivants sont utilisés à l’ intérieur et l’extérieur du moniteur ET 350: Symbole Signification Attention : référez-vous aux documents d’accompagne ment Mise en garde : risque d ’électrocution[...]

[...]

ix Informatie productveiligheid Voorgenomen gebruik De 3M Dynapro TM ET 350 monitor (me t name de modellen ET 350R, ET 350L2 , en ET 350L3) dient als aanraakbee ldscherm wanneer deze i s aangesloten op een hostcomputer i n een industriële omgeving. De ET 350 monitor is niet bedo eld voor gebruik in gevaarlijke omgevingen. Waarschuwing Om het gevaa[...]

3M Dynapro ET 350 Monitor Gebruiker shandleiding voo r Installatie x Waarschuwing (vervolg) Om het gevaar van ernst ig of dodelij k persoonlijk let sel als gevolg van elektrische schok ken te beperken:  Maak de vermogensvoeding van de ET 350 monitor niet open. Deze bevat een gevaarlijk volta ge. De vermogensvoedin g bevat geen onde rdelen die aa[...]

xi Informatie productvei ligheid V erklaringen van de veiligheidslabels Onderstaande veiligheidssy mbolen worden gebruikt aan de buiten- en binnenkant van d e ET 350 monitor: Symbool Betek enis Pas op: Raad pleeg de bijgeleverde documenten W aarschuwing: Gevaar op ele ktrische sc hokken[...]

[...]

xiii Produkt sicherheit shinweise Einsatzbereiche Der Monitor 3M Dynapro TM ET 350 (insbesondere die Monitormod elle ET 350R, ET 350L2, und ET 350L3) bietet i m Anschluss an einen Hauptrechner Kontaktbildschirmfunktionen für industr ielle Anwendungsgebi ete. Der Monitor ET 350 ist nich t für den Einsatz in Gefahrenzonen gedacht. Warnhinweise Maß[...]

Monitor 3M Dynapro ET 350 Montagean leitung xiv Warnhinweise (Forts.) Maßnahmen zum Schutz vor elektrisc hem Schlag, der zu schwerer Körperverletzung oder Tod führen kann:  Die Netzteil des Mon itors ET 350 ni cht öffnen, da es unter gefährlicher Spannung steht. Das Netzteil enthält keine Tei le oder Einstellungs- möglichkeiten, die von B[...]

xv Produkts icherheitsh inweise Erklärung der Sicherheit s- etiketten Die folgenden Sicherheitss ymbole sind auf der Außen- u nd Innenseite des Monitors ET 350 angebracht: Symbol Bedeutung W arnung: Bitte beiliegende Doku mentation beachten Vo r s i c h t : Elektrische Schlaggefahr[...]

[...]

xvii Informazioni per la sicurezza Applicazioni d’im piego del prodotto Il monitor 3M Dynapro TM ET 350, in particolare i modelli ET 350R, ET 350L2 e ET 350L3, è destinato all'uso come mon itor a schermo tattile in collegamento a un computer host in ambiente i ndu striale. Il monitor ET 350 non è progettato per l’utilizzo in ambien ti pe[...]

Guida per l’installazione del Mon itor 3M Dynapro ET 350 xviii Avvertenza (segue...) Precauzioni per ridurre il risch io di scosse elettrich e che potrebbero causare les ioni gravi o fa tali:  Non aprire l'alimentatore del monitor ET 350. Esso contiene pa rti sotto tensione elevata. L'alim entatore non co ntiene parti che richiedono [...]

xix Informazioni per la sicurezza Illustrazione del significato dei simboli per la sicurezza I seguenti simboli per la sicurezza veng ono utilizzati nelle parti esterne ed interne del monitor ET 350: Simbolo Significato Attenzione: Consult are la documentazione di accompagna mento Attenzione: Rischio di scossa elettrica[...]

[...]

xxi Información de seguridad del producto Uso deseado El monitor 3M Dynapro TM ET 350 (en p articular , los modelos ET 350R, ET 350L2, y ET 350L3) está diseñado para proveer funciones de pantalla táctil cuando se lo conecte a una comp utadora central en un ambiente industria l. El monitor ET 350 no fue pensado para operar en ubicaciones peligro[...]

Monitor 3M Dynapro ET 350 - Gu ía de Instalación de l Usuario xxii Advertencia (continuac ión) Para reducir el riesgo de choqu e eléctrico que podría resu ltar en lesiones perso nales severas o muerte:  No abra la fuente de alimentación del monitor ET 35 0. Contiene tensiones peligrosas . La fuente de alimentación no cuenta en su interior[...]

xxiii Información de seg uridad del pr oducto Explicación de los rótulos de seguridad Los siguientes ssímbolos de seguiridad se utilizan en el interior y el exterior del monitor ET 350: Símbolo Significado Atención: Refiérase a la documentación ad junta. Precaución: Peligro de choq ue eléctrico.[...]

[...]

xxv         3M Dynapro TM ET 350   ET350R ET 350L2  ET350L3    ET350  !"#     [...]

3M Dynapro ET 350  xxvi            [...]

xxvii 5BCDEF     ET 350  GH GH GH GH IJ IJ IJ IJ KL KL KL KL MNOPQRS TU TU TU TU [...]

[...]

xxix Content s Before you start About the User’s Installa tion Guide .............. ............ ....... 1 Topics .................... .................. .................. ...................... ................... ....... 1 Warnings and cautions ....................................... .................. .................. ... 1 Related document[...]

[...]

xxxi List of Figures Figure 1: 3M Dynapro ET 350 monitor ............................... .................... 6 Figure 2: NEMA 4X panel gasket (comes with ET 350R) ...................... 8 Figure 3: NEMA 4X hatch and extended co ver (comes with ET 350L3) 9 Figure 4: Moisture Deflector option.............. ....................... .................. [...]

[...]

1 BEFORE YOU START About the User ’ s Inst allation Guide T opics This manual is written for system inte grators and day-to-day users of the 3M Dynapro TM ET 350 monitor. The manu al covers the following topics:  Installing communica tion and power cables  Installing the touch screen software  Adjusting display settings  Mounting the [...]

2 3M Dynapro ET 350 Monitor User’s Installati on Guide Software guides The ET 350 monitor User’s Installation Guide explains how to install touch screen software that will run with operating systems supported by the ET 350 (see Chapte r 2). For information on how to customize the software, refer to one of the following manuals. Both of these so[...]

Before you start: About the User ’s Installation Guide 3 Product support Registration Register your 3M Dynapro ET 350 m onitor by mailing the postage-paid Product Registration Card. It detaches from the Warranty Card that came with your unit. The Product Re gistration Card may also be faxe d to 3M Touch Systems (604-521-46 29). Returning products[...]

[...]

5 CHAPTER 1 Introducing the ET 350 monitor About the chapter This chapter provides th e following information:  Basic and model-specific packi ng lists for the ET 350 monitor  Standard features of the ET 350 monitor  Distinctive features of each ET 350 monitor model  Options for the ET 35 0 monitor Packing list s The basics The ET 350 m[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 6 ET 350L3 monitor (hatch)  NEMA 4X hatch and extended hatch cover  NEMA 4X hatch gasket  Cable fitting components  Screws  Clear, flexible insulator  Instructions for installing the NEMA 4X hatch The packing list for th e KVM extender option appears on page 10. St andard feat[...]

Chapter 1: Introd ucing the ET 350 monitor 7 The touch screen consists of the display area and the TouchSurround (Figure 1). Touches in the display ar ea emulate the movements and actions of a mouse, and you can use your finger lik e a pointer. The TouchSurround can emulate keys on a keyboard. The MicroTouch NFI touch sc reen provides highly accura[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 8 Distinctive features of each model All ET 350 monitor units have the s tandard features des cribed above. The distinctive features of each model are describe d below and summarized in Table A. ET 350R monitor (NEMA 4X panel gasket) The ET 350R mon itor has a UL Reco gnized comp onent mark. It[...]

Chapter 1: Introd ucing the ET 350 monitor 9 Figure 3: NEMA 4X hatch and extended cover (comes with ET 350L3) T able A: Summary of fe atures of each ET 350 model Model Distinctive features ET 350R This model comes with: • Panel gasket • Screws and washers • Power ca ble • Installation instructions Note : On-site inspecti on is required to v[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 10 Options There are three types of options that may be ordered for the ET 350 monitor (not including mounting options, which are d iscussed on page 11 ):  Keyboard, video, and mouse (KVM) extender (single or dual) option  Fixed field wiring  The 3M Dynapro Moist ure Deflector Table B [...]

Chapter 1: Introd ucing the ET 350 monitor 11 Moisture Deflector The Moisture Deflector is a durable plastic component that surrounds the touch screen display of the monitor an d offers protectio n to the monitor from moisture that might collect on the unit. The Moisture Deflector option can be supplied only when ordering an ET 350 monitor. It cann[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 12 Table C summarizes the mounting possibilities for each of the ET 350 monitor models. For more information about th e mounting kits, see “Step 8: Mount monitor” on page 28. T able C: Mounting possibilities for ET 350 monitor models Monitor Model NEMA hatch NEMA panel Desktop stand Rack mo[...]

13 CHAPTER 2 Inst alling the monitor About the chapter This chapter provides pre-installatio n recommendations and step-by-step instructions for installing the ET 350 monitor. Inst allation summary These steps outline a typical installatio n procedure for the ET 350 monitor. While most installations will follow these steps, your specific installati[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 14 Before inst alling Before beginning to install the ET 35 0 monitor, consi der the following recommendations:  Get the latest video driv er for your ho st computer’s vi deo adapter card. To find out if your driver is the most current one, check the web site of the video adapter’s manu [...]

Chapter 2: Instal ling the monitor 15 To connect the video signal cable, follow these steps: 1. If the monitor has a hatch , the hatch must be open to access connectors. Remove th e four #6-32 Phillips screws affixing the hatch to the monitor and open the hatch cover. For an illustration of the locations of these screws, refer to Figure 13 on page [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 16 3. Connect the other end of the serial cable to the serial port on the computer . 4. T ighten the screws of the serial cable to ensure proper connection. Step 3: Connect to power supply The ET 350 monitor can be connected to an AC power supply in two ways: with a stan dard AC powe r cabl e o[...]

Chapter 2: Instal ling the monitor 17 To connect the AC power cable: 1. If the monitor has a hatch , make sure that the hatch is open (it should have been o pened when connecting the video cable). The hatch must be open to access connectors. 2. Connect the power cable to the so cket on the side of the monitor . 3. Connect the other end of the cable[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 18 Figure 6: Connecting AC power cable wires to connectors 5. Using a 1/8-inch flathead screwdriver, turn the terminal block’ s screw clockwise until the neutral cable wire is firmly attached to the ET 350 monitor . 6. Repeat (3) and (4) for the ground an d line cable wires. 7. T ighten the s[...]

Chapter 2: Instal ling the monitor 19 Step 4: Adjust display settings Open the enclosure To access the monitor’s controls, you mu st open it. To open the enclosure: 1. Put on an electrostatic discharge grounding wrist strap. 2. Make sure that the power supply for the monitor is connected. Figure 8: Op ening moni tor enclosure with Allen k ey 3. O[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 20 Auto display setup Run the auto display setup before ma nually adjusting individual display settings. Auto display setup sets pre- programmed optimal display settings. 1. Press 1 once. The display control men u appears on the screen and the PC icon at the top of the on-screen display is sele[...]

Chapter 2: Instal ling the monitor 21 Figure 10: Auto d isplay setup 3. Press 1 once. The display settings are automatically optimized. Manually adjusting display settings If the auto display setup settings are no t suitable for your application, you can make manual adjustments to th e display settings. Follow these st eps: 1. Press 1 once. The con[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 22 Other on-screen display options The most commonly used on-screen di splay options are those tha t appear under the PC and Auto ico ns. Other on-screen options th at can be set using the controls are summari zed below. OSD (on screen display) menu The settings in the OSD menu permit you to ch[...]

Chapter 2: Instal ling the monitor 23 3. Follow the screen prompts to install the driver and then follow the on- screen instructions of the Setup W izard. Note : When the Baseline dialog box appears, select Skip. When the Linearization Data Download di alog box appears, select Skip. Baseline and linearization data ar e built into the monitor at the[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 24 f. Click Y e s in reply to the question: Are you sure you want to use this driver? The Update Device Driver W iz ard appears. g. Insert your CD-ROM for the W indows 98 operating system. (If the CD-ROM welcome page appears, close it so you can see the W izard dialog box.) h. Click Next in the[...]

Chapter 2: Instal ling the monitor 25 To import the standard TouchSu rround definition for W indows NT 4.0 and Windows 9X operating systems, follow these steps: 1. Select the W indows Start button, select Programs, and then select Command Prompt. 2. At the command prompt, type  CDTOUCHNT for Windows NT  CDTOUCHW9X for Windows 9X 3. T ype [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 26 If the ET 350 monitor is ru nning an application or is in a setting in which unintentionally activating a button on the touch screen mi ght have harmful consequences for pe ople or equipm ent, 3M Touch Systems recommends creating a “safe touch” setting. The procedure for applying a safe [...]

Chapter 2: Instal ling the monitor 27 6. Select OK. 7. Make sure that the display’ s pow er management system (DPMS), which is configurable from the disp lay’ s on-screen menu options, is turned on . For details on how to check DPMS, see “Utility menu” on page 22. Safe touch for Windows 9X operating system To apply a safe touch setting with[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 28 Step 7: Close enclosure and hatch Close enclosure When you are finished adjusting the display settings, close the enclosure: 1. Close the bezel assembly and lock th e latch screw with the Allen key . 2. If applicable, replace the four security screws. Ti ghten the screws to a torque of 10 in[...]

Chapter 2: Instal ling the monitor 29 The locations for attaching the security screws are shown in Figure 13 on page 38 . Mounting the ET 350 monitor with Moisture Deflector The ET 350 monitor with Moisture Deflector comes with four sealing screws fastened to the back of the unit. 3M Touch Systems recommen ds that if you need to remove the sealing [...]

[...]

31 CHAPTER 3 Maint aining the monitor About the chapter This chapter describes how to:  Clean the touch screen and enclosure  Replace backlights  Replace the fuse  Check gaskets for damage o r improper functioning  Maintain the ET 35 0 monitor with Moisture Deflector Cleaning Cleaning the touch screen When cleaning the front surface [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 32 Cleaning the enclosure Use a 50 percent solution of alcohol (eth anol or isoprop anol) in water on a cotton gauze pad or soft co tton cloth to clean the enclosure. Be sure to apply the alcohol solution to the cloth only, not directly to the enclosure. Replacing backlight s For information on[...]

Chapter 3: Maintaining the monitor 33 5. While gently pressing the fuse holder , turn the screwdriver counterclockwise . The fuse holder will pop out of the ET 350 monitor . 6. Remove the fuse hol der with the fuse. 7. Detach the fuse from the fuse holder by pulling on it gently . Figure 12: Removin g fuse from fuse holder 8. Replace the fuse. For [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 34 Maint aining the ET 350 monitor with Moisture Deflector The Moisture Deflector is made of durable plastic and , like other 3M Dynapro compon ents, is designed to function in rugged condi tions. It is not indestructible, however. Fo llow these guidelines to extend its life and help ensure opt[...]

35 CHAPTER 4 T ouchSurround and graphic underlay About the chapter This chapter describes:  The function of th e TouchSurround an d graphic underlay  How to get a custom underlay  How to replace the underlay About the T ouchSurround The TouchSurround is the touch-sensitive area of the comput er screen around the LCD display (see Figure 1 o[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 36 Creating your own graphic underlay If you need a custom graphic underlay, it is recommended th at you order it from 3M Touch Systems, especially if the underlay will need to withstand temperature and humidity extremes. The monitor is designed to operate in temperatures from 32°F to 122°F ([...]

Chapter 4: TouchSurro und and graphic un derlay 37 Replacing a T ouchSurround graphic underlay What you will need The rest of this chapter describes how to re move the graphic underlay that came with your monitor and replace it with a new, custom underlay. To do the tasks describe d in this section, you will need:  A clean, ESD-protected envi ro[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 38 3. Put on an ESD grounding wrist st rap if one is available. If a grounding wrist strap is not availabl e, touch a grounded metal object to discharge any static char ge from your body . 4. Open the enclosure.  If your unit has security screws on the back of the bezel, remove them with a s[...]

Chapter 4: TouchSurro und and graphic un derlay 39 6. Carefully disconnect the touch screen tail connector from the controller board (Figure 14). a. Gently pull out the touch screen connector ’ s retaining clip with two fingers. b. Gently pull the touch screen tail from the contro ller and through the ferrite block. Figure 14: D isconnecting to u[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 40 7. Using a 5/16-inch torque hex n ut drive, remove the four displa y panel nuts and washers (Figure 15). Figure 15: Remov ing display p anel nut s and washers[...]

Chapter 4: TouchSurro und and graphic un derlay 41 8. Carefully slide the display pan away from the threaded studs and lift it to a vertical position, taking care not to damage the cables connected to the components on the display pan (Fig ure 16): a. Lift the hinge side of the displa y pan up from the threaded studs. b. Slide the display pan away [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 42 10. Remove th e underlay in stages. Th e underlay is lar g er than the opening in the sheet metal reta ining frame. Y ou can bend the underlay , but do not tear or crease it. T o loosen the underlay from the glas s surface, use a finger and pus h a corner of the underlay towards the cen ter [...]

Chapter 4: TouchSurro und and graphic un derlay 43 12. Being careful not to damage the new underlay , place it under the retaining frame in stages: slide one corner in place under the retaining frame, then bend the underlay and s lide in the next corner . Continue until the underlay is in place against the surface of the glass (Figure 18). Figure 1[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 44 14. Gently reconnect the touch screen ta il to the controller (F igure 19): a. Pull out the touch screen co nnector ’ s retaining clip. b. Slide the touch screen tail through ferrite and insert it into the connector . c. Press the retaining clip b ack into the controller . Figure 19: Recon[...]

45 CHAPTER 5 T roubleshooting About the chapter This chapter outlines problems that may occur when using the 3M Dynapro ET 350 monitor and sugges ts solution strategies. If problems persist after following the applicable in structions in this chapter, contact 3M Touch Systems technical support (see page 3). General problems Problem S olution Video [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 46 ET 350 monito r does not power up when plugged in. T ry the following: 1. Make sure that the power to the monitor ’s power cable is turned on. 2. Make sure that the power to the host computer’s power supply is turned on. 3. Check that the power cord is properly connected at bo th ends. 4[...]

Chapter 5: Troublesho oting 47 T ouch screen driver error messages The touch screen drivers can detect error conditions that are independent of the operating system. If you see on e of the following error messages, please note the number displayed with it. This will help 3M Touch Systems technical support staff to diagnose the problem (see page 3).[...]

[...]

49 APPENDIX A S pecifications Enclosure and cutout dimensions Figure 20: En closure dim ensions Imperial Metric Enclosure 14.00" high × 16.30" wide × 6.32" deep 355.60 mm high × 414.02 mm wide × 160.53 mm deep Panel cutout 12.33" high × 14.36" wide 313.18 mm high × 364.74 mm wide Mounting clearances Rear 1" Rear [...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 50 Figure 21: Cuto ut dimensions 30023 a 6.685" (169.80 mm)[...]

Appendix A: Specifica tions 51 Display specifications Display modes Chemical resist ance The bezel provides resist ance to user abuse and to most chemicals and other substances. Contact 3M Touc h Syste ms technical support for guidelines on protecting the e quipment from specific chemicals. Supported operating systems  Windows XP Professional op[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 52 Communications Fuses AC power supply Port/ connector Description Stan da r d monitor Serial  Touch screen interfac e to host computer  RS-232C compatible asynchronous serial port  9-pin fema le D-conne ctor VGA  Video interface to host  VGA signal cable port  15-pin female [...]

Appendix A: Specifica tions 53 Operating conditions Non-operating conditions Safety st andards Dust and moisture resist ance Condition Range Operating temperature 0°C to 50°C (32°F to 122°F) Humidity 50°C, 5% to 95% non-condensing Maximum operating altitude 6,560 feet (2,000 meters) Vib r at i on 5 to 57 Hz 0.0 06 in peak displacement 58 to 20[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 54 FCC compliance This equipment has been tested and fo und to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection agai nst harmful interference when the equipment is operated in a commercial env[...]

Appendix A: Specifica tions 55 Electromagnetic emission st andards Product certifications System sof tware EN55022 Class A ICES-003 Class A FCC CFR 47, Part 15, Subpart B, Class A C-T ick — Australia, New Zealand UL Information T echnology Equipment — United S tates  ET 350R monitor (with p anel gasket)  UL recognized component for Pollut[...]

[...]

57 APPENDIX B Inst alling monitor with KVM extender About this appendix This appendix provides in structions for installing the ET 350 monitor with the keyboard, video, and mouse (KVM) extender option. For more information about the KVM extender, re fer to the manufacturer’s manual that came with your ET 350 monitor. The KVM extender option allow[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 58 These jumpers (JP3, JP4, and JP5) can be set to adjust equalization of the monitor’s display to compen sate for loss of image qu ality due to the signal passing through a l ong cable. To set the cable-length jumpers: 1. Put on an ESD grounding wrist strap. 2. Disconnect power from the ET 3[...]

Appendix B: Installin g monitor with KVM extende r 59 If the length of cable between the lo cal and remote units is near the high end of one of the ranges and you are using high-resolutio n video (1024 x 768), try setting jumpers for the next higher cable length. This might help impr ove video compensat ion. 5. T o fine-tune the display image after[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 60 6. Remove the bracket, find the DIP-Switc h on the board, and move the switch to the on position. 7. Replace the bracket and screw s and close the enclosure. Step 2: Make connections To connect commun ications cables, follow these steps: 1. If the monitor has a hatch , the hatch must be open[...]

Appendix B: Installin g monitor with KVM extende r 61 Figure 23: Connectors: ET 3 50 monitor with KVM extender Remaining step s Continue the installation steps in Ch apter 2, beginning with Step 3 o n page 16:  “Step 3: Connect to power supply  “Step 4: Adjust display settings  “Step 5: Install software and i mport TouchSurround file[...]

[...]

63 APPENDIX C Connector pin-out s V ideo signal cable connector Pin Signal 1 Red video 2 Green video 3 Blue video 4N . C . * 5 V ertical sync. return 6 Red return 7 Green return 8 Blue return 9N . C . * 10 Horizontal sync. return 11 N . C . * 12 N.C.* 13 Horizontal sync. 14 V ertical sync. 15 N.C.* Important : T o reduce the risk of voiding FCC and[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 64 Serial port RS-232C connector Pin Signal Description In/Out 1 DCD N .C.* 2 RXD R eceive Data OU T 3 TXD T ransmit Data IN 4D T R D a t a T e r m i n a l Ready IN 5 SGND Signal Ground --- 6D S R N . C . * 7R T S N . C . * 8C T S N . C . * 9R I N . C . * Important : T o reduce the risk of void[...]

Appendix C: Conn ector pin-o uts 65 CA T 5 interconnecting cable (for KVM extender) Pin Color Function, p air 1* White/Orange T X, Pair 2 2 Orange/White RX, Pair 2 3 White/Green TX, Pair 3 4 Blue/White R X, Pair 1 5 White/Blue TX, Pair 1 6 Green/White RX, Pair 3 7 White/Brown TX, Pair 4 8* Brown/White RX, Pa ir 4 *Looking into the interconnect sock[...]

3M Dynapro ET 350 Monitor User’s Installati on Guide 66 Keyboard and mouse (for KVM extender) Pin Signal 1D a t a 2 N.C.* 3G N D 4+ 5 V 5C l o c k 6 N.C.* Important : T o reduce the risk of voiding FCC an d CE compliance and redu cing the performance of the ET 350 monitor , when makin g your own cable, reduce the sensitivity of the ET 350 monitor[...]

67 Index A AC power supply fixed field wiring  17 specifications  52 standard wiring  16 ACPI defined  2 B Backlights  7 replacing  32 safe touch setting  25 setting saver  25 specifications  51 Bezel defined  2 resistance to ch emicals  51 Boom mount kit (option)  28 C Cable-length jumpers (KVM extender), settin[...]

68 E Electromagneti c compatibilit y immunity standards  54 Electromagneti c emission standards  55 Electrostatic discharge (ESD) and electromagnetic suscept ibility standards  54 Enclosure cleaning  32 closing  28 dimensions  49 opening  19 Error messages touch screen drivers  47 ET 350 monitor certifications  55 install[...]

69 M MicroTouch Near Fi eld Imaging (NFI) touch screen, defined  2 , 6 Moisture Deflector cleaning & maint aining  34 mounting  29 Mounting boom mount option  28 desktop stand option  28 rack mount option  28 N Near Field Im aging (NFI). se e MicroTouch Near Fi eld Imaging Non-operating conditions  53 O On-screen display se[...]

70 T 3M Touch Systems customer support  3 returns policy  3 trademarks  ii Touch screen cleaning  31 defined  2 TouchSurround defined  2 , 35 importing definition files  24 replacing underlay  37 – 44 TouchSurround. see also Graphic underlay  36 Trademarks  ii Troubleshooting  45 – 47 V Video cable connecting ?[...]

For mor e information on 3M touch products, visit 3Mtouch.com or call toll-fr ee 1-800-667-0374 3M T ouch Systems 3M Optical Systems Division 800 Carleton Court Annacis Island New W estminster , B.C. Canada V3M 6L3 www .3Mtouch.com W orldwide Manufacturing Plants: Austin, T exas Methuen, Massachusetts Milwaukee, W isconsin V ancouver , BC Canada Ab[...]