A&D UA-767NFC manuale d’uso

Digital Blood Pressure Monitor Model UA-767NFC Instruction Manual 1WMPD4002380[...]

1 Contents Dear Customers .................................................................... 2 Preliminary Remarks ............................................................. 2 Precautions ........................................................................... 2 Parts Identification ..........................................................[...]

2 Dear Customers Congratulations on purchasing a state-of-the-art A&D blood pressure monitor, one of the most advanced monitors available today. Designed for ease of use and accuracy, this m onitor will facilitat e your daily blood pressure regimen. We recommend that you read thro ugh this manual carefully before using the device for the first [...]

3 Part s Identification Battery Compartment Arm Cuff DC Jack A ir Connector Plug Air Socket Pressure Bar Indicato r MEMORY Systolic Pressure Diastolic Pressure Pulse Rate Battery Indicator Heart Mark 1.5V Batteries (R6P, LR6 or AA) Clock Display Clock Button I.H.B. Symbol (Irregular heartbeat symbol) START Button Proper Fit Ran g e Index Mark A rte[...]

4 Symbols Symbols that are printed on the device case Symbols Function / Meaning Recommended Action Standby and Turn the device on. S Y S. Systolic bl ood pressure in mmHg D I A. Diastolic blood pressure in mmHg P UL . / m i n . Pulse per minute Battery installation guide Direct current SN Serial number 2010 Date of manufacture Type BF: Device, cuf[...]

5 Symbols Symbols Function / Meaning Recommended Action Full Ba ttery The battery power indicator during measurement. Low Battery The battery is low when it blinks. Replace all batteries with new ones when the mark blinks. Unstable blood pressure due to movement during measurement. Take another measurement. Remain very still during measurement. The[...]

6 Operation Mode 1. Normal Measurement Press the START button. Blood pressure is measured and th e data is stored in memory. 2. Memory Function This monitor can store the last 100 measurem ents in memory. When the measurement e xceeds 100, the oldest da ta will be deleted automatically and th e most recent data will be stored. This monitor does not[...]

7 Using the Monitor Inst alling / Changing the Batteries 1. Slide the battery cover up to open it. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+ and -) are correct. Use only R6P, LR6 or AA batteries. 3. Slide the battery cover down to close. CAUTION Insert the batteri[...]

8 Press Press and hold Press and hold 12-hour cloc k 24-hour cloc k Using the Monitor Notes on the Built-in Clock The monitor displays the clock as long as power is connected. Adjust the clock prior to use. The current clock setting will be cl eared if the batteries are removed, or power is not connected for approximately 30 seconds while the AC ad[...]

9 P ress an d hold Year Month Day Hou r Minute 12-hour cloc k 24-hour cloc k Using the Monitor Adjusting the Clock 1. Press and hold the button until the year starts blinking. 2. Select the year using the button. Press the button to set the current year and move to m onth/day selection. The date can be set anywhere between the years 2011 and 2055. [...]

10 Using the Monitor Selecting the Correct Cuff Size Using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The index and proper fit range, on the cuf f, tell you if yo u are applying the correct cuff. (Refer[...]

11 Using the Monitor Symbols that are printed on the cuff Symbols Function/Meaning Recommended Action Artery Position Mark Set the mark on the artery of the upper arm or in line with the ring finger on the inside of the arm. ▲ Index REF Catalog number Proper fit range for Adult Cuff It's printed on the Adult Cuff. Range to use Large Adult Cu[...]

12 ST ART Measurement s Before measurement, read “Notes for Proper Measurement” on the next page. Normal Measurement 1. Place the cuff on the arm (preferably the left arm). Sit quietly during measurement. 2. Press the START button. The number of data stored in memory is displayed. Zero (0) is displayed blinking briefly. The display changes, as [...]

13 ST ART Measurement s Measurement with the Desired Systolic Pressure Model UA-767NFC is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. Use this method when re-inflation occurs repeatedly or when the results are not displayed even if the pressure decreases to 20 mmHg or less. 1. Place the cuff on t[...]

14 Near Field Communication (NFC) Function To transmit data to or from the blood pressure monitor, communication devices that comply with the communication specif ications of the blood pressure monitor are required. Examples of communication devices that comply NFC-enabled cellular phone Personal computer with NFC reader/writer Access Point Memory [...]

15 Caution on Using the NFC Function The UA-767NFC blood pressure monitor ha s a n N F C F o r u m T y p e 3 T a g wireless interface module built in. When the monitor is used near wireless communication devices which use the same frequency as that of the monitor (13.56 MHz) or use its harmonic frequencies, electromagnetic in terference may occur. [...]

16 About Blood Pressure What is Hypertension and How is it Controlled? Hypertension, an abnormally high arteri al blood pressure, if left unattended, can cause many health problems in cluding stroke and heart attack. Hypertension can be controlled by altering lifestyle, avoiding stress, and with medication under a doctor’s supervision. To prevent[...]

17 T roubleshooting Problem Possible Reason Recommended Action Batteries are drained. Replace all batteries with new ones. Nothing appears on the display, even when the power is turned on. Battery terminals are not in the correct position. Reinstall the batteries with negative and positive terminals matching those indicated on the battery compartme[...]

18 Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, contact the authorized d ealer in your area or our customer service department. T he A&D customer service will provide technical information, spare p[...]

A&D Company, Limited 1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LTD. Unit 24/26 Blacklands Way, Abingdon Business Park , Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550 420 Fax: [44] (1235) 550485 A&D Australasia Pty Ltd. 32 Dew Street,[...]