ACR Electronics Nauticast 2662 manuale d’uso

[...]

Y1 - 03 -0211 Rev D II Please read this first! Warning: Although ACR strives for accuracy in all its public ations; t his material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable f or any specific, indirect, incidental or consequential da mages as a resul t of its use. ACR components may [...]

Y1 - 03 -0211 Rev D III 1 S TARTING THE NAUTICA ST ................................................................................................................. 1 1.1 Initial Set Up of the NAUTICAST f or operation ............................................................................................... 1 1.2 Entering the MMSI / IMO / DAC [...]

Y1 - 03 -0211 Rev D IV History of Change s Date Version Rev. Status Comments Responsible 200 5-11-01 1.0 .0 A Released Initial Release A. Lesch 2006 -07-25 1.0.1 B Released Editorial w ork  2006 -11- 06 1.0.2 C Released Screen Display Updates  2008 - 12 - 05 1.0.5 D Relea[...]

Y1 - 03 -0211 Rev D 1 1 Starting the NA UTICA ST 1.1 Initial Set Up o f the NAU TICAST for operat ion NOTE: A UTHORIT IES MANDATE THAT YOU ENT ER THIS INFORM ATION. After install ing t he antennas and hardware the f ollow ing User, Voyage related and Ship Settings data needs to be entered. Upon Star t- up (Applying power) enter the f ollow ing info[...]

Y1 - 03 -0211 Rev D 2 1.2 Entering the MMS I / IMO / DA C / ESN Number s Select from the Main Menu “Serv ice Configuration” Number 6 . The default password from the factory is mentioned on your AIS display at the protection foil. (see Appendix 7.3 for password information). Enter Serv ice Passw ord and use the up and down arrows on keypad ?[...]

Y1 - 03 -0211 Rev D 3        No. 4 on the keyboard. Input new DAC / ESN Numbers and press [ Sav e] to st o [...]

Y1 - 03 -0211 Rev D 4 1.3 Entering Ship Sett ings             . The default password f rom the factory is m entioned on your AIS di[...]

Y1 - 03 -0211 Rev D 5 Setting the Interna l and Externa l GPS A ntenna Position. NOTE: It is critical for the proper orientat ion of you r ship to other AIS users to enter this data accurate ly. Example : Length o f ship / convoy = 220m and Beam of ship / convoy = 43 m. GPS ANTENNA location on ship (is x in above Menu example) is located 200 meters[...]

Y1 - 03 -0211 Rev D 6 Sub Menu        No. 1 on the keyboard. Draught: Scroll the Data Fields with [ Enter] [...]

Y1 - 03 -0211 Rev D 7         No. 2 on the keybo ard. Toggle the values for t h e E[...]

Y1 - 03 -0211 Rev D 8 Mask input: Scroll the Data Fields with [ Ente r] and input the UN destination codes as well as the ET A (estimated time o f arrival) data. Save the new settings by pressing [Save], and return t o the Main Menu Screen by pressing [Exit]. Press [Ex it] to return to the M ain M enu without saving any chan ges. String Input: Dire[...]

Y1 - 03 -0211 Rev D 9 1.5 Service and User Passwords WARNIN G: It is very import an t that the Service password not be lost . The default password f rom the factory is m entioned on your AIS display at the protection foil. (see Appendix 7.3 for password information) . Keeping the password in a second location may be wise. Memorizing the password is[...]

Y1 - 03 -0211 Rev D 10 Service Menu Exa mple: Service Pass word Menu Example : Enter the new Password: Then push Enter (M 5). Repeat the new Password: Then Push Enter (M 5). A minimum of 6, a maximum of 8 characters are allowed. Should the new password include numbers, use the shi ft key to generate them. Press Save to s tore the change . N 1 o 21&[...]

Y1 - 03 -0211 Rev D 11 Changing the Use r Password                 number 2 on the keyboa[...]

Y1 - 03 -0211 Rev D 12 Press Save to s tore the changes. 2 NAUTICA ST™ Inland A IS User Interface 2.1 NAUT ICAST Keyboard The NAUTICAS T is fitted wi th a full alphanumeric keyboard, wi th the following functions : By pressing any key on the keybo ard the letters a re addressed. Number symbols and spe cial characters are addressed by holdi ng dow[...]

Y1 - 03 -0211 Rev D 13 2.3 Explanation of the Num-Locked and [NUM] F unctions The NUM -Locked f unction is enabled after pressing the Function [ Fn ] K ey and the Shift [  ] Key. It is possible to disabl e the Num-Loc k Function by pressing the Shi ft [  ] Key. NOTE: The NAUTICAST   [...]

Y1 - 03 -0211 Rev D 14 3 NAUTICA ST Screens The advanced versi on of the NAUTICAST offers three display modes: Navigation Screen - Standard screen, autom atically visible Menu Structu re - Visible after pressing the [Menu] Soft Ke y Graphical User Inte rface - The Gr aphical User Interface is visible after pres sing the [M2] Soft Key (new m ode) 3.[...]

Y1 - 03 -0211 Rev D 15 3.1.1 Own Vessel Data LAT:N 1°27.845'ExtSOG:34.6kn 05/26/06 LON:E 0°21.289'ExtCOG:173.0° 10:52:26 LAT: Latitude LON: Longitude Date: The actual UTC - date (MM.DD.YY) and time (hh.mm.ss) are displayed on the top right hand corner o f this vi ew. IntGPS: 3D A/ ExtHDT:222° Reg6 IntGPS Indicates normal or differenti[...]

Y1 - 03 -0211 Rev D 16 3.1.2 Other Vessel Data 001/021..SHIPNA ME....RNG.BRG ..SOG..COG. . 001/021 (E.g: Vessel 01 of 021) current or selected Vessel/ T o tal number of Vessels (max. 256 Vessels) ShipName: Name of the Ship and AIS  Type: Cl - A: S OLAS Class-A Ship Cl - B: Lei sure Craft Base: B ase station SAR : Search and Rescue Aircra ft RNG [...]

Y1 - 03 -0211 Rev D 17 3.1.4 Other Vessel Deta ils This screen shows the Dynamic, Voyage and Vessel Related Data, which is currently being transmitted by a p reviously selected vessel . Current Time and Selected Vessel Number in V essel Listing: Time 2:07 -------- -------- POS: 0001 /0021 Time : The period of t ime which has elapsed since the last [...]

Y1 - 03 -0211 Rev D 18 This in formation indicates the Re ference Point of the used GPS Anten na onboard the vessel. RefPoint:A190 B120 C10 D<63m A: 190m B: 120m C: 10m D: >63m (means more than 63m in the case of a very large vessel) Vessels Cargo: Indicates the t ype of cargo on board. N/A or harmless Further Vessel Details: Draught : 3.3m D[...]

Y1 - 03 -0211 Rev D 19 To call up the Mai n Menu, press the [ M enu] button once, and all Submenus are displayed. The cursor positi on indicates the sel ected submenu. Menu navigation is achieved by pressing the [Up] or [Down] keys to select, and then by pressing [Enter] to confirm the desi red Submenu sel ection. To escape fr om any Submenu and re[...]

Y1 - 03 -0211 Rev D 20 NOTE: The navi gation screen automaticall y appears after some seconds of user inactivi ty on the transponder, or immediatel y by pressing the [ Menu] button in the Main M enu. 3.4 Sub-Menus Ov erviewMessages 3.4.2 A IS Status 3.4.3 Voyage Settings – (User Password Pro tected) N 1 o 19' E 0 o 12' |1>0.10|2>1[...]

Y1 - 03 -0211 Rev D 21 3.4.4 Ship Settings – (Use r Password Protec ted) 3.4.5 Transpond er Configuration – (User Pass word P rotected) 3.4.6 Service Configura tion – (Service Pass word Protected) N 1 o 19' E 0 o 12' |1>0.01|2>1.30|3>1.80nm ************ Ship Settings ************* Atis Code :max. 7ASCII +------+ ShipName :N[...]

Y1 - 03 -0211 Rev D 22 3.4.7 Display Settings 3.4.8 Graphical Disp lay Settings N 1 o 21' E 0 o 15' |1>0.10|2>1.30|3>1.80nm *********** Display Settings *********** Mode | +- [*] Day Min Max | +---- Brightness:<9> [*********] | +---- Contrast : 6 [****** ] | | +- [ ] Night Min Max + ---- Brightness: 3 [*** ] + ---- Contrast[...]

Y1 - 03 -0211 Rev D 23 3.5 Sub-Menus Detai led 3.5.1 Messages Dynamic Key s: Messages [M5] [Select] Select chosen Submenu [Enter] Confirm Message Submenu Selection [M8] [Back] Return to Mai n Menu Screen [Up] / [Down] Navigate Submenu for Selection Writing Messages: This screen provi des a means to wri te and send mes sages. It is possible to selec[...]

Y1 - 03 -0211 Rev D 24 a) Writing an Addres sed Message To write a Safety Related Message first select an addressee from the Vessel Listing. This is possible by using the cursor buttons [Up] and [Dow n], and confirming the selection with [Enter] or [Select ]. Dynamic Key s: Messages [M5] [Select] Write Message to Selected Vessel [Enter] Write Messa[...]

Y1 - 03 -0211 Rev D 25 Dynamic Key s: Addressed Message Editor [M5] [Send] Send Messa ge [Enter] Send Message [M6] [Channel] Select Transmission Channel [M7] [Channel] Select Transmission Channel [M8] [Back] Return to Vesse l Listing c) Confirmation o f Sent Addressed M essage The confirmation screen shows the successful message transmission and in[...]

Y1 - 03 -0211 Rev D 26       this case the follow ing screen is disp[...]

Y1 - 03 -0211 Rev D 27 e) Confirmation o f Broadcast Sent M essage This Confirma tion Screen shows that the message was successfully transmitted on the Broadcast Setting. By pressing [Back] the user automatically returns to the Message Editor for further Messaging. The [SendTo] returns the user to the Vessel Listing, wi th the option of further M e[...]

Y1 - 03 -0211 Rev D 28 Handling a Long Ran ge Interroga tion (LRI) Default Settin gs for LRI Reques ts: A utomatic Mode : T he LRI is automatical ly dealt with and ow n vessel data is sent. Manual Mode: The LRI needs to be manually handl ed. NOTE: The data whi ch m ay be interrogated via the Long Range Interface can be configured in Menu 5: Con fig[...]

Y1 - 03 -0211 Rev D 29 An LRI has arriv ed; the NAUTICAST Set tings are con figured to Manual Mode : The LRI therefore need s to be manual ly handled (accepted or re jected) Dynamic Key s: LRI in the Inbox History (manual mode) [M5] [OK] Accept LRI Interrogation [M7] [Reply ] Send Addressed Message to LRI Sender [M6] [Reject] Reject LR Interrogatio[...]

Y1 - 03 -0211 Rev D 30 Inbox History: Overview of Received Messages an d Alarms Message Type s: Description ASRM Addressed Safety Related M essage BSRM Broadcast Sa fety Related M essage ALR Alarms (Details  see Al arm Type s) LRI Long Range Inte rrogation Message Status : * Marks a new , unacknowledged mes sage or alarm ! Marks a val id alarm r[...]

Y1 - 03 -0211 Rev D 31 ASRM*13:42 HI GH WINDS IN AR EA! 5004 Addressed Safety Related Message, unacknow ledged by recipient, arrived at 13:42, with t ex t     ALR 13:40 exte rnal EPFS l[...]

Y1 - 03 -0211 Rev D 32 ASRM: Information Time 17:39 Date 11/26 (mm.dd) POS 01/02 (Messa ge 01 of 02) Message Type AddressedSRM Status * (not acknow ledged) MMSI of Sender 5004 Channel Incoming AIS Chann el ACK Message not y et acknowle dged A LR – Reading Incoming A larms: ALR: Information Time 17:36 Date 11/26 (mm.dd) POS 01/1 Message Type ALARM[...]

Y1 - 03 -0211 Rev D 33 h)                  ?[...]

Y1 - 03 -0211 Rev D 34 i)             [...]

Y1 - 03 -0211 Rev D 35 Mod.: A IS Transmission Mode AU Autonomous AS Assigned IN Interrogation/Pol led Mode ?? Unknown Used Channel AIS1, AIS2 Syn.: (UTC source) D UTC direct I UTC indirect B Sync to Base A Sync to mobile w ith the most re ceived stations ( Semaphore) RXVe: Total number of all receiv ed stations by the indiv idual vessel . MMSI: MM[...]

Y1 - 03 -0211 Rev D 36 Reference Point (in meters): This in formation indicates the Re ference Point of the used G PS Antenna onboard the vessel. RefPoint: A190 B1 20 C1 0 D>63m A: 190 m B: 1 20 m C: 10m D: > 16m Vessels Cargo: Indicates the type of cargo on boa rd N/A or harmless Further Vessel Details: Draught : 3.3m Dest : HA WAII ETA : 10[...]

Y1 - 03 -0211 Rev D 37 m) Security Log The Security Lo g is implemented to show the  swi tched off   time s of the transponde r. In standard opera tion, this Lo g should not contain any entries. 3.5.2 Voyage Settings (User Pass word Protected)     Sub[...]

Y1 - 03 -0211 Rev D 38 N 1 o 20' E 0 o 13' |1> N/A|2>0.00|3>0.10nm | ---------------------------------- | Menu -----| | | + - 1. Messages View | + - 2. AIS Status | + - 3 . Voyage Settings -----| + - 4. Ship Settings | + - 5. Transponder Configuration Msg. | + - 6. Service Configuration | + - 7. Display Settings -----| + - 8. Gra[...]

Y1 - 03 -0211 Rev D 39 The password query field appears . Input new User Passw ord and press [Enter].     General Settings           No. 1 on the keyboard.[...]

Y1 - 03 -0211 Rev D 40 NavStat Navigational Status Under way using engine At anchor Not under command Restricted maneuv erability Constrained by her draught Moored Aground Engaged in fishing Under way sailing Undefined     Cargo/Vo yage Settings    ?[...]

Y1 - 03 -0211 Rev D 41   Person s on Board       o . 2 on the keyboard . NOTE: The total number of persons on board will b ?[...]

Y1 - 03 -0211 Rev D 42 Input String: Direct input of the destination string. ETA (estima ted time of arrival) has to be entered separately N 1 o 18' E 0 o 12' |1>0.01|2>1.30|3>1.80nm ************* Destination*************** use mask [ ]/[ *] input string Destination :NLDOR02552LEUVE00000 ETA(MMDDhhmm) :10/31 10:05 ---------------[...]

Y1 - 03 -0211 Rev D 43 Mask input: Scroll the Data Fields with [Enter] and input the UN destination codes as well as the ETA (e stimated time of arriv al) data. Save the new settings by pressing [Save], and return t o the Main Menu Screen by pressing [Exit]. Press [Ex it] to return to the Main M enu without saving any chan ges. Toggle back to ?[...]

Y1 - 03 -0211 Rev D 44 3.5.3 Ship Settings (User Pass word Protected)     or press No. 4 on t he keyboard. NOTE: Please see App endix 7. 3 for password information Input your User Pa[...]

Y1 - 03 -0211 Rev D 45 Example: Length (of the co mplete conv oy) = 400m Beam (of the co mplete conv oy) = 32m Internal GPS-Antenna is mounted 20 metres from stern and 24 me tres from starboa rd. Length(Conv) : 400 Beam(Conv) : 32 RefPtExt : RefPtInt : B20D24 (no spaces, no decimals, no commas) The full line as sho wn will be displ ayed after press[...]

Y1 - 03 -0211 Rev D 46 After the Ship Set tings hav e been input and saved , this screen appea rs . [Exit] takes the use r back to the Mai n Menu. GPS A ntenna Mounting It is important to input the exact m ounting position of the GPS Antenna on the vessel as this influences the accu racy o f the displayed target in an ECDIS. (RefPntExt:) = T he pos[...]

Y1 - 03 -0211 Rev D 47 3.5.4 Transpond er Configuration (User Password Protected) The Configuration Menu allows the user t o al ter the hardware-based parameters. User Password Con figuration is also unde rtaken here. A ccessing the Configuration Settings: The Configurati on Menu is User Passw ord protect ed. NOTE: Please see App endix 7.3 for pass[...]

Y1 - 03 -0211 Rev D 48 Incorrect User Pas sword Inpu t If the incorrect User Passw ord is input, the scre en below appears. Dynamic Key s: User Pass word Input (A ccess Denied) [M5] [Exit] Return to Vessel Listing a) Change User Pas sword (for initial NAUTICA ST Operation) It is strongly recommended t o change the default User Password upon initial[...]

Y1 - 03 -0211 Rev D 49 Dynamic Key s: Initial User Pass word Setting [M5] [Enter] Confirm User Password Input [M8] [Back] Return to Menu Configuration This screen appears if the new User Passwords are mismatched - i.e. the New User Password and the Repeated New User Passwor d are not identica l. In this case, it is possible t o re -input both the N[...]

Y1 - 03 -0211 Rev D 50 The new User Passw ord configuration has been saved. b) Region Settin gs A Region is a def ined area, with specific VHF parameters, which are sent out by Vessel Traffic Service Sta tions (VTS), and received vi a Digital Selective Ca lling (DSC) or AIS. The screen show s a list of Regions, and their input sou rces. When the v [...]

Y1 - 03 -0211 Rev D 51 Overvie w of Region Settings Name Region Number Number of pre-defined Region Valid OK Status of Region Setting - OK: Stored and Valid Source A:AddrChM A: Addressed Channel Management (Msge. 22) Source: VTS via AIS B:BcastChM B: Broadcast Channel Management (Msge. 22) Source: VTS via AIS C:AIS_ChAs C: AIS Channel Assignment Se[...]

Y1 - 03 -0211 Rev D 52 Input Modes fo r New Regions Data Field Field Description Input Modus A dditional Information NE LAT(1) Latitude N/E co rner Manual Input Degrees and minute s NE LON(1) Longitude of N/E corner Manual Input Degrees and minute s S W LA T(2) Latitude of S/ W corner Manual Input Degrees and minute s S W LON(2) Longitude of S/ W c[...]

Y1 - 03 -0211 Rev D 53 d) Interrogation Set tings This screen allows sett ings for m odes of r e sponse to Long Range Interrogation Requests (LRI). It is possible to set the AIS station to respond automatically or manually to LR Interrogations, and determine which vessel data may be interrogated. It is further possi ble t o reply t o ?[...]

Y1 - 03 -0211 Rev D 54 Replying to a Long Range Interroga tion Requ est: The arrival of an LRI is show n in the Navigation Screen (top right hand corner: * 1L ) The detailed LRI is automatically stored in Menu 1:Messages, Submenu: 6 I nbox LRI, whe re the request can be read and replied to . Dynamic Key s: Replying to a LR Inte rrogation [M5] [OK] [...]

Y1 - 03 -0211 Rev D 55 e) Sensor Settin gs Within this service password protected men u t he NAUTICAS T offers the following configuration option s: Set up data speed 4800 /9600/38400 baud . Monitor the connec ted sensor input s for each se nsor channel . Verify and edit the Sensor Con figuration on the display screen. Analyze the in formation rece[...]

Y1 - 03 -0211 Rev D 56 f) Inland AIS Con figuration / Blue Si gn This screen allow s the user to toggle the quality o f the speed , course or heading information received from an external dev ice. These settin gs are normall y set to low. NOTE: It is hi ghly recommended to keep the se ttings on low. Blue Sign: Toggle the value f rom <not availab[...]

Y1 - 03 -0211 Rev D 57 3.5.5 Service Configura tion (Serv ice Password Protected) The Service Conf i guration Menu allows initial configuration of the Service Password, Password Settings (on/off), MMS I/IMO Numbers a nd the option of resetting the NAUTICAST to Factory Settin gs. The Service Password is required in order to enter the Servi ce Config[...]

Y1 - 03 -0211 Rev D 58 g) Change Service Passw ord This screen provides a means to indiv idually configure the Service Passw ord. This password                ?[...]

Y1 - 03 -0211 Rev D 59 h) User Password Set tings Change User Pass word Protection : This function allows the user to enable or disable the User Password Query Function. For security reasons, it is hig hly recomm ended t o enable User Password Protection in order to avoid unauthoriz ed Transponder ope ration. After the settings have been input and [...]

Y1 - 03 -0211 Rev D 60 i) Changing the MMSI / IM O / DAC / ESN Nu mbers Mention ed DAC and ESN number s are only availabl e in Inland AIS - M ode .           [...]

Y1 - 03 -0211 Rev D 61        No. 4 on the keyboard. Input new DAC / ESN Numbers and press [ Sav e] to st o[...]

Y1 - 03 -0211 Rev D 62 j) Changing the A IS Mode                 press No. 6 on [...]

Y1 - 03 -0211 Rev D 63                 No. 5 on the keyboard. [...]

Y1 - 03 -0211 Rev D 64 k) Restore Factory Settings CAUTION: By acknowl edging the r eturn to Factory Settings Command , all previ ous settings, both the User and Service Passw ords and all ma nually input data are automatical ly deleted! After pressing [OK] - button, the NAUTICAST will r estarts automatically and restore the factory settings! It st[...]

Y1 - 03 -0211 Rev D 65 3.5.6 Display Settings It is possible to choose from Daylight and Nightlight Display Settings; it is further possible t o adjust the Brigh tness and Contrast Settings for both Di splay Settin gs. The maximum se tting for Bri ghtness and Contra st is <9>, the minimum setting is <0>. It is possible to aut o maticall[...]

Y1 - 03 -0211 Rev D 66 The main features of this Graphi cal User Interface (GUI) are the two new view options: - Radar View The typical w ay of presenting t raffic informati on on screens - Fairway Vi ew This type of view is oriented to the current course over ground (COG) and supports the operator w ith information related to this particul ar regi[...]

Y1 - 03 -0211 Rev D 67 3.6.1 Switching bet ween the Vie ws Navigation Screen pressing [M2] leads to Rad ar View pressing [M2] leads to Fair way Vie w pressing [M2] leads y ou back to Navigation S creen LAT:N 1 o 27.845'ExtSOG:34.6kn 05/26/2006 LON:E 0 o 21.289'IntCOG:173.0 o 10:52:26 IntGPS: 3D ExtHDT:222 o Reg6 A/ 001/021..ShipName....RN[...]

Y1 - 03 -0211 Rev D 68 3.6.2 The Radar Vie w This screen provides the user with a commonly used way of representing ship objects on an electronic device. T he Radar View is nort hern orientated, as indicated by the compass on the very right top of the screen. The Elements of the Radar Vie w: Own Ship: A symbol for the own ship is displayed in the m[...]

Y1 - 03 -0211 Rev D 69 Dynamic Key s: Radar Vie w [M1] Set filter option on AIS Targets [M2] Switch betwee n the views [M3] Show alarm w indow [M5] Acknowledge alarms or safety rela ted messages (SRM) [M7] Acknowledge SRM and reply [Menu] Selects the M ain Menu [Up] / [Down] / [Left] / [Right] Activate the mini mized radar vi ew [FN] + [Up] / [Down[...]

Y1 - 03 -0211 Rev D 70 This screen show s a 1 step scrolling in a southern direction. This screen show s a 2 step scrolling in a southern direction. The Minimized R adar Vie w The minimiz ed radar view shows a split screen. O n the left hand side a Ship List is display ed, on the right hand side a minimized view of the Radar View is visible. This v[...]

Y1 - 03 -0211 Rev D 71 The Elements in the Minim ized Radar Vie w: “Message Write” Button: By pressing the [M4] butt on , a m essa ge can be sent to an AIS target t h at is currently selected in the Ship Lis t. Ship List: This list shows the same targets as shown in the Nav igation Screen. Ship List / Mini mized Vie w Switch: This switch indica[...]

Y1 - 03 -0211 Rev D 72 Ship Details If a targe t is selec ted by pressing [Enter], whether in t he Ship List or direct ly in the graphical view, the correspondi ng ship detail s are displayed instead of the mini mized vi ew. Pressing [Up] or [ Dow n] scrolls t he ship detail list by line, [Left] or [Right] by page. [M8] returns to the mini mized vi[...]

Y1 - 03 -0211 Rev D 73 Compass Own Ship AIS Targets Horizontal Lines Fairway Lines[...]

Y1 - 03 -0211 Rev D 74 The Elements in the Fair way Vie w: Compass: Shows the current COG. Fairway Lines : The Fairway Lines are border lines of a virtual fairway oriented on t he actual course over ground. A IS-Targets : Other AIS targets received via V HF are displayed, if their distance is within the r an ge of the current zoom lev el. Own Ship:[...]

Y1 - 03 -0211 Rev D 75 Zoom Level 2 would look like this: The Minimized Fa irway Vie w The minimized Fairway View sho w s a split screen. O n the left hand side a Ship List is display ed and on the r i ght hand side a minimiz ed Fairway View is seen. This view is display ed, if one of the cursor key s is pressed. Fairway Vi ew  [Up] | [Dow n] | [...]

Y1 - 03 -0211 Rev D 76 Ship List / Mini mized Vie w Switch: This switch indicates whether targets can be selected fr o m the Ship List or f rom the minimized view. If the arrow above the [M6] points to the left, targets can be selected from the Ship List with the [Up] and [Down] buttons. If the arrow above points to the right, targets can be select[...]

Y1 - 03 -0211 Rev D 77 3.6.4 Message and A larm Handling A larms If an alarm occurs , the sy mbol to the right of the [M 3] button becomes visi ble. Pressing the [M 3] button show s the details of the sel ected alert. Pressing [M5] leads to alarm acknowledgement and the closure of the window as well as the alarm icon disappearing. An alarm could oc[...]

Y1 - 03 -0211 Rev D 78 3.6.5 Configuration of the Grap hical Display General The configuration of the Graphical Display could be accessed over t he entry point 8 of the Main Menu. The Configurati on Menu allow s the user to alter th e parameters of the G raphical Di splay. A ccessing the Configuration Settings: The Configurati on Menu is User Passw[...]

Y1 - 03 -0211 Rev D 79 Sub-Men u Content Fairway Vi ew Scale Settings of the Geo metry and Scale o f the Fairway Vi ew Fairway Vi ew Symbols Symbol sett ings of t h e Fairway View (also the minimized Fai rway View ) Radar View Symbols Symbol settings of the Radar View (also the minimized Radar Vi ew) Other Graphical Se ttings AIS-target filte r set[...]

Y1 - 03 -0211 Rev D 80 NOTE: The Fairw    The f ollow ing drawing illustrates the parame ters fr om the Fairway View Scale Menu and additionally presents the transfor mation process from the Radar View to the Fai rway Vi ew. 10 nm Horizontal line 260° 325.[...]

Y1 - 03 -0211 Rev D 81 Fairway View Symbols Dynamic Key s: Fairway View Symbols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu The symbols for the own ship and for other tar gets could be selected individually . Followi ng symbols are av ailable: Parameter Symbol Standard Standard + Vecto rs Standard Solid Standard Sol[...]

Y1 - 03 -0211 Rev D 82 Radar Vie w Symbols Parameter Symbol Standard Standard + Vecto rs Standard Solid Standard Solid + Vec tors Solid Reduced (3x3) NOTE: Other Sy mbols (i.e.: for a Base Station) ar e fixed Dynamic Key s: Radar Vie w Symbols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu N53°31 E10° 1 |1>0.69|2&[...]

Y1 - 03 -0211 Rev D 83 Other Settings Inside t his menu it is possible to adjust the graphical view t o your demand. The available functions cover the topics: o AIS-t a rget filter settin gs o Enabling / disabling the A uto Zoom feature w ith max. nu mber of ships o Alarm appearance Dynamic Key s: Other Settings [M5] [Save] Save the settin gs [M8] [...]

Y1 - 03 -0211 Rev D 84 Save On all of t he described options inside the Configuration of the Graphical User Interface you could save y our settings by pressing the [M2] Butt on. Dynamic Key s: Other Settings [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu 4 Safety Functions The NAUTICAST is f i tted with Safety Keys, wh[...]

Y1 - 03 -0211 Rev D 85 4.1 MOB Person over B oard By pressing the MOB button the current navigation position of own vessel and time of incident is automat icall y saved. The MOB message containing the distress informa tion        prepared [...]

Y1 - 03 -0211 Rev D 86 4.2 A ctivating the SRM Safety Related Message Button The desired Distress M essage Text can be selected by pressing the appropriate number on the keyboard. By pressing t he [Exit] button, it is possible to escape fr om this screen without sending the SRM Message. NOTE: If no Message Subject is selected, the message is automa[...]

Y1 - 03 -0211 Rev D 87 Dynamic Key s: Send SRM Message [M5] [Send] Send selected SRM Message [M8] [Back] Return to SRM Message Selection Confirmation o f sent SRM: Upon sending the SRM t o all vessels the Broadcast Transmission Status is shown. The Broadcast Transmission Status Screen shows confirmation of sent message and allows the user to return[...]

Y1 - 03 -0211 Rev D 88 NOTE: The SRM message tr ans mission is automaticall y repeated every 180 seconds until the [Stop] button has been pressed . Each SRM Message that is sent out every 180 seconds contains updated navigation information o f own vessel posi tion and actual time . Dynamic Key s: SRM Message View [M5] [Stop] Discontinue SRM Message[...]

Y1 - 03 -0211 Rev D 89 5 Troublesho oting 5.1 Reading and unde rstanding A larms: The NAU TICAST differentiates between Alarm and TXT messages. An Alarm informs the user about ma jor system malfunction s and faili ngs in the connected senso rs. The Alarm Status infor ms t he user about all active Alarms. The Alarm will be disabled and deleted from [...]

Y1 - 03 -0211 Rev D 90 5.2 A larm Codes ID Description Text Cause/Source System Reaction / Remedy 01 AIS: Tx malfunction VHF Antenna, cabling Reaction: The transponder unit stops transmission. If Alarm ID 01 and ID 02 are simultaneously displaye d, then a major antenna proble m has arisen . Remedy: Check if the antenna is AIS compatible (156-162 MH[...]

Y1 - 03 -0211 Rev D 91 56 AIS: ENTER MMSI NUMBER No v alid MMSI entered.               enter a valid [...]

Y1 - 03 -0211 Rev D 92 6 Contact and Su pport Informat ion Contact your local dealer for NAU TICAST suppo rt. Please see our ACR Website for Se rvice Listing. ACR Electronics Europe GmbH Handelskai 388 / Top 632 A- 10 20 Vienna, Aust ria Tel: +43 (1) 5 237 237 - 0 Fax: +43 (1) 5 237 237 - 150 Email: Technical.Support@ac r-europe.com Web: www.acr-eu[...]

Y1 - 03 -0211 Rev D 93 7 Appen dix 7.1 Explanation of com monly used Abbrev iations Abbreviation Full Text A/B (A+B) AIS Channel 1 / A IS Channel 2 ACK Acknowledgement AddrChM Addressed Channel Management AIS Automatic Identificati on System AIS_ChAs AIS Channel Assignm ent Sentence ALR Alarm AS Assigned ATIS Automatic Transmitte r Identification S[...]

7.2 ERI ship types This table is used to automatical ly convert the selected UN ship types, which are used in Inland message 10, to the IMO type s which are used in IMO messa ge 5. C ode U Ship Name Msg 5 (1- 99) Ship Ty pe - SOLAS Dig1 Dig2 Type (first dig it) Cargo (second digit) 8000 No Vessel, type un known 9 9 Other types of Ship No additional[...]

code U ship name Msg 5 (1- 99) Ship Ty pe - SOLAS dig1 dig2 Type (first dig it) Cargo (Second digit) 8170 V Freightbarge w ith containers 8 9 Tanker No additional in formation 8180 V Tankbarge, ga s 9 0 Other types of Ship All ships of this type 8210 C Pushtow , one cargo barge 7 9 Cargo Ships No additional in formation 8220 C Pushtow , two cargo b[...]

code U ship name Msg 5 (1- 99) Ship Ty pe - SOLAS dig1 dig2 Type (first dig it) Cargo (Second digit) 8441 V Ferry 6 9 Passenger Sips No additional in formation 8442 V Red cross ship 5 8 Medical tran sports - 8443 V Cruise ship 6 9 Passenger Sips No additional infor mation 8444 V Passenger ship w ithout acco modation 6 9 Passenger Sips No additional[...]

7.3 Pass word Settings This AIS transponder has two le vel s of password-      gives access to user-      ?[...]

[...]

[...]

[...]

[...]

[...]

[...]

ACR Electronics Europe Gmb H page 1 of 1 2008-08 EC - DoC Nautica st Inland AIS.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bes tätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 für maritime Ausrüstung, geändert durch die EC Council Dire[...]

ACR Electronics Europe GmbH page 1 of 1 2008-09 EC - DoC Co mrod AC17.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten ben annte Zubehör gleich oder besser dem im unt enstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifie s that the mention[...]

ACR Electronics Europe Gmb H page 1 of 1 2008-10 EC - DoC Comrod AV7.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten ben annte Zubehör gleich oder besser dem im unt enstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifie s that the mentione[...]

ACR Electronics Europe Gmb H page 1 of 1 2008-11 EC - DoC GPS Antenna AIS-A W.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten ben annte Zubehör gleich oder besser dem im unt enstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifie s that the[...]