Acu-Rite 502 manuale d’uso

Instruction Manual SAVE THIS MANU AL FOR FUTURE REFERENCE. Questions? Contact Cust omer Suppor t at ( 8 77) 22 1 - 1 25 2 or visit www . AcuRite .com. CONTENTS Unpac king Instr uctions ........... 2 P ackage Contents .................. 2 Product R egistration ............... 2 Features & Benets: 5-in-1 ....... 3 Features & Benets: Dis[...]

2 Congratulations on y our new A cuRite product. T o ensure t he best possible product perf ormance, please read t his manual in its entirety and retain it for future ref erence. Unpac king Ins tructions Remo v e the protective lm t hat is applied to the LCD screen prior to using this product. Locate the t ab and peel of f to remov e. Pac kage C[...]

3 Features & Benets 7 2 1 9 8 10 5 6 11 4 3 5-IN-1 SENSOR 1 . Rainfall Collector Funnel 2. Solar Cell Panel Conv er ts sunlight into pow er to run internal aspirating f an. Internal Aspirating Fan (not sho wn) Draws ambient air into sensor to reduce solar radiation heating, resulting in more accurate temperature measurement. 3. A-B-C Switch [...]

4 Features & Benets Display 10 37 11 12 9 28 29 31 32 30 33 1 3 4 5 7 8 6 2 19 20 21 22 23 25 26 27 24 36 35 38 13 14 16 15 17 18 34 34[...]

5 1 . Peak Wind Speed Highest speed from past 60 minutes. 2. Wind Speed Alarm On Indicator 3. Average Wind Speed of all speeds from past 2 minutes. 4. Pressure Hist or y Graph Current pressure on right wit h trend (Rising, Steady or Falling). 5. Historical Barometr ic Pressure Pressure reading 1 2 hours ago. 6. Stor m Alert Alarm On Indicator 7 . W[...]

6 Bac k of Display Unit BACK OF DISPL AY UNIT 1 . Bac klight Dimmer Switc h Adjusts display bac klight settings: Of f, low , medium, high 2. Integr ated Hang Hole for easy wall mounting. 3. Batter y Compartment Cover 4. A-B-C Switc h ID code that must matc h 5-in-1 sensor ’s A -B-C switc h to ensure units synchronize. 5. Clear T oday Clears data [...]

7 A B C SETUP 5-in-1 Sensor Setup 1 A-B-C Switch Set to matc h display unit 2 Install Batteries 4 AA Batteries 3 Rain Gauge Stabilizer Remo ve and discar d Set the A-B-C Switc h Locate t he A -B-C switc h inside t he batter y com par tment. Set t he A -B-C switc h to A , B or C. Y ou must select the same le tter c hoices for bot h t he sensor and t[...]

8 Set the A-B-C Switc h The A -B-C switc h is located inside the batt er y compar tment. It can be set to A , B or C. Ho we v er , you must select the same letter c hoices for bot h the sensor and the displa y unit in order for the units to sync hronize. Plug-in Pow er Adapter For the best per f ormance, plug in the power adapter as the main pow er[...]

9 Set t he Time & Dat e The cloc k and calendar are utilized to time stamp histor y records and other data, so it is impor t ant to set t he time and date soon af t er you po w er on the display unit. Set t he Time 1 . Press the up or down arrow buttons until “SET CL OCK?” is displayed on t he Selectable Categor y part of t he display unit.[...]

10 Select Measurement U nits T o select be tween standard units (mph, ºF , e tc.) or metric units (kph, ºC, e tc.): 1 . Press the up or down arrow buttons until “SET UNITS?” is displayed on the Selectable Categor y par t of the display unit. 2. Press the “ ” button to se t the unit pref erence. 3. Press the up or down arrows to select “[...]

11 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding envir onmental conditions. Proper placement of bot h the display unit and t he sensor are critical t o the accuracy and per for mance of this product. Display Unit Placement Place the displa y unit in a dr y area free of dir t and dust. T o ensure accurate temperature me[...]

12 5-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at a minimum height of 5 feet (1.5 meters) off the ground, in an open area. Higher is better for wind measurements - the National W eather Ser vice recommends 33 feet high! MOUNTING OPTIONS The included mounting brac ket is designed to scre w directly onto wooden posts or[...]

13 OPERATION Using t he Professional Weat her Center Learning Mode Self-Calibrating Forecasting use a unique algorithm t o analyze c hanges in pressure o v er a time period (called Lear ning Mode) to deter mine your altitude. Af ter 1 4 days, t he Learning Mode icon disappears from the displa y screen. At this point, t he self-calibrated pressure i[...]

14 Set a Weather Alar m 1 . Choose t he weather categor y for which you wish to set an alar m by pressing the up or down arrow buttons until the categor y is displayed on the Selectable Categor y part of t he display unit. 2. T o program a value (only applies to alarms t hat require a value), press AND HOLD the “ ” button until t he “SET” i[...]

15 Problem Possible Solution No outdoor sensor reception no bars • Relocate the display unit and/or t he 5-in-1 sensor . The units must be within 330 f t (1 00 m) of each ot her . • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may inter f ere with the wireless communication (suc h as T Vs, microw aves, compu[...]

16 Problem Possible Solution Inaccurate temperature or humidity • Make sure both the displa y unit and sensor are placed away from heat sources or v ents (see p. 1 1). • Make sure both units are positioned away from moisture sources (see p. 1 1). • Make sure sensor is mounted at least 5 ft of f t he ground. • Calibrate indoor and outdoor te[...]

17 Care & Maintenance Display Unit Car e Clean with a sof t, dam p cloth. Do no t use caustic cleaners or abrasiv es. K eep away from dust, dirt and moisture. Clean ventilation por ts regularly wit h a gentle puf f of air . 5-in-1 Sensor Care Clean the Sensor Clean with a sof t dam p cloth. Do no t use caustic cleaners or abrasiv es that will m[...]

18 3. Press the up or down arrow buttons to calibrate the data value higher or low er from the actual reading. 4. Press the “ ” button to conr m the calibration adjustment. Note: The “C AL ” icon remains illuminated next to calibrated values. Calibrate t he Rain Gauge The rain gauge on the 5-in-1 sensor can be calibrated to im pro ve acc[...]

19 FCC Information This device complies with par t 1 5 of FCC r ules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interf erence, and 2- This device must accept any interference received, including inter ference that may cause undesired operation. W ARNIN G: Changes or modications to this unit not ex[...]

20 At AcuRite, we proudly uphold our commitment to quality tec hnology . Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. W e recommend t hat you visit us at www .AcuRite.com for [...]

21[...]

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy- rights are the property of their respective owners. AcuRite uses patented technology . Visit www .AcuRite.com/patents for details. Printed in China 00502 INST 070 1 14 It’ s More than A[...]