ADC T1MF2S04RA manuale d’uso

HiGain ® Managed Shelf 19-inch, 3190 Mechanic, 22-Slot Managed CO Shelf (HMS-318 List 3) User Manual Document Number: L TPH-UM-1261-01 Product Catalog: HMS-318 List 3 CLEI: T 1MF2S04RA[...]

R EVISION H ISTORY The Revision Histo ry provides a summary o f any changes in this manual. Please make sure you are using th e latest revision of this ma nual. December 20, 2004 This manual is available online at ADC’ s website ( www .adc.com/doc umenta tionlibrary/) or you can order cop ies of the manual by cont acting your sales represent at i[...]

T able of Content s L TPH-UM-1261-01 iii About This Manual ....... ................................. ........................................................ .......... ix Introduction ....................... .................................................................................... ....... ............. ix Audience ......................[...]

T able of Contents December 20, 2004 iv L TPH-UM-1261-01[...]

List of Figures L TPH-UM-1261-01 v Figure 1-1. HMS-318 List 3 Sh elf - Front View .......... ......................................................... 1-2 Figure 1-2. HMS-318 List 3 Sh elf - Rear View .. .......................................... ........................ 1-3 Figure 1-3. Input Power T erminal Bl ock (TB1) ......... .................[...]

List of Figures December 20, 2004 vi L TPH-UM-1261-01[...]

List of T ables L TPH-UM-1261-01 vii T able 1-1. HMS-318 List 3 Shelf Re ar-Panel Connections (LPS-300C) .................. ............ 1-4 T able 1-2. Alarms Wire-wrap Field Functional Description .. .............. ............... ........... ........ 1-7 T able 1-3. J26 – RS-232/X.25 Management Port (DTE) ........ ................ ............[...]

List of T ables December 20, 2004 viii L TPH-UM-1261-01[...]

L TPH-UM-1261-01 ix A BO UT T HIS M ANUAL I NTROD UCTION This manual provides essent ial information abou t the HiGain ® Management Shelf (HMS-318 List 3) along with step- by-step instructions on how to install the shelf into a Central Of fice (CO) or telco-style equipment rack. A UDIENCE This manual is written for people who install and plan th e[...]

About This Manual December 20, 2004 x L TPH-UM-1261-01 C ONVENTIONS The following style conventions and term inology are used throughout this guide. Appendix A: Signal and Pin Assignments Lists Tip and Ring signal and pin assignments to the HMS-318 List 3 shelf, including: • P1-DSX-1 Receive or xDSL B IN, T ip and Ring • P2-DSX-1 T ransmit or x[...]

December 20, 2004 About This Manual L TPH-UM-1261-01 xi EU C OMPLIANCE The product complies with the requirement s of the Low V o ltage Directive 7 3/23/EEC, EMC Directive 89/336/EEC, and the R&TTE Directive 1999/5/EC Articles 3.1 a and 3.1b. S AFETY G UIDELINES The following safety guidelines are presented to help you avoid injury to yourself [...]

About This Manual December 20, 2004 xii L TPH-UM-1261-01 I NSPECTING Y OUR S HIPMENT Upon receipt of the equipment: • Unp ack each conta iner and visually inspect the content s for signs of damage. If the equipment has been dam- aged in transit, immediately repor t the extent of dam age to the transpor tation company an d to ADC. Order replacemen[...]

L TPH-UM-1261-01 1-1 1 Chapter P RODUCT D ESCRIPTION The HMS-318 L3 is a 22-slot, 3190 mechanics shelf that is capable of be ing managed locally or remotely . It can be mounted in a 19-inch rack and is fully NEBS 3 and UL-60950 complaint. The ADC HiG ain ® Manageme nt Shelf (HMS-318 List 3) weighs approxi mately 17 pounds (7 .7 kg). It measures 17[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-2 L TPH-UM-1261-01 T YPICAL HMS -318 L IST 3 S HELF A PPLICATIONS Capable of using various co mponen t s in different types of applications, the HMS-318 List 3 shelf is designed as a very adaptab le shelf. It can be used in the following applications: • Managed HDSLx configura tion - HMU- 319 ([...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-3 HMS-318 List 3 Rear V iew The HMS-318 List 3 she lf input power , 5- position terminal block (l abeled TB1) and th e alarms (labele d Alarms) wire- wrap connections are located on the rear panel (see Figure 1-2 ). The Bon ding (Safety gr ound) is lo cated on the upper right cor n[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-4 L TPH-UM-1261-01 T able 1-1. HMS-318 List 3 Shelf Rear-Panel Connections (LPS-300C) Connector/T erminal Block Connector T ype Connectory Label Description J24 BNC-T (Female) 10 BASE-2 10BASE-2 Management Port J25 RJ-45 10 BASE-T 10BASE-T Management Port J26 RS-232 DB-25 (Female) OS RS232 DTE PO[...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-5 P OWER AND A LARM C ONNECTIONS The HMS-318 List 3 shelf has a separate split input powe r (TB1) and an Alarms wire-wrap fie ld (TB2). The following paragrap hs pro vide information abou t TB1 and TB2. Safety Precautions Observe the following genera l precautions and recommendatio[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-6 L TPH-UM-1261-01 Alarms Wire-Wrap Field T erminate the alarm leads from the CO alarm system to the HMS-318 List 3 s helf. The Alarms wire- wrap field (TB2, see Figure 1-2 ) is a 26-pin wire-wrap connector and provides a central connection point to the Normally Closed (NC), Common (COM), and Nor[...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-7 In the HMU/HLU configuration, for example, for detailed in formation ab out the different ty pes of alarms, refer to the “Managing Alarms” section in the HMU-31 9, H2TU-C-319, or H4TU-C-319 User Manuals . S pecifically , the manual describes the types of alarms the HMU-31 9 r[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-8 L TPH-UM-1261-01 C ONNECTING TO HDSL, HDSL2, AND HDSL4 C IRCUIT S The following paragraphs provide info rmation on making DSX-1 and HDSL, HDSL2, and HDSL4 connections to the HMS-318 List 3 shelf. Plug-in Connections DSX-1 and HDSL, HDSL 2, or HDSL4 DSX-1 connections to the HM S- 318 List 3 shel[...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-9 Figure 1-5. HLU Slot Wi re-w rap Pinouts for HDSL Circuit s Figure 1-6. HLU Slot W ire-wrap Pinouts for HDSL2 Circuit s DSX -1 Ti p (I N ) DSX -1 Tip 1 (OUT) DSX -1 Ri ng (OUT) A B C D E F J H Err or Alarm B us Ground (GND ) HDS L Loop 1 - Tip Manag em ent Bus* F rame G round - 4[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-10 L TPH-UM-1261-01 Figure 1-7. HLU Slot W ire-wrap Pinouts for HDSL4 Circuit s C ONNECTING S PAN P OWERED X DSL C IRCUIT S TO THE HMS-318 L IST 3 S HELF The following paragrap hs pro vide information on maki n g S pan Powered xDSL connections to the HMS-318 List 3 shelf. Sp an Powered xDSL Plug-[...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-1 1 Wire Wrap Connections – S pan Powered xDSL Figure 1-8 shows the LPS-300C slot pinout s on the HMS-318 List 3 shelf rear panel for xDSL circuits . Figure 1-8. HLU Slot Wi re-wrap Pinout s for Sp an Powered xDSL xD SL A IN xD SL B IN A B C D E F J H Gr ound ( GND) xDSL A OU T x[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-12 L TPH-UM-1261-01 RS-232/X.25 R EMOTE M ANAGEMENT P ORT S T wo EIA RS-232 communications port s, J26 (l abeled OS RS232 POR T) and J27 (labeled AUX RS232 POR T), located on the HMS-318 List 3 shelf rear panel (see Figure 1-9 on page 12 ), pr ovide optional OS and AUX management interfaces for c[...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-13 T able 1-4. J27 – AUX RS-232 Management Port (DTE) E THERNET R EMOTE M ANAGEMENT P ORT S The BNC connector J24 (labeled 10 BASE-2), see Figure 1-10 , can be used to co nnect the management p orts of up to 32 shelves into an integrated network through a 10 BAS E-2 (Thinnet) Eth[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-14 L TPH-UM-1261-01 Figure 1-1 1 shows a typical example of a CO equipment rack la you t usin g HMS-318 List 3 shelves. The figure shows a rack with a fuse panel, eight HMS-318 List 3 shelves, each separate d by a two rack sp ace baffle with the remaining shelf space o pen. As the figure illustra[...]

December 20, 2004 Chapter 1: Product Description L TPH-UM-1261-01 1-15 A IR F LOW G UIDELINES T o ensure adequate air flow throug h the telco-style equipment rack, it is recommend ed that you maintain a clearance of at least 6 inches (15.2 cm) in t he front and the back of the rack at all times. If airflow through the telco-st yle equipment rack an[...]

Chapter 1: Product Desc ri ption December 20, 2004 1-16 L TPH-UM-1261-01[...]

L TPH-UM-1261-01 2-1 2 Chapter I NSTALLATION This section provides specific informati on about pre paring you r site for installa tion. Included are specific prep aratory information, safety guidelines, specific rack-mounting guidelines, adapter br acket mounting, ra ck mounting, DSX and HDSL or S pan Powered xDSL connection s, and powe r and alarm[...]

Chapter 2: Installation December 20, 2004 2-2 L TPH-UM-1261-01 Unp acking and Checking the Content s of your Shipment The shipping package for the HMS-318 List 3 is designed to reduce the poss ibility of product damage associated with routine material handling experienced during shipm ent. T o reduce the potential damage to the product, transport t[...]

December 20, 2004 Chapter 2: Inst allation L TPH-UM-1261-01 2-3 Required T ools The following tools are required to install the shelf: • Groundin g or ESD-preventive wrist strap • #2 Phillips-head screwdriver • #1 Phillips-head screwdriver • S traight-slot-head screwdriver • Cable prep aration tools •A 5 / 16 -inch open-en d wrench • [...]

Chapter 2: Installation December 20, 2004 2-4 L TPH-UM-1261-01 S AFETY G UIDELINES The safety guidelines (see Chapter 1: “Safety Guidelines” on page 1-iv ) are provided to help ensure your safety and to protect your equipment. The list on page iv may not identify all potentially hazardous situatio ns in your working environment, so be alert and[...]

December 20, 2004 Chapter 2: Inst allation L TPH-UM-1261-01 2-5 Adapter Bracket Mounting Procedure (19-inch T elco-style Equipment Rack) Adapter bracket placeme nt depends on t he type of telco-style rack you plan to use to inst all the HMS-318 List 3 shelf. First, check the mounting adapter bracket s on the shelf to determin e whet her the factory[...]

Chapter 2: Installation December 20, 2004 2-6 L TPH-UM-1261-01 Adapter Bracket Mounting Procedure ( E TSI-style Equipment Rack) T o mount the adapter brackets for a 600-mm ETSI-style Eq uipment Rack, mount the HMS- 318 List 3 shelf to the adapter brackets as described in this procedure . Perform the following procedure to mount the HMS-318 List 3 s[...]

December 20, 2004 Chapter 2: Inst allation L TPH-UM-1261-01 2-7 Rack Mounting Procedure T o secure the HMS-318 List 3 shelf to the telco-style r a ck, you must use the mountin g screws provided or follow your local practices for installing the shelves into your telco-style equipment rack. Ensur e that the adap ter brackets have been securely fasten[...]

Chapter 2: Installation December 20, 2004 2-8 L TPH-UM-1261-01 DSX and HDSL Connector Procedure S PA N P OWERED X DSL C ONNECTIO NS Perform the following procedure to conne ct the S pan Power ed xDSL interface cables to connectors P1, P2 , P3 and P4 (see Figure 1-2 on p age 1-3 for connector location and “Connecting S pan Powered xDSL Circuit s t[...]

December 20, 2004 Chapter 2: Inst allation L TPH-UM-1261-01 2-9 B ONDING (S AFETY ) G ROUND , P OWER AN D F RAME G R OUND , A LARM , AND O PTIONAL F AN I NPUT S Bonding (safety) ground, power and fr ame gro und, and al arm connections and cabling are marked for ease of installation [see ground lug location (labeled BONDING WIRE MIN #10 A WG)], TB1,[...]

Chapter 2: Installation December 20, 2004 2-10 L TPH-UM-1261-01 Figure 2-1. Grounding Lug Ste p Action 1 Looking at the HMS-318 List 3 rear panel, find the ground lu g location (labe led BONDING WIRE MIN #10 AWG) on the upper right corner extension of the right panel (see F igure 2-1 ). 2 Measure between the telco-style rack and the HMS-318 Li st 3[...]

December 20, 2004 Chapter 2: Inst allation L TPH-UM-1261-01 2-1 1 Power and Frame Ground Procedure Figure 2-2. Input Power T erminal Block (TB1) Alarms Procedure ! IMPORT AN T T o avoid voltage differenc es from building up between the shelf ground (GND) bus and the ground pins of the management terminal that connects to the RS-232 ports, conne ct [...]

Chapter 2: Installation December 20, 2004 2-12 L TPH-UM-1261-01 Optional Fan Alarm Procedure Figure 2-3. Alarms Wire-wrap Field (TB2) Note: The F AN terminals wire-wrap field provides access to the Normally Open (NO), Form A fan relay contact located on the HMU-319 management unit. A te m perature monitor activates this fan relay when the shelf tem[...]

December 20, 2004 Chapter 2: Inst allation L TPH-UM-1261-01 2-13 I NST ALLING THE HMU-319 WITH HLU-319, H2TU-C-319, H4TU-C-319 Install th e line units (HLUs) into slot s 1 through 22 and the HMU-3 19 management unit in to slot 23 of the HMS-318 List 3 shelf (see “HMS-318 List 3 Shelf - Front View” on pa ge 1-2 for slot location). Inst all HMU a[...]

Chapter 2: Installation December 20, 2004 2-14 L TPH-UM-1261-01 Inst all LPS- 300C Procedure A TTENTION Use anti-static wrist-straps connect ed to the ESD Jack (located on the right adapter bracket, see Figure 1-1 on page 1-2) when inserting a circuit card. Avoid touching components on the circuit card. Ste p Action 1 Hold the LPS-300C Power Module[...]

L TPH-UM-1261-01 A- 1 A Appendix S IGNAL AND P IN A SSIGNMENTS The T ip and Ring signal and pin assignment s to the HMS-318 Li st 3 shelf are: • P1-DSX-1 Receive or xDSL B IN, Tip and Ring (see T able A-1 ) • P2-DSX-1 Transmit or xDSL A IN, Tip and Ring (see T able A-2 on page A-2 ) • P3-HDSL S pan 1 or xDSL A OUT , T ip and Ring (see T able [...]

Appendix A: Signal an d Pin Assignments December 20, 2004 A-2 L TPH-UM-1261-01 Connector P2 - DSX-1 T ransmit or Sp an Powered xDSL (xDSL A IN) T able A-2 provides signal and pin assignment information for making DSX-1 transmit or S pan Powered xDSL (xDSL A IN) circuit connections to the HMS-318 List 3 shelf. T able A-2. P2-DSX-1 T ransmit or Sp an[...]

December 20, 2004 Appendix A: Signal and Pin Assignmen ts L TPH-UM-1261-01 A-3 8 Ring 34 9 Tip 9 Ring 35 10 Tip 10 Ring 36 11 Tip 11 Ring 37 12 Tip 12 Ring 38 13 Tip 13 Ring 39 14 Tip 14 Ring 40 15 Tip 15 Ring 41 16 Tip 16 Ring 42 17 Tip 17 Ring 43 18 Tip 18 Ring 44 19 Tip 19 Ring 45 20 Tip 20 Ring 46 21 Tip 21 Ring 47 22 Tip 22 Ring Cable Pin Numb[...]

Appendix A: Signal an d Pin Assignments December 20, 2004 A-4 L TPH-UM-1261-01 Connector P3 - HDSL S pan 1 (H DSL, HDSL2, or HDSL4) or Sp an Powered xDSL (xDSL A OUT) T able A-3 provides connector P3 signal and pin assignment information for making HDSL S pan 1 (HDSL, HDSL2, or HDSL4) or S pan Powered xDSL (xDSL A OUT) connections to the HMS-318 Li[...]

December 20, 2004 Appendix A: Signal and Pin Assignmen ts L TPH-UM-1261-01 A-5 Connector P4 - HDSL S pan 2 (HDSL, HDSL2, or HDSL4) or Sp an Powered xDSL B OUT T able A-4 provides signal and pin assignment information for making HDSL S pan 2 ( H DSL, HDSL2, or HDSL4) or S pan Powered xDSL (xDSL B OUT) connections to the HMS-318 List 3 shelf. T able [...]

Appendix A: Signal an d Pin Assignments December 20, 2004 A-6 L TPH-UM-1261-01 12 Ring 38 13 Tip 13 Ring 39 14 Tip 14 Ring 40 15 Tip 15 Ring 41 16 Tip 16 Ring 42 17 Tip 17 Ring 43 18 Tip 18 Ring 44 19 Tip 19 Ring 45 20 Tip 20 Ring 46 21 Tip 21 Ring 47 22 Tip 22 Ring Cable Pin Number Slot Card Slot Pin Number[...]

L TPH-UM-1261-01 B- 1 B Appendix S TANDARD PIC C OLOR C ODE This appendix list s the standard PIC color codes in tab ular format with the Pair Number cross-reference d with the colors of the T ip and Ring wires used by the installer . T able B-1. St andard PIC Color Code Pair Number Tip Ring 1 White Blue 2 White Orange 3 White Green 4 White Brown 5[...]

Appendix B: S tandard PIC Color Code December 20, 2004 B-2 L TPH-UM-1261-01[...]

L TPH-UM-1261-01 C- 1 C Appendix C IRCUIT C ARD P REVENTIVE M EASURES This appendix describes the prev entive measures that should be observed for the following: • Handling and storing of circuit cards. • Inst alling/replacing circuit cards sensitive to st atic elec tricity . H ANDLING C IRCUIT C ARDS Damage to circuit cards, p articular ly t h[...]

Appendix C: Circ uit Card Preventive Measures December 20, 2004 C-2 L TPH-UM-1261-01 Circuit Card Ejector T ab or Built-in Thumb Hold Most circuit cards have an ejector tab that is used to assist the installer in inserting and removing each circuit card. These ejector tabs are typically located at either the top or bottom of the ci rcuit card. Othe[...]

L TPH-UM-1261-01 D- 1 D Appendix S PECIFICATIONS Power Requirements CO Battery Voltage -48 Vdc nominal (- 42.5 Vdc to -56.5 Vdc) Fuse Maximum 15 A a Compliance NEBS GR-63-CORE, Issue 2 GR-1089-CORE, Issue 3 SR-3580, Level 3 Safety UL/cUL 60950-1 UL/cUL 60950-21 EN 60950-1:200 1 EN 60950-21:2003 EMC EN 300 386-2 V1.1.3 :December 1997 Physical Dimens[...]

Appendix D: S pecificat ions December 20, 2004 D-2 L TPH-UM-1261-01 Accessories Supplied Brackets (attached at factor y) for mounting in either 19-inch (48.3 cm) or 23-inch (58.4 cm) bays Brackets for mounting in ETSI rack Accessories Available Extender Bracket Kit: available in three colo rs: EB-52, gray; EB-52B, black; EB-52P, putty). a.If fuse s[...]

L TPH-UM-1261-01 E- 1 E Appendix P RODUCT S UPPORT ADC Customer Service Group provides expert pre-sale s suppor t and tr aining for all of it s products. T echnical support is available 24 hours a day , 7 days a week by conta c ting t he ADC T echnical Assistance Center . Sales Assistance: 800.366.3891 Quotation Proposals, Orderin g and Delivery Ge[...]

Appendix E: Product Support December 20, 2004 E-2 L TPH-UM-1261-01[...]

L TPH-UM-1261-01 GL-1 G LOSSARY A ACO – Alarm Cutof f AUD – Audible (alarm) AUX – Auxiliary port AW G – American Wire Gauge C CLEI – Common Language Equipment Interface CO – Central Office COM – Common CRIT – Critical (alarm) D DSL – Digital Subscriber Loop DSX-1 – DS-1 Cross-con nect frame E E1 – 2.048 Mbps data rate (Europea[...]

Glossary December 20, 20 04 GL-2 L TPH-UM-1261-01 O OS port – Operator Services port P PIC – Plastic Insulated Conductor R RCV – Receive RMA – Return Material Authorization RX – Receive S SYS ID – System Identifier (alarm) T T1 – 1.544 Mbps data rate (North America n) V VIS – Visible (alarm) W WECO – Western Electric Comp any (now[...]

Certification and W arranty FCC Class A Comp liance This equipment has been tested and found to comply with t he limit s for a Class A digit al device , pursuant to Pa rt 15 of the FCC Rules. These limits are desig n ed to provide reasonable pr otection against harmful interference when the equipment is operated in a co mmercial environmen t. This [...]

World Headqua rters ADC T e lec ommunications, Inc. PO Box 1 101 Minneapolis, MN 55440-1 101 USA For T echn ical Assistance T el: 800.366.3891 HiGain ® Managed Shelf 19-inch, 3190 Mechanic, 22-Slot Managed CO Shelf (HMS-318 List 3) User Manual Document Number: Product Catalog: HMS-318 List 3 L TPH-UM-1261-01 CLEI: T1MF2S04RA ´,w$¶0^¨ 1287040[...]